Log in

Relevant bibliographies by topics / ProBase Hot / Journal articles

To see the other types of publications on this topic, follow the link: ProBase Hot.

Journal articles on the topic 'ProBase Hot'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'ProBase Hot.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Meng, Thomas R., and Mark A. Latta. "Physical Properties of Four Acrylic Denture Base Resisns." Journal of Contemporary Dental Practice 6, no. 4 (2005): 93–100. http://dx.doi.org/10.5005/jcdp-6-4-93.

Full text

Abstract:

Abstract Resistance to impact fracture and high flexural strength are desirable properties of denture base acrylics. The purpose of this laboratory study was to determine the Izod impact strength, the flexural strength, the flexural modulus, and the yield distance for four premium denture resins. Bar specimens 86 x 11 x 3 mm of Lucitone 199, Fricke Hi-I, ProBase Hot, and Sledgehammer Maxipack were fabricated following the manufacturer's instructions for heat processing. The bars were surface finished using silicon carbide paper to 600 grit. Ten specimens from three lots of each material were m

APA, Harvard, Vancouver, ISO, and other styles

2

Pina, Cátia, Joana Carvalho, Jorge Caldeira, and Sérgio Félix. "HPLC characterization of two resins used in removable prosthodontics: ProBase® hot and ProBase® cold." Annals of Medicine 51, sup1 (2019): 98. http://dx.doi.org/10.1080/07853890.2018.1562703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Costa, Marta, Sara Neves, Joana Carvalho, Sofia Arantes-Oliveira, and Sérgio Félix. "In Vitro Comparative Study of Microhardness and Flexural Strength of Acrylic Resins Used in Removable Dentures." Medical Sciences Forum 5, no. 1 (2021): 45. http://dx.doi.org/10.3390/msf2021005045.

Full text

Abstract:

Polymethylmethacrylate is the material of choice for prosthetic bases. Depending on the type of polymerization, acrylic resins may present some mechanical weaknesses that may lead to the failure of a prosthesis. The microhardness and flexural strength of a dental material determine its applicability. The objective of the present investigation was to evaluate the in vitro Knoop microhardness and flexural strength of a thermopolymerizable (Probase Hot) and an autopolymerizable (Probase Cold) resin, according to ISO 20759-1: 2013.

APA, Harvard, Vancouver, ISO, and other styles

4

Nascimento, Inês, Nuno Rodrigues dos Santos, Vitor Anes, Cristina Bettencourt Neves, and Virgínia Santos. "Effect of Thermal Aging and Chemical Disinfection on the Microhardness and Flexural Strength of Flexible Resins." Applied Sciences 14, no. 1 (2023): 361. http://dx.doi.org/10.3390/app14010361.

Full text

Abstract:

This article examines the effects of thermal aging and chemical disinfection on the microhardness and flexural strength of flexible resins. The influence of the resin type on the mechanical properties was also investigated. Two flexible resins, Deflex Classic SR and Deflex Supra SF, produced by the injection method, and a thermopolymerizable acrylic resin—ProBase Hot, produced by the flasking method, were subjected to 1000 cycles of thermal aging and three chemical disinfection protocols (n = 8), with daily immersion and during a recommended time, in Corega Whitening, Corega Oxygen Bio-Active,

APA, Harvard, Vancouver, ISO, and other styles

5

Рузиева, С.С., та Ш. Ж. Хамдамов. "Восстановление небной кости и верхней челюсти после осложнений COVID-19". Multidisciplinary Journal of Science and Technology 5, № 5 (2025): 1507–8. https://doi.org/10.5281/zenodo.15563620.

Full text

Abstract:

Во время пандемии COVID-19 было зарегистрировано значительное количество случаев мукормикоза, многие из которых требовали хирургического вмешательства. Чтобы предотвратить летальный исход, часто удаляли части челюстно-лицевой области, такие как альвеолярный отросток верхней челюсти, нёбо, содержимое глазницы и полость носа. В двух возрастных группах — 16–32 и 43–70 лет — наблюдался рост числа ранее недиагностированных и прогрессирующих дефектов челюстно-лицевой области. В клинике TMA общее число пролеченных пациентов увеличилось на 61,36%, при этом число первичных случа

APA, Harvard, Vancouver, ISO, and other styles

6

Maillet, Christina, Serge Odof, Mikaël Meuret, Florian Le Bras, Frédéric Velard, and Marie-Paule Gelle. "Non-Thermal O2 Plasma Efficacy on C. albicans and Its Effect on Denture Base Resin Color." Applied Sciences 11, no. 21 (2021): 10367. http://dx.doi.org/10.3390/app112110367.

Full text

Abstract:

Denture stomatitis is a disease involving C. albicans, which can affect elderly and immuno-compromised people. To avoid any recurrence of this pathology, it is necessary to treat patients regularly and disinfect dentures. However, the denture cleansers’ efficacy is not optimal and often leads to adverse color effects on the denture base resins. The aim of this study was to investigate the efficacy of a low-pressure non-thermal O2 plasma (NTP) treatment on C. albicans seeded on ProBase®Hot resin (Ivoclar Vivadent). The viability reduction of C. albicans was assessed by colony forming units (CFU

APA, Harvard, Vancouver, ISO, and other styles

7

AlAzzam, Njood F., Salwa O. Bajunaid, Heba A. Mitwalli, Bashayer H. Baras, Michael D. Weir, and Hockin H. K. Xu. "The Effect of Incorporating Dimethylaminohexadecyl Methacrylate and/or 2-Methacryloyloxyethyl Phosphorylcholine on Flexural Strength and Surface Hardness of Heat Polymerized and 3D-Printed Denture Base Materials." Materials 17, no. 18 (2024): 4625. http://dx.doi.org/10.3390/ma17184625.

Full text

Abstract:

Background: A major disadvantage of polymethyl methacrylate (PMMA) acrylic resins is susceptibility to biofilm accumulation. The incorporation of antimicrobial agents is a reliable prevention technique. The purpose of this study is to investigate the effect of incorporating dimethylaminohexadecyl methacrylate (DMAHDM) and/or 2-methacryloyloxyethyl phosphorylcholine (MPC) into heat-polymerized (HP) and 3D-printed (3DP) denture base materials on the flexural strength, modulus of elasticity, and surface hardness. Methods: DMAHDM and/or MPC were mixed with the acrylic resin liquid of a heat-polyme

APA, Harvard, Vancouver, ISO, and other styles

8

Ouni, Fedy, and Mounir Belloumi. "Pattern of road traffic crash hot zones versus probable hot zones in Tunisia: A geospatial analysis." Accident Analysis & Prevention 128 (July 2019): 185–96. http://dx.doi.org/10.1016/j.aap.2019.04.008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

EL SALEEBY, C., W. A. LYNN, and M. JAYANTHI. "Probable intracardiac tuberculoma in an HIV positive woman." Heart 81, no. 2 (1999): 181. http://dx.doi.org/10.1136/hrt.81.2.181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bédard, Emilie, Simon Lévesque, Philippe Martin, et al. "Energy Conservation and the Promotion ofLegionella pneumophilaGrowth: The Probable Role of Heat Exchangers in a Nosocomial Outbreak." Infection Control & Hospital Epidemiology 37, no. 12 (2016): 1475–80. http://dx.doi.org/10.1017/ice.2016.205.

Full text

Abstract:

OBJECTIVETo determine the source of aLegionella pneumophilaserogroup 5 nosocomial outbreak and the role of the heat exchanger installed on the hot water system within the previous year.SETTINGA 400-bed tertiary care university hospital in Sherbrooke, Canada.METHODSHot water samples were collected and cultured forL. pneumophilafrom 25 taps (baths and sinks) within wing A and 9 taps in wing B. Biofilm (5) and 2 L water samples (3) were collected within the heat exchangers forL. pneumophilaculture and detection of protists. Sequence-based typing was performed on strain DNA extracts and pulsed-fie

APA, Harvard, Vancouver, ISO, and other styles

11

Kurtz, D. W., H. Shibahashi, V. S. Dhillon, et al. "Hot DAVs: a probable new class of pulsating white dwarf stars." Monthly Notices of the Royal Astronomical Society 432, no. 2 (2013): 1632–39. http://dx.doi.org/10.1093/mnras/stt585.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Rani, Sharmila, Gajendra Pandey, Annapurni Subramaniam, Chul Chung, Snehalata Sahu, and N. Kameswara Rao. "AstroSat Study of the Globular Cluster NGC 2298: Probable Evolutionary Scenarios of Hot Horizontal Branch Stars." Astrophysical Journal 923, no. 2 (2021): 162. http://dx.doi.org/10.3847/1538-4357/ac2eb6.

Full text

Abstract:

Abstract We present the far-UV (FUV) photometry of images acquired with UVIT on AstroSat to probe the horizontal branch (HB) population of the Galactic globular cluster NGC 2298. UV-optical color–magnitude diagrams (CMDs) are constructed for member stars in combination with Hubble Space Telescope UV Globular Cluster Survey data for the central region and Gaia and ground-based photometric data for the outer region. A blue HB (BHB) sequence with a spread and four hot HB stars are detected in all FUV-optical CMDs and are compared with theoretical updated BaSTI isochrones and synthetic HB models w

APA, Harvard, Vancouver, ISO, and other styles

13

Rivinius, Th, R. Klement, S. D. Chojnowski, D. Baade, K. Shepard, and P. Hadrava. "MWC 656: A Be+BH or a Be+sdO?" Proceedings of the International Astronomical Union 18, S361 (2022): 332–33. http://dx.doi.org/10.1017/s1743921322002976.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Goward, G. W. "Low-Temperature Hot Corrosion in Gas Turbines: A Review of Causes and Coatings Therefor." Journal of Engineering for Gas Turbines and Power 108, no. 2 (1986): 421–25. http://dx.doi.org/10.1115/1.3239921.

Full text

Abstract:

In about 1975 an apparently new form of hot corrosion attack of gas turbine airfoils was identified during low-power, low-metal-temperature operation of a marine gas turbine. The rate of this corrosion was substantially greater at about 700° C than that usually observed for sulfate-induced hot corrosion at 800° to 1000° C. The same type of hot corrosion has been subsequently reported to occur in ground-based gas turbines, and is similar in principle to fireside corrosion of boiler tubes. This paper presents a review of probable mechanisms of this so-called low-temperature hot corrosion, of tes

APA, Harvard, Vancouver, ISO, and other styles

15

Redman, Matt P., K. A. Wills, T. W. B. Muxlow, and A. Pedlar. "Chimneys in the starburst galaxy M 82." Symposium - International Astronomical Union 193 (1999): 752–53. http://dx.doi.org/10.1017/s0074180900206748.

Full text

Abstract:

A new radio image of the core of the starburst galaxy M82 is presented. A pair of probable galactic chimneys are evident. Such structures have been conjectured to result when a giant shell of ionized gas breaks out of the dense plane of a galaxy and ejects hot gas into the halo. In M 82, the starburst activity drives a galactic superwind and theoretical models of this process require a knowledge of the kinematics of the hot gas in the core of the galaxy. The results presented here imply that the ejection of material into the base of the superwind does not occur smoothly over the starburst regi

APA, Harvard, Vancouver, ISO, and other styles

16

Poukens, Johan, and Nele Provoost. "Respectability, Middle-Class Material Culture, and Economic Crisis: The Case of Lier in Brabant, 1690–1770." Journal of Interdisciplinary History 42, no. 2 (2011): 159–84. http://dx.doi.org/10.1162/jinh_a_00210.

Full text

Abstract:

Poll-tax lists and probate inventories from the small town of Lier reveal an expanding middle class with an enduring investment in objects and activities that signaled prudence and trustworthiness. The middle class created a self-image of respectability by consuming hot drinks in tastefully decorated dining rooms and parlors. Rather than curbing the desire for novelty, the adverse economic conditions of the 1720s sharpened the relative importance of participation in activities that signified credibility.

APA, Harvard, Vancouver, ISO, and other styles

17

Baid, C. S., A. R. Varma, and M. Lakhotia. "A case of subacute effusive constrictive pericarditis with a probable amoebic aetiology." Heart 58, no. 3 (1987): 296–98. http://dx.doi.org/10.1136/hrt.58.3.296.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Shi, Zhao Xia, Jian Xin Dong, and Mai Cang Zhang. "Microstructure and Hot Tearing Susceptibility of K418 and K419 Superalloy for Auto Turbocharger Turbine Wheel." Materials Science Forum 747-748 (February 2013): 540–48. http://dx.doi.org/10.4028/www.scientific.net/msf.747-748.540.

Full text

Abstract:

K419 superalloy turbine wheel was more susceptible to hot tearing than K418 one when they were used for auto turbocharger turbine wheel. The fracture and microstructure characteristics in the K418 and K419 turbine wheel blades were analyzed. The segregation of alloying elements was analyzed by EDS. The probable equilibrium phases in the two kinds of superalloys, the effects of aluminum, titanium and niobium contents on the precipitation of γ and γ/γ eutectic phase and the segregation of alloying elements were studied by Thermo-Calc software. The results show that the hot tearing in the K418 an

APA, Harvard, Vancouver, ISO, and other styles

19

Shahsanaei, Majid, Sadegh Pour-Ali, Ali-Reza Kiani-Rashid, and Sannakaisa Virtanen. "Carbide Fragmentation and Dissolution in a High-Carbon High-Chromium Steel Using Hot Rolling Process: Microstructure Evolution, Wear, High-Temperature Oxidation, and Chloride-Induced Corrosion Properties." Corrosion 74, no. 9 (2018): 958–70. http://dx.doi.org/10.5006/2749.

Full text

Abstract:

A series of hot rolling processes with different reduction percentages (10%, 30%, and 50%) were applied to a high-carbon high-chromium tool steel (2HCTS). Microstructural evolutions, wear behavior, high-temperature oxidation, and aqueous corrosion properties were investigated. The results revealed the breakage and dissolution of primary carbides and a uniform carbide distribution after the hot rolling process. It was proposed that the presence of higher amounts of dissolved chromium in the hot rolled samples leads to the formation of Cr-rich oxides with more protection and less porosity at hig

APA, Harvard, Vancouver, ISO, and other styles

20

Zimmerman, Earl G., Edwin H. Liu, Michael H. Smith, and Michael C. Wooten. "Microhabitat variation in enzyme activities in the mosquitofish, Gambusia affinis." Canadian Journal of Zoology 66, no. 2 (1988): 515–21. http://dx.doi.org/10.1139/z88-074.

Full text

Abstract:

Standard activities of adenosine deaminase, aspartate aminotransferase, lactate dehydrogenase, and malate dehydrogenase, and levels of soluble body protein were determined for populations of the mosquitofish, Gambusia affinis, from four habitats classed as cold (ambient), hot, past-hot (thermal effluent received in the past), or usually hot but reactor down at time of sampling, based on their history of receiving thermal effluents from nuclear production reactors at the Savannah River Plant. Major contributors to enzyme activity variation were thermal history of the site, creek of origin, and

APA, Harvard, Vancouver, ISO, and other styles

21

Bamisaye, Olufemi Sylvester, Nthabiseng Maledi, Josias Van der Merwe, Desmond Edem Primus Klenam, Michael Oluwatosin Bodunrin, and Akeem Damilola Akinwekomi. "A comprehensive review on the deformation behavior of refractory high entropy alloys at elevated temperatures." Manufacturing Review 10 (2023): 12. http://dx.doi.org/10.1051/mfreview/2023008.

Full text

Abstract:

Thermo-mechanical processing of refractory high entropy alloys (RHEAs) at high temperatures is very important. It is an effective method of modifying the microstructure, properties, and shaping into final components after casting. Using the Scopus database, 57 articles relating to the hot deformation of refractory high entropy alloys were extracted from 2011 to 2022. Despite the limited number of articles on hot deformation of RHEAs, it is important to find out if the dominant softening mechanisms reported in other metallic alloys are evident. This is the main impetus for this study since the

APA, Harvard, Vancouver, ISO, and other styles

22

Gavriilaki, Eleni, Panagiotis Dolgyras, Sotiria Dimou-Mpesikli, et al. "Risk Factors, Prevalence, and Outcomes of Invasive Fungal Disease Post Hematopoietic Cell Transplantation and Cellular Therapies: A Retrospective Monocenter Real-Life Analysis." Cancers 15, no. 13 (2023): 3529. http://dx.doi.org/10.3390/cancers15133529.

Full text

Abstract:

(1) Background: Autologous, allogeneic hematopoietic cell transplantation (HCT) and other cellular therapies, including CAR T cell and gene therapy, constitute a cornerstone in the management of various benign and malignant hematological disorders. Invasive fungal infections (IFD) remain a significant cause of morbidity and mortality in HCT recipients. Therefore, we investigated the prevalence and risk factors of IFD following HCT and other cellular therapies in an era of novel antifungal prophylaxis. (2) Methods: In this study, we retrospectively enrolled adult HCT recipients who were treated

APA, Harvard, Vancouver, ISO, and other styles

23

Engin Demir, Abdurrahman, and Nazim Ata. "Hysteria as a Trigger for Epidemic Decompression Sickness Following Hypobaric Hypoxia Training." Aerospace Medicine and Human Performance 93, no. 10 (2022): 712–16. http://dx.doi.org/10.3357/amhp.6091.2022.

Full text

Abstract:

INTRODUCTION: Although hypobaric hypoxia training (HHT) is an essential component of aviation physiology training, it poses a risk of decompression sickness (DCS). DCS can sometimes be observed as a cluster of cases, which is referred to as epidemic DCS. In this report, we aim to evaluate an epidemic DCS episode that occurred following two consecutive HHT sessions.METHODS: A total of 16 trainees, all of whom were medical doctors, attended the aviation medicine training course in the aeromedical research and training center. They went through HHT in two sessions, each with eight trainees.RESULT

APA, Harvard, Vancouver, ISO, and other styles

24

Pavlova, O. N., S. M. Chernitsyna, S. V. Bukin, et al. "The Source of Thermophilic Bacteria in Lake Baikal Cold Sediments – Coastal Hydrotherms or Deep Fluids?" Microbiology 93, no. 3 (2024): 323–29. http://dx.doi.org/10.31857/s0026365624030079.

Full text

Abstract:

The sources of thermophilic bacteria revealed in cold Lake Baikal sediments are considered. Comparative analysis of the taxonomic position of thermophilic microorganisms from four terrestrial hot springs at Lake Baikal coast and from the bottom sediments associated with hydrocarbon discharge was carried out. The sequences of thermophilic microorganisms with the same taxonomic position were revealed both in the hot springs and bottom sediments. Some microbial species occurred only in the hydrotherm samples or only in those from the sediments. Gas-saturated fluids from the hydrocarbon generation

APA, Harvard, Vancouver, ISO, and other styles

25

Frolov, Evgenii N., Alexandra V. Gololobova, Alexandra A. Klyukina, et al. "Diversity and Activity of Sulfate-Reducing Prokaryotes in Kamchatka Hot Springs." Microorganisms 9, no. 10 (2021): 2072. http://dx.doi.org/10.3390/microorganisms9102072.

Full text

Abstract:

Microbial communities of the Kamchatka Peninsula terrestrial hot springs were studied using radioisotopic and cultural approaches, as well as by the amplification and sequencing of dsrB and 16S rRNA genes fragments. Radioisotopic experiments with 35S-labeled sulfate showed that microbial communities of the Kamchatka hot springs are actively reducing sulfate. Both the cultivation experiments and the results of dsrB and 16S rRNA genes fragments analyses indicated the presence of microorganisms participating in the reductive part of the sulfur cycle. It was found that sulfate-reducing prokaryotes

APA, Harvard, Vancouver, ISO, and other styles

26

Gedye, R. N., and J. B. Wei. "Article." Canadian Journal of Chemistry 76, no. 5 (1998): 525–32. http://dx.doi.org/10.1139/v98-075.

