Relevant bibliographies by topics / Prefabrication Technology

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Prefabrication Technology'

Author: Grafiati
Published: 7 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Prefabrication Technology.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Prefabrication Technology"

1

Liu, Shaoshan, Yi Chen, Pingping Mao, et al. "Investigation of Key Technologies and Applications of Factory Prefabrication of Oil and Gas Station Pipeline." Processes 13, no. 6 (2025): 1890. https://doi.org/10.3390/pr13061890.

Full text
Abstract:
As key nodes in the energy transmission network, oil and gas pipeline stations are crucial in ensuring national energy security and stable economic development. The traditional construction mode of “on-site prefabrication and installation” has problems, such as low efficiency, high cost, and large quality fluctuations, which make it difficult to meet current construction needs. Factory prefabrication technology for pipelines has become a key path to solving industry pain points. This article focuses on the factory prefabrication technology of oil and gas station pipelines. By integrating key t
APA, Harvard, Vancouver, ISO, and other styles
2

OLOTO, ENITAN NGOZI, and ANTHONY C. IWEKA. "PRIVATE DEVELOPERS’ PERCEIVED USEFULNESS OF THE PREFABRICATION TECHNOLOGY IN NIGERIA’S HOUSING DEVELOPMENT INDUSTRY." Kufa Journal of Engineering 13, no. 4 (2022): 25–38. http://dx.doi.org/10.30572/2018/kje/130403.

Full text
Abstract:
Private developers in Nigeria’s housing development industry still face challenges of increasing housing stock, with a current housing deficit of 20 million units. Prefabrication, a known, yet unpopular housing construction method, has witnessed low usage. The effect of system characteristics on user acceptance of prefabrication technology is examined through the Perceived Usefulness (PU), of prefabrication system amongst private developers in the Nigerian housing development. The paper draws on the technology acceptance model (TAM) as the basis for investigation. A quantitative research appro
APA, Harvard, Vancouver, ISO, and other styles
3

Girma, Sisay, Jifara Chimdi, and Alemu Mosisa. "CHALLENGES OF USING PREFABRICATION TECHNOLOGY IN OROMIA REGIONAL STATE." Journal of Civil Engineering, Science and Technology 11, no. 1 (2020): 22–27. http://dx.doi.org/10.33736/jcest.2020.2020.

Full text
Abstract:
The prefabricated construction method is the most practical and effective construction in the industry today in the world. It is widely considered a sustainable approach to the construction industry. However, in Ethiopia, particularly in Oromia it is not further growing where the construction method is a conventional method. The main aim of this research was to investigate the challenges of using prefabrication technology in Oromia Regional State. The results of this data show that the challenges of using prefabrication technology in Oromia Regional State mainly depends on factors such as Lack
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Xiuren, and Fang Lin. "Prefabrication technology for underground metro station structure." Tunnelling and Underground Space Technology 108 (February 2021): 103717. http://dx.doi.org/10.1016/j.tust.2020.103717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, M., C. C. Wang, S. Sepasgozar, and S. Zlatanova. "Building Information Modelling Implementation in the Design Stage of Chinese Prefabrication Construction." IOP Conference Series: Earth and Environmental Science 1101, no. 9 (2022): 092017. http://dx.doi.org/10.1088/1755-1315/1101/9/092017.

Full text
Abstract:
Abstract Prefabrication construction has gained popularity in the construction industry during the last few years. Due to the complexity of prefabrication design, building information modelling (BIM) is adopted in the design stage to improve efficiency and accuracy. Many previous studies have examined the adoption of BIM in the design stage and explored the current practice of BIM adoption in prefabrication construction, however fewer first-hand investigations are made on assessing the adoption of BIM. This study aims to identify the opportunities and challenges of utilizing BIM technology in
APA, Harvard, Vancouver, ISO, and other styles
6

Hassan, Ali, Md Atowar Rahman Prodhan, Muhammad Asif, Fazal E. Ahad, Shakeel Ahmad, and Mst Julia Akter. "Prefabrication in Pakistan: Navigating Barriers for a Sustainable Construction Future." European Journal of Applied Science, Engineering and Technology 2, no. 6 (2024): 142–52. https://doi.org/10.59324/ejaset.2024.2(6).13.

Full text
Abstract:
Pakistan's construction industry faces significant challenges like inefficiency, high costs, project delays, and environmental concerns due to dependability on traditional construction approaches. This research explores the adaptation of prefabrication technology in Pakistan's construction industry to help overcome some of these problems. The study employs mixed methods to investigate factors affecting prefabrication acceptance, perceived benefits, and adoption barriers. Results indicate that although prefabrication presents benefits such as lower construction duration, cost savings, and great
APA, Harvard, Vancouver, ISO, and other styles
7

Hassan, Ali, Md Atowar Rahman Prodhan, Muhammad Asif, Fazal E. Ahad, Shakeel Ahmad, and Mst Julia Akter. "Prefabrication in Pakistan: Navigating Barriers for a Sustainable Construction Future." European Journal of Applied Science, Engineering and Technology 2, no. 6 (2024): 142–52. https://doi.org/10.59324/ejaset.2024.2(6).13.

Full text
Abstract:
Pakistan's construction industry faces significant challenges like inefficiency, high costs, project delays, and environmental concerns due to dependability on traditional construction approaches. This research explores the adaptation of prefabrication technology in Pakistan's construction industry to help overcome some of these problems. The study employs mixed methods to investigate factors affecting prefabrication acceptance, perceived benefits, and adoption barriers. Results indicate that although prefabrication presents benefits such as lower construction duration, cost savings, and great
APA, Harvard, Vancouver, ISO, and other styles
8

Baek, Seungchan, Jongsung Won, and Sejun Jang. "Economic Integrated Structural Framing for BIM-Based Prefabricated Mechanical, Electrical, and Plumbing Racks." Applied Sciences 13, no. 6 (2023): 3677. http://dx.doi.org/10.3390/app13063677.

Full text
Abstract:
Prefabrication, one of the methods to increase productivity by moving construction activity to factory work, has evolved into multi-trade prefabrication. Although previous studies have introduced the merits and directions of multi-trade prefabrication technology, various design and installation techniques must be developed for the economical application of multi-trade prefabrication. This study aims to provide an economical design for prefabricated mechanical, electrical, and plumbing (MEP) rack (PMR) structural framing. We proposed five types of PMR structural framing techniques and analyzed
APA, Harvard, Vancouver, ISO, and other styles
9

Mr. Mithil Bokefode, Mr Mithil Bokefode, and Dr A. F. Shaikh Dr. A. F. Shaikh. "Impact Prefabrication Technology (Pre Engineering) and Equipments on Profitability in Construction Industry: A Review." Journal of Advances in Science and Technology 20, no. 1 (2024): 30–34. http://dx.doi.org/10.29070/fw86gm70.

Full text
Abstract:
The strength, predetermined thermal properties, dynamic stability, and immutability of thegeometric dimensions of the prefabricated elements are provided by prefabricated buildings andstructures that are mounted from uniform prefabricated three-dimensional units under challenging andunique circumstances. Regarding its effect on environmental preservation, prefabrication has long beenrecognised as a sustainable building technique. Prefabrication's impact on reducing construction wasteand the accompanying waste handling processes, such as waste sorting, reuse, recycling, and disposal,are essenti
APA, Harvard, Vancouver, ISO, and other styles
10

Chea, Cheav Por, Yu Bai, Xuebei Pan, Mehrdad Arashpour, and Yunpeng Xie. "An integrated review of automation and robotic technologies for structural prefabrication and construction." Transportation Safety and Environment 2, no. 2 (2020): 81–96. http://dx.doi.org/10.1093/tse/tdaa007.

Full text
Abstract:
Abstract Building construction has developed from the use of primitive tools to that of machinery, with a tendency toward automation. Automation of processes and robotics can improve efficiency, accuracy and safety in construction. On the other hand, structural prefabrication for construction is increasingly being adopted worldwide to enhance productivity and to alleviate the environmental impact of conventional construction processes. The combination and application of automation and prefabrication technologies may therefore introduce new developments to the construction industry. This paper
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Prefabrication Technology"

1

Bengtsson, Pär, and Johan Wallin. "Analysis of a Prefabricated Concrete Skew Angle Slab Bridge." Thesis, Linnéuniversitetet, Institutionen för byggteknik (BY), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-81146.

Full text
Abstract:
Prefabricated concrete elements are widely used in the construction industry today. With advantages such as time savings, increased safety at the construction site and minimized material usage, prefab becomes a major challenger to the traditional on-site casting construction method. However, constructing a bridge in concrete still presents challenges when using prefab as a construction method. Hence, more research in the area is needed. This master thesis has been studying the behavior of a prefabricated skew angle slab and the connection between the slab and wall elements of a bridge. The stu
APA, Harvard, Vancouver, ISO, and other styles
2

Carvalho, Neto Manoel Balbino. "Pré-fabricação: arquitetura ou construção ?" Universidade Federal de Goiás, 2016. http://repositorio.bc.ufg.br/tede/handle/tede/6913.

Full text
Abstract:
Submitted by Luciana Ferreira (lucgeral@gmail.com) on 2017-03-08T10:50:58Z No. of bitstreams: 2 Dissertação - Manoel Balbino Carvalho Neto - 2016.pdf: 10073077 bytes, checksum: 689d12fd975fd4e4d4e1ea93c789f871 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)<br>Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2017-03-08T10:53:48Z (GMT) No. of bitstreams: 2 Dissertação - Manoel Balbino Carvalho Neto - 2016.pdf: 10073077 bytes, checksum: 689d12fd975fd4e4d4e1ea93c789f871 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (
APA, Harvard, Vancouver, ISO, and other styles
3

Rådberg, Adam, and Albin Aronsson. "Småhustillverkarens projektering med BIM i jämförelse med 2D-teknik." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Byggnadsteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-36538.

Full text
Abstract:
Purpose: A fear of change has been in the Swedish construction industry. Errors and delays are seen as obstacles to development in the construction industry. Industrial construction means more automated manufacturing, which places higher demands on the design. The design stage is the bottleneck for industrial construction with 2D technology. BIM with its information management provides increased coordination, resulting in a number of improvements. The purpose of this thesis is to analyze how the design of small house manufacturers is transformed by a transition to BIM from 2D technology. Metho
APA, Harvard, Vancouver, ISO, and other styles
4

Mohsin, Nooraldeen, and Bawan Hardi. "Ytterväggar för nybyggnation av modulhus : Hur påverkar valet av yttervägg installation och kostnader för modulhus." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-36330.

Full text
Abstract:
This work aims at identifying and proposing four prefabricated exterior wall elements to a company that will build small prefabricated houses where the house elements are produced in a Micro factory. The four wall elements are as follows: Corner wall units, wall elements with no cut-out for windows and doors, wall elements with cut-out for a window and door and wall elements with cut-out for a door. In this report four different prefabricated outer wall elements have been proposed for small housing project. A comparison study has been made between three different wall solutions (Outer wall sol
APA, Harvard, Vancouver, ISO, and other styles
5

Camo, Kenan, and Anton Blickhammar. "Analys av transport i en klimatdeklaration : En fallstudie av prefabricerade småhus." Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-43485.

Full text
Abstract:
Sveriges riksdag har satt klimatmål om noll nettoutsläpp till år 2045. Bygg- och fastighetssektorn har de senaste åren stått för cirka en femtedel och transportsektorn står för en tredjedel av det totala utsläppet i Sverige. Klimatdeklarationer ska initieras för att nå riksdagens klimatmål. Klimatdeklaration av byggnader är indelat i produktskedet och byggproduktionsskedet. En del av byggproduktionsskedet är transport av resurser till byggarbetsplats. Det är idag möjligt att använda sig av generiska eller specifika värden för klimatberäkning av transport.  Problemet är att
APA, Harvard, Vancouver, ISO, and other styles
6

Cicek, David, and Jennifer Eklund. "Momentstyv anslutning mellan vägg och gavelspets i trämoduler." Thesis, Linnéuniversitetet, Institutionen för byggteknik (BY), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-88966.

Full text
Abstract:
Studien omfattar anslutningen mellan vägg och gavelspets i ett prefabriceratenplanshus i trä. Huset är uppbyggt av saxtakstolar och få innerväggar för attdärigenom erhålla en öppen planlösning. Det medför att stabiliserandebyggnadsdelar saknas och horisontella vindlaster ger då upphov till oacceptabeltstora utböjningsdeformationer på anslutningen. Syftet är att undersöka kapaciteten med avseende på moment, vindlast ochspännvidd i de befintliga lösningarna samt presentera en alternativ lösning somskulle kunna vara praktiskt tillämpbar. Utefter detta uppnås målet som är att lyftafram de parametr
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Prefabrication Technology"

1

Iuorio, Ornella. "Historical Evolution of Prefabrication." In SpringerBriefs in Applied Sciences and Technology. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-73327-7_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fernández-Ordóñez Hernández, David. "Early Developments of Concrete Prefabrication." In High Tech Concrete: Where Technology and Engineering Meet. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-59471-2_317.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Xu, Lin, Jing Yang, Zhe Li, et al. "Application of green low-carbon prefabrication technology in specific buildings." In Structural Seismic and Civil Engineering Research. CRC Press, 2023. http://dx.doi.org/10.1201/9781003384342-54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Xiang, Liang, Yin Xu, and Lele Chen. "Key Technology of Prefabrication Construction of Portal Pier Bent Caps with Large Cantilever." In Advances in Engineering Research. Atlantis Press International BV, 2024. http://dx.doi.org/10.2991/978-94-6463-514-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Xiuren, and Fang Lin. "Research and application of prefabrication and assembly construction technology for metro station structures." In Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World. CRC Press, 2023. http://dx.doi.org/10.1201/9781003348030-131.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shen, Huijun, Hehui Zheng, Fei Tian, and Hao Dai. "Segmental Prefabrication and Assembly Technology of Composite Box Girder with Corrugated Steel Webs." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5217-3_109.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Xiangsheng. "Development of an intelligent technology system for prefabrication and assembly of new ductile tunnel structures." In Advances in Frontier Research on Engineering Structures Volume 1. CRC Press, 2023. http://dx.doi.org/10.1201/9781003336631-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guaita, P., D. Fernández Ordóñez, R. Baur, E. Corres Sojo, B. Malchiodi, and S. Ekerman. "Advancing TRC-LC as a sustainable technology for light prefabrication in social housing in Latin America." In Structures and Architecture. CRC Press, 2025. https://doi.org/10.1201/9781003658641-64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Su, Yunsheng, Xihan Cheng, and Jiaxing Li. "Membrane-Based Modularization in Prefabrication System Design as a Strategy in Emergency Buildings." In Computational Design and Robotic Fabrication. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8405-3_35.

Full text
Abstract:
AbstractThis article is about the application of air film-based modular prefabrication system design strategy in emergency buildings. To determine the typical and essential behavior of membrane structures, this paper reviews and compares relevant theories, experiments, and simulations on architectural performance, mechanical properties of membrane materials, and membrane structure performance. In addition, this project tries to use the robotic arm spraying technology to study the strategy of trajectory generation. First, import the model shape into the software for multiple trajectory simulati
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Yu, Yun-xiu Sai, Lin-hao Qiu, and Guo-zhu Chen. "An Applied Research of Factory Prefabrication Techniques in the Overseas Oil and Gas Storage and Transportation Engineering Construction." In Proceedings of the 2022 International Petroleum and Petrochemical Technology Conference. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2649-7_43.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Prefabrication Technology"

1

Chen, Yuliang, Yidi Li, and Binyi Dai. "Application of ‘4+1+1' Short-line Precast Segmental Technology in Macau C390B." In IABSE Symposium, Tokyo 2025: Environmentally Friendly Technologies and Structures: Focusing on Sustainable Approaches. International Association for Bridge and Structural Engineering (IABSE), 2025. https://doi.org/10.2749/tokyo.2025.0645.

Full text
Abstract:
&lt;p&gt;Macau C390B-Seac Pai Van Line, as an urban rail, is located in a highly developed urban area (Macau, China), which has a very high demand for rapid construction, green environment, as well as smallest influence on traffic and residents. Under the background of Chinese strategic goal of ",dual carbon", and Chinese high-quality development, as well as a varied of challenges of the project, Accelerated Bridge Construction with two advanced and innovative technologies, the short-line precast segmental method and continuous rigid bridge frame systems without bearings, is assumed as the bes
APA, Harvard, Vancouver, ISO, and other styles
2

Rajić, Andrea, Ivan Lukačević, Ivan Curkovic, and Vlaho Žuvelek. "Numerical parametric study of LWT-FLOOR system: effect of various web openings." In IABSE Congress, San José 2024: Beyond Structural Engineering in a Changing World. International Association for Bridge and Structural Engineering (IABSE), 2024. https://doi.org/10.2749/sanjose.2024.0890.

Full text
Abstract:
&lt;p&gt;Except for the main advantage of the composite system, which is the high utilisation of applied materials, these structural systems are also known for reusability, high degree of prefabrication and long-span capability. This paper presents experimentally supported numerical research on the bending behaviour of LWT-FLOOR composite cold-formed steel-concrete beams where steel beam elements are connected using spot-welding technology and are connected to a concrete slab by innovative demountable shear connectors. To consider the functional requirements of the system, a parametric study o
APA, Harvard, Vancouver, ISO, and other styles
3

