Relevant bibliographies by topics / Power system measurements

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Power system measurements'

Author: Grafiati
Published: 4 June 2021
Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Power system measurements.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Power system measurements"

1

Tanyi, Emmanuel, and Edwin Mbinkar. "Real-Time State Estimation in the Cameroon Power System." ISRN Power Engineering 2013 (September 16, 2013): 1–10. http://dx.doi.org/10.1155/2013/871827.

Full text
Abstract:
An important tool for the energy management system (EMS) is state estimation. Based on measurements taken throughout the network, state estimation gives an estimation of the state variables of the power system while checking that these estimates are consistent with the measurements. Currently, in the Cameroon power system, state estimates have been provided by ad hoc supervisory control and data acquisition (SCADA) systems. A disadvantage is that the measurements are not synchronised, which means that state estimation is not very precise during dynamic phenomena in the network. In this paper,
APA, Harvard, Vancouver, ISO, and other styles
2

Athani, V. V. "Power System Measurements Using Microprocessors." IETE Technical Review 2, no. 9 (1985): 302–6. http://dx.doi.org/10.1080/02564602.1985.11437822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Ajit. "Power System Stabilizers Design for Multimachine Power Systems Using Local Measurements." IEEE Transactions on Power Systems 31, no. 3 (2016): 2163–71. http://dx.doi.org/10.1109/tpwrs.2015.2460260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ponnala, Ravi. "Dynamic Power System Monitoring and Protection Using Phasor Measurements and Less Data Storage System." Journal of Advanced Research in Dynamical and Control Systems 12, SP8 (2020): 625–36. http://dx.doi.org/10.5373/jardcs/v12sp8/20202564.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pohovski, Toni, Vjenceslav Kuprešanin, Filip Razum, Davor Švarc, and Matej Dorešić. "Automated Measurement System of High Accuracy for Shunt Reactors." Journal of Energy - Energija 73, no. 2 (2024): 3–7. http://dx.doi.org/10.37798/2024732515.

Full text
Abstract:
System for automated transformer tests (ATT) enables different measurements on power transformers, from simple to the most complex, with a high degree of automation. ATT system is now expanded with modules for measurements on shunt reactors. The measurements related to shunt reactors that are covered with the system are: measurement of losses, impedance measurement, linearity test, zero impedance measurement, winding resistance measurement, temperature rise test and measurement of mutual reactance. Besides the measurement, ATT enables data analysis and report generation, all in accordance with
APA, Harvard, Vancouver, ISO, and other styles
6

Dzwonkowski, Ariel, and Leon Swędrowski. "Uncertainty analysis of measuring system for instantaneous power research." Metrology and Measurement Systems 19, no. 3 (2012): 573–82. http://dx.doi.org/10.2478/v10178-012-0050-7.

Full text
Abstract:
Abstract The electrical power drawn by an induction motor is distorted in case of appearance of a certain type of failures. Under spectral analysis of the instantaneous power one obtains the components which are connected with definite types of damage. An analysis of the amplitudes and frequencies of the components allows to recognize the type of fault. The paper presents a metrological analysis of the measurement system used for diagnosis of induction motor bearings, based on the analysis of the instantaneous power. This system was implemented as a set of devices with dedicated software insta
APA, Harvard, Vancouver, ISO, and other styles
7

Ainun, Mufid, and Linda Suyati. "Bioelectricity of Various Carbon Sources on Series Circuit from Microbial Fuel Cell System using Lactobacillus plantarum." Jurnal Kimia Sains dan Aplikasi 21, no. 2 (2018): 70–74. http://dx.doi.org/10.14710/jksa.21.2.70-74.

Full text
Abstract:
Study on bioelectrisity various carbon sources on the circuit series Microbial Fuel Cell using Lactobacillus plantarum has been conducted. This study aims to determine the electrical energy generated by various types of substrates in MFC and determe the effect of a series circuit of the electrical energy produced using Lactobacillus plantarum. The research stage consisted of preparation stages MFC components, electrical power measurements on variations in the type of substrate, and the measurement of electrical power in series circuit variation. Electrical power measurements were performed on
APA, Harvard, Vancouver, ISO, and other styles
8

Gómez-Ruiz, Gabriel, Reyes Sánchez-Herrera, Aránzazu D. Martin, and José M. Andújar. "Optimum System for Diagnosing Power Quality in Electrical Microgrids." Applied Sciences 14, no. 17 (2024): 7666. http://dx.doi.org/10.3390/app14177666.

Full text
Abstract:
An electrical measurement network designed for analyzing power quality within microgrids is presented in this paper. It is very portable and easy to install across various types of microgrids. Data collected by the system meet the standards for measuring electrical parameters, calculating waveforms spectra and comparing results from different microgrid nodes. The measurements provided by the network are useful for both utility and consumer sides. The system’s effectiveness is verified through two experimental setups, specifically built ad hoc: one for testing the accuracy of the measurements o
APA, Harvard, Vancouver, ISO, and other styles
9

Khokhlov, Mikhail, and Olga Pozdnyakova. "The impact of system nonlinearities in the problem of optimal PMU placement for power system state estimation." E3S Web of Conferences 216 (2020): 01041. http://dx.doi.org/10.1051/e3sconf/202021601041.

Full text
Abstract:
In PMU-based state estimation, a linear measurement model with phasors of both state variables and measurements expressed in rectangular coordinates has proven efficiency. The rectangular coordinate formulation is also used in optimal PMU placement problem aimed at providing the power system state estimation with the most informative measurements. In this case, it is assumed that the linearity of the measurement model ensures the optimality of the found placement of PMUs for any steady-state operating condition of the power system. The results presented in this paper show that this is not the
APA, Harvard, Vancouver, ISO, and other styles
10

Liao, Chongwei, Weixin Zhang, Yujie Peng, and Changjun Liu. "Study on Height Measurement for Polyethylene Terephthalate (PET) Materials Based on Residual Networks." Sensors 25, no. 13 (2025): 4030. https://doi.org/10.3390/s25134030.

Full text
Abstract:
In industrial production, high-power microwaves are commonly used for heating and drying processes; however, their application in measurement is relatively limited. This paper presents a power measurement system to enhance the use of microwave measurements in industry and improve the efficiency of microwave drying for PET particles. Operating at 2.45 GHz, the system integrates four-port power measurements based on the multilayer perceptron (MLP). By introducing residual connectivity, the residual network is determined to detect the height of PET particles. Experimental results show that this s
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Power system measurements"

1

Fan, Dawei. "Synchronized Measurements And Applications During Power System Dynamics." Diss., Virginia Tech, 2008. http://hdl.handle.net/10919/26115.

Full text
Abstract:
Synchronized phasor measurements during dynamics tend to be affected by prevailing system frequency. Some major blackouts in power systems are indeed featured with very large frequency disturbance. Quantitative study done in this dissertation shows that small frequency disturbance may lead to measurement errors, and large frequency disturbance may lead to wrong measurements as well as catastrophic results if applied in system protection and control. The purpose of this dissertation is to bring up this issue, point to some possible solutions and application examples. A synchronized frequency m
APA, Harvard, Vancouver, ISO, and other styles
2

Gerrard, Carl Andrew. "Remote monitoring of power system conductor voltages." Thesis, University of Liverpool, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.263990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Guoping. "Oscillation monitoring system based on wide area phasor measurements in power systems." Pullman, Wash. : Washington State University, 2010. http://www.dissertations.wsu.edu/Dissertations/Summer2010/g_liu_060110.pdf.

Full text
Abstract:
Thesis (Ph. D.)--Washington State University, August 2010.<br>Title from PDF title page (viewed on July 23, 2010). "School of Electrical Engineering and Computer Science." Includes bibliographical references (p. 76-81).
APA, Harvard, Vancouver, ISO, and other styles
4

Atkinson-Hope, Gary. "Power system harmonic field measurements PC simulations and standards." Master's thesis, University of Cape Town, 1996. http://hdl.handle.net/11427/17435.

Full text
Abstract:
Includes bibliography.<br>The research covered three main objectives: Application of PC based harmonic penetration packages and a comparison of their simulation results. Investigation and comparison of the IEEE, IEC and ESKOM power system harmonic standards. Measurement of harmonics in two industrial networks and the application of the results to the regulatory limits provided by the standards. The research makes use of two packages and uses parameters from an industrial network. Case studies were conducted using the same parameters so that the results obtained from each package could be compa
APA, Harvard, Vancouver, ISO, and other styles
5

Freeman, Matthew A. "Multi-area power system state estimation utilizing boundary measurements and phasor measurement units ( PMUs)." Thesis, Texas A&M University, 2006. http://hdl.handle.net/1969.1/4178.

Full text
Abstract:
The objective of this thesis is to prove the validity of a multi-area state estimator and investigate the advantages it provides over a serial state estimator. This is done utilizing the IEEE 118 Bus Test System as a sample system. This thesis investigates the benefits that stem from utilizing a multi-area state estimator instead of a serial state estimator. These benefits are largely in the form of increased accuracy and decreased processing time. First, the theory behind power system state estimation is explained for a simple serial estimator. Then the thesis shows how conventional measureme
APA, Harvard, Vancouver, ISO, and other styles
6

Kusekwa, Mashauri A. D. "Real-time state estimation of a distributed electrical power system under conditions of deregulation." Thesis, Cape Peninsula University of Technology, 2010. http://hdl.handle.net/20.500.11838/2186.

Full text
Abstract:
Thesis (DTech (Electrical Engineering))--Cape Peninsula University of Technology, 2010.<br>Static state estimation is a mathematical procedure in which physical measurements from sub-stations and physical model are combined in an optimal way. That is, the measurements obtained from the sub-stations are used with the physical model and the states of the power system are selected or calculated such that the states match the measurements in some best way. The states of a power system are the bus voltage magnitude and voltage angle of each bus of the system. Static state estimation is an inc
APA, Harvard, Vancouver, ISO, and other styles
7

Thunberg, Erik. "On the Benefit of Harmonic Measurements in Power Systems." Doctoral thesis, Stockholm, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dong, Jingyuan. "Power System Disturbance Analysis and Detection Based on Wide-Area Measurements." Diss., Virginia Tech, 2008. http://hdl.handle.net/10919/30129.

Full text
Abstract:
Wide-area measurement systems (WAMS) enable the monitoring of overall bulk power systems and provide critical information for understanding and responding to power system disturbances and cascading failures. The North American Frequency Monitoring Network (FNET) takes GPS-synchronized wide-area measurements in a low-cost, easily deployable manner at the 120 V distribution level, which presents more opportunities to study power system dynamics. This work explores the topics of power system disturbance analysis and detection by utilizing the wide-area measurements obtained in the distribution ne
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, Yilu. "Power system equipment modeling based on wide frequency external impedance measurements /." The Ohio State University, 1989. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487675687172407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Janssen, Pierre. "Monitoring, protection and fault location in power distribution networks using system-wide measurements." Doctoral thesis, Universite Libre de Bruxelles, 2013. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/209366.

Full text
Abstract:
This work takes place in the context of distribution grids with high level of distributed generation, for example in microgrids. With high level of distributed generation, it has been shown that selective, fast and sensitive network protection is expected to be more difficult. Furthermore, during system restoration, the accurate fault location could be more challenging to assess, thereby increasing the average outage duration.<p>Thanks to cost reductions and improvement of information and communication technologies, future distribution networks will probably have advanced communication infrast
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Power system measurements"

1

National Institute of Standards and Technology (U.S.), ed. Power measurement system for 1 mW at 1 GHz. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kezunovic, Mladen, Sakis Meliopoulos, Vaithianathan Venkatasubramanian, and Vijay Vittal. Application of Time-Synchronized Measurements in Power System Transmission Networks. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06218-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Toivonen, Lassi. Measurement methods for electric power systems. Helsinki University of Technology, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sauer, Peter W., M. A. Pai, and Joe H. Chow. Power System Dynamics and Stability: With Synchrophasor Measurement and Power System Toolbox 2e. John Wiley & Sons, Ltd, 2017. http://dx.doi.org/10.1002/9781119355755.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mazur, Glen. Power quality: Measurement and troubleshooting. American Technical Publishers, Inc., 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Engineers, Society of Automotive, ed. Fluid power technology & systems. Society of Automotive Engineers, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Jianming. Measurement and Analysis of Overvoltages in Power Systems. John Wiley & Sons Singapore Pte. Ltd., 2018. http://dx.doi.org/10.1002/9781119129035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

(Firm), ALSTOM. Network protection & automation guide: Protective relays, measurement & control. Alstom Grid, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Caramia, Pierluigi. Power quality indices in liberalized markets. J. Wiley, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Goodenow, T. C. Robust, accurate, and non-contacting vibration measurement systems. U.S. Nuclear Regulatory Commission, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Power system measurements"

1

Brown Do Coutto Filho, Milton. "Handling Corrupted Measurements." In Power System State Estimation and Forecasting. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-63288-4_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Obikwelu, Chukwuemeka, and Sakis Meliopoulos. "Optimized Power System Voltage Measurements Considering Power System Harmonic Effects." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-73585-2_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lešić, Mia, and Tatjana Konjić. "Power Quality Field Measurements on Photovoltaic System." In Lecture Notes in Networks and Systems. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-71321-2_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ma, Jian, “Mani” Vaithianathan Venkatasubramanian, Scott Feuerborn, Clifton Black, Mark Halpin, and Shih-Min Hsu. "A Software Suite for Power System Stability Monitoring Based on Synchrophasor Measurements." In Power Electronics and Power Systems. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-89378-5_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Thorp, James S., Steven M. Rovnyak, and Chih-Wen Liu. "Application of Real-Time Phasor Measurements in Power System Control." In Systems and Control Theory For Power Systems. Springer New York, 1995. http://dx.doi.org/10.1007/978-1-4757-2433-2_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gonzalez-Longatt, Francisco M., José Luis Rueda, C. A. Charalambous, and P. De Oliveira. "Estimation of Equivalent Model for Cluster of Induction Generator Based on PMU Measurements." In PowerFactory Applications for Power System Analysis. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-12958-7_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kundu, Shubhrajyoti, Anil Kumar, Mehebub Alam, Biman Kumar Saha Roy, and Siddhartha Sankar Thakur. "Unscented Kalman Filter Based Dynamic State Estimation in Power Systems Using Complex Synchronized PMU Measurements." In Control Applications in Modern Power System. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Almeida, Javier, Silvana Gamboa, and Jackeline Abad. "Decoupled Distributed State Estimator with Reduced Number of Measurements for Power System Applications." In Lecture Notes in Electrical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-08942-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lang, Sebastian, Nico Zimmermann, Josef Mayr, Konrad Wegener, and Markus Bambach. "Thermal Error Compensation Models Utilizing the Power Consumption of Machine Tools." In Lecture Notes in Production Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34486-2_4.

Full text
Abstract:
AbstractThermal errors are among the most significant contributors to deviations of products manufactured on modern machine tools (MTs). Reducing them is typically achieved through either design adaptation, active cooling of the MT and its environment, or compensation using measurements or model-based predictions. Model-based compensation strategies promise to have the lowest environmental footprint by far. In general, a compensation model needs to be accurate, robust to changing boundary conditions and must require only minimal experimental efforts as this reduces the productivity of the MT.
APA, Harvard, Vancouver, ISO, and other styles
10

Shrivastava, Divya Rishi, Shahbaz Ahmed Siddiqui, and Kusum Verma. "Synchrophasor Measurements Assisted Naïve Bayes Classification Based Real-Time Transient Stability Prediction of Power System." In Intelligent Computing Techniques for Smart Energy Systems. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0214-9_103.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Power system measurements"

1

Ritzmann, Deborah, Paul Wright, Peter Davis, Stefano Lodetti, and Charlotte Grant. "Verification of Power System Inertia Measurements." In 2024 Conference on Precision Electromagnetic Measurements (CPEM). IEEE, 2024. http://dx.doi.org/10.1109/cpem61406.2024.10646017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ali, Maryam Salim, Amjed Jumaah, and Aseel A. Qasim. "Automatic Irrigation System Using Solar Power System." In 2025 XXVIII International Conference on Soft Computing and Measurements (SCM). IEEE, 2025. https://doi.org/10.1109/scm66446.2025.11060342.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mattoo, Himani, Sreenath J.G, and Praveen Tripathy. "Distribution System State Estimation Considering Asynchronous Heterogeneous Measurements." In 2024 IEEE Power & Energy Society General Meeting (PESGM). IEEE, 2024. http://dx.doi.org/10.1109/pesgm51994.2024.10689066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Riepnieks, Artis, and Harold Kirkham. "Improving Trust in Power System Measurements." In 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023). AHFE International, 2023. http://dx.doi.org/10.54941/ahfe1003577.

Full text
Abstract:
The power grid is a large and complex system. The system becomes larger and more complex daily. Distributed energy resources and a more active customer role are factors adding to the complexity. This complicated system is operated by a combination of human operators and automation. Effective control of the power grid requires an increasing amount of automation to support system operators. The need for more support from automation can only increase as operational complexity increases.Actions in controlling the system are entirely dependent on the results of measurements. Measurements inform dec
APA, Harvard, Vancouver, ISO, and other styles
5

Park, Y. T., and W. M. S. Wijesinghe. "Power test system for standby power." In 2012 Conference on Precision Electromagnetic Measurements (CPEM 2012). IEEE, 2012. http://dx.doi.org/10.1109/cpem.2012.6250692.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kumar, Ajit. "Power system stabilizers design for multimachine power systems using local measurements." In 2016 IEEE Power and Energy Society General Meeting (PESGM). IEEE, 2016. http://dx.doi.org/10.1109/pesgm.2016.7741619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kumar, Ravindra, and Dinanath Prasad. "Effect of bad measurements on state estimation in power system." In 2012 IEEE Fifth Power India Conference. IEEE, 2012. http://dx.doi.org/10.1109/poweri.2012.6479495.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Wei, Bowen Hu, Yun Wang, Ge Chen, and Yadong Zhou. "Identification of bad measurements in power system from historical measurement data." In 2021 China Automation Congress (CAC). IEEE, 2021. http://dx.doi.org/10.1109/cac53003.2021.9728365.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Yu, Ramtin Madani, and Javad Lavaei. "Power system state estimation with line measurements." In 2016 IEEE 55th Conference on Decision and Control (CDC). IEEE, 2016. http://dx.doi.org/10.1109/cdc.2016.7798622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kang, H., M. Bazargan, and C. Mycock. "Wide area measurements for power system stability." In 2011 IEEE International Conference on Advanced Power System Automation and Protection (APAP). IEEE, 2011. http://dx.doi.org/10.1109/apap.2011.6180783.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Power system measurements"

1

Follum, James, Harold Kirkham, Artis Riepnieks, et al. Roadmap for Advanced Power System Measurements. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1871292.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Driesse, Anton, and Joshua Stein. From IEC 61853 power measurements to PV system simulations. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1615179.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Esch, Ernst, Jeffrey Goettee, and James Jurney. Power and Power Factor Measurements on the Induction Heating System at TA-46. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1160099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Phadke, A. G., and J. S. Thorp. Monitoring and simulating real-time electric power system operation with phasor measurements. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/10125609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Myers, Tanya L., Christopher A. Bonebrake, Bret D. Cannon, Reynold Suarez, Timothy L. Stewart, and Brian K. Hatchell. Report on the Power and Detector Stability Measurements for the QC Laser Alignment System. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/15010548.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rash, Clarence E., Jessica A. Stelle, and Thomase H. Harding. Power Measurements for Microvision, Inc., Aircrew Integrated Helmet System Scanning Laser Helmet-Mounted Display. Defense Technical Information Center, 2002. http://dx.doi.org/10.21236/ada410457.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hebner, R. E. Development of power system measurements -- quarterly report July 1, 1984 to September 30, 1984. National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hebner, R. E. Development of power system measurements -- quarterly report April 1, 1984 to June 30, 1984. National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marwick, P. Western Area Power Administration combined power system financial statements September 30, 1994 and 1993 and management overview and performance measurements. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/30282.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Butterweck, Gernot, Alberto Stabilini, Benno Bucher, et al. Aeroradiometric measurements in the framework of the swiss exercise ARM23. Paul Scherrer Institute, PSI, 2024. http://dx.doi.org/10.55402/psi:60054.

Full text
Abstract:
The flights of the civil (ARM23c) and military (ARM23m) parts of the exercise were performedbetween June 19th and 23rd and between September 11th and September 15th,respectively. The measuring system RLL001 was employed for all measurements. As usual, during the civil exercise the environs of some of the Swiss nuclear power plants were screened, on behalf of the Swiss Nuclear Safety Inspectorate (ENSI). At the site of the nuclear power plant Gösgen (KKG) with its pressurized water reactor, the activation products of the primary coolant loop are kept in the well shielded reactor building, thus
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Power system measurements' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography