Log in

Relevant bibliographies by topics / Printed circuit test / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Printed circuit test.

Dissertations / Theses on the topic 'Printed circuit test'

Author: Grafiati

Published: 4 June 2021

Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 dissertations / theses for your research on the topic 'Printed circuit test.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Kelly, Richard Thevenet. "DETERMINING COST EFFECTIVE TEST FLOWS FOR DIGITAL PRINTED CIRCUIT BOARDS." Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/275385.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gallagher, Charles. "The integrated design of printed circuit boards and their in-circuit test fixtures." Thesis, University of Salford, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.308112.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Seremet, Slavko. "Electrostatic simulation of a contactless test system for printed circuit boards." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0012/MQ32245.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Simlissi, Essossinam. "Modeling of delamination and interface strength in printed circuit boards." Electronic Thesis or Diss., Université de Lorraine, 2019. http://www.theses.fr/2019LORR0326.

Full text

Abstract:

Dans cette thèse, la résistance des interfaces dans les circuits imprimés (PCB) est étudiée. Un PCB est un élément passif permettant d’interconnecter des composants électroniques soudés sur les couches externes. Un PCB est un assemblage multicouche, multi-matériaux fait de composites tissés et de feuillards de cuivre. Le cuivre joue un rôle majeur dans les circuits imprimés car il est le support de l’information électrique. Pendant son cycle de vie, le PCB subit un grand nombre de cycles thermiques pouvant entraîner la rupture des fûts de cuivre. Par ailleurs, l’utilisation de certaines combin

APA, Harvard, Vancouver, ISO, and other styles

5

Nguyen, Minh Tam Tran. "Reliability Assessment of Ion Contamination Residues on Printed Circuit Board." Scholar Commons, 2013. http://scholarcommons.usf.edu/etd/4551.

Full text

Abstract:

Ion contaminants from Printed Circuit Board (PCB) assembly processes pose a high reliability risk because they result in damaged circuits. Therefore, it is essential to understand the level of ionic species on the electronic circuitry as well as the reliability risks caused by these contaminants. There are a number of approaches available in the industry to assess the reliability risks ; for example, the water drop test (WDT) is one of the techniques used to determine the propensity of an ionic contaminant to cause electrical short failures by dendrite formation. The objective of this research

APA, Harvard, Vancouver, ISO, and other styles

6

Dick, Jochen Helmut. "Cost modelling and concurrent engineering for testable design." Thesis, Brunel University, 1993. http://bura.brunel.ac.uk/handle/2438/5284.

Full text

Abstract:

As integrated circuits and printed circuit boards increase in complexity, testing becomes a major cost factor of the design and production of the complex devices. Testability has to be considered during the design of complex electronic systems, and automatic test systems have to be used in order to facilitate the test. This fact is now widely accepted in industry. Both design for testability and the usage of automatic test systems aim at reducing the cost of production testing or, sometimes, making it possible at all. Many design for testability methods and test systems are available which can

APA, Harvard, Vancouver, ISO, and other styles

7

Wegman, Kevin R. "Numerical Modeling of a Printed Circuit Heat Exchanger Based on Experimental Results from the High-Temperature Helium Test Facility." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1461266010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Goad, Kenneth G. "Integration of an X-Y prober with CAD driven database and test generation software for the testing of printed circuit boards." Thesis, Virginia Tech, 1987. http://hdl.handle.net/10919/45664.

Full text

Abstract:

<p>Guided probe testing of printed circuit boards is a technique that has been well developed by automatic test equipment manufacturers to pinpoint faults. Though the guided probe technique of testing printed circuit boards is a process capable of providing high diagnostic resolution, the technique is inefficient when it is performed manually. The throughput of board testing is bottlenecked because of the time required for an operator to manually move a probe to a specific location on the board under test in order to measure a stimulated response. Integration of a CAD driven X-Y prober i

APA, Harvard, Vancouver, ISO, and other styles

9

Aalto, Alve, and Ali Jafari. "Automatic Probing System for PCB : Analysis of an automatic probing system for design verification of printed circuit boards." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-174865.

Full text

Abstract:

The purpose of this thesis is to conduct an analysis of whether the printed circuit boards from Ericsson can be tested using an automatic probing system or what changes in the design are required, to be a viable solution. The main instrument used for analyzing the printed circuit board was an oscilloscope. The oscilloscope was used to get the raw data for plotting the difference between the theoretical and actual signals. Connected to the oscilloscope was a 600A-AT probe from LeCroy. The programs used for interpreting the raw data extracted from the oscilloscope included Python, Matlab and Exc

APA, Harvard, Vancouver, ISO, and other styles

10

Rosenkvist, Daniel, and Johan Eriksson. "Design and test of SiC circuit board for MIST satellite : KTH Student Satellite MIST." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-210666.

Full text

Abstract:

This paper describes work related to the “Miniature Student Satellite” (MIST) project and the ”SiC in Space” project, located at KTH, Stockholm, Sweden. The goal of the MIST project is to launch KTH’s first student satellite into space, carrying multiple scientific experiments where SiC in Space is included. This thesis contains a compilation of three MIST-related bachelor theses that were carried out at KTH in the spring of 2016, primarily consisting of constructing and testing circuits for power supply and measurements for the SiC in Space part of the satellite. A printed circuit board has b

APA, Harvard, Vancouver, ISO, and other styles

11

Štumpf, Martin. "Implementation and Test of a 2D-integral-equation MoM-algorithm for the Analysis of Power-Bus Structures on Printed Circuit Boards." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217683.

Full text

Abstract:

Tato práce se zabývá analýzou power-bus struktur využitím metody založené na formulaci problému 2D hraniční integrální rovnicí ve frekvenční oblasti. Uvedená metoda byla implementována v Matlabu. Program umožňuje analyzovat obecné polygonální power-bus struktury s možností nastavení parametrů substrátu a libovolného počtu a umístění budících portů. Výstupem programu je frekvenční závislost rozložení elektrického pole mezi deskami struktury, vztahy mezi porty struktury vyjádřené např. impedanční maticí a vyzařovací diagram. Dále byla implementována možnost převodu výsledné impedanční matice do

APA, Harvard, Vancouver, ISO, and other styles

12

Innocente, Federica. "Progetto, sviluppo e test di una scheda di controllo per articolazione protesica di spalla in architettura distribuita." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/15676/.

Full text

Abstract:

The amputation of a limb leads limitations in daily tasks that technology aims to overcome in developing specific prosthetic devices. The control system for proximal prosthesis (e.g. shoulder disarticulation) is more complex than the control for distal prosthesis beyond the elbow. Indeed, to date, only passive solutions are available for proximal prosthesis. In this thesis, an embedded control unit for a prosthetic shoulder joint was developed and realised at the Centro Protesi INAIL in Vigorso. This device aims to control the shoulder joint and it plays the role of “Slave” unit in a distribu

APA, Harvard, Vancouver, ISO, and other styles

13

Tremblay, Gérard. "Cartographie électro-optique de tension : application au test des circuits imprimés." Grenoble INPG, 1988. http://www.theses.fr/1988INPG0134.

Full text

Abstract:

Cette these developpe un outil mathematique de modelisation electrostatique permettant de determiner la reponse du capteur de mesure de tension a une repartition bidimensionnelle quelconque de potentiel electrique. Ces considerations theoriques ont ete verifiees grace a un capteur de tension experimental

APA, Harvard, Vancouver, ISO, and other styles

14

Johansson, Jimmy, and Martin Odén. "Development of Test Equipment for Analysis of Camera Vision Systems Used in Car Industry : Printed Ciruit Board Design and Power Distribution Network Stability." Thesis, Linköpings universitet, Elektroniska Kretsar och System, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-121806.

Full text

Abstract:

The main purpose of this thesis was to develop a printed circuit board for Autoliv Electronics AB. This circuit board should be placed in their test equipment to support some of their camera vision systems used in cars. The main task was to combine the existing hardware into one module. To be able to achieve this, the most important factors in designing a printed circuit board was considered. A satisfying power distribution network is the most crucial one. This was accomplished by using decoupling capacitors to achieve low enough impedance for all circuits. Calculations and simulations were ex

APA, Harvard, Vancouver, ISO, and other styles

15

Taboada, Efren De Jesus Rangel. "Improved Signal Integrity in IEEE 1149.1 Boundary Scan Designs." Diss., CLICK HERE for online access, 2004. http://contentdm.lib.byu.edu/ETD/image/etd587.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Lan, Hsien-Chin, and 藍先進. "The Impact Test and Finite Element Analysis of Printed Circuit board." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/97556936143542921323.

Full text

Abstract:

碩士<br>元智大學<br>機械工程學系<br>93<br>It is not unusual for electronic products subjecting impact during the transportation or operation. The damage induced by the impact is one of the main causes for the failure in electronic products. Thus, impact test is required in most electronic devices. In this investigation, the printed circuit board with electronic components such as transformer, inductor, capacitor, and subjecting impact is analyzed by ANSYS/LS-DYNA finite element software and experimental impact test. The printed circuit board is fixed on a drop table at the height of 50mm, and dropped with

APA, Harvard, Vancouver, ISO, and other styles

17

Hongwei, Wu, and 吳泓緯. "Optimum Design Studies of Electronic Circuit Parameters for Blood Glucose Measurement with Test Strips Made of Gold Plated Printed Circuit Boards." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/pcmwf7.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>機電整合研究所<br>105<br>The demand for blood glucose test strips is increasing with the number of diabetics, and aside from karbogel strips, gold strips also are prevalent on the market. This study discusses optimizing the design parameter for a gold blood glucose test strip, in which the accuracy of blood glucose reading is related to the applied voltage and applied current for the electrochemical reaction in the reaction zone of the gold blood glucose test strip. The research consists of two parts. The first part is the applied voltage. The cyclic voltammetry graph shows that the

APA, Harvard, Vancouver, ISO, and other styles

18

Chang-Yu-Chieh and 張宇傑. "Performance of Gold Plated Printed Circuit Board Blood Glucose Test Strips Using Ink Jet Printing Process." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/h7kjwh.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>製造科技研究所<br>104<br>In this study we focused on the ink jet printing process to produce blood glucose strips made of immersion gold plated printed circuit board, on which was deposited a drop of enzyme solution on the reaction zone of the test strip. Conventional enzyme dispensing processes produced tests trips with coarse enzyme crystals randomly distributed inside the reaction zone of the test strips, while the new ink jet printing process produced tests trips with very fine enzyme crystals evenly distributed inside the reaction zone of the test strips, as demonstrated by the

APA, Harvard, Vancouver, ISO, and other styles

19

Pannell, Zachary William. "Design of a Highly Constrained Test System for a 12-bit, 16-channel Wilkinson ADC." 2009. http://trace.tennessee.edu/utk_gradthes/549.

Full text

Abstract:

Outer space is a very harsh environment that can cause electronics to not operate as they were originally intended. Aside from the extreme amount of radiation found in space, temperatures can also change very dramatically in a relatively small time frame. In order to test electronics that will be used in this environment, they first need to be tested on Earth under replicated conditions. Vanderbilt University designed a dewar that allows devices to be tested at these extreme temperatures while being radiated. For this thesis, a test setup that met all of the dewar's constraints was designed th

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!