Full text

Abstract:

Several different reactions have been studied to determine whether they occur more rapidly than conventionally heated reactions at atmospheric pressure. Small rate enhancements have been observed for some reactions carried out under microwave reflux in a modified domestic microwave oven. The Knoevenagel reaction of acetophenone with ethyl cyanoacetate was shown to have a rate enhancement of 2.5 times. However this reaction showed no rate increase over conventional heating, at the same temperature, in a variable-frequency microwave oven. It is therefore probable that the small rate enhancements

APA, Harvard, Vancouver, ISO, and other styles

27

Zhao, Shiyang, and Kelin Ji. "Study on Hot Weather Operation Flight Test of Civil Aircraft Fuel System." Journal of Physics: Conference Series 2785, no. 1 (2024): 012047. http://dx.doi.org/10.1088/1742-6596/2785/1/012047.

Full text

Abstract:

Abstract As one of the important on-board systems of an airplane, the fuel system of a civil aircraft mainly supplies fuel to the engine and APU of the aircraft, and it is necessary to ensure that the pressure and flow rate of the fuel supply meets the needs of the engine and APU under each kind of probable operating conditions. This paper studies the specific requirements of the airworthiness regulations for the fuel system to work under hot climate conditions. At the same time, it explores how to show the compliance of the fuel system with the airworthiness regulations through the flight tes

APA, Harvard, Vancouver, ISO, and other styles

28

Nahid, Akter, Abul Hossion Md., Hoq Mahbubul, et al. "Electrical Characterization and Doping Uniformity Measurement during Crystalline Silicon Solar Cell Fabrication using Hot Probe Method." Engineering International 2, no. 1 (2014): 38–42. https://doi.org/10.18034/ei.v2i1.129.

Full text

Abstract:

The parameters of crystalline semiconductor such as types of semiconductor, uniformity of impurity concentration of doped wafer, majority charge carrier concentration, sheet resistivity of doped wafer surface play an important role in  solar  cell  fabrication  process  during  emitter  diffusion,  that  is  the  most critical step. In this paper, we have used a low cost in house made hot probe  measurement setup. A hot plate was used to heat up the wafer up to 100°C. Two k-type thermocouples were placed s

APA, Harvard, Vancouver, ISO, and other styles

29

Dimastiar, Moch Ardi, Ahmad Taufik, and Anne Zulfia Syahrial. "Failure Analysis of Tube Radiant Heater Hot Oil in Refinery Industry." MATEC Web of Conferences 269 (2019): 03013. http://dx.doi.org/10.1051/matecconf/201926903013.

Full text

Abstract:

Heater, known as a furnace or fired heater is used to heat the oil which flows through tubes around a flame. When the tubes are failed, the fired heater reliability is affected. This paper investigates the probable cause/ causes of the radiant tube failure in the fired heater. In that context, depth analysis is conducted as part of the investigative studies, involve visual observation and dimensional measurement, metallographic examination, and chemical analysis. Finally, it has been concluded that the tube radiant has mainly failed due to crevice corrosion. In the other side, spherodization a

APA, Harvard, Vancouver, ISO, and other styles

30

Kawano, Seiji, Eiji Tatsumi, Noriko Yoneda, et al. "Novel leukemic lymphoma with probable derivation from immature stage of natural killer (NK) lineage in an aged patient." Hematological Oncology 13, no. 1 (1995): 1–11. http://dx.doi.org/10.1002/hon.2900130102.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Leoni, Erica, Federica Catalani, Sofia Marini, and Laura Dallolio. "Legionellosis Associated with Recreational Waters: A Systematic Review of Cases and Outbreaks in Swimming Pools, Spa Pools, and Similar Environments." International Journal of Environmental Research and Public Health 15, no. 8 (2018): 1612. http://dx.doi.org/10.3390/ijerph15081612.

Full text

Abstract:

Legionella spp. is widespread in many natural and artificial water systems, such as hot water distribution networks, cooling towers, and spas. A particular risk factor has been identified in the use of whirlpools and hot tubs in spa facilities and public baths. However, there has been no systematic synthesis of the published literature reporting legionellosis cases or outbreaks related to swimming/spa pools or similar environments used for recreational purposes (hot springs, hot tubs, whirlpools, natural spas). This study presents the results of a systematic review of the literature on cases a

APA, Harvard, Vancouver, ISO, and other styles

32

Sarma, Phulen, and Daisy Phukan. "COMPARATIVE STUDY OF THE ANTINOCICEPTIVE ACTION OF AMITRIPTYLINE WITH FLUOXETINE AND EVALUATION OF THEIR PROBABLE MECHANISM OF THIS ACTION IN ALBINO MICE." International Journal of Pharmacy and Pharmaceutical Sciences 10, no. 11 (2018): 35. http://dx.doi.org/10.22159/ijpps.2018v10i11.27706.

Full text

Abstract:

Objective: The aim of our study was to compare the anti-nociceptive action of amitriptyline with fluoxetine and evaluation of their probable mechanism of anti-nociceptive action by observing their individual interactions with morphine, naloxone, yohimbine, and ondansetron.Methods: Albino mice weighing 25-35 grams were taken and divided into 12 groups. Group A-Control(distilled water), Group B-amitriptyline 20 mg/kg, Group C-fluoxetine 20 mg/kg, Group D-morphine 5 mg/kg, Group E-amitriptyline 20 mg/kg+ morphine 5 mg/kg, Group F-amitriptyline 20 mg/kg+ naloxone 3 mg/kg, Group G-amitriptyline 20

APA, Harvard, Vancouver, ISO, and other styles

33

Gieselmann, Astrid, Matthé Scholten, Jakov Gather, and Jochen Vollmann. "Forschungsvorausverfügungen bei Demenz: Medizinethische Überlegungen zur Aufklärungspflicht." Fortschritte der Neurologie · Psychiatrie 87, no. 04 (2019): 255–58. http://dx.doi.org/10.1055/a-0664-7980.

Full text

Abstract:

ZusammenfassungDer Deutsche Bundestag hat im November 2016 eine Änderung des Arzneimittelgesetzes beschlossen. Nach dieser Änderung soll gruppennützige Arzneimittelforschung mit nicht-einwilligungsfähigen Erwachsenen unter bestimmten Bedingungen erlaubt sein. Eine dieser Bedingungen ist, dass der Proband eine sogenannte Forschungsvorausverfügung abgefasst hat, in der er in die Studienteilnahme eingewilligt hat. Zudem soll der Proband vor der Abfassung der Forschungsvorausverfügung von einem Arzt über die Forschungsteilnahme aufgeklärt worden sein. Es ist die Auffassung vertreten worden, dass d

APA, Harvard, Vancouver, ISO, and other styles

34

Tang, Xiaoqiang. "An Overview of the Development for Cable-Driven Parallel Manipulator." Advances in Mechanical Engineering 6 (January 1, 2014): 823028. http://dx.doi.org/10.1155/2014/823028.

Full text

Abstract:

In the last two decades, cable-driven parallel robots have attracted a lot of attention in robot community as a hot topic of robot research. In this paper, the development of the cable-driven parallel manipulator is first introduced in general. Second, the latest advance in theory and applications of cable-driven parallel manipulator is presented in detail, especially some notable implementations. Finally, an other probable application foresight with this cable manipulator is proposed and discussed.

APA, Harvard, Vancouver, ISO, and other styles

35

Vashchishin, R. V., V. O. Shepelev, O. O. Litvinenko та A. B. Lozinsky. "ANGULAR BRIGHTNESS DISTRIBUTION OF QUASAR 3С268.4 AT DECAMETER WAVELENGTHS". Odessa Astronomical Publications 37 (27 листопада 2024): 100–102. https://doi.org/10.18524/1810-4215.2024.37.313643.

Full text

Abstract:

Using the URAN VLBI network, we studied an angular structure of the 3C268.4 quasar at the decameter wavelengths. It is shown, that the brightness distribution of the source in the decameter range differs significantly from the decimeter image of the quasar. At low frequencies, the source model consists of two extended components and a compact feature, whose sizes and positions coincide with the parameters of lobes and one of the hot spots of 3C268.4 observed in the decimeter range. The radio emission of the second hot spot at decameter wavelengths is quite weak and does not significantly affec

APA, Harvard, Vancouver, ISO, and other styles

36

Harmanec, P., J. Lipták, P. Koubský, et al. "A new study of the spectroscopic binary 7 Vul with a Be star primary." Astronomy & Astrophysics 639 (July 2020): A32. http://dx.doi.org/10.1051/0004-6361/202037964.

Full text

Abstract:

We confirmed the binary nature of the Be star 7 Vul, derived a more accurate spectroscopic orbit with an orbital period of 69.d4212±0.d0034, and improved the knowledge of the basic physical elements of the system. Analyzing available photometry and the strength of the Hα emission, we also document the long-term spectral variations of the Be primary. In addition, we confirmed rapid light changes with a period of 0.d5592, which is comparable to the expected rotational period of the Be primary, but note that its amplitude and possibly its period vary with time. We were able to disentangle only th

APA, Harvard, Vancouver, ISO, and other styles

37

Nahid, Akter, Afrin Sajia, Abul Hossion Md, Alamgir Kabir Md., Akter Shirin, and Hasan Mahmood Zahid. "Evaluation of Majority Charge Carrier and Impurity Concentration Using Hot Probe Method for Mono Crystalline Silicon (100) Wafer." International Journal of Advances in Materials Science and Engineering 4, no. 4 (2015): 13–21. https://doi.org/10.14810/ijamse.2015.4402.

Full text

Abstract:

Temperature  dependent  majority  charge  carrier  concentration  and  impurity  concentration  calculations done for p-type commercial (100) silicon wafer of thickness 200 µm where the wafer is heated by hot probe set  up.  By  solving  basic  conductivity  equation  of  semiconductor  and  Continuity  &  Poisson’s  equation thermally generated carrier  ∆p and Q are found respectively for the same temperature range 50°C-80°C with  

APA, Harvard, Vancouver, ISO, and other styles

38

Grigorieva, Elena A. "HUMAN HEALTH IN EXTREME TEMPERATURES: FORECAST AND RESULTS OF THE ASSESSMENT." Hygiene and sanitation 98, no. 11 (2019): 1279–84. http://dx.doi.org/10.18821/0016-9900-2019-98-11-1279-1284.

Full text

Abstract:

AnnotaIntroduction. To prevent climate-dependent diseases, it is important to identify relationships in the system “Climate and weather - human vital activity”, which is especially important in present conditions of significant climate change. The purpose of the work is to probate the methodology of forecasting the adverse impact of extremely hot weather on human health in the South of the Russian Far East. Material and Methods. Analysis of the synoptic situations was made on the basis of meteorological data for one observation time to the 34 weather stations in the South of the Russian Far Ea

APA, Harvard, Vancouver, ISO, and other styles

39

Vahdat, Armin, B. Posselt, G. G. Pavlov, P. Weltevrede, A. Santangelo, and S. Johnston. "Multiwavelength Pulsations and Surface Temperature Distribution in the Middle-aged Pulsar B1055–52." Astrophysical Journal 963, no. 2 (2024): 138. http://dx.doi.org/10.3847/1538-4357/ad20ca.

Full text

Abstract:

Abstract We present a detailed study of the X-ray emission from PSR B1055–52 using XMM-Newton observations from 2019 and 2000. The phase-integrated X-ray emission from this pulsar is poorly described by existing models of neutron star atmospheres. Instead, we confirm that, similar to other middle-aged pulsars, the best-fitting spectral model consists of two blackbody components, with substantially different temperatures and emitting areas, and a nonthermal component characterized by a power law. Our phase-resolved X-ray spectral analysis using this three-component model reveals variations in t

APA, Harvard, Vancouver, ISO, and other styles

40

Popov, Oleksii, Dmitry V. Shtansky, Vladimir Vishnyakov, et al. "Reaction Sintering of Machinable TiB2-BN-C Ceramics with In-Situ Formed h-BN Nanostructure." Nanomaterials 12, no. 8 (2022): 1379. http://dx.doi.org/10.3390/nano12081379.

Full text

Abstract:

Soft TiB2-BN-C hetero-modulus ceramics were sintered with the assistance of in-situ reactions during the hot pressing of TiN-B4C precursors. TiB2 formation was observed already after the hot pressing at 1100 °C, remaining the only phase identifiable by XRD even after sintering at 1500 °C. Analysis of reaction kinetics allows us to assume that the most probable reaction controlling stage is boron atoms sublimation and gas phase transfer from B4C to TiN. Reactive sintering route allows almost full densification of TiB2-BN-C composite ceramics at 1900 °C. The processes enable the formation of mul

APA, Harvard, Vancouver, ISO, and other styles

41

Braña Tobío, Teresa, Antonio Rial Boubeta, Xosé Gabriel Vázquez, Jesús Varela Mallou,, and Alberto García Carreira. "Estimación de la respuesta de los "no sabe/no contesta" en los estudios de inteción de voto." Revista Española de Investigaciones Sociológicas, no. 83 (March 4, 2024): 269–87. http://dx.doi.org/10.5477/cis/reis.83.269.

Full text

Abstract:

  La historia electoral en España nos pone en evidencia, generalmente desfavorable, la escasa validez, exactitud y sentido de algunas predicciones hechas por las encuestas electorales. Junto con problemas de representatividad sociopolítica o errores en la estructura de la entrevista, una fuente de error en dicha predicción es el escaso tratamiento estadístico de la falta de respuesta o datos missing. En este trabajo utilizaremos una encuesta preelectoral llevada a cabo en la Comunidad Gallega en julio de 1998, para evaluar la eficacia de cuatro tratamientos habituales de la falta d

APA, Harvard, Vancouver, ISO, and other styles

42

Ziari, Mohammad, Catherine Burke, Karen Matevosyan, Eugene P. Frenkel, Ravindra Sarode, and Yu-Min Shen. "Optical Density of 1.0 Is a Better Cutoff for Positive HIT Ab ELISA." Blood 114, no. 22 (2009): 3515. http://dx.doi.org/10.1182/blood.v114.22.3515.3515.

Full text

Abstract:

Abstract Abstract 3515 Poster Board III-452 Background Heparin-induced thrombocytopenia (HIT) is a clinicopathologic diagnosis based on pretest clinical assessment aided by the 4T score and confirmed by laboratory testing for the presence of anti-heparin-platelet factor 4 antibody (HIT Ab). Prompt and accurate diagnosis of HIT is paramount due to an extraordinary high risk of thrombosis and the inherent risk of bleeding and cost with the use direct thrombin inhibitors (DTI). The polyspecific enzyme linked immunosorbent assay (poly-ELISA) for the HIT Ab is the most commonly available test that

APA, Harvard, Vancouver, ISO, and other styles

43

Thulasingam, Mahalakshmy, Saras Singh, Dineshkumar Giriyappa, JamesThottyplackel Devasia, and Sonali Sarkar. "Arrack shops as probable hot spots of tuberculosis transmission in urban Puducherry, South India: An exploratory study." International Journal of Advanced Medical and Health Research 7, no. 1 (2020): 23. http://dx.doi.org/10.4103/ijamr.ijamr_123_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Bhaduri, Anirban, Lakshminarasimhan Krishnaswamy, Gautam R. Ullal, Mitradas M. Panicker та Ramanathan Sowdhamini. "Fold prediction and comparative modeling of Bdm1: a probable α/β hydrolase associated with hot water epilepsy". Journal of Molecular Modeling 9, № 1 (2003): 3–8. http://dx.doi.org/10.1007/s00894-002-0102-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Trevisani, M., A. Valero, and R. Mancusi. "Effectiveness of the Thermal Treatments Used for Curd Stretching in the Inactivation of Shiga Toxin-Producing O157 and O26Escherichia coli." BioMed Research International 2017 (2017): 1–10. http://dx.doi.org/10.1155/2017/1609836.

Full text

Abstract:

The kneading treatment of the fresh curd in hot water is a critical control point in the manufacturing of mozzarella. Factors such as the ratio between hot water and curd mass, the rheological properties, and the mixing and kneading activity affect the processing time and the internal temperature of the curd. The aim of this study was to investigate the effect of thermal treatments on the fate of Shiga toxin-producingEscherichia coli(STEC). Nine curd samples (weight 160–270 g) were artificially contaminated with O157 or O26 STEC and stretched in hot water (90–95°C) for 5–10 min. Depending on t

APA, Harvard, Vancouver, ISO, and other styles

46

Johnson, Michael E., Santosh K. Katiyar, and Thomas D. Edlind. "New Fks Hot Spot for Acquired Echinocandin Resistance inSaccharomyces cerevisiaeand Its Contribution to Intrinsic Resistance ofScedosporiumSpecies." Antimicrobial Agents and Chemotherapy 55, no. 8 (2011): 3774–81. http://dx.doi.org/10.1128/aac.01811-10.

Full text

Abstract:

ABSTRACTEchinocandins represent a new antifungal group with potent activity againstCandidaspecies. These lipopeptides inhibit the synthesis of β-1,3-glucan, the major cell wall polysaccharide. Acquired resistance or reduced echinocandin susceptibility (RES) is rare and associated with mutations in two “hot spot” regions of Fks1 or Fks2, the probable β-1,3-glucan synthases. In contrast, many fungi demonstrate intrinsic RES for reasons that remain unclear. We are usingSaccharomyces cerevisiaeto understand the basis for RES by modeling echinocandin-Fks interaction. Previously characterized mutati

APA, Harvard, Vancouver, ISO, and other styles

47

Khan, Haris Ali, Kamran Asim, Farooq Akram, Asad Hameed, Abdullah Khan, and Bilal Mansoor. "Roll Bonding Processes: State-of-the-Art and Future Perspectives." Metals 11, no. 9 (2021): 1344. http://dx.doi.org/10.3390/met11091344.

Full text

Abstract:

Roll bonding (RB) describes solid-state manufacturing processes where cold or hot rolling of plates or sheet metal is carried out for joining similar and dissimilar materials through the principle of severe plastic deformation. This review covers the mechanics of RB processes, identifies the key process parameters, and provides a detailed discussion on their scientific and/or engineering aspects, which influence the microstructure–mechanical behavior relations of processed materials. It further evaluates the available research focused on improving the metallurgical and mechanical behavior of b

APA, Harvard, Vancouver, ISO, and other styles

48

Eckert, Dominique. "X-raying the Hubble Frontier Fields cluster Abell 2744." Proceedings of the International Astronomical Union 11, A29B (2015): 760–63. http://dx.doi.org/10.1017/s1743921316006748.

Full text

Abstract:

AbstractAbell 2744 was the first HFF cluster completed. It displays a fascinating complexity in its distribution of dark and luminous matter, which led to its nickname of the Pandora cluster. In late 2014 we obtained a deep (110 ks) observation of this cluster with XMM-Newton, with the aim of making a detailed comparison between the optical, X-ray and lensing properties of this system. The new X-ray observation unveiled the presence of three hot gas filaments extending on scales of several Mpc and connected to the cluster core. The X-ray structures coincide spatially with the distribution of g

APA, Harvard, Vancouver, ISO, and other styles

49

Wilmshurst, P., and P. Da Costa. "Probable right ventricular dysplasia and patent foramen ovale presenting with cyanosis and clubbing in a patient with characteristics of Noonan syndrome." Heart 74, no. 4 (1995): 471–75. http://dx.doi.org/10.1136/hrt.74.4.471.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Bublik, Vladimir T., Mikhail G. Lavrentev, Vladimir B. Osvenskii, Yuri N. Parkhomenko, and Nataliya Yu. Tabachkova. "Structure formation by hot extrusion of thermoelectric bismuth chalcogenide solid solution rods." Modern Electronic Materials 5, no. (4) (2019): 181–85. https://doi.org/10.3897/j.moem.5.4.52932.

Full text

Abstract:

Major advantage of extruded Bi<sub>2</sub>Te<sub>3</sub> based thermoelectric materials is high mechanical strength compared with that of melt-crystallized materials. Mechanical properties are of special importance for thermogenerator module applications where thermogenerator branches may undergo elevated thermal stresses due to large temperature differences at the modules. Since extrusion is typically a high-temperature process the structure of extruded materials is controlled by the plastic deformation in multiple slip systems resulting in the formation of a final deformed structure. The gra

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!