Books on the topic 'Production system design'

Yoshimura, Masataka. System design optimization for product manufacturing. London: Springer, 2010.

Vliet, Mario van. Optimization of manufacturing system design =: Optimaliseren van het ontwerp van productiesystemen. Amsterdam: Thesis Publishers, 1991.

Finch, Byron J. Planning and control system design: Principles and cases for process manufacturers. Falls Church, Va: American Production and Inventory Control Society, 1987.

Introduction to product/service-system design. London: Springer, 2009.

Sakao, Tomohiko, and Mattias Lindahl. Introduction to product/service-system design. London: Springer, 2009.

Handbook of manufacturing and supply systems design: From strategy formulation to system operation. London: Taylor & Francis, 2002.

Kidd, Paul T. Agile manufacturing: Forging new frontiers. Wokingham, England: Addison-Wesley, 1994.

Kolarik, William J. Creating quality: Process design for results. Boston: WCB/McGraw-Hill, 1999.

Forrai, Alexandru. Embedded Control System Design: A Model Based Approach. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.

Jenny, Walter. Techniken des Prozessmanagements in der Informationssystementwicklung. Bern: P. Lang, 1995.

International Conference on Agile Manufacturing (2007 University of Durham). The Institution of Engineering and Technology International Conference on Agile Manufacturing: (ICAM 2007) : 9-11 July 2007, Collingwood College, Durham University, Durham, UK. London: Institution of Engineering and Technology, 2007.

International Conference on Agile Manufacturing (1996 Bangalore, India). Agile manufacturing: International Conference on Agile Manufacturing, Bangalore, February 22-24, 1996. Edited by Chowdiah M. P, Gargesa Gopinath, and Arun Kumar V. New Delhi: Tata-McGraw-Hill Pub. Co., 1996.

Bauer, Thomas. Thermophotovoltaics: Basic Principles and Critical Aspects of System Design. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.

Ali, Yalçin, ed. Design of industrial information systems. Amsterdam: Elsevier, 2006.

Standardization, International Organization for. Quality system - model for quality assurance in design/development,production, installation and servicing. [Geneva]: International Organization for Standardization, 1987.

Consultative Regional Workshop on Shea Product Quality and Production Certification System Design (2004 Bamako, Mali). Proceedings: Consultative Regional Workshop on Shea Product Quality and Production Certification System Design. Rome, Italy: FAO, 2006.

Yazdianpour, Hamid. Some aspects of system design for production management in the rolling-mill industry. Birmingham: Aston University. Department of Mechanical and Production Engineering, 1989.

Amann, Wolfgang. Eine Simulationsumgebung für Planung und Betrieb von Produktionssystemen. Berlin: Springer-Verlag, 1994.

Raj, Heda, ed. Fundamentals of agile project management: An overview. New York: ASME Press, 2010.

Gonçalves, Marcus. Fundamentals of agile project management: An overview. New York: ASME Press, 2010.

Gonçalves, Marcus. Fundamentals of agile project management: An overview. New York: ASME Press, 2010.

Kelly, David Brian. The design, production and evaluation of a decision support system applied to Public Library Management. [s.l: The Author], 1992.

Pia, Fanti Maria, ed. Deadlock resolution in computer-intergrated systems. Boca Raton, FL: Dekker/CRC Press, 2005.

Allen, William Joseph Johnston. A design for manufacture knowledge based system in printed board assembly production for Nortel (N.I.) Ltd.. [s.l: The Author], 1997.

Halevi, Gideon. All-Embracing Manufacturing: Roadmap System. Dordrecht: Springer Netherlands, 2012.

Spencer, Ronald Raymond. The influence of direct numerical control on the development of an integrated design production and inspection system. Birmingham: University of Birmingham, 1990.

Thurer, Matthias. Card-based control systems for a lean work design: The fundamentals of kanban, ConWIP, POLCA, and COPACABANA. Boca Raton: Taylor & Francis, 2016.

International Conference on Systems Integration (2nd 1992 Morristown, N.J.). ICSI '92: Proceedings of Second International Conference on Systems Integration, June 15-18, 1992, Headquarters Plaza Hotel, Morristown, New Jersey, U.S.A. Los Alamitos, Calif: IEEE Computer Society Press, 1992.

Mohd, Lokman Anitawati, ed. Innovations of kansei engineering. Boca Raton: CRC Press, 2011.

Gu, Da-Wei. Robust Control Design with MATLAB®. 2nd ed. London: Springer London, 2013.

Liu, Jinkun. Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012.

Production systems design. London: Butterworths, 1986.

Peel, Adrian Timothy. Design of an experimental ELF electromagnetic exposure system and its use for the study of PGE2 production by cultured human cells. Salford: University of Salford, 1996.

Chakrabarti, Amaresh. CIRP Design 2012: Sustainable Product Development. London: Springer London, 2013.

Curran, Richard. Collaborative Product and Service Life Cycle Management for a Sustainable World: Proceedings of the 15th ISPE International Conference on Concurrent Engineering (CE2008). London: Springer-Verlag London Limited, 2008.

Tolio, Tullio, ed. Design of Flexible Production Systems. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-85414-2.

Bellgran, Monica. Production development: Design and operation of production systems. London: Springer, 2010.

Kristina, Säfsten, ed. Production development: Design and operation of production systems. London: Springer, 2010.

Ding, Steven X. Model-Based Fault Diagnosis Techniques: Design Schemes, Algorithms and Tools. 2nd ed. London: Springer London, 2013.

Manufacturing systems design and analysis. London: Chapman & Hall, 1992.

Blau, Margaret E. A personnel scheduling management system for Washington State Department of Transportation construction field offices: An investigation of current practices, needs and design specifications : final report, research project Y 3399, task 35. [Olympia?, Wash.]: Washington State Dept. of Transportation, Planning, Research and Public Transportation Division, in cooperation with the U.S. Dept. of Transportation, Federal Highway Administration, 1988.

B, Goldberg Jeffrey, ed. Design and analysis of lean production systems. New York: Wiley, 2002.

1942-, Bailey James Edward, ed. Integrated production control systems: Management, analysis, design. 2nd ed. New York: Wiley, 1987.

E, Bailey James, ed. Integrated production control systems: Management, analysis, design. 2nd ed. New York: Wiley, 1987.

M. B. M. de Koster. Capacity oriented analysis and design of production systems. Berlin: Springer-Verlag, 1988.

Ardon-Finch, Jason. Evolving design and control strategies for production systems. Leicester: De Montfort University, 2000.

Daue, T. Design and production of microelectronic systems and components. [Vienna?]: United Nations Industrial Development Organization, 1986.

Bedworth, David D. Integrated production control systems: Management, analysis, design 2E. New York: Wiley, 1987.

United States. National Aeronautics and Space Administration., ed. Mars oxygen production system design. Norfolk, Va: Old Dominion University, Mechanical Engineering and Mechanics Dept., 1989.

Peacock, John. Production Control System. Routledge, 1990.