Log in

Relevant bibliographies by topics / Processes of the formation of fillets

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Processes of the formation of fillets'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Processes of the formation of fillets.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Processes of the formation of fillets"

1

Křížek, Martin, František Vácha, Pavel Vejsada, and Tamara Pelikánová. "Formation of biogenic amines in fillets and minced flesh of three freshwater fish species stored at 3 °C and 15 °C." Acta Veterinaria Brno 80, no. 4 (2011): 365–72. http://dx.doi.org/10.2754/avb201180040365.

Full text

Abstract:

The aim of the present study was to compare the dynamics of biogenic amines formation in three freshwater fish species, to compare the progress of chemical changes in filleted and minced flesh, to find correlations of such changes with sensory properties and to find possible quality indicators for selected fish species. Samples (n = 156) of fish fillets and fish mince of common carp (Cyprinus carpio), rainbow trout (Oncorhynchus mykiss) and perch (Perca fluviatilis) were stored at 3 °C and 15 °C. The amines were determined as the N-substituted benzamides, after derivatization with benzoylchlor

APA, Harvard, Vancouver, ISO, and other styles

2

Domiszewski, Zdzisław, Sylwia Mierzejewska, Iwona Michalska-Pożoga, Klaudia Rybka, and Tomasz Rydzkowski. "Effect of Graphene and Graphene Oxide Addition to Polyethylene Film on Lipid Quality of African Catfish (Clarias gariepinus) Fillets During Refrigerated Storage." Coatings 14, no. 12 (2024): 1506. http://dx.doi.org/10.3390/coatings14121506.

Full text

Abstract:

The purpose of this study was to investigate the effect of the addition of graphene (G) and graphene oxide (GO) to polyethylene film on the lipid oxidation level and sensory quality of African catfish fillets during refrigerated storage. The study was conducted on de-skinned fillets from a local farm. A composite film with 0.1%, 0.6%, and 1% G nanoplatelets and 0.1% GO nanoplatelets was used to package the fillets. The film was obtained using the free-blowing vertical upward method. The fillets were stored in polyethylene bags at 4 °C, and tests were conducted on the day of packaging and after

APA, Harvard, Vancouver, ISO, and other styles

3

Tsevdou, Maria, George Dimopoulos, Athanasios Limnaios, Ioanna Semenoglou, Theofania Tsironi, and Petros Taoukis. "High Pressure Processing under Mild Conditions for Bacterial Mitigation and Shelf Life Extension of European Sea Bass Fillets." Applied Sciences 13, no. 6 (2023): 3845. http://dx.doi.org/10.3390/app13063845.

Full text

Abstract:

High pressure is an industrially established food preservation process applied for the minimal processing or cold pasteurization of chilled, fresh, or ready-to-eat products. This study aimed to quantify the effectiveness of high pressure on the inactivation of spoilage microflora and the shelf life extension of European sea bass (Dicentrarchus labrax) fillets. Fish fillets were subjected to mild, high pressure conditions (100–400 MPa; 3–25 °C; 5–10 min) and then stored at 0.0 ± 0.2 °C. Their shelf life was evaluated in terms of their microbiological, physicochemical, and sensorial quality. The

APA, Harvard, Vancouver, ISO, and other styles

4

Salenko, Oleksandr, Sergiy Klymenko, Vadum Orel, Volodymyr Kholodny, and Natalya Gavrushkevich. "Using the functional approach in the development of hybrid processes in engineering: theoretical base." Mechanics and Advanced Technologies 6, no. 1 (2022): 41–55. http://dx.doi.org/10.20535/2521-1943.2022.6.1.260938.

Full text

Abstract:

The principles of creating hybrid processing processes based on the functional approach are given. It is proposed to consider the formation of individual elements of the product (planes, holes, fillets, ledges) through functions that are provided by a combination of such elements. At the same time, the required depth of technological influences is analyzed, based on which a set of influences that are different in nature, but compatible, on some basic carrier, is selected. It is proposed to use a high-speed liquid flow as such a carrier. Hybridization of a tool based on a water jet of small dia

APA, Harvard, Vancouver, ISO, and other styles

5

Shilo, E. I. "On the relationship between hypertrophy and hyperplasia of muscle fibers in postnatal myogenesis in fish of the Cyprinid family." Trudy VNIRO 185 (December 27, 2021): 45–56. http://dx.doi.org/10.36038/2307-3497-2021-185-45-56.

Full text

Abstract:

The concept of muscle tissue growth as a chain of successive interdependent events makes it possible to develop a system of regulatory factors influencing the nutrition and growth of fish, their health and productive qualities. In bony fish, the primary and secondary generation of muscle fibers occurs at the embryonic and postembryonic stages of development, respectively. Unlike mammals and birds, the postnatal development of fish is accompanied by hypertrophy and hyperplasia of muscle tissues throughout their life, which determines the specificity of the growth of their muscle tissue and affe

APA, Harvard, Vancouver, ISO, and other styles

6

Ziyamukhamedova, Umida, Lutfullo Bakirov, Sardor Donaev, Gavkhar Miradullaeva, and Elbek Turgunaliev. "Study of structure formation processes in matrices of mixed components with reinforcing natural fillers." E3S Web of Conferences 401 (2023): 05074. http://dx.doi.org/10.1051/e3sconf/202340105074.

Full text

Abstract:

The article presents the results of a study on the development of compositions of heterocomposite materials based on natural dispersed and reinforcing fillers. Using the mechano-chemical modification method, structures were obtained that ensure the compatibility of elements of heterocomposites at the interfacial level at the interface of complex phases where components of different nature and composition are present. By studying the wetting process of the reinforcing filler - spruce fiber obtained from waste, the concentration of the chemical modifier was selected. It has been established that

APA, Harvard, Vancouver, ISO, and other styles

7

Kazmirchuk, Nataliia, Oksana Korobko, Svetlana Semenova, and Olena Rozhniuk. "Role of Activation in Formation of Polymer Composite Properties." Key Engineering Materials 864 (September 2020): 191–97. http://dx.doi.org/10.4028/www.scientific.net/kem.864.191.

Full text

Abstract:

The possibility of increasing crack resistance, strength and elastic modulus of polymer-containing compositions due to the directed organization of their structure by internal, external and complex activation is investigated. Filled polymer compositions are presented as open complex dynamic systems. This made it possible to use rational fillers and special matrix-transformer of external electromagnetic influences as factors for controlling the processes of their structure formation and hardening to obtain materials with the required properties.

APA, Harvard, Vancouver, ISO, and other styles

8

Pivnenko, Tat'yana, Yuliya Mihaylovna Pozdnyakova, Roman Vladimirovich Esipenko, and Evgeny Valerevich Mikheev. "INFLUENCE OF STORAGE AND HEAT TREATMENT PROCESSES OF BLACK GRENADIER ON QUALITY INDICATORS OF RAW FISH AND FINISHED PRODUCT." Bulletin of KSAU, no. 12 (January 27, 2025): 248–56. https://doi.org/10.36718/1819-4036-2022-12-248-256.

Full text

Abstract:

The purpose of research is to study the dependence of the quality of raw and finished products from a promising for fishing and processing deep-sea fish species – black grenadier Coryphaenoides acrolepis – on processing and storage conditions. The fish was caught in the South Kuril subzone of the Sea of Okhotsk at a depth of 1000 m. Tasks: determination of the size-mass composition, functional-technological and physical and chemical properties of muscle tissue of two size groups of this species, the study of the rheological parameters of raw fish before and after heat treatment at various cutt

APA, Harvard, Vancouver, ISO, and other styles

9

Zagorodnjuk, L. K., and D. A. Sumskoy. "Study of the Hydration Processes of Modified Binders by Infrared Spectroscopy." Materials Science Forum 974 (December 2019): 49–54. http://dx.doi.org/10.4028/www.scientific.net/msf.974.49.

Full text

Abstract:

Many Russian and foreign scientists have been studying the processes of hydration of cement binders, but the processes of binders hydration with the use of mineral and organic additives have not been studied enough. The question of the superplasticizers influence on binder compositions consisting of cement and various mineral fillers requires a deep and detailed study in each case. In this regard, the aim of this work is to study the processes of portland cement hydration, modified by organomineral additive. Research was carried out on the study of changes occurring during the structure format

APA, Harvard, Vancouver, ISO, and other styles

10

DANYLKOVYCH, АNATOLII, VIKTOR LISHCHUK, and OLGA SANGINOVA. "FORMATION OF LEATHER FILLED WITH MODIFIED SYNTAN AND TANIDE COMPOSITION." Herald of Khmelnytskyi National University. Technical sciences 319, no. 2 (2023): 88–93. http://dx.doi.org/10.31891/2307-5732-2023-319-1-88-93.

Full text

Abstract:

The technology of manufacturing leather material for the upper of shoes from semi-finished chrome tanning obtained from raw cow hides been has been developed. The technology at the filling-plasticization stage involves the use of a syntane-tanide composition modified with alkylcarboxyethanolamine of aliphatic acids of fraction C7–9. The filling and plasticizing composition includes syntanе BNS TU 17-06-165-89 and mimosa extract tanids with a content of the main substance of 81.7%. The semi-finished product is plasticized with Fosfol L-1301 emulsion of Cromogenia Units, S.A., Spain. Chemical re

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Processes of the formation of fillets"

1

Swinney, Tyler C. "Sources of Variability in Ceramic Artifacts Recovered from Refuse-Filled Pit Features at the Hahn’s Field Site, Hamilton County, Ohio." University of Cincinnati / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1427983448.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Вишнепольский, Е. В. "Повышение прочностных характеристик поверхности сопряжения отверстия и тонкостенного вала газотурбинного двигателя (ГТД)". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11252.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Haynes, Jamie. "Processes of granulite formation, West Greenland." Thesis, University of Oxford, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390527.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Elfsberg, Jessica. "Oscillation Mark Formation in Continuous Casting Processes." Licentiate thesis, KTH, Casting of Metals, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1653.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Landström, Lars. "Formation of nanoparticles by laser-activated processes." Doctoral thesis, Uppsala University, Department of Materials Chemistry, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3454.

Full text

Abstract:

<p>Due to the small dimensions, nanoparticles and materials consisting of nano-sized building blocks exhibit unique — mostly superior — properties, well differing from their bulk counterpart. Most of the novel properties of nanoparticles (and nanomaterials) are size-dependent, while the majority of the common gasphase methods used for generation of nanopowders result in different, usually wide, size-dispersions. Further understanding of the fundamental processes leading to particle formation is therefore required, leading to better control of size and distribution of the nanoparticles, thus al

APA, Harvard, Vancouver, ISO, and other styles

6

Landström, Lars. "Formation of nanoparticles by laser-activated processes /." Uppsala : Acta Universitatis Upsaliensis : Univ.-bibl. [distributör], 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Zhou, Quanbao. "Spray formation processes within agricultural flat fan nozzles." Thesis, University of Birmingham, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.511470.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Morton, Allan Gavin Thayer. "Archaeological site formation : experiments in lake margin processes." Thesis, University of Cambridge, 1995. https://www.repository.cam.ac.uk/handle/1810/273051.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Vogler, Nina-Christin. "Formation of a bath - Geological processes in Architecture." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/34943.

Full text

Abstract:

Geological processes define every place on earth. They tell us their story of formation, of shaping events that have long passed and about current conditions that continue to form the place. Each place therefore reveals its historical events and points towards its future. Man manipulates these processes and often ends the dialog between the past and the future. I wanted to explore an architecture related to this dialog, that occupies a site but also enters its existence and future. Erosion is the all-encompassing term for the processes that constantly sculpt and ultimately wear down the landsc

APA, Harvard, Vancouver, ISO, and other styles

10

Yin, Jie. "Photophysical studies of intramolecular excimer formation." Thesis, Lancaster University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.332399.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Processes of the formation of fillets"

1

Hartmann, Lee. Accretion processes in star formation. 2nd ed. Cambridge University Press, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

K, Paddayya, Jhaldiyal Richa, Deo Sushama G, and Deccan College Post-graduate and Research Institute., eds. Formation processes and Indian archaeology. Deccan College Post-Graduate and Research Institute, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wicks, Zeno W. Film formation. Federation of Societies for Coatings Technology, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lena, Raffaello. Lunar Domes: Properties and Formation Processes. Springer Milan, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Caporaso, Alicia, ed. Formation Processes of Maritime Archaeological Landscapes. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-48787-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Keim, Sylvia. Social Networks and Family Formation Processes. VS Verlag für Sozialwissenschaften, 2011. http://dx.doi.org/10.1007/978-3-531-93173-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Schiffer, Michael B. Formation processes of the archaeological record. University of Utah Press, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Capuzzo-Dolcetta, Roberto, Cesare Chiosi, and Alberto di Fazio, eds. Physical Processes in Fragmentation and Star Formation. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0605-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Matoušek, Václav. Thermal processes and ice formation in rivers. Water Research Institute in the State Agricultural Pub. House, Prague, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kondratʹev, K. I͡A. Atmospheric aerosol properties: Formation processes and impacts. Springer, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Processes of the formation of fillets"

1

Ponomarenko, A. T., V. G. Shevchenko, and N. S. Enikolopyan. "Formation processes and properties of conducting polymer composites." In Filled Polymers I Science and Technology. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/3-540-52791-5_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mandel, Rolfe D., Paul Goldberg, and Vance T. Holliday. "Site Formation Processes." In Encyclopedia of Geoarchaeology. Springer Netherlands, 2016. http://dx.doi.org/10.1007/978-1-4020-4409-0_147.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sullivan, Alan P., and William Flint Dibble. "Site Formation Processes." In Encyclopedia of Global Archaeology. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-30018-0_211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sullivan, Alan P., and William Flint Dibble. "Site Formation Processes." In Encyclopedia of Global Archaeology. Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4419-0465-2_211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Anesa, Patrizia. "Word-formation processes." In Lexical Innovation in World Englishes. Routledge, 2018. http://dx.doi.org/10.4324/9781351109352-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mandel, Rolfe D., Paul Goldberg, and Vance T. Holliday. "Site Formation Processes." In Encyclopedia of Geoarchaeology. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-44600-0_147-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ocskay, Gyula, Mátyás Jaschitz, and James Scott. "Borderland formation processes." In Border Cities and Territorial Development. Routledge, 2021. http://dx.doi.org/10.4324/9781003164753-13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Elmegreen, Bruce G. "Cloud Formation and Destruction." In Interstellar Processes. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3861-8_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Seab, C. Gregory. "Grain Destruction, Formation, and Evolution." In Interstellar Processes. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3861-8_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kyosev, Yordan. "Stitch Formation Process." In Sewing Machines and Processes. CRC Press, 2025. https://doi.org/10.1201/9781003293071-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Processes of the formation of fillets"

1

Osafune, Ryoji, Stephen Tate, and Jamison Leiss. "Sigma Embrittlement Evaluation Test for Dissimilar Welding Between F6NM and FXM-19." In AM-EPRI 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p0843.

Full text

Abstract:

Abstract In dissimilar welds between martensitic stainless steel F6NM and nitrogen-strengthened austenitic stainless steel FXM-19, type 209 austenitic welding consumables are used to align with the mechanical properties and chemical composition of FXM-19, with F6NM welds requiring post-weld heat treatment (PWHT) to restore ductility and toughness, raising concerns about sigma embrittlement in ER209 butter welds. This study investigated the mechanical properties and microstructure of F6NM+FXM-19 dissimilar welds, finding no detrimental sigma phase formation in the butter (PWHT) and groove weld

APA, Harvard, Vancouver, ISO, and other styles

2

Borenstein, S. W., and D. C. White. "Influence of Welding Variables on Microbiologically Influenced Corrosion of Austenitic Stainless Steel, Weldments." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89183.

Full text

Abstract:

Abstract Biofilms develop on metallic surfaces in contact with natural waters. Biofilms can contain microorganisms which accelerate corrosion. The chemical composition and microstructure of weldments, as produced by welding processes and heat treatment, can influence the degree of accelerated corrosion. It may be possible to avoid costly pitting failures if the weldment could be less susceptible to microbiologically influenced corrosion (MIC) by proper selection of filler metal, welding process variables, or heat treatment. Field testing and subsequent laboratory electrochemical analyses were

APA, Harvard, Vancouver, ISO, and other styles

3

Colahan, Martin, David Young, Marc Singer, and Ricardo P. Nogueira. "Black Powder Formation by Dewing and Hygroscopic Corrosion Processes." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09029.

Full text

Abstract:

Abstract The presence of black powder in natural gas pipelines can lead to equipment erosion, valve failure, instrumentation malfunction, and increased pressure drop. However, despite its impact on downstream and midstream operations, black powder production is poorly understood. In the present work, black powder formation as a result of corrosion was investigated by simulating sales gas conditions in a glass cell. Steel specimens were systematically exposed to a range of CO2, H2S, and O2 partial pressures at differing water condensation rates. The potential for hygroscopic material assisting

APA, Harvard, Vancouver, ISO, and other styles

4

TerHeege, J. H. "Natural Sealing of Leaky Wells by Creep of Rocksalt." In 58th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2024. http://dx.doi.org/10.56952/arma-2024-0257.

Full text

Abstract:

ABSTRACT: Wells drilled through salt formations can be subject to leakage if a (micro)annulus is present between the salt formation and well casing that allows significant fluid flow over large well sections. Laboratory experiments were performed to assess if natural sealing by rocksalt creep can close flow paths over such a salt-casing annulus. The experiments were performed on a scaled down well system consisting of a casing in a hollow salt sample that was placed in a triaxial deformation apparatus. The applied experimental conditions were equivalent to conditions of Zechstein salt at ∼2.5

APA, Harvard, Vancouver, ISO, and other styles

5

Borisov, Yu, V. Korzhik, I. Sviridova, and A. Skorokhod. "Influence of a Filler Composition and Conditions of Flame Spraying on a Structure and Mechanical Properties of Composite Polymer Coatings." In ITSC 1997, edited by C. C. Berndt. ASM International, 1997. http://dx.doi.org/10.31399/asm.cp.itsc1997p0239.

Full text

Abstract:

Abstract In thermal spraying of metal-polymer coatings, the processes of polymers oxidation and destruction can have special features, as the temperature of heating of the filler particles can significantly exceed the temperature of destruction of the polymer binder. Hence, the need to study the features of the process of formation of thermal sprayed coatings from filled polymers and their physico-chemical, mechanical and service properties. This paper describes the influence of a filler composition and conditions of flame spraying on a structure and mechanical properties of composite polymer

APA, Harvard, Vancouver, ISO, and other styles

6

Pribaturin, N., S. Lezhnin, A. Sorokin, D. Arhipov, M. Bykov, and D. Posusaev. "The Investigation of Shock Waves Forming by Disruption of Vessel With High-Enthalpy Coolant." In 18th International Conference on Nuclear Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/icone18-30297.

Full text

Abstract:

The physical and mathematical model of the shock wave formation and evolution in the outflow of a boiling coolant from a vessel filled with the high pressure water after depressurization was investigated. For mathematical description of the pressure waves formation processes the half-empirical relaxation model and the model of maximum superheating was used that is correspond to the description of the boiling processes as vaporization initiated by fluctuation nucleation. The amplitudes of the shock waves and the time dependencies of the pressure acting on the obstacles situated on different dis

APA, Harvard, Vancouver, ISO, and other styles

7

Kornilov, Sergey, Nikolay Rempe, and Anton Grishkov. "Simulation of the processes accompanying the formation and transportation of an electron beam in a gas-filled electron-optical system with a plasma emitter." In 2015 IEEE International Conference on Plasma Sciences (ICOPS). IEEE, 2015. http://dx.doi.org/10.1109/plasma.2015.7179843.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Zhou, J., H. L. Tsai, P. C. Wang, and R. Menassa. "Melt Flow and Porosity Formation in Pulsed Laser Keyhole Welding." In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56732.

Full text

Abstract:

Instead of CW (continuous wave) mode, pulsed mode laser welding has been popularly used in industry especially for Nd: YAG lasers. In pulsed mode laser keyhole welding, pores have been frequently observed near the root of the solidified weld. Our previous studies have indicated that the formation of porosity is caused by two competing mechanisms during the keyhole collapse process, and they are 1) the speed of solidification process for the melt surrounding the keyhole and 2) the speed of melt backfilling the keyhole. If the solidification process is too fast and completed before the keyhole i

APA, Harvard, Vancouver, ISO, and other styles

9

Belmonte, M., J. Llorente, M. I. Osendi, and P. Miranzo. "The Effective Role Played by Graphene Fillers for Improving the Tribological Properties of Ceramics." In BALTTRIB 2015. Aleksandras Stulginskis University, 2015. http://dx.doi.org/10.15544/balttrib.2015.31.

Full text

Abstract:

Nowadays, new materials with enhanced tribological properties are required to fulfil the new demanding working conditions of more efficient and eco-friendly industrial processes. To achieve this goal, we propose the addition of graphene nanofillers, a very attractive self-lubricating solid, to ceramic materials for improving their tribological responses. As proof of concept, here we present the role of the graphene nanoplatelets (GNPs) on the friction and wear resistance of two different graphene/ceramic nanocomposites, in particular, GNPs/silicon nitride and GNPs/silicon carbide materials. Th

APA, Harvard, Vancouver, ISO, and other styles

10

Antonov, P. V., I. E. O. Levshina, E. V. Lukina, and Yu V. Shokina. "Mass transfer processes during salting by injecting into the technology of delicate lightly salted salmon fillet." In Problems of the Arctic region. FRC KSC RAS, 2023. http://dx.doi.org/10.37614/978.5.91137.510.2.011.

Full text

Abstract:

The article presents the results of studies of salt diffusion transfer in the technology of lightly salted salmon fillets (rainbow trout, Atlantic salmon). The peculiarities of salt transfer in the thickness of a fillet-piece of fish during salting by injection are revealed. For the first time, the salt diffusion coefficients were experimentally determined for the salting of the rainbow trout fillet and Atlantic salmon by the injection salting method under selected conditions and technological modes. A reasonable conclusion is made about the existing differences in mass exchange processes when

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Processes of the formation of fillets"

1

Cheung, Kevin K. Tropical Cyclone Formation: Physical Processes and Predictions. Defense Technical Information Center, 2002. http://dx.doi.org/10.21236/ada627718.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Goldak, J. L51647 Welding on Fluid Filled and Pressurized Pipelines-Transient 3D Analysis. Pipeline Research Council International, Inc. (PRCI), 2000. http://dx.doi.org/10.55274/r0011356.

Full text

Abstract:

The objective of this project was to determine if research in Computational Weld Mechanics had matured to the stage where it could simulate the process of welding on a pressurized pipeline and provide useful estimates of the risk of burn-through. To achieve that objective we have compared the results of our FEM analyzes of several welds with the experimental data reported in "http://www.prci.com/publications/L51763.htm" PR-185-9515, Repair of Pipelines by Direct Deposition of Weld Metal: Further Studies. The temperature and deformation predicted by our FEM analysis agrees quite well with the e

APA, Harvard, Vancouver, ISO, and other styles

3

Liou, K. N., S. C. Ou, Y. Gu, P. Yang, and D. Frankel. Modeling of Cloud/Radiation Processes for Cirrus Cloud Formation. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada336787.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lin, M. C., and M. C. Heaven. Kinetics of Elementary Processes Relevant to Incipient Soot Formation. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/1063894.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

de Silva, Tim, Eugene Larsen-Hallock, Adam Rej, and David Thesmar. Expectations Formation with Fat-Tailed Processes: Evidence and Theory. National Bureau of Economic Research, 2025. https://doi.org/10.3386/w33808.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

DeVan, J. H., P. F. Tortorelli, R. R. Judkins, and I. G. Wright. Carbon formation and metal dusting in advanced coal gasification processes. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/663389.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Khomenko, Tetiana. TIME AND SPACE OF HISTORICAL PARALLELS OF EUGEN SVERSTIUK’S JOURNALISM. Ivan Franko National University of Lviv, 2021. http://dx.doi.org/10.30970/vjo.2021.50.11095.

Full text

Abstract:

The article is dedicated to the investigation of time-space measurements of journalistic works of Eugen Sverstiuk, a well-known Ukrainian journalist. In particular, the time-space continuum of his works is being discussed, which is characterized as comprehensive, continuous, filled with archetypical images which metaphorize the text, but at the same time structure it, and are beaded on the axis of time and documentarily located in the space. The logics of images initiated in the text is exaggerated by constant dwelling of the author in the time-space dimensions of the epoque, of which he was a

APA, Harvard, Vancouver, ISO, and other styles

8

Gray. L51567 Influence of Filler Wire Carbon and Residual Element Content on the Mechanical Properties. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0010565.

Full text

Abstract:

This study was conducted to determine the interactive roles of carbon, oxygen, and nitrogen and residual elements such as titanium, chromium, copper, sulfur, phosphorous, aluminum, tin, antimony, and arsenic on weld metal mechanical properties in pipeline steels. Eleven seamless, flux-core electrodes were fabricated with varying compositions and deposited in girth welds in a 24-inch diameter, API 5LX-65 pipe using the gas-metal-arc-weld (GMAW) process. The results of Charpy V-notch and crack-tip opening displacement tests indicate that desirable toughness properties may require the addition of

APA, Harvard, Vancouver, ISO, and other styles

9

Author, Not Given. (The formation of ordered microstructures by slip casting and related processes). Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/5877495.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Coppola, Lucia. Education and union formation as simultaneous processes in Italy and Spain. Max Planck Institute for Demographic Research, 2003. http://dx.doi.org/10.4054/mpidr-wp-2003-026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!