Log in

Relevant bibliographies by topics / Printing organization / Journal articles

To see the other types of publications on this topic, follow the link: Printing organization.

Journal articles on the topic 'Printing organization'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Printing organization.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Mr., Azad Singh*. "FUTURE SCOPE OF WOMEN CARRIER IN THE PRINTING INDUSTRY: THE CHALLENGES OF WOMEN IN PRINTING OGANIZATIONS (A SURVEY OF TWENTY FIVE COMPANIES "SMALL, MEDIUM AND LARGE PRINTING ORGANIZATION" IN AREA "NCR DELHI AND HISAR, HR".)." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 7 (2017): 648–50. https://doi.org/10.5281/zenodo.829815.

Full text

Abstract:

Women carrier in printing organization today, printing industry is growing with an expositional rate & required skills manpower. In this survey based paper to getting recruit of women 10%small, 30%medium and 60% large scale print industry. Objective of this paper is too filled out manpower skills printing industries are seaking in B.Tech women printing students to bridge the gap between skills and required in printing organization. A survey 25 companies was carried out. the result indicated that, it support all above female and those want to advanced their carrier in printing press and get

APA, Harvard, Vancouver, ISO, and other styles

2

Kasyanov, V. V., E. V. Khrabrova, and Kn V. Melikyan. "THE ORGANIZATION OF WORK OF THE PRINTING INDUSTRY IN AGAIN FORMED SUBJECT – KRASNODAR TERRITORY." Scientific bulletin of the Southern Institute of Management, no. 3 (October 7, 2018): 102–8. http://dx.doi.org/10.31775/2305-3100-2018-3-102-108.

Full text

Abstract:

In article questions of the organization of work and further development of the printing industry in Krasnodar Territory from 1937 for 1939 are considered. The real work is continuation of the research based on studying of the organization of all kinds of activity (industrial production, agriculture, science, art) in the first years after formation of Krasnodar Territory. On the basis of historical approach and the system analysis the main stages of the organization of work of the printing industry in the territory of Krasnodar Territory have been revealed. The emphasis in article is placed on

APA, Harvard, Vancouver, ISO, and other styles

3

Karovič, Vincent, Filip Kováč, Vincent Karovič, and Peter Veselý. "Print Management System Model in a Large Organization." Applied Sciences 10, no. 12 (2020): 4193. http://dx.doi.org/10.3390/app10124193.

Full text

Abstract:

This article is focused on the analysis and solution of the issue of a printing system model in a large organization. It provides an overview of the current stat29e of the organization and its current printing system. Based on the information about strengths and weaknesses, the most suitable solution for the given organization was designed and subsequently implemented. The created design meets all the requirements required by the company, while minimizing the threats that the deployment of the new system and the resulting changes may have. The work also describes various ways of dealing direct

APA, Harvard, Vancouver, ISO, and other styles

4

Raman R, Kasi, and Manikandan N. "Effectiveness of Human Resource Practices among Printing Press Organizations in Sivakasi." International Journal of Scientific Research and Management 9, no. 05 (2021): 2211–25. http://dx.doi.org/10.18535/ijsrm/v9i05.em04.

Full text

Abstract:

The research was entitled as “Effectiveness of Human Resource Practices among Printing Press Organizations in Sivakasi”, reveals the importance of existing human resource practices followed in the organizations. The study analyses the various areas of human resource management in the organization such as recruitment and selection, training and development, performance appraisal, compensation policy and remuneration, motivation and welfare measures, and Industrial relations. The study examines the application of Human resource practices within the areas of the organization. The study confronts

APA, Harvard, Vancouver, ISO, and other styles

5

S, Karuppasamy, and Govindaraj V. "A Study on Influence of Organisational Climate on Job Satisfaction of Printing Industries in Sivakasi." Shanlax International Journal of Commerce 6, S1 (2018): 87–96. https://doi.org/10.5281/zenodo.1419406.

Full text

Abstract:

Climate of  an  organization  somewhat like the  personality just as every indiduvals has  a personality that  makes him unique and different  from  other  person  in    organization  has  an  organization climate  has  clearly  distingue  from  other    organizations.  Basically the  organizational  climate  reflects  a  person’s  perceptions  of  the organizations to which he belongs it is a set of unique characteristics’

APA, Harvard, Vancouver, ISO, and other styles

6

Ge, Huaidong, and Shuyang Deng. "La protección digital y herencia de los bloques de madera impresos “Jinling Sutra Printing”." Virtual Archaeology Review 5, no. 10 (2014): 77. http://dx.doi.org/10.4995/var.2014.4221.

Full text

Abstract:

Jinling Sutra Publishing House, a protection site for Chinese woodblock printing, is the inheritance organization for Chinese woodblock engraving and ink printing of the Chinese Buddhism classics. This paper, taking “Jinling Sutra Printing” as study object, introduced its carving and printing skills, and proposed that, by means of digital acquisition and storage technology, this intangible cultural heritage could be fully documented and presented through characters, pictures, audio, video and other information.

APA, Harvard, Vancouver, ISO, and other styles

7

Matveeva, Anastasia S. "DEVELOPMENT OF A SYSTEM FOR EVALUATING THE EFFECTIVENESS OF FINANCIAL AND ECONOMIC ACTIVITIES FOR A COMMERCIAL ORGANIZATION." EKONOMIKA I UPRAVLENIE: PROBLEMY, RESHENIYA 1/2, no. 154 (2025): 137–44. https://doi.org/10.36871/ek.up.p.r.2025.01.02.015.

Full text

Abstract:

This article examines the importance of commercial organizations for the Russian economy, on the basis of which it is concluded that it is necessary to assess the effectiveness of financial and economic activities of private sector organizations. A model for evaluating the effectiveness of financial and economic activities has been developed directly for organizations in the printing industry, but the evaluation model is practically universal and can be applied to any commercial organization with minimal amendments.

APA, Harvard, Vancouver, ISO, and other styles

8

Мясникова, L. Myasnikova, Пономарев, Vladimir Ponomarev, Самборская, and L. Samborskaya. "Additive Technology in the Innovative Development of Educational Organization and Implementation of Social Projects Related to Improving the Living Conditions of People with Visual Disability." Socio-Humanitarian Research and Technology 5, no. 2 (2016): 11–16. http://dx.doi.org/10.12737/19840.

Full text

Abstract:

Tasks of the educational organization that additive technologies solve, the main problems encountered in the implementation of 3D-printing technology in the educational process, ways of additive technology’s commercialization and benefits to educational organization provided as a result of it implementation are considered in the article. The results of the analysis of 3D-modeling and 3D-printing technology using in the implementation of social projects related to improving the living conditions of people with visual disabilities are described.

APA, Harvard, Vancouver, ISO, and other styles

9

Tusya'diyah, Halimah, and Isnaini Rodiyah. "The Role of Youth Organizations in Community Empowerment through Screen Printing Business in Krembung Village, Krembung District, Sidoarjo." JKMP (Jurnal Kebijakan dan Manajemen Publik) 7, no. 2 (2022): 15–20. http://dx.doi.org/10.21070/jkmp.v7i2.1701.

Full text

Abstract:

This study aims to describe and analyze the role of youth organization in community empowerment in Krembung Villange, Krembung District, Sidoarjo Regency. The type of research used is descriptive qualitative research. Data collection techniques are carried out through observation, interviews, and documentations. Determination on informants in this study using purposive sampling technique. Data analysis technique using Miles & Huberman theory namely data collection, data reduction, data presentation and drawing conclusions. The results of this study indicate that the empowerment of villange

APA, Harvard, Vancouver, ISO, and other styles

10

Ayusheeva, I. Z. "Problems of Legal Regulation of Contractual Relations in the Process of Creating Bio-Print Human Organs." Lex Russica, no. 6 (July 1, 2019): 92–99. http://dx.doi.org/10.17803/1729-5920.2019.151.6.092-099.

Full text

Abstract:

Additive manufacturing, 3D printing and bio-printing are technologies of the Fourth Industrial Revolution. Currently, due to the possibility of hacking the human genome, it is important to define the concept of legal regulation of relations concerning bioprinting and creation of a regulatory framework for their legal regulation, which would determine who should be held responsible for the defect takes place when printing a human organ (a creator of a digital template, a manufacturer of a 3D printer or a person who operates the 3D printer), what obligations arise with regard to the template, wh

APA, Harvard, Vancouver, ISO, and other styles

11

Răcheru, Răzvan-George, Lucia Adăscăliţa, Dorin-Vasile Piţigoi, and Emilia Bălan. "Aspects regarding the organization of printing production in the context of Industry 4.0." MATEC Web of Conferences 343 (2021): 02008. http://dx.doi.org/10.1051/matecconf/202134302008.

Full text

Abstract:

The development of information technologies has a strong impact on manufacturing systems, and the presence of the computer allows the efficient combination of various technologies needed for manufacturing into an integrated computer-controlled manufacturing system, which has also found utility in the printing field. The paper presents the results of the analysis of prepress, press (print) and postpress processes specific to printing companies in terms of integrated computer systems that make it possible to interconnect at the enterprise level. At the same time, were defined the stages, technol

APA, Harvard, Vancouver, ISO, and other styles

12

Wang, Qin Wen. "Establish the Control Template of Data Flow Based on Prinergy Workflow." Advanced Materials Research 174 (December 2010): 155–58. http://dx.doi.org/10.4028/www.scientific.net/amr.174.155.

Full text

Abstract:

Under the promoting of digital information process and computer controlling system, modern printing industry comes to a digital workflow era. Digital workflow not only changed conventional prepress and printing process but also changed the organization and transmission of conventional printing information, which brings in both opportunities and challenges to printing industries. Based on Prinergy digital workflow, the control method of prepress data was studied. According to the requirement of printing production, through theoretical analysis and experiments, with analysis of key nodes of data

APA, Harvard, Vancouver, ISO, and other styles

13

García, Ruben I., Ines Jauregui, Cristina del Amo, et al. "Implementation of an In-House 3D Manufacturing Unit in a Public Hospital’s Radiology Department." Healthcare 10, no. 9 (2022): 1791. http://dx.doi.org/10.3390/healthcare10091791.

Full text

Abstract:

Objective: Three-dimensional printing has become a leading manufacturing technique in healthcare in recent years. Doubts in published studies regarding the methodological rigor and cost-effectiveness and stricter regulations have stopped the transfer of this technology in many healthcare organizations. The aim of this study was the evaluation and implementation of a 3D printing technology service in a radiology department. Methods: This work describes a methodology to implement a 3D printing service in a radiology department of a Spanish public hospital, considering leadership, training, workf

APA, Harvard, Vancouver, ISO, and other styles

14

Khodabocus, B. Fareeda, and K. C. Constant. "Implementing OHSAS 18001:2007: - A Case Study of Hazard Analysis from the Printing Industry." International Journal of Engineering Research in Africa 1 (February 2010): 17–27. http://dx.doi.org/10.4028/www.scientific.net/jera.1.17.

Full text

Abstract:

All organizations, regardless of their size or complexity are faced with the challenge of implementing an Occupational Health and Safety (OH&S) management system that will prevent injuries and ill health to persons that are working under the control of the organization. The purpose of this paper is to show how organizations can improve their health and safety performance through the effective implementation of existing statutory requirements and regulations. Using a case study from a Printing Industry organization, the key requirements needed to implement a H&S programme and focus on t

APA, Harvard, Vancouver, ISO, and other styles

15

Zaiets, Dimitriy. "COMPARATIVE ANALYSIS OF THE ORGANIZATIONAL CULTURE OF RELIGIOUS AND COMMERCIAL INSTITUTIONS." Sophia. Human and Religious Studies Bulletin 20, no. 2 (2022): 16–18. http://dx.doi.org/10.17721/sophia.2022.20.3.

Full text

Abstract:

Based on various sources, the article analyzes the structure of organizational culture, both commercial and religious. Already known precedents are considered in detail, when the organizational culture of a commercial structure acquires signs of a religious one; the causes, consequences and mechanisms of such a metamorphosis are also considered. Another one considered main issue is point of no return when a corporation gets occult features. The article is based on the assertion that the ideas for organizing a certain structure, regardless of its strategic goals, are inherently similar and iden

APA, Harvard, Vancouver, ISO, and other styles

16

Guzowski, J., R. J. Buda, M. Costantini, M. Ćwiklińska, P. Garstecki, and H. A. Stone. "From dynamic self-organization to avalanching instabilities in soft-granular threads." Soft Matter 18, no. 9 (2022): 1801–18. http://dx.doi.org/10.1039/d1sm01350e.

Full text

Abstract:

We study a range of dynamic phenomena including capillary self-assembly and avalanching instabilities in microfluidic ‘threads’ of close-packed monodisperse droplets with applications to extrusion and printing of foams and dense microgel suspensions.

APA, Harvard, Vancouver, ISO, and other styles

17

Marpaung, Nicholas, and Onan M. Siregar. "Empowerment of Youth Organization Through Sublimation Screen Printing Training and Product Marketing Strategies in Bahorok District, Langkat Regency." ABDIMAS TALENTA: Jurnal Pengabdian Kepada Masyarakat 8, no. 1 (2023): 207–13. http://dx.doi.org/10.32734/abdimastalenta.v8i1.11885.

Full text

Abstract:

The government shows its seriousness in developing the creative economy sector to support the economy. Fashion as a part of the creative economy today can not only be worked on by people who live in urban areas but also people who live in villages, especially with the even distribution and growth of information technology in the country. People who live in the village do not always have to be farmers or workers in the agrarian sector, but also have to have job options that can be a lifestyle to continue to show their existence even though they are from the village, especially young people who

APA, Harvard, Vancouver, ISO, and other styles

18

Ye, Shi Ping, and Jian Long Ding. "Design of PDF Template Based Solution for Preformatted Paper Printing." Applied Mechanics and Materials 488-489 (January 2014): 961–65. http://dx.doi.org/10.4028/www.scientific.net/amm.488-489.961.

Full text

Abstract:

As traditional Preformatted Paper Printing methods can't adapt to the changes of document style and they have made poor performance on document security, in this paper, we have presented a PDF-based solution for Preformatted Paper Printing. The solution consists of three levels, including data organization layer, template editing and configuration layer, and PDF file generation layer. The data organization layer is mainly to solve the problem of data extraction and summary from heterogeneous databases. The template editing and configuration layer focuses on solving the printing template design

APA, Harvard, Vancouver, ISO, and other styles

19

Akhtar, Aadeel. "3D-Printing Hands that Feel." GetMobile: Mobile Computing and Communications 24, no. 4 (2021): 10–16. http://dx.doi.org/10.1145/3457356.3457360.

Full text

Abstract:

Amputation is always a devastating experience. In addition to the loss of function or sensation, the lowered body image leaves deeper emotional impacts on the victims and their loved ones. For various reasons, traumatic injuries and vascular diseases like diabetes [4] are common for particularly upper limb loss. According to the World Health Organization, there are more than 10 million people with hand amputations worldwide, 80% of whom are in developing countries. Unfortunately, only less than 3% have access to affordable prostheses [1-3]. Over the past few decades, there have been major adva

APA, Harvard, Vancouver, ISO, and other styles

20

Chaulagain, Raj Kumar. "The 3D printing technology and its application in Nepalese context." Journal of Innovations in Engineering Education 4, no. 1 (2021): 55–61. http://dx.doi.org/10.3126/jiee.v4i1.34499.

Full text

Abstract:

3DP has become popular on manufacturing platform that enables users to create customizable products through digital design. In context of 3DP's application in developing countries, Nepal is at an early stage. This paper presents a brief review of 3DP technology and case study conducted through survey on application of 3DP in Nepalese environment. The research showed presently professional and research based organization holds higher coverage among 40 different organizations spread over seven districts of the country. Though the technology is in use since 2011, it was found increasing from 2015

APA, Harvard, Vancouver, ISO, and other styles

21

Aswin, V., and U. Sindhu Vaardini. "Development of a Conceptual Model on Adoption of 3d Printing Technologies in Indian Construction Industries." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 03 (2025): 1–9. https://doi.org/10.55041/ijsrem42867.

Full text

Abstract:

This paper examines the adoption of 3D printing technologies in the Indian construction industry, focusing on organizational behavior and decision-making processes. Employing the Technology-Organization-Environment-Policy (TOEP) framework, the study highlights critical factors such as technological readiness, organizational capabilities, environmental influences, and policy regulations. In-depth interviews with Indian construction firms reveal insights into their perceptions, challenges, and motivations regarding 3D printing adoption. The findings underscore the importance of financial conside

APA, Harvard, Vancouver, ISO, and other styles

22

SHATOV, S. V., О. M. MATSENKO, Yev O. SKRYPKA, and I. O. DANYLENKO. "ECOLOGICAL AND ECONOMIC BENEFITS OF THE TRANSITION TO 3D PRINTING OF BUILDINGS IN THE ROUTE OF INDUSTRY 4.01." Ukrainian Journal of Civil Engineering and Architecture, no. 1 (June 24, 2021): 124–32. http://dx.doi.org/10.30838/j.bpsacea.2312.230221.124.727.

Full text

Abstract:

Problem statement. The high level of costs, energy and resource intensity in the field of construction leads to research aimed at improving the economic, social and environmental performance of construction processes from the standpoint of current trends in innovation in line with Industry 4.0. Especially relevant are studies adapted to the conditions of the national economy. The purpose of the article is to research of directions of development of technologies in the construction sphere, in particular technologies of 3D-printing, definition of ecological and economic advantages of trans

APA, Harvard, Vancouver, ISO, and other styles

23

Yang, Wenguang, Lujing Sun, Shuxiang Cai, et al. "Dynamically directing cell organization via micro-hump structure patterned cell-adhered interfaces." Lab on a Chip 20, no. 14 (2020): 2447–52. http://dx.doi.org/10.1039/d0lc00477d.

Full text

Abstract:

We present a simple method to fabricate micro-hump patterned interfaces based on electrohydrodynamic jet (E-jet) printing to control and direct cell organization. Microstructures were rapidly fabricated and cell adhesion was significantly enhanced by the micro-hump structures.

APA, Harvard, Vancouver, ISO, and other styles

24

Kim, Seok, Hongkyu Kang, Soonil Hong, et al. "A Versatile Self-Organization Printing Method for Simplified Tandem Organic Photovoltaics." Advanced Functional Materials 26, no. 21 (2016): 3563–69. http://dx.doi.org/10.1002/adfm.201505161.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Kartvelishvili, V. M., D. S. Krynetskiy, and A. S. Yusupova. "About Optimization Methods Printing Activity." Vestnik of the Plekhanov Russian University of Economics, no. 6 (December 18, 2018): 172–84. http://dx.doi.org/10.21686/2413-2829-2018-6-172-184.

Full text

Abstract:

The article considers publication activity of academic and pedagogical workers of the university as an important criterion of the organization and its personnel work. Publication activity is an indirect presentation of results of employees' research work. The review of leading bases of academic citing of Russian authors, including international ones (Web of Scince, Scopus), as international publication activity shows the degree of science development in the Russian Federation in comparison with science in other countries. The article investigates the interrelation of subjective in-university a

APA, Harvard, Vancouver, ISO, and other styles

26

Al-Halhouli, Ala’aldeen, Ahmed Albagdady, Ja’far Alawadi, and Mahmoud Abu Abeeleh. "Monitoring Symptoms of Infectious Diseases: Perspectives for Printed Wearable Sensors." Micromachines 12, no. 6 (2021): 620. http://dx.doi.org/10.3390/mi12060620.

Full text

Abstract:

Infectious diseases possess a serious threat to the world’s population, economies, and healthcare systems. In this review, we cover the infectious diseases that are most likely to cause a pandemic according to the WHO (World Health Organization). The list includes COVID-19, Crimean-Congo Hemorrhagic Fever (CCHF), Ebola Virus Disease (EBOV), Marburg Virus Disease (MARV), Lassa Hemorrhagic Fever (LHF), Middle East Respiratory Syndrome (MERS), Severe Acute Respiratory Syndrome (SARS), Nipah Virus diseases (NiV), and Rift Valley fever (RVF). This review also investigates research trends in infecti

APA, Harvard, Vancouver, ISO, and other styles

27

Burke, Peter. "Orders of Knowledge in Early Modern Europe." Asiatische Studien - Études Asiatiques 71, no. 3 (2017): 993–1002. http://dx.doi.org/10.1515/asia-2017-0019.

Full text

Abstract:

Abstract This paper offers a brief sketch, first, of the organization of knowledge that was inherited from the Middle Ages and remained dominant in Europe around the year 1450, and in the second place, of the ways in which this organization was modified in response to the challenges of the early modern world, notably the Renaissance, the Reformation, the invention of printing and the discovery of America.

APA, Harvard, Vancouver, ISO, and other styles

28

Muoth, C., M. Rottmar, A. Schipanski, et al. "A micropatterning approach to study the influence of actin cytoskeletal organization on polystyrene nanoparticle uptake by BeWo cells." RSC Advances 6, no. 76 (2016): 72827–35. http://dx.doi.org/10.1039/c6ra13782b.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Cioca, Lucian-Ionel, and Maria-Viorela Codoi. "The Impact Of Carbon Footprinting In Romania." Balkan Region Conference on Engineering and Business Education 1, no. 1 (2014): 417–20. http://dx.doi.org/10.2478/cplbu-2014-0068.

Full text

Abstract:

AbstractCarbon foot printing became an important term for surprisingly many people in the last years. It is very important that people learn what effects may have carbon foot printing on their lifes and how it’s produced. The term “carbon foot printing” is just a name which is the result of global warming potential. Carbon foot printing is considered a very popular buzzword in Romania in the last year. The carbon footprint measures total greenhouse gas emissions caused directly and indirectly, by a person, organization, event or product. In Romania the carbon emissions are the consequences of

APA, Harvard, Vancouver, ISO, and other styles

30

Simões, Ricardo. "Current and Future Opportunities for 3D Printing in Modern Board Games." International Journal of Games and Social Impact 1, no. 2 (2023): 140–54. http://dx.doi.org/10.24140/ijgsi.v1.n2.07.

Full text

Abstract:

Additive manufacturing (3D printing) is a set of disruptive technologies where parts are no longer produced by removing material until the desired form is achieved, but rather build the intended product layer by layer. With significant benefits in the efficient use of resources, optimizing performance, and allowing individual customization of each print, 3D printing techniques have been more widely adopted worldwide, and modern board games are no exception. However, until now its use is mostly hobbyists creating and sharing 3D models for improving player experience in two aspects: customizatio

APA, Harvard, Vancouver, ISO, and other styles

31

Sumardi and Septiana Hadiamin. "ANALISIS KELAYAKAN PENAMBAHAN MESIN CETAK DI PERCETAKAN GRAND DEPOK PRINTING." Jurnal Publikasi Ekonomi dan Akuntansi 2, no. 2 (2022): 130–36. http://dx.doi.org/10.51903/jupea.v2i2.291.

Full text

Abstract:

This research is done to find out whether it is feasible or not if this research is done to find out whether it is feasible or not if the Grand Depok Printing printing business adds investment in the procurement of new printing presses. The data used is to use an estimate of initial capital investment analysis. The analysis tool used is the Payback period (PP) method. Net Present Value (NPV), Internal Rate Of Return (IRR), and Profitability Index (PI) and investigate aspects in business feasibility studies namely Legal Aspects, Market and Marketing Aspects, Technical / Operations Aspects, Fina

APA, Harvard, Vancouver, ISO, and other styles

32

Chen, Wei, Haodong Tang, Nian Li, et al. "Colloidal PbS quantum dot stacking kinetics during deposition via printing." Nanoscale Horizons 5, no. 5 (2020): 880–85. http://dx.doi.org/10.1039/d0nh00008f.

Full text

Abstract:

The particle self-organization behavior of small-sized quantum dots is studied in situ with grazing-incidence small-angle X-ray scattering and during the drying process two phase transitions are found.

APA, Harvard, Vancouver, ISO, and other styles

33

Eto, Hiromune, Henri G. Franquelim, Michael Heymann, and Petra Schwille. "Membrane-coated 3D architectures for bottom-up synthetic biology." Soft Matter 17, no. 22 (2021): 5456–66. http://dx.doi.org/10.1039/d1sm00112d.

Full text

Abstract:

This paper outlines a robust method to template biological membranes in 3D geometries using micron-scale 3D printing. Dynamic protein systems were reconstituted in vitro and their self-organization was observed in response to the 3D geometry.

APA, Harvard, Vancouver, ISO, and other styles

34

Kozlov, Sergey Viktorovich, Sergey Alexandrovich Kopylov, Boris Vladimirovich Kondrat’ev, and Dmitry Olegovich Obydenkov. "Implementing Watermarking Based on a Virtual XPS Printer for Windows Operating Systems." Proceedings of the Institute for System Programming of the RAS 32, no. 5 (2020): 95–110. http://dx.doi.org/10.15514/ispras-2020-32(5)-7.

Full text

Abstract:

The article presents an approach to electronic documents printed marking by implementing a virtual XPS printer in Windows operating systems. The developed approach allows marking electronic documents during printing, regardless of the document presentation format and requirements for the printing process. During the marking approach development and implementation, a comparative analysis of technical solutions in the field of marking electronic documents was carried out, advantages and disadvantages were determined. Requirements and limitations imposed on the marking approach are defined. The v

APA, Harvard, Vancouver, ISO, and other styles

35

Zaim, Selim, Ali Turkyılmaz, Mehmet F. Acar, Umar Al‐Turki, and Omer F. Demirel. "Maintenance strategy selection using AHP and ANP algorithms: a case study." Journal of Quality in Maintenance Engineering 18, no. 1 (2012): 16–29. http://dx.doi.org/10.1108/13552511211226166.

Full text

Abstract:

PurposeThe purpose of this paper is to demonstrate the use of two general purpose decision‐making techniques in selecting the most appropriate maintenance strategy for organizations with critical production requirements.Design/methodology/approachThe Analytical Hierarchical Process (AHP) and the Analytical Network Process (ANP) are used for the selection of the most appropriate maintenance strategy in a local newspaper printing facility in Turkey.FindingsThe two methods were shown to be effective in choosing a strategy for maintaining the printing machines. The two methods resulted in almost t

APA, Harvard, Vancouver, ISO, and other styles

36

Rudnev, Dm V. "Organization of a printing press at the Artillery and Engineering cadet corps." Петербургский исторический журнал, no. 2 (2014): 38–52. http://dx.doi.org/10.51255/2311-603x-2014-00024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Kingsley Graham, Nicholas, Yarhands Dissou Arthur, and Duke Peprah Mensah. "Managerial role in ensuring successful total quality management programme in Ghanaian printing firms." TQM Journal 26, no. 5 (2014): 398–410. http://dx.doi.org/10.1108/tqm-01-2012-0009.

Full text

Abstract:

Purpose – Most of the total quality management (TQM) programmes implemented in the printing industry fail to produce the intended benefit, because of the view that quality achievement is workers responsibility. The purpose of this paper is to examine the role management plays in the implementation of TQM programme in the Ghanaian printing firms. Design/methodology/approach – The study employed mixed method in gathering relevant data. A cross-sectional survey questionnaire was given to 145 managers of registered members of Ghana Printers and Paper Converters Association, Southern Sector to asse

APA, Harvard, Vancouver, ISO, and other styles

38

Li, Guozhu. "Improvement and Experimental Explore on Coordinated Control of Kinematic Mechanism of FDM 3D Printer." Advances in Multimedia 2022 (September 16, 2022): 1–9. http://dx.doi.org/10.1155/2022/4422616.

Full text

Abstract:

As the main component of the 3D printing industry, the fused deposition process covers all aspects of the industry with its advantages of low R&D investment, high practicability, and open source programs. However, due to process problems, problems have arisen in terms of printing efficiency and molding quality. To this end, we designed a large-scale multinozzle FDM printing device using the high-current fused deposition (FDM) printing principle. The defects of small size, slow printing speed, and low precision are deeply studied, and the machine structure is optimized according to the stru

APA, Harvard, Vancouver, ISO, and other styles

39

Rogowska, Patrycja. "CONSTRAINTS IN PRINTING INDUSTRY." Scientific Papers of Silesian University of Technology Organization and Management Series 2024, no. 208 (2024): 555–64. https://doi.org/10.29119/1641-3466.2024.208.33.

Full text

Abstract:

Purpose: The main objective of this paper is to identify typical constraints characteristic of the printing industry and to systematize them through quantitative research. Design/methodology/approach: A literature review method and a quantitative survey conducted on a sample of 237 companies in the printing industry were used to solve the research problems. This study is both theoretical and empirical. Findings: The answers obtained from the respondents, allowed the development of a systematic of constraints, and also helped to expand the knowledge of printing companies. A total of 26 constrai

APA, Harvard, Vancouver, ISO, and other styles

40

Mr., Rajeev*1 &. Mr. Dhirender2. "IMPACT OF DIFFERENT ECO-FRIENDLY TECHNIQUES ON ENVIRONMENTAL PERFORMANCE OF THE OFFSET PRINTING INDUSTRY." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 7 (2017): 800–804. https://doi.org/10.5281/zenodo.834528.

Full text

Abstract:

Environment and printing seems totally different fields but no any technological field can remain in isolation from other field at present time. Printers need to take extra care about environment because it is not only regulatory requirement but also socialresponsibility and hence requirement of industry. To comply with environment regulation, printers need to understand what impact industry has on environment. There are various materials, like ink, paper, plate, solvents and photographic film, are being used in offset printing machine. By the use of 3R technique that is reduce, reuse and recy

APA, Harvard, Vancouver, ISO, and other styles

41

Pshenichnikova, K. A. "Rapidly Constructed 3D Buildings: Sustainable Solutions in Multifactor Risk Conditions." Housing Construction, no. 5 (June 14, 2025): 3–11. https://doi.org/10.31659/0044-4472-2025-5-3-11.

Full text

Abstract:

The article deals with the peculiarities of forming fast architectural objects based on 3D printing under conditions of multifactor risks. The purpose of the article is to identify approaches to the organization of spatial environment: technical and social. The first type includes technical developments in design, erection and operation. Social concepts take into account the necessary human needs. The study provides insight into the methods and materials used in 3D printing, as well as the prerequisites for the development of additive manufacturing. Scientific works on the investigated problem

APA, Harvard, Vancouver, ISO, and other styles

42

Espiritu, Jose Marie P. "Exploring Business Dynamics in the Printing Industry of Nueva Ecija." International Journal of Advanced Engineering, Management and Science 10, no. 6 (2024): 55–59. http://dx.doi.org/10.22161/ijaems.106.8.

Full text

Abstract:

The study measured the business dynamics of the printing industry in Nueva Ecija, Philippines as to their organization and management, marketing, technical, financial, and socio-economic aspects. The study employed a descriptive type of research, and a survey method of research was applied. The study was carried out among 50 printing businesses chosen in different parts of Nueva Ecija. The printing industry in Nueva Ecija is largely made up of small, owner-managed enterprises with a focus on maintaining low costs and labor-intensive operations. The limited workforce size and moderate wage leve

APA, Harvard, Vancouver, ISO, and other styles

43

Purnama, Chamdan, Mirhamida Rahmah, and Dinda Fatmah. "Self-efficacy, Innovative Work Behavior and Job Performance in Digital Printing." BASKARA : Journal of Business and Entrepreneurship 5, no. 1 (2022): 1. http://dx.doi.org/10.54268/baskara.5.1.1-10.

Full text

Abstract:

Human resources in organizations play a very important role because the company's success in achieving its goals cannot be separated from the role of its employees. Organizational progress will also be achieved if human resources have good performance. The reason for this study was to clarify the effect of direct and indirect self efficacy against job performance through innovative work behavior.This review was planned as explanatory research that intends to give a clarification of the causal connection between variables through theory testing and expects to acquire proper testing in making ca

APA, Harvard, Vancouver, ISO, and other styles

44

Purnama, Chamdan, Mirhamida Rahmah, and Dinda Fatmah. "Self-efficacy, Innovative Work Behavior and Job Performance in Digital Printing." BASKARA : Journal of Business and Entrepreneurship 5, no. 1 (2022): 1. http://dx.doi.org/10.54268/baskara.v5i1.12644.

Full text

Abstract:

Human resources in organizations play a very important role because the company's success in achieving its goals cannot be separated from the role of its employees. Organizational progress will also be achieved if human resources have good performance. The reason for this study was to clarify the effect of direct and indirect self efficacy against job performance through innovative work behavior.This review was planned as explanatory research that intends to give a clarification of the causal connection between variables through theory testing and expects to acquire proper testing in making ca

APA, Harvard, Vancouver, ISO, and other styles

45

Camacho, Paula, Matthew Fainor, Kelly B. Seims, John W. Tolbert, and Lesley W. Chow. "Fabricating spatially functionalized 3D-printed scaffolds for osteochondral tissue engineering." Journal of Biological Methods 8, no. 1 (2021): e146. http://dx.doi.org/10.14440/jbm.2021.353.

Full text

Abstract:

Three-dimensional (3D) printing of biodegradable polymers has rapidly become a popular approach to create scaffolds for tissue engineering. This technique enables fabrication of complex architectures and layer-by-layer spatial control of multiple components with high resolution. The resulting scaffolds can also present distinct chemical groups or bioactive cues on the surface to guide cell behavior. However, surface functionalization often includes one or more post-fabrication processing steps, which typically produce biomaterials with homogeneously distributed chemistries that fail to mimic t

APA, Harvard, Vancouver, ISO, and other styles

46

Ma, Xue Liang. "Application Prospect of Additive Manufacturing Technology in 3D Printing." Advanced Materials Research 803 (September 2013): 409–12. http://dx.doi.org/10.4028/www.scientific.net/amr.803.409.

Full text

Abstract:

The additive manufacturing has become an important development direction of advanced manufacturing technology, the technology will be developed in three directions: the first is the daily consumer goods manufacturing direction; the second is a functional parts manufacturing; the third is the integration of organization and structure of manufacture. The key technologies are needed to solve in the future included: precision control technology, efficient manufacturing technology, composite parts manufacturing technology.

APA, Harvard, Vancouver, ISO, and other styles

47

Fauzobihi, Fauzobihi, Indina Tarziyah, and Partimah Partimah. "The Influence of Internal Communication in the Organization on PT Wahyu Abadi (CIKARANG) Employee Performance." JISIP (Jurnal Ilmu Sosial dan Pendidikan) 8, no. 2 (2024): 947. http://dx.doi.org/10.58258/jisip.v8i2.6580.

Full text

Abstract:

PT Wahyu Abadi is a company operating in the manufacturing industry specializing in printing and packaging. The company seeks to push the printing and packaging industry to new levels of innovation. This company provides business solutions in the fields of printing, packaging, digital and supply chain. PT Wahyu Abadi was chosen as the research location, which is located on Jl. Angsana Raya Blok L1 No 17, Delta Silicon 1 Industrial Area, Lippo Cikarang Bekasi, Indonesia. The analysis carried out using SPSS 21.0 found that the value of the influence of Internal Communication (X) on Employee Perf

APA, Harvard, Vancouver, ISO, and other styles

48

Pirozhkova, Tatyana. "Typographers of the Crimean ASSR in the 1920s and 1930s: Personnel Characteristics." Journal of Economic History and History of Economics 23, no. 1 (2022): 84–107. http://dx.doi.org/10.17150/2308-2488.2022.23(1).84-107.

Full text

Abstract:

The article uncovers some questions of the labor history of printing production workers in the Crimean ASSR in 1920–1930s. The aim of the article is investigation of the staff structure of the Crimean ASSR printing industry workers in comparison with the national structure. The objectives of the study are to examine the dynamics of the number of workers in the printing industry of the Crimea, to analyze the proportion of women, national personnel (Crimean Tatars), adolescents, skilled workers in the overall structure of the printing industry workers of the Crimean ASSR, and to compare the obta

APA, Harvard, Vancouver, ISO, and other styles

49

Yaagoubi, H., H. Abouchadi, and M. Taha Janan. "The 3D Printing solutions during the COVID-19 pandemic in 2020/2021." SHS Web of Conferences 119 (2021): 07001. http://dx.doi.org/10.1051/shsconf/202111907001.

Full text

Abstract:

The 2019-2021 coronavirus pandemic (COVID-19), which began in the city of Wuhan in China, towards the end of 2019. As of March 12, 2020, the World Health Organization ordered the disease of coronavirus 2019 (COVID-19) as a pandemic, at the time of its composition, has spread to more than 180 countries on the planet. The number of COVID-19 patients is on the rise worldwide; given the high number of patients and the disruption of the production network; this has created a shortage of clinical parts and personal protective equipment; the 3D printing has endorsed its role in this area. 3D printing

APA, Harvard, Vancouver, ISO, and other styles

50

Arora, Ranjan, Pawan K. Arora, Harish Kumar, and Meena Pant. "Additive Manufacturing Enabled Supply Chain in Combating COVID-19." Journal of Industrial Integration and Management 05, no. 04 (2020): 495–505. http://dx.doi.org/10.1142/s2424862220500244.

Full text

Abstract:

Additive manufacturing (AM) is a method in which three-dimensional structures are successively laid down to create a solid object. The inherent advantages of AM technology are successfully drafted and exploited by the different organization across the globe. During the time of pandemic i.e. COVID-19, 3D printing has come to rescue and has been used for manufacturing critical medical supplies. 3D printing has been used in manufacturing some of the critical items like ventilators valves, face shields, swabs, oxygen valves, hand sanitizer holders, 3-DP lung models, etc. The main reason for its su

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!