Log in

Relevant bibliographies by topics / Power loss analysis / Journal articles

To see the other types of publications on this topic, follow the link: Power loss analysis.

Journal articles on the topic 'Power loss analysis'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Power loss analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Dasman, Dasman. "Analysis of Power Loss of 20 kV Power Distribution." MATEC Web of Conferences 215 (2018): 01040. http://dx.doi.org/10.1051/matecconf/201821501040.

Full text

Abstract:

In the distribution of electrical energy from the plant to the consumer, there is a decrease in quality due to the loss of power (losses). These power losses are caused by a voltage drop across the line and subsequently producing a power loss on the line. This power loss can be classified into two types based on its line parameters, i.e., active power loss and reactive power loss. The line’s active power loss generates losses of power/losses so that the active power reaches the load on the receiving end is always less than the productive power of the sender side. Power losses in the electrical

APA, Harvard, Vancouver, ISO, and other styles

2

Cheng, Ying Ying, Feng Zhou, and Ji Xiao. "Analysis of Active Power Loss for Reactive Power Compensation Devices." Advanced Materials Research 986-987 (July 2014): 1638–42. http://dx.doi.org/10.4028/www.scientific.net/amr.986-987.1638.

Full text

Abstract:

Analyzing the active power loss of reactive power compensation device under normal reactive power output status and its influence factors and metering the active power loss of the reactor in the 500kV substation and the capacitor in the 220kV substation, concluding that the active power meter had the influencing factors of forward and reverse active and putting forward the assessment requirements for the running reactive power compensation device by analyzing the site calibration data of metering device.

APA, Harvard, Vancouver, ISO, and other styles

3

Dewei Xu, Haiwei Lu, Lipei Huang, S. Azuma, M. Kimata, and R. Uchida. "Power loss and junction temperature analysis of power semiconductor devices." IEEE Transactions on Industry Applications 38, no. 5 (2002): 1426–31. http://dx.doi.org/10.1109/tia.2002.802995.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Qin, Li Jun, and Chao Xiong. "The Analysis of Power System Network Loss." Applied Mechanics and Materials 521 (February 2014): 196–99. http://dx.doi.org/10.4028/www.scientific.net/amm.521.196.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wang, Jinhui, Wei Wang, Ming Gu, and Gongqiang Liu. "Analysis of power loss in La0.7Sr0.3MnO3 perovskite." Journal of Magnetism and Magnetic Materials 299, no. 2 (2006): 312–16. http://dx.doi.org/10.1016/j.jmmm.2005.04.019.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

T., Nireekshana, Upadhyay Poonam, Bhavani J., and Krishna Kumari N. "Comparative Analysis of Multi Objective Optimal Power Flow in Power Systems." Journal of Recent Trends in Electrical Power System 3, no. 2 (2020): 1–12. https://doi.org/10.5281/zenodo.3988980.

Full text

Abstract:

<em>This paper consists of the comparative analysis of different methods applied to loss minimization in power system. The objective is to minimize the total power loss and keep the power outputs of generators; bus voltages, shunt capacitors/reactors and transformer tap setting in their specified limits. By maintaining the whole system power loss as minimum there by minimum cost allocation can be achieved. This project explains a comparative analysis between Gradient methods, Search methods and Genetic Algorithm Approach (GA). The Gradient and Search methods are the iterative local optimizatio

APA, Harvard, Vancouver, ISO, and other styles

7

Yoon, ByungKeun, SeungYeon Kim, SangBack Choi, YongSu Jin, Chul Yun, and WhooHyen Kwon. "PV Module Mismatch Power Loss Analysis by Partial Shade and Study for Improving the Power Loss." New & Renewable Energy 12, no. 4 (2016): 14. http://dx.doi.org/10.7849/ksnre.2016.12.12.4.014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Dai, Jing, and Zhi Hua Li. "Analysis of the Energy Efficiency Grades Detection for Power Transformers." Advanced Materials Research 328-330 (September 2011): 1003–7. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.1003.

