Relevant bibliographies by topics / Power electronic control

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Power electronic control'

Author: Grafiati
Published: 19 February 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Power electronic control.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Power electronic control"

1

Tedeschi, Elisabetta, Paolo Tenti, Paolo Mattavelli, and Daniela Trombetti. "Cooperative Control Of Electronic Power Processors In Micro-grids." Eletrônica de Potência 14, no. 4 (November 1, 2009): 241–49. http://dx.doi.org/10.18618/rep.2009.4.241249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dote, Y., and R. G. Halt. "Intelligent control, power electronic systems." IEEE Power Engineering Review 19, no. 9 (September 1999): 44. http://dx.doi.org/10.1109/mper.1999.785805.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Habetler, T. G., and R. G. Harley. "Power electronic converter and system control." Proceedings of the IEEE 89, no. 6 (June 2001): 913–25. http://dx.doi.org/10.1109/5.931488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Van Wyk, J. D. "Power electronic converters for motion control." Proceedings of the IEEE 82, no. 8 (1994): 1164–93. http://dx.doi.org/10.1109/5.301683.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zinovchenko, A. N., V. Ya Prituzhalov, and S. V. Maslakov. "Electronic device for power consumption control." Measurement Techniques 31, no. 9 (September 1988): 917–19. http://dx.doi.org/10.1007/bf00863899.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vosters, Gregory M., and Wayne W. Weaver. "Energy Space Modeling of Power Electronics in Local Area Power Networks." Advances in Power Electronics 2012 (September 13, 2012): 1–10. http://dx.doi.org/10.1155/2012/837602.

Full text
Abstract:
Power electronics are a core enabling technology for local area power networks and microgrids for renewable energy, telecom, data centers, and many other applications. Unfortunately, the modeling, simulation, and control of power electronics in these systems are complicated when using traditional converter models in conjunction with the network nodal equations. This work proposes a change of variables for the power electronic converter models from traditional voltage and currents to input conductance and stored energy. From this change of state, a universal point of load converter model can be utilized in the network nodal equations irrespective of the topology of the converter. The only impact the original converter topology has on the new model is the bounds on the control and state variables, and the mapping back to the switching or duty cycle controls. The proposed approach greatly simplifies the modeling of local area power networks and microgrids. This simpler model can be used to study stability and energy utilization and develop high-level control strategies that were not previously feasible.
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Hui, Yifan Li, Shaofeng Huang, and Huigen Li. "Novel power electronic device for power angle stability control." Journal of Engineering 2022, no. 4 (January 11, 2022): 447–51. http://dx.doi.org/10.1049/tje2.12125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Frivaldsky, Michal. "Advanced Perspectives for Modeling Simulation and Control of Power Electronic Systems." Energies 14, no. 23 (December 3, 2021): 8108. http://dx.doi.org/10.3390/en14238108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Roy, V., and V. Grinina. "Stable power supply for electronic control and control systems." Lighting Engineering & Power Engineering 3, no. 53 (2018): 87–90. http://dx.doi.org/10.33042/2079-424x-2018-3-53-87-90.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rodrigues, Eduardo M. G., Radu Godina, and Edris Pouresmaeil. "Industrial Applications of Power Electronics." Electronics 9, no. 9 (September 19, 2020): 1534. http://dx.doi.org/10.3390/electronics9091534.

Full text
Abstract:
Electronic applications use a wide variety of materials, knowledge, and devices, which pave the road to creative design, development, and the creation of countless electronic circuits with the purpose of incorporating them in electronic products. Therefore, power electronics have been fully introduced in industry, in applications such as power supplies, converters, inverters, battery chargers, temperature control, variable speed motors, by studying the effects and the adaptation of electronic power systems to industrial processes. Recently, the role of power electronics has been gaining special significance regarding energy conservation and environmental control. The reality is that the demand for electrical energy grows in a directly proportional manner with the improvement in quality of life. Consequently, the design, development, and optimization of power electronics and controller devices are essential to face forthcoming challenges. In this Special Issue, 19 selected and peer-reviewed papers discussing a wide range of topics contribute to addressing a wide variety of themes, such as motor drives, AC-DC and DC-DC converters, electromagnetic compatibility and multilevel converters.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Power electronic control"

1

Pan, Fei. "Multifrequency Averaging in Power Electronic Systems." UKnowledge, 2014. http://uknowledge.uky.edu/ece_etds/62.

Full text
Abstract:
Power electronic systems have been widely used in the electrical power processing for applications with power levels ranging from less than one watt in battery-operated portable devices to more than megawatts in the converters, inverters and rectifiers of the utility power systems. These systems typically involve the passive elements such as inductors, capacitors, and resistors, the switching electronic components such as IGBTs, MOSFETS, and diodes, and other electronic circuits. Multifrequency averaging is one of the widely used modeling and simulation techniques today for the analysis and design of power electronic systems. This technique is capable of providing the average behavior as well as the ripple behavior of power electronic systems. This work begins with the extension of multifrequency averaging to represent uniformly sampled PWM converters. A new multifrequency averaging method of solving an observed issue with model stability is proposed and validated. Multifrequency averaging can also be applied to study the instability phenomenon in power electronic systems. In particular, a reduced-order multifrequency averaging method, along with a genetic algorithm based procedure, is proposed in this work to estimate the regions of attraction of power electronic converters. The performance of this method is shown by comparing the accuracy and efficiency with the existing methods. Finally, a new continuous-time multifrequency averaging method of representing discrete-time systems is proposed. The proposed method is applied to model digitally controlled PWM converters. Simulation and hardware results show that the proposed method is capable of predicting the average behavior as well as the ripple behavior of the closed-loop systems. Future research in the area of multifrequency averaging is proposed.
APA, Harvard, Vancouver, ISO, and other styles
2

Kulworawanichpong, Thanatchai. "Optimising AC electric railway power flows with power electronic control." Thesis, University of Birmingham, 2004. http://etheses.bham.ac.uk//id/eprint/4/.

Full text
Abstract:
The latest generation of AC-fed traction drives, employing high-speed switching devices, is able to control the reactive power drawn from the overhead line by each equipment. If the conditions at each locomotive or train could be fed back to a central control point, it is possible for a centrally located controller to calculate optimal values for the reactive power in each drive and to send those commands back to the individual equipment. In this thesis, AC railway power flows are optimised in real time and the results are used to achieve some particular system objective via control of the PWM equipment as mobile reactive power compensators. The system voltage profile and the total power losses can be improved while the overall power factor at the feeder substation is also made nearer to unity. For off-line simulation purposes, high execution speeds and low storage requirements are not generally significant with the latest computer hardware. However, this real-time control employs on-line optimising controllers, which need embedded power solvers running many times faster than real time. Thus, a fast and efficient algorithm for AC railway power flow calculation was developed. The proposed scheme is compared to a conventional reactive power compensation, e.g. SVC, and found to be less expensive to implement. Several test cases for AC electric railway systems are examined. The centralised area control system leads to the best improvement where an existing fleet of diode or thyristor phase-angle controlled locomotives is partially replaced with PWM ones, compared to that obtained without compensation or to classical track-side Var compensation methods. From these results, the potential for PWM locomotives to improve overall system performance is confirmed.
APA, Harvard, Vancouver, ISO, and other styles
3

Luo, Xiaozhong. "Direct power control of AC motors." abstract and full text PDF (UNR users only), 2009. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1472963.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Oukati, Sadegh Mahmoud. "Control of power electronic devices (FACTS) to enhance power system stability." Thesis, University of Strathclyde, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.275177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hoff, Erik Stjernholm. "Distributed Generation - Power Electronic Converters, Communication and Control." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Information Technology, Mathematics and Electrical Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1620.

Full text
Abstract:

This thesis tries to explain the changes in the control of power electronic converters that are possible by the use of communication. Many of the renewable energy sources such as photovoltaic panels are geographically dispersed. The power rating per generator is therefore typically low. If this kind of energy source should dominate an electrical grid, the number of generators must be high. There should also be means of controlling this large number of generators simultaneously and safely. The cost of safe communication may be too high compared to the power contribution of a single generator. The Internet offers a low-cost solution, but it cannot guarantee real-time properties. Similarly to the Internet itself, it is shown how communication errors can be detected and handled in a safe manner by the end-system, in this case the generator. The generator can detect a communication timeout, and change control algorithms in order to guard itself and the connected electricity grid. When necessary, it can also disconnect and work as a local standalone power supply. In order to be able to supply all kinds of loads, the generator (in this case an inverter) is primarily voltage controlled. This results in challenges concerning current distortion. The use of feed-forward for cancellation of common grid voltage harmonics is discussed, simulated and measured. An anti-islanding algorithm for voltage controlled inverters is also developed, simulated and measured in this thesis. A DC/DC-converter for optimized connection of a photovoltaic panel is built, exploiting the photovoltaic panel properties to reduce the size and the losses significantly. Although most contributions are connected to details and parts of the system, the interactions between communication and control are emphasized.

APA, Harvard, Vancouver, ISO, and other styles
6

Bendre, Vijay. "Power Electronic Control of a Partial Core Transformer." Thesis, University of Canterbury. Electrical and Computer Engineering, 2010. http://hdl.handle.net/10092/4927.

Full text
Abstract:
The research programme at the University of Canterbury includes the development and applications of partial core inductors and transformers for high voltage testing of generator insulation. Unlike a conventional full core transformer, a partial core transformer has no limbs and yokes. A partial core transformer is a compromise between a full core and coreless transformer. It is superior to its full core counterpart as far as cost, weight and ease of transportation are concerned. Partial core transformers have a low magnetising reactance and hence draw a high magnetising current. This characteristic makes them a perfect fit in applications where the load is capacitive in nature, such as a.c. power frequency high voltage testing of generator insulation and cable testing etc. The work carried out for this thesis focuses on automatically controlling the amount of reactive power on the supply side of a partial core transformer. The considered design includes a third winding around the existing two windings. A power electronic controller is connected to the third winding, which modifies the VAr absorption characteristics of the magnetically coupled supply winding. Two options are considered to achieve continuous reactive power control in the partial core transformer as explained below. First, a thyristor controlled reactor (TCR) is proposed as the VAr controller. It is modelled using PSCAD/EMTDC software. Simulations reveal the design criteria, overall performance and the limitations of the suggested proposal. The TCR connected tertiary winding takes the capacitive burden of the supply. The model demonstrates the ability of the automatically controlled TCR to provide a continuous variation of reactive power without significant under or over compensation. This feature limits the supply current to its real component only, so the supply provides only the losses of the system. Second, a voltage source converter is considered as the VAr controller. This is modelled in PSCAD/EMTDC and a hardware prototype is designed and built. Based on the analysis, the control algorithm (including a digital PI controller) is implemented using an 8 bit micro-controller, PIC18LF4680. The prototype is tested in the laboratory for both active and inductive load conditions as seen from the supply side. Performance of the hardware prototype is discussed in detail. The PSCAD/EMTDC model and the hardware prototype successfully demonstrate the feasibility of a STATCOM controlled partial core transformer. The proposed system is capable of compensating a wide range of capacitive loads as compared with its TCR counterpart. It is proved that the system is very robust and remains dynamically stable for a large system disturbance such as change in load from full capacitive to inductive and vice versa. This confirms that the system is capable of providing continuous VAr control.
APA, Harvard, Vancouver, ISO, and other styles
7

Ravindran, Vinoth Kumar. "Reactive power control functions for distributed PV sources." Thesis, Wichita State University, 2013. http://hdl.handle.net/10057/6835.

Full text
Abstract:
The integration of distributed generation is one of the biggest changes facing the power industry, with greenhouse gas mitigation and the smart grid initiative. With result of the increasing penetration of grid-connected distributed generators, such as solar photovoltaic (PV) sources the system voltage regulation becomes challenging. Specifically, capacitor banks and step voltage regulators that normally boost voltage slightly may push utilization voltages either above or below the adopted ANSI voltage limits because of the variable nature of PV sources. This can adversely affect the expected reliability requirements for the utility and also decrease the life span of voltage-regulating equipment due to excessive operations. This thesis work studies the effects of large-scale penetration of distributed PV sources using several IEEE radial distribution test feeders. Based on the simulation results, tap-changer excessive operations, voltage fluctuations, and voltage rise in the feeders are identified, and the additional capacity of reactive power control of inverters to minimize the voltage fluctuations is analyzed. With the presence of a communication infrastructure, it is expected that distributed generators could be more efficiently operated, especially the inverters, which will be able to perform several grid support functions including voltage regulation and reactive power support. Therefore, this work also focuses on developing a power loss minimization technique while utilizing the additional benefits of dispatchable reactive power from a cluster of distributed resources. The proposed technique is tested using IEEE 13- and 34-node test feeders, and the results show that the proposed technique will minimize the real power loss in the radial distribution feeders.
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Electrical Engineering and Computer Science
APA, Harvard, Vancouver, ISO, and other styles
8

Rasouli, Disfani Vahid. "Optimization and Control for Microgrid and Power Electronic Converters." Scholar Commons, 2015. http://scholarcommons.usf.edu/etd/5764.

Full text
Abstract:
The proposed dissertation research investigates Optimization and Control for Microgrid and Power Electronic Converters. The research has two major parts: i- Microgrid Operation and Control, ii- Power Electronic Converter Control and Optimization. In the first part, three focuses are investigated. First, a completely distributed algorithm is developed for dc optimal power flow problem for power distribution systems as one of the necessary functions considered in unit-commitment problem in day-ahead markets. This method is derived based upon the partial primal-dual representation of the economic dispatch problem, which is finally translated to DC-OPF problem. Second, the optimal interaction between the utility and communities will be studied, due to its improtance in real-time markets. The objective of this section will be to develop an iterative agent-based algorithm for optimal utility-community control. The algorithm will consider the AC power system constraints to maintain power system stability. In this algorithm, a simplified model of microgrid is considered. In the third focus, a comprehensive model of microgrid is taken into account. The optimal operation of the microgrid considering energy storage systems and renewable energy resources is investigated. The interaction of such microgrids with the main grid to define the optimal operation of the entire embedded system is studied through two iterative methods. In the microgrid's internal problem, a moving-horizon algorithm is considered to define the optimal dispatch of all distributed energy resources while considering the time-correlated constraints of energy storage systems. A thorough analysis of the effects of the size of storage systems on energy and reserve market parameters are also performed. In the second part, the focus of research is to develop optimal control strategies for Power Electronic Converters. A Model Predictive Control (MPC) switching method is proposed for Modular Multilevel Converters (MMC). The optimal solution of MPC problem is then represented as an optimization problem. Due to lack of efficient algorithms to seek the optimal solution, a fast algorithm will be proposed in this research. The method proposed reduces the number of possible solutions and computation efforts dramatically.
APA, Harvard, Vancouver, ISO, and other styles
9

Ming, Wen-Long. "Active control of voltage ripples in power electronic converters." Thesis, University of Sheffield, 2016. http://etheses.whiterose.ac.uk/12343/.

Full text
Abstract:
Two major challenges, i.e., bulky electrolytic capacitors and isolation transformers, remain as critical obstacles for further improvement on reliability, power density and efficiency of power electronic converters, which are mainly used to reduce low-frequency voltage ripples and high-frequency common-mode voltage ripples, respectively. In order to overcome the two challenges, the most straightforward way is to simply combine existing solutions developed for each of them. However, this would considerably increase system complexity and cost, which should be avoided if possible. In this thesis, these two challenges are innovatively addressed in a holistic way by using active control techniques. This thesis first focuses on the reduction of low-frequency voltage ripples in conventional half-bridge converters, after adding an actively-controlled neutral leg. As a direct application of this strategy, a single-phase to three-phase conversion is then proposed. After that, a ρ-converter with only four switches is proposed to significantly reduce both low-frequency ripples and high-frequency common-mode ripples in a holistic way. It is found that the total capacitance can be reduced by more than 70 times compared to that in conventional full-bridge converters. As a result, there is no longer a need to use bulky electrolytic capacitors and isolation transformers. Then, the ρ-converter equipped with the synchronverter technology is operated as an inverter for PV applications. Another converter is also proposed for the same purpose but with reduced voltage stress. In order to further reduce the total capacitance and to reduce the neutral inductor in the ρ-converter, a new type of converter, called the θ-converter, is proposed. Finally, two actively-controlled ripple eliminators are proposed to reduce low-frequency ripples in general DC systems while the aforementioned research is focused on some specific topologies. Extensive experimental results are presented to validate most of the developed systems while the rest are validated with simulation results.
APA, Harvard, Vancouver, ISO, and other styles
10

Radi, Mohammed A. M. "Power electronics considerations for voltage regulation and VAR control approaches in LV distribution networks-hybrid power electronic modules." Thesis, Brunel University, 2016. http://bura.brunel.ac.uk/handle/2438/14697.

Full text
Abstract:
The future substation depends on finding a way to mitigate the effects of the drawbacks of the conventional legacy by employing the efficiency of the solid state switches in light of changing the loading features by time such as Electrical Vehicles (EV) and Photo-voltaic (PV) cells. In distribution transformers the ratio between the primary voltage and the secondary voltage cannot be changed, and the use of the on-load taps changers are limited. Poor voltage regulation and reactive power transmission is a direct reason for losses and shortening the life of several devices. This research discusses the considerations of applying Power Electronics (PE) approaches and designs that provide additional functions in regulating the voltage and controlling the reactive power that is injected in the distribution network, using embedded fractional rated converters attached partially with the windings of the LV transformer. These approaches studies the possible considerations that have the potentials to enhance the unit with more flexibility in controlling the voltage and reactive power at the last mile of the network, in order to decrease the losses and meet the future expectations for low voltage networks modifications, and that by using a Power Electronic (PE) approach has less losses and more functionality depending on the reliability of transformer and intelligence of PE solutions. The approach of a hybrid distribution transformer is introduced and its functionality in regulating the voltage and injecting reactive power is illustrated. A back-to-back converter is controlled according to the immediate need for voltage control and reactive power in Low Voltage (LV) networks, and for the purpose of controlling three unbalanced phases using two control strategies; resonant controller and vector control. The overall controller adds or decreases voltage (10%-20%) to/from the total output voltage in order to control the whole output voltage of the transformer. In addition, some loads need high amount of reactive power at last mile of the network, therefore the consideration of using switched capacitors technique is introduced to serve at the end user side whereby its ability to provide automatic variable reactive power compensation in a closed loop system is illustrated. The considerations results indicate significant potentials for deploying PE in the last mile of the network by using innovative designs and suitable control functions with less losses and costs.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Power electronic control"

1

Gottlieb, Irving M. Electronic power control. New York: Glencoe, Macmillan/McGraw-Hill, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gottlieb, Irving M. Electronic power control. Blue Ridge Summit, PA: Tab Books, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Marston, R. M. Power control circuits manual. 2nd ed. Oxford, [England]: Newnes, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gottlieb, Irving M. Practical power-control techniques. Indianapolis, IN, USA: H.W. Sams, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

N, Hulley L., ed. Power electronics and motor control. Cambridge [Cambridgeshire]: Cambridge University Press, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

N, Hulley L., and Liang D. T. W, eds. Power electronics and motor control. 2nd ed. Cambridge: Cambridge University Press, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dote, Yasuhiko. Intelligent control: Power electronic systems. Oxford [England]: Oxford University Press, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

G, Turnbull F., ed. Power electronic control of AC motors. Oxford: Pergamon, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Murphy, J. M. D. Power electronic control of AC motors. Oxford [Oxfordshire]: Pergamon, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bacha, Seddik, Iulian Munteanu, and Antoneta Iuliana Bratcu. Power Electronic Converters Modeling and Control. London: Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-5478-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Power electronic control"

1

Gateau, Guillaume, and Thierry Meynard. "Current Control Strategies for Multicell Converters." In Power Electronic Converters, 487–536. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621196.ch16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Naouar, Mohamed Wissem, Eric Monmasson, Ilhem Slama-Belkhodja, and Ahmad Ammar Naassani. "PI Current Control of a Synchronous Motor." In Power Electronic Converters, 287–318. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621196.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Naouar, Mohamed Wissem, Eric Monmasson, Ilhem Slama-Belkhodja, and Ahmad Ammar Naassani. "Predictive Current Control for a Synchronous Motor." In Power Electronic Converters, 319–34. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621196.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Le Claire, Jean-Claude. "Current Control Using Self-oscillating Current Controllers." In Power Electronic Converters, 417–48. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621196.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Naassani, Ahmad Ammar, Mohamed Wissem Naouar, Eric Monmasson, and Ilhem Slama-Belkhodja. "Sliding Mode Current Control for a Synchronous Motor." In Power Electronic Converters, 335–70. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621196.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pierquin, Joseph, Arnaud Davigny, and Benoît Robyns. "Current and Voltage Control Strategies Using Resonant Correctors." In Power Electronic Converters, 449–86. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621196.ch15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Small, James E. "PCB Smoke and Fire Damage for Power Levels Below 5 Watts." In Electronic Control Fires, 39–40. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-52845-8_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jadeja, Rajendrasinh, Amit Ved, Tapankumar Trivedi, and Gagandipsinh Khanduja. "Control of Power Electronic Converters in AC Microgrid." In Power Systems, 329–55. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23723-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Arrillaga, J., and N. R. Watson. "Load Flow under Power Electronic Control." In Computer Modelling of Electrical Power Systems, 129–59. West Sussex, England: John Wiley & Sons, Ltd, 2013. http://dx.doi.org/10.1002/9781118878286.ch5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Arrillaga, J., and N. R. Watson. "System Stability under Power Electronic Control." In Computer Modelling of Electrical Power Systems, 297–343. West Sussex, England: John Wiley & Sons, Ltd, 2013. http://dx.doi.org/10.1002/9781118878286.ch8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Power electronic control"

1

Ginn III, H. L., J. D. Bakos, Fred Flinstone, and A. Benigni. "Fast Coordination of Power Electronic Converters for Energy Routing in Shipboard Power Systems." In International Ship Control Systems Symposium. IMarEST, 2018. http://dx.doi.org/10.24868/issn.2631-8741.2018.024.

Full text
Abstract:
A long-term goal of future naval shipboard power systems is the ability to manage energy flow with sufficient flexibility to accommodate future platform requirements such as, better survivability, continuity, and support of pulsed and other demanding loads. To attain this vision of shipboard energy management, shipboard power and energy management systems must coordinate operation of all major components in real-time. The primary components of a shipboard power system are the generators, energy storage modules, and increasingly power electronics that interface those sources and main load centers to the system. Flexible management of energy flow throughout shipboard distribution systems can be realized by automated coordination of multiple power electronic converters along with storage and generation systems. Use of power converters in power distribution systems has continuously increased due to continued development of the power electronics building blocks (PEBB) concept which reduces cost and increasing reliability of converters. Recent developments in SiC power devices are yielding PEBBs with far greater switching frequencies than Si based devices resulting in an order of magnitude reduction of the time scales as compared to converter systems utilizing conventional IGBT based PEBBs. In addition there have also been advancements in highly modularized converter systems with hundreds of PEBBs such as the Modular Multilevel Converter. Both of those trends have resulted in the continued evolution of the Universal Controller Architecture which attempts to standardize control interfaces for modular power electronic systems. Further development of interface definitions and increasing communication and computational capabilities of new FPGA based controllers provides opportunities beyond simply supporting SiC PEBBs. Fast control coordination across the system using an appropriate communication architecture provides a degree of energy management not previously realizable in shipboard power systems. The paper will present recent research results in networked control architectures for power electronic converter coordination and control. It will demonstrate that current FPGA and gigabit speed serial communication technologies allow for a very high degree of energy flow control.
APA, Harvard, Vancouver, ISO, and other styles
2

Potter, Fred, Michael Ballas, and Tom Supples. "“Smart Panel” Electronic Circuit Breaker Control Technology." In Power Systems Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2008. http://dx.doi.org/10.4271/2008-01-2880.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gaffney, Brian D. "Development of Modern Electronic Control Systems for Power Distribution." In 2002 International Joint Power Generation Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/ijpgc2002-26004.

Full text
Abstract:
The power industry is increasingly affected by several trends, which require improvements in the distributed generation and control systems of on-site power. These trends include the ability to share load across generators more effectively, seamless sequencing of generators, and the ability to monitor and control power that is being produced. Electronic control systems can provide these advantages in a cost effective solution. The application of electronic controls to a power distribution system requires a thorough development program. It is imperative to assure that the controls will provide reliable, long-term performance, as well as meeting the plant’s current and future needs for power distribution. This paper describes the development and field evaluation required to apply electronic controls to existing switchgear and power distribution systems in the power generation industry. The microprocessor based electronic control system for today’s power plants replaces out-dated analog equipment and antiquated relay logic. The new systems incorporate three main functions: Paralleling generators, monitoring power requirements, and effective sequencing of generators in power plants. Integration of these functions into the microprocessor based control system provides increased reliability, reduced cost, and enhanced performance, while concurrently providing increased flexibility in the operation of the plant. Additional benefits can be realized including reduced operator requirements, reduced training costs, and reduced burden on instrumentation electricians. A primary focus of this paper is the process used to qualify the control system needed for specific types of existing distributed power systems. This process consists of current system evaluation and categorization, establishment of classification of plant (utility, merchant plant, peak shaving facility, IPP), and determining the future needs of individual plants for power distribution. Local regulatory and utility protection and interconnect requirements must also be assessed to assure that the new control system meets or exceeds them. Methods of accurately monitoring, improving performance, and providing generator sequencing are defined, including accounting for improvements in the long-term expansion of the distributed power control and monitoring system.
APA, Harvard, Vancouver, ISO, and other styles
4

Woods, J., and S. Fitz. "Green consumer electronics: e-CLiPs, electronic control of intelligent power systems." In 2010 IEEE International Conference on Consumer Electronics (ICCE 2010). IEEE, 2010. http://dx.doi.org/10.1109/icce.2010.5418982.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tu, Chunming, Zheng Lan, Zhikang Shuai, Fan Xiao, Fei Jiang, and Cungang Hu. "Modular power electronic transformer and its direct power control." In 2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA). IEEE, 2017. http://dx.doi.org/10.1109/iciea.2017.8282959.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Power electronic converter topologies, design and control, power supplies." In 2016 IEEE International Power Electronics and Motion Control Conference (PEMC). IEEE, 2016. http://dx.doi.org/10.1109/epepemc.2016.7751966.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dujic, Drazen, Frederick Kieferndorf, Francisco Canales, and Uwe Drofenik. "Power electronic traction transformer technology." In 2012 7th International Power Electronics and Motion Control Conference (IPEMC 2012). IEEE, 2012. http://dx.doi.org/10.1109/ipemc.2012.6258820.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hingorani, Narain, Herbert Ginn, and Joseph Sullivan. "Control/protection architecture for power electronic converters." In 2010 IEEE Petroleum and Chemical Industry Technical Conference (PCIC 2010). IEEE, 2010. http://dx.doi.org/10.1109/pcic.2010.5666842.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wellnitz, Keith, and Jeff Kanner. "Power Integrated Circuits for Electronic Engine Control." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/950430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Power Electronic Converter Topologies, Design and Control." In 2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC). IEEE, 2021. http://dx.doi.org/10.1109/pemc48073.2021.9432562.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Power electronic control"

1

G. William Hannaman and C. Dan Wilkinson. Evaluating the Effects of Aging on Electronic Instrument and Control Circuit Boards and Components in Nuclear Power Plants. Office of Scientific and Technical Information (OSTI), May 2005. http://dx.doi.org/10.2172/841248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chakraborty, S., B. Kroposki, and W. Kramer. Advanced Power Electronic Interfaces for Distributed Energy Systems, Part 2: Modeling, Development, and Experimental Evaluation of Advanced Control Functions for Single-Phase Utility-Connected Inverter. Office of Scientific and Technical Information (OSTI), November 2008. http://dx.doi.org/10.2172/944500.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Boroyevich, Dushyan. Power Electronics Building Blocks, "Plug and Play", Hardware and Software Control Architectures. Fort Belvoir, VA: Defense Technical Information Center, January 2004. http://dx.doi.org/10.21236/ada419456.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shomer, Ilan, Ruth E. Stark, Victor Gaba, and James D. Batteas. Understanding the hardening syndrome of potato (Solanum tuberosum L.) tuber tissue to eliminate textural defects in fresh and fresh-peeled/cut products. United States Department of Agriculture, November 2002. http://dx.doi.org/10.32747/2002.7587238.bard.

Full text
Abstract:
The project sought to understand factors and mechanisms involved in the hardening of potato tubers. This syndrome inhibits heat softening due to intercellular adhesion (ICA) strengthening, compromising the marketing of industrially processed potatoes, particularly fresh peeled-cut or frozen tubers. However, ICA strengthening occurs under conditions which are inconsistent with the current ideas that relate it to Ca-pectate following pectin methyl esterase (PME) activity or to formation of rhamnogalacturonan (RG)-II-borate. First, it was necessary to induce strengthening of the middle lamellar complex (MLX) and the ICA as a stress response in some plant parenchyma. As normally this syndrome does not occur uniformly enough to study it, we devised an efficient model in which ICA-strengthening is induced consistently under simulated stress by short-chain, linear, mono-carboxylic acid molecules (OAM), at 65 oC [appendix 1 (Shomer&Kaaber, 2006)]. This rapid strengthening was insufficient for allowing the involved agents assembly to be identifiable; but it enabled us to develop an efficient in vitro system on potato tuber parenchyma slices at 25 ºC for 7 days, whereas unified stress was reliably simulated by OAMs in all the tissue cells. Such consistent ICA-strengthening in vitro was found to be induced according to the unique physicochemical features of each OAM as related to its lipophilicity (Ko/w), pKa, protonated proportion, and carbon chain length by the following parameters: OAM dissociation constant (Kdiss), adsorption affinity constant (KA), number of adsorbed OAMs required for ICA response (cooperativity factor) and the water-induced ICA (ICAwater). Notably, ICA-strengthening is accompanied by cell sap leakage, reflecting cell membrane rupture. In vitro, stress simulation by OAMs at pH<pKa facilitated the consistent assembly of ICAstrengthening agents, which we were able to characterize for the first time at the molecular level within purified insoluble cell wall of ICA-strengthened tissue. (a) With solid-state NMR, we established the chemical structure and covalent binding to cell walls of suberin-like agents associated exclusively with ICA strengthening [appendix 3 (Yu et al., 2006)]; (b) Using proteomics, 8 isoforms of cell wall-bound patatin (a soluble vacuolar 42-kDa protein) were identified exclusively in ICA-strengthened tissue; (c) With light/electron microscopy, ultrastructural characterization, histochemistry and immunolabeling, we co-localized patatin and pectin in the primary cell wall and prominently in the MLX; (d) determination of cell wall composition (pectin, neutral sugars, Ca-pectate) yielded similar results in both controls and ICA-strengthened tissue, implicating factors other than PME activity, Ca2+ or borate ions; (e) X-ray powder diffraction experiments revealed that the cellulose crystallinity in the cell wall is masked by pectin and neutral sugars (mainly galactan), whereas heat or enzymatic pectin degradation exposed the crystalline cellulose structure. Thus, we found that exclusively in ICA-strengthened tissue, heat-resistant pectin is evident in the presence of patatin and suberinlike agents, where the cellulose crystallinity was more hidden than in fresh control tissue. Conclusions: Stress response ICA-strengthening is simulated consistently by OAMs at pH< pKa, although PME and formation of Ca-pectate and RG-II-borate are inhibited. By contrast, at pH>pKa and particularly at pH 7, ICA-strengthening is mostly inhibited, although PME activity and formation of Ca-pectate or RG-II-borate are known to be facilitated. We found that upon stress, vacuolar patatin is released with cell sap leakage, allowing the patatin to associate with the pectin in both the primary cell wall and the MLX. The stress response also includes formation of covalently bound suberin-like polyesters within the insoluble cell wall. The experiments validated the hypotheses, thus led to a novel picture of the structural and molecular alterations responsible for the textural behavior of potato tuber. These findings represent a breakthrough towards understanding of the hardening syndrome, laying the groundwork for potato-handling strategies that assure textural quality of industrially processed particularly in fresh peeled cut tubers, ready-to-prepare and frozen preserved products.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Power electronic control' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography