Relevant bibliographies by topics / Příďový podvozek

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Příďový podvozek'

Author: Grafiati
Published: 4 June 2021
Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Příďový podvozek.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Příďový podvozek"

1

Trojánek, Tomáš. "Návrh podvozku malého dvoumístného letounu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-377755.

Full text
Abstract:
The aim of this master thesis is modification of landing gear for accomplishment CS-23 regula-tion from that purpose, because landing gear in the use can't pass this type of certification. The first part examines the alternatives of landing gear with consideration optimal technical and eco-nomical difficulty. After finding optimal type of landing gear with shock absorber is there part of designing and computing the load. Last part of thesis is about stress analysis of whole con-cept and reconsidering final changes.
APA, Harvard, Vancouver, ISO, and other styles
2

Baláš, Martin. "Pevnostní kontrola a topologická optimalizace dílu podvozku letounu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417462.

Full text
Abstract:
This master thesis is about stress analysis of landing gear for accomplishment CS-23 regulation. The first part examines all alternatives of landing gear regarding for accomplishment of regulation. Next part is stress analysis of main and nose landing gear using FEM analysis in MSC Nastran software. Last part of master thesis describes topology optimization of two parts of landing gear.
APA, Harvard, Vancouver, ISO, and other styles
3

Novák, Josef. "Návrh podvozku VUT200 TwinCobra." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232017.

Full text
Abstract:
The goal of following master thesis is to design variety of configuration and retraction options of VUT200 TwinCobra landing gear. For each option are a wheel base and a gauge set up by possibility of main landing gear retraction. Next, CS 23 demands and stress analysis are followed. There is a view of twin engine aircraft landing gear disclosed as well.
APA, Harvard, Vancouver, ISO, and other styles
4

Forman, Tomáš. "Modifikace přistávacího zařízení letounu Irbis." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442836.

Full text
Abstract:
This master thesis deals with the landing gear rebuild from tail gear to nose gear of the M-4 Irbis aircraft. The first chapter presents the aircraft in its current state and includes some technical data, too. The theoretical information about types of landing gears, its characteristics, pros and cons and the typical representatives for each type of landing gear are mentioned in the second chapter. The third chapter is about landing gear loads that occur during landing and about the load calculation according to UL 2 regulation. The following chapter shows the construction of the new landing gear, including some of the suggested, but not realised, designs. In the fifth chapter, there is a landing gear strength calculation of some of the gear components. The calculation is analytical and then uses FEM. The very last chapter then shows the effect of new landing gear on the centre of gravity in its extreme positions. The chapter also compares aircraft masses with both landing gears.
APA, Harvard, Vancouver, ISO, and other styles
5

Šurkala, Martin. "Přestavba letounu Z 142 s pohonnou jednotkou LYCOMING." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319249.

Full text
Abstract:
The aim of this master´s thesis is to replace the current engine M 337AK of the aeroplane Zlin 142 for the engine of Lycoming type with an appropriate propeller. Another purpose of the study is the installation of a nose undercarriage of VUT 100 type. The first part of the thesis examines the alternatives of replacement engines. Here the individual engines are compared with regard to their flight characteristics (climbing etc.). The next part presents the calculation of new CG positions, flight envelopes and the load affecting the engine mount. Finally, the last part focuses on the constructional plan for the engine installation and the structural analysis.
APA, Harvard, Vancouver, ISO, and other styles
6

Vodička, Petr. "Návrh elektro-hydraulické soustavy pro ovládání příďového podvozku malého dopravního letounu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318402.

Full text
Abstract:
The diploma thesis is focused on design of electrohydraulic system for nose gear control on small civil airliners. First part consists of brief review of small civil airliners, nose gears and CS 23 restrictions relevant for the design. In practical part a typical small civil airliner is defined and kinematic of landing gear mechanisms is designed. Then the electrohydraulic system itself is designed and parameters of some components are suggested. The wheel steering mechanism is simulated and, in conclusion, the whole system is evaluated.
APA, Harvard, Vancouver, ISO, and other styles
7

Pauliny, Jozef. "Návrh podvozku čtyřmístného jednomotorového letounu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231654.

Full text
Abstract:
Cílem této práce je návrh pevného tříkolového podvozku pro jednomotorový čtyřmístný celokompozitní letoun s dodržováním certifikačních specifikací CS-23. To zahrnuje návrh kompozitních pružinových hlavních podvozkových vzpěr v kombinaci s hydropneumatickým tlumičem příďového podvozku. Proces návrhu se dělí do pěti specifických fází; požadavky na konstrukci, předběžný návrh, detailní návrh, příprava výroby a zkoušení prototypu. Zatížení podvozku pro jednotlivé případy a konfigurace letounu je definován v předběžné fázi návrhu. Detailní návrh zahrnuje pevnostní analýzu jednotlivých komponentů. Fáze zkoušení prototypu definuje způsob ověření únosnosti zkouškou. Závěr obsahuje podrobnou technickou dokumentaci.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography