Log in

Relevant bibliographies by topics / Programmable Interface Controller (PIC) Microcontroller / Journal articles

To see the other types of publications on this topic, follow the link: Programmable Interface Controller (PIC) Microcontroller.

Journal articles on the topic 'Programmable Interface Controller (PIC) Microcontroller'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Programmable Interface Controller (PIC) Microcontroller.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Devi, Maheswaran, Vellithiruthi Thazhathu Sreedevi, and Thangavelusamy Deepa. "A non-inverting single-switch buck-boost converter based LED driver." International Journal of Power Electronics and Drive Systems 14, no. 3 (2023): 1509~1522. https://doi.org/10.11591/ijpeds.v14.i3.pp 1509-1522.

Full text

Abstract:

This paper focuses on a single-switch buck-boost (SSBB) converter for light emitting diode (LED) lighting applications. The proposed LED driver with power factor correction (PFC) shows enhanced performance in terms of input power factor, efficiency and reduced voltage stress across the switch. The presented LED driver is operated in discontinuous conduction mode (DCM). The input PFC is carried out using average current mode control (ACMC) and the controller is optimized using artificial bee colony (ABC) algorithm. A hardware prototype of 50W LED driver with ACMC for PFC is implemented using a

APA, Harvard, Vancouver, ISO, and other styles

2

Maheswaran, Devi, Sreedevi Vellithiruthi Thazhathu, and Deepa Thangavelusamy. "A non-inverting single-switch buck-boost converter based LED driver." International Journal of Power Electronics and Drive Systems (IJPEDS) 14, no. 3 (2023): 1509. http://dx.doi.org/10.11591/ijpeds.v14.i3.pp1509-1522.

Full text

Abstract:

<span lang="EN-US">This paper focuses on a single-switch buck-boost (SSBB) converter for light emitting diode (LED) lighting applications. The proposed LED driver with power factor correction (PFC) shows enhanced performance in terms of input power factor, efficiency and reduced voltage stress across the switch. The presented LED driver is operated in discontinuous conduction mode (DCM). The input PFC is carried out using average current mode control (ACMC) and the controller is optimized using artificial bee colony (ABC) algorithm. A hardware prototype of 50W LED driver with ACMC for PF

APA, Harvard, Vancouver, ISO, and other styles

3

Yu, Ji Quan, Wan Tao Qian, and Xin Gang He. "Study on an Integrated Development Environment for PAC with Complete Intellectual Property." Applied Mechanics and Materials 135-136 (October 2011): 944–49. http://dx.doi.org/10.4028/www.scientific.net/amm.135-136.944.

Full text

Abstract:

PAC(programmable automation controller) is a new trend of the industrial controller, but for now, most IDEs(integrated development environment) are still providing the PLC mode for users, which can not take full advantage of the PAC. Further more, in China, there is still not such IDE with complete intellectual properties for PACs designed by Chinese companies. For above purposes, the CHD-PACIDE was implemented which supported the ARM cortex-Mx series microcontrollers. This IDE consists of three layers, interface layer, data management layer and kernel layer, which managed functional modules r

APA, Harvard, Vancouver, ISO, and other styles

4

Ashok, Babu, and Mahesh Kumar. "Performance enhancement of brushless direct current motor under different novel optimization techniques." International Journal of Electrical and Computer Engineering (IJECE) 14, no. 6 (2024): 6225. http://dx.doi.org/10.11591/ijece.v14i6.pp6225-6236.

Full text

Abstract:

This research paper presents a novel attempt of speed control for brushless direct current (BLDC) motor in low power/servo motor applications. The performance is measured based on the swiftness for the recovery of desired speed amidst in disturbances, sensitive to supply/motor load fluctuations. The proportional integral (PI) controller is competent only for linear time invariant systems. The state of art technology is, PI controller is used with metaheuristic optimization algorithms viz. Honeybee mating optimization (HBO), artificial immune system (AIS), and frog leaping guided algorithm (FLG

APA, Harvard, Vancouver, ISO, and other styles

5

Mashhadany, Yousif I. Al, and Wesam M. Jasim. "Real time modified programmable universal machine for assembly (PUMA) 560 with intelligent controller." Indonesian Journal of Electrical Engineering and Computer Science 20, no. 3 (2020): 1194–202. https://doi.org/10.11591/ijeecs.v20.i3.pp1194-1202.

Full text

Abstract:

In this work, the design of an integrated industrial application for use on a modified PUMA 560 robot arm was presented. The modified PUMA 560 robot has three joints; two of them are free-moving and the third one is at constant 90-degree angle. It has three links and two extra Griper links. Each joint was controlled via a DC motor through a PIC microcontroller. The design and implementation of modified PUMA 560 with electronic circuits to derive the motor were used with the robot and the working platform. These electronic circuits were also used to interface with the computer to control the DC

APA, Harvard, Vancouver, ISO, and other styles

6

Sylvester, Tirones. "Design and Implementation of Smart Rural Home Water Supply System using PIC Microcontroller and Solar Energy." International Journal of Emerging Science and Engineering (IJESE) 13, no. 6 (2025): 1–9. https://doi.org/10.35940/ijese.F2601.13060525/.

Full text

Abstract:

<strong>Abstract:</strong> Water is imperative for survival, especially for living organisms and their biology. Water is essential for everyday use. Integrating solar photovoltaic systems and water supply provides a cost-effective mechanism to cater to the water scarcity problem; however, conventional water supply systems have a water pump and reservoir for water storage without a precise monitoring system. That means there is no control over the water flow from the ground level to the targeted reservoir. In this paper, we present the application of solar energy extraction that can be utilized

APA, Harvard, Vancouver, ISO, and other styles

7

Sylvester, Tirones. "Design and Implementation of Smart Rural Home Water Supply System using PIC Microcontroller and Solar Energy." International Journal of Emerging Science and Engineering (IJESE) 13, no. 6 (2025): 1–9. https://doi.org/10.35940/ijese.F2601.13060525.

Full text

Abstract:

<strong>Abstract:</strong> Water is imperative for survival, especially for living organisms and their biology. Water is essential for everyday use. The integration of solar photovoltaic systems and water supply provides a cost-effective mechanism to cater for the water scarcity problem; however, conventional water supply systems have a water pump and a reservoir for water storage without a precise monitoring system. That means, there is no control of the flow of water from the ground level to the targeted reservoir. In this paper, we present the application of the extraction of solar energy t

APA, Harvard, Vancouver, ISO, and other styles

8

Al Mashhadany, Yousif I., and Wesam M. Jasim. "Real time modified programmable universal machine for assembly (PUMA) 560 with intelligent controller." Indonesian Journal of Electrical Engineering and Computer Science 20, no. 3 (2020): 1194. http://dx.doi.org/10.11591/ijeecs.v20.i3.pp1194-1202.

Full text

Abstract:

<p>In this work, the design of an integrated industrial application for use on a<br />modified PUMA 560 robot arm was presented. The modified PUMA 560 robot<br />has three joints; two of them are free-moving and the third one is at constant 90-<br />degree angle. It has three links and two extra Griper links. Each joint was<br />controlled via a DC motor through a PIC microcontroller. The design and<br />implementation of modified PUMA 560 with electronic circuits to derive the<br />motor were used with the robot and the working platform. These electro

APA, Harvard, Vancouver, ISO, and other styles

9

Al-Omari, Ali Hussein, and Saif Al-Zubaidi. "Investigating low order harmonics of sinusoidal pulse width modulation with voltage closed loop control." Indonesian Journal of Electrical Engineering and Computer Science 26, no. 3 (2022): 1258–65. https://doi.org/10.11591/ijeecs.v26.i3.pp1258-1265.

Full text

Abstract:

This paper investigates the low order harmonics of a simplified approach to generate high quality sinusoidal pulse width modulation (SPWM) waveform produced by voltage source inverter (VSI). Programmable interface controllers (PIC) microcontroller was chosen to produce the signals in Real time with voltage feedback to control the puls width during direct current (DC) link voltage reduction. The research considered simplicity, durability, and reliability as conditions. The proposed technique was successfully passed one of the biggest challenges which is time criteria presence due to execution t

APA, Harvard, Vancouver, ISO, and other styles

10

Al-Omari, Ali Hussein, and Saif Al-Zubaidi. "Investigating low order harmonics of sinusoidal pulse width modulation with voltage closed loop control." Indonesian Journal of Electrical Engineering and Computer Science 26, no. 3 (2022): 1258. http://dx.doi.org/10.11591/ijeecs.v26.i3.pp1258-1265.

Full text

Abstract:

This paper investigates the <span>low order harmonics of a simplified approach to generate high quality sinusoidal pulse width modulation (SPWM) waveform produced by voltage source inverter (VSI). Programmable interface controllers (PIC) microcontroller was chosen to produce the signals in Real time with voltage feedback to control the puls width during direct current (DC) link voltage reduction. The research considered simplicity, durability, and reliability as conditions. The proposed technique was successfully passed one of the biggest challenges which is time criteria presence due to

APA, Harvard, Vancouver, ISO, and other styles

11

Bilal, Merabtane, and Benabadji Noureddine. "Optimized design of an extreme low power datalogger for photovoltaic panels." International Journal of Electrical and Computer Engineering (IJECE) 13, no. 3 (2023): 2734–42. https://doi.org/10.11591/ijece.v13i3.pp2734-2742.

Full text

Abstract:

The paper focuses on the design and implementation of a low cost and compact data logger prototype using an extreme low power (XLP) and low pin count programmable interface controllers (PIC) microcontroller using its own flash memory for the periodic data acquisition storage, while many other works focus in the Arduino Eco-system. It is planned to pick four important analog measures from the photovoltaic system, and store them directly as 10-bit numerical counts, this yields to faster data acquisition and storage (no time consuming for mathematical computation to convert each numerical count o

APA, Harvard, Vancouver, ISO, and other styles

12

Merabtane, Bilal, and Noureddine Benabadji. "Optimized design of an extreme low power datalogger for photovoltaic panels." International Journal of Electrical and Computer Engineering (IJECE) 13, no. 3 (2023): 2734. http://dx.doi.org/10.11591/ijece.v13i3.pp2734-2742.

Full text

Abstract:

<span lang="EN-US">The paper focuses on the design and implementation of a low cost and compact data logger prototype using an extreme low power (XLP) and low pin count programmable interface controllers (PIC) microcontroller using its own flash memory for the periodic data acquisition storage, while many other works focus in the Arduino Eco-system. It is planned to pick four important analog measures from the photovoltaic system, and store them directly as 10-bit numerical counts, this yields to faster data acquisition and storage (no time consuming for mathematical computation to conve

APA, Harvard, Vancouver, ISO, and other styles

13

Sushrut, Gandhi* Aneesha Gujral Saloni Sharma. "PIC CONTROLLED OBSTACLE AVOIDANCE ROBOT." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 10 (2016): 187–93. https://doi.org/10.5281/zenodo.159458.

Full text

Abstract:

The obstacle detection is based on IR sensors, which detect the obstacle and the microcontroller acquires the data. According to the programmable logic placed in the controller, it decides where the robot should turn. It would then give input to motor driver, which would in turn direct the motors to control the movement of the robot. Apart from that we will use a 12v battery to power the robot along with microcontroller.

APA, Harvard, Vancouver, ISO, and other styles

14

Sim, K. S., C. P. Tso, G. Y. Lim, and M. C. Foo. "Hardware Design of Bipedal Locomotion Robot." Applied Mechanics and Materials 705 (December 2014): 174–77. http://dx.doi.org/10.4028/www.scientific.net/amm.705.174.

Full text

Abstract:

This paper aims to design and develop a control system for the biped robot. The Peripheral Interface Controller (PIC) main controller board is designed to control the servo motor controller board which assures the biped robot to maintain its stability. This robot consists of PIC microcontroller, servo controller, servo motor, and sensors. The bracket parts are fabricated to mount the servo motors by constructing the biped structure. The PIC microcontroller provides interface among the sensors input, servo motor controller, and servo motor. The biped robot is able to walk in a stable motion und

APA, Harvard, Vancouver, ISO, and other styles

15

Josephine, R. L., and S. Suja. "Experimental Investigations with Fuzzy Controller for PV Fed DC Motor Incorporating SEPIC Converter as Efficient Power Interface." Applied Mechanics and Materials 550 (May 2014): 110–25. http://dx.doi.org/10.4028/www.scientific.net/amm.550.110.

Full text

Abstract:

The design and implementation of solar energy fed power electronic interface using SEPIC converter incorporating fuzzy logic controller for a DC motor has been attempted. The proposed scheme consists of a Photovoltaic (PV) array, a SEPIC DC-DC converter, a PIC microcontroller and a DC motor. The SEPIC converter has been fabricated using IGBT and associated circuit components. A PIC microcontroller has been programmed to automatically vary the duty cycle of the SEPIC converter with fuzzy logic controller depending upon the required speed of the motor. The Simulink model of the proposed scheme h

APA, Harvard, Vancouver, ISO, and other styles

16

Oubella, M’hand, Mohamed Ajaamoum, and Brahim Bouachrine. "Low cost microcontroller implementation of Takagi–Sugeno Fuzzy MPPT controller for photovoltaic systems." International journal of electrical and computer engineering systems 13, no. 10 (2022): 971–81. http://dx.doi.org/10.32985/ijeces.13.10.12.

Full text

Abstract:

Maximum power point trackers have a significant role in optimizing the energy conversion efficiency in a photovoltaic system. The numeric achievements of MPPT algorithm can be implemented and tested by using several embedded boards as Digital Signal Processor, Field-Programmable Gate Array, Arduino, and dspace. Alternatively, for the low cost, availability and simplicity, the PIC microcontrollers can be used compared with the other hardware devices. Therefore, this paper presents the implementation of a Takagi–Sugeno fuzzy controller on a low cost PIC microcontroller, for tracking the maximum

APA, Harvard, Vancouver, ISO, and other styles

17

Hu, Jia Wen, Yang Biao Xie, and Xi Qiu Fan. "Design of Programmable Ship Navigation Light Controller." Advanced Materials Research 490-495 (March 2012): 1367–71. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.1367.

Full text

Abstract:

In this paper, a new type of ship lights controller is presented, which is based on AVR microcontroller, and adopts modular design with isolation between electricity and electronics. The control panel uses LED lattice to indicate the actual layout of the lights and vary lights brightness. Electrical current detection device is used to monitor ship lights. So that the alarm rings when any of the lights is burnt out. The software is developed based on Windows environment, with graphical interface, so that it is easy to use. The proposed controller can be redeveloped to adapt to different configu

APA, Harvard, Vancouver, ISO, and other styles

18

Padgavhankar, Abhijit V., and Sharad W. Mohod. "Experimental Learning of Digital Power Controller for Photovoltaic Module Using Proteus VSM." Journal of Solar Energy 2014 (September 15, 2014): 1–8. http://dx.doi.org/10.1155/2014/736273.

Full text

Abstract:

The electric power supplied by photovoltaic module depends on light intensity and temperature. It is necessary to control the operating point to draw the maximum power of photovoltaic module. This paper presents the design and implementation of digital power converters using Proteus software. Its aim is to enhance student’s learning for virtual system modeling and to simulate in software for PIC microcontroller along with the hardware design. The buck and boost converters are designed to interface with the renewable energy source that is PV module. PIC microcontroller is used as a digital cont

APA, Harvard, Vancouver, ISO, and other styles

19

Bai, Zhen Lin, Zhi Yong Meng, and Mei Yang. "Design of Multi-Function Keyboard Display Controller Based on FPGA." Advanced Materials Research 912-914 (April 2014): 968–71. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.968.

Full text

Abstract:

The multi-function keyboard display controller can complete lots of job, which contain direct keyboard, matrix keyboard, LED digital tube dynamic scanning. The controller including button identification, automatic continuous functions and LED digital tube display , flashing and controlling the decimal point. At the same time, the external interface of the controller using the routine UART interface, established a perfect communication protocol. So that we can realize the access keys and control the display of LED digital tube. The multi-function keyboard display controller not only can overcom

APA, Harvard, Vancouver, ISO, and other styles

20

Debayan Mazumdar, Jayash Raulkar, and Prasanna Vaidya. "A Survey Paper on Refrigeration Monitoring Systems using PIC Microcontroller, PT100 Temperature Sensor and FT811 Display Driver." international journal of engineering technology and management sciences 7, no. 2 (2023): 121–26. http://dx.doi.org/10.46647/ijetms.2023.v07i02.015.

Full text

Abstract:

This is a survey paper on refrigeration monitoring systems designed using PIC microcontroller and FT811 display driver. PIC (Peripheral Interface Controllers) are a family of microcontrollers developed and produced by Microchip Technology. They are generally 8-bit or 16-bit controllers and feature a wide range of peripherals like ADCs, DACs, timers and communication interfaces. The FT811 is a graphic controller or an embedded video engine manufactured by FTDI chips. It generates images to be displayed on graphic TFT displays based on display list commands sent to it via a microcontroller throu

APA, Harvard, Vancouver, ISO, and other styles

21

Z., A. Ghani, Onn E., Y. Zeain M., et al. "Peripheral interface controller-based maximum power point tracking algorithm for photovoltaic DC to DC boost controller." TELKOMNIKA Telecommunication, Computing, Electronics and Control 18, no. 1 (2020): 240–50. https://doi.org/10.12928/TELKOMNIKA.v18i1.12730.

Full text

Abstract:

A method of developing a maximum power point tracking (MPPT) algorithm for photovoltaic (PV) utilizing a peripheral interface controller (PIC) is presented in this paper. The efficiency and adequacy of a PV depend on the temperature and the exposed position to the sun. Thus, there is an optimum point at which the operating power is at maximum. The goal is to operate the PV module at this point (MPP). It can be accomplished by using the MPPT algorithm designed with a DC-DC boost converter. The boost converter, MPPT circuit, PIC18F4550 microcontroller and PV panel are the main components used in

APA, Harvard, Vancouver, ISO, and other styles

22

Bhange, Priti, Dolly Gulhane, Payal Chavhan, et al. "Implementation of Solar Powered Autonomous Fire Fighting Robot." Journal of Optical Communication Electronics 9, no. 1 (2023): 29–36. http://dx.doi.org/10.46610/jooce.2023.v09i01.005.

Full text

Abstract:

The creation of a remote-controlled fire robot is the primary objective of this project. The water tank and wireless pump on this robot both spray water. A Peripheral Interface Controller (PIC) microcontroller performs the functionality offered. The transmitter button sends instructions to the receiver, telling it to move the robot in front, back, left, and right. To run the DC motor through the motor controller Integrated Circuit (IC) for the necessary duty, the decoder decodes the data before sending it to another microcontroller. The remote control has a decent range of up to 100 metres wit

APA, Harvard, Vancouver, ISO, and other styles

23

Razeen ,, ]Raeza. "Create a Visually programmable PLC controller using WIFI Automation I/O Profile." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 01 (2025): 1–9. https://doi.org/10.55041/ijsrem40690.

Full text

Abstract:

The emergence of Internet of Things (IoT) technologies has fundamentally transformed factory automation by enabling precise, efficient, and scalable monitoring and control of industrial systems. This project focuses on the design and development of a visually programmable Logic Controller (PLC) using a Wi-Fi-based automation I/O profile, demonstrating a significant leap in enhancing the operational efficiency and adaptability of industrial processes. By leveraging an ESP32 microcontroller—a versatile and robust platform that supports wireless communication and real-time processing—this system

APA, Harvard, Vancouver, ISO, and other styles

24

Khan, Bilal Ahmed, and Nai Shyan Lai. "An Advanced Fuzzy Logic Based Traffic Controller." International Journal of Innovation in the Digital Economy 5, no. 1 (2014): 31–40. http://dx.doi.org/10.4018/ijide.2014010103.

Full text

Abstract:

Traffic light plays an important role in the urban traffic management. Therefore, it is necessary to improve the traffic controller for effective traffic management and better traffic flow leading to greener environment. In this paper, an advanced and intelligent traffic light controller is proposed, utilising the fuzzy logic technology and image processing technique. A fuzzy logic control has been implemented to provide the attribute of intelligence to the system. For real-time image acquisition, the process is further linked to the fuzzy logic controller which generates a unique output for e

APA, Harvard, Vancouver, ISO, and other styles

25

P., Suneel* Dr.V.Usha Reddy. "MONITORING AND CONTROLLING OF ELECTRICAL LOADS FROM THE SUBSTATION BY USING ZIGBEE TECHNOLOGY." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 3 (2017): 1–9. https://doi.org/10.5281/zenodo.345642.

Full text

Abstract:

This paper proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit, called as transmitter unit, and another one is the Main station called as controlling and receiving unit. The transmitter unit is where the power is monitored continuously by PIC (Peripheral Interface Controller) microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit in the main station receives the transmitted signals by means of zigbee receiver and

APA, Harvard, Vancouver, ISO, and other styles

26

Rodríguez-Reséndiz, Juvenal, Fortino Mendoza-Mondragón, Roberto A. Gómez-Loenzo, M. Agustín Martínez-Hernández, and Victor H. Mucino. "An Approach to Motion Control Applications Based on Advanced Programmable Devices." International Journal of Electrical Engineering & Education 49, no. 3 (2012): 243–59. http://dx.doi.org/10.7227/ijeee.49.3.5.

Full text

Abstract:

In this article a methodology for constructing a simple servo loop for motion control applications which is suitable for educational applications is presented. The entire hardware implementation is demonstrated, focusing on a microcontroller-based (μC) servo amplifier and a field programmable gate array-digital signal processor (FPGA-DSP) motion controller. A novel hybrid architecture-based digital stage is featured providing a low-cost servo drive and a high performance controller, which can be used as a basis for an industrial application. Communication between the computer and the controlle

APA, Harvard, Vancouver, ISO, and other styles

27

Baskys, A. "The Course of Microcontrollers Oriented to Practical Skills." Solid State Phenomena 165 (June 2010): 410–13. http://dx.doi.org/10.4028/www.scientific.net/ssp.165.410.

Full text

Abstract:

The course of microcontrollers oriented to practical skills that is lectured at the Electronics Faculty of Vilnius Gediminas Technical University is presented and discussed in this paper. This course is dedicated to the students of the Basic studies. The laboratory works and the course project, which are of high importance in obtaining the capability to develop microcontroller-based control systems, play a key role in this course. The Mid-range architecture family of PIC (Peripheral Interface Controller) microcontrollers developed and produced by the Microchip company was chosen as the basis f

APA, Harvard, Vancouver, ISO, and other styles

28

Puyda, V. "Local web-server of telemetric system with modbus interaction sensors." Computer systems and network 3, no. 1 (2021): 99–105. http://dx.doi.org/10.23939/csn2021.01.099.

Full text

Abstract:

With the development of microprocessor components and, accordingly, a significant expansion of the use of computer technologies, remote measurement techniques are being developed. These include telemetry and remote control of technical systems or their components in industry, research, home appliances and other fields. In this paper, the author suggests how to build a local web-server based on a microcontroller with an ARM Cortex-M4 core, which can be interacted with via an http-browser with Internet access. The block diagram of the local web-server on the basis of the STM32F407 microcontrolle

APA, Harvard, Vancouver, ISO, and other styles

29

Hussien, Anas Ali, and Ali Hameed Tawfeeq. "ZigBee-Based Wireless Sensor Network for Temperature Monitoring." INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY 10, no. 10 (2013): 2062–70. http://dx.doi.org/10.24297/ijct.v10i10.1201.

Full text

Abstract:

The proposed system in this paper describes the design and implementation of a Wireless Sensor Network (WSN) based on ZigBee technology to monitor the history and current temperature information of remote locations. The system is an electronic embedded system that contains: Base Station with coordinator ZigBee, End nodes with router ZigBee, and host computer as a data base (DB) server. The base station is responsible for data collecting, a display for end node sensor readings, and TCP/IP communication with the host computer. End nodes are directly connected with sensors and transmitting the re

APA, Harvard, Vancouver, ISO, and other styles

30

Hitaka, Yasunobu, Yoshito Tanaka, Yutaka Tanaka, Junko Ishii, and Yin Yaobao. "Development of Pneumatic Parallel Force Feedback." International Journal of Automation Technology 4, no. 4 (2010): 380–87. http://dx.doi.org/10.20965/ijat.2010.p0380.

Full text

Abstract:

The increasing number of paralyzed persons and a shortage of the physical therapist is becoming an increasing problem, focusing attention on rehabilitation support. Noting the increase in wrist paralysis, we are developing corresponding rehabilitation support. Our basic approach centers on force feedback system based on the parallel 6-degree-of-freedom (DOF) Stewart platform. This parallel mechanism consists of six pneumatic cylinders whose thrust is controlled by pulse width modulation (PWM). Each cylinder has two solenoid valves for pushing and pulling controlled by PWM signals from a progra

APA, Harvard, Vancouver, ISO, and other styles

31

Nouby, M. "Analysis and Realization of CAN Bus Technology in Industrial Conveyors." International Journal on Recent and Innovation Trends in Computing and Communication 8, no. 5 (2020): 20–24. http://dx.doi.org/10.17762/ijritcc.v8i5.5424.

Full text

Abstract:

Automation industry has undergone a drastic development in recent years. In this busy world human intervention in very high critical industrial processes are compensated by the enormous growth of the automation industries. Due to the advancement there is no need for a person to continuously monitor the system instead by implementing automation through latest technologies, a very high efficient operation of the system is possible. Conveyor system plays an important role in automation for material handlin g and packaging. For the movement of the material, that is transportation, in any processin

APA, Harvard, Vancouver, ISO, and other styles

32

Burhan, I., A. A. Azman, and R. Othman. "Electro pneumatic trainer embedded with programmable integrated circuit (PIC) microcontroller and graphical user interface platform for aviation industries training purposes." IOP Conference Series: Materials Science and Engineering 152 (October 2016): 012065. http://dx.doi.org/10.1088/1757-899x/152/1/012065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Kurniawan, Erry Dwi, Alwin Adam, Muhammad Ichlasul Salik, and Paulus Lobo Gareso. "Programmable Syringe Pump for Selective Micro Droplet Deposition." Jurnal Elektronika dan Telekomunikasi 19, no. 2 (2019): 75. http://dx.doi.org/10.14203/jet.v19.75-82.

Full text

Abstract:

Micro/nanopatterns with micro deposition techniques have been used in various applications such as flexible electronic devices, biosensing, and biological tissue engineering. For depositing a small size of droplets that can be controlled, structured and patterned precisely is a very important process for microfabrication. In this study, we developed a low cost and simple system for fabricating micro/nanostructure by a selective micro deposition process using a syringe pump. This method is an additive fabrication method where selective droplet materials are released through a needle of the syri

APA, Harvard, Vancouver, ISO, and other styles

34

Cho, Kwonneung, Jeongeun Kim, Do Young Choi, Young Hyun Yoon, Jung Hwan Oh, and Seung Eun Lee. "An FPGA-Based ECU for Remote Reconfiguration in Automotive Systems." Micromachines 12, no. 11 (2021): 1309. http://dx.doi.org/10.3390/mi12111309.

Full text

Abstract:

Growing interest in intelligent vehicles is leading automotive systems to include numerous electronic control units (ECUs) inside. As a result, efficient implementation and management of automotive systems is gaining importance. Flexible updating and reconfiguration of ECUs is one appropriate strategy for these goals. Software updates to the ECUs are expected to improve performance and bug handling, but there are limitations due to the fixed hardware circuit. By applying hardware-reconfigurable ECUs to the automotive system, patches that are not able to be handled with only software updates ar

APA, Harvard, Vancouver, ISO, and other styles

35

K., Sangeetha, Arun K., and Goutham K.K. "Voice Controlled Wheelchair for Physically Disabled People." International Journal of Science and Healthcare Research 5, no. 2 (2020): 254–57. https://doi.org/10.5281/zenodo.3931550.

Full text

Abstract:

Most of the disabled people usually depend on others in their daily life especially in moving from one place to another. For the wheelchair users, continuously they need someone to help them in getting the wheelchair moving. By using a wheelchair control system they become more independent. The moto of this research project is to design and fabricate a voice controlled wheelchair for physically disabled people. The wheelchair control system which deploys a voice recognition system for triggering and controlling all its movements. It integrates a microcontroller, voice recognition through googl

APA, Harvard, Vancouver, ISO, and other styles

36

Kolinko, Sergey V., Ivan S. Kolinko, Hlib E. Polozhii, and Aleksandr G. Ponomarev. "Beam Scanning Controller for Proton-Beam Writing." 3, no. 3 (September 28, 2021): 134–40. http://dx.doi.org/10.26565/2312-4334-2021-3-20.

Full text

Abstract:

A scanning control system of the ion beam of MeV energies has been developed for the nuclear scanning microprobe and proton-beam writing channel as a part of accelerator-analytical complex based on the Sokol electrostatic accelerator of the Institute of Applied Physics of the National Academy of Sciences of Ukraine. The system was put into operation to replace the obsolete one based on microcontrollers. The scanning control system is based on a National Instruments reconfigurable module with a Field Programmable Gate Array. The module operates in real time and is connected to a personal comput

APA, Harvard, Vancouver, ISO, and other styles

37

S., Kanagamalliga, S. Vasuki Dr., Vishnu Priya A., and Viji V. "A ZIGBEE AND EMBEDDED BASED SECURITY MONITORING AND CONTROL SYSTEM." International Journal of Information Sciences and Techniques (IJIST) 4, no. 3 (2014): 173–78. https://doi.org/10.5281/zenodo.7192438.

Full text

Abstract:

As technology becomes more advanced and modernized; more features are added to the existing system for the purpose of satisfying the increasing security needs of the people. Deploying wireless technologies for security and control in home offers attractive benefits along with user friendly interface. In this paper we present a smart security system comprises of Zigbee, GSM, Sensors and Smartphone for Security monitoring and control, when the user is at remote premises. Three sensors namely PIR, vibration and door sensor are installed at windows and doors. Whenever there is a security breach th

APA, Harvard, Vancouver, ISO, and other styles

38

Ganbar Orujov, Jeyran Agamaliyeva, Ganbar Orujov, Jeyran Agamaliyeva. "ANALYSIS OF MODERN MICROCONTROLLERS APPLIED IN INDUSTRY." PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions 35, no. 12 (2023): 346–56. http://dx.doi.org/10.36962/pahtei35122023-346.

Full text

Abstract:

This article analyzes the fundamental role and importance of modern microcontrollers in the industrial sector. Modern microcontrollers provide significant and additional functional capabilities in industrial applications. The broad functional scope of these microcontrollers caters to the requirements of evolving technologies in independent projects and industrial processes. As technology advances, modern microcontrollers are adapted for larger and more demanding functional requirements. The significance of modern microcontrollers is increasing in manufacturing processes and automation systems.

APA, Harvard, Vancouver, ISO, and other styles

39

Gabbar, Hossam A., Yasser Elsayed, Manir Isham, Abdalrahman Elshora, Abu Bakar Siddique, and Otavio Lopes Alves Esteves. "Demonstration of Resilient Microgrid with Real-Time Co-Simulation and Programmable Loads." Technologies 10, no. 4 (2022): 83. http://dx.doi.org/10.3390/technologies10040083.

Full text

Abstract:

In recent years, the foment for sustainable and reliable micro energy grid (MEG) systems has increased significantly, aiming mainly to reduce the dependency on fossil fuels, provide low-cost clean energy, lighten the burden, and increase the stability and reliability of the regional electrical grid by having interconnected and centralized clean energy sources, and ensure energy resilience for the population. A resilient energy system typically consists of a system able to control the energy flow effectively by backing up the intermittent output of renewable sources, reducing the effects of the

APA, Harvard, Vancouver, ISO, and other styles

40

Kazi Wohiduzzaman, Rahmot Ullah, and Ashit Sharkar. "Design and Development of a Low Cost Smart Electronic School Bell." International Journal of Latest Technology in Engineering Management & Applied Science 13, no. 9 (2024): 131–35. http://dx.doi.org/10.51583/ijltemas.2024.130913.

Full text

Abstract:

A considerable advancement of automation over the decades shows automation is very much essential in every sectors especially where time is a major factor. Hence there is a huge demand for automated notification or bell system which has high degree of accuracy and low cost. The main purpose of this project is to develop a smart bell system which can be used all kinds of educational institutions. Smart school bell implement a smart way to manage class periods and breaks without use of manually operated manpower. There is a controller machine, where each class can be set up as desired and from t

APA, Harvard, Vancouver, ISO, and other styles

41

Kazi Wohiduzzaman, Rahmot Ullah, and Ashit Sharkar. "Design and Development of a Low Cost Smart Electronic School Bell." International Journal of Latest Technology in Engineering Management & Applied Science 13, no. 10 (2024): 7–11. http://dx.doi.org/10.51583/ijltemas.2024.131002.

Full text

Abstract:

Abstract: A considerable advancement of automation over the decades shows automation is very much essential in every sectors especially where time is a major factor. Hence there is a huge demand for automated notification or bell system which has high degree of accuracy and low cost. The main purpose of this project is to develop a smart bell system which can be used all kinds of educational institutions. Smart school bell implement a smart way to manage class periods and breaks without use of manually operated manpower. There is a controller machine, where each class can be set up as desired

APA, Harvard, Vancouver, ISO, and other styles

42

Alfitri, Tafki Aunika Fariz, and Iman Setiono. "RANCANG BANGUN ALAT PENGATURAN ARAH PUTAR MOTOR DC POWER WINDOWS BERBASIS PLC PANASONIC MENGGUNAKAN HUMAN MACHINE INTERFACE (HMI)." Gema Teknologi 19, no. 2 (2017): 10. http://dx.doi.org/10.14710/gt.v19i2.21864.

Full text

Abstract:

Tafki Aunika Fariz Alfitri, Iman Setiono, in this paper explain that at this time human life has become more advanced especially in the field of science and technology, all people compete to create technology that is useful and easy for humans. At present the equipment in general has used a remote monitoring and operation system. This system usually uses a microcontroller or PLC as a control. In an effort to facilitate human work, in this case I tried to make a design setting the direction of rotation of the DC power windows. This DC power windows motor is usually used in the car to move the w

APA, Harvard, Vancouver, ISO, and other styles

43

Sahoo, Nilima, Hung-Wei Lin, and Yeong-Hwa Chang. "Design and Implementation of a Walking Stick Aid for Visually Challenged People." Sensors 19, no. 1 (2019): 130. http://dx.doi.org/10.3390/s19010130.

Full text

Abstract:

Visually challenged people (VCPs) face many difficulties in their routine life. Usually, in many cases, they need to depend upon others, which makes them unconfident in an unfamiliar environment. Thus, in this paper, we present an aid that helps in detecting obstacles and water puddles in their way. This system comprises a walking stick and Android-based applications (APPs). The walking stick is embedded with Raspberry Pi and programmable interface controller (PIC) as a control kernel, sensors, a global position system (GPS) module, and alert-providing components. Sensors help to detect obstac

APA, Harvard, Vancouver, ISO, and other styles

44

P., Veerakumar. "Energy Monitoring System to Display on Web Page Using ESP8266." Indonesian Journal of Electrical Engineering and Computer Science 9, no. 2 (2018): 286–88. https://doi.org/10.11591/ijeecs.v9.i2.pp286-288.

Full text

Abstract:

The Concepts of the Internet of Things associated with different applications running from home motorisation to habitual IoT, Where partner physical things, from wherever through a system. This will give incite access to information about the physical world and the articles in it provoking imaginative organisations and augmentation in capability and productivity. The framework proposes to build up an IoT based Interactive Industrial Home remote framework, Energy administration framework and inserted information obtaining frame to show on site page utilising GPRS, SMS and E-mail caution. Give t

APA, Harvard, Vancouver, ISO, and other styles

45

Tokmak, Süleyman, Mohammad Ruhul Amin Bhuiyan, and Hayati Mamur. "DESIGN AND DEVELOPMENT OF A PROGRAMMABLE LOGIC CONTROLLER BASED DATA ACQUISITION SYSTEM TO INCREASE EFFICIENCY IN GALVANOTECHNICAL PLATING BATHS." Mühendislik Bilimleri ve Tasarım Dergisi 13, no. 1 (2025): 120–32. https://doi.org/10.21923/jesd.1450955.

Full text

Abstract:

In industry, plating processes are used to improve the appearance of the material, to protect it against corrosion and to increase its durability. Different current pass through the brushes of the electrodes connected to the bars of the plating baths used in galvanotechnical plating, depending on the structure of the solution and other factors. This causes different amounts of wear on the brushes. As a result, the amount of current passing through the brushes changes and the quality of the plating decreases. In this study, a data acquisition system based on a programmable logic controller (PLC

APA, Harvard, Vancouver, ISO, and other styles

46

Vaishnavi Patil, Dr. Pavithra G., Dr. T. C. Manjunath. "Design, Development of a Diversified Implemention of a Supervisory Control And Data Acquisition based VLSI System (SCADA) framework Utilizing Microcontroller based Programmable Logic Controllers." Tuijin Jishu/Journal of Propulsion Technology 44, no. 3 (2023): 879–90. http://dx.doi.org/10.52783/tjjpt.v44.i3.389.

Full text

Abstract:

In this paper, the designing & implementing of a supervisory control and data acquisition system (SCADA) framework utilizing microcontroller based programmable logic controllers is presented in brief with some of the simulated results. This article shows the automation of a process by interfacing a weighing balance with Supervisory Control And Data Acquisition System (SCADA) through a Programmable Logic Controller (PLC). The research work was taken up as a part of the consultation work at a cigarette manufacturing firm. The detailed study of the entire cigarette manufacturing process revea

APA, Harvard, Vancouver, ISO, and other styles

47

Ihrens, Jana, Stefan Möws, Lennard Wilkening, Thorsten A. Kern, and Christian Becker. "The Impact of Time Delays for Power Hardware-in-the-Loop Investigations." Energies 14, no. 11 (2021): 3154. http://dx.doi.org/10.3390/en14113154.

Full text

Abstract:

Power hardware-in-the-loop (PHiL) simulations provide a powerful environment in the critical process of testing new components and controllers. In this work, we aim to explain the impact of time delays in a PHiL setup and recommend how to consider them in different investigations. The general concept of PHiL, with its necessary components, is explained and the benefits compared to pure simulation and implemented field tests are presented. An example for a flexible PHiL environment is shown in form of the Power Hardware-in-the-Loop Simulation Laboratory (PHiLsLab) at TU Hamburg. In the PHiLsLab

APA, Harvard, Vancouver, ISO, and other styles

48

Nguyen, Van-Khanh, Bao-Toan Thai, Vy-Khang Tran, Hai Pham, and Chi-Ngon Nguyen. "Real-time anomaly detection in electric motor operation noise." IAES International Journal of Artificial Intelligence (IJ-AI) 13, no. 4 (2024): 3814. http://dx.doi.org/10.11591/ijai.v13.i4.pp3814-3826.

Full text

Abstract:

Anomaly detection plays a very important role in many fields to identify abnormalities occurring in the system earlier. This study proposes a new abnormality detection solution for 3-phase electric motors based on their working noise. Normal and abnormal operating noise data sets for an electric motor were acquired in the laboratory. These datasets are converted into the corresponding two-dimensional gray spectrogram image sets. The normal set is used to train the autoencoder (AE) model to find the abnormality evaluation threshold. This threshold is validated again with anomalous data sets. Th

APA, Harvard, Vancouver, ISO, and other styles

49

Van-Khanh, Nguyen, Thai Bao-Toan, Tran Vy-Khang, Pham Hai, and Nguyen Chi-Ngon. "Real-time anomaly detection in electric motor operation noise." IAES International Journal of Artificial Intelligence (IJ-AI) 13, no. 4 (2024): 3814–26. https://doi.org/10.11591/ijai.v13.i4.pp3814-3826.

Full text

Abstract:

Anomaly detection plays a very important role in many fields to identify abnormalities occurring in the system earlier. This study proposes a new abnormality detection solution for 3-phase electric motors based on their working noise. Normal and abnormal operating noise data sets for an electric motor were acquired in the laboratory. These datasets are converted into the corresponding two-dimensional gray spectrogram image sets. The normal set is used to train the autoencoder (AE) model to find the abnormality evaluation threshold. This threshold is validated again with anomalous data sets. Th

APA, Harvard, Vancouver, ISO, and other styles

50

Hurski, N. N., Yu A. Skudnyakov, V. S. Artsiushchyk, and A. N. Bezruchko. "Control of Mechatronic System Based on Multilink Robot-Manipulators." Science & Technique 18, no. 4 (2019): 350–54. http://dx.doi.org/10.21122/2227-1031-2019-18-4-350-354.

Full text

Abstract:

The task of controlling multi-link robots with manipulators for implementation of high-tech processes in industry has been considered in the paper. The paper presents sequential steps of using computer technology in construction of robotic-manipulators, including mathematical, algorithmic, and hardware and software tools for creating a multi-drive mechatronic system controlled by OMRON industrial microcontroller. A kinematic scheme of a robot manipulator has been described in the paper and it performs the following two types of movements – rotation around the z axis and rectilinear movement of

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!