Log in

Relevant bibliographies by topics / Properties of Stainless Steel Powder

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Properties of Stainless Steel Powder'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Properties of Stainless Steel Powder.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Properties of Stainless Steel Powder"

1

Brytan, Z. "The corrosion resistance of laser surface alloyed stainless steels." Journal of Achievements in Materials and Manufacturing Engineering 2, no. 92 (2018): 49–59. http://dx.doi.org/10.5604/01.3001.0012.9662.

Full text

Abstract:

Purpose: of this paper was to examine the corrosion resistance of laser surface alloyed (LSA) stainless steels using electrochemical methods in 1M NaCl solution and 1M H2SO4 solution. The LSA conditions and alloying powder placement strategies on the material's corrosion resistance were evaluated. Design/methodology/approach: In the present work the sintered stainless steels of different microstructures (austenitic, ferritic and duplex) where laser surface alloyed (LSA) with elemental alloying powders (Cr, FeCr, Ni, FeNi) and hard powders (SiC, Si3N4) to obtain a complex steel microstructure o

APA, Harvard, Vancouver, ISO, and other styles

2

Dudek, Agata, and Barbara Lisiecka. "Surface Treatment Proposals for the Automotive Industry by the Example of 316L Steel." Multidisciplinary Aspects of Production Engineering 1, no. 1 (2018): 369–76. http://dx.doi.org/10.2478/mape-2018-0047.

Full text

Abstract:

Abstract Nowadays, stainless steels are very interesting and promising materials with unique properties. They are characterized high mechanical strengths, high toughness and good corrosion resistance, so that can be used in many industrial sectors. An interesting alternative to steels obtained using the conventional methods is sintered stainless steel manufactured using the powder metallurgy technology. AISI 316L stainless steel is one of the best-known and widely used austenitic stainless steel. Modification of surface properties of stainless steels, in particular by applying the Cr3C2 coatin

APA, Harvard, Vancouver, ISO, and other styles

3

Xu, Feng, Jiwei Zhou, Rencai Chang, Dongling Zhang, Hui Wang, and Xiaoning Tian. "The Mechanical and Self-Sensing Performance of Reactive Powder Cement Concrete with Nano-Stainless Steel Powder." Coatings 13, no. 7 (2023): 1153. http://dx.doi.org/10.3390/coatings13071153.

Full text

Abstract:

In order to prepare cement concrete with high mechanical properties and durability, nano-stainless steel powder reactive powder cement concrete (RPC) was manufactured. The dosage of nano-stainless steel powder ranged from 0% to 1.2% by the total volume of the RPC. In this study, the compressive and flexural strengths of the RPC with nano-stainless steel powder were determined, the dry shrinkage rate of the RPC was tested and the electrical resistance and alternating current (AC) impedance spectrum of the RPC were measured; moreover, the corresponding strain-sensing properties were investigated

APA, Harvard, Vancouver, ISO, and other styles

4

Türkmen, Mustafa, Alla Muhammed Tanouz, Mahir Akgün, and Mehmet Akif Erden. "The Effect of Mn and Ti Ratio on Microstructure and Mechanical and Machinability Properties of 316 L Stainless Steel Used in Biomedical Applications." Metals 13, no. 11 (2023): 1804. http://dx.doi.org/10.3390/met13111804.

Full text

Abstract:

In this study, titanium (Ti) and manganese (Mn) element powders in determined amounts (0.35–0.75 and 1.5 wt %) were added into the 316 L stainless steel matrix by means of powder metallurgy (PM) technology, either individually or in pairs, and the desired composition was obtained as a powder mixture. The powders used in the study were cold-pressed tensile sample molds prepared in ASTM E8M standards, unidirectionally cold-pressed under 750 MPa compression pressure and formed into blocks. After pressing, the raw strength samples were sintered in an atmosphere-controlled tube furnace at 1250 °C f

APA, Harvard, Vancouver, ISO, and other styles

5

Dobrzański, Leszek Adam, Z. Brytan, Marco Actis Grande, and Mario Rosso. "Properties of Vacuum Sintered Duplex Stainless Steels." Advanced Materials Research 15-17 (February 2006): 828–33. http://dx.doi.org/10.4028/www.scientific.net/amr.15-17.828.

Full text

Abstract:

This work presents the possibility of obtaining duplex stainless steels through powder metallurgy technology starting from austenitic X2CrNiMo17-12-2, martensitic X6Cr13 powders by controlled addition of alloying elements, such as Cr, Ni, Mo, Cu in the right quantity to obtain the chemical composition of the structure similar to biphasic one. Moreover the ferritic stainless steel X6Cr17 has been mixed to austenitic stainless steel in the ratio of 50%-50% in order to exam the deriving structure after sintering. In the studies behind the preparation of mixes, Schaffler’s diagram was taken into c

APA, Harvard, Vancouver, ISO, and other styles

6

Dellis, Ch, G. Le Marois, J. M. Gentzbittel, G. Robert, and F. Moret. "Properties of HIPed stainless steel powder." Journal of Nuclear Materials 233-237 (October 1996): 183–87. http://dx.doi.org/10.1016/s0022-3115(96)00159-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Brytan, Zbigniew, Marco Actis Grande, Mario Rosso, Róbert Bidulský, and L. A. Dobrzański. "Stainless Steels Sintered Form the Mixture of Prealloyed Stainless Steel and Alloying Element Powders." Materials Science Forum 672 (January 2011): 165–70. http://dx.doi.org/10.4028/www.scientific.net/msf.672.165.

Full text

Abstract:

The aim of the presented paper is to describe the sintered duplex stainless steels manufactured in sinter-hardening process and their structural and mechanical properties. Duplex stainless steels were obtained through powder metallurgy starting from austenitic 316L or ferritic 410L prealloyed base powders by controlled addition of alloying elements powder. Prepared mixes were compacted at 700MPa and sintered in a vacuum furnace with argon backfilling at temperature of 1240°C for 1h. After sintering different cooling cycles were applied: rapid cooling (6°C/s) using nitrogen under pressure and s

APA, Harvard, Vancouver, ISO, and other styles

8

Pokorný, J., D. Nečas, A. Dobkowska, et al. "Austenitic stainless steel with yttrium oxide dispersion." Journal of Physics: Conference Series 3035, no. 1 (2025): 012010. https://doi.org/10.1088/1742-6596/3035/1/012010.

Full text

Abstract:

Abstract Enhancing traditional materials’ mechanical properties can be achieved by adding ultrafine oxide particles to inhibit dislocation movement, thus increasing strength. Understanding oxide dispersion in metallic alloys is crucial for developing new high-strength materials. Incorporating ultrafine oxide particles into austenitic steels, besides strength, may result in corrosion properties improvement. In this study, we prepared oxide dispersion-strengthened austenitic stainless steel 316L by mechanical alloying of 316L steel powder with Y2O3 particles. Powder precursors were consolidated

APA, Harvard, Vancouver, ISO, and other styles

9

Černý, Michal, Josef Filípek, Pavel Mazal, and David Varner. "Notch aspects of RSP steel microstructure." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 60, no. 5 (2012): 49–60. http://dx.doi.org/10.11118/actaun201260050049.

Full text

Abstract:

For a rather long time, basic research projects have been focused on examinations of mechanical properties for Rapid Solidification Powder (RSP) steels. These state-of-art steels are commonly known as “powdered steels“. In fact, they combine distinctive attributes of conventional steel alloys with unusual resistance of construction material manufactured by so called “pseudo-powdered” metallurgy.Choice of suitable materials for experimental verification was carried out based on characteristic application of so called “modern steel”. First, groups of stainless and tool steel types (steel grades

APA, Harvard, Vancouver, ISO, and other styles

10

Gatões, Daniel, Ricardo Alves, Bernardo Alves, and Maria Teresa Vieira. "Selective Laser Melting and Mechanical Properties of Stainless Steels." Materials 15, no. 21 (2022): 7575. http://dx.doi.org/10.3390/ma15217575.

Full text

Abstract:

Metal additive manufacturing (AM) has been evolving in response to industrial and social challenges. However, new materials are hindered in these technologies due to the complexity of direct additive manufacturing technologies, particularly selective laser melting (SLM). Stainless steel (SS) 316L, due to its very low carbon content, has been used as a standard powder in SLM, highlighting the role of alloying elements present in steels. However, reliable research on the chemical impact of carbon content in steel alloys has been rarely conducted, despite being the most prevalent element in steel

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Properties of Stainless Steel Powder"

1

Smuk, Olena. "Microstructure and properties of modern P/M super duplex stainless steels." Doctoral thesis, KTH, Materials Science and Engineering, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3758.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Roos, Stefan. "Process Development for Electron Beam Melting of 316LN Stainless Steel." Licentiate thesis, Mittuniversitetet, Institutionen för kvalitets- och maskinteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-37840.

Full text

Abstract:

Additive manufacturing (AM) is a technology that inverts the procedure of traditional machining. Instead of starting with a billet of material and removing unwanted parts, the AM manufacturing process starts with an empty workspace and proceeds to fill this workspace with material where it is desired, often in a layer-by-layer fashion. Materials available for AM processing include polymers, concrete, metals, ceramics, paper, photopolymers, and resins. This thesis is concerned with electron beam melting (EBM), which is a powder bed fusion technology that uses an electron beam to selectively mel

APA, Harvard, Vancouver, ISO, and other styles

3

Krishna, Jayanth. "Fatigue properties of Laser Powder Bed Fusion (LPBF) built 21-6-9 stainless stee." Thesis, Högskolan Väst, Avdelningen för avverkande och additativa tillverkningsprocesser (AAT), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-16788.

Full text

Abstract:

Fatigue performance is one of the important mechanical properties which is hindering some of the additive manufacturing build structures. The main objective of this study is to investigate the fatigue life dependence of the 21-6-9 austenitic stainless-steel build using the laser powder bed fusion (LPBF) technique. The study is mainly focused on the fracture surface based on defects and the micro constituents, how they are related to the fatigue performance of the samples. 21 samples were build using optimized process parameters in which 9 of the samples were built-in vertical direction and the

APA, Harvard, Vancouver, ISO, and other styles

4

Sheikh, Abdi Mohamed, and Yosef Gebresilassie. "Consequences of Magnetic Properties in Stainless Steel for a High-efficiency Wave Power Generator." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-229479.

Full text

Abstract:

A new kind of wave power generator is being developed at KTH Royal Institute of Technology which potentially can reach an efficiency of 98 %. However, this generator’s small air gap sets strict requirements on the stiffness of the structure to withstand the large magnetic forces. The structure, therefore, need to be both stiff and non-magnetic. To tackle that problem austenitic stainless steel will be used. Then again, austenitic stainless steel tends to become slightly magnetic because of impurities and mechanical stress. The purpose of this report is to study the magnetic properties of the a

APA, Harvard, Vancouver, ISO, and other styles

5

JANDAGHI, MOHAMMADREZA. "Development of the additively manufactured stainless steel 316L and AlSi10Mg alloys by in situ alloying and post-process treatment." Doctoral thesis, Politecnico di Torino, 2023. https://hdl.handle.net/11583/2976602.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Stephen, Juanita Peche. "3-D Printing, Characterizing and Evaluating the Mechanical Properties of 316L Stainless Steel Materials with Gradient Microstructure." Thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/102780.

Full text

Abstract:

Making gradient in the microstructure of metals is proven to be a superior method for improving their mechanical properties. In this research, we 3D print, characterize and evaluate the mechanical properties of 316L Stainless Steel with a gradient in their microstructure. During 3D printing, the gradient in the microstructure is created by tailoring the processing parameters (hatch spacing, scanning speed, and laser power and scanning speed) of the Selective Laser Melting (SLM). The Materials with Graded Microstructure (MGMs) are characterized by optical and scanning electron microscopy (SEM).

APA, Harvard, Vancouver, ISO, and other styles

7

Abdelghany, K. "Evaluating the properties of products fabricated from commercial steel powders using the selective laser micro-welding rapid manufacturing technique." Journal for New Generation Sciences, Vol 8, Issue 1: Central University of Technology, Free State, Bloemfontein, 2010. http://hdl.handle.net/11462/546.

Full text

Abstract:

Published Article<br>Selective laser micro-welding (SLMW) is a recent rapid manufacturing technique that produces metal parts through the use of a laser beam that selectively scans over the powder layers and fully melts and micro-welds the metallic particles. The advantage of SLMW is that any type of commercial steel alloys or other metal powders can be used to build parts in a single step without the need to add low melting point additives to join the particles as in the former SLS process. In this study, two types of low cost general purpose powders were evaluated as the raw materials for t

APA, Harvard, Vancouver, ISO, and other styles

8

Kurian, Sachin. "Process-Structure-Property Relationship Study of Selective Laser Melting using Molecular Dynamics." Thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/104115.

Full text

Abstract:

Selective Laser Melting (SLM), a laser-based Additive Manufacturing technique has appealed to the bio-medical, automotive, and aerospace industries due to its ability to fabricate geometrically complex parts with tailored properties and high-precision end-use products. The SLM processing parameters highly influence the part quality, microstructure, and mechanical properties. The process-structure-property relationship of the SLM process is not well-understood. In the process-structure study, a quasi-2D model of Micro-Selective Laser Melting process using molecular dynamics is developed to inve

APA, Harvard, Vancouver, ISO, and other styles

9

CUNTO, GABRIEL G. de. "Aplicação do conceito "vazamento antes da falha" (LEAK BEFORE BREAK) em tubulações de aço 316LN soldado com metal de adição 316L." reponame:Repositório Institucional do IPEN, 2017. http://repositorio.ipen.br:8080/xmlui/handle/123456789/27963.

Full text

Abstract:

Submitted by Marco Antonio Oliveira da Silva (maosilva@ipen.br) on 2017-11-01T17:02:12Z No. of bitstreams: 0<br>Made available in DSpace on 2017-11-01T17:02:12Z (GMT). No. of bitstreams: 0<br>Este trabalho apresenta um estudo prático da aplicação do conceito Leak Before Break (LBB), usualmente aplicado em usinas nucleares, em uma tubulação fabricada a partir de aço AISI 316LN soldada com a utilização de eletrodo revestido AISI 316L. O LBB é um critério fundamentado em análises de mecânica da fratura, que considera que um vazamento proveniente de uma trinca, presente em uma tubulação, possa se

APA, Harvard, Vancouver, ISO, and other styles

10

TAHAEI, Ali. "Investigation on welding and corrosion properties of the UNS S32304 & UNS S32570 duplex stainless steels and development of Nickel-Tungsten Carbide hardfacing by Plasma Transferred Arc (PTA) process." Doctoral thesis, Università degli studi di Ferrara, 2016. http://hdl.handle.net/11392/2403215.

Full text

Abstract:

Gli acciai inossidabili duplex presentano proprietà meccaniche, resistenza alla corrosione e tenacità superiori rispetto agli acciai inossidabili ferritici, austenitici e martensitici. L’ottimo bilanciamento delle loro proprietà è dovuto alla particolare microstruttura che è costituita da percentuali pressoché uguali di ferrite (δ) e di austenite (γ). L’austenite è responsabile della resistenza a corrosione e della tenacità, la ferrite fornisce l’elevata resistenza meccanica; grazie a questa combinazione di proprietà l’acciaio inossidabile duplex offre molti vantaggi rispetto agli acciai inoss

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Properties of Stainless Steel Powder"

1

Klar, Erhard. Powder metallurgy stainless steels. ASM International, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

N, Gunn Robert, ed. Duplex stainless steels: Microstructure, properties and applications. Abington Publishing, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

American Society of Mechanical Engineers. Winter Meeting. Properties of stainless steels in elevated temperature service: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987. ASME, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ordelt, Thomas. Corrosion properties of brazed stainless steel heat exchangers. UMIST, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wood, Gregory John. Tribological properties of surface engineered martensitic stainless steel. University of Birmingham, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

K, Mundali U., and Raj Baldev 1947-, eds. High nitrogen steels and stainless steel: Manufacturing properties and applications. Narosa, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lis, Andrzej K. Stale o strukturze wielofazowej. Wydawn. Politechniki Częstochowskiej, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

J, Shack W., Argonne National Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research., eds. Mechanical properties of thermally aged cast stainless steels from Shippingport Reactor components. Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

G, Atteridge D., U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering., and Oregon Graduate Institute of Science and Technology. Dept. of Materials Science and Engineering., eds. Quantitative measurement and modeling of sensitization development in stainless steel. Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Feridoonian, Sadegh. An investigation of the electrical properties of stainless steel fibre-filled polypropylene composites. Brunel University, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Properties of Stainless Steel Powder"

1

Dobrzański, Leszek A., Z. Brytan, Marco Actis Grande, and Mario Rosso. "Sintered Duplex Stainless Steels Corrosion Properties." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.721.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kawakami, Yuji, Fujio Tamai, Takashi Enjoji, Kazuki Takashima, and Masaaki Otsu. "Wear Resistance Properties of Tungsten Carbide/Stainless Steel Composite Materials Prepared by Pulsed Current Sintering." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.1573.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Tojal, C., T. Gómez-Acebo, and F. Castro. "Development of PM Stainless Steels with Improved Properties through Liquid Phase Sintering." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.661.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Xie, Caibo, Songhan Nie, Yiqi Tao, and Zhanpeng Lu. "Correlating IASCC Growth Rate Data to Some Key Parameters for Austenitic Stainless Steels in High Temperature Water." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_89.

Full text

Abstract:

AbstractAustenitic stainless steels have been widely used for fabricating reactor core-internal components in PWRs due to its high strength, ductility and fracture toughness. The accelerated failure or degradation of austenitic stainless steel represented by IASCC has become one of the key problems affecting the safe and efficient operation of reaction core-internal in PWR nuclear power plants. IASCC is generally divided into three stages: crack initiation, crack propagation and instable fracture. Among the three stages, the crack initiation stage would occupy the major service time, the crack

APA, Harvard, Vancouver, ISO, and other styles

5

Nakano, Kouichi. "Evaluation of Physical and Optical Properties on Functionally Graded Piping Joint Made from Cu and Austenitic Stainless Steel Powder." In PRICM. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch296.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Nakano, Kouichi. "Evaluation of Physical and Optical Properties on Functionally Graded Piping Joint Made from Cu and Austenitic Stainless Steel Powder." In Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48764-9_296.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Afshari, Elham, Donald Paul Bishop, and Ali Nasiri. "Effect of TiC Addition on Microstructure and Mechanical Properties of CX Stainless Steel Produced via Laser Powder Bed Fusion." In Proceedings of the 63rd Conference of Metallurgists, COM 2024. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-67398-6_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lucas, T., R. G. Ballinger, H. Hanninen, and T. Saukkonen. "Effect of Thermal Aging on SCC, Material Properties and Fracture Toughness of Stainless Steel Weld Metals." In 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118456835.ch91.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lucas, T., R. G. Ballinger, H. Hanninen, and T. Saukkonen. "Effect of Thermal Aging on SCC, Material Properties and Fracture Toughness of Stainless Steel Weld Metals." In Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems — Water Reactors. Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48760-1_54.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Sarker, Dyuti, Usman Ali, Farid Ahmed, et al. "Influence of Pore Formation and Its Role on the Tensile Properties of 17-4 PH Stainless Steel Fabricated by Laser Powder Bed Fusion." In TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65261-6_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Properties of Stainless Steel Powder"

1

Murkute, Pratik, O. Burkan Isgor, and Somayeh Pasebani. "Electrochemical Investigation of Super Duplex Stainless Steel Cladded Carbon Steel Manufactured via Powder Bed Selective Laser Melting." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13538.

Full text

Abstract:

Abstract This study aims to investigate the electrochemical and corrosion properties of super duplex stainless steel (SDSS) cladded low carbon steel (LCS) manufactured using powder bed fusion selective laser melting (PBF-SLM) technique in 3.56 wt.% NaCl aqueous solution. The PBF-SLM technique involves spreading of a thin layer of SDSS powder on a LCS substrate followed by localized melting with Yb - fiber laser. Crucial parameters of the PB-SLM process such as laser power, laser-scanning speed, and layer thickness were optimized and fine-tuned to achieve the best possible bonding between the c

APA, Harvard, Vancouver, ISO, and other styles

2

Lardon, Jean-Marc, and Karin Jacobsson. "High Nitrogen Super-Austenitic Stainless Steel for Heavy Thickness Components in Oil and Gas." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-3967.

Full text

Abstract:

Abstract Though highly alloyed stainless steels or corrosion resistant nickel based alloys are widely used for many applications involving corrosion issues, their use remain mostly limited to relatively small wall thickness components. The manufacture of large wall thickness forgings is difficult as the highly corrosion resistant alloys (super-duplex stainless steels, 6Mo super-austenitic stainless steels, Ni-Cr-Mo or Ni-Cr-Mo-W alloys) cannot be made from large size ingots without significant segregation of the alloying elements. Segregations cannot be always removed with the thermo-mechanica

APA, Harvard, Vancouver, ISO, and other styles

3

Goland, Micaela, Fanny Balbaud, Alexis Fouchereau, et al. "Corrosion Behavior of Additively Manufactured Stainless Steels in Nuclear Environments." In AM-EPRI 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p0023.

Full text

Abstract:

Abstract This study examines the corrosion resistance of additively manufactured 316L stainless steel (SS) for nuclear applications across three environments: pressurized water reactor primary water (PWR PW), hot concentrated nitric acid, and seawater. Wire-feed laser additive manufacturing (WLAM) specimens showed oxidation behavior similar to wrought 316L SS in PWR PW, though stress corrosion cracking (SCC) susceptibility varied with heat treatment. In nitric acid testing, laser powder bed fusion (L-PBF) specimens demonstrated superior corrosion resistance compared to conventional SS, primari

APA, Harvard, Vancouver, ISO, and other styles

4

Martin, G., and F. Blanchard. "Development of New Duplex Stainless Steels Corrosion Resistance - New Techniques of Production." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92409.

Full text

Abstract:

Abstract The main characteristics of super duplex stainless steel tubes and pipes according to UNS S32760 (25Cr 7Ni 3.5Mo W N) with a PREN ≥ 40 are described. Physical properties, pitting and crevice corrosion resistance, and stress corrosion cracking behavior are compared with other alloys also likely to be used in chloride and sea water environments. The interest of the powder metallurgy route for manufacturing seamless tubes in this alloy is underlined.

APA, Harvard, Vancouver, ISO, and other styles

5

Prochaska, Stephanie, and Owen Hildreth. "Impact of Support Dissolution on the Corrosion Resistance of 316L Stainless Steels." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16449.

Full text

Abstract:

Abstract Metal additive manufacturing (AM) generally requires removal of support structures through costly post processing which may limit part design and complexity. A novel process developed at the Colorado School of Mines has dramatically simplified post processing by sensitizing and selectively corroding support material. While this process has been proven for 316L stainless steel, the corrosion response of the stainless steel after etching is unknown. To determine whether the corrosion-resistant properties of the stainless steel are maintained, this paper evaluates additively manufactured

APA, Harvard, Vancouver, ISO, and other styles

6

Rautio, Timo, Mikko Hietala, Matias Jaskari, and Antti Järvenpää. "Comparative Study of Microstructural and Mechanical Properties of Wire Arc Additive Manufactured 316L Stainless Steel." In 2024 International Conference on Power, Energy and Innovations (ICPEI). IEEE, 2024. http://dx.doi.org/10.1109/icpei61831.2024.10748616.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Foroni, Luca, Carlo Malara, and Louis Lherbier. "Corrosion Resistance of Large Components Produced from AF932N High Nitrogen Stainless Steel Ingots." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09322.

Full text

Abstract:

Abstract The availability of large components with high corrosion resistance and mechanical strength combined with high toughness is becoming an increasing need in oil and gas industry as well as for power and petrochemical applications. Duplex and super-duplex stainless steels provide a good combination of such properties but they are limited in thickness because of strong toughness reduction and possible presence of sigma phase on large sections. Because of the well-known beneficial effect of nitrogen on austenite stabilization, corrosion resistance, strength and toughness, high nitrogen aus

APA, Harvard, Vancouver, ISO, and other styles

8

Tsuchiya, Y., F. Kano, N. Saito, M. Ookawa, J. Kaneda, and N. Hara. "Corrosion and SCC Properties of Fine Grain Stainless Steel in Subcritical and Supercritical Pure Water." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07415.

Full text

Abstract:

Abstract Fine grain austenitic stainless steels developed by means of cold work and a heat treatment process to improve the material properties for use in supercritical water-cooled power reactor (SCWR). The corrosion and Stress Corrosion Cracking (SCC) properties, were subsequently evaluated and described in the present paper. Results of corrosion test indicated that the corrosion rates of fine grain 304L SS and fine grain 310S SS were as low as 1/30~1/70 of those of the normal grain size Type 304L SS and Type 310S SS at 550°C. It was found that the grain refinement improved corrosion resista

APA, Harvard, Vancouver, ISO, and other styles

9

Tate, Stephen, Ben Schaeffer, and Brad Barnhart. "Evaluation of Directed Energy Deposition 316LSi Stainless Steel Pressure Boundary Parts." In AM-EPRI 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p1054.

Full text

Abstract:

Abstract Additive manufacturing is being considered for pressure boundary applications for power plant service by ASME Boiler and Pressure Vessel Code and regulators. Both existing and new plants could benefit from the reduced lead times, design flexibility, and part consolidation possible with additive manufacturing. Various ASME code committees are working towards rules and guidance for use of additive manufacturing. To further the industry's understanding, this research program was undertaken to evaluate the properties of wire arc additive manufactured 316L stainless steel. This study inclu

APA, Harvard, Vancouver, ISO, and other styles

10

Zissel, Kai, Elena Bernardo Quejido, Tobias Deckers, Pierre Forêt, and Eduard Hryha. "Binder Jetting - Reusability Of 17-4 PH Stainless Steel Powder." In World Powder Metallurgy 2022 Congress & Exhibition. EPMA, 2022. http://dx.doi.org/10.59499/wp225371888.

Full text

Abstract:

Binder Jetting (BJT) is a binder-based Additive Manufacturing technology, where only a small fraction of the processed powder is bonded inside the green parts after printing. Unbound powder, which is recovered during the BJT process, is reused for printing. For powder reuse, the resulting changes in the physical and chemical powder properties along with the powder surface conditions strongly affect the reproducibility of the BJT process and its final part properties. In this study, the powder degradation and its impact on the reusability of 17-4 PH stainless steel powder are evaluated for the

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Properties of Stainless Steel Powder"

1

Jacob, Gregor, Christopher U. Brown, M. Alkan Donmez, Stephanie S. Watson, and John Slotwinski. Effects of powder recycling on stainless steel powder and built material properties in metal powder bed fusion processes. National Institute of Standards and Technology, 2017. http://dx.doi.org/10.6028/nist.ams.100-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

DeHoff, R., and C. Glasgow. NanoComposite Stainless Steel Powder Technologies. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1048214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dehoff, Ryan R., and Greg Engleman. NanoComposite Stainless Steel Powder Technologies. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1055074.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Wilkes, K. E., J. P. Strizak, F. J. Weaver, J. E. Besser, and D. L. Smith. Thermophysical properties of stainless steel foils. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/658177.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lazarus, L. J. Milling and Drilling Evaluation of Stainless Steel Powder Metallurgy Alloys. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/789448.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Switzner, Nathan T. Stainless Steel Microstructure and Mechanical Properties Evaluation. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/1129927.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Korth, G. E. Mechanical properties of four RSP stainless steel alloys. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/542018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

J. A. Brooks, S. H. Goods, and C. V. Robino. Weld Properties of a Free Machining Stainless Steel. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/760519.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Rieken, Joel. Gas atomized precursor alloy powder for oxide dispersion strengthened ferritic stainless steel. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1048516.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kanne, W. R. High Strength Stainless Steel Properties that Affect Resistance Welding. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/784245.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!