Relevant bibliographies by topics / Processing of shafts

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Processing of shafts'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Processing of shafts.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Processing of shafts"

1

Matseyn, Nikita P., and Nikolay V. Nosov. "Modeling the Deformation of Non-Rigid Shafts during Turning on CNC Machines." Materials Science Forum 1037 (July 6, 2021): 309–14. http://dx.doi.org/10.4028/www.scientific.net/msf.1037.309.

Full text
Abstract:
The purpose of this work is to increase the productivity and accuracy of processing long-length parts of the "shaft" type on CNC machines. Based on the analysis of existing methods for improving the accuracy of processing long shafts on CNC machines, a new method for controlling the spatial error of processing long shafts by changing the processing modes was proposed. The proposed method allows, by changing the processing modes, namely feed, to reduce the radial component of the cutting force and reduce the amount of deflection when machining parts on CNC machines. A technical and economic ana
APA, Harvard, Vancouver, ISO, and other styles
2

Tadjibayev, Rasul Karimovich Homidjonov Ma`murjon Ma`rufjon o`g`li. "PROCESSING OF LARGE LENGTH SHAFTS." INTERNATIONAL BULLETIN OF APPLIED SCIENCE AND TECHNOLOGY 3, no. 4 (2023): 813–18. https://doi.org/10.5281/zenodo.7860944.

Full text
Abstract:
Shafts over 1.5 m long can be classified as long. Those of them that have a length-to-diameter ratio of more than 10 can be classified as non-rigid. The most characteristic shafts of high precision are the rods of hydraulic cylinders, boreholes of boring machines, cylindrical guides, shafts and rolling pins of various mechanisms, sliding and rolling screws, etc. Processing of such products requires the use of additional devices in machines to overcome the effects of deformations under the influence of cutting forces and gravity, as well as the risk of self-oscillation.
APA, Harvard, Vancouver, ISO, and other styles
3

Bhargav Sai, Cherukuri, and D. Mallikarjuna Reddy. "Dynamic Analysis of Faulty Rotors through Signal Processing." Applied Mechanics and Materials 852 (September 2016): 602–6. http://dx.doi.org/10.4028/www.scientific.net/amm.852.602.

Full text
Abstract:
In this study, an effective method based on wavelet transform, for identification of damage on rotating shafts is proposed. The nodal displacement data of damaged rotor is processed to obtain wavelet coefficients to detect, localise and quantify damage severity. Because the wavelet coefficients are calculated with various scaled indices, local disturbances in the mode shape data can be found out in the finer scales that are positioned at local disturbances. In the present work the displacement data are extracted from the MATLAB model at a particular speed. Damage is represented as reduction in
APA, Harvard, Vancouver, ISO, and other styles
4

Zhu, Xia, Nagatoshi Okabe, Keiji Ogi, and Manabu Takahashi. "Fatigue Strength of Shaft with Diameter Enlarged Partially by Cyclic Bending and Axial Compressive Loading." Applied Mechanics and Materials 217-219 (November 2012): 2346–50. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.2346.

Full text
Abstract:
This paper experimentally and analytically investigates the fatigue strength and of mechanical damage of the processed shafts. First, we carry out rotary bending fatigue tests and investigate the fatigue strength for smooth specimens, specimen made only using cutting work, and specimens processed using a new plastic working developed originally. Secondly, we measure the Vickers hardness values to investigate strain hardening near the processed part. Finally, we simulate stress and strain distributions of the shaft during the processing using finite element method (FEM) and calculate the stress
APA, Harvard, Vancouver, ISO, and other styles
5

Shrinivas, Vijay, and Thillairajan Arumugam. "Failure Analysis of AISI H13 Shafts Used in Twin Screw Extruders during Fluoropolymer Compounding." Solid State Phenomena 345 (July 28, 2023): 193–99. http://dx.doi.org/10.4028/p-2j16od.

Full text
Abstract:
AISI H13 material finds wide use as screw shafts and screw elements in Twin Screw Extruders for Polymer Compounding applications owing to its high strength, excellent thermal shock resistance, high wear resistance and good fatigue strength. However, two AISI H13 shafts used in the Twin Screw Extruder supplied for fluoropolymer application experienced breakage after two years of service. Visual examination of broken shafts revealed deposits of processing material, rust marks and grooves at multiple locations on the shaft spline at the element to element butting zone. The location of breakage of
APA, Harvard, Vancouver, ISO, and other styles
6

Zhu, Xia, Keiji Ogi, Manabu Takahashi, Nagatoshi Okabe, and Kazuki Mori. "Basic Research on New Near-Net-Shape Working Method for Processing Multistage Shaft." Applied Mechanics and Materials 473 (December 2013): 35–38. http://dx.doi.org/10.4028/www.scientific.net/amm.473.35.

Full text
Abstract:
This paper proposes a new near-net-shape working method to partially enlarge and control shaft's cross section through a metal mold. This study investigates the changes in the sectional area of shafts during the processing under various processing conditions, and evaluates the changes with a filling ratio. We introduce the processing method and the processing conditions, and then we report the results of processing experiments. Lastly, we clarify that processing conditions influence on the geometry of the processed part.
APA, Harvard, Vancouver, ISO, and other styles
7

Anastasia Igorevna, Khokhryakova, Muzafarov Rais Salikhovich, and Shilyaev Sergey Alexandrovich. "DEVELOPMENT OF A METHOD FOR MECHANICAL PROCESSING OF RUBBER SHAFT FROM SOFT RUBBER FOR POLYGRAPHY EQUIPMENT." Chronos 6, no. 2(52) (2021): 62–66. http://dx.doi.org/10.52013/2658-7556-52-2-14.

Full text
Abstract:
The article discusses the current problem of machining a rubberized shaft from soft rubber, in particular turning, for printing equipment. During the processing of rubberized shafts with soft rubber, galling, burning, tearing of pieces of rubber and cutting ability of the cutter occur, sharpened cutters are not enough for a full passage along the entire length of the shaft.
APA, Harvard, Vancouver, ISO, and other styles
8

Jamal, Muhammad R. A. A., and Khaled S. Al Rasheed. "Vibration Measurement of a Rotating Shaft using Electrostatic Sensor." International Journal of Recent Technology and Engineering (IJRTE) 10, no. 3 (2021): 97–105. http://dx.doi.org/10.35940/ijrte.c6442.0910321.

Full text
Abstract:
Measuring Vibration parameter for rotating machinery is essential for monitoring and diagnosis system in industrial plants. This paper demonstrates another approach to vibration measurement for rotating machine using electrostatic sensor and signal processing techniques. A single electrostatic sensor is used to detect charges surrounding the moving shaft of the machine. The signal from the electrostatic sensor is processed in MATLAB using Autocorrelation, Fast-Fourier, and Root Mean Square. The implementation of this technical approach was conducted on a modified test rig using three different
APA, Harvard, Vancouver, ISO, and other styles
9

Muhammad, R. Jamal, and S. Al Rasheed Khaled. "Vibration Measurement of a Rotating Shaft using Electrostatic Sensor." International Journal of Recent Technology and Engineering (IJRTE) 10, no. 3 (2021): 97–105. https://doi.org/10.35940/ijrte.C6442.0910321.

Full text
Abstract:
Measuring Vibration parameter for rotating machinery is essential for monitoring and diagnosis system in industrial plants. This paper demonstrates another approach to vibration measurement for rotating machine using electrostatic sensor and signal processing techniques. A single electrostatic sensor is used to detect charges surrounding the moving shaft of the machine. The signal from the electrostatic sensor is processed in MATLAB using Autocorrelation, Fast-Fourier, and Root Mean Square. The implementation of this technical approach was conducted on a modified test rig using three different
APA, Harvard, Vancouver, ISO, and other styles
10

Qu, Li Ge. "Study on Processing Technology of Turbocharger Impeller and Shaft." Applied Mechanics and Materials 556-562 (May 2014): 1026–29. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.1026.

Full text
Abstract:
The processing technology of turbocharger impeller shaft involves shaft processing and Impeller processing two aspects of content. The design of casting impeller’s processing technology is based on reducing metal removal of the impeller dynamic balance. Casting impeller is an efficient method for the production of impellers, the dynamic balance of precision casting impeller itself can be used to achieve the use requirement of the impeller. It can meet the requirement of dynamic balance as the impeller rotation when the axis of impeller’s symmetry axis as locating datum in the process of machin
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Processing of shafts"

1

Dau, An. "How network processing shapes photoreceptor output." Thesis, University of Sheffield, 2013. http://etheses.whiterose.ac.uk/4854/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kempgens, Christian. "Factors influencing the processing of simple shapes." Thesis, Glasgow Caledonian University, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.547412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Бова, І. О., Віталій Геннадійович Євтухов, Виталий Геннадьевич Евтухов та Vitalii Hennadiiovych Yevtukhov. "Оптимізація технологічного процесу виготовлення деталі "Shaft A210-8710C"". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/61551.

Full text
Abstract:
При оптимізації технологічного процесу механічного оброблення заготовок важливу роль відіграє визначенні структури технологічної операції. Її визначення, а також вибір металорізального устаткування за умови забезпечення заданої якості оброблення заготовки зводиться до знаходження оптимального варіанту по продуктивності праці. При цьому відомо, що теоретична продуктивність праці залежить від циклових витрат часу, в які входить оперативний час, що складається з основного (машинного) та допоміжного часу.
APA, Harvard, Vancouver, ISO, and other styles
4

Rajan, Anita. "TiO₂/epoxy nanocomposites : effects of ultrasonic processing and particle shapes /." Available to subscribers only. Available to subscribers only, 2008. http://proquest.umi.com/pqdweb?did=1650511481&sid=5&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cheng, Yingchong. "Morphological classification of noisy shapes via external granulometries /." Online version of thesis, 1993. http://hdl.handle.net/1850/11990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kearney, John R. "A unique instrumentation system design for measuring forces on a rotating shaft." abstract and full text PDF (free order & download UNR users only), 2008. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1453646.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dinh, Huong Quynh. "Implicit shapes : reconstruction and explicit transformation." Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/8511.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

So, Wai-ki, and 蘇慧琪. "Shadow identification in traffic video sequences." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2005. http://hub.hku.hk/bib/B32045967.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bell, Jason. "An analysis of global shape processing using radial frequency contours." University of Western Australia. School of Psychology, 2008. http://theses.library.uwa.edu.au/adt-WU2008.0051.

Full text
Abstract:
Encoding the shape of objects within the visual environment is one of the important roles of the visual system. This thesis investigates the proposition that human sensitivity to a broad range of closed-contour shapes is underpinned by multiple shape channels (Loffler, Wilson, & Wilkinson, 2003). Radial frequency (RF) contours are a novel type of stimulus that can be used to represent simple and complex shapes; they are created by sinusoidally modulating the radius of a circle, where the number of cycles of modulation defines the RF number (Wilkinson, Wilson, & Habak, 1998). This thesis uses R
APA, Harvard, Vancouver, ISO, and other styles
10

So, Wai-ki. "Shadow identification in traffic video sequences." Click to view the E-thesis via HKUTO, 2005. http://sunzi.lib.hku.hk/hkuto/record/B32045967.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Processing of shafts"

1

United States. National Aeronautics and Space Administration., ed. Parallel processing of a rotating shaft simulation. NASA, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Whyatt, J. K. Microcomputer-based instrumentation system for monitoring ground support in a deep mine shaft. U.S. Dept. of the Interior, Bureau of Mines, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Center, Langley Research, ed. Analysis of 7- x 10-foot high speed wind tunnel shaft loads in support of fan blade failure investigation. National Aeronautics and Space Administration, Langley Research Center, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Center, Langley Research, ed. Analysis of 7- x 10-foot high speed wind tunnel shaft loads in support of fan blade failure investigation. National Aeronautics and Space Administration, Langley Research Center, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Center, Langley Research, ed. Analysis of 7- x 10-foot high speed wind tunnel shaft loads in support of fan blade failure investigation. National Aeronautics and Space Administration, Langley Research Center, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kanerva, Pentti. Contour-map encoding of shape for early vision. Research Institute for Advanced Computer Science, NASA Ames Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kanerva, Pentti. Contour-map encoding of shape for early vision. Research Institute for Advanced Computer Science, NASA Ames Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yin, Hezhu. Application of resistivity-tool-response modeling for formation evaluation. American Association of Petroleum Geologists, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Mineral Resources Development and Production. Oil shale mining claims: Hearing before the Subcommittee on Mineral Resources Development and Production of the Committee on Energy and Natural Resources, United States Senate, One Hundredth Congress, first session to consider the processing of oil shale mining claims and patents by the Department of the Interior under the Mining Law of 1872, October 16, 1987. U.S. G.P.O., 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Mineral Resources Development and Production. Oil shale mining claims: Hearing before the Subcommittee on Mineral Resources Development and Production of the Committee on Energy and Natural Resources, United States Senate, One Hundredth Congress, first session to consider the processing of oil shale mining claims and patents by the Department of the Interior under the Mining Law of 1872, October 16, 1987. U.S. G.P.O., 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Processing of shafts"

1

Yatsun, E. I., N. P. Anikeyeva, and I. S. Karnaukhov. "Tooling Backup of Cutting and Deforming Processing of Non-rigid Shafts." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22063-1_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Glikson-Simpson, Miryam. "Mining and Processing Oil Shales for Energy and Petroleum Production." In Oil Shales. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-60675-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Valuyskiy, Denis, Sergey Vityazev, and Vladimir Vityazev. "Radar Signal Processing for Shaft Rotation Monitoring." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0189-0_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Groppo, J. G. "Oil Shale Beneficiation for Processing." In Composition, Geochemistry and Conversion of Oil Shales. Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0317-6_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Ying, Yabo Zhang, and Yaxin Peng. "Enhanced Metric Learning via Dempster-Shafer Evidence Theory." In Neural Information Processing. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-04182-3_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Roberts, M. J., C. E. Snape, and S. C. Mitchell. "Hydropyrolysis: Fundamentals, Two-Stage Processing and PDU Operation." In Composition, Geochemistry and Conversion of Oil Shales. Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0317-6_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Descombes, Xavier, and Eugène Pechersky. "Wulff Shapes at Zero Temperature for Some Models Used in Image Processing." In Statistics and Analysis of Shapes. Birkhäuser Boston, 2006. http://dx.doi.org/10.1007/0-8176-4481-4_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Valuyskiy, Denis, Sergey Vityazev, and Vladimir Vityazev. "Shaft Rotation Monitoring Using Radar Signal Processing and Wavelet Transform." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. https://doi.org/10.1007/978-981-97-4359-9_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sevastjanow, Pawel. "Interval Comparison Based on Dempster-Shafer Theory of Evidence." In Parallel Processing and Applied Mathematics. Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-24669-5_87.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kim, Aleum, and Sung-Bae Cho. "Dempster-Shafer Fusion of Semi-supervised Learning Methods for Predicting Defaults in Social Lending." In Neural Information Processing. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-70096-0_87.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Processing of shafts"

1

Wang, Ye, Dan Wang, Cheng Chi, Zhentao Yu, Jianwei Li, and Bozhong Lei. "Wavelet Coherence Analysis of Ship Shaft-Rate Magnetic Field Signal." In 2024 9th International Conference on Intelligent Computing and Signal Processing (ICSP). IEEE, 2024. http://dx.doi.org/10.1109/icsp62122.2024.10743532.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Satish, Chandana Rayasandra, Katherine Rose Kilmer, Jean Jiang, Xibin Zhou, and Lizhe Tan. "Deep Learning Based Bearing Fault Detection Using Multi-Rate Signal Processing for Regulating Shaft Rotational Speed." In SoutheastCon 2025. IEEE, 2025. https://doi.org/10.1109/southeastcon56624.2025.10971711.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Abbasov, Vagif, Fariz Amirov, Samir Amirli, Shalala Hasanli, and Karel Frana. "Formation of Shaft Accuracy during Mechanical Processing on CNC Machines." In 2nd International Scientific-Practical Conference "Machine Building and Energy: New Concepts and Technologies". Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-n5ukb8.

Full text
Abstract:
The article discusses the study of the deformation of shafts with a diameter of ø30mm and a length of 400 mm during processing on CNC lathes. Experiments have revealed that during rough turning of the shafts, the magnitude of shaft deformation is 2.2-2.5 times greater compared to finish turning. It has been determined that during processing shafts on a CNC lathe, the maximum deformation is observed near the tailstock side of the machine.
APA, Harvard, Vancouver, ISO, and other styles
4

Tanabe, Hirotaka, Keiji Ogawa, Heisaburo Nakagawa, Hirohito Tsukada, and Yuki Goto. "Proposal of High-Quality Laser Hardening System for Shaft Parts Using Cylindrical Mirror and Ring-Beam Shaped by High-Speed Laser Scan System." In JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/lemp2020-8527.

Full text
Abstract:
Abstract Shaft parts are important parts used in almost all machines including automobiles. In addition, extremely high reliability is required since a shaft failure is directly linked to a fatal machine trouble. Therefore, a hardening process is usually conducted to improve strength and wear resistance. In this study, we propose a new laser heat treatment method to produce high-quality and high-accuracy shafts with high efficiency, low cost and low environmental impact. We will also develop a technique to derive the appropriate laser irradiation conditions quickly and systematically for shaft
APA, Harvard, Vancouver, ISO, and other styles
5

Jackman, L. A., G. J. Smith, A. W. Dix, and M. L. Lasonde. "Rotary Forge Processing of Direct Aged Inconel 718 for Aircraft Engine Shafts." In Superalloys. TMS, 1991. http://dx.doi.org/10.7449/1991/superalloys_1991_125_132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

DAMM, P. "Analysis of the influence of the initial surface integrity on the result of burnished high torque splined shafts." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-212.

Full text
Abstract:
Abstract. The increasing demand for low surface roughness and long service life in highly loaded components, such as extruder shafts, requires high strength, functional reliability and long-term durability. Extruder shafts are applied in plastics technology and in the food industry for processing plastic melts, mixing and compounding. Screw and kneading elements are required for this purpose. The screw and kneading elements are pushed form-fittingly onto a splined shaft. The torque is transmitted by the splined shaft. [1] Main causes of wear and damage of extruder shafts are corrosion and mech
APA, Harvard, Vancouver, ISO, and other styles
7

Manning, Keefe B., and Gerald E. Miller. "Shaft/Shaft-Seal Interaction of a Multiple Disk Centrifugal Blood Pump: A Study of Thermal and Wear Characteristics." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0197.

Full text
Abstract:
Abstract A multiple disk centrifugal pump (MDCP) is under investigation as a potential left ventricular assist device. As is the case with most shaft driven pumps, leakage problems around the shaft/shaft-seal interface are of major interest. If leakage were to occur during or after implantation, potential events such as blood loss, clotting, blood damage, and/or infections might result in adverse effects for the patient. Because these effects could be quite disastrous, potential shaft and shaft-seal materials have been investigated to determine the most appropriate course to limit these effect
APA, Harvard, Vancouver, ISO, and other styles
8

Pater, Zbigniew. "Numerical Modeling of Cross — Wedge Rolling of Hollowed Shafts." In MATERIALS PROCESSING AND DESIGN: Modeling, Simulation and Applications - NUMIFORM 2004 - Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. AIP, 2004. http://dx.doi.org/10.1063/1.1766604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Heifner, Steven C. "Applying and Specifying Metallurgical Engineering in the Production of Heavy Truck Axle Shafts." In HT 2015. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.ht2015p0398.

Full text
Abstract:
Abstract The American Trucking Associations reports that “In 2014, trucks moved 9.96 billion tons of freight, or 68.8%” of all freight tonnage transported domestically. [1]. "Spending in the U.S. logistics and transportation industry totaled $1.33 trillion in 2012, and represented 8.5% of annual gross domestic product (GDP)."[2] Truck axle shafts for decades have been made from induction hardened carbon steel with 0.4% to 0.5% carbon. Associated metallurgical engineering of steel procurements, forging, processing, and applied machining, impacts axle shaft production and performance. This paper
APA, Harvard, Vancouver, ISO, and other styles
10

Gipperich, Marius, Jan Riepe, Robin Day, and Thomas Bergs. "Express Wire Coil Cladding (EW2C) As an Advanced Technology To Accelerate Additive Manufacturing and Coating." In ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/gt2021-58709.

Full text
Abstract:
Abstract Metal shafts are indispensable components in mobility, energy and mechanical engineering. In such applications, the shafts need to withstand severe mechanical loads, friction, high temperature or corrosive media. This is why shafts are often completely made of high-performance alloys. From a technical point of view, coating an inexpensive base shaft with a thin layer of high-performance material is mostly sufficient to ensure its functionality. Adding functional parts such as shoulders or bearing seats by Additive Manufacturing (AM) instead of creating them by subtractive manufacturin
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Processing of shafts"

1

Author, Not Given. Beneficiation-hydroretort processing of US oil shales: Volume 2. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5533660.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Johnson, L. R., and R. H. Riley. Beneficiation-hydroretort processing of US oil shales, engineering study. Office of Scientific and Technical Information (OSTI), 1988. http://dx.doi.org/10.2172/5585032.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Atuhurra, Julius, Rastee Chaudhry, and Michelle Kaffenberger. Conducting Surveys of Enacted Curriculum Studies in Low- and Middle-Income Countries: A Toolkit for Policymakers, Researchers, and Education Practitioners. Research on Improving Systems of Education (RISE), 2023. http://dx.doi.org/10.35489/bsg-rise-misc_2023/13.

Full text
Abstract:
The Surveys of Enacted Curriculum (SEC) approach is used to analyse and report on the academic content embedded in education instructional components such as curriculum standards, assessments, and teachers' classroom instruction. Through a partnership between the RISE Programme and the Center for Curriculum Analysis, the approach has been used to analyse educational alignment in low- and middle-income country education systems, including in Kenya, Nepal, Nigeria, Tanzania, and Uganda. The SEC approach has many applications including content and alignment analysis for curriculum standards, asse
APA, Harvard, Vancouver, ISO, and other styles
4

Yan, Yujie, and Jerome F. Hajjar. Automated Damage Assessment and Structural Modeling of Bridges with Visual Sensing Technology. Northeastern University, 2021. http://dx.doi.org/10.17760/d20410114.

Full text
Abstract:
Recent advances in visual sensing technology have gained much attention in the field of bridge inspection and management. Coupled with advanced robotic systems, state-of-the-art visual sensors can be used to obtain accurate documentation of bridges without the need for any special equipment or traffic closure. The captured visual sensor data can be post-processed to gather meaningful information for the bridge structures and hence to support bridge inspection and management. However, state-of-the-practice data postprocessing approaches require substantial manual operations, which can be time-c
APA, Harvard, Vancouver, ISO, and other styles
5

Lunn, Pete, Marek Bohacek, Jason Somerville, Áine Ní Choisdealbha, and Féidhlim McGowan. PRICE Lab: An Investigation of Consumers’ Capabilities with Complex Products. ESRI, 2016. https://doi.org/10.26504/bkmnext306.

Full text
Abstract:
Executive Summary This report describes a series of experiments carried out by PRICE Lab, a research programme at the Economic and Social Research Institute (ESRI) jointly funded by the Central Bank of Ireland, the Commission for Energy Regulation, the Competition and Consumer Protection Commission and the Commission for Communications Regulation. The experiments were conducted with samples of Irish consumers aged 18-70 years and were designed to answer the following general research question: At what point do products become too complex for consumers to choose accurately between the good ones
APA, Harvard, Vancouver, ISO, and other styles
6

Beneficiation-hydroretort processing of US oil shales, Volume 1. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5509051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Processing of shafts' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography