Log in

Relevant bibliographies by topics / Power Electronics Technology / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Power Electronics Technology.

Dissertations / Theses on the topic 'Power Electronics Technology'

Author: Grafiati

Published: 5 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Power Electronics Technology.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Al-Khalidi, Abdullah Koutaiba. "Advanced gallium nitride technology for microwave power amplifiers." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/6785/.

Full text

Abstract:

Gallium nitride (GaN) based technology has been heavily researched over the past two decades due to its ability to deliver higher powers and higher frequencies that are demanded by the market for various applications. One of GaN’s main advantages lies in its ability to form heterojunctions to wider bandgap materials such as Aluminium Gallium Nitride (AlGaN) and Aluminium Nitride (AlN). The heterostructure results in the formation of the so called 2 dimensional electron gas (2DEG), which exhibits high electron densities of up to 6E13 cm−2 and high electron mobilities of up to 2000 cm2/V·s that

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Wei Ph D. Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science. "Design & optimization of automotive power electronics utilizing FITMOS MOSFET technology." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/53317.

Full text

Abstract:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 178-179).<br>Power electronics are essential to many automotive applications, and their importance continues to grow as more vehicle functions incorporate electronic controls. MOSFETs are key elements in automotive power electronic circuits and MOSFET characteristics can strongly affect circuit size, cost and performance. Advances in MOSFET technology are thus of great importance to the advancement

APA, Harvard, Vancouver, ISO, and other styles

3

Jiang, Xingchuan. "A novel isolation technology for automotive power integrated circuit applications /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?ECED%202007%20JIANG.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sun, Jingmeng. "A wafer-thick trench isolation technology for automotive PIC applications /." View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?ECED%202009%20SUN.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lim, Hui Fern Michele. "Low Temperature Co-fired Ceramics Technology for Power Magnetics Integration." Diss., Virginia Tech, 2008. http://hdl.handle.net/10919/30156.

Full text

Abstract:

This dissertation focuses on the development of low-temperature co-fired ceramics (LTCC) technology for power converter magnetics integration. Because magnetic samples must be fabricated with thick conductors for power applications, the conventional LTCC process is modified by cutting trenches in the LTCC tapes where conductive paste is filled to produce thick conductors to adapt to this requirement. Characterization of the ceramic magnetic material is performed, and an empirical model based on the Steinmetz equation is developed to help in the estimation of losses at frequencies between 1 M

APA, Harvard, Vancouver, ISO, and other styles

6

Martin, Fregelius. "Power electronics and controller interface for a Voltage Source Converter." Thesis, Uppsala universitet, Elektricitetslära, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-322903.

Full text

Abstract:

The purpose of the thesis is to develop a system for a split-rotor drive and evaluatecontrollers and their internal components such as processors, communicationprotocols and execution speed for controlling magnetization currents in a hydropower station.The first part of the thesis builds the theory review and provides an introduction tothe most common processors and controllers available. The processors which wasevaluated were microprocessor, DSP and FPGA which have a high capacity andvariety of implementation possibilities. Two controllers, PLC and PAC whereevaluated, which contain some or se

APA, Harvard, Vancouver, ISO, and other styles

7

Todeschini, Grazia. "Wind Energy Conversion Systems based on DFIG Technology used as Active Filters: Steady-State and Transient Analysis." Digital WPI, 2010. https://digitalcommons.wpi.edu/etd-dissertations/97.

Full text

Abstract:

This thesis deals with the performance of a Wind Energy Conversion System operating as a power generator and Active Filter simultaneously. As a power generator, the Wind Energy Conversion System converts wind energy into electric energy; as an Active Filter, it sinks the harmonic currents injected by Non-Linear Loads connected at the same feeder. Three control systems are developed to ensure the described operation; a specific study regarding the compensation of the triplen harmonics is carried out; Doubly-Fed Induction Generator derating is defined; and an engineering economic analysis is per

APA, Harvard, Vancouver, ISO, and other styles

8

Tesanovic, Goran. "Performance Analysis and Implementation of Full Adder Cells Using 0.18 um CMOS Technology." Thesis, Linköping University, Department of Electrical Engineering, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2111.

Full text

Abstract:

<p>0.18 um CMOS technology is increasingly used in design and implementation of full adder cells. Hence, there is a need for better understanding of the effects of different cell designs on cell performance, including power dissipation and time delays. </p><p>This thesis contributes to better understanding of the behavior of single-bit full adder cells when low power-delay products are essential. Thirty one single-bit full adder cells have been implemented in Cadence tool suit and simulated using 0.18 µm CMOS technology to obtain a comprehensive study of the performance of the cells with respe

APA, Harvard, Vancouver, ISO, and other styles

9

Ghandi, Reza. "Fabrication Technology for Efficient High Power Silicon Carbide Bipolar Junction Transistors." Doctoral thesis, KTH, Integrerade komponenter och kretsar, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-29726.

Full text

Abstract:

The superior characteristics of Silicon Carbide as a wide band gap semiconductor have motivated many industrial and non-industrial research groups to consider SiC for the next generations of high power semiconductor devices. The SiC Bipolar Junction Transistor (BJT) is one candidate for high power applications due to its low on-state power loss and fast switching capability. However, to compete with other switching devices such as Field Effect Transistors (FETs) or IGBTs, it is necessary for a power SiC BJT to provide a high current gain to reduce the power required from the drive circuit. In

APA, Harvard, Vancouver, ISO, and other styles

10

Meegahawatte, Danushka Hansitha. "A design method for specifying power sources for hybrid power systems." Thesis, University of Birmingham, 2010. http://etheses.bham.ac.uk//id/eprint/1215/.

Full text

Abstract:

Many efforts have been made in recent years to address issues surrounding the use of fossil fuels for energy. However, it must be conceded that world’s dependence on fossil fuels cannot cease overnight. In reality, the switch is expected to be a relatively slow migration of technologies over many decades. During this transition period the world will need bridging technologies to aid in the transition to alternate energy sources. One such technology, which shows much promise in boosting energy efficiency while reducing emissions and costs, is the adoption of hybrid power systems. This thesis in

APA, Harvard, Vancouver, ISO, and other styles

11

Randoll, Richard Georg [Verfasser], Lothar [Gutachter] Frey, and Klaus-Dieter [Gutachter] Lang. "Investigations on a Packaging Technology for PCB Integrated Power Electronics / Richard Georg Randoll ; Gutachter: Lothar Frey, Klaus-Dieter Lang." Erlangen : Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), 2018. http://d-nb.info/1152438255/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Meriggi, Laura. "Antimonide-based mid-infrared light-emitting diodes for low-power optical gas sensors." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/6691/.

Full text

Abstract:

The 3-5 μm mid-infrared spectral region is of great interest as it contains the fundamental molecular fingerprints of a number of pollutants and toxic gases, which require remote real-time monitoring in a variety of applications. Consequently, the development of efficient optoelectronic devices operating in this wavelength range is a very fascinating and pertinent research. In recent years, there has been a rapid development of optical technologies for the detection of carbon dioxide (CO2), where the detected optical intensity at the specific gas absorption wavelength of 4.26 μm is a direct in

APA, Harvard, Vancouver, ISO, and other styles

13

Bengtsson, Olof. "Design and Characterization of RF-Power LDMOS Transistors." Doctoral thesis, Uppsala : University Library, Universitetsbiblioteket, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9259.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Döring, Philipp [Verfasser], and Oliver [Akademischer Betreuer] Ambacher. "Experimental evaluation of the device design and process technology of the current aperture vertical electron transistor for power electronics applications." Freiburg : Universität, 2021. http://d-nb.info/1237221366/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Li, Shengming. "The development and implementation of an advanced power electronics converter and electric machine control technology for flywheel energy storage system applications /." The Ohio State University, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486462067843111.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Ekstedt, Mathias. "Enterprise architecture for IT management : a CIO decision making perspective on the electrical power industry." Doctoral thesis, KTH, Electrical Systems, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-36.

Full text

Abstract:

<p>Within the electric power industry, the average company's enterprise system - i.e. the overall system of IT related entities - is today highly complex. Technically, large organizations posses hundreds or thousands of extensively interconnected and heterogeneous single IT systems performing tasks that varies from enterprise resource planning to real-time control and monitoring of industrial processes. Moreover are these systems storing a wide variety of sometimes redundant data, and typically they are deployed on several different platforms. IT does, however, not execute in splendid isolatio

APA, Harvard, Vancouver, ISO, and other styles

17

Muppalla, Ashwin K. "Ultra low power multi-gigabit digital CMOS modem technology for millimeter wave wireless systems." Thesis, Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/41084.

Full text

Abstract:

The objective of this research is to present a low power modem technology for a high speed millimeter wave wireless system. The first part of the research focuses on a robust ASIC design methodology. There are several aspects of the ASIC flow that require special attention such as logical synthesis, timing driven physical placement, Clock Tree Synthesis, Static Timing Analysis, estimation and reduction of power consumption and LVS and DRC closure. The latter part is dedicated to high speed baseband circuits such as Coherent and Non coherent demodulator which are critical components of a mu

APA, Harvard, Vancouver, ISO, and other styles

18

Al-Sumait, Jamal. "Solving dynamic economic dispatch problems using pattern search based methods with particular focus on the West Doha Power Station in Kuwait." Thesis, University of Southampton, 2010. https://eprints.soton.ac.uk/165503/.

Full text

Abstract:

This thesis is concerned with Dynamic Economic Dispatch (DED) problems, in particular in the context of the current and future needs of the electrical power system in the State of Kuwait. General Economic Dispatch (ED) issues are addressed, under both static and dynamic conditions, with valve-point effects accounted for. Improvements have been achieved in terms of lower fuel costs, but also more efficient and reliable simulation algorithms. The existing ED/DED models have been improved in various ways and enhanced by developing and incorporating two renewable energy sources; namely wind energy

APA, Harvard, Vancouver, ISO, and other styles

19

Qazalbash, Arfakhshand. "Rotor eddy current power losses in high speed permanent magnet synchronous generators." Thesis, University of Southampton, 2014. https://eprints.soton.ac.uk/364580/.

Full text

Abstract:

Rotor electromagnetic losses can be problematic in high speed permanent magnet synchronous machines, especially when the speed or the electrical loading are high and the slotting and winding configuration results in high magnitude asynchronous harmonics. Accurate estimation of these travelling flux harmonics in the initial design stage is essential, as small errors can result in significant errors in the estimated rotor losses, which could lead to misinformed design decisions. This Thesis makes a number of contributions to the subject of rotor losses in PM machines. It firstly investigates the

APA, Harvard, Vancouver, ISO, and other styles

20

Säll, Erik. "Design of a Low Power, High Performance Track-and-Hold Circuit in a 0.18µm CMOS Technology." Thesis, Linköping University, Department of Electrical Engineering, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1353.

Full text

Abstract:

<p>This master thesis describes the design of a track-and-hold (T&H) circuit with 10bit resolution, 80MS/s and 30MHz bandwidth. It is designed in a 0.18µm CMOS process with a supply voltage of 1.8 Volt. The circuit is supposed to work together with a 10bit pipelined analog to digital converter. </p><p>A switched capacitor topology is used for the T&H circuit and the amplifier is a folded cascode OTA with regulated cascode. The switches used are of transmission gate type. </p><p>The thesis presents the design decisions, design phase and the theory needed to understand the design decisions and t

APA, Harvard, Vancouver, ISO, and other styles

21

Thrimawithana, Duleepa J. "A novel electric fence energizer : design and analysis." Thesis, University of Auckland, 2008. http://hdl.handle.net/2292/4264.

Full text

Abstract:

Continual advancements in technology have led to the development of reliable, efficient and economical farm management systems, many of which utilize electric fences for effective control of farm animals. An electric fence system constitutes a conducting fence structure that is energized by a high voltage signal generated from an electric fence energizer. Modern electric fence energizers employ a pulsed power supply together with an appropriate high voltage charging scheme to generate high voltage pulses that energize the fence structure. The high voltage pulse delivers a non-lethal elec

APA, Harvard, Vancouver, ISO, and other styles

22

Choi, Jae Young. "Modeling and simulation for signal and power integrity of electronic packages." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45885.

Full text

Abstract:

The objective of this dissertation is to develop electrical modeling and co-simulation methodologies for signal and power integrity of package and board applications. The dissertation includes 1) the application of the finite element method to the optimization for decoupling capacitor selection and placement on a power delivery network (PDN), 2) the development of a PDN modeling method effective for multidimensional and multilayer geometries, 3) the analysis and modeling of return path discontinuities (RPDs), and 4) the implementation of the absorbing boundary condition for PDN modeling. The

APA, Harvard, Vancouver, ISO, and other styles

23

Sheriff, Ray E. "The 2010 Electronics and Telecommunications Research Seminar Series: 9th Workshop Proceedings." University of Bradford, 2010. http://hdl.handle.net/10454/4355.

Full text

Abstract:

yes<br>This is the ninth workshop to be organised under the postgraduate programmes in electrical and electronic engineering (EEE). The workshop concludes the Research Seminar Series, which has provided a platform for disseminating the latest research activities in related technologies through its weekly seminars. The EEE courses cover a broad range of technologies and this is reflected in the variety of topics presented during the workshop. In total, forty-four papers have been selected for the proceedings, which have been divided into eight sections. The workshop aims to be as close to a `re

APA, Harvard, Vancouver, ISO, and other styles

24

Zhang, Shuangfeng. "Wide Bandgap Semiconductor Components Integration in a PCB Substrate for the Development of a High Density Power Electronics Converter." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLS398/document.

Full text

Abstract:

Les nouveaux composants à semi-conducteur de type grand gap ont été développés pour des applications de conversion de puissance en raison de leurs hautes fréquences de commutation (de centaine kHz à quelques MHz) et pertes faibles. Afin de bien profiter ses avantages, la technologie des circuits imprimés (PCB) est intéressante pour une intégration à haute densité de puissance grâce à sa flexibilité et son faible coût. Cependant, à cause de la mauvaise conductivité thermique du matériau FR-4 utilisé pour le substrat PCB et la haute densité de puissance réalisée, il est primordial de trouver des

APA, Harvard, Vancouver, ISO, and other styles

25

Li, Gan. "Stochastic analysis and optimization of power system steady-state with wind farms and electric vehicles." Thesis, University of Birmingham, 2012. http://etheses.bham.ac.uk//id/eprint/3836/.

Full text

Abstract:

Since the end of last century, power systems are more often operating under highly stressed and unpredictable conditions because of not only the market-oriented reform but also the rising of renewable generation and electric vehicles. The uncertain factors resulting from these changes lead to higher requirements for the reliability of power grids. In this situation, conventional deterministic analysis and optimization methods cannot fulfil these requirements very well, so stochastic analysis and optimization methods become more and more important. This thesis tries to cover different aspects o

APA, Harvard, Vancouver, ISO, and other styles

26

Mohamed, Omar R. Ibrahim. "Study of energy efficient supercritical coal-fired power plant dynamic responses and control strategies." Thesis, University of Birmingham, 2012. http://etheses.bham.ac.uk//id/eprint/3662/.

Full text

Abstract:

The world is facing the challenge of global warming and environment protection. On the other hand, the demand of electricity is growing fast due to economic growth and increase in population. Since the growth in demand is also a heavy factor in energy equations, then the renewable energy alone is not able to generate enough electricity to fill the gap within a short time of period. Therefore, fossil fuel such as coal fired power plants cannot be ruled out immediately due to their generation capacity and flexibility in load following. However, any new coal fired stations should be cleaner compa

APA, Harvard, Vancouver, ISO, and other styles

27

Vesterberg, Henrik. "Utredning och åtgärder angående övertoner vid pappersindustri." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-70762.

Full text

Abstract:

Detta arbete behandlar ämnet elkvalité vid en industri i Sverige. Arbetet utfördes vid Vattenfall Eldistribution och elkvalitégruppen. Elkvalité är ett begrepp som innefattar flera egenskaper hos spänningen i vårt elnät. För Vattenfalls del pratar man om ”God elkvalité” Enligt företaget skall det alltid finnas marginal mellan god elkvalité och gällande standarder och föreskrifter. Svensk Standard EN50160 med tillägget A1 är den gällande standarden inom elkvalité och där detta arbete har som utgångspunkt att leva upp till de nivåer som är beskrivna i standarden. Det är med tonvikt på spänningsd

APA, Harvard, Vancouver, ISO, and other styles

28

Caillaud, Rémy. "Integration of a 3.3 kW, AC/DC bidirectional converter using printed circuit board embedding technology." Thesis, Lyon, 2019. http://www.theses.fr/2019LYSEI001/document.

Full text

Abstract:

Les énergies fossiles (Pétrole, Charbon, …) représentent 80 % des énergies consommés. Malheureusement pour l’environnement, elles sont les plus polluantes. Le remplacement actuel des énergies fossiles permet au marché de l’électronique de puissance de grandir d’année en année. L’électronique de puissance permet d’adapter l’énergie électrique à son utilisation finale. Dans la pratique, l’adaptation de l’énergie électrique utilise des convertisseurs. En plus de respecter le volume, l’efficacité et la fiabilité imposés par le cahier des charges pour chaque application, l’électronique de puissance

APA, Harvard, Vancouver, ISO, and other styles

29

Darees, Danielle. "Contribution a l'etude d'associations monolithiques de composants mos et bipolaires : le thyristor a gachette isolee." Toulouse, INSA, 1986. http://www.theses.fr/1986ISAT0029.

Full text

Abstract:

Etude des composants de type "thyristor a gachette isolee" pour les applications en haute tension, forte puissance. On presente des associations monolithiques de composants mos et bipolaires, en precisant les modes possibles de declenchement. On propose une nouvelle approche: substituer une grille mos a la region de gachette des transistors classiques garantissant ainsi, a priori, les capacites bien superieures en tension et en courant. Une modelisation tres poussee des thyristors a commande isolee est effectuee. Conception et realisation d'un thyristor a gachette amplificatrice mos

APA, Harvard, Vancouver, ISO, and other styles

30

Deodhar, Vinita Vasant. "Throughput-Centric Wave-Pipelined Interconnect Circuits for Gigascale Integration." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/7503.

Full text

Abstract:

The central thesis of this research is that VLSI interconnect design strategies should shift from using global wires that can support only a single binary transition during the latency of the line to global wires that can sustain multiple bits traveling simultaneously along the length of the line. It is shown in this thesis that such throughput-centric multibit transmission can be achieved by wave-pipelining the interconnects using repeaters. A holistic analysis of wave-pipelined interconnect circuits, along with the full-custom optimization of these circuits, is performed in this research. W

APA, Harvard, Vancouver, ISO, and other styles

31

Djuric, Bojan. "Contribution à l'interconnexion de composants actifs intégrés dans des substrats laminés : apport des interfaces micro ou nano-structurées." Thesis, Toulouse 3, 2020. http://www.theses.fr/2020TOU30070.

Full text

Abstract:

Les convertisseurs de puissance occupent une place importante dans l'ingénierie des systèmes électriques. Les puissances nominales augmentent et les convertisseurs statiques doivent répondre à ces besoins notamment en termes de compacité. Cette amélioration s'explique notamment par l'utilisation de dispositifs semi-conducteurs à large bande interdite (WBG) à base de carbure de silicium (SiC) et de nitrure de gallium (GaN) qui autorisent des fréquences de découpage et une température de fonctionnement nettement plus élevées. Cependant, les temps de commutation plus courts qui en découlent ne so

APA, Harvard, Vancouver, ISO, and other styles

32

Garbayo, Senosiain Iñigo. "Integration of thin film based micro solid oxide fuel cells in silicon technology." Doctoral thesis, Universitat de Barcelona, 2013. http://hdl.handle.net/10803/131944.

Full text

Abstract:

In the last decades, there has been a huge proliferation of portable devices. Among them, consumer electronics such as mobile phones, music players, e-books, etc. are greatly extended. In order to provide these devices with the required autonomy, a power supply system has to be integrated within the device packaging. This impels the search of integrated power sources that could satisfy the requirements of high power density, long operation lifetime and low cost. Up to now, batteries have been commonly used as power supply for these devices. However, as functionalities increase, the

APA, Harvard, Vancouver, ISO, and other styles

33

Zhang, Heng. "Otahuhu B Power Station condenser in-leakage analysis and condensate monitoring system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Electronics Engineering at Massey University, Wellington, New Zealand." Massey University, 2008. http://hdl.handle.net/10179/950.

Full text

Abstract:

Considerable ongoing risk of condenser in-leakage exists at Otahuhu B (OTB) Power Station. The condenser cooling water used at OTB station is corrosive brackish water with exceedingly high sodium and chloride concentrations. Significant signs of corrosion inside the condenser have been found recently. In the event of condenser in-leakage, the salt contaminants in the cooling water will directly enter the Heat Recovery Steam Generator (HRSG) with the potential for significant and costly damage resulting in a long plant outage. A dynamic mathematical model was developed in the thesis to analyse

APA, Harvard, Vancouver, ISO, and other styles

34

Barazi, Yazan. "Fast short-circuit protection for SiC MOSFETs in extreme short-circuit conditions by integrated functions in CMOS-ASIC technology." Thesis, Toulouse, INPT, 2020. http://www.theses.fr/2020INPT0091.

Full text

Abstract:

Les transistors de puissance grands gaps tels que les MOSFETs SiC et HEMT GaN repoussent les compromis classiques en électronique de puissance. Brièvement, des gains significatifs ont été démontrés par les transistors SiC et GaN: meilleurs rendements, couplés à une augmentation des densités de puissance offertes par la montée en fréquence de découpage. Les MOSFET SiC à haute tension présentent des spécificités telles qu'une faible tenue en court-circuit (SC) par rapport aux IGBT Si et un oxyde de grille aminci, et une tension de commande rapprochée grillesource élevée. La polarisation négative

APA, Harvard, Vancouver, ISO, and other styles

35

Rodriguez-Velez, Ayshka Elise. "Power Mobility Sensor Data Collection Verified through Standardized Pediatric Assessments." UNF Digital Commons, 2018. https://digitalcommons.unf.edu/etd/828.

Full text

Abstract:

The collaboration between the School of Engineering and the Department of Physical Therapy at the University of North Florida has introduced the possibility of creating a new environment for pediatric physical therapy assessments. There are currently no methods for remotely monitoring children with impairments. However, with embedded sensor technology in the form of power mobility and accepted therapy assessment tools, remote monitoring can become a possibility. As a part of this work, a ride-on toy car was developed as a remote monitoring device and a case study with a child with a mobility i

APA, Harvard, Vancouver, ISO, and other styles

36

Sen, Gokhan. "Voltage and Current Programmed Modes in Control of the Z-Source Converter." University of Akron / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=akron1226508637.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Ayadi, Yosri. "3D integration of single electron transistors in the Back-End-Of-Line of 28 nm CMOS technology for the development of ultra-low power sensors." Thèse, Université de Sherbrooke, 2016. http://hdl.handle.net/11143/10122.

Full text

Abstract:

La forte demande et le besoin d’intégration hétérogène de nouvelles fonctionnalités dans les systèmes mobiles et autonomes, tels que les mémoires, capteurs, et interfaces de communication doit prendre en compte les problématiques d’hétérogénéité, de consommation d’énergie et de dissipation de chaleur. Les systèmes mobiles intelligents sont déjà dotés de plusieurs composants de type capteur comme les accéléromètres, les thermomètres et les détecteurs infrarouge. Cependant, jusqu’à aujourd’hui l’intégration de capteurs chimiques dans des systèmes compacts sur puce reste limitée pour des raisons

APA, Harvard, Vancouver, ISO, and other styles

38

Huang, Chih-Jung. "Opto-electronic class AB microwave power amplifier using photoconductive switch technology." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/4458.

Full text

Abstract:

Thesis (Ph.D.)--University of Missouri-Columbia, 2006.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (April 26, 2007) Vita. Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

39

Serdyn, J. J. "Electronic voltage regulator technology for rural electrification." Thesis, Link to the online version, 2008. http://hdl.handle.net/10019/903.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Hensler, Alexander. "Lastwechselfestigkeit von Halbleiter-Leistungsmodulen für den Einsatz in Hybridfahrzeugen." Doctoral thesis, Universitätsbibliothek Chemnitz, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-101573.

Full text

Abstract:

Eine kompakte Integration der Leistungselektronik in einem Fahrzeuggetriebe des Hybridfahrzeugs stellt hohe Anforderungen an die Lastwechselfestigkeit der Halbleiter-Leistungsmodule. Gefordert wird die Auslegung für die Kühlmitteltemperatur von 125°C und für die Sperrschichttemperatur von 200°C. Für die Untersuchung der Lastwechselfestigkeit bei geforderten hohen Temperaturen werden neue Prüfstandskonzepte und Messmethoden vorgestellt. Mit realisierten Testständen wird die Lastwechselfestigkeit der neuen Aufbau- und Verbindungstechnologien „gehärtete Aluminiumbonddrähte”, „Diffusionslöten”, „L

APA, Harvard, Vancouver, ISO, and other styles

41

Yarlagadda, Sriram. "A Battery Management System Using an Active Charge Equalization Yechnique Based on DC-DC Converter Topology." University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1306852610.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Osborne, Mark M. "The computer based analysis & design of custom power technology for industrial applications." Thesis, University of Sunderland, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Etherden, Nicholas. "Increasing the hosting capacity of distributed energy resources using storage and communication." Doctoral thesis, Luleå tekniska universitet, Energivetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-18490.

Full text

Abstract:

This thesis develops methods to increase the amount of renewable energy sources that can be integrated into a power grid. The assessed methods include i) dynamic real-time assessment to enable the grid to be operated closer to its design limits; ii) energy storage and iii) coordinated control of distributed production units. Power grids using such novel techniques are referred to as “Smart Grids”. Under favourable conditions the use of these techniques is an alternative to traditional grid planning like replacement of transformers or construction of a new power line. Distributed Energy Resourc

APA, Harvard, Vancouver, ISO, and other styles

44

Chandrasekhar, Janani. "Signal to power coupling and noise induced jitter in differential signaling." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24778.

Full text

Abstract:

Thesis (M. S.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2008.<br>Committee Chair: Swaminathan Madhavan; Committee Member: Chatterjee Abhijit; Committee Member: Davis Jeffrey.

APA, Harvard, Vancouver, ISO, and other styles

45

Hensler, Alexander. "Lastwechselfestigkeit von Halbleiter-Leistungsmodulen für den Einsatz in Hybridfahrzeugen." Doctoral thesis, Universitätsverlag der Technischen Universität Chemnitz, 2012. https://monarch.qucosa.de/id/qucosa%3A19817.

Full text

Abstract:

Eine kompakte Integration der Leistungselektronik in einem Fahrzeuggetriebe des Hybridfahrzeugs stellt hohe Anforderungen an die Lastwechselfestigkeit der Halbleiter-Leistungsmodule. Gefordert wird die Auslegung für die Kühlmitteltemperatur von 125°C und für die Sperrschichttemperatur von 200°C. Für die Untersuchung der Lastwechselfestigkeit bei geforderten hohen Temperaturen werden neue Prüfstandskonzepte und Messmethoden vorgestellt. Mit realisierten Testständen wird die Lastwechselfestigkeit der neuen Aufbau- und Verbindungstechnologien „gehärtete Aluminiumbonddrähte”, „Diffusionslöten”, „L

APA, Harvard, Vancouver, ISO, and other styles

46

Kotte, Hari Babu. "High Speed (MHz) Switch Mode Power Supplies (SMPS) using Coreless PCB Transformer Technology." Licentiate thesis, Mittuniversitetet, Institutionen för informationsteknologi och medier, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-13964.

Full text

Abstract:

The most essential unit required for all the electronic devices is the Power Supply Unit (PSU). The main objective of power supply designers is to reduce the size, cost and weight, and to increase the power density of the converter. There is also a requirement to have a lower loss in the circuit and hence in the improvement of energy efficiency of the converter circuit. Operating the converter circuits at higher switching frequencies reduces the size of the passive components such as transformers, inductors, and capacitors, which results in a compact size, weight, and increased power density o

APA, Harvard, Vancouver, ISO, and other styles

47

Brooks, Clive Raymond. "GaN microwave power FET nonlinear modelling techniques." Thesis, Stellenbosch : University of Stellenbosch, 2010. http://hdl.handle.net/10019.1/4306.

Full text

Abstract:

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010.<br>ENGLISH ABSTRACT: The main focus of this thesis is to document the formulation, extraction and validation of nonlinear models for the on-wafer gallium nitride (GaN) high-electron mobility (HEMT) devices manufactured at the Interuniversity Microelectronics Centre (IMEC) in Leuven, Belgium. GaN semiconductor technology is fast emerging and it is expected that these devices will play an important role in RF and microwave power amplifier applications. One of the main advantages of the new GaN semicon

APA, Harvard, Vancouver, ISO, and other styles

48

Hofsajer, Ivan William. "Planar technology for integrated multi-kilowatt DC-DC power converters." Thesis, 2014. http://hdl.handle.net/10210/10175.

Full text

Abstract:

M.Ing. (Electrical and Electronic Engineering)<br>In order to increase the overall performance and reduce the cost of power electronic converters, a new technology for the manufacturing of such converters is needed. The aim of this work is to investigate the possibility of the application of planar integrated manufacturing technology, to power electronic converters. A proposal of the definitions, terminology and graphical representation of the integrated structure is discussed together with some examples. A zero-voltage-switching PWM DC-DC converter is used as a case study. A conventionally co

APA, Harvard, Vancouver, ISO, and other styles

49

Roushan, Satish. "Inductive power transfer technology for mobile battery charger." Thesis, 2014. http://ethesis.nitrkl.ac.in/6417/1/E-85.pdf.

Full text

Abstract:

Inductive power transfer (IPT) is an application of electromagnetic induction principle. Since electromagnetic induction phenomena is directly proportional to the operating frequency, so as we increase the operating frequency, amount of energy transfer from one coil to another coil will also increase. As our power supply frequency is 50Hz so at this frequency, amount of energy transfer from one coil to another coil will be very less. In this thesis it is shown that, to transfer maximum amount of energy from one coil to another coil, it is necessary to use IPT at high frequency. At high frequen

APA, Harvard, Vancouver, ISO, and other styles

50

Chu-Kung, Benjamin. "Compound semiconductor power heterojunction bipolar transistor technology /." 2007. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3290207.

Full text

Abstract:

Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2007.<br>Source: Dissertation Abstracts International, Volume: 68-11, Section: B, page: 7533. Adviser: Milton Feng. Includes bibliographical references. Available on microfilm from Pro Quest Information and Learning.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!