Rezgui, Yacine, Salima Hamini, and Abdelkader Ramdani. "Sustainable Renovation through Modular semantic prefabrication." In 2022 IEEE 28th International Conference on Engineering, Technology and Innovation (ICE/ITMC) & 31st International Association For Management of Technology (IAMOT) Joint Conference. IEEE, 2022. http://dx.doi.org/10.1109/ice/itmc-iamot55089.2022.10033157.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hiramoto, T., S. Okata, E. Kobayashi, Y. Nakano, A. Shiga, and S. Takizawa. "Computerized Prefabrication and Materials for the World's Tallest Platform, Bullwinkle." In Offshore Technology Conference. Offshore Technology Conference, 1989. http://dx.doi.org/10.4043/6094-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jiang, Long, Hang Ye, Chi Zhou, Shikui Chen, and Wenyao Xu. "Parametric Topology Optimization Toward Rational Design and Efficient Prefabrication for Additive Manufacturing." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2954.

Full text
Abstract:
The significant advance in the boosted fabrication speed and printing resolution of additive technology has considerably increased the capability of achieving product designs with high geometric complexity. The prefabrication computation has been increasingly important and is coming to be the bottleneck in the additive manufacturing process. In this paper, the authors devise an integrated computational framework by synthesizing the parametric level set-based topology optimization method with the DLP-based SLA process for intelligent design and additive manufacturing of not only single material
APA, Harvard, Vancouver, ISO, and other styles
6

Walusiak, Hubert. "TECHNOLOGY OF CONTROLLING A BEAM MADE OF POLYTECH MATERIAL USED IN THE BUILDING PREFABRICATION SYSTEM." In 19th SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings. STEF92 Technology, 2019. http://dx.doi.org/10.5593/sgem2019/6.2/s26.035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Beyreuther, Todd, and Darren Griechen. "Mass Timber Design Research at the Nexus of Practice and the Academy." In AIA/ACSA Intersections Conference. ACSA Press, 2015. http://dx.doi.org/10.35483/acsa.aia.inter.15.12.

Full text
Abstract:
Mass timber is an emergent building assembly technology that advances themes of prefabrication, modularization, parametric design, and renewable materials in architectural practice and education. Mass timber is a collective term for several engineered heavy panel wood products including cross-laminated timber (CLT), nail-laminated timber (NLT), glued laminated timber (GLT) laminated veneer lumber (LVL), laminated strand lumber (LSL), and parallel strand lumber (PSL).
APA, Harvard, Vancouver, ISO, and other styles
8

Sitek, Michał. "3D PRINTING AND CNC PREFABRICATION - DIDACTIC EXPERIENCE ARISING FROM THE TEACHING PROGRAM IN ARCHITECTURE AND INTERIOR DESIGN." In International Technology, Education and Development Conference. IATED, 2017. http://dx.doi.org/10.21125/inted.2017.0517.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ranathunga, J. D. R., C. Hadiwattege, and T. M. P. N. Thennakoon. "Augmenting performance of prefabricated MEP modular systems via BIM integration." In World Construction Symposium - 2024. Department of Building Economics, 2024. http://dx.doi.org/10.31705/wcs.2024.20.

Full text
Abstract:
Within the Architecture, Engineering, and Construction (AEC) sectors, prefabrication is an emerging technology which concerned with the construction production process and serves as a manufacturing platform to improve productivity and safety management. Whether they are located off-site or on-site, the coordination and fabrication of Mechanical, Electrical, and Plumbing (MEP) systems have consistently presented challenges. MEP designers lack the necessary expertise to create detailed models for prefabrication, but designers proposed enhancing collaboration with fabricators to develop installat
APA, Harvard, Vancouver, ISO, and other styles
10

Qiyu Shen and Feng Qiu. "Key process and difficulty analysis of pipe sections prefabrication of immersed tunnel and research on the solving measures." In 2011 International Conference on Electric Technology and Civil Engineering (ICETCE). IEEE, 2011. http://dx.doi.org/10.1109/icetce.2011.5776352.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Prefabrication Technology"

1

Patel, Yusef. File to Factory: A case study of automated prefabrication house-building methods for small-to-medium enterprises. Unitec ePress, 2017. http://dx.doi.org/10.34074/ocds.0823.

Full text
Abstract:
The Eco-Digital Fabrication (EDFAB) research project aimed to investigate how automated prefabrication technologies and off-the-shelf construction products can be employed to disrupt building industry norms. The aim of this research – conducted at the University of Auckland and Unitec Institute of Technology from 2014 onward – was to provide small-to-medium enterprises in the construction industry with a pathway to upskill and increase construction productivity through the use of these processes. The availability of automated machines and easy-to-use fabrication software is increasing dramatic
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Prefabrication Technology' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography