Relevant bibliographies by topics / Printed stripes

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Printed stripes'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Printed stripes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Printed stripes"

1

Nam, Sooji, Yong Jin Jeong, Jaemin Jung, et al. "Direct printing of soluble acene crystal stripes by a programmed dip-coating process for organic field-effect transistor applications." Journal of Materials Chemistry C 6, no. 4 (2018): 799–807. http://dx.doi.org/10.1039/c7tc04118g.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Robinson, Kay J., Edgar Chambers, and Barbara M. Gatewood. "Influence of Pattern Design and Fabric Type on the Hand Characteristics of Pigment Prints." Textile Research Journal 67, no. 11 (1997): 837–45. http://dx.doi.org/10.1177/004051759706701108.

Full text
Abstract:
Two cotton fabrics printed with two pigment types in six designs have been analyzed by a trained descriptive panel to evaluate the effects of pattern design, color, and fabric type on seventeen hand characteristics. The six designs include a 3.2 mm wide stripe, a paisley, a 6.4 mm diameter dotted design, a 25.4 mm wide stripe, a modern swirl, and a check with 6.4 mm crossed stripes, and are printed on a 100% cotton shirting and an interlock knit with two print paste formulations that differ in pigment type (C.I. Pigment White 6 and C.I. Pigment Blue 15:3) and concentration. Results show that f
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Xiao Quan. "A Fabrication of the High Emitter-Isolating-Layer for Printed Cold Cathode in Field Emission Display Panel." Advanced Materials Research 459 (January 2012): 567–70. http://dx.doi.org/10.4028/www.scientific.net/amr.459.567.

Full text
Abstract:
Using black insulation slurry as manufacture material, the high emitter-isolating-layer was fabricated on the cathode plate. The high emitter-isolating-layer which possessed good insulation performance was composed of many parallel emitter-isolation-stripes, which the bottom cathode electrode would be exposed in the center of the emitter-isolation-stripe. The carbon nanotube paste was prepared onto the cathode plate to form the field emitters. And the field emission display panel with high emitter-isolating-layer was demonstrated, which the better field emission property including the large em
APA, Harvard, Vancouver, ISO, and other styles
4

Wu, Chao, Ti Hong Li, and Ting Yue Guo. "Fabrication and Optimization of Printed Carbon Nanotube Field Emitters for Flat-Panel Display Device." Materials Science Forum 663-665 (November 2010): 800–803. http://dx.doi.org/10.4028/www.scientific.net/msf.663-665.800.

Full text
Abstract:
Screen-printing process was adopted to prepare the carbon nanotube cathode. For improving the field emission performance of cold-cathode material, the optimized carbon nanotube cathode fabrication structure was given, and the detailed manufacture process was also described. The photoetched cathode indium-tin-oxide (ITO) stripes including the narrow bar ITO connecting line was fabricated to form the cathode electrodes. The annular silver conducting layer was adopted between the cathode ITO stripes and the carbon nanotube field emitters. The whole display device was packaged by means of glass fr
APA, Harvard, Vancouver, ISO, and other styles
5

Guo, Qiang, and Yu Kui Li. "Fabrication Research and Property of Double Cold Cathode for the Field Emission Display Panel." Advanced Materials Research 186 (January 2011): 75–78. http://dx.doi.org/10.4028/www.scientific.net/amr.186.75.

Full text
Abstract:
With the precise photolithography process and simple screen-printing technique, the double cold cathode structure was fabricated on the cathode plate. The indium tin oxide (ITO) film coated over the cathode plate surface was etched to form bar ITO stripes, which was used as the cathode electrode. The one ITO group was composed of two parallel bar ITO stripes, on which the screen-printed carbon nanotube paste was employed to form the field emitter. The covering layer was also fabricated by the solidified insulation slurry with the pre-determined patterns. The phosphor prepared on the anode plat
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Yuzhi, and Shengdong Zhang. "Fully Inkjet-Printed Short-Channel Metal-Oxide Thin-Film Transistors Based on Semitransparent ITO/Au Source/Drain Electrodes." Coatings 10, no. 10 (2020): 942. http://dx.doi.org/10.3390/coatings10100942.

Full text
Abstract:
In this work, short-channel semitransparent indium-tin-oxide (ITO)/Au electrode pairs were fabricated via inkjet printing and lift-off technology. The printed hydrophobic coffee stripes not only define the channel length of ITO/Au electrode pairs, but also help the realization of uniform short-channel In0.95Ga0.05Ox thin-film transistors (TFTs). The patterned semitransparent ITO/Au films, with the assistance of inkjet printing, exhibit an excellent conductivity compared to that of printed ITO films, and the short-channel In0.95Ga0.05Ox TFTs based on the semitransparent ITO/Au source/drain elec
APA, Harvard, Vancouver, ISO, and other styles
7

Rivalta, Francesco, Lorella Ceschini, Anders E. W. Jarfors, and Roland Stolt. "Effect of Scanning Strategy in the L-PBF Process of 18Ni300 Maraging Steel." Metals 11, no. 5 (2021): 826. http://dx.doi.org/10.3390/met11050826.

Full text
Abstract:
Maraging steels are good candidates for the laser powder bed fusion process (L-PBF), also known as Selective Laser Melting, due to excellent weldability and resistance to quench cracking. Powders physical and chemical characteristics dominate the final microstructure and properties of the printed parts, that are also heavily influenced by the process parameters. In this study, the effects of the scanning strategies on dimensions, average surface roughness, density and material hardness were evaluated, keeping the powder type and the volumetric energy density (Andrew number) constant. The effec
APA, Harvard, Vancouver, ISO, and other styles
8

Huang, Cheng-Kuang, and Athene Donald. "Revealing the dependence of cell spreading kinetics on its spreading morphology using microcontact printed fibronectin patterns." Journal of The Royal Society Interface 12, no. 102 (2015): 20141064. http://dx.doi.org/10.1098/rsif.2014.1064.

Full text
Abstract:
Since the dawn of in vitro cell cultures, how cells interact and proliferate within a given external environment has always been an important issue in the study of cell biology. It is now well known that mammalian cells typically exhibit a three-phase sigmoid spreading on encountering a substrate. To further this understanding, we examined the influence of cell shape towards the second rapid expansion phase of spreading. Specifically, 3T3 fibroblasts were seeded onto silicon elastomer films made from polydimethylsiloxane (PDMS), and micro-contact printed with fibronectin stripes of various dim
APA, Harvard, Vancouver, ISO, and other styles
9

Mesicek, Jakub, Quoc-Phu Ma, Jiri Hajnys, et al. "Abrasive Surface Finishing on SLM 316L Parts Fabricated with Recycled Powder." Applied Sciences 11, no. 6 (2021): 2869. http://dx.doi.org/10.3390/app11062869.

Full text
Abstract:
Improving the surface roughness quality of 3D printed components, especially metallic ones, which are fabricated from the selective laser melting (SLM) method, has drawn enormous attention from the research community. It should be noted that various studies on this topic have reported that precise surface roughness results can be obtained with various techniques that are indeed not cost-effective. Differing itself from these studies, this manuscript investigates an economical solution for fabricating and surface treating SLM components. Specifically, the inspected specimens were printed with r
APA, Harvard, Vancouver, ISO, and other styles
10

Hou, Tianyuan, Xianfeng Zhou, Yi Xin, and Tingting Lin. "Screen-Printed Parallel-Stripes Electrodes Toward Oriented Piezoelectric Nanofibers Sensors for Both Stability and Sensitivity Improvement." IEEE Sensors Journal 21, no. 21 (2021): 23898–902. http://dx.doi.org/10.1109/jsen.2021.3117271.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Printed stripes"

1

Kholin, D. "Recent innovations." Thesis, Sumy State University, 2017. http://essuir.sumdu.edu.ua/handle/123456789/62816.

Full text
Abstract:
Innovation can be defined simply as a "new idea, device or method". We live in the age of science. People live, move and think in terms of science. Science has improved the quality of our life. Water, air, time and space have been conquered. People constantly use natural resources. There are wonderful innovations in all spheres of our life.
APA, Harvard, Vancouver, ISO, and other styles
2

Konnaiyan, Karthik Raj. "Smartphone Based 3D Printed Colorimeter for Biomedical Applications." Scholar Commons, 2015. http://scholarcommons.usf.edu/etd/5975.

Full text
Abstract:
Here we present a novel Smartphone-based colorimeter and demonstrate its application to the measurements of glucose and protein concentrations in biological samples. The key innovation of our approach was to combine powerful image processing encoded into a mobile phone application with a low cost 3D printed sample holder that allowed to control lighting conditions and significantly improved sensitivity. Different solutions with protein and glucose concentrations ranging from 0 to 2000 mg/dL were prepared and analyzed using our system. The Smartphone-based colorimeter always correctly classifie
APA, Harvard, Vancouver, ISO, and other styles
3

Rajagopal, Abhilash. "Printed circuit board (PCB) loss characterization up-to 20 GHz and modeling, analysis and validation." Diss., Rolla, Mo. : University of Missouri-Rolla, 2007. http://scholarsmine.umr.edu/thesis/pdf/Rajagopal_09007dcc803bf920.pdf.

Full text
Abstract:
Thesis (M.S.)--University of Missouri--Rolla, 2007.<br>Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed November 26, 2007) Includes bibliographical references (p. 112-113).
APA, Harvard, Vancouver, ISO, and other styles
4

Sjögren, Sara. "Blandband." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20831.

Full text
Abstract:
Under tio veckor har jag arbetat med skapandet av kollektionen Blandband. Utgångspunkten var ränder och lura ögat. Jag ville undersöka vad som utgör en rand och hur en tredimensionell rand ser ut. Redan i början av arbetet satte jag en färgskala bestående av dels kulörta, starka färger och dels två nyanser av grått samt svart och vitt. Jag angrep arbetet med hjälp av en designmetod bestående av fem faser: Målsättning och research, Idéutveckling, Konceptutveckling, Realisering, Presentation och kommunikation. Färgpaletten, målsättning och moodboard som togs fram under första fasen fungerade til
APA, Harvard, Vancouver, ISO, and other styles
5

Fredin, Lisa. "(Un)Perfect : Breaking the rules in textile printing." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-10286.

Full text
Abstract:
This work explores the techniques of printing and preparation, in combination with technical mistakes. It aims to show how to use technical mistakes in different printing and preparation techniques as a design method to find accidental aesthetic expressions using the stripe as a tool to enhance and clarify the methods modification. The method confronts today’s textile industry by showing how these mistakes could develop into new expressions within textile design when fast -fashion is no longer an obligation. The stripe is a common shape, and is explored to clarify the method ans show how diffe
APA, Harvard, Vancouver, ISO, and other styles
6

Filliot, Camille. "La bande dessinée au siècle de Rodolphe Töpffer : catalogue commenté des albums et feuilletons publiés à Paris et à Genève, de 1835 à 1905." Thesis, Toulouse 2, 2011. http://www.theses.fr/2011TOU20075.

Full text
Abstract:
Cette thèse a pour objectif premier de dresser un inventaire des albums et des feuilletons de bande dessinée publiés à Paris et à Genève, à partir des « histoires en estampes » de Rodolphe Töpffer jusqu’aux séquences de Christophe publiées dans Le Petit Français illustré. L’établissement du catalogue amène à élargir le cadre initial de la recherche pour aborder diverses formes de récits en images que voit se développer le XIXe siècle. À partir de là, il s’agit d’envisager la bande dessinée à travers ses principaux supports éditoriaux (l’album et la presse illustrée, mais aussi l’imagerie popul
APA, Harvard, Vancouver, ISO, and other styles
7

Bendzovski, Daniel. "Trend-sandwich : Exploring new ways of joining inspiration, such as different kinds of trends, through processes of morphing and melding different trendy garments and materials, for new methods, garment types, materials and expressions." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-248.

Full text
Abstract:
The aim of this work is to explore the joining of inspiration, such as different garments and materials, in relation to commonly used methods in the fashion industry when it comes to joining of different trends and references such as clashing and collaging. The work proposes a new method and framework for join- ing inspiration which generates different results depending on what kind of inspiration that is put in to it. A garment can roughly be broken down to a silhouette and shape, materials and details. The material put in to the method and framework is based on information from trend seminar
APA, Harvard, Vancouver, ISO, and other styles
8

Thomas, Evan Benjamin. "Toward Early Modern Comics." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1502561240762248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lu, Yi-Chen, and 呂宜貞. "Fabricating the Biosensing Strips of Tyrosinase-Printed Carbon Electrode Modified with Gold Nanoparticles and Applications of the Biosensing strips." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/82183727120977315780.

Full text
Abstract:
碩士<br>國立交通大學<br>生化工程研究所<br>96<br>Among the pesticides, organophosphate and carbamate compounds are widely used in agriculture. The mode of action of these pesticides is based on inhibition of the activity of acetylcholine esterase (AChE) enzyme in the hydrolysis of the neurotransmitter acetylcholine. The inhibition of the activity of AChE results in an excess of acetylcholine and effect the responsible for the transmission of nervous impulses. Additionally, reduced glutathione (GSH) is a major antioxidant in organisms. Alterations in GSH concentration have also been demonstrated to be a common
APA, Harvard, Vancouver, ISO, and other styles
10

Chang-Yu-Chieh and 張宇傑. "Performance of Gold Plated Printed Circuit Board Blood Glucose Test Strips Using Ink Jet Printing Process." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/h7kjwh.

Full text
Abstract:
碩士<br>國立臺北科技大學<br>製造科技研究所<br>104<br>In this study we focused on the ink jet printing process to produce blood glucose strips made of immersion gold plated printed circuit board, on which was deposited a drop of enzyme solution on the reaction zone of the test strip. Conventional enzyme dispensing processes produced tests trips with coarse enzyme crystals randomly distributed inside the reaction zone of the test strips, while the new ink jet printing process produced tests trips with very fine enzyme crystals evenly distributed inside the reaction zone of the test strips, as demonstrated by the
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Printed stripes"

1

director, Thévenet Jean-Marc editorial, ed. Princes de la nuit. Futuropolis, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bhartia, P. Millimeter-wave microstrip and printed circuit antennas. Artech House, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gauthier, André-Christian. Douze travailleurs en colère: Des amis de Marc. Les Lettres libres, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

illustrator, Chin Yŏng-hun, ed. Tae Kwang-hyŏn: Chosŏn yŏksa inmul iyagi kŭrimch'aek. Kŭmsŏng Ch'ŏngnyŏn Ch'ulp'ansa, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Albom, Mitch. The magic strings of Frankie Presto. Sphere, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

interviewer, Conway Mimi, Southern Oral History Program, University of North Carolina at Chapel Hill. Documenting the American South (Project), and University of North Carolina at Chapel Hill. Library, eds. Oral history interview with Ernest Seeman, February 13, 1976: Interview B-0012, Southern Oral History Program Collection (#4007). University Library, UNC-Chapel Hill, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sugiura, Shiho. Silver diamond: Switch all on. Tokyopop, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sugiura, Shiho. Silver diamond: After death. Tokyopop, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kim, Hee-Eun. A kiss for my prince. Infinity Studios, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bograd, Larry. Colorado summer: The story of a paint named Georgia and the city girl who strives to make champions of them both. Ertl, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Printed stripes"

1

Hills, Nancy E. "Striped Wool Printed Dress." In Recreating Historic Dress. Routledge, 2024. http://dx.doi.org/10.4324/9781032624631-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hills, Nancy E. "Striped Cotton Print Wedding Dress." In Recreating Historic Dress. Routledge, 2024. http://dx.doi.org/10.4324/9781032624631-11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gasieniec, Leszek, Marek Karpinski, Wojciech Plandowski, and Wojciech Rytter. "Randomized efficient algorithms for compressed strings: the finger-print approach." In Combinatorial Pattern Matching. Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/3-540-61258-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Álvarez Sánchez, Sergio. "The Influence of Printed and Online Diaries in the Attitudes of Their Readers Towards the 2010 and 2012 Spanish General Strikes." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-46068-0_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, Margaret. "Princes and Paradise: Rabban Sauma in the Western Mediterranean." In Studi e saggi. Firenze University Press, 2024. https://doi.org/10.36253/979-12-215-0598-6.07.

Full text
Abstract:
This chapter is an analysis of the China-Mediterranean connection of the Nestorian monk Rabban Sauma, the first known Chinese-born person to visit the European Mediterranean, in the History of Mar Yahballaha and Rabban Sauma, a Syriac work of unknown authorship about the Ilkhanate composed early in the fourteenth century. Born an Önggüd Turk in Beijing sometime between 1220 and 1230, Sauma and his pupil Mark left Khubilai Khan’s China for the Holy Land around 1275. They settled in the Ilkhanate when war re-directed them there. Early in 1287, the Ilkhan Arghun, seeking an alliance with Latin Eu
APA, Harvard, Vancouver, ISO, and other styles
6

Kohls, Christian, Alexander Dobrynin, and Florian Leonhard. "Wir haben bereits gesehen, dass alle Objekte als Strings repräsentiert werden, sobald wir diese z. B. an die println-Funktion übergeben. Dies liegt daran, dass alle Klassen die toString-Methode von der allgemeinen Oberklasse Any erben." In Programmieren lernen mit Kotlin. Carl Hanser Verlag GmbH & Co. KG, 2020. http://dx.doi.org/10.3139/9783446467118.017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ni, Jialu, Wenhui Shi, Pinghua Xu, Qiuju Wei, Xiaowan Sun, and Yanmo Zhou. "Automatic Density Measurement of Striped Woven Fabrics Based on Adaptive Filtering." In Frontiers in Artificial Intelligence and Applications. IOS Press, 2023. http://dx.doi.org/10.3233/faia220708.

Full text
Abstract:
In order to reduce the interference of stripe signal on the density automatic measurement of woven fabric and extend the the application scope, an adaptive Gaussian Notch Filtering (GNF) algorithm based on Fast Fourier transform is proposed. In the pre-proceesing stage, the Fourier transform was utilized to transform the woven fabric bitmap to spectral image, as to obtain the spectral characteristics of the striped fabric. The improved GNF algorithm was used to identify the peak of stripe signal, which determined the bandwidth radius and locate the stripe bright area. Based on the fused Fourie
APA, Harvard, Vancouver, ISO, and other styles
8

"print yarn stripes." In The Fairchild Books Dictionary of Textiles. Fairchild Books, 2021. http://dx.doi.org/10.5040/9781501365072.12788.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Finkelstein, David. "Striking Printers." In Movable Types. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198826026.003.0003.

Full text
Abstract:
In the 1870s, print trade unions joined an international effort to fight for a ‘nine-hour’ or ‘short-time’ working day. Several key print trade labour strikes followed in the wake of this. This chapter focuses on six compositor and printer labour strikes in London, Toronto, Edinburgh, and Dublin that took place during the 1870s, linked to the nine-hour working day movement. Though some were deemed failures at the time (and in four cases cataclysmic in terms of trade organization effectiveness), several resulted in key social and organizational changes in relevant regions, some intended, others
APA, Harvard, Vancouver, ISO, and other styles
10

Ahamed, Fayyaz, and Apros Kanna. "Digital Orthodontic Auxiliaries." In Dentistry. IntechOpen, 2025. https://doi.org/10.5772/intechopen.112952.

Full text
Abstract:
Recent developments in scanning technology, virtual modeling, and three-dimensional (3D) printing have made every aspect of fabricating a patient-specific appliance possible in an orthodontic setup. The ability to acquire a real-time 3D diagnostic dataset with an intraoral scan or cone-beam tomography (CBCT) is rapidly changing our practice workflow. While the 3D printing is entering our practice with newer generation of printers rendering accurate, affordable and instant prototypes, it’s one of the clearest strengths is customization. This chapter discuss the patient specific 3D printed ortho
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Printed stripes"

1

Kaltenecker, K. J., B. M. Fischer, P. Bollgruen, J. G. Korvink, and M. Walther. "THz pulse propagation along inkjet-printed metal stripes: Towards a 3D wire-medium for subwavelength imaging." In 2012 37th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2012). IEEE, 2012. http://dx.doi.org/10.1109/irmmw-thz.2012.6380235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Montagni Domingues Filho, Gabriel, Caetano Mazzoni Ranieri, Douglas Queiroz Galucio Batista, and Jó Ueyama. "Enhancing Water Level Identification with a Barcode-Patterned Panel and Machine Learning." In Encontro Nacional de Inteligência Artificial e Computacional. Sociedade Brasileira de Computação - SBC, 2023. http://dx.doi.org/10.5753/eniac.2023.234311.

Full text
Abstract:
Floods cause significant material and human losses worldwide, leading to research in monitoring water levels in urban streams. Existing technologies, such as pressure and ultrasonic sensors, are accurate but costly to deploy. Although ground cameras offer a low-cost alternative, current approaches relying on weak visual markers are sensitive to environmental factors. We address this research gap by introducing a physical marker, called "barcode panel", which is a stainless steel plate with printed black stripes indicating water level. A deep learning algorithm was employed to accurately predic
APA, Harvard, Vancouver, ISO, and other styles
3

Al Rashid, Ans, and Muammer Koç. "Economically Viable Plastic Recycling to Produce Additive Manufacturing Feedstock Using Waste Bottles for Circular Economy." In ASME 2024 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/imece2024-140719.

Full text
Abstract:
Abstract The pursuit of sustainable practices in manufacturing has become increasingly imperative in addressing environmental concerns and resource scarcity. One promising avenue is using waste materials within a circular economy framework. This paper presents an economically viable 3D-printed setup for additive manufacturing feedstock using waste bottles. The process begins with collecting and preparing waste bottles, which are sorted, cleaned, and cut into uniform strips suitable for extrusion. The plastic strips are transformed into filaments using a hotend volcano nozzle suitable for use i
APA, Harvard, Vancouver, ISO, and other styles
4

Tummala, Vana Snigdha, Ahsan Mian, Nowrin H. Chamok, Mohammod Ali, Jallisa Clifford, and Prasun Majumdar. "3D Printed Porous Dielectric Substrates for RF Applications." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65880.

Full text
Abstract:
In this study, dielectric properties of Acrylonitrile butadiene styrene (ABS) thermoplastic material with different fill-densities are investigated. Three separate sets of samples with dimensions of 25 mm × 25 mm × 5 mm were created at three different machine preset porosities using a LulzBot 3D printer. To understand the actual porosities of the samples, a 3D X-ray computed tomography microscope was used. The great advantage of this 3D microscopy is that it is fully non-destructive and requires no specimen preparation. Hence, the manufacturing defects and lattice variations can be quantified
APA, Harvard, Vancouver, ISO, and other styles
5

Emon, Md Omar Faruk, and Jae-Won Choi. "A Preliminary Study on 3D Printed Smart Insoles With Stretchable Piezoresistive Sensors for Plantar Pressure Monitoring." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71817.

Full text
Abstract:
In this report, we present a 3D printed insole which has multiple soft pressure sensors inserted in it to detect the force on the sole including heel, midfoot, and forefoot as well as timing and location of the strike while walking. The insole was 3D printed using a soft and flexible material having multiple open channels on it to attach sensors. Flexible and stretchable piezoresistive sensors were fabricated via screen printing and molding processes. The multi-layer sensor comprises an ionic liquid (IL) based piezoresistive layer sandwiched between two multi-walled carbon nanotube (MWCNT) bas
APA, Harvard, Vancouver, ISO, and other styles
6

Joshi, Ravi Kumar, and Ayyangar Ranganath Harish. "Printed wideband variable strip width loop antenna." In 2007 IEEE Antennas and Propagation Society International Symposium. IEEE, 2007. http://dx.doi.org/10.1109/aps.2007.4396616.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ahmed, Shahid, and David Linton. "Propagation of UWB pulses on metal strips printed on semiconductor dielectrics." In 2007 European Microwave Conference. IEEE, 2007. http://dx.doi.org/10.1109/eumc.2007.4405304.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Eccleston, Kimberley W., Yiwen Zhou, Ian G. Platt, Adrian E. C. Tan, and Ian M. Woodhead. "Planar Lens Based on Dielectric Resonators and Printed Continuous Metal Strips." In 2020 IEEE Asia-Pacific Microwave Conference (APMC 2020). IEEE, 2020. http://dx.doi.org/10.1109/apmc47863.2020.9331371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Isaac, Ayman Abbosh, Hussain Al-Rizzo, Said Abushamleh, and Haider Raad. "Isolation enhancement between two vertical monopole antennas using two printed strips." In 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2017. http://dx.doi.org/10.1109/apusncursinrsm.2017.8073181.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mulay, Shirish. "Thermal Simulation and Experimental Comparison of a Printhead." In ASME 2007 5th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2007. http://dx.doi.org/10.1115/icnmm2007-30165.

Full text
Abstract:
Thermal inkjet technology (TIJ) has been the widely preferred method of inkjet printing since its market inception in 1985. Thermal inkjet technology continues to enjoy a greater unit market share for printers than any other printing technology. In this presentation history of inkjet printing will be discussed. In the recent past, thermal inkjets have made great strides. Speed of printing is a strong function of the swath size and can be increased by increasing the chip size. Photo quality printing has reached new levels by reducing drop size and spot size. This has been achieved by increasing
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Printed stripes"

1

Rozemeijer, M. J. C., R. Cramer, B. Deetman, and A. Korving. An overview and conclusion concerning the use of Bruce anchors to anchor crab-pot-strings in Prinses Amalia Offshore Windpark. Wageningen Marine Research, 2022. http://dx.doi.org/10.18174/576750.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Struik, L. C. Pre-cretaceous terranes and their thrust and strike-slip contacts, Prince George [east half] and Mcbride [west half], British Columbia. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1985. http://dx.doi.org/10.4095/120051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Printed stripes' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography