Log in

Relevant bibliographies by topics / Powe Line Carrier Communication (PLCC)

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers

Academic literature on the topic 'Powe Line Carrier Communication (PLCC)'

Author: Grafiati

Published: 4 June 2021

Last updated: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Powe Line Carrier Communication (PLCC).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Powe Line Carrier Communication (PLCC)"

1

Mohanachandran, Chandralekha, and Srinivasan Sumathi. "SIMULATION OF NARROWBAND POWER LINE CARRIER COMMUNICATION FOR SMART GRID APPLICATIONS." Suranaree Journal of Science and Technology 30, no. 2 (2023): 010219(1–11). http://dx.doi.org/10.55766/sujst-2023-02-e02016.

Full text

Abstract:

For developing a reliable Power Line Carrier Communication (PLCC) system, it is extremely important to know the characteristics of different subsystems in PLCC and power lines. The circuit used to superimpose carrier signal from the transmitter with high potential power lines is termed as line tuners. The design and simulation of a capacitive type line tuner meeting IEC 60481:1974 and IEEE Std C93.4-2012 are included in this article. The wave trap allows the power signal to pass through but blocks the high-frequency carrier signal to reach terminal equipment which works at 50/60 Hertz. Three types of wave traps are studied as part of this paper: single frequency, dual frequency, and wideband wave traps. Impedance characteristics obtained in simulation show effective rejection of carrier signal as desired. The distribution power transformers are an inevitable part of the power line network which offers high attenuation to carrier signal as being inductive it functions as low pass filter. To overcome this problem a bypass circuit which could be incorporated in future power transformers is proposed in this article. The Resistance, Inductance, and Capacitance (RLC) parameter of the power line cable used in the simulation model are derived based on the experimental values observed on an actual 11 kV underground cable and thus replicates actual field conditions. A complete PLCC system with all the above components is presented in this article and can be used as a testbed by designers to validate the MODEM for communication in different topologies by modifying the elements according to actual field conditions.

APA, Harvard, Vancouver, ISO, and other styles

2

Jin, Jiliang, Liyun Xing, Miao Yang, Jianqiang Shen, and Yuqi Dong. "Research on Deterministic Measurement Matrix of Power Line Carrier Compressed Sensing." Journal of Physics: Conference Series 2095, no. 1 (2021): 012017. http://dx.doi.org/10.1088/1742-6596/2095/1/012017.

Full text

Abstract:

Abstract To verify the advantages of deterministic matrix applied to power line carrier communication (PLCC) based on compressed sensing (CS). This article analyzed the research status of commonly used deterministic measurement matrices, and made simulation comparison. It is found that different types of deterministic measurement matrices generated based on chaotic mapping had higher reconstruction accuracy and higher reconstruction efficiency than Gaussian random matrix. Then, according to simulation results and the characteristics of PLCC signal, the Chebyshev sparse circulant (CSC) measurement matrix was designed by combining eighth-order Chebyshev chaotic and the idea of sparse and circulant. Actual circuit measurement shows that when compression rate was 40% and 60%, the reconstruction loss of CSC is 0.72dB and 0.49dB higher than that of Chebyshev chaotic measurement matrix and Chebyshev circulate measurement matrix, respectively. Obviously, the CSC measurement matrix designed in this paper can effectively improve the reconstruction accuracy.

APA, Harvard, Vancouver, ISO, and other styles

3

Wicaksono, Britantyo, and Reza Istoni. "Monitoring Penerangan Jalan Umum Bertenaga Surya Menggunakan Komunikasi Power Line Carrier Communication." ELECTRICES 2, no. 1 (2020): 30–36. http://dx.doi.org/10.32722/ees.v2i1.3589.

Full text

Abstract:

PJU bertenaga surya di Indonesia saat ini telah memiliki kemampuan otomasi tetapi masih belum tersentuh oleh konsep teknologi industry 4.0. sebenarnya sudah banyak riset tentang PJU bertenaga surya yang terkontrol dan termonitoring menggunakan IoT (Internet of Things) baik menggunakan kabel maupun nirkabel. Pada penelitian ini digunakan pendekatan metode komunikasi menggunakan PLCC melalui jaringan PLN 1 fasa. PJU bertenaga surya ini akan mengirimkan parameter-parameter pada panel remote dan solar panel serta terkontrol dari kontrol utama. Terdapat 15 parameter yang termonitor oleh kontrol utama. Dan 1 parameter untuk mode manual sehingga PJU dapat dikontrol langsung dari kontrol utama. PJU ini dimonitor selama 24 jam untuk mengukur pemakaian daya listrik dari LTMS (Long Term Monitoring System) PJU itu sendiri. Hasil dari penelitian ini adalah, pemakaian daya rata-rata LTMS untuk PJU bertenaga surya adalah 0,1 Watt, dan hasil perbandingan perhitungan PM + PdM dengan CBM PJU bertenaga surya adalah LTMS ini akan BEP pada tahun ke-6 sehingga LTMS PJU bertenaga surya secara teknis dan ekonomis layak untuk diimplementasikan pada dunia industri.

APA, Harvard, Vancouver, ISO, and other styles

4

Xiao, Yong, Jie Zhang, Feng Pan, and Yanhua Shen. "Power Line Communication Simulation Considering Cyclostationary Noise for Metering Systems." Journal of Circuits, Systems and Computers 25, no. 09 (2016): 1650105. http://dx.doi.org/10.1142/s021812661650105x.

Full text

Abstract:

In this paper, a comprehensive power line test bed for the automatic meter reading (AMR) system is developed. Such a test bed builds a 220[Formula: see text]V power line environment in which the intensity and types of simulated noise can be configured very flexibly. It facilitates the fast analysis of the running condition of AMR system and power line carrier communication (PLCC). In particular, a new simulation technique, which is dedicated to modeling the power line cyclostationary noise, is proposed in this paper through analyzing many unique power line noise characteristics. It is further integrated with a noise simulator which handles the controllable noise replayer and time-varying loads to make the whole simulation system more salient. The experimental results demonstrate that the proposed simulator is highly effective. Our simulator can handle the communication tests with a wide frequency range, from 10[Formula: see text]kHz to 500[Formula: see text]kHz with high accuracy.

APA, Harvard, Vancouver, ISO, and other styles

5

Campos, Antonio Luiz P. S., Thiago Dantas da Silva, and Francisco Sales de Lima Filho. "SISTEMA DE SIMULAÇÃO DE PRESENÇA RESIDENCIAL." HOLOS 1 (April 20, 2010): 130. http://dx.doi.org/10.15628/holos.2010.308.

Full text

Abstract:

Neste artigo é detalhado um sistema eletrônico de baixo custo para ser empregado em automação residencial, visando a simulação de presença residencial. Para isso, foram empregadas técnicas de comunicação com portadora em linhas de potência (Power Line Carrier Communications – PLCC), que oferecem métodos de instalação de redes domésticas de automação economicamente viáveis, em qualquer residência. Este projeto deu continuidade a diversas pesquisas desenvolvidas pelo Prof. Antonio Campos, que seguem a mesma linha dessa proposta. O sistema é um dispositivo de acionamento de cargas remoto controlado por um programa computacional, que faz a interface homem-máquina com o usuário.

APA, Harvard, Vancouver, ISO, and other styles

6

"Automation focused on Power line Communications and the Internet of Things." International Journal of Innovative Technology and Exploring Engineering 9, no. 7 (2020): 1255–59. http://dx.doi.org/10.35940/ijitee.g5902.059720.

Full text

Abstract:

Power line carrier is available in every home for power supply. However instead of inserting optical fibre and ethernet for communication medium, the power line carrier can be utilized. The aim of this study is to implement the low-cost home automation by integrating the GSM/GPRS modem and PLCC modem. With the assistance of these two modems, the home automation can be implemented from any location. Blynk application is been implemented in this study for controlling the home appliance like fan, bulb and AC

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Powe Line Carrier Communication (PLCC)"

1

Franzin, Renato Pivesso. "Estudo da técnica FBMC aplicada em Power line communication." Universidade Presbiteriana Mackenzie, 2017. http://tede.mackenzie.br/jspui/handle/tede/3443.

Full text

Abstract:

Submitted by Marta Toyoda (1144061@mackenzie.br) on 2018-02-08T19:53:42Z No. of bitstreams: 2 RENATO PIVESSO FRANZIN.pdf: 4022365 bytes, checksum: 9a9f1f649dcaff054b2cc033a7c69dba (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)<br>Approved for entry into archive by Paola Damato (repositorio@mackenzie.br) on 2018-02-22T13:30:38Z (GMT) No. of bitstreams: 2 RENATO PIVESSO FRANZIN.pdf: 4022365 bytes, checksum: 9a9f1f649dcaff054b2cc033a7c69dba (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)<br>Made available in DSpace on 2018-02-22T13:30:38Z (GMT). No. of bitstreams: 2 RENATO PIVESSO FRANZIN.pdf: 4022365 bytes, checksum: 9a9f1f649dcaff054b2cc033a7c69dba (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Previous issue date: 2017-10-27<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior<br>The present dissertation presented a comparative analysis between OFDM and FBMC modulation techniques, applied in Power Line Communication (PLC) technology, considering realistic channel models. With the growing demand for access to broadband data networks, there is a need to integrate the various data communication technologies. In this scenario, PLC networks can o er a viable alternative as a provider of network access, since they use the infrastructure of the transmission lines. However, the electrical network is a hostile medium for data transmission, presenting impedance mismatches, noise interference and signal propagation in multipath, characterizing the PLC channel model. With the objective of increasing the data transmission rate, as well as to obtain a better utilization of available bandwidth, the present work proposed to replace the OFDM technique by FBMC in PLC networks. For this, a study of the channel model was carried out to obtain the necessary parameters for the computational simulations through Matlab software. The OFDM and FBMC techniques were implemented according to IEEE 1901 standard technical speci cations. With the results obtained in the simulations, it was veri ed that the FBMC is more robust the channel interferences, presenting gains of up to 8 dB in the bit error rate, and an increase in the data transmission rate and spectral e ciency of up to 25% in relation to OFDM. Therefore, the FBMC technique can be implemented at the physical layer of the IEEE 1901 standard, replacing OFDM.<br>A presente dissertação apresentou uma análise comparativa entre as t_ecnicas de modulação OFDM e FBMC, aplicadas na tecnologia Power Line Communication (PLC), considerando modelos realísticos de canais. Com a crescente demanda ao acesso das redes de dados em banda larga, há uma necessidade de integração das diversas tecnologias de comunicação de dados. Nesse cenário, as redes PLC podem oferecer uma alternativa viável como provedora de acesso à rede, pois utilizam a infraestrutura das linhas de transmissão de energia elétrica. Entretanto, a rede elétrica é um meio hostil para transmissão de dados, apresentando desajustes de impedância, interferência de ruído e propagação do sinal em multipercursos, caracterizando o modelo do canal PLC. Com o objetivo de aumentar a taxa de transmissão de dados, como também obter um melhor aproveitamento da largura de banda disponível, o presente trabalho propôs substituir a técnica OFDM pela FBMC em redes PLC. Para isso, foi realizado um estudo do modelo do canal, para obter os parâmetros necessários para as simulações computacionais por meio do software Matlab. As técnicas OFDM e FBMC foram implementadas de acordo com especificações técnicas do padrão IEEE 1901. Com os resultados obtidos nas simulações, constatou que o FBMC é mais robusto as interferências do canal, apresentando ganhos de até 8 dB na taxa de erro de bit, e um incremento na taxa de transmissão de dados e eficiência espectral de até 25% em relação ao OFDM. Portanto, a técnica FBMC pode ser implementada na camada física do padrão IEEE 1901, substituindo o OFDM.

APA, Harvard, Vancouver, ISO, and other styles

2

Novák, Pavel. "Úzkopásmový PLC modem." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242170.

Full text

Abstract:

The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.

APA, Harvard, Vancouver, ISO, and other styles

3

Skala, Milan. "Měřič elektrické energie s podporou automatického dálkového sběru." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220211.

Full text

Abstract:

This master’s thesis deals with design and implementation of electric energy meter with support of automatic remote data collection. For the collecting of measured data is used narrowband PLC technology. The theoretical part describes the basic properties and standards of narrowband PLC technology, such as types of coupling circuits, modulations, frequency bands and interference problems. In the practical part, there is description of selected parts, such as control circuit power meter, modem, microcontroller and UART to USB converter. There are further described basic properties of narrowband PLC modem ST7570 by STMicroelectronics. The final chapter, implementation of the device, deals with designs of circuit PLC modem ST7570, power meter ADE7753 and converter USB to UART CP2102.

APA, Harvard, Vancouver, ISO, and other styles

4

Yogesh, S. "Power Line For Data Communication : Characterisation And Simulation." Thesis, 1995. http://etd.iisc.ernet.in/handle/2005/2188.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Powe Line Carrier Communication (PLCC)"

1

Mandava, Srihari, Abhishek Gudipalli, and G. Vidhya Sagar. "Spectral Analysis and Comparison of Single-Carrier PLC Modules in Narrowband Power Line Communication System." In Advances in Systems, Control and Automation. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4762-6_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wu, Yan, Weiqing Tao, Yingjie Zhang, and Xueting Li. "Mixed Communication Design of Phasor Data Concentrator in Distribution Network." In Proceeding of 2021 International Conference on Wireless Communications, Networking and Applications. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2456-9_10.

Full text

Abstract:

AbstractPhase Data Concentrator (PDC) is an important part of Wide Area Measurement System (WAMS) and is widely used in transmission systems. WAMS technology will also be applied in smart distribution network, which has many nodes, complex architecture and various types of data transmission services, and a single communication mode cannot meet its needs. In order to solve this problem, this paper first introduces the composition of WAMS system, communication network mode, and discusses the access layer communication network mode. According to the main station, sub-station interaction process design a synchronous phase data set device that can carry out up-down communication and mix network by various means of communication. Finally, the experimental environment of Power Line Carrier (PLC) and twisted pair network communication is set up to verify.

APA, Harvard, Vancouver, ISO, and other styles

3

Tiru, Banty. "Exploiting Power Line for Communication Purpose." In Advances in Systems Analysis, Software Engineering, and High Performance Computing. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-8493-5.ch014.

Full text

Abstract:

Power Line Communication (PLC) uses the available power line as a communication medium. The purpose of this chapter is to present the salient features, current trend and future scope of PLC with emphasis in the Indian context. Unlike other channels available, power lines are harsh media for data transfer and require efficient modeling and simulation techniques to propose and implement suitable mitigation schemes for achieving acceptable performance. Designed equipments have to adhere to strict mandates at the national and international levels to account for issues related to electromagnetic compatibility (EMC). In spite of this, PLC is expected to occupy an important place in the networking market in applications of smart grid and as a component of heterogeneous/hybrid communication system. The chapter is also backed by results from experiments carried on a typical power line in a test site with a presentation of noise, transfer characteristics, modeling and an estimate of the channel capacity.

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Powe Line Carrier Communication (PLCC)"

1

Ahmed, M., and W. L. Soo. "Power line carrier (PLC) based communication system for distribution automation system." In 2008 IEEE 2nd International Power and Energy Conference (PECon). IEEE, 2008. http://dx.doi.org/10.1109/pecon.2008.4762742.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bueche, David, Patrick Corlay, Francois-Xavier Coudoux, Marc Gazalet, and Christophe Deknudt. "Analysis of optimal power distribution over pilot tones for multi-carrier communications over PLC." In 2011 IEEE International Symposium on Power Line Communications and Its Applications (ISPLC). IEEE, 2011. http://dx.doi.org/10.1109/isplc.2011.5764403.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

de Campos, Fabricio P. V., Renato Machado, Moises V. Ribeiro, and Marcello L. R. de Campos. "MISO single-carrier system with feedback channel information for narrowband PLC applications." In 2009 IEEE International Symposium on Power Line Communications and Its Applications. IEEE, 2009. http://dx.doi.org/10.1109/isplc.2009.4913447.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Rabie, Khaled M., and Emad Alsusa. "Single-carrier FDMA with blanking/clipping for mitigating impulsive noise over PLC channels." In 2014 International Symposium on Power Line Communications and its Applications (ISPLC). IEEE, 2014. http://dx.doi.org/10.1109/isplc.2014.6812367.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Crussiere, M., J. Y. Baudais, and J. F. Helard. "Robust and high-bit rate communications over PLC channels: a bit-loading multi-carrier spread-spectrum solution." In International Symposium on Power Line Communications and Its Applications, 2005. IEEE, 2005. http://dx.doi.org/10.1109/isplc.2005.1430461.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rao, Rakesh, Srinivas Akella, and Gokhan Guley. "Power line carrier (PLC) signal analysis of smart meters for outlier detection." In 2011 IEEE Second International Conference on Smart Grid Communications (SmartGridComm). IEEE, 2011. http://dx.doi.org/10.1109/smartgridcomm.2011.6102335.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Abraham, Charles. "The Use of Power Line Carrier (PLC) Communication System for Video and Data Distribution on Trucks, Trailers and Buses." In International Truck & Bus Meeting & Exposition. SAE International, 1997. http://dx.doi.org/10.4271/973174.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!