Log in

Relevant bibliographies by topics / Press fitting

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Press fitting'

Author: Grafiati

Published: 7 July 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Press fitting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Press fitting"

1

Nwe, Theingi, and Monsak Pimsarn. "Railway Axle and Wheel Assembly Press-Fitting Force Characteristics and Holding Torque Capacity." Applied Sciences 11, no. 19 (2021): 8862. http://dx.doi.org/10.3390/app11198862.

Full text

Abstract:

Nowadays, press-fitting is widely used in the manufacturing industry because it allows easy and fast installation and is repetitive, strong, and inherently reliable. The quality of a press-fitting assembly can be verified from the press-fitting curves and forced monitoring. This study aims to investigate the characteristics of the press-fitting curve with various interference railway wheelset models and determine the interference limit that axles can withstand at the maximum holding torque without slipping and without plastic deformation. A three-dimensional finite element analysis examined th

APA, Harvard, Vancouver, ISO, and other styles

2

Saito, Ryoichi, Nao-Aki Noda, Yoshikazu Sano, Arata Miyagi, and Tomoaki Okamura. "Fatigue strength improvement of roller chain by press fitting between pin and plate." International Journal of Modern Physics B 35, no. 14n16 (2021): 2140024. http://dx.doi.org/10.1142/s0217979221400245.

Full text

Abstract:

To improve the fatigue strength of the roller chain, the fatigue test is conducted by varying the press-fitting ratio between the pin and the holed plate. To model what occurs in a chain under load, a single plate specimen is prepared by press-fitting two pins into two holes at the ends of the plate. The FEM analysis is performed to obtain the stress amplitude and the average stress. The results, in both cases demonstrate that the fatigue strength is improved by the press-fit between the pin and the hole. The fatigue improvement mechanism is discussed based on the stress analysis.

APA, Harvard, Vancouver, ISO, and other styles

3

Nwe, Theingi, and Monsak Pimsarn. "Deterministic Stress Intensity Factor of a Railway Axle under Adverse Running Condition." Materials Science Forum 1109 (December 14, 2023): 165–71. http://dx.doi.org/10.4028/p-k75d6r.

Full text

Abstract:

Although railway axles are a crucial part of railway vehicles, they are susceptible to long-term failure because of repeated loads. The aim of this research is to investigate the stress intensity factor (SIF) of a surface elliptical crack on a high-speed railway axle under various operating conditions. The study employs numerical analysis to explore the impact of press-fitting, rotary bending, stable and adverse running conditions on the SIF solutions. The main findings demonstrate that adverse running conditions, such as the press-fitting force, asymmetric vehicle weight, lateral force and wh

APA, Harvard, Vancouver, ISO, and other styles

4

Olson, Jonas. "The Personal and the Fitting." Journal of Moral Philosophy 11, no. 3 (2014): 341–52. http://dx.doi.org/10.1163/17455243-01103001.

Full text

Abstract:

This paper is a critical notice of a recent significant contribution to the debate about fitting attitudes and value, namely Toni Rønnow-Rasmussen’s Personal Value (Oxford: Oxford University Press, 2011). In this book, Rønnow-Rasmussen seeks to analyse the notion of personal value—an instance of the notion of good for a person—in terms of fitting attitudes. The paper has three main themes: (i) Rønnow-Rasmussen’s discussion of general problems for fitting attitude analyses; (ii) his formulation of the fitting attitude analysis of personal value and the notion of ‘for someone’s sake (fss) attitu

APA, Harvard, Vancouver, ISO, and other styles

5

Cristofolini, L., C. Metti, and M. Viceconti. "Strain patterns induced by press-fitting and by an external load in hip arthroplasty: A photoelastic coating study on bone models." Journal of Strain Analysis for Engineering Design 38, no. 4 (2003): 289–301. http://dx.doi.org/10.1243/03093240360692887.

