Books on the topic 'Projectiles'

Mario, Carpo, and Barrett Clare, eds. Projectiles. London: Architectural Association London, 2011.

1957-, Croft Tony, ed. Modelling with projectiles. Chichester, West Sussex, England: E. Horwood, 1988.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., ed. Collision forces for compliant projectiles. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Hamilton, Sue L. Forensic ballistics: Styles of projectiles. Edina, Minn: ABDO Pub. Co., 2008.

McDaniel, E. W. Atomic collisions: Heavy particle projectiles. New York: John Wiley, 1993.

Rucker, Michelle A. Ablative shielding for hypervelocity projectiles. [Washington, DC: National Aeronautics and Space Administration, 1992.

McDaniel, Earl Wadsworth. Atomic collisions: Heavy particle projectiles. New York: Wiley, 1993.

Rawat, Aseem Singh. Development of laser based velocity measuring instruments using time of flight principle. Mumbai: Bhabha Atomic Research Centre, 2005.

Elischer, Paul P. The development of low cost 155mm practice ammunition: A feasibility study. Ascot Vale, Vic: Materials Research Laboratories, 1986.

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Airbreathing propulsion for missiles and projectiles. Neuilly sur Seine, France: AGARD, 1992.

Mestre, Neville De. The mathematics of projectiles in sport. Cambridge: Cambridge University Press, 1990.

McDaniel, Earl Wadsworth. Atomic collisions: Electron and photon projectiles. New York: Wiley, 1989.

Bongrain, Gilles. Histoire technique & tactique du projectile. Chaumont: Crépin-Leblond, 2005.

Act, Canada Centre For Mineral and Energy Technology Administration of the Canada Explosives. Apparatus For Measuring the Velocity of Projectiles. S.l: s.n, 1985.

Tauber, Michael E. Trajectory characteristics and heating of hypervelocity projectiles having large ballistic coefficients. Moffett Field, Calif: Ames Research Center, 1986.

Rom, Josef. Analysis of the velocity limits of hyper velocity projectiles in the in-tube chemical accelerators. Haifa, Israel: Faculty of Aerospace Engineering Technion, Israel Institute of Technology, 1995.

Barrillot, Bruno. Uranium appauvri: Un dossier explosif. Villeurbanne: Golias, 2001.

Melton, Jack W. Melton & Pawl's guide to Civil War artillery projectiles. Kennesaw, Ga: Kennesaw Mountain Press, 1996.

Ahuja, J. K. Investigation of shock-induced combustion past blunt projectiles. Hampton, Va: Langley Research Center, 1996.

Moore, Frank G. Approximate methods for weapon aerodynamics. Reston, VA: American Institute of Aeronautics and Astronautics, 2000.

Ritzel, D. V. Numerical evaluation of Whitham's F-function for supersonic projectiles. [S.l.]: [s.n.], 1988.

(Australia), Materials Research Laboratories, ed. Mechanical properties and fracture toughness assessment of M795 and M549 155mm Artillery projectile bodies manufactured from HF-1 steel. Ascot Vale, Vic: Materials Research Laboratories, 1986.

(Australia), Materials Research Laboratories, ed. The Use of deformation markings to estimate the launch accelerations experienced by the Phalanx round. Ascot Vale, Vic: Materials Research Laboratories, 1987.

L, Geers T., Shin Y. S, American Society of Mechanical Engineers. Winter Meeting, American Society of Mechanical Engineers. Applied Mechanics Division., and American Society of Mechanical Engineers. Pressure Vessels and Piping Division., eds. Dynamic response of structures to high-energy excitations: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia, December 1-6, 1991. New York, N.Y: ASME, 1991.

Ludwig, Stiefel, ed. Gun propulsion technology. Washington, DC: American Institute of Aeronautics and Astronautics, 1988.

DeMarco, F. Improved home-built recoilless launchers. Boulder, Colo: Paladin Press, 1995.

Takayama, K. Ram Accelerators: Proceedings of the Third International Workshop on Ram Accelerators Held in Sendai, Japan, 16-18 July 1997. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998.

Great Britain. Health and Safety Executive., ed. Assessment of aprons for protection against drop forging projectiles. Sudbury: HSE Books, 2001.

Waschl, J. A. A reactive multi-material first order numerical model for heat conduction in cylindrical coordinates. Ascot Vale, Vic: Dept. of Defence, Materials Research Laboratories, 1987.

International Workshop on Ram Accelerators (4th 1999 Poitiers, France). RAMAC-IV: Proceedings : Fourth International Workshop on Ram Accelerators : ENSMA--University of Poitiers, France, September 13-17, 1999. [Paris, France]: EDP Sciences, 2000.

Markovskiĭ, Viktor. Sovetskie aviat︠s︡ionnye rakety: "vozdukh-zemli︠a︡". Moskva: Izdatelʹskiĭ t︠s︡entr "Ėksprint", 2005.

Palau, Antonio Planas. La útil honda balear nutrida de plomo (Silio Itálico). Eivissa [Spain]: "Sa Nostra" Caixa de Balears, 1994.

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Guidance and control of precision guided weapons. Neuilly sur Seine, France: AGARD, 1988.

Ritzel, D. V. The overpressure signature from a supersonic projectile. [Downsview, Ont.]: Institute for Aerospace Studies, 1987.

Programme, United Nations Environment, ed. Depleted uranium in Bosnia and Herzegovina: Post-conflict environmental assessment. Nairobi, Kenya: United Nations Environment Programme, 2003.

Stegmüller, Manfred. Von Flanschengeschossen und Wolframkernen: Die Entwicklung der Hochgeschwindigkeitsmunition für konische Rohre durch Dr. Hans Neufeldt und die Firma Polte, Magdeburg. Leinburg: W. Sünkel, 2000.

Programme, United Nations Environment, ed. Depleted uranium in Serbia and Montenegro: Post-conflict environmental assessment. [Geneva?]: United Nations Environment Programme, 2002.

United Nations Environment Programme. Depleted uranium in Serbia and Montenegro: Post-conflict environmental assessment. Nairobi, Kenya: United Nations Environment Programme, 2002.

Programme, United Nations Environment, ed. Depleted uranium in Bosnia and Herzegovina: Post-conflict environmental assessment. [Geneva, Switzerland]: UNEP, 2003.

G, Crouch I., and Materials Research Laboratory (Australia), eds. Analysis of the perforation of monolithic and simple laminate aluminium targets as a test of analytical deformation models. Ascot Vale, Vic: Dept. of Defence, Materials Research Laboratory, 1988.

Yungster, S. Simulation of unsteady hypersonic combustion around projectiles in an expansion tube. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., ed. Trajectory characteristics and heating of hypervelocity projectiles having large ballistic coeffients. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1988.

Friedrich, Hörz, and United States. National Aeronautics and Space Administration., eds. Penetration experiments in aluminum 1100 targets using soda-lime glass projectiles. [Washington, D.C.]: NASA, 1995.

England, James Brian Anderson. Collected publications on the interaction of light complex projectiles with nuclei. Birmingham: University of Birmingham, 1990.

McCoy, Robert. Modern exterior ballistics: The launch and flight dynamics of symmetric projectiles. Atglen, PA: Schiffer Publishing, 1999.

Voss, Peter. Achtundneunzig britische Bombenzünder bis 1945. Hamburg: P. Voss, 1997.

Center, Langley Research, ed. Review of nuclear physics experiments for space radiation. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2011.

Center, Ames Research, ed. Optimization study of the Ames 0.5" two-stage light gas gun. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1996.

Study of Projectiles: Science of Projectiles. Independently Published, 2020.

Hamilton, Sue L. Forensic Ballistics : Styles of Projectiles: Styles of Projectiles. ABDO Publishing Company, 2008.