Log in

Relevant bibliographies by topics / Power systems automation

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Power systems automation'

Author: Grafiati

Published: 10 January 2023

Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Power systems automation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Power systems automation"

1

Mikhailov, M. N., M. I. Rozhdestvenskii, and S. G. Ukharov. "Automation of nuclear power systems." Atomic Energy 103, no. 1 (July 2007): 553–59. http://dx.doi.org/10.1007/s10512-007-0088-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Zhang, Xue Ping, Huan Zou, Yan Xin Yang, and Nan Hui Zhang. "Automation of Power Systems Based on FACTS Controller." Applied Mechanics and Materials 203 (October 2012): 216–20. http://dx.doi.org/10.4028/www.scientific.net/amm.203.216.

Full text

Abstract:

This paper firstly introduced the power system and its significance of automation, and then introduced the power system automation classification and performance, describe function and influence of FACTS controller in the power system automation, Parallel type FACTS device, series type FACTS device, mixed type FACTS device, has great development potential in the future. In the related field has a strong reference value.

APA, Harvard, Vancouver, ISO, and other styles

3

Naidu, Hari Kumar, and K. Thanushkodi. "Recent trends in SCADA Power Distribution Automation Systems." Bangladesh Journal of Scientific and Industrial Research 45, no. 3 (November 25, 2010): 205–18. http://dx.doi.org/10.3329/bjsir.v45i3.1531.

Full text

Abstract:

The objective of the study in this paper is to evaluate the advances in telecommunication, Information Technology and networking which offer SCADA Power supply Distribution automation as a solution to improve power distribution efficiencies. This paper also discusses the result of the indigenously developed prototype hardware and software model utilising the latest embedded technology innovation for SCADA Power Distribution Automation Systems for reliable performance of power system. Keywords: SCADA; Distribution management system; GIS, Distribution automation; Embedded system. DOI: 10.3329/bjsir.v45i3.1531Bangladesh J. Sci. Ind. Res. 45(3), 205-218, 2010

APA, Harvard, Vancouver, ISO, and other styles

4

Pau, Marco, and Paolo Attilio Pegoraro. "Monitoring and Automation of Complex Power Systems." Energies 15, no. 8 (April 18, 2022): 2949. http://dx.doi.org/10.3390/en15082949.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Butler-Purry, Karen L., and N. D. R. Sarma. "Geographical Information Systems for Automation of Shipboard Power Systems." Naval Engineers Journal 118, no. 1 (January 2006): 63–75. http://dx.doi.org/10.1111/j.1559-3584.2006.tb00410.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Koshcheev, Lev, Andrei Lisitsyn, and Evgeniy Popkov. "Structure of emergency automatics in UPS of Russian Federation." MATEC Web of Conferences 245 (2018): 07010. http://dx.doi.org/10.1051/matecconf/201824507010.

Full text

Abstract:

There are emergency automatics systems (EA) widely used in Unified Power System (UPS) of Russian Federation. Main focus of article is centered on design principles of preventive automatics for stability control schemes (PASCS) as this automatics is the most complex type of EA. Features of PASCS are determined by modern state-of-the-art of digital technique and information technology, that decide the innovative developmental character of PASCS. Information about development and implementation of centralized emergency automation systems (CEAS) in power systems of Russian Federation is also given here.

APA, Harvard, Vancouver, ISO, and other styles

7

Weeks, D. J., and S. A. Starks. "Advanced automation approaches for space power systems." IEEE Computer Applications in Power 2, no. 4 (October 1989): 13–16. http://dx.doi.org/10.1109/67.39143.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Zivi, Edwin. "Design of robust shipboard power automation systems." IFAC Proceedings Volumes 37, no. 10 (July 2004): 53–64. http://dx.doi.org/10.1016/s1474-6670(17)31708-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Zivi, Edwin. "Design of robust shipboard power automation systems." Annual Reviews in Control 29, no. 2 (January 2005): 261–72. http://dx.doi.org/10.1016/j.arcontrol.2005.08.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Zhou, Zhen Zhen, Xiang Yu Chen, and Meng Sun. "Research on System Integration Technology for Operation & Maintenance Automation System of CSG EHV Power Transmission Company." Applied Mechanics and Materials 644-650 (September 2014): 3605–9. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.3605.

Full text

Abstract:

The development of Operation &Maintenance Automation System of CSG EHV Power Transmission Company needs to integrate some automation systems being in use, in order to build effective connections among different data and business process. This paper introduced several system integration technologies, and analyzed the applicability of these technologies referring to the automation systems used in power Grid Company, and proposed system integration solutions for typical automation systems in details.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Power systems automation"

1

Buse, Jonathan. "Development of SoC-based embedded systems for power system automation." Thesis, University of Liverpool, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.539495.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Guignard, Thibaut Xavier. "Implementation of a stable power assist device." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/17059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Schmitt, Andreas Joachim. "Digital Implementation of Power System Metering and Protection." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/51194.

Full text

Abstract:

An entirely digital system is presented which has several benefits as compared to the systems that are deployed currently. Utilizing digital capabilities to a much greater extent than is currently used within the power system allows for various improvements upon the current system. One such improvement is the ease of configuring and using the system. Each device can easily alter its functionality through a user interface, and the addition of devices is as easy as plugging it in. Additionally, the burden on the transformer due to the increase in the number of devices is nullified. The information remains accurate and unchanged, even when new devices are added to the system. The entire system conforms to the IEC 61850 standard, such that it adheres to the requirements of the actual power system.
Master of Science

APA, Harvard, Vancouver, ISO, and other styles

4

Osborn, Christopher Eric. "Protection, Automation, and Frequency Stability Analysis of a Laboratory Microgrid System." DigitalCommons@CalPoly, 2018. https://digitalcommons.calpoly.edu/theses/1828.

Full text

Abstract:

Due to increasing changes in the power industry, Cal Poly San Luis Obispo's electrical engineering department introduced a set of initiatives to adequately equip students with the skills and knowledge to interact with new technologies. Specifically, the department proposed a microgrid and power systems protection and automation laboratory to strengthen students' knowledge of microprocessor-based relays. This paper outlines a microgrid laboratory system that fulfills the initiative's goal and proposes a collection of laboratory experiments for inclusion in a new laboratory course at Cal Poly. The experiments provide students with practical experience using Schweitzer Engineering Laboratory (SEL) relays and teach fundamental concepts in semi-automated generator synchronization and power system data acquisition. The microgrid laboratory system utilizes SEL relays and a centralized SEL controller to automate frequency regulation through load shedding, power factor correction, generator and utility synchronization, and relay protection group switching.

APA, Harvard, Vancouver, ISO, and other styles

5

Cho, Bo Hyung. "Modeling and analysis of spacecraft power systems." Diss., Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/54741.

Full text

Abstract:

A comprehensive large-scale power system modeling is developed to facilitate the design and analysis of present and future spacecraft power systems. A two-port coupling method is utilized to provide a modularity in model building and analysis of the system. The modular approach allows the model to be flexible, verifiable and computationally efficient. A methodology for the system level analysis is presented with the ability to focus on the performance characteristics of an arbitrary component or subsystem. The system performance parameters are derived explicitly in terms of the two-port hybrid g-parameter representation of the component or subsystem, and impedances of its terminating subsystems. From this, the stability of the system is analytically determined and the subsystem interaction criteria is observed. Also presented is a model development from the empirical data employing the complex curve fitting technique. The technique is especially powerful for large scale system modeling and analysis where certain components and subsystems are viewed as black boxes with measurable terminal characteristics. The technique can also be used to realize a reduced order model of a complex subsystem. The Direct Energy Transfer (DET) spacecraft power system is modeled to demonstrate the versatility of the comprehensive system model by performing various DC, small-signal and large-signal analyses. Of particular interest is the analysis of the large-signal behavior of the nonlinear solar array system by employing the state-plane method. The analysis of the solar array system operation focused on the transition mode between the shunt mode and the battery discharging mode is presented. The subsystem interaction problems in the local component and global system are illustrated. A methodology for the design and trouble-shooting of a system dealing with the interaction problems using the g-parameters is described. Finally, a system level analysis of the DET system using an empirical data modeling technique is performed.
Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

6

Roe, Curtis Aaron. "Impacts of automated residential energy management technology on primary energy source utilization." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45865.

Full text

Abstract:

The objective of the proposed research is to analyze automated residential energy management technology using primary energy source utilization. A residential energy management system (REMS) is an amalgamation of hardware and software that performs residential energy usage monitoring, planning, and control. Primary energy source utilization quantifies power system levels impacts on power generation cost, fuel utilization, and environmental air pollution; based on power system generating constraints and electric load. Automated residential energy management technology performance is quantified through a physically-based REMS simulation. This simulation includes individual appliance operation and accounts for consumer behavior by stochastically varying appliance usage and repeating multiple simulation iterations for each simulated scenario. The effect of the automated REMS under varying levels of control will be considered. Aggregate REMS power system impacts are quantified using primary energy source utilization. This analysis uses a probabilistic economic dispatch algorithm. The economic dispatch algorithm quantifies: fuel usage and subsequent environmental air pollution (EAP) generated; based on power system generating constraints and electric load (no transmission constraints are considered). The analysis will comprehensively explore multiple residential energy management options to achieve demand response. The physically-based REMS simulation will consider the following control options: programmable thermostat, direct load control, smart appliance scheduling, and smart appliance scheduling with a stationary battery. The ability to compare multiple automated residential energy management technology options on an equal basis will guide utility technology investment strategies.

APA, Harvard, Vancouver, ISO, and other styles

7

Bhatnagar, Rahul. "Dynamic dispatch of direct load control." Diss., Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/54736.

Full text

Abstract:

Direct Load Control (DLC) -- the direct control of customer loads by an electric utility for the economic and reliable operation of the power system, is an important and active element of Load Management (LM). Currently attention has focussed on the integration of DLC into system operations. However, as yet, DLC is regarded as a discretionary resource to be used by the system operator based on informed judgment. The integration process has therefore, concentrated on improving the informational inputs to the operator. This dissertation extends the integration from that of a discretionary resource to a dispatchable system resource. The concept of the dynamic dispatch of DLC is formulated and defined to be an online evaluation and utilization of DLC for optimum benefit to the utility, as system conditions change. The concept envisages the use of DLC in an automated mode and coordinated with other system resources for optimum benefit. An important and integral part of the research effort is the development of a cost characterization of DLC. A closed form solution, using a dynamic programming framework, has been developed to estimate the costs of DLC dispatch. The derivation takes into account all operational constraints on the utilization of DLC -- payback characteristics, maximum on-times and minimum recovery times. The cost, defined as the difference in the fuel costs with and without DLC dispatch, were found to be dependent on the cost characteristics of the online generators and the load shape impacts of DLC dispatch. The dynamic dispatch concept is concretized by a power system operations model which incorporates DLC dispatch for fuel cost minimization and peak load shaving. The two modes are toggled by the dispatch algorithm as system conditions change. Results from the model are presented for several combinations of system conditions and DLC system parameters.
Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

8

O'Cull, Douglas C. "A COMPACT, LIGHTWEIGHT, LOW POWER, MULTI-FUNCTION TELEMETRY RECEIVER/COMBINER SYSTEM PROVIDES "HANDS OFF" AUTOMATION FOR SYSTEMS COST REDUCTION." International Foundation for Telemetering, 1994. http://hdl.handle.net/10150/608841.

Full text

Abstract:

International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California
With the increased concerns for reducing cost and improving reliability in today's telemetry systems, many users are employing simulation and automation to guarantee reliable telemetry systems operation. This places an increased demand on the remote capabilities of the equipment used in the telemetry system. Furthermore, emphasis has been placed on the ability to decrease the space and power consumption of the telemetry system to facilitate transportability of the a single telemetry system to multiple sites. Finally, today's telemetry systems demand that all equipment provide multiple functions to provide the maximum performance for the lowest system cost.

APA, Harvard, Vancouver, ISO, and other styles

9

畢天姝 and Tianshu Bi. "Distributed intelligent system for on-line fault section estimation oflarge-scale power networks." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2002. http://hub.hku.hk/bib/B42576714.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fehr, Ralph E. "An integrated optimal design method for utility power distribution systems." [Tampa, Fla.] : University of South Florida, 2005. http://purl.fcla.edu/fcla/etd/SFE0001356.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Power systems automation"

1

Aktiengesellschaft, Siemens. Power engineering & automation. Berlin: Siemens Aktiengesellschaft, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Krivykh, Irina V., Leonid Yu Kostyuk, and Victor V. Snezhko. Power systems document automation program IndorInfo/Power: Getting started. Tomsk: Tomsk state university, 2008. http://dx.doi.org/10.17273/book.2008.5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wilson, Robert, 1951 Sept. 29-, ed. Control and automation of electric power distribution systems. Boca Raton: Taylor & Francis, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Substation automation systems: Design and implementation. Chichester, West Sussex, United Kingdom: John Wiley & Sons, Ltd, 2016.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Goremykin, Sergey. Relay protection and automation of electric power systems. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1048841.

Full text

Abstract:

The textbook describes the main issues of the theory of relay protection and automation of electric power systems. The structure and functional purpose of protection devices and automation of power transmission lines of various configurations, synchronous generators, power transformers, electric motors and individual electrical installations are considered. For each of the types of protection of the above objects, the structure, the principle of operation, the order of selection of settings are given, the advantages and disadvantages are evaluated, indicating the scope of application. The manual includes material on complete devices based on semiconductor and microprocessor element bases. The progressive use of such devices (protection of the third and fourth generations) is appropriate and effective due to their significant advantages. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students in the areas of training 13.03.02 "Electric power and electrical engineering" (profile "Power supply", discipline "Relay protection and automation of electric power systems") and 35.03.06 "Agroengineering" (profile "Power supply and electrical equipment of agricultural enterprises", discipline "Relay protection of electrical equipment of agricultural objects"), as well as for graduate students and specialists engaged in the field of electrification and automation of industrial and agrotechnical objects.

APA, Harvard, Vancouver, ISO, and other styles

6

A, Gnadt P., Lawler J. S, and Whitfield E. W, eds. Automating electric utility distribution systems: The Athens Automation and Control Experiment. Englewood Cliffs, N.J: Prentice Hall, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Momoh, James A. Electric power distribution, automation, protection, and control. Boca Raton: CRC Press, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

E, Mariani. Control of modern integrated power systems. London: Springer, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

(Firm), ALSTOM. Network protection & automation guide: Protective relays, measurement & control. [England?]: Alstom Grid, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Power system control technology. Englewood Cliffs: Prentice-Hall, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Power systems automation"

1

Raja, J., P. Ajay-D-Vimal Raj, and S. Rajasekar. "Best Practices in Distribution Engineering and Automation." In Power Systems, 165–80. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-2972-1_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Salas-Cabrera, Rubén, Oscar Martínez-Hernández, Julio C. Rosas-Caro, Jonathan C. Mayo-Maldonado, E. Nacú Salas-Cabrera, Aaron González-Rodríguez, Hermenegildo Cisneros-Villegas, Rafael Castillo-Gutierrez, Gregorio Hernández-Palmer, and Rodolfo Castillo-Ibarra. "Parametric Identification of a Power-System Emulator." In Intelligent Automation and Systems Engineering, 79–92. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0373-9_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Popov, Vladimir, Vadim Tkachenko, Olena Yarmoliuk, and Dmytro Yatsenko. "Actual Trends of Electrical Distribution Systems Automation." In Power Systems Research and Operation, 319–46. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-17554-1_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Nie, Wei, Ying Wu, and Dabin Hu. "Research of Automatic Scoring System of Ship Power Automation System." In Advances in Intelligent Systems and Computing, 615–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-54927-4_58.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Rakhi Kumari, Prerna, and Chitrangada Roy. "Modelling of UPFC (Unified Power Flow Control) to Improve Stability of Power System by Real and Reactive Power Control of Transmission Line." In Advances in Systems, Control and Automation, 647–55. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4762-6_62.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Merdan, Munir, Alexander Prostejovsky, Ingo Hegny, Wilfried Lepuschitz, Filip Andrén, and Thomas Strasser. "Power Distribution Control Using Multi-Agent Systems." In Recent Advances in Robotics and Automation, 323–33. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-37387-9_25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ameli, Mohammad Taghi, Saeid Moslehpour, and Ziba Farzadpour. "Dispatching of Active Power Reserve for Higher Reliability of Restructured Power Systems." In Technological Developments in Education and Automation, 499–504. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-3656-8_90.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Yijun, Chen. "Electrical Automation Technology in the Thermal Power." In Advances in Intelligent Systems and Computing, 719–24. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-33030-8_117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Tavira-Mondragón, José, Rogelio Martínez-Ramírez, Fernando Jiménez-Fraustro, Roni Orozco-Martínez, and Rafael Cruz-Cruz. "A Standalone System to Train and Evaluate Operators of Power Plants." In Intelligent Automation and Systems Engineering, 107–19. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0373-9_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Mahajan, S. B., Arjun H. Kardile, Shital M. Mule, Ravindra M. Nagarale, and P. Sanjeevikumar. "Advanced Variable Structure Control for Distributed Power Generation." In Advances in Systems, Control and Automation, 337–45. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4762-6_32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Power systems automation"

1

Gorrell, Ernie, James Niemira, and Eli Nelson. "Distribution automation helps revitalize community." In 2009 Power Systems Conference (PSC). IEEE, 2009. http://dx.doi.org/10.1109/psamp.2009.5262331.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fan, Jiyuan, and Xiaoling Zhang. "Feeder Automation within the Scope of Substation Automation." In 2006 IEEE PES Power Systems Conference and Exposition. IEEE, 2006. http://dx.doi.org/10.1109/psce.2006.296386.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Balakrishna, P., K. Rajagopal, and K. S. Swarup. "Analysis on AMI system requirements for effective convergence of distribution automation and AMI systems." In 2014 6th IEEE Power India International Conference (PIICON). IEEE, 2014. http://dx.doi.org/10.1109/poweri.2014.7117764.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ekel, Ansuj, Schinzinger, Prakhovnik, and Razumovsky. "Automation of reactive power compensation in industrial power systems." In Proceedings of IEEE International Conference on Control and Applications CCA-94. IEEE, 1994. http://dx.doi.org/10.1109/cca.1994.381437.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Pintea, A., D. Popescu, and P. Borne. "Robust control for wind power systems." In Automation (MED 2010). IEEE, 2010. http://dx.doi.org/10.1109/med.2010.5547647.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Newman, T. "System automation in power distribution." In IEE North Eastern Centre Power Section Symposium on the Reliability, Security and Power Quality of Distribution Systems. IEE, 1995. http://dx.doi.org/10.1049/ic:19950457.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Greer, Richard, Will Allen, Jim Schnegg, and Andrew Dulmage. "Distribution automation systems with advanced features." In 2011 IEEE Rural Electric Power Conference (REPC). IEEE, 2011. http://dx.doi.org/10.1109/repcon.2011.5756721.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kirkman, Robert. "Development in Substation Automation Systems." In 2007 International Conference on Intelligent Systems Applications to Power Systems. IEEE, 2007. http://dx.doi.org/10.1109/isap.2007.4441690.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Al-Khannak, R., and B. Bitzer. "Grid Computing for Power and Automation Systems Implementations." In 41st International Universities Power Engineering. IEEE, 2006. http://dx.doi.org/10.1109/upec.2006.367773.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Calofir, Vasile, Ioana Fagarasan, Nicoleta Arghira, Mircea Stefan Simoiu, Grigore Stamatescu, Cristina Nichiforov, and Sergiu Stelian Iliescu. "Simulator for Automation and Control Systems in a Power System." In 2019 22nd International Conference on Control Systems and Computer Science (CSCS). IEEE, 2019. http://dx.doi.org/10.1109/cscs.2019.00066.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Power systems automation"

1

Ulsh, M., D. Wheeler, and P. Protopappas. Assessment of the Current Level of Automation in the Manufacture of Fuel Cell Systems for Combined Heat and Power Applications. Office of Scientific and Technical Information (OSTI), August 2011. http://dx.doi.org/10.2172/1023099.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Schock, Alfred. Design of Isotope Heat Source for Automatic Modular Dispersal During Reentry, and Its Integration with Heat Exchangers of 6-kWe Dynamic Isotope Power System. Office of Scientific and Technical Information (OSTI), January 1989. http://dx.doi.org/10.2172/1033407.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!