Journal articles: 'Printing-press'

1

Gunaratne, Shelton A. "Paper, Printing and the Printing Press." Gazette (Leiden, Netherlands) 63, no. 6 (December 2001): 459–79. http://dx.doi.org/10.1177/0016549201063006001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

NAWATA, Takuo. "Offst Printing Press." Journal of the Surface Finishing Society of Japan 42, no. 6 (1991): 585–88. http://dx.doi.org/10.4139/sfj.42.585.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

IZUMI, KAZUTO. "Digital Printing Press." Sen'i Gakkaishi 51, no. 9 (1995): P371—P375. http://dx.doi.org/10.2115/fiber.51.9_p371.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

ISONO, Hitoshi. "Offset Printing Press." Journal of the Society of Mechanical Engineers 107, no. 1031 (2004): 803–6. http://dx.doi.org/10.1299/jsmemag.107.1031_803.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wei, Yan Bin, Hai Yan Zhang, and Chun Guo Liu. "Shaftless Driving Development Research on Sheet-Fed Offset Press." Advanced Materials Research 834-836 (October 2013): 1682–86. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.1682.

Full text

Abstract:

shaftless driving is a kind of advanced and new drive way which can solve the high precision of printing synchronism, mainly used in gravure printing, soft printing and wheel transformation printing equipment but less used in sheet-fed offset press at present. Based on sheet-fed offset press as the research object, the author analyzed the transmission characteristics of sheet-fed offset press, designs a scheme of shaftless driving used in sheet-fed offset press and set up the hardware and software platform, verified the scheme by experiments.

APA, Harvard, Vancouver, ISO, and other styles

6

Zhao, Ji Bin, and Xiu Li Li. "Research on Shaft-Less Technology of Inking System." Advanced Materials Research 291-294 (July 2011): 3368–71. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.3368.

Full text

Abstract:

The principle of inking system in sheet-feed printing press is introduced. Some tests on ink thickness are performed and the experiment results shows that in the traditional press, some inherent defects cause serious quality problems. The application of shaft-less drive technology to printing press is introduced and the drive principle of inking rollers of printing press and is explained. Synchronization control method of rollers is put forward, and the shaft-less technology is applied to the inking roller. Control system of shaft-less roller press is constructed for four color printing. Mechanical zero and electrical zero can be reset and corrected. Slight asynchrony is allowed between inking rollers and cylinders for normal printing, and the speed difference between them can eliminate a kind of printing troublesome of ghosting when needed. Analysis shows that with this technology, the functions of press are extended. Furthermore, the results of calculation indicated that when printing the special products, the make-ready time for inking is shorten about 50% and the power consumption is decreased about 19.8 to 21.5%, so the efficiency of machine can be increased by a big margin and the power cost can be cut down obviously.

APA, Harvard, Vancouver, ISO, and other styles

7

SUZUKI, Kenji. "Gears in Printing Press." Journal of the Japan Society for Precision Engineering 58, no. 8 (1992): 1296–98. http://dx.doi.org/10.2493/jjspe.58.1296.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Yang, Ming, Jin Yao Li, Jia Cong Chen, and Shi Jia Kong. "A Brief Analysis of Vibration on the Printing Area in Ordinary Offset Press." Advanced Materials Research 591-593 (November 2012): 2091–94. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.2091.

Full text

Abstract:

At the development of modern printing, vibration may course some products quality problems when increases the speed. Practical experience shows that the mechanical vibration of the offset press is an important reason to affect the print quality. Therefore, improving the vibration performance of the printing press and designing the structure of anti-vibration and noise reduction to improve the quality and speed of printing presses is an important issue in the press product development. This paper proposes some reasons and solution ideas of vibration on printing parts in ordinary offset printing machines.

APA, Harvard, Vancouver, ISO, and other styles

9

SHIMIZU, Kyugo. "Special Issue/Printing and Copy. Pat Press Printing." Journal of the Surface Finishing Society of Japan 42, no. 7 (1991): 697–702. http://dx.doi.org/10.4139/sfj.42.697.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Mohd Sharif, Mohd Shahrul Azha, Arba'iyah Mohd Noor, and Mohd Firdaus Abdullah. "The History of Qalam Press Printing Companies, 1948-1969." Jurnal Komunikasi: Malaysian Journal of Communication 38, no. 1 (March 31, 2022): 179–200. http://dx.doi.org/10.17576/jkmjc-2022-3801-10.

Full text

Abstract:

After the second world war, many Malay printing companies were formed to enliven the printing and newspaper industry in Malaya. Qalam Press was one of the Malay private printing companies established by Syed Abdullah bin Hamid Al-Edrus (Edrus), who played an important role in the publication of magazines, novels and religious works during the period stated. Qalam Press also has various strategies and ways to make the publications relevant and competitive compared to other printing companies. However, the publishing company also faced conflicts and problems of its own that caused various actions to be taken to resolve the problems mentioned. Thus, this research aims to evaluate Qalam Press's success in positioning themself as one of the leading Malay private printing companies in Malaya from 1948 to 1969. This research is qualitative historical research that also applies oral history methods. Research resources were obtained from the National Archives of Malaysia, IPTA Libraries throughout Malaysia, the National Library of Malaysia, government departments and others. The study found that Qalam Press succeeded in becoming one of the long-lasting Malay private printing companies in the printing industry due to various marketing and management strategies carried out by the company which is seen to help the development of Qalam Press. Keywords: Qalam Press, Malay Private Printing Company, Magazine, Novel, Religious Work.

APA, Harvard, Vancouver, ISO, and other styles

11

Latif, Antinah. "NOISE LEVEL INVESTIGATION (L-MIN AND L-MAX) IN PRINTING LABORATORY AT POLITEKNIK NEGERI MEDIA KREATIF, JAKARTA." Jurnal Ilmiah Publipreneur 7, no. 1 (September 4, 2020): 7–13. http://dx.doi.org/10.46961/jip.v7i1.67.

Full text

Abstract:

Printing is one of the activities that have job risks for its workers. One of the risks of works in printing is the presence of physical environment factors. This study aims to determine the noise level with different types of machines in the printing lab at Politeknik Negeri Media Kreatif, Jakarta. The study design used in this research is descriptively obtained through direct measurements using Sound Level Meters in digital printing work areas, Computer to Print machines (pre-press), 4 color sakura brand printing machines (press), and production machines in the post-press machine that is a folding, cutting machine, wire sewing machine, binding machine, and press machine. Obtained an average of different noise levels each section under 85 dBA tolerated by law.

APA, Harvard, Vancouver, ISO, and other styles

12

Chen, Yi Jun, Er Gang Kou, and Qing Hai Zhao. "Research on Web Press Printing without Ink Detector." Advanced Materials Research 411 (November 2011): 630–33. http://dx.doi.org/10.4028/www.scientific.net/amr.411.630.

Full text

Abstract:

Printing press manufacturers need to detect assembled machine whether the printing is qualified. This wastes a lot of paper, ink and human, and is not conducive to business efficiency. In this paper, through analysis of web press, the instrument is developed that takes the paper to detect the offset with non-printing ink on the printing press, through high-precision optical sensors, it can get the offset of conveyor belt material in the course of the amount of deviation. The amount of assembly precision machine is detected based on deviation; Then design a circuit tester hardware and software; Finally, the detector was tested, the results show that the detector is designed to achieve the design requirements.

APA, Harvard, Vancouver, ISO, and other styles

13

Ulu, Cafer, and Kemal Ozden. "Minority press and control in the Ottoman State and the Republic of Turkey: the example of the Armenian press." Journal of Global Social Sciences 4, no. 13 (February 20, 2023): 25–45. http://dx.doi.org/10.58934/jgss.v4i13.132.

Full text

Abstract:

In line with the stages that humanity has gone through, the technique of putting information on paper with symbols has evolved gradually. Modern printing techniques evolved from early printing techniques and materials. Subjects of the Ottoman Empire closely followed advances in Europe, and the printing press was introduced there. Armenians significantly advanced printing and publishing in the Ottoman and Turkish Republic eras. They established printing facilities and published books, periodicals, newspapers, and other things. While carrying out these activities, they sometimes received awards, but they had problems in some periods. Due to some of the contents in the materials they published, they were punished such as closing the newspapers and magazines, having the books confiscated, or not being brought into the country. The Turkish government has also closely followed materials published abroad. While examining the minority press in the Ottoman and Turkish Republics, this article focuses on the Armenian press.

APA, Harvard, Vancouver, ISO, and other styles

14

Lenkart, Joseph. "Russian Revolutions in Print: The Fate of the Ethnic Press." Slavic Review 76, no. 3 (2017): 655–63. http://dx.doi.org/10.1017/slr.2017.173.

Full text

Abstract:

On October 28, 1917, Izvestiia published V.I. Lenin's directive on printing, which articulated his vision for reshaping the printing press as the “inseparable” literary organ of the party. Although Lenin's views on printing and publishing were known to his close associates, this directive outlined a clear process upon which the party was able to base its revolutionary goal of total consolidation, thus reshaping local publishing cultures and determining the fate of the ethnic press during and after the Russian Revolution. The end goal of this process was to create an extensive publishing apparatus, which was subservient to party orthodoxy and homogeneity. This article discusses the consolidation of the ethnic press by highlighting the case of the Tatar printing press during the early Soviet period.

APA, Harvard, Vancouver, ISO, and other styles

15

Cagé, Julia, and Valeria Rueda. "The Long-Term Effects of the Printing Press in sub-Saharan Africa." American Economic Journal: Applied Economics 8, no. 3 (July 1, 2016): 69–99. http://dx.doi.org/10.1257/app.20140379.

Full text

Abstract:

This article investigates the long-term consequences of the printing press in the nineteenth century sub-Saharan Africa on social capital nowadays. Protestant missionaries were the first to import the printing press and to allow the indigenous population to use it. We build a new geocoded dataset locating Protestant missions in 1903. This dataset includes, for each mission station, the geographic location and its characteristics, as well as the printing-, educational-, and health-related investments undertaken by the mission. We show that, within regions close to missions, proximity to a printing press is associated with higher newspaper readership, trust, education, and political participation. (JEL L82, N37, N77, N97, O17, O43, Z13)

APA, Harvard, Vancouver, ISO, and other styles

16

Eze, Felicia, Murat Akyüz, and Opusunju Michael Isaac. "Effect of Strategic Intent on Performance of Small and Medium Scale Printing Press Firms in Abuja, Nigeria." Entrepreneurship Review 1, no. 2 (September 18, 2020): 26–37. http://dx.doi.org/10.38157/entrepreneurship-review.v1i2.166.

Full text

Abstract:

Purpose: This study investigates the effect of strategic intent on the performance of small and medium scale printing firms in Federal Capital Territory (FCT), Abuja, Nigeria. Methods: The population of the study included all the small and medium scale printing press in Abuja which is 226 and the sample size of 68. A multiple regression model was formulated to estimate the effect of strategic intent (vision, mission, and objectives) on performance (growth) of small and medium scale printing press firms in Abuja. The study also adopted a control variable such as finance to have a better coefficient of determination. Findings: The study found that strategic intent had a positive and significant effect on the growth of small and medium scale printing press firms in Nigeria. The study also found that finance (collateral, access to finance, and insufficient finance) had a negative and insignificant effect on the growth of small and medium scale printing press firms in Nigeria. Implication: Small and medium printing press firms in Abuja, FCT should communicate their vision, mission statement, and objectives to their employees. The microfinance banks in collaboration with the central bank of Nigeria should minimize collateral conditions in obtaining microcredit from microfinance banks.

APA, Harvard, Vancouver, ISO, and other styles

17

Wu, Shu Qin, Yi Ming Wang, Ji Fei Cai, and Shao Hua Zhang. "Research on the Methods of the Testing on the Value of the Cylinder's Axial Bounce of the Press." Advanced Materials Research 174 (December 2010): 273–76. http://dx.doi.org/10.4028/www.scientific.net/amr.174.273.

Full text

Abstract:

Printing cylinder driven by helical gear is the basic requirements of the modern printing press. Helical gear transmission necessarily produces component force in axial. It brings about a small displacement in axial to the cylinder, that is, axial bounce. The axial placement is too small or too large during the printing process, which both will have harmful effects on printed matter. At the same time, the axial playing of the cylinder is one of the important performance standards to determine printing press. The modern high-speed printing press has a higher requirement on mechanic properties and axial bounce. We tested on the cylinders of press and analyzed on the placement of the cylinders in order to effectively master and control the displacement in axial in the case of the printing press running with high-speed. We chose a four-color offset press as the test objects and reasonably selected measurement points on the cylinder shaft end face. We collected vibration signals of the blanket cylinders, impress cylinders and transfer cylinders. Then obtain the placement in axial of the cylinders with quadrature method. Analysis shows that the higher the printing speed, the larger the placement of the same type cylinder in axial is, which shows that the placement of the cylinders in axial has something to do with the printing speed. At the same speed, the blanket cylinder have a larger placement in axial than impress cylinder and transfer cylinder. Which shows that the placement of the cylinders in axial has connection to the cylinder assembly structure. Test data accord well with the actual structure and assembling condition, which can be considered as the theoretical basis to control the placement of cylinder in axial.

APA, Harvard, Vancouver, ISO, and other styles

18

Smith, Roger. "The 21st-Century Printing Press." Research-Technology Management 60, no. 1 (January 2, 2017): 57–59. http://dx.doi.org/10.1080/08956308.2017.1255061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Wang, Yi Ming, Bang She Chen, Yan Li, and Shao Hua Zhang. "Research on Dynamic Design Method Based on Measuring Information for Printing Press." Advanced Materials Research 174 (December 2010): 290–94. http://dx.doi.org/10.4028/www.scientific.net/amr.174.290.

Full text

Abstract:

Printing machinery’s reliability is one of the most important index parameter and good dynamic characteristics are essential for high speed printing press. The dynamic characteristic is predictable for printing machine with dynamic design. With the complexity of printing technique and printing machine, information, such as load on components is lack, leading to the difficulty of dynamic model solving and further more the dynamic parameters needs to be verified. Firstly, according to the dynamic design method, a dynamic design process based on measuring information for printing machine was put forward. Secondly, on the basis of principle and structure analysis to typical printing machine, dynamic characteristics measurement item and method was determined. With a wallboard of a two-color offset press acting as an example, the utilizing method was illustrated through dynamic modeling, theoretical model analysis, experiment model analysis based on vibration measurement and comparing the theoretical and experimental results. Finally, a Dynamic Design Assistant Platform based Vibration Measurement for Printing Machine was developed and had been used in 10 kinds of printing machine measurement and analysis. The conclusion shows that the tolerance of the theoretical model analysis results and experiment results is allowed. A new approach for new printing machine design and optimal design for existed printing machine is given.

APA, Harvard, Vancouver, ISO, and other styles

20

Liau, Pei Ling, Jie Lian Luo, and Guan Ning Zu. "A Study of Special Printing Used in the Theories of Graphic Design." Applied Mechanics and Materials 262 (December 2012): 315–19. http://dx.doi.org/10.4028/www.scientific.net/amm.262.315.

Full text

Abstract:

The purpose of this study is to probe into the difference of the printing effect and paper wood that are put to use in the same theories of graphic design. On one side, by showing the property of the presswork, printing will increase in value in the whole new way. On the other side, to come at the characteristics of the printing and the effect of post-press makes the theories of graphic design being used boundlessly. The results show that the graphic designed effect will increase simply by making use of the effect of special printing and post-press properly. So this study may provide the printing and design industry with the consultation to create value of varied merchandise.

APA, Harvard, Vancouver, ISO, and other styles

21

Luo, Mingying. "Discussion on Redesign of Image from Digital Printing Process." Asian Journal of Social Science Studies 2, no. 2 (May 26, 2017): 45. http://dx.doi.org/10.20849/ajsss.v2i2.163.

Full text

Abstract:

Digital printing is an indispensable link in the modern printing technology. It is the traditional pre-press process on the transition to digital technology in imaging technology, the digital printing technology. Digital printing expounds digital image process in the design means and methods and their influences on the printing quality from the angle of separation method, image processing method, etc..

APA, Harvard, Vancouver, ISO, and other styles

22

Zhao, Ji Bin, and Xiu Li Li. "Testing and Research on Inking Properties of Offset Press." Advanced Materials Research 174 (December 2010): 319–22. http://dx.doi.org/10.4028/www.scientific.net/amr.174.319.

Full text

Abstract:

A new testing form was designed, in which the screens having gray scales and some solid blocks were included. The screens consist of gray scales from 0 to 100% of dot coverage, and the solid blocks also have coverage scales from 0 to 100%. Printing experiment was performed, and densities and dot coverage of specific places were measured and recorded. Based on the testing data, density or dot coverage undulation with printing impressions was indicated by curves. Furthermore analysis was taken. Dot gains in the same prints are not constant, which cause that saddle shape in prints. Some reasons from construction of press such as the gap of cylinder, swing of transferring roller and oscillation of oscillating rollers were brought out. Same values of ink presetting can not get the same printing quality in the ink zones which have the same graphic coverage. The traditional press has a long make-ready time in printing running, which can reduce the efficiency of press. Shaft-less technology of inking system is put forward to cut down the make-ready time and to decrease the power consumption. New algorithm research is necessary for ink zone presetting in order to get more precise ink feeding. Some research on the press construction is also important for the press having some inherent defects

APA, Harvard, Vancouver, ISO, and other styles

23

Galbraith, Steven K. "The Kelmscott/Goudy Printing Press: Printing History as a Living History." RBM: A Journal of Rare Books, Manuscripts, and Cultural Heritage 17, no. 1 (March 1, 2016): 15–16. http://dx.doi.org/10.5860/rbm.17.1.454.

Full text

Abstract:

The arrival of the Kelmscott/Goudy press to the Cary Graphic Arts Collection at the Rochester Institute of Technology in January 2014 was a homecoming of sorts. From 1932 to 1941, the press belonged to our library’s namesake, Melbert B. Cary, Jr., director of the Continental Type Founders Association in New York City. Cary used the press to produce the whimsical publications of his Press of the Woolly Whale. In addition to its connection with the press’s past, the Cary Collection offers a home where the press can be maintained and used in support of teaching and the book arts. To . . .

APA, Harvard, Vancouver, ISO, and other styles

24

Gordon, Andrew. "The Renaissance Footprint: The Material Trace in Print Culture from Dürer to Spenser." Renaissance Quarterly 71, no. 2 (2018): 478–529. http://dx.doi.org/10.1086/698139.

Full text

Abstract:

AbstractThis article argues that Renaissance print culture appropriated the cultural meanings of the footprint. The potent analogy between the printing press and printing foot informed Reformation debates over Christ’s footprints as objects of devotion and subjects of representation. In sixteenth-century England a model for investigative reading informed by Erasmian humanism was developed in the print projects of George Gascoigne and Edmund Spenser. Experimentation with effects of the press and the material environment of the page culminated in extensive play upon the material and metaphorical sign of the printing foot in Spenser’s “Amoretti.”

APA, Harvard, Vancouver, ISO, and other styles

25

Yoshida, Tsuguaki, Shinichiro Takagi, Yasuhiko Muto, and Teilong Shen. "Register Control of Rotogravure Printing Press." IEEJ Transactions on Industry Applications 128, no. 9 (2008): 1133–39. http://dx.doi.org/10.1541/ieejias.128.1133.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Kapratwar, Tushar, Siddhi Jadhav, Harshvardhan Uttarwar, Nirmity Bomidwar, and Shubham Patil. "Layout Improvement at a Printing Press." International Journal of Industrial Engineering 7, no. 3 (September 25, 2020): 9–24. http://dx.doi.org/10.14445/23499362/ijie-v7i3p102.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Castelvecchi, Davide. "Nanotube press: Printing technique makes nanotransistors." Science News 172, no. 12 (September 30, 2009): 182. http://dx.doi.org/10.1002/scin.2007.5591721208.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Yoshida, Tsuguaki, Shinichiro Takagi, Yasuhiko Muto, and Teilong Shen. "Register control of rotogravure printing press. Application of nonlinear control theory to sectional drive printing press." Electronics and Communications in Japan 94, no. 1 (December 22, 2010): 17–24. http://dx.doi.org/10.1002/ecj.10282.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Ritonga, Nurhikma, Neni Mulyani, and Rika Nofitri. "IMPLEMENTATION OF E-COMMERCE IN PERCETAKAN CITRA BERSAMA TANJUNGBALAI USING THE CRM METHOD." Jurnal Riset Informatika 4, no. 2 (March 6, 2022): 183–90. http://dx.doi.org/10.34288/jri.v4i2.369.

Full text

Abstract:

Citra Bersama Tanjungbalai Printing is a business engaged in selling printing products and services, established in 2006, located on Jalan Peninsula, Sirantau Village, Datuk Bandar District, Tanjungbalai City. The problem with Citra Bersama Printing is that it has not implemented an online sales system, it is difficult for customers to know about sales information in the printing press. There is no information system to carry out promotions, and the process of recording customer order data at the printing press is still doing it manually. Using the CRM method is a web-based printing product and service sales system that can help buyers find out various information and make it easier for buyers to place orders without coming directly to the printer. With the application of E-commerce using the CRM method, it can help Tanjungbalai Citra Bersama Printing carry out promotions and provide information related to the sale of products and services it markets to customers, and expand sales of products and services it markets because of promotional features, discount prices, customer data, live chat, and product ratings.

APA, Harvard, Vancouver, ISO, and other styles

30

Dowrick, D. J., J. Babor, W. J. Cousins, and R. I. Skinner. "Seismic isolation of a printing press in Wellington, New Zealand." Bulletin of the New Zealand Society for Earthquake Engineering 25, no. 3 (September 30, 1992): 161–66. http://dx.doi.org/10.5459/bnzsee.25.3.161-166.

Full text

Abstract:

This paper describes the seismic hazard near the Wellington Fault in Petone, and the measures taken to protect a new printing press made of brittle cast iron against earthquake attack. The printing press, owned by Wellington Newspapers, was located just 20 m from the Wellington Fault. Mounting the specially designed building housing the press on a seismic isolation system, lead-rubber bearings, reduced the estimated loads and deflections on the press by a factor of 8-10 compared with the non-isolated case. As a result the press should suffer only modest damage in earthquake shaking somewhat stronger than that required by the New Zealand earthquake code for the design of buildings.

APA, Harvard, Vancouver, ISO, and other styles

31

MCDONALD, J. DAVID. "Wet pressing and product quality: Review of previous pilot machine trials." July 2020 19, no. 7 (August 1, 2020): 369–74. http://dx.doi.org/10.32964/tj19.7.369.

Full text

Abstract:

The purpose of wet pressing is to remove water by mechanical means to consolidate the web and minimize the energy expended in the dryer section. In this process, paper is compacted and densified to degrees that impact end-use performance. Average density is increased by pressing, which has implications for grades where stiffness is important. The z-direction density gradients can affect printing and converting. Lastly, pressing affects surface quality of paper and its response to printing. Broadly speaking, the final press nip dominates the paper surface roughness and the early press nips affect printing performance.

APA, Harvard, Vancouver, ISO, and other styles

32

Farchiyah, Frieda. "ANALISIS PENGENDALIAN KUALITAS SPANDUK DENGAN METODE SEVEN QUALITY CONTROL TOOLS (7 QC) PADA PT. FIM PRINTING." Tekmapro : Journal of Industrial Engineering and Management 16, no. 1 (January 31, 2021): 36–47. http://dx.doi.org/10.33005/tekmapro.v16i1.187.

Full text

Abstract:

Percetakan adalah proses industri untuk memproduksi tulisan dan gambar secara masal, terutama dengan tinta di atas kertas dengan menggunakan mesin cetak. Kenyataannya saat ini masih banyak produk cacat yang ditemukan pada saat proses produksi. PT. FIM Printing yang menjadi obyek penelitian ini memproduksi jenis printing digital. Produk yang dihasilkan masih ditemui berbagai jenis cacat pada saat proses produksi dengan persentase reject mencapai 0,934%. Sedangkan, spesifikasi cacat yang sudah ditetapkan perusahaan sebesar 0,5%. Terdapat tiga jenis cacat yang ada pada FIM Printing yaitu cacat yang dikarenakan hasil pada proses cutting, printing, dan press panas. Maka dari itu, dibutuhkan suatu analisis yang dapat mempermudah perusahaan dalam mengetahui produk cacat. Tujuan dari penelitian ini yaitu melakukan analisis tentang pengendalian kualitas spanduk dengan menggunakan metode seven tools. Berdasarkan penelitian yang telah dilakukan terdapat tiga jenis kecacatan pada spanduk yaitu karena hasil cutting sebesar 29,1%, hasil printing sebesar 33,3%, dan hasil press panas sebesar 37,7%.

APA, Harvard, Vancouver, ISO, and other styles

33

de la Garza-Gil, Karina. "Early Printing in Cologne: Setting in Non-Sequential Order and Printing with a One-Pull Press." Quaerendo 49, no. 1 (March 26, 2019): 66–78. http://dx.doi.org/10.1163/15700690-12341431.

Full text

Abstract:

Abstract What was the relationship between the printing technology available to early printers in Cologne and the printing practices? I can demonstrate that the regular conceptions of setting method and printing practice, printing page-by-page with a one-pull press and setting text seriatim, are contradicted after the evaluation of material evidence of, so far, at least one Cologne: one of the first in-folio format editions in Cologne, printed by the first printer of the city, Ulrich Zell.

APA, Harvard, Vancouver, ISO, and other styles

34

More, Prof Roshan Singh, Mohd Sohel Raza, Pratik Sirsat, Vaibhav Ingale, Rahul Kurhade, and Dhananjay Ladole. "Research Paper on Screen Printing Machine for Cylindrical Shape." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (May 31, 2022): 3219–21. http://dx.doi.org/10.22214/ijraset.2022.43046.

Full text

Abstract:

Abstract: Screen printing is a technique of applying a pressure of certain quantity of colouring agent into a specified surface to form a text and lot of development is taken place. Screen printing has application in Wedding cards, Stickers printing, T-shirts, Business cards and textile industries. We have introduced a screen printing machine for cylindrical shape. Cylindrical Screen Printing equipment prints cylindrical objects with a flat printing screen. It works for printed objects like bottles, buckets, drums, etc. Cylindrical printing press can put a more thick, clear color than label printing. At the same time, with its direct color putting, an automatic cylinder printing equipment may finish the all printing process only needing you to put the object on the enter. Keywords: Screen Printing , cylindrical shape

APA, Harvard, Vancouver, ISO, and other styles

35

Greene, Annie. "The pioneers of print in the Ottoman Province of Mosul." Journal of Contemporary Iraq & the Arab World 14, no. 1 (June 1, 2020): 51–68. http://dx.doi.org/10.1386/jciaw_00018_1.

Full text

Abstract:

This article examines the emergence of printing and press culture in the Ottoman province of Mosul, arguing that the variety of printed production in Mosul city and Kirkuk was dictated by technological expertise, consumption patterns and cultural-linguistic preferences. Religious institutions like the French Dominicans and the Chaldean Patriarchate, the Ottoman state and wealthy local individuals supported the local press culture in northern Iraq. Printing in Mosul was multilingual, thus the production of Arab cultural modernity and the Nahda (Arab Renaissance) should be reconsidered within a context of several competing languages. In Kirkuk, while the print culture appeared monolingual, the fixed nature of printing hid a multilingual cultural sphere.

APA, Harvard, Vancouver, ISO, and other styles

36

Anderson, Emily R. "Printing the Bespoke Book." Nuncius 35, no. 3 (December 14, 2020): 536–60. http://dx.doi.org/10.1163/18253911-03503005.

Full text

Abstract:

Abstract In 1482, Erhard Ratdolt, a prominent German printer in Venice, issued the editio princeps of Euclid’s Elements. Ratdolt experimented with the new technology of printing to overcome the difficulty in arranging geometric diagrams alongside the text. This article examines the materials and techniques that Ratdolt used in his edition of Elements including his use of vellum, gold printing, and illumination for special copies as well as his use of woodcuts, movable type, and metal-cast diagrams. Significantly, the legacy of Ratdolt’s innovations continued almost one hundred years later in subsequent editions of Elements. In 1572, Camillo Francischini printed Federico Commandino’s Latin translation and commentary, and today, there are at least two surviving copies of this edition printed on blue paper. Both printers, Ratdolt and Francischini, used the printing press to produce unique and bespoke books using material and visual cues from luxury objects like illuminated manuscripts. These case studies of Euclid’s Elements brings together the fields of art history, history of the book, and the history of geometry, and analyzes the myriad ways that printers employed the printing press in the early modern period to elevate and modernize ancient, mathematical texts.

APA, Harvard, Vancouver, ISO, and other styles

37

Zatsepina, Ksenia I. "PERIODICAL PRESS AS A SUBJECT OF PUBLIC CONTROL OVER THE USSR JUDICIAL SYSTEM IN THE 1920S (BASED ON THE MATERIALS OF THE PERIODICAL PRESS OF WESTERN SIBERIA)." Vestnik Altaiskogo Gosudarstvennogo Pedagogiceskogo Universiteta, no. 52 (September 30, 2022): 80–86. http://dx.doi.org/10.37386/2413-4481-2022-3-80-86.

Full text

Abstract:

The author considers the regional periodical press as a subject of public control over the judicial system of Western Siberia in the 1920s. The features and role of the periodical press in carrying historical research are viewed. Based on changes in the nature and content of periodical printing materials, two periods of the formation of printing as a means of control are distinguished. The nature of violations and shortcomings of the judicial system are analyzed and the interaction of periodical press bodies and courts in the course of official investigations are examined. The role of periodicals in the control of the judicial system is determined.

APA, Harvard, Vancouver, ISO, and other styles

38

Gao, Zhen Qing, and Han Xu Sun. "Research on Gap Analysis and Compensation of Rollers in Printing Machine." Advanced Materials Research 765-767 (September 2013): 13–15. http://dx.doi.org/10.4028/www.scientific.net/amr.765-767.13.

Full text

Abstract:

Aiming to the disadvantages of traditional gap adjustment between rollers of printing machine, a method for gaps analysis and Compensation automatically was proposed. In this research, firstly the relationship between gap of rollers and the printing density is analyzed, established a theoretical model on the influence of the printing of the printing press, and a quantitative experimental. Secondly, constructs the analysis and compensation of process printing machine roller gap, and the actual cases are described. Finally, the method of automatic adjustment for gap can simplify the operations and has practical significance.

APA, Harvard, Vancouver, ISO, and other styles

39

Guo, Jun Zhong, Tian Tian Cai, and Shi Ying Zhao. "Control and Regulation of Following Pressure Regulating Device in Offset Press." Applied Mechanics and Materials 312 (February 2013): 762–65. http://dx.doi.org/10.4028/www.scientific.net/amm.312.762.

Full text

Abstract:

In this paper, the single and double eccentric combination of pressure regulation device in the offset press was as the object. A closed loop control system of printing pressure and a following pressure regulation device were designed. The rotation angle of eccentric bearing in plate cylinder and the length change of regulating screw were worked out by means of the vector relationship of pressure regulation. The influence on printing quality from the pressure regulation device was analyzed, and it provided a certain basis for the regulation and control of printing pressure.

APA, Harvard, Vancouver, ISO, and other styles

40

Li, Zhi Jie, Ye Chi Pang, and Ting Liang Chu. "Research on Printing Color Stability Control Method." Advanced Materials Research 174 (December 2010): 259–62. http://dx.doi.org/10.4028/www.scientific.net/amr.174.259.

Full text

Abstract:

This paper proposes an ceaseless compensation method for dot gain based on output characters in printing process, solving the problem of color variation in press controlling, and on the other hand, avoiding wastes made by plate-making and press equipment correction. This control method has a positive function for the working efficiency and technology improvement.

APA, Harvard, Vancouver, ISO, and other styles

41

Qi, Yuan Sheng, Yu Feng Ding, X. H. Wang, J. J. Li, and B. Zhang. "The Research and Implementation into Knowledge Reuse System of Product Design of Printing Press." Materials Science Forum 628-629 (August 2009): 43–48. http://dx.doi.org/10.4028/www.scientific.net/msf.628-629.43.

Full text

Abstract:

Aiming at the reuse of design knowledge, this paper proposes knowledge reuse technology for product design of printing press which is based on rule and case. An integrated software package with SQL Server which is Database Management System (DBMS) and VisualC++6.0 which is a kind of development tools has been developed. This software may be embedded in the environment of Solidworks to assist the designer to index correlative design knowledge and develop new product of printing press after modification.

APA, Harvard, Vancouver, ISO, and other styles

42

Zhao, Ji Bin, and Xiu Li Li. "Study on Registering Accuracy and Precision in Test of Printing Press." Applied Mechanics and Materials 117-119 (October 2011): 1736–39. http://dx.doi.org/10.4028/www.scientific.net/amm.117-119.1736.

Full text

Abstract:

The registering precision is one of the most important specifications in printing press. Many factors that may influence the registering precision including the construction of the printing press in design, the assembly precision in manufacturing stage, adjustment in process of operation, the wear and tear of the machine when it is in use, crawl of blanket and extension of sheet are all considered comprehensively. The mathematical models are built up to describe the register error of press. The algorithm of accuracy and precision of sheet-feeding and sheet-transferring is introduced. With the aid of image technology, the coordinates of marks can be obtained automatically, and the registering accuracy and precision can also be calculated.

APA, Harvard, Vancouver, ISO, and other styles

43

Tokyo Kikaz Seisakusho Ltd. "Light-Weight Keyless Rotary Letterpress Printing Press." JAPAN TAPPI JOURNAL 39, no. 7 (1985): 641–45. http://dx.doi.org/10.2524/jtappij.39.641.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

OTANI, Takushi. "Agents of change : Printing press and internet." Journal of Information Processing and Management 55, no. 4 (2012): 288–91. http://dx.doi.org/10.1241/johokanri.55.288.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Dunn Butterfoss, Frances. "Getting Published: Responding to the “Printing Press”." Health Promotion Practice 12, no. 1 (December 30, 2010): 8–11. http://dx.doi.org/10.1177/1524839910386783.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Prestholdt, Jeremy. "Gandhi's printing press: experiments in slow reading." Journal of the Indian Ocean Region 12, no. 2 (January 12, 2016): 229–31. http://dx.doi.org/10.1080/19480881.2015.1125089.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

YOSHIDA, Kiichi, and Kaoru GONJO. "The First Printing Press Made in Japan." International Conference on Business & Technology Transfer 2002.1 (2002): 183–84. http://dx.doi.org/10.1299/jsmeicbtt.2002.1.0_183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Dewar, James A. "The information age and the printing press." Ubiquity 2000, August (August 2000): 1. http://dx.doi.org/10.1145/347634.348784.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Desai, Gaurav. "Gandhi’s printing press: experiments in slow reading." Interventions 18, no. 5 (May 4, 2016): 757–59. http://dx.doi.org/10.1080/1369801x.2016.1173952.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Lan, M. S., and R. M. Panos. "Printing press configuration-a knowledge-based approach." IEEE Expert 5, no. 1 (February 1990): 65–73. http://dx.doi.org/10.1109/64.50858.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Printing-press'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles