Relevant bibliographies by topics / Prototype Magnetic Compass

Contents

  1. Journal articles
  2. Book chapters
  3. Conference papers
  4. Reports

Academic literature on the topic 'Prototype Magnetic Compass'

Author: Grafiati
Published: 2 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Prototype Magnetic Compass.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Prototype Magnetic Compass"

1

Osorio C., Román, José A. Romero, Mario Peña C., and Ismael López-Juárez. "Inteligent Line Follower Mini-Robot System." International Journal of Computers Communications & Control 1, no. 2 (2006): 73. http://dx.doi.org/10.15837/ijccc.2006.2.2287.

Full text
Abstract:
This paper shows a prototype development of an intelligent line follower mini-robot system, the objective is to recognize, understand and modify the actual performance of the movements of the robot during its pathway by way of getting information in real time from different magnetic sensors implemented in the system and based in a V2X digital compass, microcontroller and odometric measurements. The paper shows as well, the system characterization of the V2X sensor (digital compas) and the cost-benefit of the prototype implementation and performance. The programming techniques and easy operatio
APA, Harvard, Vancouver, ISO, and other styles
2

Kasatkin, S. I., P. A. Polyakov, O. P. Polyakov, et al. "Prototype of a Magnetic Locator Based on a Magnetoresistive Compass." Bulletin of the Russian Academy of Sciences: Physics 84, no. 2 (2020): 163–65. http://dx.doi.org/10.3103/s1062873820020148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhi, Menghui, Liang Tang, and Donghai Qiao. "Design and analysis of miniature tri-axial fluxgate magnetometer." Modern Physics Letters B 31, no. 05 (2017): 1750040. http://dx.doi.org/10.1142/s0217984917500403.

Full text
Abstract:
The detection technology of weak magnetic field is widely used in Earth resource survey and geomagnetic navigation. Useful magnetic field information can be obtained by processing and analyzing the measurement data from magnetic sensors. A miniature tri-axial fluxgate magnetometer is proposed in this paper. This miniature tri-axial fluxgate magnetometer with ring-core structure has a dynamic range of the Earth’s field ±[Formula: see text]65,000 nT, resolution of several nT. It has three independent parts placed in three perpendicular planes for measuring three orthogonal magnetic field compone
APA, Harvard, Vancouver, ISO, and other styles
4

Oliveira, J., A. Torres, A. J. N. Batista, et al. "Digitizer hardware for magnetic data acquisition on COMPASS-U." EPJ Web of Conferences 288 (2023): 03005. http://dx.doi.org/10.1051/epjconf/202328803005.

Full text
Abstract:
This paper presents the design and development of a modular digitizer prototype tailored for magnetic sensor data acquisition within the COMPASS-U tokamak facility, an upcoming experiment in Prague that will operate under conditions relevant to future experiments like ITER and DEMO. The magnetic diagnostic data serves a dual role, both for scientific analysis and real-time control. Due to the latter, the data integrity and fidelity is paramount for the plasma performance and overall safety of the fusion experiment. The digitizer prototype showcases a contemporary adaptation of prior board desi
APA, Harvard, Vancouver, ISO, and other styles
5

Xu, Xiaosu, Peijuan Li, and Jian-juan Liu. "A Fault-Tolerant Filtering Algorithm for SINS/DVL/MCP Integrated Navigation System." Mathematical Problems in Engineering 2015 (2015): 1–12. http://dx.doi.org/10.1155/2015/581909.

Full text
Abstract:
The Kalman filter (KF), which recursively generates a relatively optimal estimate of underlying system state based upon a series of observed measurements, has been widely used in integrated navigation system. Due to its dependence on the accuracy of system model and reliability of observation data, the precision of KF will degrade or even diverge, when using inaccurate model or trustless data set. In this paper, a fault-tolerant adaptive Kalman filter (FTAKF) algorithm for the integrated navigation system composed of a strapdown inertial navigation system (SINS), a Doppler velocity log (DVL),
APA, Harvard, Vancouver, ISO, and other styles
6

Филатов, В. И., and В. В. Астреин. "Analysis of appliance inertial and magnetic compass systems for ship-drone automatic control through program track." MORSKIE INTELLEKTUAL`NYE TEHNOLOGII)</msg> 1, no. 3(65) (2024): 330–38. http://dx.doi.org/10.37220/mit.2024.65.3.058.

Full text
Abstract:
В статье приводятся результаты натурных испытаний прототипа судна-робота надводного базирования РТК-07V. Данный аппарат представляет из себя робототехнический комплекс, предназначенный для плавания по заданной программной траектории. Основной целью транспортных роботов является перевозка различных грузов, что является актуальным направлением отечественного вектора технического развития. Такой класс робототехнических комплексов находит широкое применение в разных областях и промышленных отраслях. Робот решает несколько задач, среди которых: следование объекта управления согласно заданной програ
APA, Harvard, Vancouver, ISO, and other styles
7

Maier, S., T. Gostner, F. van de Camp, and A. H. Hoppe. "OUTDOOR AR-APPLICATION FOR THE DIGITAL MAP TABLE." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLIV-3/W1-2020 (November 18, 2020): 93–98. http://dx.doi.org/10.5194/isprs-archives-xliv-3-w1-2020-93-2020.

Full text
Abstract:
Abstract. In many fields today, it is necessary that a team has to do operational planning for a precise geographical location. Examples for this are staff work, the preparation of surveillance tasks at major events or state visits and sensor deployment planning for military and civil reconnaissance. For these purposes, Fraunhofer IOSB is developing the Digital Map Table (DigLT). When making important decisions, it is often helpful or even necessary to assess a situation on site. An augmented reality (AR) solution could be useful for this assessment. For the visualization of markers at specifi
APA, Harvard, Vancouver, ISO, and other styles
8

Gonçalves, Bruno, Paulo Varela, António Silva, et al. "Advances, Challenges, and Future Perspectives of Microwave Reflectometry for Plasma Position and Shape Control on Future Nuclear Fusion Devices." Sensors 23, no. 8 (2023): 3926. http://dx.doi.org/10.3390/s23083926.

Full text
Abstract:
Providing energy from fusion and finding ways to scale up the fusion process to commercial proportions in an efficient, economical, and environmentally benign way is one of the grand challenges for engineering. Controlling the burning plasma in real-time is one of the critical issues that need to be addressed. Plasma Position Reflectometry (PPR) is expected to have an important role in next-generation fusion machines, such as DEMO, as a diagnostic to monitor the position and shape of the plasma continuously, complementing magnetic diagnostics. The reflectometry diagnostic uses radar science me
APA, Harvard, Vancouver, ISO, and other styles
9

Smerdov, R. S., Yu M. Spivak, V. A. Moshnikov, and A. S. Mustafaev. "Magnetic and Plasmonic Composite Nanostructures for Creating Optical Filters at Substance and Material Diagnostics Systems." Journal of the Russian Universities. Radioelectronics 24, no. 3 (2021): 81–97. http://dx.doi.org/10.32603/1993-8985-2021-24-3-81-97.

Full text
Abstract:
Introduction. Porous silicon (PS) and materials on its basis are of interest for application in nanoelectronics, targeted drug delivery and advanced gas sensors. In addition, PS-based nanostructures are promising as filters in fibre-optic communication systems, since conventional thin-film deposition filters possess sidebands in their operating range thus requiring high vacuum for nanometer-thick coatings.Aim. To develop optical band-stop filter prototypes based on composite magnetic nanoparticles and the effect of localized surface plasmon resonance (LSPR) in an array of silver nanoparticles
APA, Harvard, Vancouver, ISO, and other styles
10

Potet, A., R. Belkhou, P. Berteaud, et al. "A bi-periodic undulator for SOLEIL II: concept and prototype." Journal of Physics: Conference Series 3010, no. 1 (2025): 012024. https://doi.org/10.1088/1742-6596/3010/1/012024.

Full text
Abstract:
Abstract The recent improvements in the field of synchrotron light sources push the limits of brightness and pave the way for new scientific research. The upgrade of Synchrotron SOLEIL, called SOLEIL II, aims at optimizing photon production by reducing the natural horizontal emittance of the electron beam to less than 100 pm.rad, compared to 3.9 nm.rad presently. However, the new lattice [1] imposes a 30% reduction in the space reserved for some insertion devices. SOLEIL is presently looking for technical solutions such as compact radiation sources to take into account this space constraint. A
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Prototype Magnetic Compass"

1

Valtonen Mikko and Parviainen Asko. "Permanent Magnet Generator for Hybrid Electric Vehicle." In Studies in Applied Electromagnetics and Mechanics. IOS Press, 2010. https://doi.org/10.3233/978-1-60750-604-1-383.

Full text
Abstract:
Hybrid electric vehicle (HEV) may include a combustion engine which operates associated with an electric generator. The electric generator converts the mechanical energy produced by the combustion engine into electric energy, which is converted with AC &amp;ndash; DC transducer to DC voltage and stored in the batteries or super capacitors or used directly in driving motors of HEV. For such applications, a compact, high performance electric machine is required. This paper proposes axial-flux permanent magnet machines for such applications. As a prototype, a 120 kW permanent magnet generator is
APA, Harvard, Vancouver, ISO, and other styles
2

Underwood Joshua, Tate A. Rosemary, Luckin Rosemary, et al. "A Prototype Decision Support System for MR Spectroscopy-Assisted Diagnosis of Brain Tumours." In Studies in Health Technology and Informatics. IOS Press, 2001. https://doi.org/10.3233/978-1-60750-928-8-561.

Full text
Abstract:
Our objective is to develop a decision support system that improves the accuracy of non-invasive brain tumour diagnosis and grading by enabling radiologists to use data from Magnetic Resonance Spectroscopy (MRS). The system, which uses pattern recognition techniques, is trained on a validated database of spectra and associated clinical information to provide automated classification of spectra from brain tumours. An innovative user-interface presents classification results as a two-dimensional overview plot in which points representing cases of different diseases form distinct clusters. Users
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Prototype Magnetic Compass"

1

Heaps, William S. "Flight Results for the Balloon Borne Ozone Profiler with Variable Footprint." In Optical Remote Sensing of the Atmosphere. Optica Publishing Group, 1993. http://dx.doi.org/10.1364/orsa.1993.the.7.

Full text
Abstract:
A prototype of the balloon borne ozone profiler with variable footprint has been developed and was flown from Fort Sumner, New Mexico and September 30, 1992. The instrument was composed of a 100 mm grating spectrograph with an intensified diode array detector covering a spectral range from 250 nm to 350 nm. Scanning of the horizon was accomplished with a right angle dichroic mirror driven by a stepper motor. The viewing direction was determined by a shaft encoder on the scanning mirror and a magnetic compass fixed to the balloon gondola. Altitude was determined using a global positioning syste
APA, Harvard, Vancouver, ISO, and other styles
2

Scherrer, Matthias, Erwin Hauser, and Rudolf Scheidl. "Simulation Study of Permanent Magnetic Actuation for a Hydraulic Valve With Hysteresis Response Behavior." In BATH/ASME 2020 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/fpmc2020-2724.

Full text
Abstract:
Abstract For the realization of compact and lightweight digital hydraulic cylinder drives for exoskeleton actuation the hydraulic binary counter concept was proposed. This counter principle is based on hydraulically piloted switching valves which feature a hysteretic response with respect to the pilot pressure. In first prototypes of that counter bistable mechanical buckling beams realized the hysteretic response. Their performance suffered from high friction in the hinges and high local stresses. Furthermore, they require tight manufacturing tolerances not only of themselves but also of their
APA, Harvard, Vancouver, ISO, and other styles
3

Yoo, JinHyoeng. "A Modeling of Fe-Ga Magnetostrictive Shunt Damper." In ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/smasis2014-7641.

Full text
Abstract:
This study presents mechanical energy dissipation with a proof-of-concept prototype magnetostrictive (Fe-Ga alloy, galfenol) based shunt circuit using passive electrical components. Magneto strictive material can harvest electricity out of the structural vibrations based on the Villari effect using permanent magnet and pickup coil configuration. The device in this study consists of a polycrystalline galfenol strip bonded to a brass cantilever beam. Two brass pieces, each containing a permanent magnet, are used to mass load at the end of the beam and to provide a magnetic bias field through the
APA, Harvard, Vancouver, ISO, and other styles
4

Kim, Ha-Yong, and Chong-Won Lee. "Design and Control of Active Magnetic Bearing System With Lorentz Force Type Axial Actuator." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/vib-48542.

Full text
Abstract:
As the size of 5-axis active magnetic bearing (AMB) gets smaller, the space limitation for installation of axial magnetic bearing unit becomes stringent. In this paper, a new type of compact, high-performance 5-axis AMB with solid cores and rotor is proposed, which consists of four permanent magnets, four U-shaped cores and 16 control coils. The proposed homopolar AMB system is levitated by the Lorentz type axial as well as Maxwell type radial forces. Based on the magnetic flux distribution analysis, the control algorithm is designed to account for the coupled effect between the radial and axi
APA, Harvard, Vancouver, ISO, and other styles
5

B, Vidhya, Roopesh Shroff, and Avdhut Sabnis. "A Novel Interior Permanent Magnet Synchronous Motor with High Strength Soft Magnetic Composite Powders as Stator-Rotor Material for Electric Vehicle Application." In WCX SAE World Congress Experience. SAE International, 2023. http://dx.doi.org/10.4271/2023-01-0832.

Full text
Abstract:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;This paper presents the design of Interior Permanent Magnet Synchronous motor (IPMSM) using Soft Magnetic Composite (SMC) material for Electric Vehicle (EV) applications. In EV, the electric motor is characterized by high power density, high torque, low weight and cost efficient. The high torque, high power to weight ratio and high mechanical strength Synchronous Motor along with the SMC structures will make it suitable candidate for such an EV application. With this focus the new SMC material Somaloy 3P is proposed as a
APA, Harvard, Vancouver, ISO, and other styles
6

Gallentine, James, Nithin S. Kumar, and Eric J. Barth. "A Compact Electropermanent Magnet Valve Geometry for Switching of Magnetorheological Fluid Using Particle Jamming." In BATH/ASME 2024 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/fpmc2024-140393.

Full text
Abstract:
Abstract Electropermanent magnetic (EPM) valves consist of two permanent magnets, one with high coercivity and one with relatively low coercivity, which are able to rapidly redirect the flux within a magnetic circuit. When combined with magnetorheological (MR) fluid, they provide the ability to rapidly switch flow in a hydraulic circuit on or off. EPM valves contain no moving parts and draw no power except when changing state. These facts, along with their scalability, make them an attractive option for distributed flow control in small hydraulic systems. Current examples of EPM valves are oft
APA, Harvard, Vancouver, ISO, and other styles
7

Scully, Brian, Lei Zuo, Jurgen Shestani, and Yu Zhou. "Design and Characterization of an Electromagnetic Energy Harvester for Vehicle Suspensions." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12091.

Full text
Abstract:
During the everyday usage of an automobile, only 10–16% of the fuel energy is used to drive the car — to overcome the resistance from road friction and air drag. One important loss is the dissipation of vibration energy by shock absorbers in the vehicle suspension under the excitation of road irregularity and vehicle acceleration or deceleration. In this paper we design, characterize, and test a retrofit regenerative shock absorber which can efficiently recover the vibration energy in a compact space. Rare-earth permanent magnets and high permeable magnetic loop are used to configure a four-ph
APA, Harvard, Vancouver, ISO, and other styles
8

Khatri, Rasish, Larry Hawkins, Massimiliano Ortiz Neri, Francesco Cangioli, and Davide Biliotti. "Design and Prototype Test Data for a 300 kW AMB-Supported Turbine Generator for Natural Gas Pressure Letdown." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-91172.

Full text
Abstract:
Abstract A 300 kW integrated and fully-sealed turbine generator for natural gas pressure letdown (PLD) was developed by Baker Hughes, a GE company (BHGE), in conjunction with Calnetix Technologies. This paper describes the design and analysis of the generator, magnetic bearings, and touchdown bearings, with a focus on the dynamic performance and key characteristics of the machine. The permanent magnetic (PM) synchronous generator is supported by PM-biased, homopolar magnetic bearings and has a maximum continuous operating speed (MCOS) of 31.5 krpm. A touchdown bearing system is implemented usi
APA, Harvard, Vancouver, ISO, and other styles
9

Alvim, Larissa Terto, Vagner Mendonça Gonçalves, Matheus A. O. Ribeiro, and Fátima L. S. Nunes. "A Prototype for Interactive Information Visualization as Support for Computer-Aided Diagnosis." In Anais Estendidos do Simpósio Brasileiro de Computação Aplicada à Saúde. Sociedade Brasileira de Computação (SBC), 2025. https://doi.org/10.5753/sbcas_estendido.2025.6990.

Full text
Abstract:
Computer-Aided Diagnosis (CAD) can offer a second opinion to help physicians compose a more precise diagnosis, and interactive Information Visualization (IV) tools can complement CAD systems by providing a more intuitive way to interpret data from patients and exams. In this study, we developed an interactive IV prototype to improve comprehension of a flexible database for a CAD system in the cardiomyopathies context. This prototype is integrated with a web application to retrieve Cardiac Magnetic Resonance exams, and a qualitative evaluation conducted with health professionals showed that IV
APA, Harvard, Vancouver, ISO, and other styles
10

Raghunath, Ganesh, Alison B. Flatau, Ashish Purekar, and Jin-Hyeong Yoo. "Non-Contact Torque Measurement Using Magnetostrictive Galfenol." In ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3227.

Full text
Abstract:
This work deals with the development of a non-contact torque sensor system prototype made from rolled and textured Galfenol, a magnetostrictive alloy of Iron and Gallium. It is already known that this smart material exhibits a linear response to strain in the presence of appropriate biasing magnets. The response of a sensor system built from it follows commercially available strain gages. In this research, the magnetic change in Galfenol due to shear strain experienced by the shaft in torque will be monitored using Hall effect sensors to derive the torque information. Factors affecting the per
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Prototype Magnetic Compass"

1

Arnold, Joshua. DTPH56-16-T-00004 EMAT Guided Wave Technology for Inline Inspections of Unpiggable Natural Gas Pipelines. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0012048.

Full text
Abstract:
This project developed compact, lightweight, prototype Electro-Magnetic Acoustic Transducers (EMATs) and studied guided waves for defect detection, classification, and characterization in cast iron and steel pipes. Through lab testing, design, and Finite Element Analysis (FEA), guided wave propagation and defect interactions were evaluated, and the results were employed to optimize the prototype EMATs through successive design and testing iterations. The goal of developing EMATs for robotic inspection of unpiggable pipe was successfully achieved and demonstrated not only through prototype fabr
APA, Harvard, Vancouver, ISO, and other styles
2

Johra, Hicham. Performance overview of caloric heat pumps: magnetocaloric, elastocaloric, electrocaloric and barocaloric systems. Department of the Built Environment, Aalborg University, 2022. http://dx.doi.org/10.54337/aau467469997.

Full text
Abstract:
Heat pumps are an excellent solution to supply heating and cooling for indoor space conditioning and domestic hot water production. Conventional heat pumps are typically electrically driven and operate with a vapour-compression thermodynamic cycle of refrigerant fluid to transfer heat from a cold source to a warmer sink. This mature technology is cost-effective and achieves appreciable coefficients of performance (COP). The heat pump market demand is driven up by the urge to improve the energy efficiency of building heating systems coupled with the increase of global cooling needs for air-cond
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Prototype Magnetic Compass' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography