Log in

Relevant bibliographies by topics / Printing equipment repair / Journal articles

To see the other types of publications on this topic, follow the link: Printing equipment repair.

Journal articles on the topic 'Printing equipment repair'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Printing equipment repair.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kowalski, Kazimierz, Wiktor Biernikowicz, and Grzegorz Stankiewicz. "POSSIBILITIES OF USING 3D PRINTING IN FIELD REPAIRS OF MILITARY EQUIPMENT." Rocznik Bezpieczeństwa Morskiego XVIII (November 6, 2024): 873–86. https://doi.org/10.5604/01.3001.0054.8334.

Full text

Abstract:

Current armed conflicts confirm the thesis about the necessity of repairing damaged military equipment in the shortest possible time and in the closest possible location to the damaged equipment. These repairs are performed by the users of the equipment themselves, or with the participation of mobile repair teams, or service groups (so called „field repairs”). The continuous development of technologies used in technical repairs, including 3D printing, increases the potential possibilities of their use in the field repair process. The aim of the article is to identify the possible advantages an

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Chongqing, Fuqiuxuan Liu, and Quanyue Zhang. "Research on Potential Application of FDM 3D Printing Equipment Rush Repair Support." Academic Journal of Science and Technology 5, no. 3 (2023): 93–95. http://dx.doi.org/10.54097/ajst.v5i3.7784.

Full text

Abstract:

According to the characteristics and application of 3D printing technology, the problems to be faced in the process of equipment maintenance and rush repair are analyzed, and the advantages of 3D printing technology for equipment maintenance and rush repair are summarized. Moreover, the phenomenon analysis, finite element analysis and analysis optimization are carried out in combination with the vulnerable parts in large engineering equipment. To provide data samples based on FDM 3D printing technology in equipment maintenance and rush repair, explore potential applications.

APA, Harvard, Vancouver, ISO, and other styles

3

Gong, Fangyuan, Xuejiao Cheng, Qinghua Wang, Yi Chen, Zhanping You, and Yu Liu. "A Review on the Application of 3D Printing Technology in Pavement Maintenance." Sustainability 15, no. 7 (2023): 6237. http://dx.doi.org/10.3390/su15076237.

Full text

Abstract:

To examine the application and significance of 3D printing technology in pavement maintenance engineering, a review of the current developments in principles, types, materials, and equipment for 3D printing was conducted. A comparison and analysis of traditional methods and 3D printing for asphalt pavement maintenance led to an investigation of 3D asphalt printing technologies and equipment. As a result, the following suggestions and conclusions are proposed: 3D printing technology can increase the level of automation and standardization of pavement maintenance engineering, leading to effectiv

APA, Harvard, Vancouver, ISO, and other styles

4

Senin, Petr V., Mikhail N. Chatkin, and Evgeniy A. Kilmyashkin. "Additive Technologies for Production and Repair of Agricultural Equipment." Engineering technologies and systems 34, no. 4 (2024): 584–96. https://doi.org/10.15507/2658-4123.034.202404.584-596.

Full text

Abstract:

Introduction. The article raises the issue of repairing modern agricultural machinery. Because of increasing the complexity of the design of machine components, there is a problem of failure of their parts. Manufacturers often do not sell these parts separately that makes it impossible to repair failed machine components. In this case, the purchase of a machine component assembly is required. The problem of supplying service parts is very significant. This significantly increases the repair time that negatively affects the agricultural production profitability due to the extremely limited time

APA, Harvard, Vancouver, ISO, and other styles

5

Yustiani Frastika, Frisca Mareyta Pongoh, Dedtri Anwar, Arika Palapa, and Jaya Alamsya. "Analysis of the Application of Additive Manufacturing for On-Demand Repair and Maintenance of Naval Equipment in Remote Maritime Operations." International Journal of Mechanical, Industrial and Control Systems Engineering 2, no. 1 (2025): 46–61. https://doi.org/10.61132/ijmicse.v2i1.255.

Full text

Abstract:

Background: Traditional naval maintenance strategies rely on centralized supply chains and pre-manufactured spare parts, leading to long repair downtimes and logistical inefficiencies, particularly for vessels operating in remote maritime regions. Additive manufacturing (3D printing) offers a disruptive alternative by enabling on-demand production of spare parts, reducing dependence on external suppliers, and enhancing fleet self-sufficiency. However, material durability, operational feasibility, and cost-effectiveness remain underexplored for naval applications. Original Value: This research

APA, Harvard, Vancouver, ISO, and other styles

6

Sherov, K. T., D. I. Berdimuratova, B. Myrzahmet, A. A. Sagitov, and S. I. Mendalieva. "Study of the possibility of using additive technology methods in the repair of agricultural machinery parts." BULLETIN of the L.N. Gumilyov Eurasian National University. Technical Science and Technology Series 148, no. 3 (2024): 241–52. http://dx.doi.org/10.32523/2616-7263-2024-148-3-241-252.

Full text

Abstract:

Currently, maintaining agricultural machinery in a constant working condition is an urgent task. Studies carried out to study the state of the problem in the conditions of agricultural enterprises of the Republic of Kazakhstan have shown that the lack of centralized repair and restoration bases and production facilities has a negative impact on the quality organization of agricultural machinery. Because of this, it is impossible to carry out repair and restoration work in a timely and high-quality manner, as well as technical maintenance of agricultural machinery and equipment. To solve this p

APA, Harvard, Vancouver, ISO, and other styles

7

Rimmer, Matthew. "The Medical Right to Repair: Intellectual Property, the Maker Movement, and COVID-19." Sustainability 15, no. 20 (2023): 14839. http://dx.doi.org/10.3390/su152014839.

Full text

Abstract:

This article considers the strengths and limitations of the use of 3D printing and additive manufacturing for the production of personal protective equipment (PPE) during the COVID-19 public health crisis. It explores the role of the Maker Movement in addressing the shortfall in medical equipment during the public health pandemic. Taking a comparative approach, this article evaluates the responses of both the commercial and amateur sides of the 3D printing community to the COVID-19 public health crisis. In the EU, the Fab Lab Network sought to overcome a breakdown in supply chains. In the US,

APA, Harvard, Vancouver, ISO, and other styles

8

Sevostyanov, Ivan, and Maryna Pidlypna. "MODEL OF OPTIMIZATION OF FUNCTIONING OF MODERN POLYGRAPHIC AND PUBLISHING COMPLEXES." ENGINEERING, ENERGY, TRANSPORT AIC, no. 4(111) (December 18, 2020): 90–99. http://dx.doi.org/10.37128/2520-6168-2020-4-10.

Full text

Abstract:

Analysis of known methods and modern equipment for printing and publishing (sheet rotary machines, roll machines, flat-printing and platen machines for flat impression block, relief, intaglio and digital printing) is conducted in this article. In a result of the analysis article authors have to make a conclusion, that most prospective equipment for automated printing and publishing complexes are: high-performance sheet and roll machines, in that number crucible, flatbed and rotary three-cylinder machines and also single-layer and multi-layer sectional machines, digital laser and inkjet machine

APA, Harvard, Vancouver, ISO, and other styles

9

Golubev, I. G. "Promising Paths for the Use of Additive Technologies in the Repair Industry." Machinery and Equipment for Rural Area, no. 6 (June 14, 2023): 35–38. http://dx.doi.org/10.33267/2072-9642-2023-6-35-38.

Full text

Abstract:

Promising paths for the development of additive technologies in the Russian Federation, technologies for automated repair of machines and equipment using machine vision and learning, as well as the creation of mobile workshops and complexes for the repair of machine parts are shown. In the repair industry, 3D scanning and reverse engineering of parts, 3D printing of spare parts and 3D technologies for repairing parts and components will be in great demand. The use of 3D technologies in the repair of machines reduces the consumption of filler material during the restoration of parts and increas

APA, Harvard, Vancouver, ISO, and other styles

10

Kataev, Yu V., Yu A. Goncharova, A. S. Sviridov, and S. P. Tuzhilin. "Application of 3D Printing and 3D Scanning Technologies in the Manufacture and Repair of Agricultural Machinery." Machinery and Equipment for Rural Area, no. 1 (January 7, 2023): 34–38. http://dx.doi.org/10.33267/2072-9642-2023-1-34-38.

Full text

Abstract:

Data are presented on the study of the concept of a 3D farm in production, as well as an assessment of the possibilities and prospects for using this concept in the agribusiness based on real cases performed using the material and technical base of the Federal Scientific Agroengineering Center VIM. The main advantages and disadvantages of 3D printing were identified, the world experience in the use of additive technologies, as well as 3D printing and 3D scanning sites using technical base of the Federal Scientific Agroengineering Center VIM, both in the manufacture of prototypes and mock-ups,

APA, Harvard, Vancouver, ISO, and other styles

11

Дудукалов, Ю. В., В. Ф. Сорокін, М. Е. Тернюк та О. Б. Ківіренко. "ФОРМУВАННЯ СПОСОБІВ ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ ЗАСТОСУВАННЯ 3D-ПРИНТЕРІВ ДЛЯ КОМБІНОВАНОГО FDM-ДРУКУ З МОДИФІКАЦІЄЮ ПОЛІМЕРНИХ МАТЕРІАЛІВ". Open Information and Computer Integrated Technologies, № 98 (15 квітня 2024): 99–113. http://dx.doi.org/10.32620/oikit.2023.98.09.

Full text

Abstract:

Current manufacturing trends today include additive technologies. The scope of use of industrial technological equipment for 3D-printing is expanding. Printing methods are being improved. New polymer and composite materials with reinforcement are being used. The quality, accuracy and strength of products improves. To assess the effectiveness of the implementation of technological processes in industrial equipment, the OEE (Overall Equipment Efficiency) criterion is used. For industrial 3D printing installations, the OEE indicator includes three component performance criteria: the criterion for

APA, Harvard, Vancouver, ISO, and other styles

12

Batrakov, V. V., A. I. Krylov, V. N. Saev, B. N. Nefyodov, V. M. Novichkov, and D. V. Mukhina. "Upgrade and Repair of the Instrumentation Equipment on the ISS RS Simulators Using FDM 3D Printing Technology." MANNED SPACEFLIGHT, no. 2(39) (May 25, 2021): 97–110. http://dx.doi.org/10.34131/msf.21.2.97-110.

Full text

Abstract:

The paper presents space simulators (SS), types of instrumentation equipment installed on the workplaces of the space simulators operators (SSOPW), multi-functional display panel (MFDP), computer-aided design (CAD) tools, 3D printing technologies.

APA, Harvard, Vancouver, ISO, and other styles

13

Su, Da Zhen, Xiao Qiang Yang, and Jun Yan. "Design of Transportable Hydraulic System Fault Detection Equipment for Construction Machinery." Applied Mechanics and Materials 66-68 (July 2011): 2022–27. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.2022.

Full text

Abstract:

Based on embeded technology a portable fault detection equipment for the construction machinery hydraulic system is developed. The equipment is mainly composed of embeded hardware platform and graphical-interface software platform. The hardware platform includes the core control unit ECM-945GSE industrial computer, 8-channel data acquisition module based on ARM chip, LCD screen, touch screen, power supply module with large-scale operation voltage and wide temperature range, PTT pressure transducers, the integration transducer of temperature, pressure, flow rate transducer as well as equipment

APA, Harvard, Vancouver, ISO, and other styles

14

Rassokhin, D. O., O. V. Nosovska, and D. V. Kokodey. "Restoration of wear-out equipment using complex method of 3-D scanning and printing." Reporter of the Priazovskyi State Technical University. Section: Technical sciences, no. 47 (December 28, 2023): 170–80. http://dx.doi.org/10.31498/2225-6733.47.2023.300054.

Full text

Abstract:

Introduction. Equipment restoration is a complex process that requires a comprehensive approach. Wear of parts and components of large-scale equipment leads to a halt in technological processes, reduced productivity, and sometimes to the complete breakdown of the entire production chain. Problem Statement. In most cases, on-site repair is impossible. However, modern CAD technologies not only allow assessing the extent of wear but also suggest a path to restoration. The widespread use of 3D printing has significantly simplified the process of creating individual parts. However, the high accurac

APA, Harvard, Vancouver, ISO, and other styles

15

John, S. C., A. John, L. Cuthbertson, K. VanKoevering, and G. Green. "3D Printing to Repair, Modify and Create Medical Equipment in a Resource Limited Setting." Annals of Global Health 83, no. 1 (2017): 45. http://dx.doi.org/10.1016/j.aogh.2017.03.099.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Tota Pirdo Kasih. "Enhancing Operational Efficiency: A Study on Total Productive Maintenance for the Heidelberg Speed master 102V." Journal of Information Systems Engineering and Management 10, no. 3s (2025): 130–44. https://doi.org/10.52783/jisem.v10i3s.366.

Full text

Abstract:

The aim of this intervention is centred on how Total Productive Maintenance (TPM – as commonly known in the literature) is applied on craftsmanship of the Heidelberg Speed master 102V offset printing machine with a view to improving the maintenance and consequently reducing the breakdown periods of the machine. The main aim is to assess how effective this management philosophy is in the reduction of degradation of equipment in the sector of printing media industry. The research methodology was quantitative, thus obtaining data from the maintenance records for the entire one-year period. Also,

APA, Harvard, Vancouver, ISO, and other styles

17

Kohnenko, N. S., I. I. Karpunin, and V. V. Kuz'mich. "Study of Reliability for Main Components and Devices of Die-Cutting Presses for Packaging." Science & Technique 19, no. 4 (2020): 320–28. http://dx.doi.org/10.21122/2227-1031-2020-19-4-320-328.

Full text

Abstract:

A large variety of machine operating conditions leads to a difference in the wear rate even for their units being of the same type. Operational time terms of single-type units and machines are not the same, and therefore, numerical expressions of operational reliability will be probabilistic values. Incomplete restoration of original properties of a unit, a negligent repair, a poor maintenance usually lead to the fact that any of several parts independently one from another can determine reliability of a machine (a unit). This is especially important to consider when manufacturing packaging in

APA, Harvard, Vancouver, ISO, and other styles

18

Oludayo Olatoye Sofoluwe, Adedayo Adefemi, Ifeanyi Onyedika Ekemezie, and Olusile Akinyele Babayeju. "Challenges and strategies in high-pressure high-temperature equipment maintenance." World Journal of Advanced Engineering Technology and Sciences 12, no. 1 (2024): 250–62. http://dx.doi.org/10.30574/wjaets.2024.12.1.0211.

Full text

Abstract:

High-pressure high-temperature (HPHT) equipment plays a critical role in the oil and gas industry, particularly in challenging environments such as deep-water drilling and reservoirs with extreme conditions. However, maintaining HPHT equipment poses significant challenges due to the harsh operating conditions and the need for stringent safety and reliability standards. This abstract explores the key challenges faced in HPHT equipment maintenance and discusses strategies to address these challenges. One of the primary challenges in HPHT equipment maintenance is managing the effects of high pres

APA, Harvard, Vancouver, ISO, and other styles

19

Tentasanu Ilham Berdotu, Rachmah Nanda Kartika, and Hibertus Rudi Kusmantoro. "Analisis Efektivitas Mesin AccurioPress 6100 dalam Produksi Cetak Digital Menggunakan Metode OEE." JURAL RISET RUMPUN ILMU TEKNIK 4, no. 2 (2025): 163–72. https://doi.org/10.55606/jurritek.v4i2.5577.

Full text

Abstract:

The development of digital printing technology requires machines with high reliability and efficiency. The AccurioPress 6100 is a widely used digital printing machine that offers a speed of up to 100 pages per minute. However, the machine’s Overall Equipment Effectiveness (OEE) at PT. OctoPrint only ranged from 45% to 53%, which is below the industry standard of 85%. This study identifies the gap in machine efficiency and proposes solutions based on OEE analysis involving Availability, Performance, and Quality indicators. The study adopts a descriptive quantitative method, collecting data thro

APA, Harvard, Vancouver, ISO, and other styles

20

Trimarjoko, Aris, and Ari Sulung Kurniawan Romadhon. "Markov Chain Method in Decision Implementation of Preventive Maintenance Scheduling to Reduce Equipment Downtime in PT. ADF Indonesia: Case Study." IJIEM - Indonesian Journal of Industrial Engineering and Management 5, no. 1 (2024): 183. http://dx.doi.org/10.22441/ijiem.v5i1.24820.

Full text

Abstract:

PT. ADF is a company operating in the shoe manufacturing industry located in Indonesia. PT. ADF has the problem of machine downtime which is currently still relatively high and requires quite a long repair time. The aim of this research is to reduce the high downtime of equipment or machines with the Markov chain method approach used in selecting the next strategy to produce a better probability of implementing scheduled preventive maintenance (PM) compared to Corrective Maintenance (CM), so that implementing a maintenance schedule is chosen to reduce downtime. equipment/machines. This strateg

APA, Harvard, Vancouver, ISO, and other styles

21

Hery Riyanto, Zainudin hasan, Afrizal, Ida Farida, and Ardansyah. "Optimizing Production Through Screen Printing Machine Usage and Maintenance Training." Jurnal Pengabdian Masyarakat Tapis Berseri (JPMTB) 4, no. 1 (2025): 13–22. https://doi.org/10.36448/jpmtb.v4i1.126.

Full text

Abstract:

Training on the use and maintenance of screen printing machines for UMKM Komunitas Jumat Berkah in Adijaya Village, Central Lampung Regency, aims to improve the technical skills and production efficiency of small business actors in the screen printing industry. This activity is carried out to overcome common problems that are often faced, such as inconsistent product quality, high machine repair costs, and low knowledge about choosing the right materials and inks. The training methods include theoretical explanations, direct demonstrations, independent practice, and machine maintenance session

APA, Harvard, Vancouver, ISO, and other styles

22

Vábek, Milan, Ondřej Novosad, Miroslav Pecina, and Jan Kotisa. "Integrating Emerging Technologies in Military Maintenance and Repairs: An Overview of Current Status, Opportunities and Challenges." Vojenské rozhledy 33, no. 3 (2024): 062–75. http://dx.doi.org/10.3849/2336-2995.33.2024.03.062-075.

Full text

Abstract:

Maintenance and repair (M&R) of military equipment are crucial for operational readiness. The article highlights challenges faced by military forces, particularly in the US, with significant equipment non-operable due to inefficient M&R. It emphasizes modernizing M&R through Predictive Maintenance (PM) and 3D Printing (AM). PM employs AI and data analytics for real-time monitoring and foreseeing malfunctions, signifying a strategic shift in M&R. AM significantly curtails downtime by enabling on-demand spare parts production, presenting a solution to traditional military M&R

APA, Harvard, Vancouver, ISO, and other styles

23

Eliseikin, Evgeny, Maksim Khudorozhko, and Rafik Rafikov. "REVERSE ENGINEERING OF ROLLING STOCK SPARE PARTS USING OPTICAL 3D SCANNING." Transport engineering 2025, no. 6 (2025): 38–44. https://doi.org/10.30987/2782-5957-2025-6-38-44.

Full text

Abstract:

The study is done to optimize labor costs for reverse engineering of products for new or existing series of railway rolling stock under repair: prototypes, scarce polymer or metal spare parts, non-standard devices, model and technological equipment, in the conditions of service and locomotive repair enterprises. The study objective is to develop training material describing step-by-step 3D scanning of spare parts by RangeVision optical 3D scanners with and without a rotary table, processing the resulting "scan" into an intermediate format file in peripheral programs before developing a solid-s

APA, Harvard, Vancouver, ISO, and other styles

24

Бачинський, В., О. Шкурпіт, М. Пестерев та В. Оленєв. "ПІДВИЩЕННЯ ЖИВУЧОСТІ БЕЗПІЛОТНИХ ЛІТАЛЬНИХ АПАРАТІВ ЗА РАХУНОК ВИКОРИСТАННЯ АДИТИВНИХ ТЕХНОЛОГІЙ". Collection of scientific works of Odesa Military Academy, № 19 (30 червня 2023): 74–79. http://dx.doi.org/10.37129/2313-7509.2023.19.74-79.

Full text

Abstract:

The article presents a method of increasing the survivability of unmanned aerial vehicles (UAVs) due to additive technologies (AT). The use of AT, namely 3D printing for the repair and printing of spare parts of UAVs during hostilities will significantly increase their survivability. It was determined that with the improvement of technological equipment and the development of methods of material selection for the manufacture of UAV elements, the direction of creating new UAVs with the help of AT will steadily expand. ATs provide an opportunity to obtain UAV elements of a certain shape and requ

APA, Harvard, Vancouver, ISO, and other styles

25

Firdah Lestari, Erlina, and Siti Mundari. "Analisis Efektivitas Mesin Heidelberg SM72-FP dalam Upaya Meminimalisir Penyebab Downtime pada Perusahaan Offset Printing." Jurnal Surya Teknika 11, no. 2 (2024): 574–84. https://doi.org/10.37859/jst.v11i2.8205.

Full text

Abstract:

This study analyzes the effectiveness of the Heidelberg SM72-FP machine at CV. XYZ to identify and reduce the factors causing downtime that affect productivity. The evaluation was conducted using the Overall Equipment Effectiveness (OEE) method and the Six Big Losses. This analysis also includes the use of Pareto and fishbone diagrams to determine repair priorities and the main causes of time loss. The research results show that the average OEE value before implementation was 73.30%, below the JIPM standard of 85%. The dominant factor causing losses is reduced speed losses (12.63%). After impl

APA, Harvard, Vancouver, ISO, and other styles

26

Armashova-Telnik, G. S., P. N. Sokolova, and D. V. Degterev. "Additive technologies: an innovative effectdigitalization in industry." Proceedings of the Voronezh State University of Engineering Technologies 82, no. 4 (2021): 347–53. http://dx.doi.org/10.20914/2310-1202-2020-4-347-353.

Full text

Abstract:

The article discusses the integration of additive technologies into production, presents the advantages and disadvantages of 3D metal printing. The data of the current indicators of the effectiveness of technological processes when using 3D equipment are analyzed, the difficulties of introducing additive technologies into production processes are determined. Conclusions on the trends and prospects of development of engineering solutions in the field of additive technologies are formulated. So, additive technologies provide an opportunity for a business entity to reduce production lines, minimi

APA, Harvard, Vancouver, ISO, and other styles

27

Saputra, Muhammad Tamami Dwi, Judi Alhilman, and Nurdinintya Athari. "Performance Evaluation on Printing Machine Goss Universal Using Reliability Availability Maintainability (RAM) Analysis and Overall Equipment Effectiveness (OEE)." International Journal of Innovation in Enterprise System 1, no. 01 (2017): 37–43. http://dx.doi.org/10.25124/ijies.v1i01.10.

Full text

Abstract:

The development of science and technology that has been developed more rapidly at this time, along with the increasing need for information itself. By producing a newspaper every day then the states forced PT Pikiran Rakyat to further improve the smoothness, the effectiveness and efficiency of the printing. One way to measure the performance of machines in general by using OEE and to minimize the possibility of losses to be borne by the company is improving the Reliability, Availability and Maintainability (RAM). By using the data in the form of MTTF (Main Time to Failure) and MTTR (Main Time

APA, Harvard, Vancouver, ISO, and other styles

28

Ласточкин, Д. М., А. А. Медяков, Д. В. Костромин, А. А. Бахтин та К. Д. Семенов. "АНАЛИЗ ПЕРСПЕКТИВЫ ПРИМЕНЕНИЯ 3D-ПЕЧАТИ ПРИ РЕМОНТЕ АВТОМОБИЛЬНОГО ТРАНСПОРТА". ВЕСТНИК ПОВОЛЖСКОГО ГОСУДАРСТВЕННОГО ТЕХНОЛОГИЧЕСКОГО УНИВЕРСИТЕТА. СЕРИЯ: МАТЕРИАЛЫ. КОНСТРУКЦИИ. ТЕХНОЛОГИИ, № 1(25) (13 вересня 2023): 51–65. http://dx.doi.org/10.25686/2542-114x.2023.1.51.

Full text

Abstract:

Аддитивные технологии находят все большее применение в различных направлениях автомобильной промышленности. Ремонт автомобильного транспорта с помощью 3D-печати пластиковых элементов конструкции становится все популярнее. В статье проведен аналитический обзор материалов, связанных с применением технологий 3D-печати в различных направлениях автомобильной промышленности, и дана оценка возможности применения 3D-технологии при ремонте автомобильного транспорта. Материалом для данного анализа стали открытые информационные источники в области аддитивных технологий. Методом исследования являлись сбор

APA, Harvard, Vancouver, ISO, and other styles

29

Sunarsih, Ni Made, Anak Agung Dwi Widyani, Cokorda Putra Wirasutama, and A. A. Sagung Intan Pradnyanita. "PENINGKATAN USAHA BATA PEJATEN SEBAGAI POTENSI PRODUK UNGGULAN DESA PEJATEN." SELAPARANG Jurnal Pengabdian Masyarakat Berkemajuan 3, no. 1 (2019): 86. http://dx.doi.org/10.31764/jpmb.v3i1.1246.

Full text

Abstract:

ABSTRAK UKM dalam kegiatan ini yaitu UKM Surya Nadi yang dimiliki oleh Bapak I Nyoman Sudiarsa. Berdasarkan hasil observasi yang telah dilakukan tim ternyata UKM tersebut memiliki keberlanjutan usaha yang sangat menjanjikan dan membutuhkan pembinaan dan pendampingan. Permasalahan yang ditemukan pada UKM yaitu 1) Peralatan (matris) dan mesin cetak dalam proses produksi banyak yang rusak dan tidak dapat dipakai optimal; 2) Rak pengering dan alas cetak (eled) rusak dan banyak dimakan rayap; 3) Tungku pembakaran dan ruang penampungan bahan bakar (sabut kelapa dankayu bakar) yang sudah mulai tidak

APA, Harvard, Vancouver, ISO, and other styles

30

Freeman, Alix, and Peter Southerden. "Mandibular fracture repair techniques in cats: a dentist’s perspective." Journal of Feline Medicine and Surgery 25, no. 2 (2023): 1098612X2311525. http://dx.doi.org/10.1177/1098612x231152521.

Full text

Abstract:

Practical relevance: Feline head trauma injuries are common in general practice, often resulting in mandibular fracture. An understanding of the recent advances in the field of mandibular fracture repair will facilitate evidence-based decision-making in clinical practice. Clinical challenges: Feline maxillofacial and oral anatomy brings unique challenges in comparison with dogs. It has been commonplace to adapt techniques and equipment that are better suited to other body regions or are species-inappropriate for use in feline maxillofacial surgery, and this has traditionally resulted in high m

APA, Harvard, Vancouver, ISO, and other styles

31

Dektyarev, Alexander V., and Pavel G. Zobov. "A TECHNOLOGY FOR PRODUCING THE SMALL VESSEL HULL BY THE ADDITIVE MANUFACTURING METHODS." Vestnik Gosudarstvennogo universiteta morskogo i rechnogo flota imeni admirala S. O. Makarova 14, no. 4 (2022): 571–82. http://dx.doi.org/10.21821/2309-5180-2022-14-4-571-582.

Full text

Abstract:

The issues of the technological complex for manufacturing the hull of a small vessel obtained using additive manufacturing methods are considered in the paper. The purpose of the work is to study the emerging problems, issues, patterns, rules and norms of the process of 3D-printing the hull of a small vessel. The objectives of the paper include presentation of previously obtained calculated and experimental results for printing and assembling the ship hull; development of a method for assembling a hull using additive technology; comparative analysis of the labor intensity of manufacturing ship

APA, Harvard, Vancouver, ISO, and other styles

32

Berliansyah, Rezha Arlanda, and Khoirunnurofik Khoirunnurofik. "Micro Small Industries Performance Improvement: Analysis of the KUR Program." Economics Development Analysis Journal 12, no. 3 (2023): 381–95. http://dx.doi.org/10.15294/edaj.v12i3.65457.

Full text

Abstract:

MSMEs contribute 61.07% to Indonesia's GDP, but over 40% face capital problems. Kredit Usaha Rakyat, or People’s Business Credit (KUR), is a government program to solve that by giving subsidies through financial institutions to strengthen MSME’s capital. Since 2015, the processing industry sector has been a priority sector of the KUR program, with KUR's realization target Micro Small Industries (MSI) is 40%, and the target continues to rise to 60% in 2019. This study analyzes the KUR program's impact on MSI performance in Indonesia. This study uses secondary cross-section data from the MSI sur

APA, Harvard, Vancouver, ISO, and other styles

33

Ogura, Ichiro, Kiwamu Ashida, and Jun Akedo. "Development of First Production Flaw Detecting System for On-Demand Repair of Large-Scale Circuit." International Journal of Automation Technology 9, no. 5 (2015): 487–93. http://dx.doi.org/10.20965/ijat.2015.p0487.

Full text

Abstract:

To realize an efficient high-mix low-volume production, improving the yield rate by reducing production flaws is an important technique. Manufacturing touch panel displays with large-scale wiring boards is a typical example of the high-mix low-volume production. The National Institute of Advanced Industrial Science and Technology (AIST) has proposed a laser assisted ink-jet printing (LIJ) technology, which can repair the flaws of circuits by a silver nanoparticle ink. To establish an in-process repairing system for a touch panel display, a first production flaw detecting system is necessary in

APA, Harvard, Vancouver, ISO, and other styles

34

Wijana, Susinggih, Panji Deoranto, Abi Karami, Nia Amalia Saputra, and Danniary Ismail Farrony. "Redesigning Kerupuk Atom PackagingAnd Label Of Kube Jaya Abadi And Up2k SawoPengudang Village, Teluk Sebong Sub-District, Bintan District." Journal of Innovation and Applied Technology 7, no. 1 (2021): 1154–60. http://dx.doi.org/10.21776/ub.jiat.2021.007.01.5.

Full text

Abstract:

The processing of fishery products in an effort to increase the economic sector is carried out by the Kelompok Usaha Bersama (Kube) Jaya Abadi and the Usaha Peningkatan Pendapatan Keluarga (UP2K) Sawo located in Pengudang Village, Teluk Sebong Sub-district, Bintan District. One of the problems that occurred in the Kube Jaya Abadi and UP2K Sawo was the packaging and labeling of kerupuk atomthat needed repair. Through the Doktor Mengabdiprogram, the Doktor Mengabdi and Kuliah Kerja Nyata Tematikat Universitas Brawijaya offer packaging and label redesignto increase selling value to become a super

APA, Harvard, Vancouver, ISO, and other styles

35

Hamzah, Hamzah. "Analisis sub sektor industri pengolahan unggulan di Provinsi Kepulauan Bangka Belitung." SOROT 15, no. 2 (2020): 75. http://dx.doi.org/10.31258/sorot.15.2.75-85.

Full text

Abstract:

Penelitian ini bertujuan untuk mengidentifikasi jenis-jenis industri yang menjadi industri pengolahan unggulan di Provinsi Kepulauan Bangka Belitung. Alat analisis yang digunakan adalah analisis Location Quotient dan Analisis Shift Share. Hasil penelitian dari analisi LQ menunjukkan bahwa industri yang menjadi industri unggulan di Provinsi Kepulauan Bangka Belitung antara lain yaitu industri makanan dan minuman, industri karet, barang dari karet dan plastik, industri bahan galian bukan logam, serta industi logam. Sedangkan sub sektor industri pengolahan yang tidak unggul yaitu Industri Tekstil

APA, Harvard, Vancouver, ISO, and other styles

36

Sritharan, Jeavana, Gabriella Christopher, Fanni Eros, and Paul Demers. "O-060 EXPLORING SEX DIFFERENCES IN LUNG CANCER RISK AMONG A LARGE COHORT OF ONTARIO, CANADA WORKERS." Occupational Medicine 74, Supplement_1 (2024): 0. http://dx.doi.org/10.1093/occmed/kqae023.0581.

Full text

Abstract:

Abstract Background While occupational exposures are known to contribute to lung cancer risk, there is less known about sex differences, specifically regarding the risk among female workers. This study aimed to explore sex differences in lung cancer risk across occupational groups, with a focus on female workers. Methods A cohort of approximately 2.37 million workers with lost-time compensation claims were linked to the Ontario Cancer Registry and followed until lung cancer diagnosis, age 85, emigration, death, or end of follow-up (Dec 31, 2020). Cox proportional hazards models were used to es

APA, Harvard, Vancouver, ISO, and other styles

37

Rodigina, Natalya Jurievna, Ofeliia Andranikovna Azarova, Maria Vladimirovna Logina, and Vladislav Igorevich Musikhin. "COVID-19 and digitalization: achieving the goals of UNIDO (UN) and transforming of the labor market." Mezhdunarodnaja jekonomika (The World Economics), no. 2 (February 1, 2021): 124–38. http://dx.doi.org/10.33920/vne-04-2102-04.

Full text

Abstract:

As a result of the COVID-19 pandemic, the world economy has faced not only the problem of maintaining sustainable development and ensuring the well-being of citizens at the same level, but also with a number of problems caused by urgent challenges related to the need to organize remote education and work. As a result, many of the goals that are and were on the agenda of many government associations, organizations and institutions, such as food security, reducing poverty in developing countries, social and gender inequality, have been ‘postponed’ for an indefinite term. Accelerated digitalizati

APA, Harvard, Vancouver, ISO, and other styles

38

Parusov, E. V., I. M. Chuiko, E. V. Oliinyk, and O. V. Parusov. "Analysis of trends and problems of the production of low-carbon Cr-Mo-V steel wire rod and wire for welding purposes." Fundamental and applied problems of ferrous metallurgy, no. 38 (2024): 431–54. https://doi.org/10.52150/2522-9117-2024-38-431-454.

Full text

Abstract:

High temperature resistant structural Cr-Mo and Cr-Mo-V steels have existed for more than a century and have been used with great success in the energy and chemical industries. Typical products for these industries are boilers, heaters, heat exchangers, reactors, gas turbines, hydrocrackers, high pressure vessels, etc. For welding such steels in an environment of protective gases and under a flux using a welding wire diam. 1.2–3.0 mm from low-carbon Cr-Mo-V steels, typical representatives of which include CrMoV1Si or Sv-08KhGSMFA and their analogues and modifications. A separate area of use of

APA, Harvard, Vancouver, ISO, and other styles

39

Diz-Mellado, Eduardo, Jose Perez-Fenoy, Miguel Mudarra-Mata, Carlos Rivera-Gómez, and Carmen Galan-Marin. "Enhancing 3D-Printed Clay Models for Heritage Restoration Through 3D Scanning." Applied Sciences 14, no. 23 (2024): 10898. http://dx.doi.org/10.3390/app142310898.

Full text

Abstract:

Recent development of methodologies based on digital twins through 3D scanning and 3D printing has increased over the past decade, offering new possibilities in manufacturing, production and scaling of models’ applications. However, there are few examples of the application of model digitization technologies for the restoration of ceramic-built heritage by means of 3D modelling. That is why this research focuses on the application of these advanced methodologies to the recovery of architectural ceramic ornamental objects in heritage buildings. Deteriorated ceramic pieces are selected and scann

APA, Harvard, Vancouver, ISO, and other styles

40

Fahmi Azhari and M. Dzikron. "Pengendalian Kualitas Produk Roster Beton dengan Menerapkan Metode New Seven Tools dan Prinsip 5S Studi Kasus di CV Jaya Abadi." Bandung Conference Series: Industrial Engineering Science 2, no. 2 (2022): 292–301. http://dx.doi.org/10.29313/bcsies.v2i2.3790.

Full text

Abstract:

Abstract. In order to fulfill the consumer's right to choose goods and/or services and to obtain these goods and/or services in accordance with the exchange rate and the promised conditions and guarantees, the company must always maintain the quality of the products produced. Therefore, quality control in the company is very necessary. CV Jaya Abadi is one of the producers of concrete roster which in its development is experiencing problems with the level of damage to the concrete roster which is four times higher than other products produced. Therefore, this research was conducted with the ai

APA, Harvard, Vancouver, ISO, and other styles

41

Ulfa Afifah, Alif, Fifi Herni Mustofa, and Ainun Zahra Mustika. "Determining Preventive Maintenance Schedule on Press Machine Components using Age Replacement Methods." E3S Web of Conferences 484 (2024): 01024. http://dx.doi.org/10.1051/e3sconf/202448401024.

Full text

Abstract:

To minimize severe damage and reduce maintenance costs, it is essential to monitor and control the performance decline of machines periodically. Implementing regular preventive maintenance on the machines used in production activities is a key approach to achieve this goal. By performing scheduled maintenance on a regular basis, the strength of the machines can be maintained, ensuring their stability, and facilitating smooth production processes. Notably, the press machine serves as the primary printing equipment for the company’s product manufacturing. Any breakdown in this machine can signif

APA, Harvard, Vancouver, ISO, and other styles

42

Eliseykin, E. I., and V. A. Izotov. "Combined method for manufacturing of pattern equipment." Blanking productions in mechanical engineering (press forging, foundry and other productions), 2023, 147–50. http://dx.doi.org/10.36652/1684-1107-2023-21-4-147-150.

Full text

Abstract:

The new method for manufacturing of wear-resistant patterns by printing a polyamide shell on a desktop 3D printer without heat chamber and heating the table, with further polystyrene and compound filling, is described. The patterns obtained by this method are successfully tested for foundry of Yaroslavl Electric Locomotive Repair Plant in the period of 2022—2023.

APA, Harvard, Vancouver, ISO, and other styles

43

Doraiswamy, Anand, Jan Sumerel, Jonathan Wilker, and Roger J. Narayan. "Inkjet Printing of Biomedical Adhesives." MRS Proceedings 950 (2006). http://dx.doi.org/10.1557/proc-0950-d12-05.

Full text

Abstract:

ABSTRACTSynthetic adhesives have largely displaced natural adhesives in the automotive, aerospace, biomedical, electronic, and marine equipment industries over the past century. We have demonstrated the thin film deposition of biological adhesives using piezoelectric inkjet technology. A MEMS based piezoelectric actuator was controlled to jet uniform fluid flow of the adhesive solution through the ink jet nozzles. Microscopic deposition of adhesives enables improved bonding for a range of advanced electronic and biomedical applications. By printing such small and spatially aligned drops, bond

APA, Harvard, Vancouver, ISO, and other styles

44

DINESH, KRISHNAA S. "Beyond 3D: The Revolutionary Potential of 4D Printing." May 24, 2023. https://doi.org/10.5281/zenodo.8108207.

Full text

Abstract:

3D printing is a revolutionary technology for developing complex production systems. Significant advancements in 3D printing technology in terms of materials, equipment, and methods have been developed, with the potential to significantly transform everything from our everyday lives to the global economy. In this context, 4D printing technology introduces a fourth dimension of time while remaining identical to 3D printing technology. The idea behind 4D printing is the creation of intricate three-dimensional structures with the capacity to change their appearance in response to various environm

APA, Harvard, Vancouver, ISO, and other styles

45

Zhou, Xue, Yichen Luo, Yuanzhong Gao, et al. "Development and application of a mechanical arm-based in situ 3D bioprinting method for the repair of skin wounds." Discover Applied Sciences 6, no. 8 (2024). http://dx.doi.org/10.1007/s42452-024-06043-5.

Full text

Abstract:

AbstractCurrent treatments for skin wounds typically involve multiple surgical procedures that require complex processes and expensive costs, making it difficult to achieve timely treatment in field environments. We developed an innovative in situ printing method, utilizing robotic arm control, to address the significant challenges of large-scale skin wound repair resulting from natural disasters such as earthquakes, fires, and explosions during relief efforts. Our portable 3D printing equipment, which integrates debridement, precise 3D scanning and modeling of wounds, and compatibility with c

APA, Harvard, Vancouver, ISO, and other styles

46

Nikul, S., V. Kupelskyi, and I. Kushner. "CURRENT ISSUES IN 3D PRINTING CONTROL METHODS FOR UNMANNED AERIAL VEHICLES PRODUCTS." Collection of scientific works of Odesa Military Academy, December 25, 2024, 68–74. https://doi.org/10.37129/2313-7509.2024.22.8.

Full text

Abstract:

Today, it is already quite clear that the adoption of additive technologies necessitates adjustments to the design principles of unmanned aerial vehicles (UAV), the development of printing technologies, the use of new construction strategies, and the creation of a stock of spare parts and components. Therefore, the assessment of the quality control of products printed on 3D printers is an important element of modern UAV, especially when selecting components. The UAVs repair system in field conditions must ensure complete coverage of all faulty samples, high reliability quality indicators of th

APA, Harvard, Vancouver, ISO, and other styles

47

Yeon, Jaeheum, and Julian Kang. "SPALL REPAIR USING A 3D PRINTER AND EPOXY RESIN ADHESIVE." Proceedings of International Structural Engineering and Construction 4, no. 1 (2017). http://dx.doi.org/10.14455/isec.res.2017.213.

Full text

Abstract:

The spall repair sequence currently used is as follows. The damage is removed from the area with heavy equipment and fresh concrete is poured into the cleaned section. A curing compound is then applied to the patch to prevent drying shrinkage or to absorb water. But this spall repair method requires a great deal of equipment and time. During the repair process, adjacent roads must be closed in order to secure a working space, often resulting in traffic congestion. According to a report by the US Department of Transportation, the depreciation can be up to $20,000 a day due to traffic jams. The

APA, Harvard, Vancouver, ISO, and other styles

48

Yuan, Ximin, Zhenjia Wang, Lixin Che, et al. "Recent developments and challenges of 3D bioprinting technologies." International Journal of Bioprinting, January 27, 2024, 1752. http://dx.doi.org/10.36922/ijb.1752.

Full text

Abstract:

Three-dimensional (3D) bioprinting technologies play significant roles in various facets of the medical field, such as bioengineering, tissue repair, scaffolds, biomedical devices, and drug. As a versatile manufacturing technology, 3D bioprinting is able to overcome the constraints of other conventional methods and shows potential for future advancements in the field of biology. Nevertheless, the existing 3D bioprinting technologies still grapple with significant challenges in materials, equipment, and applications. Therefore, it is essential to select appropriate bioprinting method in alignme

APA, Harvard, Vancouver, ISO, and other styles

49

Chen, Daobing, Zhiwu Han, Junqiu Zhang, Longjian Xue, and Sheng Liu. "Additive Manufacturing Provides Infinite Possibilities for Self‐Sensing Technology." Advanced Science, May 20, 2024. http://dx.doi.org/10.1002/advs.202400816.

Full text

Abstract:

AbstractIntegrating sensors and other functional parts in one device can enable a new generation of integrated intelligent devices that can perform self‐sensing and monitoring autonomously. Applications include buildings that detect and repair damage, robots that monitor conditions and perform real‐time correction and reconstruction, aircraft capable of real‐time perception of the internal and external environment, and medical devices and prosthetics with a realistic sense of touch. Although integrating sensors and other functional parts into self‐sensing intelligent devices has become increas

APA, Harvard, Vancouver, ISO, and other styles

50

Abbas, PhD, Muhammad Zaheer. "Patent Law and 3D Printing Applications in Repairing Medical Equipment: Australia Needs To Adopt an Explicit Right to Repair Exemption." SSRN Electronic Journal, 2023. http://dx.doi.org/10.2139/ssrn.4525038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!