Relevant bibliographies by topics / Printing industry

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Printing industry'

Author: Grafiati
Published: 4 June 2021
Last updated: 29 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Printing industry.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Printing industry"

1

Park, Sehwan. "3D Printing Industry Trends." International Journal of Advanced Culture Technology 2, no. 1 (June 30, 2014): 30–32. http://dx.doi.org/10.17703/ijact.2014.2.1.030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kitayama, Takuo. "Trends of Printing Industry." JAPAN TAPPI JOURNAL 55, no. 12 (2001): 1722–30. http://dx.doi.org/10.2524/jtappij.55.1722.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ainul, Amri Lala Hucadinota, Noor Azly Mohammed Ali, and Rusmadiah Anwar. "Indonesian Printing Industry Profile." Environment-Behaviour Proceedings Journal 7, SI7 (August 31, 2022): 221–25. http://dx.doi.org/10.21834/ebpj.v7isi7.3786.

Full text
Abstract:
This study aims to determine the profile of the printing industry from the point of view of the factors that influence the success of the industry. The influencing factors are marketing and sales and government regulations. Data were collected using the documentation method from literature and regulatory studies and analyzed by using qualitative data triangulation techniques. The results show that the profile of the printing industry in Indonesia is unique in terms of industrial classification. This is following applicable government regulations. Marketing and sales aspects show good results based on empirical studies of government reports. From the analysis, it can be seen that clarity of government regulations is needed for the sustainability and success of this industry to support the national agenda. Keywords: Printing; Industry; Profile; Industry Classification. eISSN: 2398-4287 © 2022. The Authors. Published for AMER ABRA cE-Bs by e-International Publishing House, Ltd., UK. This is an open access article under the CC BYNC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia. DOI: https://doi.org/10.21834/ebpj.v7iSI7%20(Special%20Issue).3786
APA, Harvard, Vancouver, ISO, and other styles
4

Tsukada, Masuo. "The view of the printing industry and relationship between the papermaking industry and the printing industry." JAPAN TAPPI JOURNAL 45, no. 3 (1991): 317–28. http://dx.doi.org/10.2524/jtappij.45.317.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schwartz, Kathryn A. "THE POLITICAL ECONOMY OF PRIVATE PRINTING IN CAIRO AS TOLD FROM A COMMISSIONING DEAL TURNED SOUR, 1871." International Journal of Middle East Studies 49, no. 1 (January 20, 2017): 25–45. http://dx.doi.org/10.1017/s0020743816001124.

Full text
Abstract:
AbstractThis article examines the political economy of Cairo's emerging Arabic private printing industry during the third quarter of the 19th century. I use the constituent texts of the industry to demonstrate that it developed upon the speculative model of commissioning, whereby individuals paid printers to produce particular works of their choosing. Commissioning indicates that Egyptian private printing grew from local traditions for producing handwritten texts. Nevertheless, print commissioning differed from manuscript commissioning by requiring individuals to assume great financial risk. I explore the nature and implications of this divergence through a treatise published in 1871 by Musa Kastali, a particularly prolific printer who helped to professionalize Cairene printing. Musa's treatise details his legal battle with a famous Azhari commissioner, and is unique for describing a printer's business practices. It demonstrates the importance of situating printings within their socioeconomic contexts in addition to their intellectual ones, a task which cannot be done without an appreciation for the functioning of the printing industry at a local level.
APA, Harvard, Vancouver, ISO, and other styles
6

Pawlak, Dariusz, and Piotr Boruszewski. "Digital printing in wood industry." Annals of WULS, Forestry and Wood Technology 109 (March 31, 2020): 109–15. http://dx.doi.org/10.5604/01.3001.0014.3419.

Full text
Abstract:
Digital printing in wood industry. The article presents modern techniques for surface finishing of wood-based panels, including the dynamically developing digital printing technology. The basic technological factors affecting the result of the digital printing process are discussed, and advantages and disadvantages of different types of this technology are presented.
APA, Harvard, Vancouver, ISO, and other styles
7

Ghosh, B., and S. Karmakar. "3D Printing Technology and Future of Construction: A Review." IOP Conference Series: Earth and Environmental Science 1326, no. 1 (June 1, 2024): 012001. http://dx.doi.org/10.1088/1755-1315/1326/1/012001.

Full text
Abstract:
Abstract Historically characterised by its labour-intensive nature and low productivity, the construction industry is witnessing a technological revolution. Among these advancements, 3D printing stands out as a frontrunner, offering the potential to automate construction processes, reduce material waste, shorten project timelines, and mitigate risks associated with manual labour. This study explores the transformative capacity of large-scale 3D printing in construction, examining current progress, potential trajectories, and inherent limitations. Furthermore, it assesses the impact of expanded 3D printing adoption on the construction labour market. Our findings highlight 3D printing’s potential to significantly diminish the need for manual labour, addressing labour shortages, particularly in countries reliant on immigrant labour forces. However, its effectiveness may vary in regions with competitive labour costs where manual labour remains prevalent. Integrating 3D printing in construction necessitates cultivating a specialised workforce with expertise in this innovative technology. In conclusion, this study underscores the transformative influence of 3D printing in construction, offering increased efficiency, reduced labour dependency, and solutions to industry challenges. Adapting 3D printing adoption to regional labour dynamics and workforce upskilling is essential for maximising its benefits. As the construction industry evolves, embracing 3D printing emerges as a pivotal factor in shaping its future landscape.
APA, Harvard, Vancouver, ISO, and other styles
8

Gu, Wen Juan, Ying Li, and Xiao Hui Zhang. "Printing Industry and the Environment." Advanced Materials Research 663 (February 2013): 759–62. http://dx.doi.org/10.4028/www.scientific.net/amr.663.759.

Full text
Abstract:
Development of green economy is the only way to relieve the restriction of resource, which is the effective and important way to improve economical benefit radically. Only in this way can continuable development be achieved. The research on pollution in printing industry was reported in this paper. The general pollutant such as solvents, exhaust gas, ink, and etc were summarized. The existing methods, measures and technologies which could solve or relieve the pollution of the printing industry on the environment were brought forward. The suggestions were advanced from country, enterprise, individual to science development aspects. The prospect would be fine with the efforts of the government, enterprise and human being.
APA, Harvard, Vancouver, ISO, and other styles
9

MATSUOKA, Riki. "Printing Inks for Electronics Industry." Journal of Japan Oil Chemists' Society 35, no. 10 (1986): 835–42. http://dx.doi.org/10.5650/jos1956.35.835.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nethercott, James R. "Dermatitis in the Printing Industry." Dermatologic Clinics 6, no. 1 (January 1988): 61–66. http://dx.doi.org/10.1016/s0733-8635(18)30690-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Printing industry"

1

Age, Philip D. Rhodes Dent. "An instructional design model for training prepress craft workers in the printing and publishing industry." Normal, Ill. Illinois State University, 1999. http://wwwlib.umi.com/cr/ilstu/fullcit?p9942641.

Full text
Abstract:
Thesis (Ed. D.)--Illinois State University, 1999.
Title from title page screen, viewed July 21, 2006. Dissertation Committee: Dent M. Rhodes (chair), G. Thomas Baer, James L. Bradford, Fay F. Bowren. Includes bibliographical references (leaves 144-156) and abstract. Also available in print.
APA, Harvard, Vancouver, ISO, and other styles
2

Au-Yeung, Man-ki Chantel. "Prospect of printing industry in Hong Kong towards 2000' /." Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19876269.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Granath, Victor. "3D Printing for Computer Graphics Industry." Thesis, Högskolan i Gävle, Avdelningen för Industriell utveckling, IT och Samhällsbyggnad, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-10439.

Full text
Abstract:
Rapid prototyping is a relativity new technology and is based on layered manufacturing which has similarities to the method an ordinary desktop paper printer works. This research is to obtain a better understanding on how to use computer graphics software, in this particular case Autodesk Maya, to create a model. The goal is to understand how to create a suitable mesh of a 3D model for use with a 3D printer and produce a printed model that is equivalent to the CAD software 3D model. This specific topic has not been scientifically documented which has resulted in an actual 3D model.
APA, Harvard, Vancouver, ISO, and other styles
4

Chow, Yuen Wai. "A study of offshore printing between the United States and China /." Link to online version, 2006. https://ritdml.rit.edu/dspace/handle/1850/1952.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Veconi, Craig Eric. "A survey of quality awareness within the commercial printing industry /." Online version of thesis, 1989. http://hdl.handle.net/1850/11496.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bjurstedt, Anders. "The European publication printing industry : an industry in profound changes /." Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-563.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kokubun, Ryan Yoshido. "Forecasting cloud computing for the printing industry." Click here to view, 2010. http://digitalcommons.calpoly.edu/grcsp/14/.

Full text
Abstract:
Thesis (B.S.)--California Polytechnic State University, 2010.
Project advisor: Harvey Levenson. Title from PDF title page; viewed on Apr. 20, 2010. Includes bibliographical references. Also available on microfiche.
APA, Harvard, Vancouver, ISO, and other styles
8

Leines, Kevin B. "The influence of the position of a color control bar on a form when determining the most appropriate location to measure variability in solid ink density and dot gain of a printed product /." Online version of thesis, 1990. http://hdl.handle.net/1850/10926.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hedman, Jonas. "A study of company-initiated training in US and Swedish printing firms relative to prepress, press, and finishing operations /." Online version of thesis, 2003. http://hdl.handle.net/1850/12188.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Unuigbey, Oloruntoba P. (Oloruntoba Phillip). "Analysis of Job Prospects and the Relevance of Printing Education to the Printing Industry: A Case of Nigeria." Thesis, University of North Texas, 1992. https://digital.library.unt.edu/ark:/67531/metadc279356/.

Full text
Abstract:
The overall purpose of this study was to determine the job prospects and relevance of printing education to the printing industry. The study was conducted in four Nigerian cities—Lagos, Kaduna, Kano and Benin City.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Printing industry"

1

Chapman, David. The printing industry. London: Comedia, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

(Firm), Leading Edge Reports, ed. The printing ink industry: Industry study. [Cleveland Hts., Ohio: Leading Edge Reports, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sandhu, Kamalpreet, and Sunpreet Singh, eds. Food Printing: 3D Printing in Food Industry. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8121-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pira, ed. UK printing industry statistics. Leatherhead: Pira, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Association, Printing Industries Research, ed. UK printing industry statistics. Leatherhead: PIRA, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

PIRA, ed. UK printing industry statistics. Leatherhead: PIRA, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Isaacson, Bob. Minnesota's printing & publishing industry. St. Paul: Minnesota Dept. of Trade and Economic Development, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Canada. Industry, Science and Technology Canada. Commercial printing. Ottawa: Industry, Science and Technology Canada, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nichols, J. W. L. Accounting in the printing industry. London: Chartered Institute of Management Accountants, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Forum, Southwark Printing. The printing industry in Southwark. London: Southwark Trade Union Support Unit and London Borough of Southwark jobs and industry committee, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Printing industry"

1

Hill, John. "Digital Printing." In The British Newspaper Industry, 153–61. London: Palgrave Macmillan UK, 2016. http://dx.doi.org/10.1007/978-1-137-56897-7_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Couturier, Maurice. "The printing industry." In Textual Communication, 1–51. London: Routledge, 2021. http://dx.doi.org/10.4324/9781003157144-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Stavropoulos, Panagiotis, Harry Bikas, Thanassis Souflas, Konstantinos Tzimanis, Christos Papaioannou, and Nikolas Porevopoulos. "Additive Manufacturing in the Automotive Industry." In 3D Printing, 453–70. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003296676-29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

van Dijken, Koos, Yvonne Prince, Teun Wolters, Marco Frey, Giuliano Mussati, Paul Kalff, Ole Hansen, et al. "Printing industry (pre-press)." In Adoption of Environmental Innovations, 129–56. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-007-0854-9_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Singh, Harmanpreet, and Sagarika Bhattacharjee. "Fundamentals of Food Printing." In Food Printing: 3D Printing in Food Industry, 19–34. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8121-9_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gunjal, Mahendra, Prasad Rasane, Jyoti Singh, Sawinder Kaur, and Jaspreet Kaur. "Three-Dimensional (3D) Food Printing: Methods, Processing and Nutritional Aspects." In Food Printing: 3D Printing in Food Industry, 65–80. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8121-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kour, Rasleen, and Harmanpreet Singh. "Food Printing: Unfolding a New Paradigm for Designer and User." In Food Printing: 3D Printing in Food Industry, 47–63. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8121-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Singh, Divya, Seema Ramniwas, and Ranvijay Kumar. "Development of Cost-Effective and Sustainable Alternative Protein from Drosophila and Consumer Acceptability of Drosophila Protein Using 3D Printing." In Food Printing: 3D Printing in Food Industry, 141–54. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8121-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kaur, Jaspreet, Vishesh Bhadariya, Jyoti Singh, Prerna Gupta, Kartik Sharma, and Prasad Rasane. "Materials for Food Printing." In Food Printing: 3D Printing in Food Industry, 1–18. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8121-9_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Morya, Sonia, Jaysi Kumari, Devendra Kumar, Ashikujaman Syed, and Chinaza Godswill Awuchi. "Three-Dimensional (3D) Printing Technology: 3D Printers, Technologies, and Application Insights in the Food Diligence." In Food Printing: 3D Printing in Food Industry, 81–100. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8121-9_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Printing industry"

1

Sahana, V. W., and G. T. Thampi. "3D printing technology in industry." In 2018 2nd International Conference on Inventive Systems and Control (ICISC). IEEE, 2018. http://dx.doi.org/10.1109/icisc.2018.8399128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fehn, Thomas R. "Status and recent trends in 3D Printing." In SPIE Photonics West Industry Events. SPIE, 2021. http://dx.doi.org/10.1117/12.2595750.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wenjin, Wu, and Tor Shu Beng. "3D Printing for Marketing and Advertisement Industry." In 1st International Conference on Progress in Additive Manufacturing. Singapore: Research Publishing Services, 2014. http://dx.doi.org/10.3850/978-981-09-0446-3_103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hennig, Guido, Markus Resing, Stefan Mattheus, Beat Neuenschwander, and Stephan Brüning. "Laser Microstructuring and Processing in Printing Industry." In CLEO: Applications and Technology. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/cleo_at.2011.amd4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Amri, Lala, Dinesh Farani, Noor Ali, and Rusmadiah Anwar. "The Challenges and Strategies of Printing Industry." In Proceedings of the First Jakarta International Conference on Multidisciplinary Studies Towards Creative Industries, JICOMS 2022, 16 November 2022, Jakarta, Indonesia. EAI, 2022. http://dx.doi.org/10.4108/eai.16-11-2022.2326107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Riyanto and Della Amalia. "Treatment of printing industry waste using distillation method." In 3RD INTERNATIONAL CONFERENCE ON CHEMISTRY, CHEMICAL PROCESS AND ENGINEERING (IC3PE). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0062378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ganetsos, Theodoros, Andreas Kantaros, Nikolaos Gioldasis, and Konstantinos Brachos. "Applications of 3D Printing and Illustration in Industry." In 2023 17th International Conference on Engineering of Modern Electric Systems (EMES). IEEE, 2023. http://dx.doi.org/10.1109/emes58375.2023.10171656.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhou, Yihua, Shuguang Sang, Bin Wang, and Cheng yu Wang. "Application of 3D printing in tire mold industry." In Second International Conference on Advanced Manufacturing Technology and Manufacturing System (ICAMTMS 2023), edited by Bin Yu and Yun Wang. SPIE, 2023. http://dx.doi.org/10.1117/12.2689336.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Santos, Sérgio, and Vítor Santos. "3D Printing – Adoption Perspectives in the Portuguese Industry." In 16ª Conferência da Associação Portuguesa de Sistemas de Informação. Associação Portuguesa de Sistemas de Informação, APSI, 2016. http://dx.doi.org/10.18803/capsi.v16.193-201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Hejie, and Xiaozhang Huang. "Utilizing Service Science to Construct Green Printing Industry." In 2012 National Conference on Information Technology and Computer Science. Paris, France: Atlantis Press, 2012. http://dx.doi.org/10.2991/citcs.2012.46.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Printing industry"

1

Sun, Lushan, and Sheng Lu. The 3D Printing Era: A Conceptual Model for the Textile and Apparel Industry. Ames: Iowa State University, Digital Repository, November 2015. http://dx.doi.org/10.31274/itaa_proceedings-180814-1171.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Corral, Laura C., Kaitlyn J. Walker, Stephanie K. Hubert, Kathleen R. Smith, and Lance M. Cheramie. Exploring the Abilities of 3D Printing and its Viability for Consumption in the Fashion Industry. Ames: Iowa State University, Digital Repository, 2017. http://dx.doi.org/10.31274/itaa_proceedings-180814-1924.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yu, Yanan, Gwia Kim, and Kavita Mathur. Integrating Three-Dimensional Printing With Shape Memory Material: A Renovation of Mass Customization in the Fashion Industry. Ames (Iowa): Iowa State University. Library, January 2019. http://dx.doi.org/10.31274/itaa.8868.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Slattery, Kevin, and Eliana Fu. Unsettled Issues in Additive Manufacturing and Improved Sustainability in the Mobility Industry. SAE International, July 2021. http://dx.doi.org/10.4271/epr2021015.

Full text
Abstract:
Additive manufacturing (AM), also known as “3D printing,” is often touted as a sustainable technology, especially for metal components, since it produces either net or near-net shapes versus traditionally machined pieces from larger mill products. While traditional machining from mill products is often the case in aerospace, most of the metal parts used in the world are made from flat-rolled metal and are quite efficient in utilization. Additionally, some aspects of the AM value chain are often not accounted for when determining sustainability. Unsettled Issues in Additive Manufacturing and Improved Sustainability in the Mobility Industry uses a set of scenarios to compare the sustainability of parts made using additive and conventional technologies for both the present and future (2040) states of manufacturing.
APA, Harvard, Vancouver, ISO, and other styles
5

Slattery, Kevin, and Jennifer Coyne. Metal Additive Manufacturing in the Mobility Industry: Looking into 2033. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, September 2023. http://dx.doi.org/10.4271/epr2023022.

Full text
Abstract:
<div class="section abstract"><div class="htmlview paragraph">Now that metal additive manufacturing (MAM), also known as “metal 3D printing,” has seen its first successful implementations across the mobility industry, the question is whether it will continue to grow beyond these initial applications or remain a niche manufacturing process. Moving to broader applications will require overcoming several barriers, namely cost and rate, size, and criticality limitations. Recent progress in MAM indicates that these barriers are beginning to come down, pointing to continued growth in applications for MAM through the end of the decade and beyond.</div><div class="htmlview paragraph"><b>Metal Additive Manufacturing in the Mobility Industry: Looking into 2033 </b> discusses the obstacles to future MAM growth, how they can be conquered, and what its role in the mobility industry will look like in 2033.</div><div class="htmlview paragraph"><a href="https://www.sae.org/publications/edge-research-reports" target="_blank">Click here to access the full SAE EDGE</a><sup>TM</sup><a href="https://www.sae.org/publications/edge-research-reports" target="_blank"> Research Report portfolio.</a></div></div>
APA, Harvard, Vancouver, ISO, and other styles
6

Slattery, Kevin. Unsettled Topics on the Benefit of Additive Manufacturing for Production at the Point of Use in the Mobility Industry. SAE International, February 2021. http://dx.doi.org/10.4271/epr2021006.

Full text
Abstract:
An oft-cited benefit of additive manufacturing (AM), or “3D-printing,” technology is the ability to produce parts at the point of use by downloading a digital file and making the part at a local printer. This has the potential to greatly compress supply chains, lead times, inventories, and design iterations for custom parts. As a result of this, both manufacturing and logistics companies are investigating and investing in AM capacity for production at the point of use. However, it can be imagined that the feasibility and benefits are a function of size, materials, build time, manufacturing complexity, cost, and competing technologies. Because of this, there are instances where the viability of point-of-use manufacturing ranges from the perfect solution to the worst possible choice. Unsettled Topics on the Benefits of Additive Manufacturing for Production at the Point of Use in the Mobility Industry discusses the benefits, challenges, trade-offs, and other determining factors regarding this new level of AM possibilities.
APA, Harvard, Vancouver, ISO, and other styles
7

Short, Samuel, Bernhard Strauss, and Pantea Lotfian. Emerging technologies that will impact on the UK Food System. Food Standards Agency, June 2021. http://dx.doi.org/10.46756/sci.fsa.srf852.

Full text
Abstract:
Rapid technological innovation is reshaping the UK food system in many ways. FSA needs to stay abreast of these changes and develop regulatory responses to ensure novel technologies do not compromise food safety and public health. This report presents a rapid evidence assessment of the emerging technologies considered most likely to have a material impact on the UK food system and food safety over the coming decade. Six technology fields were identified and their implications for industry, consumers, food safety and the regulatory framework explored. These fields are: Food Production and Processing (indoor farming, 3D food printing, food side and byproduct use, novel non-thermal processing, and novel pesticides); Novel Sources of Protein, such as insects (for human consumption, and animal feedstock); Synthetic Biology (including lab-grown meat and proteins); Genomics Applications along the value chain (for food safety applications, and personal “nutrigenomics”); Novel Packaging (active, smart, biodegradable, edible, and reusable solutions); and, Digital Technologies in the food sector (supporting analysis, decision making and traceability). The report identifies priority areas for regulatory engagement, and three major areas of emerging technology that are likely to have broad impact across the entire food industry. These areas are synthetic biology, novel food packaging technologies, and digital technologies. FSA will need to take a proactive approach to regulation, based on frequent monitoring and rapid feedback, to manage the challenges these technologies present, and balance increasing technological push and commercial pressures with broader human health and sustainability requirements. It is recommended FSA consider expanding in-house expertise and long-term ties with experts in relevant fields to support policymaking. Recognising the convergence of increasingly sophisticated science and technology applications, alongside wider systemic risks to the environment, human health and society, it is recommended that FSA adopt a complex systems perspective to future food safety regulation, including its wider impact on public health. Finally, the increasing pace of technological
APA, Harvard, Vancouver, ISO, and other styles
8

Slattery, Kevin T. Unsettled Aspects of the Digital Thread in Additive Manufacturing. SAE International, November 2021. http://dx.doi.org/10.4271/epr2021026.

Full text
Abstract:
In the past years, additive manufacturing (AM), also known as “3D printing,” has transitioned from rapid prototyping to making parts with potentially long service lives. Now AM provides the ability to have an almost fully digital chain from part design through manufacture and service. Web searches will reveal many statements that AM can help an organization in its pursuit of a “digital thread.” Equally, it is often stated that a digital thread may bring great benefits in improving designs, processes, materials, operations, and the ability to predict failure in a way that maximizes safety and minimizes cost and downtime. Now that the capability is emerging, a whole series of new questions begin to surface as well: •• What data should be stored, how will it be stored, and how much space will it require? •• What is the cost-to-benefit ratio of having a digital thread? •• Who owns the data and who can access and analyze it? •• How long will the data be stored and who will store it? •• How will the data remain readable and usable over the lifetime of a product? •• How much manipulation of disparate data is necessary for analysis without losing information? •• How will the data be secured, and its provenance validated? •• How does an enterprise accomplish configuration management of, and linkages between, data that may be distributed across multiple organizations? •• How do we determine what is “authoritative” in such an environment? These, along with many other questions, mark the combination of AM with a digital thread as an unsettled issue. As the seventh title in a series of SAE EDGE™ Research Reports on AM, this report discusses what the interplay between AM and a digital thread in the mobility industry would look like. This outlook includes the potential benefits and costs, the hurdles that need to be overcome for the combination to be useful, and how an organization can answer these questions to scope and benefit from the combination. This report, like the others in the series, is directed at a product team that is implementing AM. Unlike most of the other reports, putting the infrastructure in place, addressing the issues, and taking full advantage of the benefits will often fall outside of the purview of the product team and at the higher organizational, customer, and industry levels.
APA, Harvard, Vancouver, ISO, and other styles
9

NIOSH hazard controls HC15 - control of ergonomic hazards from squeegee handles in the screen- printing industry. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, June 1997. http://dx.doi.org/10.26616/nioshpub97137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

MATERIAL PROPERTIES AND LOCAL STABILITY OF WAAM STAINLESS STEEL PLATES WITH DIFFERENT DEPOSITION RATES. The Hong Kong Institute of Steel Construction, August 2022. http://dx.doi.org/10.18057/icass2020.p.244.

Full text
Abstract:
Wire arc additive manufacturing (WAAM) has significant potential to produce freeform, but structurally efficient geometries out of stainless steel, for use in the construction industry, however, there is currently no standardisation of the manufacturing parameters used to produce WAAM structures. This paper discusses an experimental programme carried out on WAAM 316L stainless steel plated structures to assess the effects of the deposition rate, which is directly associated with productivity. This programme comprises tensile tests on coupons extracted along different printing directions, geometric imperfection measurement (including surface roughness, waviness and overall out-of-straightness), and stub column tests designed to determine the local stability of unstiffened plates manufactured with different deposition rates. The applicability of current Eurocode design rules for stainless steel structures, including the ductility requirements and effective width equations, have been assessed based on the obtained experimental data.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Printing industry' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography