Log in

Relevant bibliographies by topics / Programming cycles

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Programming cycles'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Programming cycles.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Programming cycles"

1

Steele, Guy L. "Programming language life cycles." ACM SIGAda Ada Letters 32, no. 3 (2012): 95–96. http://dx.doi.org/10.1145/2402709.2402705.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Guivarc’h-Leveque, Anne. "Estradiol programming of antagonist IVF cycles." Reproductive BioMedicine Online 25, no. 3 (2012): 331–32. http://dx.doi.org/10.1016/j.rbmo.2012.06.009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dey, Tamal K., Anil N. Hirani, and Bala Krishnamoorthy. "Optimal Homologous Cycles, Total Unimodularity, and Linear Programming." SIAM Journal on Computing 40, no. 4 (2011): 1026–44. http://dx.doi.org/10.1137/100800245.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Malviya, Vikas K., and Prashant K. Jain. "Computations for Simplification of Canned Cycles in CNC Programming for Turning Operations." Advanced Materials Research 383-390 (November 2011): 965–71. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.965.

Full text

Abstract:

Canned cycles are predefined machine instructions stored permanently in the machine controller. These are used while writing part program to perform machining operations that are of repetitive nature. Whenever G & M code for these canned cycles appeared in part program, the controller of the machine calls already stored instructions and executes. However all CNC machines may not have facility to run part programs with canned cycles due to lack of computational facilities. The developed utility in this program allows part programmers to write part program using canned cycles and later on co

APA, Harvard, Vancouver, ISO, and other styles

5

Zhao, Dongpeng, Shuai Deng, Ruikai Zhao, Li Zhao, Weicong Xu, and Xiting Long. "The flexible programming of thermodynamic cycles: Application of supercritical carbon dioxide Brayton cycles." Energy Conversion and Management 245 (October 2021): 114624. http://dx.doi.org/10.1016/j.enconman.2021.114624.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shmidt, Irina V., and Aleksandr A. Dyakonov. "Forming Effective Cycle of Round Grinding with Radial Feed." Key Engineering Materials 685 (February 2016): 360–64. http://dx.doi.org/10.4028/www.scientific.net/kem.685.360.

Full text

Abstract:

This work describes methods of designing grinding cycles and controlling them. We demonstrate that using modern equipment allows programming stepless feed change during whole finishing cycle, giving opportunity to organize more complex high productive cycles of abrasive treatment. Taking this fact into account we suggest algorithm of situation feed correction for forming effective cycle of round grinding with radial feed, allowing maintaining process productiveness and preventing thermal defects.

APA, Harvard, Vancouver, ISO, and other styles

7

Marques, Mário C. "Training programming: revisiting terminology." Motricidade 13, no. 2 (2017): 1. http://dx.doi.org/10.6063/motricidade.13445.

Full text

Abstract:

Does the way the literature presents the classic periodization or programming make sense? In our opinion, the answer is clearly no. To get started, periodization and programming are terms used interchangeably (as synonyms) in scientific literature when they actually have different meanings. Thus, to periodize is to set periods for a process (e.g., to a season or the sports life), whereas programming is defined as to devise and order the necessary actions to carry out a project. Accordingly, coaches and physical conditioning professionals should divide or periodize the season in different cycle

APA, Harvard, Vancouver, ISO, and other styles

8

Edgar, B. A., D. A. Lehman, and P. H. O'Farrell. "Transcriptional regulation of string (cdc25): a link between developmental programming and the cell cycle." Development 120, no. 11 (1994): 3131–43. http://dx.doi.org/10.1242/dev.120.11.3131.

Full text

Abstract:

During postblastoderm embryogenesis in Drosophila, cell cycles progress in an invariant spatiotemporal pattern. Most of these cycles are differentially timed by bursts of transcription of string (cdc25), a gene encoding a phosphatase that triggers mitosis by activating the Cdc2 kinase. An analysis of string expression in 36 pattern-formation mutants shows that known patterning genes act locally to influence string transcription. Embryonic expression of string gene fragments shows that the complete pattern of string transcription requires extensive cis-acting regulatory sequences (&gt; 15.3

APA, Harvard, Vancouver, ISO, and other styles

9

Manikkam, Mohan, Teresa L. Steckler, Kathleen B. Welch, E. Keith Inskeep, and Vasantha Padmanabhan. "Fetal Programming: Prenatal Testosterone Treatment Leads to Follicular Persistence/Luteal Defects; Partial Restoration of Ovarian Function by Cyclic Progesterone Treatment." Endocrinology 147, no. 4 (2006): 1997–2007. http://dx.doi.org/10.1210/en.2005-1338.

Full text

Abstract:

Prenatal testosterone (T) excess during midgestation leads to estrous cycle defects and polycystic ovaries in sheep. We hypothesized that follicular persistence causes polycystic ovaries and that cyclic progesterone (P) treatment would overcome follicular persistence and restore cyclicity. Twice-weekly blood samples for P measurements were taken from control (C; n = 16) and prenatally T-treated (T60; n = 14; 100 mg T, im, twice weekly from d 30–90 of gestation) Suffolk sheep starting before the onset of puberty and continuing through the second breeding season. A subset of C and T60 sheep were

APA, Harvard, Vancouver, ISO, and other styles

10

Schmidt, C., A. M. S. Chowdhury, K. Neuking, and G. Eggeler. "Mechanical Behavior of Shape Memory Polymers by 1WE Method: Application to Tecoflex®." Journal of Thermoplastic Composite Materials 24, no. 6 (2011): 853–60. http://dx.doi.org/10.1177/0892705711407785.

Full text

Abstract:

Thermomechanical cycles including programming, cooling, unloading, and heating to trigger the 1WE were examined for a shape memory polymer, Tecoflex® (TFX EG − 72D). Cycles were performed at 60°C with 300% strain and a recovery time of 10 min. Strains evolving with time were estimated during the thermomechanical treatments for the total 50 cycles using 300% strain. Recovery ratios for the 300% strain were also estimated. It turns out that programming, cooling, unloading and heating to trigger the 1WE causes an increase of irreversible strain and is associated with a corresponding decrease of t

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Programming cycles"

1

Mohyla, Petr. "Využití parametrického programování pro obrábění obecných ploch." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-316997.

Full text

Abstract:

This diploma thesis is focused on parametric programming and creation of user cycles in CNC machine tools in control system Sinumerik 840 D sl / 828 D. The first part contains a theoretical introduction to programming and creation of graphical support of the cycle. In the second part there are practical examples with descriptions and explanations that can act as a guide for creation of parametrical programs. These samples are experimentally verified at the end of the work.

APA, Harvard, Vancouver, ISO, and other styles

2

Berkani, Mohamed Said. "Conception par optimisation des machines électriques de traction ferroviaire sur cycles de fonctionnement ferroviaire." Thesis, Besançon, 2016. http://www.theses.fr/2016BESA2024.

Full text

Abstract:

Le moteur de traction ferroviaire est destiné à fonctionner dans de larges gammes de couple/vitesse. L'objectif principal de cette thèse est de développer des méthodes de conception par optimisation de machines électriques pour la traction ferroviaire avec la prise en compte des cycles (missions). Puis, d'incorporer ces méthodes dans un outil informatique. Après une prise en main des modèles électromagnétiques existants et leur transfert dans le langage Matlab, des modèles thermiques transitoires ont été établis et validés par rapport aux mesures expérimentales. À partir de là, la problématiqu

APA, Harvard, Vancouver, ISO, and other styles

3

Skácel, Jan. "Využití parametrického programování pro obrábění obecných ploch." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232184.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hanuška, Rostislav. "Možnosti systému Sinumerik Operate 4.7 při programování CNC frézovacích center." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378860.

Full text

Abstract:

This diploma thesis is focused on advanced NC programming using macros and user cycles. The first part deals with theory of programming and machining of thin-walled parts. The second part contains practical examples of creating cycles, including their graphical support, for individual thin-wall milling strategies. Everything is explained in detail and work can serve as a guide for programmers or wider professional public.

APA, Harvard, Vancouver, ISO, and other styles

5

Patiño, Diego. "Pilotage des cycles limites dans les systèmes dynamiques hybrides : application aux alimentations électriques statiques." Electronic Thesis or Diss., Vandoeuvre-les-Nancy, INPL, 2009. http://www.theses.fr/2009INPL013N.

Full text

Abstract:

Cette thèse s'intéresse au pilotage des cycles limites pour une classe particulière de systèmes hybrides (SDH): les systèmes commutés cycliques. La thématique des SDH est née du constat d'insuffisance des modèles dynamiques classiques pour décrire les comportements lorsque des aspects évènementiels interviennent. Une classe particulièrement importante de SDH est formée par celle qui présente un régime permanent cyclique. Ces systèmes ont des points de fonctionnement non auto-maintenables: il n'existe pas de commande qui maintienne le système sur ce point. Le maintien n'est assuré qu'en valeur

APA, Harvard, Vancouver, ISO, and other styles

6

Patino, Diego. "Pilotage des cycles limites dans les systèmes dynamiques hybrides : application aux alimentations électriques statiques." Phd thesis, Institut National Polytechnique de Lorraine - INPL, 2009. http://tel.archives-ouvertes.fr/tel-00381971.

Full text

Abstract:

Cette thèse s'intéresse au pilotage des cycles limites pour une classe particulière de systèmes hybrides (SDH) : les systèmes commutés cycliques. La thématique des SDH est née du constat d'insuffisance des modèles dynamiques classiques pour décrire les comportements lorsque des aspects évènementiels interviennent. Une classe particulièrement importante de SDH est formée par celle qui présente un régime permanent cyclique. Ces systèmes ont des points de fonctionnement non auto-maintenables : il n'existe pas de commande qui maintienne le système sur ce point. Le maintien n'est assuré qu'en valeu

APA, Harvard, Vancouver, ISO, and other styles

7

Gonçalves, Marco Aurélio da Fontoura. "UM ESTUDO SOBRE IMPLEMENTAÇÃO DE CICLOS DE USINAGEM ATRAVÉS DE PROGRAMAÇÃO PARAMETRIZADA EM MÁQUINAS DE COMANDO NUMÉRICO COMPUTADORIZADO." Universidade Federal de Santa Maria, 2007. http://repositorio.ufsm.br/handle/1/8419.

Full text

Abstract:

The computer numerical control (CNC) machines can be programmed. They have functions that help to get different superficies of varied geometry in the manufacturing process of mechanical parts. This research has the purpose to present a methodology of application of the resources of parametrized programming for the developing of manufacturing cycles to a machine (CNC). The parametrized programming seems to be an efficient tool to implement routines that the machine does not have. By using traditional programming resources, it reduces the number of programming lines in relation to more used meth

APA, Harvard, Vancouver, ISO, and other styles

8

Gebreslassie, Berhane Hagos. "Optimization of environmentally friendly solar assisted absorption cooling systems." Doctoral thesis, Universitat Rovira i Virgili, 2010. http://hdl.handle.net/10803/8499.

Full text

Abstract:

La optimización de los sistemas de conversión de energía gana cada vez más importancia debido a su impacto ambiental y los limitados recursos de combustibles fósiles. Entre estos sistemas los de refrigeración tienen una contribución creciente en el consumo total de energía y en las emisiones de CO2. Los sistemas de absorción operados con energía solar son una de las alternativas más sostenibles frente a los sistemas de refrigeración convencionales. Por lo tanto, este trabajo se centra en su mejora siguiendo los métodos de optimización termo-económica y de programación matemática. El análisis e

APA, Harvard, Vancouver, ISO, and other styles

9

Jama, Fartun. "Integrating secure programming concepts in introductory programming courses." Thesis, Linnéuniversitetet, Institutionen för datavetenskap och medieteknik (DM), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-96870.

Full text

Abstract:

The number of vulnerable systems with exploitable security defects has increased. This led to an increase in the demand for secure software systems. Software developers lack security experiences to design and build secure software, some even believe security is not their responsibility. Despite the increased need for teaching security and secure programming, security is not well integrated into the undergraduate computing curriculum and is only offered as part of a program or as an elective course. The aim of this project is to outline the importance of incorporating security and secure progra

APA, Harvard, Vancouver, ISO, and other styles

10

Sumitomo, Jiro. "A programming model and performance model for cycle stealing." Queensland University of Technology, 2006. http://eprints.qut.edu.au/16320/.

Full text

Abstract:

This work describes a programming model and performance model for cycle stealing on the Internet. Cycle stealing is the use of otherwise idle computers to perform work, and promises high performance computing at relatively low cost. The Internet, being the largest pool of potentially idle computers, is an obvious target for cycle stealing. However, computers connected to the Internet are often protected by firewalls, preventing point-to-point communication between them. The fluctuating avail-ability of computers for cycle stealing as they move in and out of an idle state, combined with the

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Programming cycles"

1

United States. Department of Agriculture. Office of Information Resources Management. Application systems life cycle management manual. U.S. Dept. of Agriculture, Office of Information Resources Management, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gurikov, Sergey. Basics of algorithmization and programming in Microsoft Visual Basic. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/982532.

Full text

Abstract:

This tutorial covers the basics of algorithmization and programming in Microsoft Visual Basic. Contains a description of such traditional material necessary for learning the basics of algorithmization as the operation of linear, branching, and cyclic structures, processing one-dimensional and two-dimensional arrays, programming using functions and procedures, string processing, and so on. We discuss the data types used in VB, review the main controls of the programming environment, and pay attention to data input and output methods. It also describes how to work with graphics based on the GDI+

APA, Harvard, Vancouver, ISO, and other styles

3

Asia and the Pacific Programme of Educational Innovation for Development. Work plan of APEID for the sixth programming cycle, 1997-2001. Unesco Principal Regional Office for Asia and the Pacific, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Asia and the Pacific Programme of Educational Innovation for Development. Work plan of APEID for the fifth programming cycle, 1992-1996. Unesco Principal Regional Office for Asia and the Pacific, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

United States. Dept. of the Interior. Office of the Secretary. A Project manager's guide to application systems life cycle management. The Department, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Raymond, McLeod, ed. Software testing: Testing across the entire software development life cycle. John Wiley & Sons, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Secretary, U. S. Dept of the Interior Office of the. Application systems life cycle management departmental manual handbook (376 DM10). Office of the Secretary, United States Dept. of the Interior, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Sunazuka, Toshihiko. Integrating automated support for a software management cycle into the TAME system. University of Maryland, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mayeske, George W. Life cycle program management & evaluation: An heuristic approach. 2nd ed. Extension Service, U.S. Dept. of Agriculture, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Mayeske, George W. Life cycle program management & evaluation: An heuristic approach. 2nd ed. Extension Service, U.S. Dept. of Agriculture, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Programming cycles"

1

Hodges, Bernard. "Canned cycles/macros." In CNC Part Programming Workbook. Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-12683-5_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yuster, Raphael, and Uri Zwick. "Finding even cycles even faster." In Automata, Languages and Programming. Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/3-540-58201-0_96.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Björklund, Andreas, Thore Husfeldt, and Sanjeev Khanna. "Approximating Longest Directed Paths and Cycles." In Automata, Languages and Programming. Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-27836-8_21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Chiu-Man, Christine C., Anders Nygren, and Laura De Souza. "Pacemaker Timing Cycles, Programming, and Troubleshooting." In Cardiac Arrhythmia Management. John Wiley & Sons, Ltd., 2013. http://dx.doi.org/10.1002/9781118788967.ch9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Apt, Krzysztof R. "Explaining Constraint Programming." In Processes, Terms and Cycles: Steps on the Road to Infinity. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11601548_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Salavatipour, Mohammad R., and Jacques Verstraete. "Disjoint Cycles: Integrality Gap, Hardness, and Approximation." In Integer Programming and Combinatorial Optimization. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11496915_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Cortier, Véronique, and Eugen Zălinescu. "Deciding Key Cycles for Security Protocols." In Logic for Programming, Artificial Intelligence, and Reasoning. Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11916277_22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Efthymiou, Charilaos, and Paul G. Spirakis. "On the Existence of Hamiltonian Cycles in Random Intersection Graphs." In Automata, Languages and Programming. Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11523468_56.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Vazirani, Vijay V., and Mihalis Yannakakis. "Pfaffian orientations, 0/1 permanents, and even cycles in directed graphs." In Automata, Languages and Programming. Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/3-540-19488-6_149.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Escolar, Emerson G., and Yasuaki Hiraoka. "Optimal Cycles for Persistent Homology Via Linear Programming." In Optimization in the Real World. Springer Japan, 2015. http://dx.doi.org/10.1007/978-4-431-55420-2_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Programming cycles"

1

Steele, Guy L. "Programming language life cycles." In the 2012 ACM conference. ACM Press, 2012. http://dx.doi.org/10.1145/2402676.2402705.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kudekar, Shrinivas, Jason K. Johnson, and Misha Chertkov. "Improved linear programming decoding using frustrated cycles." In 2013 IEEE International Symposium on Information Theory (ISIT). IEEE, 2013. http://dx.doi.org/10.1109/isit.2013.6620476.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dey, Tamal K., Anil N. Hirani, and Bala Krishnamoorthy. "Optimal homologous cycles, total unimodularity, and linear programming." In the 42nd ACM symposium. ACM Press, 2010. http://dx.doi.org/10.1145/1806689.1806721.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Wei, Yi-Ling, H. X. Chen, S. W. Chou, and E. S. Jeng. "On the interface recovery of SNOI devices during programming-erasing cycles." In 2016 5th International Symposium on Next-Generation Electronics (ISNE). IEEE, 2016. http://dx.doi.org/10.1109/isne.2016.7543293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Åsbogård, Mattias, Lars Johannesson, David Angervall, and Peter Johansson. "Improving System Design of a Hybrid Powertrain Using Stochastic Drive Cycles and Dynamic Programming." In SAE World Congress & Exhibition. SAE International, 2007. http://dx.doi.org/10.4271/2007-01-0304.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Higuchi, K., T. O. Iwasaki, and K. Takeuchi. "Investigation of Verify-Programming Methods to Achieve 10 Million Cycles for 50nm HfO2 ReRAM." In 2012 4th IEEE International Memory Workshop (IMW). IEEE, 2012. http://dx.doi.org/10.1109/imw.2012.6213665.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Xue, Yuan, Patrick Cronin, Chengmo Yang, and Jingtong Hu. "Non-volatile memories in FPGAs: Exploiting logic similarity to accelerate reconfiguration and increase programming cycles." In 2015 IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC). IEEE, 2015. http://dx.doi.org/10.1109/vlsi-soc.2015.7314398.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Sardarmehni, Tohid, and Xingyong Song. "Sub-Optimal Control of Autonomous Wheel Loader With Approximate Dynamic Programming." In ASME 2019 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/dscc2019-9248.

Full text

Abstract:

Abstract Optimal control of wheel loaders in short loading cycles is studied in this paper. For modeling the wheel loader, the data from a validated diesel engine model is used to find a control oriented mean value engine model. The driveline is modeled as a switched system with three constant gear ratios (modes) of −60 for backwarding, 60 for forwarding, and zero for stopping. With these three modes, the sequence of active modes in a short loading cycle is fixed as backwarding, stopping, forwarding, and stopping. For the control part, it is assumed that the optimal path is known a priori. Giv

APA, Harvard, Vancouver, ISO, and other styles

9

Morrison, James R., Hungil Kim, and Adar A. Kalir. "Mean cycle time optimization in semiconductor tool sets via pm planning with different cycles: A G/G/m queueing and nonlinear programming approach." In 2014 Winter Simulation Conference - (WSC 2014). IEEE, 2014. http://dx.doi.org/10.1109/wsc.2014.7020090.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ramaswamy, Nikhil, and Nader Sadegh. "Optimization of Fuel Economy of Hybrid Electric Vehicles Using Set Based Dynamic Programming." In ASME 2014 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/dscc2014-6170.

Full text

Abstract:

Dynamic Programming (DP) technique is an effective algorithm to find the global optimum. However when applying DP for finite state problems, if the state variables are discretized, it increases the cumulative errors and leads to suboptimal results. In this paper we develop and present a new DP algorithm that overcomes the above problem by eliminating the need to discretize the state space by the use of sets. We show that the proposed DP leads to a globally optimal solution for a discrete time system by minimizing a cost function at each time step. To show the efficacy of the proposed DP, we ap

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Programming cycles"

1

Knotek-Smith, Heather, and Jeffrey Gerald. Environmental Quality Requirements Model Program Objective Memorandum Fiscal Years 2021–2025. Engineer Research and Development Center (U.S.), 2020. http://dx.doi.org/10.21079/11681/39101.

Full text

Abstract:

This document describes the methodology used to evaluate the costs incurred by organizations involved in planning, programming, budgeting, and execution of the Army’s environmental programs and estimating those costs for future year planning cycles, this model is referred to as the Environmental Quality Requirements Model (EQRM). The EQRM is used to develop the budget positions as presented to Congress to obtain the Operations and Maintenance appropriations. These appropriations fund the Environmental Quality Program which includes Compliance, Conservation and Pollution Prevention requirements

APA, Harvard, Vancouver, ISO, and other styles

2

Brinkerhoff, Derick W., Sarah Frazer, and Lisa McGregor-Mirghani. Adapting to Learn and Learning to Adapt: Practical Insights from International Development Projects. RTI Press, 2018. http://dx.doi.org/10.3768/rtipress.2018.pb.0015.1801.

Full text

Abstract:

Adaptive programming and management principles focused on learning, experimentation, and evidence-based decision making are gaining traction with donor agencies and implementing partners in international development. Adaptation calls for using learning to inform adjustments during project implementation. This requires information gathering methods that promote reflection, learning, and adaption, beyond reporting on pre-specified data. A focus on adaptation changes traditional thinking about program cycle. It both erases the boundaries between design, implementation, and evaluation and reframes

APA, Harvard, Vancouver, ISO, and other styles

3

Amela, R., R. Badia, S. Böhm, R. Tosi, C. Soriano, and R. Rossi. D4.2 Profiling report of the partner’s tools, complete with performance suggestions. Scipedia, 2021. http://dx.doi.org/10.23967/exaqute.2021.2.023.

Full text

Abstract:

This deliverable focuses on the proling activities developed in the project with the partner's applications. To perform this proling activities, a couple of benchmarks were dened in collaboration with WP5. The rst benchmark is an embarrassingly parallel benchmark that performs a read and then multiple writes of the same object, with the objective of stressing the memory and storage systems and evaluate the overhead when these reads and writes are performed in parallel. A second benchmark is dened based on the Continuation Multi Level Monte Carlo (C-MLMC) algorithm. While this algorithm is norm

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!