Full text

Abstract:

There is a lot of power loss in the power transmission, and the loss comes from power transformers contribute very much to this. So the implement of energy efficiency grade for power transformers has great significance to the development of power transformer, which can wash out the high energy-consuming transformer, decrease the power loss, and increase the efficiency of power transmission. The energy consumption of transformer consists of no load loss and load loss. In this test, I analyze the experiments for no load loss and load loss with the “Minimum allowable values of energy efficiency a

APA, Harvard, Vancouver, ISO, and other styles

9

Bizimungu, Silas, Francis Njoka, Churchhill Saoke, and Clement Siame. "ANALYSIS OF RWANDA’S GRID POINT OF STABILITY LOSS." ASEAN Engineering Journal 13, no. 3 (2023): 1–14. http://dx.doi.org/10.11113/aej.v13.18556.

Full text

Abstract:

E Electricity stability is the key component in ensuring reliable power supply which is a major hurdle in most developing countries. Power angle being part of grid stability pillars, this work sought to theoretically and numerically investigate the maximum power angle variation that the power system in Rwanda could experience while maintaining transient stability at an acceptable range beyond which generators lose synchronism affecting overall system stability. A steady state and dynamic stability assessment of the lightly loaded Rwandan grid is conducted using PSS/E while MATLAB is used to ob

APA, Harvard, Vancouver, ISO, and other styles

10

Hoshino, T., N. Yamaji, I. Muta, et al. "Measured-loss analysis of superconducting power transmission cable." IEEE Transactions on Appiled Superconductivity 10, no. 1 (2000): 1223–26. http://dx.doi.org/10.1109/77.828455.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Kondo, K., T. Chiba, S. Yamada, and E. Otsuki. "Analysis of power loss in Ni–Zn ferrites." Journal of Applied Physics 87, no. 9 (2000): 6229–31. http://dx.doi.org/10.1063/1.372663.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Otsuki, E., and S. Yamada. "Analysis of Power Loss in Mn-Zn Ferrites." Le Journal de Physique IV 07, no. C1 (1997): C1–113—C1–114. http://dx.doi.org/10.1051/jp4:1997134.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Matsumori, H., K. Urata, T. Shimizu, K. Takano, and H. Ishii. "Capacitor loss analysis method for power electronics converters." Microelectronics Reliability 88-90 (September 2018): 443–46. http://dx.doi.org/10.1016/j.microrel.2018.07.049.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Volkanovski, Andrija, Antonio Ballesteros Avila, and Miguel Peinador Veira. "Statistical Analysis of Loss of Offsite Power Events." Science and Technology of Nuclear Installations 2016 (2016): 1–9. http://dx.doi.org/10.1155/2016/7692659.

Full text

Abstract:

This paper presents the results of the statistical analysis of the loss of offsite power events (LOOP) registered in four reviewed databases. The reviewed databases include the IRSN (Institut de Radioprotection et de Sûreté Nucléaire) SAPIDE database and the GRS (Gesellschaft für Anlagen- und Reaktorsicherheit mbH) VERA database reviewed over the period from 1992 to 2011. The US NRC (Nuclear Regulatory Commission) Licensee Event Reports (LERs) database and the IAEA International Reporting System (IRS) database were screened for relevant events registered over the period from 1990 to 2013. The

APA, Harvard, Vancouver, ISO, and other styles

15

Wang, Yong Cong, You Kun Zhang, and Yan Hui Lu. "Heat Analysis of Vehicle Drive Axle." Applied Mechanics and Materials 851 (August 2016): 299–303. http://dx.doi.org/10.4028/www.scientific.net/amm.851.299.

Full text

Abstract:

The vehicle drive axle is one of the main sources of power loss in drivetrain system, and its improvements can have a significant impact on vehicle fuel economy. Gears churning loss, bearing friction loss and engaging friction loss all make a great contribution to the heat generation. The temperatures of lubricants, the gear tooth contacting surfaces, and the bearing surfaces are critical to the overall axle performance in terms of power losses, fatigue life, and wear. So it is important to understand the heat generation and dissipation in automotive drive axle. However, the quantities of unde

APA, Harvard, Vancouver, ISO, and other styles

16

Lv, Yan Ling, Chong Teng, and Wen Hai Chen. "Analysis of the Stator Current Change on QFQS-200 Synchronous Generator Loss of Field Procession." Applied Mechanics and Materials 672-674 (October 2014): 1197–200. http://dx.doi.org/10.4028/www.scientific.net/amm.672-674.1197.

Full text

Abstract:

Synchronous generator excitation failure can lead to loss of field, after field loss will lead to the generator lose synchronization. The slip is occurred on the rotor, the generator will absorb a large number of reactive powers from power grid. System voltage is reduced, may make some adjacent point voltage is lower than the allowable values, break the stable operation status between load and power supply, and even make the system voltage collapse; The increased stator current may cause other generator, transformer and circuit overload, make backup protection action, and increase the fault ex

APA, Harvard, Vancouver, ISO, and other styles

17

Lin, James C. "ICONE15-10504 A REALISTIC APPROACH TO THE ANALYSIS OF LOSS OF OFFSITE POWER EVENTS AT NUCLEAR POWER PLANTS." Proceedings of the International Conference on Nuclear Engineering (ICONE) 2007.15 (2007): _ICONE1510. http://dx.doi.org/10.1299/jsmeicone.2007.15._icone1510_269.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Kashihara, Yugo, and Jun-ichi Itoh. "Power Loss Analysis of Three-level Inverter Topologies with No-load Loss." IEEJ Transactions on Industry Applications 134, no. 9 (2014): 842–43. http://dx.doi.org/10.1541/ieejias.134.842.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Yuan, Xiao Hua, and Xian Bin Dai. "Energy-Saving Analysis for Power System Reactive Power Compensation." Advanced Materials Research 608-609 (December 2012): 1151–55. http://dx.doi.org/10.4028/www.scientific.net/amr.608-609.1151.

Full text

Abstract:

The alternator output power in the power system can be divided into active and reactive power. The active power (in kW) is that part of the electrical energy for doing work and heat loss, such as the conversion of mechanical energy, heat, light. The reactive power (in kVar) is that part of the electrical energy for the exchange of electric and magnetic fields in the circuit, such as transformers, motors, through the magnetic field can be passed to convert electrical energy; transmission lines in cable systems and a variety of load reactance (inductance and capacitance), and consumption of reac

APA, Harvard, Vancouver, ISO, and other styles

20

Gianto, Rudy, and Managam Rajagukguk. "Integration of PMSG-Based Wind Turbine into Electric Power Distribution System Load Flow Analysis." WSEAS TRANSACTIONS ON POWER SYSTEMS 17 (March 14, 2022): 45–52. http://dx.doi.org/10.37394/232016.2022.17.5.

Full text

Abstract:

In this paper, a simple method for modeling and integrating PMSG (Permanent Magnet Synchronous Generator)-based WPP (Wind Power Plant) for load flow analysis of electric power distribution systems is proposed. The proposed model is derived based on: (i) the PMSG torque current equations, (ii) the relationships between PMSG voltages/currents in q-axis and d-axis, and (iii) the equations of WPP powers (namely: turbine mechanical power input, WPP power loss and power output). Application of the proposed model in representative electric power distribution system is also investigated and presented

APA, Harvard, Vancouver, ISO, and other styles

21

Abdullazyanov, E. Y., E. I. Gracheva, A. Alzakkar, M. F. Nizamiev, O. A. Shumikhina, and S. Valtchev. "Prediction and analysis of power consumption and power loss at industrial facilities." Power engineering: research, equipment, technology 24, no. 6 (2023): 3–12. http://dx.doi.org/10.30724/1998-9903-2022-24-6-3-12.

Full text

Abstract:

THE PURPOSE. Conduct a study to improve the reliability of forecasting the magnitude of power consumption and power losses at an industrial enterprise.METHODS. Methods are used to determine and predict the parameters of consumption and losses of electricity at industrial facilities.RESULTS. To clarify the magnitude of electricity losses, it is proposed to use coefficients that take into account the type of load curves and show the ratio of the values of the sum of the squares of currents (powers) of the variable load curve and the values of the sum of average currents (powers), that is. the ra

APA, Harvard, Vancouver, ISO, and other styles

22

Jiao, Feng, Shanshan Ding, Juan Li, et al. "Analysis of Loss of Offsite Power Events at China’s Nuclear Power Plants." Sustainability 10, no. 8 (2018): 2680. http://dx.doi.org/10.3390/su10082680.

Full text

Abstract:

The function of the electric power system of nuclear power plants (NPPs) is to provide safe and reliable electricity for the equipment both in normal operation and accident conditions, and to provide emergency power for nuclear safety-related systems to maintain the safety of NPPs. Station blackout (SBO) occurs when loss of offsite power (LOOP) happens concurrently with unavailability of the onsite emergency alternating current (ac) power. LOOP is a precursor of SBO which rarely occurs but contributes significantly to reactor core damage frequency (CDF). Collecting and analyzing all LOOP event

APA, Harvard, Vancouver, ISO, and other styles

23

Al Ameri, Ahmed, Aouchenni Ounissa, Cristian Nichita, and Aouzellag Djamal. "Power Loss Analysis for Wind Power Grid Integration Based on Weibull Distribution." Energies 10, no. 4 (2017): 463. http://dx.doi.org/10.3390/en10040463.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Volkanovski, Andrija, and Miguel Peinador Veira. "Analysis of Loss of Essential Power System Reported in Nuclear Power Plants." Science and Technology of Nuclear Installations 2018 (July 9, 2018): 1–21. http://dx.doi.org/10.1155/2018/3671640.

Full text

Abstract:

The essential power supply system is important for the nuclear safety and accident mitigation of the currently operating nuclear power plants. This system provides electrical power to the essential instrumentation and control systems of the nuclear power plant when all alternate current power sources are lost. This event is known as station blackout (SBO) event. Operational events of failure or deficiency of the essential power supply system are analyzed in this paper. The relevant events were searched and identified in four databases of operational events. The report includes events identifie

APA, Harvard, Vancouver, ISO, and other styles

25

Suroso, Suroso, Winasis Winasis, Daru Tri Nugroho, and Wahyu Tri Cahyanto. "Power loss analysis of current-modules based multilevel current-source power inverters." TELKOMNIKA (Telecommunication Computing Electronics and Control) 17, no. 1 (2019): 453. http://dx.doi.org/10.12928/telkomnika.v17i1.11601.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Volkanovski, Andrija, Antonio Ballesteros Avila, Miguel Peinador Veira, Duško Kančev, Michael Maqua, and Jean-Luc Stephan. "Analysis of loss of offsite power events reported in nuclear power plants." Nuclear Engineering and Design 307 (October 2016): 234–48. http://dx.doi.org/10.1016/j.nucengdes.2016.07.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Suroso, Winasis, Tri Nugroho Daru, and Tri Cahyanto Wahyu. "Power loss analysis of current-modules based multilevel current-source power inverters." TELKOMNIKA Telecommunication, Computing, Electronics and Control 17, no. 1 (2019): 453–62. https://doi.org/10.12928/TELKOMNIKA. v17i1.11601.

Full text

Abstract:

A power loss analysis of multilevel current-source inverter (MCSI) circuits developed from two basic configurations of three-level current-source inverters, i.e. H-bridge and common-emitter inverter configurations is presented and discussed. The first circuit topology of the MCSI is developed by using DC current modules connected to the primary three-level H-bridge inverter. The second MCSI circuit is created by connecting the current-modules to a three-level common-emitter inverter. The DC current modules work generating the intermediate level waveform of the inverter circuits. Power loss ana

APA, Harvard, Vancouver, ISO, and other styles

28

Koprivica, Branko, Marko Rosic, and Krzysztof Chwastek. "Time domain analysis of excess loss in electrical steel." Serbian Journal of Electrical Engineering 16, no. 3 (2019): 439–54. http://dx.doi.org/10.2298/sjee1903439k.

Full text

Abstract:

The aim of this paper is to present a comprehensive approach to analyse and interpret power loss in ferromagnetic materials with particular attention devoted to excess power loss. Experimental results obtained with an Epstein frame and toroidal core made of electrical steel are presented in the paper, including quasistatic and dynamic hysteresis loops. According to the time waveforms of the measured magnetic field and magnetic flux density, an instantaneous power loss is calculated for the quasistatic and dynamic case. Moreover, the instantaneous power loss due to eddy current is calculated, a

APA, Harvard, Vancouver, ISO, and other styles

29

Birel, Fırat Kıyas, and Güneş Şeker. "Power Loss (ENTROPY) Scale in Schools." International Journal of Psychology and Educational Studies 12, no. 1 (2025): 1–15. https://doi.org/10.52380/ijpes.2025.12.1.1412.

Full text

Abstract:

The research aims to develop a measurement tool with validity and reliability for measuring loss of power (entropy) in schools. The study group of the research consists of a total of 596 teachers working in 15 public schools in Van Province in the 2023-2024 academic year. As a result of the application of Exploratory Factor Analysis (EFA) to 381 teachers to ensure construct validity, a scale with 26 items and four factors, 1. People-oriented work environment and parents, 2. Energy use and environment, 3. Technology, 4. Achievement of goals and supervision—was created. The total variance rate o

APA, Harvard, Vancouver, ISO, and other styles

30

Ranjeeta, Sugandhi, and Aspalli M.S. "A Cascaded H-Bridge Multilevel Inverter with Reduced Number of Switches." International Journal of Innovative Technology and Exploring Engineering (IJITEE) 9, no. 12 (2020): 344–47. https://doi.org/10.35940/ijitee.L8021.1091220.

Full text

Abstract:

This paper presents simulation of a 5-level cascaded H-bridge multilevel inverter, with reduce the number of power switching devices in the current flow direction. The propose topology consists of a five switches with double DC sources. The analysis is designing a new topology for a single phase cascaded multilevel H-bridge inverter (CHBMLI), with a focus on the number of power switching devices in the current flow direction. Conduction and switching losses have to be reduced to achieve higher performance operation of power electronic devices. Multilevel inverters are designed to achieve the d

APA, Harvard, Vancouver, ISO, and other styles

31

Yin, Hua Bing, Shen Long Li, He Zhang, Xin Yuan Zhao, and Jin Zhang. "The Power Loss and Efficiency Analysis of a 3DOFs Planetary Gear Box." Advanced Materials Research 834-836 (October 2013): 1285–89. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.1285.

Full text

Abstract:

The power loss and efficiency model of a planetary gear transmission system was built with a system modeling method. The method takes many transmission elements such as gear, planetary gear sets, hydraulic torque converter, friction disk, lubrication, sealing, bump and motor etc. into consideration and calculates non-load and load power loss for each element. The overall calculated power loss and efficiency is more accurate than the meshing power method. To make simulation more reliable it is compared with the test data. In the paper some planetary gearbox is selected and its power loss and ef

APA, Harvard, Vancouver, ISO, and other styles

32

Weng, Xue Tao, Rui Huo, Shu Ying Li, and Cui Ping Liu. "Research on Evaluation of Vibration Isolation Efficiency Based on Power Flow Analysis." Applied Mechanics and Materials 590 (June 2014): 149–54. http://dx.doi.org/10.4028/www.scientific.net/amm.590.149.

Full text

Abstract:

Problems of estimation of vibration isolation effectiveness are discussed based on vibratory power flow analysis, and a new insertion loss character — power flow insertion loss is proposed for evaluation of isolation efficiency. Spectra characteristics of the power flow insertion loss and their relationship with transmitted power flow and vibration level difference are investigated through numerical simulation. And in consideration of the inconvenience of practical testing of insertion loss and power flow, an attempt is made to set up numerical correspondence between power flow insertion loss

APA, Harvard, Vancouver, ISO, and other styles

33

Osaloni, Oluwafunso Oluwole, Ayodeji Stephen Akinyemi, Abayomi Aduragba Adebiyi, and Oladapo Tolulope Ibitoye. "Power Loss Analysis with Dispersed Generation in Multifunction Power Conditioner Design to Improve Power Quality." WSEAS TRANSACTIONS ON POWER SYSTEMS 18 (June 30, 2023): 94–103. http://dx.doi.org/10.37394/232016.2023.18.10.

Full text

Abstract:

The recent modification in utilizing Multifunction Power Conditioner (MPC) such as Unified Power Quality Conditioner devices in power systems has led to different degrees of power losses, owing to electronic power impacts. This paper presents a detailed comparison of power loss analysis in various configurations of MPC, that is, the conventional unified power quality conditioner (UPQC) and the UPQC with distributed generation (〖UPQC〗_DG). The independent losses based on inverter design and distributed generation interfacing to the distribution form the basis for each configuration case. The in

APA, Harvard, Vancouver, ISO, and other styles

34

Dalvir, Singh &. Prof. Rupinderjit Singh Kathuria. "FAULT PREDICTION AND ANALYSIS TECHNIQUES OF SOLAR CELLS AND PV MODULES." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 7, no. 8 (2018): 384–99. https://doi.org/10.5281/zenodo.1345669.

Full text

Abstract:

The photovoltaic market has quickly increasing over a couple of years. One of the main reasons for this high growth in PV industry is the reduction of PV production costs. The output power obtained from the PV module is mainly depend upon the two parameters named as irradiance and temperature. There are number of factors that affects the performance of the PV array, such as diode and connection loss, mismatch loss, DC/AC wring loss, sun tracking loss, shading loss, soiling loss and material loss. From the above mentioned techniques, in the proposed research work, we have considered three fault

APA, Harvard, Vancouver, ISO, and other styles

35

Wu, Jing Qiu, Dao Fei Zhu, Hua Wang, and Yong Zhu. "Exergetic Analysis of a Solar Thermal Power Plant." Advanced Materials Research 724-725 (August 2013): 156–62. http://dx.doi.org/10.4028/www.scientific.net/amr.724-725.156.

Full text

Abstract:

The study of heat loss and exergy loss distribution in the power plant system plays a very important role in improving the efficiency of the system. In this paper, a dynamic simulation model of the 5MW solar thermal power system is established. Then, the simulation test with the actual data in a solar thermal power plant is carried out, and we analyze the heat and the exergy loss of the system. The results show that, the heat loss of the condenser is the largest, up to 72%. To increase the thermal efficiency of the system, the energy-saving research for the condenser should be pay attention to

APA, Harvard, Vancouver, ISO, and other styles

36

Wang, Feng, Yifan Song, Wang Dou, et al. "High Power Density IGBT Loss Calculation Model and Analysis." Energies 18, no. 4 (2025): 997. https://doi.org/10.3390/en18040997.

Full text

Abstract:

This paper presents the establishment of an accurate loss model for high-power-density IGBT modules used in electric vehicles, leveraging the thermal simulation capabilities of the power electronics simulation software PLECS 4.1. The study aims to address the significant influence of IGBT losses on the energy efficiency and reliability of electric vehicles. A simulation model was built using the SVPWM modulation strategy to drive a three-phase inverter, and the average loss method was employed to determine both conduction and switching losses. The simulation results were compared with calculat

APA, Harvard, Vancouver, ISO, and other styles

37

Vasu, Sharma, and Satish Saini Dr. "Prediction of Power Loss in Grid Using Neural Network." International Journal of Innovative Research in Engineering and Management (IJIREM) 10, no. 04 (2023): 77–85. https://doi.org/10.55524/ijirem.2023.10.4.9.

Full text

Abstract:

This Paper proposes a data-driven approach for grid loss prediction in power systems. It utilizes a comprehensive dataset with relevant features such as grid load, temperature forecasts, and calendar data. The dataset is pre-processed by handling missing values, normalizing features, and encoding cyclic calendar features. A Long Short-Term Memory (LSTM) recurrent neural network is employed for the prediction model, capturing temporal dependencies and generating forecasts of grid loss two hours ahead. The model is trained using mean absolute error (MAE) as the loss function and optimized throug

APA, Harvard, Vancouver, ISO, and other styles

38

Song, Dong-Soo. "Analysis of Loss of HVAC for Nuclear Power Plant." Journal of Energy Engineering 23, no. 1 (2014): 90–94. http://dx.doi.org/10.5855/energy.2014.23.1.090.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Kim, Min-Kook, Dong-Gyun Woo, Byoung-Kuk Lee, Nam-Jun Kim, and Jong-Soo Kim. "Loss Analysis of Power Conversion Equipment for Efficiency Improvement." Transactions of the Korean Institute of Power Electronics 19, no. 1 (2014): 80–90. http://dx.doi.org/10.6113/tkpe.2014.19.1.80.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Jang, Seungyong, Sanghoon Han, and Jaeho Choi. "Power Loss Analysis of Transformer Caused By Current Harmonics." Transactions of the Korean Institute of Power Electronics 21, no. 1 (2016): 34–41. http://dx.doi.org/10.6113/tkpe.2016.21.1.34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Pengchan, Weera, Toempong Phetchakul, and Amporn Poyai. "Power Loss Analysis Based on Leakage Currentin PN Junctions." Advanced Materials Research 739 (August 2013): 90–93. http://dx.doi.org/10.4028/www.scientific.net/amr.739.90.

Full text

Abstract:

This paper is proposed to analyze the power loss from leakage current in p-n junctions in case of non-uniform defects. The different geometry p-n junctions have been fabricated by a standard 0.8 micron CMOS technology. The diode fabricated by the ion implantation process with two different condition. The reverse current and voltage (I-V)characteristics at varied temperature of p-n junctions have been measured. The power loss coefficient can be extracted from the leakage current versus temperature. Form the derivative of leakage current with temperature, the power loss with prediction trend cur

APA, Harvard, Vancouver, ISO, and other styles

42

Sachidananda, H. K., K. Raghunandana, and B. Shivamurthy. "Power loss analysis in altered tooth-sum spur gearing." MATEC Web of Conferences 144 (2018): 01015. http://dx.doi.org/10.1051/matecconf/201714401015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Lan, H., S. Wen, Q. Fu, D. C. Yu, and L. Zhang. "Modeling Analysis and Improvement of Power Loss in Microgrid." Mathematical Problems in Engineering 2015 (2015): 1–8. http://dx.doi.org/10.1155/2015/493560.

Full text

Abstract:

The consumption of conventional energy sources and environmental concerns have resulted in rapid growth in the amount of renewable energy introduced to power systems. With the help of distributed generations (DG), the improvement of power loss and voltage profile can be the salient benefits. However, studies show that improper placement and size of energy storage system (ESS) lead to undesired power loss and the risk of voltage stability, especially in the case of high renewable energy penetration. To solve the problem, this paper sets up a microgrid based on IEEE 34-bus distribution system wh

APA, Harvard, Vancouver, ISO, and other styles

44

Zhou, Ying, Feixiang Gong, Qing Li, Shupeng Li, Xianxu Huo, and Dezhi Li. "Statistical Analysis and Countermeasures of Major Power Customer Loss." IOP Conference Series: Earth and Environmental Science 453 (April 10, 2020): 012057. http://dx.doi.org/10.1088/1755-1315/453/1/012057.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Darnowski, Piotr, Eleonora Skrzypek, Piotr Mazgaj, Konrad Świrski, and Pascal Gandrille. "Total loss of AC power analysis for EPR reactor." Nuclear Engineering and Design 289 (August 2015): 8–18. http://dx.doi.org/10.1016/j.nucengdes.2015.03.020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Bonfiglio, Andrea, Damiano Lanzarotto, Mario Marchesoni, Massimiliano Passalacqua, Renato Procopio, and Matteo Repetto. "Electrical-Loss Analysis of Power-Split Hybrid Electric Vehicles." Energies 10, no. 12 (2017): 2142. http://dx.doi.org/10.3390/en10122142.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Wu, Z. Q., and G. Z. Chen. "MVA power flow and loss analysis for electricity market." IEE Proceedings - Generation, Transmission and Distribution 148, no. 2 (2001): 153. http://dx.doi.org/10.1049/ip-gtd:20010018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Sachidananda, H. K., K. Raghunandana, and B. Shivamurthy. "Power loss analysis in altered tooth-sum spur gearing." MATEC Web of Conferences 144 (2018): 01015. http://dx.doi.org/10.1051/matecconf/201814401015.

Full text

Abstract:

The main cause of power loss or dissipation of heat in case of meshed gears is due to friction existing between gear tooth mesh and is a major concern in low rotational speed gears, whereas in case of high operating speed the power loss taking place due to compression of air-lubricant mixture (churning losses) and windage losses due to aerodynamic trial of air lubricant mixture which controls the total efficiency needs to be considered. Therefore, in order to improve mechanical efficiency it is necessary for gear designer during gear tooth optimization to consider these energy losses. In this

APA, Harvard, Vancouver, ISO, and other styles

49

Harpen, Michael D. "Analysis of sample power loss in MRI gradient fields." Medical Physics 18, no. 2 (1991): 313–15. http://dx.doi.org/10.1118/1.596677.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Manikandan, A. "6T and 8T SRAM Cell Simulation with Power Loss Analysis." Journal of Electronics,Computer Networking and Applied Mathematics, no. 21 (January 18, 2022): 17–23. http://dx.doi.org/10.55529/jecnam.21.17.23.

Full text

Abstract:

Reducing the power consumption in a VLSI circuits is a prime concern now a days. Memory circuits play an important role in the design of electronic small power devices. Almost every digital systems is having memory as an important part in their design. The high speed circuits dissipate a considerable amount of power in a short time. In this paper conventional SRAM cell is modified little bit to reduce the dynamic power dissipation. The overall capacitance reduced by adding few extra transistors. Because of the fact that charging and the discharging of the bit lines consumes the most power , so

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!