Full text

Abstract:

The success of prostheses is highly dependent upon load transfer and bone stresses. Reflection photoelasticity is a viable technique for measuring stress patterns in vitro. However, when a cementless stem is tested, the resultant stresses under load are the sum of the implantation stresses and of those induced by load application. Separating these two components is a critical issue that so far has not been thoroughly solved using photoelasticity. Implantation strains and strain under load were measured separately by a suitable procedure: the photoelastic coating was applied to the femur after

APA, Harvard, Vancouver, ISO, and other styles

6

YAMASHITA, Yoshihiro. "Alternative Press Fitting Using Laser for Automotive Components." Review of Laser Engineering 35, no. 12 (2007): 799–805. http://dx.doi.org/10.2184/lsj.35.799.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

SATO, Takashi, Daisuke MIZUSHIMA, Hiroya MURAKAMI, and Naoto OHTAKE. "Press Fitting and Mechanical Clinching by Ultrasonic Vibration." Journal of the Japan Society for Technology of Plasticity 53, no. 618 (2012): 611–15. http://dx.doi.org/10.9773/sosei.53.611.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kurniawan, Shiddiq, and Qomariyatus Sholihah. "ANALISIS KEANDALAN (RELIABILITY) PADA MESIN SCREW PRESS (STUDI KASUS : PT. PERKEBUNAN NUSANTARA XIII)." JTAM ROTARY 1, no. 1 (2019): 55. http://dx.doi.org/10.20527/jtam_rotary.v1i1.1403.

Full text

Abstract:

The machine is one of the main factors of production whose role is very important in order to produce a product that conforms to the specifications set by a machine, with the amount and capacity of the machine's production. Reliability is the design of a component so that components can work according to function, without any failure, in accordance with the process already set. Screw press is a fitting machine used to squeeze moss brondolan ripe with press system and used to separate crude oil from crushed flesh (mesocarp) by squeezing. Research done on Screw Press machine that its role is qui

APA, Harvard, Vancouver, ISO, and other styles

9

Culhane-Pera, Kathleen A. "Belonging: The Social Dynamics of Fitting In as Experienced by Hmong Refugees in Germany and Texas, by Faith G. Nibbs." Refuge: Canada's Journal on Refugees 31, no. 2 (2015): 98–100. http://dx.doi.org/10.25071/1920-7336.40315.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Massah, Jafar. "Charging dampers with pressurized gas via press fitting blockage." Acta Periodica Technologica, no. 00 (2025): 16. https://doi.org/10.2298/apt250501016m.

Full text

Abstract:

These shock absorbers have two separate phases that are separated by a plunger. The liquid phase is oil, and the gas phase is nitrogen. One of the most challenging steps in making these shock absorbers is injecting nitrogen gas. This research project aims to present the method of manufacturing and producing the gas spring aid more straightforwardly, which reduces the production time. In this method, the need for special welding devices is eliminated by eliminating the nitrogen gas injection hole welding method. In addition to the mentioned case, one of the advantages of this method is to elimi

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Press fitting"

1

Coban, Huseyin. "Assembly via press fitting knurled components in drivetrain applications." Thesis, Glasgow Caledonian University, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.518241.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Egüz, Izzettin Osman. "Hydraulic press construction for fitting the bearings to the housing." Thesis, Växjö University, School of Technology and Design, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-2125.

Full text

Abstract:

<p>This report was written as a result of a Bachelor Degree Project, together with Swepart Transmission AB. The report contains the construction of a hydraulic press for the assembly operation.</p><p>The project started with a new construction of a hydraulic press for the bearings’ assembly. The goal within the thesis work was to fit the three bearings to the housing by only one press motion. This operation should be very safety because of the sensitive tolerance at the bearings and housing. Construction of the cylinders, rams and bolster were the most important parts at this project because t

APA, Harvard, Vancouver, ISO, and other styles

3

Hendrycks, Baptiste. "Modélisation de l'assemblage roue/essieu ferroviaire et de sa tenue en fatigue sous chargement cyclique." Electronic Thesis or Diss., Université de Lille (2022-....), 2023. http://www.theses.fr/2023ULILN049.

Full text

Abstract:

Cette thèse a pour objectif de proposer des modèles numériques permettant une meilleure compréhension du comportement en fatigue de l'assemblage roue-essieu ferroviaires.Un premier modèle simule l'opération de calage des roues sur les portées de l'essieu. Pour sa réalisation, une attention particulière a été portée au comportement en friction entre la roue et l'essieu ce qui a notamment permis de montrer une dépendance du facteur de frottement à la pression de contact. Aussi, la simulation met en évidence la création d'une singularité géométrique en début d'opération ayant une influence sur la

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Press fitting"

1

Spazi Atti/fitting Spaces: 7 artisti italiani alle prese con la trasformazione dei luoghi/7 Italian Artists Grappling with The Transformation Of Places. 5 Continents, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Press fitting"

1

Tres, Paul A. "Press Fitting." In Designing Plastic Parts for Assembly. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.1007/978-1-56990-821-1_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tres, Paul A. "Press Fitting." In Designing Plastic Parts for Assembly. Carl Hanser Verlag GmbH & Co. KG, 2014. http://dx.doi.org/10.3139/9781569905562.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Tres, Paul A. "Press Fitting." In Designing Plastic Parts for Assembly. Carl Hanser Verlag GmbH & Co. KG, 2017. http://dx.doi.org/10.3139/9781569906699.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Tres, Paul A. "Press Fitting." In Designing Plastic Parts for Assembly, 9th ed. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.3139/9781569908211.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Laurenczy, Csaba, Damien Berlie, and Jacques Jacot. "Ultrasonic Press–Fitting: A New Assembly Technique." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45586-9_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Saad, Sofiane, Vincent Magnier, Philippe Dufrenoy, Eric Charkaluk, and Franc̨ois Demilly. "Numerical Chain of Forging Railway Axle and Wheel Press Fitting Operation." In Design and Modeling of Mechanical Systems - II. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17527-0_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Palic, Srecko, Nenad Petrovic, Nikola Palic, Strahinja Milenkovic, and Zivana Jovanovic Pesic. "Using Experimental Results to Determine Calculation Parameters for Press Fitting Ball Bearings into 3D Printed Parts." In Mechanisms and Machine Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-80512-7_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Han, Xiao, Cheng-Hsuan Yang, Yuxiang Chen, and Alejandra Hernandez Sanchez. "A Robotic Method to Insert Batt Insulation into Light-Frame Wood Wall for Panel Prefabrications." In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality. Firenze University Press, 2023. http://dx.doi.org/10.36253/10.36253/979-12-215-0289-3.58.

Full text

Abstract:

Currently, industrial robot arms are trending in prefabricated building construction; however, a notable gap exists in established automated processes and related research specifically for the insertion of batt thermal insulation. The current method for accomplishing this task relies on manual insertion, which is labour-intensive for the workers and poses long-term health and safety concerns. This research presents an ongoing research project aimed at developing a feasible robotic process for the automated insertion of batt thermal insulation into prefabricated light-frame wood wall frames. Th

APA, Harvard, Vancouver, ISO, and other styles

9

Han, Xiao, Cheng-Hsuan Yang, Yuxiang Chen, and Alejandra Hernandez Sanchez. "A Robotic Method to Insert Batt Insulation into Light-Frame Wood Wall for Panel Prefabrications." In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality. Firenze University Press, 2023. http://dx.doi.org/10.36253/979-12-215-0289-3.58.

Full text

Abstract:

Currently, industrial robot arms are trending in prefabricated building construction; however, a notable gap exists in established automated processes and related research specifically for the insertion of batt thermal insulation. The current method for accomplishing this task relies on manual insertion, which is labour-intensive for the workers and poses long-term health and safety concerns. This research presents an ongoing research project aimed at developing a feasible robotic process for the automated insertion of batt thermal insulation into prefabricated light-frame wood wall frames. Th

APA, Harvard, Vancouver, ISO, and other styles

10

"6 Press Fitting." In Designing Plastic Parts for Assembly, 10th ed. Carl Hanser Verlag GmbH & Co. KG, 2024. http://dx.doi.org/10.3139/9781569909393.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Press fitting"

1

Liu, Yapei, Zhijun Wang, Zhongxun Xu, Hao Zhang, Bo Zhang, and Yingqian Du. "550kV GIL Three-pillar Structure Press-fitting Process Simulation." In 2020 IEEE International Conference on High Voltage Engineering and Application (ICHVE). IEEE, 2020. http://dx.doi.org/10.1109/ichve49031.2020.9279655.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Nie, Xiangyang, Dongxing Chen, Langxi Yuan, and Fan Yang. "Design and analysis of automatic press fitting and detection system." In International Conference on Intelligent Manufacturing and Industrial Automation (CIMIA 2022), edited by Ayush Dogra, Xuexia Ye, and Parames Chutima. SPIE, 2022. http://dx.doi.org/10.1117/12.2640670.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sand, Christian, Moritz Meiners, Jonathan Eberle, and Jorg Franke. "Evaluation of energy measurements for error detection in press-fitting processes." In 2018 2nd International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS). IEEE, 2018. http://dx.doi.org/10.1109/sims.2018.8355294.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sharma, Ekansh, Christoph Henke, Alex Mitrevski, and Paul G. Plöger. "Adaptive Compliant Robot Control with Failure Recovery for Object Press-Fitting." In 2023 European Conference on Mobile Robots (ECMR). IEEE, 2023. http://dx.doi.org/10.1109/ecmr59166.2023.10256379.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Yamamoto, Kazuyuki, Yusaku Sakai, Hayato Yoshino, and Koji Masumoto. "Development of divided core motor production technique featuring assembly by press fitting." In 2012 2nd International Electric Drives Production Conference (EDPC). IEEE, 2012. http://dx.doi.org/10.1109/edpc.2012.6425116.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Lei, Jianzhong, Xinglong Zhao, Ke Wang, and Hongmei Liu. "Design and Application of Automatic Judgment System for Wheelset Press-Fitting Curve." In 2023 IEEE 11th Joint International Information Technology and Artificial Intelligence Conference (ITAIC). IEEE, 2023. http://dx.doi.org/10.1109/itaic58329.2023.10408959.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Jin, Y. M., Y. P. Zheng, Z. J. Zhu, and Y. S. Zhang. "Research of the Mechanical Performance After Galvanization of Innovative Multilayer Electric Power Fitting." In The 3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2016). WORLD SCIENTIFIC, 2017. http://dx.doi.org/10.1142/9789813207301_0013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Nwe, Theingi, and Monsak Pimsarn. "Numerical analysis of the influence of press-fitting on the fatigue life of railway axle." In THE 12TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (TSME-ICoME 2022). AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0206197.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Jin, Y. M., Z. J. Wang, and Y. S. Zhang. "Investigate of the Mechanical and Heat Transfer Performance of High Strength Steel Hot Stamping Power Fitting Products." In The 2nd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2015). WORLD SCIENTIFIC, 2016. http://dx.doi.org/10.1142/9789813140622_0085.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Viana, Felipe A. C., and Raphael T. Haftka. "Using Multiple Surrogates for Minimization of the RMS Error in Meta-Modeling." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49240.

Full text

Abstract:

Surrogate models are commonly used to replace expensive simulations of engineering problems. Frequently, a single surrogate is chosen based on past experience. Previous work has shown that fitting multiple surrogates and picking one based on cross-validation errors (PRESS in particular) is a good strategy, and that cross validation errors may also be used to create a weighted surrogate. In this paper, we discuss whether to use the best PRESS solution or a weighted surrogate when a single surrogate is needed. We propose the minimization of the integrated square error as a way to compute the wei

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Press fitting"

1

Fabricator killed by ruptured hydraulic press fitting. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2006. http://dx.doi.org/10.26616/nioshsface04or015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!