Relevant bibliographies by topics / Printing method

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Printing method'

Author: Grafiati
Published: 15 June 2024
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Printing method.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Printing method"

1

Phillips, Michael. "“Printing in the infernal method”: William Blake’s method of “Illuminated Printing”." Interfaces, no. 39 (July 1, 2018): 67–89. http://dx.doi.org/10.4000/interfaces.489.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Ni, Qiang Wang, Ping Yang, and Jun Long Xu. "Research on the Evaluation of Digital Prints Quality Based on Noise." Applied Mechanics and Materials 731 (January 2015): 222–27. http://dx.doi.org/10.4028/www.scientific.net/amm.731.222.

Full text
Abstract:
With the development of digital printing, the needs for evaluating digital printing increase. In this study, the factors affecting the quality of digital prints are analyzed, and a set of digital prints noise detection system, test charts and evaluation methods are established by decoding the formation mechanism of the noise. Experiments showed that the noise had been affected by the type of paper, the image forming method of digital printing, the toner particles closely related in particular. As a result, this study can be used to select and optimize the printing’s outputting resolution to en
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Minhua, Xin-guang Lv, Xiao-jie Liu, and Jia-qing Zhang. "Research on color 3D printing based on color adherence." Rapid Prototyping Journal 24, no. 1 (2018): 37–45. http://dx.doi.org/10.1108/rpj-07-2016-0112.

Full text
Abstract:
Purpose This paper aims to present a method of color three-dimensional (3D) printing based on color adherence. Design/methodology/approach First, experiments of the color effects of 3D printings using different carriers and different printing methods were performed. Second, the color of a specific point could be calculated through a theory of dimension-reducing, and the color distribution of 3D model was transformed from 3D to 1D color line corresponding with 3D print sequence. At last, the color lines, which were printed on a PE film by silk-screen printing, was carried by a filament and then
APA, Harvard, Vancouver, ISO, and other styles
4

Peng Liu, Peng Liu, Ning Zhao Ning Zhao, Linghui Ren Linghui Ren, and Qianqian Xu Qianqian Xu. "Color restoration method of printing in machine visual detection." Chinese Optics Letters 12, s1 (2014): S11501–311506. http://dx.doi.org/10.3788/col201412.s11501.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shen, Xiaoqiang, Zhiheng Yu, Fengli Huang, Jinmei Gu, and Hui Zhang. "Fabrication of 3D microstructures for flexible pressure sensors based on direct-writing printing." AIP Advances 12, no. 10 (2022): 105205. http://dx.doi.org/10.1063/5.0107003.

Full text
Abstract:
Microstructure plays an important role in improving the performance of flexible sensors. Changing the shape of the dielectric layer microstructure is an effective countermeasure to promote the sensitivity of capacitive sensors. Nevertheless, traditional microstructure fabrication methods have high manufacturing costs, cumbersome manufacturing processes, and single structure manufacturing, which restrict the development of flexible sensors. In this work, electro-hydro-dynamic (EHD) printing method and aerosol jet (AJ) printing method were applied to fabricate 3D microstructures, in a manner of
APA, Harvard, Vancouver, ISO, and other styles
6

Phung, Thanh-Huy. "An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed." NIP & Digital Fabrication Conference 33, no. 1 (2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.126.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Phung, Thanh-Huy. "An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed." NIP & Digital Fabrication Conference 33, no. 1 (2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.1.art00030_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vaganov, A. V., S. S. Shemelyunas, A. A. Shvedunenko, and A. M. Makarov. "3D PRINTING TIME REDUCTION METHOD." Izvestia Volgograd State Technical University, no. 3 (2022): 47–49. http://dx.doi.org/10.35211/1990-5297-2022-3-262-47-49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Phillips, Michael. ""Printing in the Infernal Method"." Interfaces 30, no. 1 (2010): 21–34. http://dx.doi.org/10.3406/inter.2010.1369.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Adafi Imtiyaz Abiyyi, Erlina Erlina, and Ahmad Faisol. "Analysis of Business Strategy Using SWOT and QSPM Method at Topten Printing in Metro City." Harmony Management: International Journal of Management Science and Business 2, no. 2 (2025): 14–28. https://doi.org/10.70062/harmonymanagement.v2i2.218.

Full text
Abstract:
This study examines Topten Printing, a printing company based in Metro City that offers diverse printing services characterized by competitive pricing, high-quality output, and efficient service. The research addresses the challenge of sustaining competitiveness amid rising market competition and evolving customer preferences. The objective is to analyze the company’s existing competitive strategies and propose viable alternatives for future growth. Employing a qualitative approach through a case study method, the research utilizes SWOT analysis and the Quantitative Strategic Planning Matrix (
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Printing method"

1

Kanani, Chirantan. "Cell Printing: A novel method to seed cells onto biological scaffolds." Digital WPI, 2012. https://digitalcommons.wpi.edu/etd-theses/332.

Full text
Abstract:
Bioprinting, defined as depositing cells, extracellular matrices and other biologically relevant materials in user-defined patterns to build tissue constructs de novo or to build upon pre-fabricated scaffolds, is among one of the most promising techniques in tissue engineering. Among the various technologies used for Bioprinting, pressure driven systems are most conducive to preserving cell viability. Herein, we explore the abilities of a novel bioprinter - Digilab, Inc.'s prototype cell printer. The prototype cell printer (Digilab Inc., Holliston, MA) is an automated liquid handling device ca
APA, Harvard, Vancouver, ISO, and other styles
2

Holeman, Tara. "The Systematic Approach to Microplotter Printing of Perovskite Precursors." Ohio University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1534795066623052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bishop, Craig, Ian Armstrong, and Rolando Navarette. "A Novel Method for 3D Printing High Conductivity Alloys for UHF Applications." International Foundation for Telemetering, 2014. http://hdl.handle.net/10150/577400.

Full text
Abstract:
ITC/USA 2014 Conference Proceedings / The Fiftieth Annual International Telemetering Conference and Technical Exhibition / October 20-23, 2014 / Town and Country Resort & Convention Center, San Diego, CA<br>Traditional approaches to constructing 3D structural electronics with conductive and dielectric materials include ink-jet printed, silver-bearing ink and fine copper wire meshes. One approach combines stereo-lithographic 3D-printed photo-polymers with direct-printed silver-bearing conductive inks. Results have shown 3D conductive structures with conductivities in the range 2x10⁶ to 1x10⁷ S/
APA, Harvard, Vancouver, ISO, and other styles
4

Latanision, Ivan M. "A comparison between the staggered position one-angle screening and the multi-angle screening method in terms of misregistration when printing process color on newsprint /." Online version of thesis, 1992. http://hdl.handle.net/1850/11251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fuller, Sawyer Buckminster 1977. "A fast flexible ink-jet printing method for patterning networks of neurons in culture." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89393.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ottesen, Vegar. "Bacterial Microarrays by Microcontact Printing : Development of a Method for Immobilizing Live Bacteria on Microarrays." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for fysikk, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26120.

Full text
Abstract:
Traditional microbiological experimental methods generally reveal population-wide statistics and are not capable of revealing variations between individual cells. In an effort to address this, a cheap, quick and easy means of producing micro-arrays with live bacteria immobilized on the array's coordinates has been developed. To achieve this, microcontact printing (µCP) was used to print circular PD ``islands'' onto a surface coated with either PEG or PVA. The bacteria, &lt;i&gt;Pseudomonas putida&lt;/i&gt; KT2440 were successfully immobilized on approximately 97% of the printed islands, depend
APA, Harvard, Vancouver, ISO, and other styles
7

McMaster, Rebecca J. "A simple method towards 3D-printing and crosslinking partially hydrolysed poly(2-ethyl-2-oxazoline)." Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/109910/1/Rebecca_McMaster_Thesis.pdf.

Full text
Abstract:
The two projects covered by this thesis represent advancements in the field of biofabrication. The first project was a proof-of-principle study focused on the development of a new polymer ink for 3D-printing. Scaffold structures were printed with a hydrophilic polymer and characterized to determine optimum printing parameters. Crosslinking strategies to create hydrogels with properties similar to human tissue were also explored. The second project was focused towards developing adipose grafts for soft tissue defects. Microfibre scaffolds were designed and 3D-printed with pores suitably sized f
APA, Harvard, Vancouver, ISO, and other styles
8

Yuan, Kaiwen. "A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator." Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54008.

Full text
Abstract:
The goal of this project is to apply 3D printing and moulding (3DPM) methods for the fabrication of a miniature magnetic actuator for optical image stabilization (OIS) applications. Polydimethylsiloxane (PDMS) and strontium ferrite (SrFe) nano powder were used as the main structural material. Young’s modulus and the magnetization of the material with SrFe-doping ratios ranging from 20% to 60% by weight were characterized. The actuator, consisting of four coils, an actuating plate, and a base supporter was assembled and tested with a Laser Doppler Velocimetry (LDV) system. A tilting angle of 0.
APA, Harvard, Vancouver, ISO, and other styles
9

Özkol, Emre [Verfasser]. "Evaluation of the direct inkjet printing method for the fabrication of three-dimensional ceramic components / Emre Özkol." Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2012. http://d-nb.info/1027765947/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Al-Khudary, Nadine. "Material thermal conductivity measurement by the 3-omega method : application to polymers characterization using inkjet printing technology." Thesis, Lille 1, 2014. http://www.theses.fr/2014LIL10135/document.

Full text
Abstract:
Dans le domaine de l'électronique souple, les substrats flexibles à base de polymères sont de plus en plus utilisés. Si dans les prochaines années, les structures de propagation mises en œuvre sur ce type de substrat véhiculent une puissance, alors la connaissance de la conductivité thermique de ces matériaux est essentielle. Dans ce travail, nous mesurons la conductivité thermique de matériaux de type polymère en utilisant la méthode 3 omégas. Des mesures ont été effectuées sur du polydiméthylsiloxane (PDMS). Un procédé technologique particulier est utilisé pour la fabrication des échantillon
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Printing method"

1

Clifton, Merritt. The Samisdat method: A do-it-yourself guide to printing. 4th ed. Factsheet Five, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Eskola, Taneli. Polymer photogravure: A new method for photographers and graphic artists. University of Art and Design Helsinki, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

McBride, James. A method of selecting final colours for reproduction on ceramic tiles by screen-printing. LCP, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rowlatt, K. Reprographic Methods. Longman Publishing Group, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Poulter, S. R. C. Developments in flexographic methods for newspaper printing. Pira, Printing and Information Technology Division, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Clem, John C. Prepress for digital printing: An introduction to prepress methods for the digital age. Trio Publications, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ruggles, Philip Kent. Printing estimating: Costing methods for digital and traditional graphic imaging. 4th ed. Delmar Publishers, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gaskell, Philip. A new introduction to bibliography. Oak Knoll Press, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gaskell, Philip. A new introduction to bibliography. St.Paul's Bibliographies, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lamprou, Dimitrios, ed. 3D & 4D Printing Methods for Pharmaceutical Manufacturing and Personalised Drug Delivery. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34119-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Printing method"

1

de Witte, Dennis. "Printing method." In Clay Printing. Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37161-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yin, Zhouping, YongAn Huang, Yongqing Duan, and Haitao Zhang. "Control Method for EHD Printing." In Electrohydrodynamic Direct-Writing for Flexible Electronic Manufacturing. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4759-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wan, Qian, Li Wang, and Guowei Ma. "Adaptable Tool-Path Planning Method for 3D Concrete Printing Based on the Mapping Method." In Proceedings of the 2020 DigitalFUTURES. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4400-6_24.

Full text
Abstract:
Abstract3D concrete printing (3DCP) has been successfully and widely applied in the fields of civil structure, infrastructure, architectural decoration etc.,due to its unique advantages of automation and flexibility, and has shown great potential for development. One of the key steps in the execution of 3DCP is the tool-path planning process. However, 3DCP typically utilize the flowable composite materials which changes with time, and it is easy to induce interface joints or filling defects due to uneven path distribution when constructing the irregular-shaped construction. To solve the proble
APA, Harvard, Vancouver, ISO, and other styles
4

Visileanu, Emilia, Gabriela Alexandra Ene, Marian Catalin Grosu, Bogdan Mihilescu, and Alina Florentina Vladu. "Screen Printing Method for Conductive Textiles." In SDGs and Textiles. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4422-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zeitlyn, Jonathan. "1. Choices of Printing Method; Design Ideas." In Low Cost Printing for Development. Practical Action Publishing, 1989. http://dx.doi.org/10.3362/9781780445342.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Marchment, Taylor, and Jay Sanjayan. "Penetration Reinforcing Method for 3D Concrete Printing." In RILEM Bookseries. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49916-7_68.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bang, You Sub, Seok Won Choi, and Jungwon Yoon. "Enhancing Seagrass Habitat Restoration: 3D Scanning and FGF for Tetrapod Prosthesis." In Computational Design and Robotic Fabrication. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-3433-0_6.

Full text
Abstract:
Abstract This study proposes a novel solution for addressing coastal erosion and ecosystem degradation worldwide. By attaching a specially designed prosthesis to the curved surface of tetrapods, common marine structures in Korea, we aim to restore vital seaweed forest ecosystems within coastal areas. Leveraging 3D scanning, printing technologies, and robotic arms, we develop a customized attachment to seamlessly integrate with tetrapods, overcoming construction area limitations. Our approach utilizes Fused Granular Fabrication, employing biodegradable plastic made from recycled seaweed waste,
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Yulong, Chengxin Li, Danfeng Jiang, Feng Liu, Xiajie Liu, and Li Li. "Preparation and Shielding Performance of Gamma Ray Shielding Composite Materials Based on 3D Printing Technology." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_52.

Full text
Abstract:
AbstractExcessive gamma-rays will be emitted when a nuclear power plant is under the refueling overhaul, leading to a certain number of hotspots. To meet the shielding requirements of these hotspots of complex components, a nylon-tungsten shielding composite material was developed by laser selective sintering 3D printing technology. The effects to shielding performance of 3D printing shielding materials were emphatically studied for two preparation processes (including mechanical mixing method and coating method) of 3D printing composite powders. Experimental results show that the nylon-tungst
APA, Harvard, Vancouver, ISO, and other styles
9

Pang, Yechi, Zhuangzhi Ye, and Zhijie Li. "Gravable Printing Plate Surface Defect Intelligent Detection Method." In Advances in Graphic Communication, Printing and Packaging. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_78.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Jiahui, Jinda Zhu, Zhiying Qin, Yuejing Zhao, Fuxiang Zhang, and Fengshan Huang. "Digital Twin Fault Diagnosis Method for Complex Equipment Transmission Device." In Innovative Technologies for Printing and Packaging. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9024-3_51.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Printing method"

1

Shi, Xinyi, and Hebin Chang. "Holographic Printing Method Based on Neural Graphic Primitives." In 2024 2nd International Conference on Artificial Intelligence and Automation Control (AIAC). IEEE, 2024. https://doi.org/10.1109/aiac63745.2024.10899516.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gao, Xiaokuo, Yanling Guo, Jian Li, and Yangwei Wang. "Path Planning Method for Large-Area Stamp-Based DLP Printing." In 2024 4th International Conference on Electronic Information Engineering and Computer Science (EIECS). IEEE, 2024. https://doi.org/10.1109/eiecs63941.2024.10800528.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Shiping, Yuankang Xin, Qinglei Meng, Yuanjing Huang, Pengfei Cheng, and Tao Hu. "A Method of 3D Printing Path Planning for Freeform Architectural Surfaces." In 2024 IEEE 19th Conference on Industrial Electronics and Applications (ICIEA). IEEE, 2024. http://dx.doi.org/10.1109/iciea61579.2024.10664765.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nagato, Hitoshi, and Tadayoshi Ohno. "Bidirectional printing method for a thermal ink transfer printer." In Printing Technologies for Images, Gray Scale, and Color, edited by Derek B. Dove, Takao Abe, and Joachim L. Heinzl. SPIE, 1991. http://dx.doi.org/10.1117/12.46338.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shi-hui, Wang, Wang Yi-ming, and Wu Shu-qin. "Research on printing registration recognition method." In 2017 3rd IEEE International Conference on Computer and Communications (ICCC). IEEE, 2017. http://dx.doi.org/10.1109/compcomm.2017.8322917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ali, Md Hazrat, Gaziz Yerbolat, and Shynggys Amangeldi. "Material Optimization Method in 3D Printing." In 2018 IEEE International Conference on Advanced Manufacturing (ICAM). IEEE, 2018. http://dx.doi.org/10.1109/amcon.2018.8614886.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hendriko, Hendriko, Prayoga Bagaskara, and Dimas Permana. "Development of An Automatic Cup Printing Machine Using a Screen Printing Method." In Proceedings of the 11th International Applied Business and Engineering Conference, ABEC 2023, September 21st, 2023, Bengkalis, Riau, Indonesia. EAI, 2024. http://dx.doi.org/10.4108/eai.21-9-2023.2342890.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Inui, Tetsuya, Junji Hirokane, Kenji Ohta, Hideyoshi Yamaoka, and Toshio Ishikawa. "Magneto-Optical Disk By Contact Printing Method." In OE/LASE '89, edited by Gordon R. Knight and Clark N. Kurtz. SPIE, 1989. http://dx.doi.org/10.1117/12.952763.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Furuta, Atsuhiro, Kazuki Honjo, and Jun Taniguchi. "Fabrication of Flexible Interposer Using Printing Method." In JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/lemp2020-8524.

Full text
Abstract:
Abstract In recent years, flexible electronic devices such as printed electronics are gathering attention. To make flexible connect between one circuit device and another circuit device, interposer is necessary. However, most of conventional interposers are not flexible, because there are made of silicon or glass substrate. To solve this problem, we have been developed fabrication process of flexible interposer. Master mold was fabricated by photolithography process. First, SU-8 resist was coated on silicon substrate with 5μm thickness. Then, photolithography process was carried out to SU-8 re
APA, Harvard, Vancouver, ISO, and other styles
10

Moscicki, Andrzej, Tomasz Falat, Anita Smolarek, Andrzej Kinart, Jan Felba, and Janusz Borecki. "Interconnection process by ink jet printing method." In 2012 IEEE 12th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2012. http://dx.doi.org/10.1109/nano.2012.6322108.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Printing method"

1

Martens, Niles. The paper stencil method of silk screen printing. Portland State University Library, 2000. http://dx.doi.org/10.15760/etd.701.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Herriot, R., T. Hastings, and H. Lewis. Internet Printing Protocol (IPP): The 'ippget' Delivery Method for Event Notifications. RFC Editor, 2005. http://dx.doi.org/10.17487/rfc3996.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Strauss, Bernhard, Britta Kleinsorge, and Pantea Lotfian. 3D printing technologies in the food system for food production and packaging. Food Standards Agency, 2023. http://dx.doi.org/10.46756/sci.fsa.suv860.

Full text
Abstract:
3D printing, also called additive manufacturing, represents a range of technologies that create 3D objects through a layer-by-layer deposition process using digital image files. 3D printing evolved over the past four decades from a prototyping tool to a manufacturing method in its own right in a number of industries and several additive manufacturing processes have matured into robust production technologies for highly customised and bespoke products when produced in small numbers. However, 3D printing technologies at their current stage of evolution are usually not considered commercially via
APA, Harvard, Vancouver, ISO, and other styles
4

Kennedy, Alan, Mark Ballentine, Andrew McQueen, Christopher Griggs, Arit Das, and Michael Bortner. Environmental applications of 3D printing polymer composites for dredging operations. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/39341.

Full text
Abstract:
This Dredging Operations Environmental Research (DOER) technical note disseminates novel methods to monitor and reduce contaminant mobility and bioavailability in water, sediments, and soils. These method advancements are enabled by additive manufacturing (i.e., three-dimensional [3D] printing) to deploy and retrieve materials that adsorb contaminants that are traditionally applied as unbound powders. Examples of sorbents added as amendments for remediation of contaminated sediments include activated carbon, biochar, biopolymers, zeolite, and sand caps. Figure 1 provides examples of sorbent an
APA, Harvard, Vancouver, ISO, and other styles
5

Wijaya, Ignasius P. A., Eric Kreiger, and Asuf Masud. An elastic-inelastic model and embedded bounce-back control for layered printing with cementitious materials. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/48091.

Full text
Abstract:
This paper presents a finite-deformation model for extrusion-based layered printing with cementitious materials. The evolution of mechanical properties as the printed material cures and stiffens results in nonphysical reduction in the magnitude of elastic strains when standard constitutive models are employed. This elastic recovery of the printing induced deformation contradicts the experimentally observed behavior of the printed cementitious materials that harden at a nearly-frozen deformed state. A thermodynamically motivated constraint on the evolution of elastic strains is imposed on the c
APA, Harvard, Vancouver, ISO, and other styles
6

Ovalle, Samuel, E. Viamontes, and Tony Thomas. Optimization of DLP 3D Printed Ceramic Parts. Florida International University, 2021. http://dx.doi.org/10.25148/mmeurs.009776.

Full text
Abstract:
Digital Light Processing (DLP) 3D printing allows for the creation of parts with advanced engineering materials and geometries difficult to produce through conventional manufacturing techniques. Photosensitive resin monomers are activated with a UV-producing LCD screen to polymerize, layer by layer, forming the desired part. With the right mixture of photosensitive resin and advanced engineering powder material, useful engineering-grade parts can be produced. The Bison 1000 is a research-grade DLP printer that permits the user to change many parameters, in order to discover an optimal method f
APA, Harvard, Vancouver, ISO, and other styles
7

Lozynskyi, Maryan. Main Features of Publishing Activities of the Ivan Franko National University of Lviv (end of the 1990s – first two decades of the 21st c.). Ivan Franko National University of Lviv, 2022. http://dx.doi.org/10.30970/vjo.2022.51.11392.

Full text
Abstract:
The article desribes the main features of the publishing activity of the Ivan Franko National University of Lviv from the end of the 1990s and in the first two decades of the 21st century. The aim of the author was to show this activity with the help of stages of formation of the Publishing Centre at the University. For this purpose, he used historical method, the methods of analysis, synthesis, content analysis etc. One of the important landmarks of the end of the 20th century in the publishing activity of the Ivan Franko National University of Lviv which has its traditions in the past was th
APA, Harvard, Vancouver, ISO, and other styles
8

Duan, Mengjie, Li Liu, Guillaume Da, and Evelyne Géhin. ASSESSING THE RELATIVE IMPORTANCE OF MUCOSAL EXPOSURE AND INHALATION EXPOSURE TO AIRBORNE PARTICLES. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541653952.

Full text
Abstract:
Particles deposited on mucosa or penetrating into lower airway are two exposure routes. Quantifying administered dose of these two routes gives us idea for future advanced individual protection. Here, we report an in-vitro method to assess the administered doses of eyes, lips, and lower airway. A CT scanning and 3D-printing based human replica is developed, and exposed in front of the 0.6-5μm monodispersed fluorescent particles. At small size particles (&lt;2.5 μm), the administered dose intensity of penetrating into lower airway inhalation (~59.41×10-2 g/g, 0.6μm) is higher than that of eyes
APA, Harvard, Vancouver, ISO, and other styles
9

Pauwels, Annelies, and Merlina Herbach. Buy It, Steal It, Print It: How Right-Wing Extremists in Europe Acquire Firearms and What To Do About It. International Centre for Counter Terrorism, 2024. https://doi.org/10.19165/2024.9820.

Full text
Abstract:
This policy brief examines the methods of firearms acquisition by right-wing extremists (RWEs) in Europe between 2019 and 2024. Based on a dataset of 118 cases, it reveals that RWEs resort to diverse legal and illegal acquisition strategies, including the use of illicit markets, legal possession, theft from military and law enforcement sources, and private manufacture, particularly 3D printing. The policy brief further discusses current EU countermeasures and their effectiveness in addressing RWE-specific acquisition methods. It identifies gaps in existing policies and enforcement, particularl
APA, Harvard, Vancouver, ISO, and other styles
10

Ballentine, Mark, Alan Kennedy, Nicholas Melby, Andrew McQueen, Christopher Griggs, and Ashley Kimble. Approach for on-site, on-demand contaminant-removal devices enabled by low-cost 3D printing. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/48353.

Full text
Abstract:
The purpose of this technical note is to disseminate methods to design and create a 3D device that could be used to determine relative toxicity potential of existing and emerging contaminants of concern in situ for sediment shoaled in federal navigation channels prior to being dredged. This device has the potential to reduce the cost of conventional sediment evaluations conducted prior to dredging operations.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Printing method' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography