Relevant bibliographies by topics / Procession of sheet metals

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Procession of sheet metals'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Procession of sheet metals.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Procession of sheet metals"

1

Opel, Simon, Thomas Schneider, and Marion Merklein. "Manufacturing of Geared Sheet Metal Components Using Flexible Rolled Tailored Blanks." Key Engineering Materials 554-557 (June 2013): 1459–70. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1459.

Full text
Abstract:
Manufacturing of functional sheet metal products with integrated gear teeth by form-ing can be realised with the application of bulk forming operations on sheet metals. Due to the desired part geometry simultaneous 2D and 3D stress and strain states occur during the forming operations. The main challenges of sheet-bulk metal form-ing are high resulting forming forces and the demand on a specific control of the material flow. In addition, there is a distinctive interaction between blank thickness and resulting part quality. To meet these challenges at high material efficiency, the application of tailored blanks with a defined sheet thickness distribution is a promising way. The process adapted semi-finished used in the presented work are formed by a flexible rolling process. First of all, the forming concept for the realization of geared sheet metal components using flexible rolled tailored blanks is presented. Afterwards, the developed rolling machine to produce rotational symmetric tailored blanks is shown, as well as the fundamental process influences during rolling. Based on that, the development of suitable process strategies to produce tailored blanks with a thickened sheet edge is presented. The further processing of those tailored blanks for the realization of external geared sheet metal components will show the advantages compared to the application of conventional sheet metals of constant sheet thickness. Therefore the concept of a combined deep drawing and ironing process is presented. The results show, that on the one hand the material efficiency is increased in comparison to the usage of conventional sheets of the same maximum thickness. On the other hand, the application of flexible rolled tailored blanks improves the accuracy of shape of the gear teeth. Both approaches prove that the application of flexible rolled is an appropriate procedure to enhance the limits of using conventional sheet metals within sheet-bulk metal forming.
APA, Harvard, Vancouver, ISO, and other styles
2

Zhou, Jian Zhong, Yong Kang Zhang, Xing Quan Zhang, Chao Jun Yang, Hui Xia Liu, and Ji Chang Yang. "The Mechanism and Experimental Study on Laser Peen Forming of Sheet Metal." Key Engineering Materials 315-316 (July 2006): 607–11. http://dx.doi.org/10.4028/www.scientific.net/kem.315-316.607.

Full text
Abstract:
Laser peen forming of sheet metal is a new plastic forming technique based on laser shock waves, which derives from the combination of laser shock processing and conventional shot peening technique, it uses high-power pulsed laser replacing the tiny balls to peen the surface of sheet metal, when the laser induced peak pressure of shock waves exceeds the dynamic yield strength of the materials, the sheet metal yields, resulting in an inhomogeneous residual stresses distribution in depth. The sheet metal responds to this residual stress by elongating at the peened surface and effectively bending the overall shape. On the basis of analyzing the mechanism of laser peen forming, the line-track-peening experiments of 45 steel sheets with 2 mm thickness were carried out; a curved sheet metal with deep layer of residual compressive stress was obtained. The preliminary experiment result shows that laser peen forming can offer desirable characteristics in shaped metals and is a valuable technique for producing components for a range of industries.
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, R., and N. Rajesh Jesudoss Hynes. "Thermal drilling processing on sheet metals: A review." International Journal of Lightweight Materials and Manufacture 2, no. 3 (September 2019): 193–205. http://dx.doi.org/10.1016/j.ijlmm.2019.08.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lal, Sohan, C. P. Paul, C. H. Premsingh, P. Bhargava, S. K. Mishra, V. K. Raghuvanshi, L. M. Kukreja, and S. K. Deb. "Parametric Dependence and Characterization of Laser Brazed Copper-Stainless Steel Joints." Advanced Materials Research 585 (November 2012): 450–54. http://dx.doi.org/10.4028/www.scientific.net/amr.585.450.

Full text
Abstract:
Joining of dissimilar metals leading to better material utilization with improved functionality encouraged the research thrust on various dissimilar material joining processes including laser brazing. This papers reports the development of laser brazing joints and their characterization for 3 mm thick Cu sheet with 3 mm thick AISI 316L stainless steel (SS) sheet in butt joint configuration using 63Ag-35.25Cu-1.75Ti active brazing foil as filler metal. Comprehensive experiments were carried out to identify the optimum processing parameters for controlled simultaneous heating of the filler metal and sh-7eets by laser beam resulting in melting of the filler metal without melting Cu and SS sheets. Using this methodology, a number of brazed joints were successfully prepared at different set of processing parameters. The brazed joints were subjected to various non-destructive (visual and dye-penetrant test) and destructive (microscopic examination, energy dispersive spectroscopy, four point bend testing etc.) characterization techniques. The results demonstrated that laser energy per unit length of 100 J/m is threshold limit for feasibility of brazing process for selected metal and thickness combination. Microscopic studies of transverse section of laser brazed joint showed full penetration across the thickness without the melting of parent metals. EDS studies showed the diffusion of filler material (Ag) more towards the Cu sheet as compared to that of SS sheet. Four point bend test showed that the alignment of laser beam-metal joint was critical for the brazing joint strength and improved joint strength was achieved when the beam was at the centre of the brazing joint. A maximum joint strength of 343.7 MPa was achieved for laser power of 550 W at scan speed of 3 mm/min.
APA, Harvard, Vancouver, ISO, and other styles
5

Xu, Fengyu, Quansheng Jiang, Lina Rong, Pengfei Zhou, and Jinlong Hu. "Structural model and dynamic analysis of six-axis Cartesian coordinate robot for sheet metal bending." International Journal of Advanced Robotic Systems 16, no. 4 (July 2019): 172988141986156. http://dx.doi.org/10.1177/1729881419861568.

Full text
Abstract:
Bending is an important procedure for processing sheet metals, while it is a key link in the realization of automatic processing of sheet metal. To improve the efficiency and accuracy of bending processing, this article proposed a structure model and a prototype of a six-axis Cartesian coordinate robot for sheet metal bending to replace workers completing automatic bending processes. Based on the analysis of overall structure schemes of the robot, kinematic simulation is conducted by using the automatic dynamic analysis of mechanical system (ADAMS). Furthermore, the dynamic performance of the structural model of the robot for sheet metal bending is analysed and design optimization is performed. A prototype of the robot based on the optimal structural model of six-axis Cartesian coordinate robot for sheet metal bending is made. Finally, under the work conditions, the efficiencies and accuracies of sheet metal bending by a worker and the robot are compared and tested. The structural model of six-axis Cartesian coordinate robot for sheet metal bending presented in this article is found to be applicable to sheet metal bending robot and improves the stability of sheet metal bending machine. The laboratory testing and experimental results verified the feasibility of the proposed robot.
APA, Harvard, Vancouver, ISO, and other styles
6

Miori, G. F., E. C. Bordinassi, S. Delijaicov, and G. F. Batalha. "The Sheet Metal Formability of AA-5083-O Sheets Processed by Friction Stir Processing." Advances in Materials Science and Engineering 2015 (2015): 1–21. http://dx.doi.org/10.1155/2015/716165.

Full text
Abstract:
The aim of this study is to determine the sheet metal formability of AA-5083-O sheets processed by the Friction Stir Processing (FSP). The FSP process was studied and a FSP tool was built. Processing quality was verified by the metallography in the processing region, which established the voids presence. Tensile tests were carried out on FSP and non-FSP specimens, and the results showed that FSP specimens have 30% greater resistance than non-FSP ones. The formability of FSP sheets was produced in MSC-MARC and Abaqus and these software products were compared by using the nonlinear FEM code. The Forming Limit Diagram was built with the results from both software products. A device to process FSP sheet metals was developed and the sheets were processed to validate the results from the software. The tools made for the bulge tests were circular and ellipse-shaped. After the bulge tests, the commercial sheets showed close approximation to those obtained from the software. The FSP sheets broke when inferior pressure was applied because of the defects in the FSP process. The results of the FSP presented the same formability of commercial sheets, however, with 30% greater strength.
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, Alan C., and Chao-Fan Chen. "Sequence Planning and Tool Selection for Bending Processes of 2.5D Sheet Metals." Advances in Mechanical Engineering 6 (January 1, 2014): 204930. http://dx.doi.org/10.1155/2014/204930.

Full text
Abstract:
Planning of an appropriate bending sequence is one of the most important aspects in the processing of sheet metals as the appropriateness of the plan affects correct selection of bending tools and feasibility of bending processes. This study aims to propose a set of principles to be followed for the planning of bending sequences and selection of bending tools for 2.5D sheet metals. To this end, we first define basic bending patterns by characterizing each pattern with a set of operation rules. The sheet metal is then decomposed into a series of bending patterns that is in turn used in the planning of bending sequences. In order to select the bending tools, we combine the contours of each bending operation, choose appropriate bending punches from the bending-tool database, and then undertake an interference check with the bending contours.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Yong Kang, Lei Zhang, De Jun Kong, Tao Ge, and Xu Dong Ren. "Study on Residual Stress of 3A21 Metal Sheet by Laser Shock in Oblique Angle." Materials Science Forum 532-533 (December 2006): 17–20. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.17.

Full text
Abstract:
3A21 metal sheet was shocked by Nd-glass laser in oblique angle under the function of pulse energy 42 J, pulse width 23 ns, pulse power 1.2×109 W, the angle between input beam and normal of sample is 30°. The center of the deformation of the sheet is 3 mm away from the geometric center. Residual stresses of crossing center side in length direction and the distribution of space in the positive and negative sides are measured by XRD, which are compressive stress 100 MPa. The diagonal length of the sheet is longer than the one of the crossing center side in length direction, the force that needs to form in the diagonal direction is bigger, so compressive stress is much bigger. The capstone of the square sheet is squeezed, the procession seriously increase, so compressive stress is the biggest one.
APA, Harvard, Vancouver, ISO, and other styles
9

Yang, Li Jun, Yang Wang, M. Djendel, and L. T. Qi. "Experimental Investigation on 3D Laser Forming of Metal Sheet." Materials Science Forum 471-472 (December 2004): 568–72. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.568.

Full text
Abstract:
In this article, the relations between the formed shapes and process parameters had been studied for 3D laser forming of sheet metals. The investigation was performed on Stainless 1Cr18Ni9Ti sheet using a Nd:YAG laser source. The scanning strategies were being investigated to potentially achieve a more uniform temporal and spatial distribution of the laser energy, possibly leading to reduced part distortion, by scanning the beam across the sheet surface with both continuous and segmented irradiation geometries. The experimental results revealed that the cross spider scanning strategy could form square and circle sheets into spherical domes. And the radial lines scanning strategy could form rectangle sheets into saddle shapes. It was also apparent from the experimental results that the height of the center of the formed sheet increased with the increasing of the laser power and scanning numbers. The height of the formed square sheet firstly decreased with the laser scanning velocity increasing and began to decrease at a certain processing parameters by cross spider strategy, in which the circle sheet was opposite with the square sheet, and in which the rectangle sheet decreased with speed increasing.
APA, Harvard, Vancouver, ISO, and other styles
10

Huang, Yan, and Philip B. Prangnell. "Deformation Processing of Sheet Metals by Continuous Frictional Angular Extrusion." Materials Science Forum 550 (July 2007): 241–46. http://dx.doi.org/10.4028/www.scientific.net/msf.550.241.

Full text
Abstract:
The feasibility of a novel continuous severe plastic deformation (SPD) technique, continuous frictional angular extrusion (CFAE), for producing ultra-fine grained strip material, has been studied. The CFAE technique takes advantage of facets of rolling and equal channel angular extrusion (ECAE) and is designed to produce bulk ultra-fine grained (UFG) metals with high productivity and low cost. A process setup was established through the modification of a standard rolling mill. CFAE processing of commercially pure aluminium AA1050 sheets was successfully carried out at room temperature, using a 120o die angle. A uniform UFG structure with an average grain size of ~0.6μm was achieved after 10 CFAE passes, at an equivalent strain of ~ 6.6. Evolution of the deformation structure and texture during processing was examined as a function of strain and characterized using high resolution EBSD.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Procession of sheet metals"

1

Hostinský, Michal. "Nekonvenční technologie výroby řetězů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232064.

Full text
Abstract:
Unconventional technologies and their continual development brings along new possibilities in the manufacturing process. The submitted project is focused on solving problems in the procession of sheet metals in the manufacture of special parts of roller and conveyor chains. In the assessment of the technology of components, laser cutting was evaluated as the most optimal technology. With this goal, there was a public tender in terms of the purchase of a new machine designed for the manufacturing operations of the company of RETEZY Vamberk. This company ranks among the most major manufacturers of conveyor, roller and special chains in Europe.
APA, Harvard, Vancouver, ISO, and other styles
2

Souza, José Carlos Sávio de [UNESP]. "Avaliação de um modelo matemático para a determinação do coeficiente de atrito no processo de conformação por dobramento." Universidade Estadual Paulista (UNESP), 2014. http://hdl.handle.net/11449/94390.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:27:10Z (GMT). No. of bitstreams: 0 Previous issue date: 2014-01-29Bitstream added on 2014-06-13T20:55:47Z : No. of bitstreams: 1 000756231.pdf: 3428054 bytes, checksum: d0cdfa43da88169d40275d58b3369674 (MD5)
O presente trabalho apresenta um modelo matemático para a análise da conformação de chapas metálicas por dobramento considerando o atrito entre a ferramenta e a peça, com o objetivo de obter uma estimativa para a carga de conformação e do valor do coeficiente de atrito no processo de conformação por dobramento . O modelo foi desenvolvido com base nas teorias plásticas pelo método da energia de conformação utilizando o critério de escoamento de von-Mises, conforme apresentado por Chakrabarty, Mellor e Al-Qureshi. Para a análise dos resultados, foram consideradas as propriedades geométricas que definem a peça e a matriz de conformação, bem como as propriedades do material. Os resultados teóricos para a tensão residual para o trabalho total de conformação, para a força de conformação e para o raio final de conformação são obtidos em função das propriedades geométricas do processo e das propriedades do material
The present work presents, a mathematical model for analysis the conformation of sheet metal folding considering the friction between the tool and workpiece to obtain an estimate for the conformation load and the value to coefficient friction. The model was developed based on the theories the energy method of the plastic deformation using the yield criterion of von Mises as presented by Chakrabarty, Mellor e Al-Qureshi. For the analyze the results, were considered the geometric properties that define the workpiece, the conformation tool and the material properties. The theoretical background for the residual strain the total work of conformation, force of conformation and the forming results, are obtained according the process, the geometrical properties and material properties
APA, Harvard, Vancouver, ISO, and other styles
3

Souza, José Carlos Sávio de. "Avaliação de um modelo matemático para a determinação do coeficiente de atrito no processo de conformação por dobramento /." Guaratinguetá, 2013. http://hdl.handle.net/11449/94390.

Full text
Abstract:
Orientador: Ângelo Caporalli Filho
Co-orientador: Anselmo Monteiro Ilkiu
Banca: Peterson Luiz Ferrandini
Banca: Miriam de Lourdes Noronha Motta Melo
Resumo : O presente trabalho apresenta um modelo matemático para a análise da conformação de chapas metálicas por dobramento considerando o atrito entre a ferramenta e a peça, com o objetivo de obter uma estimativa para a carga de conformação e do valor do coeficiente de atrito no processo de conformação por dobramento . O modelo foi desenvolvido com base nas teorias plásticas pelo método da energia de conformação utilizando o critério de escoamento de von-Mises, conforme apresentado por Chakrabarty, Mellor e Al-Qureshi. Para a análise dos resultados, foram consideradas as propriedades geométricas que definem a peça e a matriz de conformação, bem como as propriedades do material. Os resultados teóricos para a tensão residual para o trabalho total de conformação, para a força de conformação e para o raio final de conformação são obtidos em função das propriedades geométricas do processo e das propriedades do material
Abstract: The present work presents, a mathematical model for analysis the conformation of sheet metal folding considering the friction between the tool and workpiece to obtain an estimate for the conformation load and the value to coefficient friction. The model was developed based on the theories the energy method of the plastic deformation using the yield criterion of von Mises as presented by Chakrabarty, Mellor e Al-Qureshi. For the analyze the results, were considered the geometric properties that define the workpiece, the conformation tool and the material properties. The theoretical background for the residual strain the total work of conformation, force of conformation and the forming results, are obtained according the process, the geometrical properties and material properties
Mestre
APA, Harvard, Vancouver, ISO, and other styles
4

黃啓榮 and Kai-wing Wong. "A CAD/CAM system for sheet metal blanking dies." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1991. http://hub.hku.hk/bib/B31210594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Billur, Eren. "Warm Hydroforming Characteristics of Stainless Steel Sheet Metals." VCU Scholars Compass, 2008. http://scholarscompass.vcu.edu/etd/1665.

Full text
Abstract:
For numerical modeling and predictive analysis of warm hydroforming, better understanding of material properties (i.e. Flow curves) is required at elevated temperatures and high strains. Hydraulic bulge testing is a suitable method to obtain this information. However, analysis of the test data is not standardized as there are numerous approaches developed and adopted throughout the years. In this study, first, different approaches for hydraulic bulge analysis were compared with stepwise experiments to determine the best combination of approaches in obtaining accurate flow curves at different temperatures and strain rates. Then, three different grades of stainless steels (AISI 201, 301 and 304) were tested at various hydroforming conditions to determine the effect of pressure, temperature and strain rate on formability (i.e. cavity filling and thinning). These experimental findings were then used to be compared with predicted values from FEA. Results showed that material model works accurately in predicting the formability of materials in warm hydroforming.
APA, Harvard, Vancouver, ISO, and other styles
6

Chitti, Babu Surendra. "Development of tailored preform processing technology for net-shape manufacturing of large monolithic structures." Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/4861.

Full text
Abstract:
Thesis (Ph. D.)--University of Missouri-Columbia, 2007.
The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on January 31, 2008) Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
7

Choi, Yangwook. "Modeling evolution of anisotropy and hardening for sheet metals." Connect to this title online, 2003. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1064247377.

Full text
Abstract:
Thesis (Ph. D.)--Ohio State University, 2003.
Title from first page of PDF file. Document formatted into pages; contains xvii, 155 p. : ill. (some col.). Advisors: June K. Lee, Robert H. Wagoner, and Mark E. Walter, Dept. of Mechanical Engineering. Includes bibliographical references (p. 141-147).
APA, Harvard, Vancouver, ISO, and other styles
8

Dallmeier, Johannes. "Experimental analysis and numerical fatigue modeling for magnesium sheet metals." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2016. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-209124.

Full text
Abstract:
The desire for energy and resource savings brings magnesium alloys as lightweight materials with high specific strength more and more into the focus. Most structural components are subjected to cyclic loading. In the course of computer aided product development, a numerical prediction of the fatigue life under these conditions must be provided. For this reason, the mechanical properties of the considered material must be examined in detail. Wrought magnesium semifinished products, e.g. magnesium sheet metals, typically reveal strong basal textures and thus, the mechanical behavior considerably differs from that of the well-established magnesium die castings. Magnesium sheet metals reveal a distinct difference in the tensile and compressive yield stress, leading to non-symmetric sigmoidal hysteresis loops within the elasto-plastic load range. These unusual hysteresis shapes are caused by cyclic twinning and detwinning. Furthermore, wrought magnesium alloys reveal pseudoelastic behavior, leading to nonlinear unloading curves. Another interesting effect is the formation of local twin bands during compressive loading. Nevertheless, only little information can be found on the numerical fatigue analysis of wrought magnesium alloys up to now. The aim of this thesis is the investigation of the mechanical properties of wrought magnesium alloys and the development of an appropriate fatigue model. For this purpose, twin roll cast AM50 as well as AZ31B sheet metals and extruded ME21 sheet metals were used. Mechanical tests were carried out to present a comprehensive overview of the quasi-static and cyclic material behavior. The microstructure was captured on sheet metals before and after loading to evaluate the correlation between the microstructure, the texture, and the mechanical properties. Stress- and strain-controlled loading ratios and strain-controlled experiments with variable amplitudes were performed. Tests were carried out along and transverse to the manufacturing direction to consider the influence of the anisotropy. Special focus was given to sigmoidal hysteresis loops and their influence on the fatigue life. A detailed numerical description of hysteresis loops is necessary for numerical fatigue analyses. For this, a one-dimensional phenomenological model was developed for elasto-plastic strain-controlled constant and variable amplitude loading. This model consists of a three-component equation, which considers elastic, plastic, and pseudoelastic strain components. Considering different magnesium alloys, good correlation is reached between numerically and experimentally determined hysteresis loops by means of different constant and variable amplitude load-time functions. For a numerical fatigue life analysis, an energy based fatigue parameter has been developed. It is denoted by “combined strain energy density per cycle” and consists of a summation of the plastic strain energy density per cycle and the 25 % weighted tensile elastic strain energy density per cycle. The weighting represents the material specific mean stress sensitivity. Applying the energy based fatigue parameter on modeled hysteresis loops, the fatigue life is predicted adequately for constant and variable amplitude loading including mean strain and mean stress effects. The combined strain energy density per cycle achieves significantly better results in comparison to conventional fatigue models such as the Smith-Watson-Topper model. The developed phenomenological model in combination with the combined strain energy density per cycle is able to carry out numerical fatigue life analyses on magnesium sheet metals.
APA, Harvard, Vancouver, ISO, and other styles
9

Balanethiram, Venkata S. "Hyperlasticity: enhanced formability of sheet metals at high workpiece velocity." The Ohio State University, 1996. http://rave.ohiolink.edu/etdc/view?acc_num=osu1301933505.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Balanethiram, Venkata S. "Hyperplasticity : enhanced formability of sheet metals at high workpiece velocity /." The Ohio State University, 1996. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487935573771459.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Procession of sheet metals"

1

Global, Symposium on Innovations in Materials Processing and Manufacturing: Sheet Materials (2nd 2001 New Orleans Louisiana). Innovations in processing and manufacturing of sheet materials: Proceedings : the Second Global Symposium on Innovations in Materials Processing and Manufacturing: Sheet Materials : held at the 2001 TMS Annual Meeting, February 11-15, 2001, New Orleans Louisiana. Warrendale, Pennsylvania: TMS, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zandrahimi, Morteza. Strain path effects in stretching of sheet metals. Birmingham: University of Birmingham, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schultz, Theodore J. Acoustical uses for perforated metals: Principles and applications. Milwaukee, Wis. (710 N. Plankinton Ave., Milwaukee 53203): Industrial Perforators Association, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Correa, Luis Guillermo. Trabajo mecánico de los metales. Bogotá, Colombia: Banco de la República, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Davis, Trevor. Formability and strength of sheet metals subjected to complex strain paths. Birmingham: University of Aston. Department of Mechanical & Production Engineering, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Institution, British Standards. Metallic materials - sheet and strip - Erichsen cupping test =: Matériaux métalliques - tôles et bandes - essai d'emboutissage Erichsen. London: BSI, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Herrmann, Martin. Beitrag zur Berechnung von Vorgängen der Blechumformung mit der Methode der finiten Elemente. Berlin: Springer, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Richard, Hughes. The colouring, bronzing and patination of metals: A manual for the fine metalworker and sculptor, cast bronze, cast brass, copper and copper-plate, gilding metal, sheet yellow brass, silver and silver-plate. London: Crafts Council, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rowe, Michael, 1948 June 14-, ed. The colouring, bronzing, and patination of metals: A manual for the fine metalworker and sculptor : cast bronze, cast brass, copper and copper-plate, gilding metal, sheet yellow brass, silver and silver-plate. New York, N.Y: Watson-Guptill Publications, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Guk, Sergey. Der Zusammenhang zwischen Gefügeaufbau und Stoffluss in Prozessen der Blechumformung. Freiberg: Technische Universität Bergakademie Freiberg, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Procession of sheet metals"

1

Huang, Yan, and Philip B. Prangnell. "Deformation Processing of Sheet Metals by Continuous Frictional Angular Extrusion." In Materials Science Forum, 241–46. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-434-0.241.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Batygin, Yuriy, Marina Barbashova, and Oleh Sabokar. "Magnetic Pulsed Pressure for Forming Inner Angles in Sheet Metals." In Electromagnetic Metal Forming for Advanced Processing Technologies, 5–34. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74570-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Reitz, A., O. Grydin, and M. Schaper. "Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts." In The Minerals, Metals & Materials Series, 69–79. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36628-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Galanulis, K. "Optical Measuring Technologies in Sheet Metal Processing." In Sheet Metal 2005, 19–34. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-972-5.19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bailly, David, Laura Conrads, and Gerhard Hirt. "Hybrid Sheet Metal Processing Center." In 60 Excellent Inventions in Metal Forming, 143–48. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46312-3_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Banabic, Dorel. "Formability of Sheet Metals." In Sheet Metal Forming Processes, 141–211. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-88113-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hardt, David E. "Closed-Loop Control of Sheet Metal Forming Processes." In Innovations in Materials Processing, 53–69. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2411-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Banabic, Dorel, Dan-Sorin Comsa, and Jerzy Gawad. "Plastic Behaviour of Sheet Metals." In Multiscale Modelling in Sheet Metal Forming, 1–46. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-44070-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Towsey, N., G. Scheele, A. Luetzerath, and E. Schoell. "Sheet Ingot Casting Improvements at TRIMET Essen." In Light Metals 2019, 953–59. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05864-7_116.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bonnen, John J. F., Sergey F. Golovashchenko, Scott A. Dawson, Alexander V. Mamutov, and Alan J. Gillard. "Electrohydraulic Sheet Metal Forming of Aluminum Panels." In Light Metals 2012, 449–54. Cham: Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48179-1_76.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Procession of sheet metals"

1

Ding, Huafeng, Caichao Zhu, Zhong Zhou, and Dong Qian. "Ductile Failure in Processed Thin Sheet Metals." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65584.

Full text
Abstract:
Ductile fracture in thin sheet metals is a common failure mechanism that governs many important industrial applications. A variety of simulation methods, ranging from the atomistic to continuum scales, have been proposed and demonstrated. To assess the capabilities of the existing simulation tools, a group of researchers presented their modeling predictions on the so-called Sandia Fracture Challenge problem at the 2012 ASME IMECE conference. The discrepancies between the simulation and experimental results, and among the experimental results themselves led to consensus that more needs to be done to improve the understanding of this complex phenomenon. Following the participation of the Sandia Fracture challenge, further simulations are performed to study the ductile failure in thin sheet metals with conditions that are commonly used for processing. It is shown that failure pattern and load are significantly influenced by the processing conditions.
APA, Harvard, Vancouver, ISO, and other styles
2

Schuöcker, Dieter, Friedrich Kilian, Christian Zeinar, and Alexander Kratky. "Laser assisted forming of sheet metals." In ICALEO® 2001: Proceedings of the Laser Materials Processing Conference and Laser Microfabrication Conference. Laser Institute of America, 2001. http://dx.doi.org/10.2351/1.5059950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Theron, M., C. van Rooyen, and L. H. lvanchev. "CW Nd:YAG Laser welding of dissimilar sheet metals." In ICALEO® 2007: 26th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2007. http://dx.doi.org/10.2351/1.5061094.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Beske, E. U., J. Schumacher, and K. Kreutzburg. "Joining of sheet metals with poor weldability using kW Nd:YAG lasers." In ICALEO® ‘93: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1993. http://dx.doi.org/10.2351/1.5058631.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Teaca, M., M. Martiny, I. Charpentier, G. Ferron, Francisco Chinesta, Yvan Chastel, and Mohamed El Mansori. "Heterogeneous Biaxial Tensile Tests For The Characterization Of Sheet Metals Plastic Anisotropy." In INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT2010). AIP, 2011. http://dx.doi.org/10.1063/1.3552509.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jones, Joshua J., and Laine Mears. "Thermal Response Characterization of Sheet Metals During Electrically-Assisted Forming (EAF)." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7349.

Full text
Abstract:
For the current practice of lightweight engineering in the automotive sector, it is common to introduce and use low density/high strength materials instead of costly engine/drivetrain technologies. With the introduction of these materials there are commonly many manufacturing difficulties which arise during their incorporation to the vehicle. As a result, new processes which improve the manufacturability of these materials are necessary. This work examines the manufacturing technique of Electrically-Assisted Forming (EAF) where an electrical current is applied to the workpiece during deformation. As a result of the applied current, Joule heating is present which increases the temperature of the material. In this work the thermal response of sheet metal for stationary and deformation tests using this process are explored and modeled. The results of the model show good agreement for the stationary tests while the deformation model predicts that all of the applied electrical current may not be transformed into Joule heating. Thus, this work suggests from the observed response that a portion of the applied current may be directly aiding in deformation (i.e. the Electroplastic Effect).
APA, Harvard, Vancouver, ISO, and other styles
7

Jamil, M. S. C., A. J. Pinkerton, L. Li, and M. A. Sheikh. "The effect of beam geometry on diode laser forming of sheet metals." In ICALEO® 2010: 29th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2010. http://dx.doi.org/10.2351/1.5062071.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Dyi-Cheng. "Study on Rolling Processes of Porous Metals with Defects inside the Sheet." In MATERIALS PROCESSING AND DESIGN: Modeling, Simulation and Applications - NUMIFORM 2004 - Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. AIP, 2004. http://dx.doi.org/10.1063/1.1766595.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nikhare, Chetan P. "Experimental Study on Residual Formability of Single Point Incrementally Formed Part." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10619.

Full text
Abstract:
Abstract A substantial increase in demand on the sheet metal part usage in aerospace and automotive industries is due to the increase in the sale of these products to ease the transportation. However, due to the increase in fuel prices and further environmental regulation had left no choice but to manufacture more fuel efficient and inexpensive vehicles. These heavy demands force researchers to think outside the box. Many innovative research projects came to replace the conventional sheet metal forming of which single point incremental forming is one of them. SPIF is the emerging die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any processing time to undergo plastic deformation. It has several advantages over the conventional process like high process flexibility, elimination of die, complex shape and better formability. Previous literature provides enormous research on formability of metal during this process, process with various metals and hybrid metals, the influence of various process parameter, but residual formability after this process is untouched. Thus, the aim of this paper is to investigate the residual formability of the formed parts using single point incremental forming and then restrike with a conventional tool. The common process parameters of single point incremental forming were varied, and residual formability was studied through the conventional process. The strain and thickness distribution were measured and analyzed. In addition, the forming limit of the part was plotted and compared.
APA, Harvard, Vancouver, ISO, and other styles
10

Nehme, Christopher R., Amrit Sagar, William C. Messner, and Thomas P. James. "Fabrication and Investigation of a Micro-Progressive Die Set for Microforming of Sheet Metals." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-36933.

Full text
Abstract:
Progressive microforming is an attractive option for manufacturing high aspect-ratio micro-parts out of sheet metal. It is a highly economical alternative to both MEMS processing and micro-machining due to the ability to produce near-net shape parts through parallel forming processes. Current limitations in the field include precise alignment of microforming tools and an understanding of forces encountered when scaling down traditional forming processes. A five stage micro-progressive aluminum die set consisting of four shearing stages and one bending stage was fabricated by micro-machining. The die set was designed to produce right angle micro-brackets from 25 um thick annealed copper foil, with a measured average grain size of 47 um. Die clearances were set at 3 um along shearing edges and 38 um along the bending edge, corresponding to 12% and 152% material thickness, respectively. The produced micro-brackets are intended to be used as electrical connectors and consist of a nominally 280 um by 260 um tab extending vertically from a 780 um by 260 um base. In order to implement and investigate the progressive microforming process, a novel micro-press system was constructed which allows for precision alignment of the die set and workpiece. Using a prepared workpiece, forces at the first stage of the die set were measured and compared to analytical predictions based on models from the literature.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Procession of sheet metals' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography