Log in

Relevant bibliographies by topics / Pulling speed

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers

Academic literature on the topic 'Pulling speed'

Author: Grafiati

Published: 4 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pulling speed.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pulling speed"

1

Gabršček, S., and J. Holc. "Low‐speed crystal pulling mechanism." Review of Scientific Instruments 60, no. 10 (1989): 3352–53. http://dx.doi.org/10.1063/1.1140532.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Cheng, Zheng, Meili Song, Yong Liu, Hongbo Wu, and Haonan Ouyang. "Simulation and experimental study of aerodynamic characteristics of a rotor adsorption wall-climbing robot." Journal of Physics: Conference Series 2882, no. 1 (2024): 012094. http://dx.doi.org/10.1088/1742-6596/2882/1/012094.

Full text

Abstract:

Abstract High-rise buildings are prone to gusts of wind, especially crosswinds. In order to investigate the effect of crosswinds on the aerodynamic characteristics of rotor blades at different near-wall distances, a CFD simulation model is designed for four near-wall distances and five wind speeds, and the change curves of rotor pulling force, pressure cloud diagrams and velocity cloud diagrams are obtained by using Fluent for the various conditions. The mechanism and pattern of its influence on the aerodynamic characteristics of rotor blades are studied by observing the pulling force change c

APA, Harvard, Vancouver, ISO, and other styles

3

Gurdziel, Wojciech, Zygmunt Wokulski, Krzysztof Szostek, Jacek Krawczyk, and Paweł Stępniewski. "Crystallization of CoSi₂-Si Eutectic Composites." Solid State Phenomena 130 (December 2007): 85–88. http://dx.doi.org/10.4028/www.scientific.net/ssp.130.85.

Full text

Abstract:

The subject of the study is the composite material of CoSi2-Si eutectic composition. The influence of crystallization speed on microstructure was examined. The ingots were obtained using Bridgman method. Three different pulling down speeds of crucibles with melted charges were applied. The prepared samples were subjected to metallographic, X-ray, TEM techniques and mechanical examinations in order to characterize the properties of the studied composite material. It was shown that the favourable crucible pulling down speed to obtain CoSi2-Si fibrous eutectic microstructure was 3mm/h.

APA, Harvard, Vancouver, ISO, and other styles

4

Abdullah, Abdul Manaf. "Preparation and Characterization of PLA Filaments for FDM 3D Printing." Journal of Mechanical Engineering 22, no. 1 (2025): 223–32. https://doi.org/10.24191/jmeche.v22i1.4566.

Full text

Abstract:

Polylactic acid (PLA) is the predominant filament material utilised in fused deposition modelling (FDM) 3D printing. Despite being commonly utilised in FDM 3D printing, the fabrication of PLA filament involves a complex extrusion process that is not widely reported. This study aims to assess the thermal and melt flow behaviour of PLA. Besides, the impact of pulling speed on the resulting filament in terms of diameter, morphologies as well as mechanical properties was also quantified. The thermal behaviour of the PLA was evaluated using a thermogravimetric analyser and differential scanning cal

APA, Harvard, Vancouver, ISO, and other styles

5

Musil, J., and J. Červinka. "Measuring of pulling resistance in machinery with passive working organs." Research in Agricultural Engineering 53, No. 2 (2008): 47–53. http://dx.doi.org/10.17221/2121-rae.

Full text

Abstract:

A determination of the total pulling resistance of machinery is important in light of its dimensioning as well in light of energy requirements of processed operation. There are several methods to determine it. They can be divided to analytical methods (Goryachkin) and to methods of measurement in field-laboratory conditions using different kinds of force sensors. The most frequently used type is a sensor on the base of tensiometer, which was used during our work. Measured pulling resistance at three working speeds and at ranges of used depths of soil processing 82&minus;122 mm was 9.6&

APA, Harvard, Vancouver, ISO, and other styles

6

Xing, Qinsong, Suming Ding, Xinyu Xue, Longfei Cui, Feixiang Le, and Jian Fu. "Design and Testing of a Clamping Manipulator for Removing Abnormal Plants in Rape Breeding." Applied Sciences 13, no. 17 (2023): 9723. http://dx.doi.org/10.3390/app13179723.

Full text

Abstract:

Aiming at the time-consuming, laborious, and inefficient process of removing abnormal rape plants during breeding, combined with the agronomic requirements for planting rapeseed, a clamping manipulator was designed. This manipulator is mainly composed of hollow splints, grip-force sensors, connecting rods, cylinders and other components. Additionally, a removing test platform was built. Single-factor and Box-Behnken experiments were conducted. Taking the output air pressure, pulling angle and pulling speed as the test factors, the rape uprooted removal rate, rape removal breakage rate and pull

APA, Harvard, Vancouver, ISO, and other styles

7

Soepardi, Sugiono, Kadi Istrianto, M. Zainal Fanani, Markus Samu Samu, Suharyanto Suharyanto, and Robet Perangin-angin. "Engineering Purse Line Hauler Machine For Hydraulic Axle Capstan On Mini Purse Seine Boat." PELAGICUS 4, no. 2 (2023): 69. http://dx.doi.org/10.15578/plgc.v4i2.12279.

Full text

Abstract:

Purse seine or purse seine is one of the dominant fishing tools for catching pelagic (surface) fish which operates by circling schools (schooling) of fish. In the process of circling a school of fish, the bottom must be crimped immediately and quickly using a crimping rope or what is usually called a "drawstring" so that the fish remain in the circle and do not escape. This research was conducted from August to October 2019 on the north coast of Pekalongan, Java Sea. The application of hydraulically powered capstan axle crimp rope pulling machines on small scale vessels is expected to increase

APA, Harvard, Vancouver, ISO, and other styles

8

Wang, Zhenwei, Weisong Zhao, Jingjing Fu, Hu Xie, Yinping Zhang, and Mingjiang Chen. "V-Shaped Toothed Roller Cotton Stalk Puller: Numerical Modeling and Field-Test Validation." Agriculture 13, no. 6 (2023): 1157. http://dx.doi.org/10.3390/agriculture13061157.

Full text

Abstract:

The V-shaped toothed roller cotton stalk puller has a low removal ratio and weak pulling effect. Hence, we constructed a simplified mathematical model of the V-shaped tooth roller stalk puller based on elastic collision theory and simple beam theory and conducted a mechanical analysis based on this model to explore the causes of pulling errors and fractures. Specifically, the V-shaped tooth plates of the machine were optimized in an orthogonal experiment with the rotational speed, cogging angle, and ground clearance as the influencing factors, and the removal ratio as the evaluation index. Thi

APA, Harvard, Vancouver, ISO, and other styles

9

WYLIE, JONATHAN J., HUAXIONG HUANG, and ROBERT M. MIURA. "Thermal instability in drawing viscous threads." Journal of Fluid Mechanics 570 (January 3, 2007): 1–16. http://dx.doi.org/10.1017/s0022112006002709.

Full text

Abstract:

We consider the stretching of a thin viscous thread, whose viscosity depends on temperature, that is heated by a radiative heat source. The thread is fed into an apparatus at a fixed speed and stretched by imposing a higher pulling speed at a fixed downstream location. We show that thermal effects lead to the surprising result that steady states exist for which the force required to stretch the thread can decrease when the pulling speed is increased. By considering the nature of the solutions, we show that a simple physical mechanism underlies this counterintuitive behaviour. We study the stab

APA, Harvard, Vancouver, ISO, and other styles

10

Palit, Mithun, J. Arout Chelvane, Himalay Basumatary, et al. "Evolution of Texture during Directional Solidification of Giant Magnetostrictive Tb_0.3Dy_0.7Fe_1.95 Alloy." Materials Science Forum 702-703 (December 2011): 876–79. http://dx.doi.org/10.4028/www.scientific.net/msf.702-703.876.

Full text

Abstract:

The development of preferred grain orientation has been investigated in the directionally solidified samples of Tb0.3Dy0.7Fe1.95 as a function of pulling speed viz. 10, 40, 70 and 100 cm/h. The study indicates that at lower solidification rate (10 cm/h) growth of and texture components are preferred, whereas, texture component becomes dominant at higher pulling rate (100 cm/h). However, as the solidification progresses, growth of texture component is observed subduing the other components. Consequently, the magnetostriction improves from 1100 to 1350 micro-strains with higher pulling speed.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Pulling speed"

1

Cheung, Kie Chung. "High-speed manipulation of discrete objects by pushing or pulling." Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.276865.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Huang, Chong-Hao, and 黃重浩. "Study on the Pulling Speed Influence for Growth of Sapphire Single Crystal." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/84573571297160486081.

Full text

Abstract:

碩士<br>中華科技大學<br>機電光工程研究所碩士班<br>100<br>This study used Kyropoulos method for the growth of sapphire single crystal, to explore the influence of pulling speed to the sapphire quality during the growing process. In setting faster pulling rates for crystal growth parameters, firstly we did 0.5 mm/hr for 24 consecutive hours, then 0.3 mm/hr for 15 consecutive hours, and lastly 0.1 mm/hr for 90 consecutive hours to the end of the process. In setting the slower rates, we did 0.3 mm/hr for 65 consecutive hours, then 0.1 mm/hr for 93 consecutive hours to the end of the process. The two crystals were co

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Pulling speed"

1

Botti, Lucia, Cristina Mora, Giorgio Zecchi, and Giulia Baruffaldi. "The Effect of Speed Variation on Initial and Sustained Forces During Pushing and Pulling Activities: A Preliminary Study." In Advances in Manufacturing, Production Management and Process Control. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-94196-7_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Atkins, Peter, and Ronald Friedman. "The electric properties of molecules." In Molecular Quantum Mechanics. Oxford University Press, 2010. http://dx.doi.org/10.1093/hesc/9780199541423.003.0012.

Full text

Abstract:

This chapter examines the complexity of the electronic spectra of molecules, which occur in the visible and ultraviolet regions of the electromagnetic spectrum and arise in part from the stimulation of simultaneous vibrational and rotational transitions. It mentions electronic transition that changes the distribution of the electrons, and the nuclei respond to the new force field by breaking into vibration. In turn, the stimulation of vibration results in rotational transitions, just as ice skaters change the speed of their rotation by pulling in or throwing out their arms. The chapter deals w

APA, Harvard, Vancouver, ISO, and other styles

3

Morton, N. S., and W. Davis. "Preparation Of The Workplace And Equipment." In Assisting The Anaesthetist. Oxford University PressNew York, NY, 1997. http://dx.doi.org/10.1093/oso/9780192624444.003.0002.

Full text

Abstract:

Abstract ‘Be prepared’ is an old-fashioned motto but in anaesthesia it is a very important principle. When things go wrong during anaesthesia the speed of change can be alarming and the need for intervention must often be immediate to avoid harm to the patient. A good example is a patient having an abdominal operation; on opening the peritoneum the heart rate can slow dramatically within a few seconds - the treatment must be immediate or the heart rate may slow to dangerously low levels. The surgeon should stop pulling on the peritoneum - this causes the stimulation of the vagus nerves which c

APA, Harvard, Vancouver, ISO, and other styles

4

Reades, Jonathan, and Martin Crookston. "Moving Stuff Around." In Why Face-to-Face Still Matters. Policy Press, 2021. http://dx.doi.org/10.1332/policypress/9781529215991.003.0002.

Full text

Abstract:

Starting with the basics of infrastructure, Chapter 2 shows how it un-levels the playing field, making distant places ‘close’ and near places ‘far away’. Digital networks are obviously a focus, but so too are transportation and other less glamorous systems. Networks which ‘equalise’ space exert a centrifugal force on activity and growth, spinning it outward, deconcentrating the urban form. The nodal networks tend to reinforce concentration, pulling growth in a ‘centripetal’ way towards the best-connected central places. So infrastructure networks create a ‘surface’ across which locational choi

APA, Harvard, Vancouver, ISO, and other styles

5

Rajyam, Sumathi, N. R. Raajan, G. Samyuktha, V. Priyadharshini, and M. Sindhujaa. "Investigations on the Swiftness of a Quantum and a Classical Processor." In Advances in Web Technologies and Engineering. IGI Global, 2023. http://dx.doi.org/10.4018/978-1-6684-8306-0.ch013.

Full text

Abstract:

The cutting-edge technologies cloud computing and IoT are taking an upper hand in every domain. A huge and wide variety of data is being handled and processed by clouds. The cloud federation technique further adds up to this. In the coming years, quantum computers will replace the conventional computers. Pulling out particular data from the gigantic data set processed by clouds in a conventional computer would take a considerable amount of time. In the chapter, Grover's algorithm, a search algorithm, is implemented on traditional computers on IBM quantum simulator and also on QUIRK quantum sim

APA, Harvard, Vancouver, ISO, and other styles

6

Jones, Robert, Rob Oyung, and Lisa Shade Pace. "Applying Tools for Maximum Impact." In Working Virtually. IGI Global, 2005. http://dx.doi.org/10.4018/978-1-59140-585-6.ch019.

Full text

Abstract:

Early on, we mentioned that technology won’t solve all problems related to virtual teams. In fact, basic meeting management and project management skills and techniques are actually more important than trying to use the most sophisticated tools. For example, if you don’t have a meeting agenda with specific topics to discuss, identified decisions that need to be made, and owners for action items, the best virtual meeting tool is not going to automatically do those things for you. At the same time, if we didn’t have the tools we have today, virtual teams would not be possible, and the speed of b

APA, Harvard, Vancouver, ISO, and other styles

7

Morris Alexis and Ulieru Mihaela. "FRIEND: A Brain-Monitoring Agent for Adaptive and Assistive Systems." In Studies in Health Technology and Informatics. IOS Press, 2012. https://doi.org/10.3233/978-1-61499-121-2-314.

Full text

Abstract:

This paper presents an architectural design for adaptive-systems agents (FRIEND) that use brain state information to make more effective decisions on behalf of a user; measuring brain context versus situational demands. These systems could be useful for alerting users to cognitive workload levels or fatigue, and could attempt to compensate for higher cognitive activity by filtering noise information. In some cases such systems could also share control of devices, such as pulling over in an automated vehicle. These aim to assist people in everyday systems to perform tasks better and be more awa

APA, Harvard, Vancouver, ISO, and other styles

8

Gupta, Agrata, and N. Arulkumar. "An Exploratory Study of Python's Role in the Advancement of Cryptocurrency and Blockchain Ecosystems." In Advances in Systems Analysis, Software Engineering, and High Performance Computing. IGI Global, 2023. http://dx.doi.org/10.4018/978-1-6684-7100-5.ch012.

Full text

Abstract:

Blockchain is the foundation of cryptocurrency and enables decentralized transactions through its immutable ledger. The technology uses hashing to ensure secure transactions and is becoming increasingly popular due to its wide range of applications. Python is a performant, secure, scalable language well-suited for blockchain applications. It provides developers free tools for faster code writing and simplifies crypto analysis. Python allows developers to code blockchains quickly and efficiently as it is a completely scripted language that does not require compilation. Different models such as

APA, Harvard, Vancouver, ISO, and other styles

9

Parry, Graham. "William Camden." In The Trophies of Time. Oxford University PressOxford, 1996. http://dx.doi.org/10.1093/oso/9780198129622.003.0002.

Full text

Abstract:

Abstract Antiquarians, like poets, are born not made. There can be no rational explanation why some people are irresistibly fascinated by the remains of the past, impelled to make long journeys to view mounds of rubble, or moved to spend dim hours in libraries over half-legible manuscripts. It is an instinct, a passion. William Camden experienced it as a lifelong emotion. ‘Even when he was a schoolboy, he could neither hear nor see anything of an antique appearance, without more than ordinary attention and notice. ‘1 At Oxford in the 1560s ‘it was not in his power to keep within doors: the ben

APA, Harvard, Vancouver, ISO, and other styles

10

Ruprecht, Louis A. "Romantic Receptions, or, The Aeginetan Sculptures’ Long March to Munich." In Religious Convergence in the Ancient Mediterranean. Lockwood Press, 2019. http://dx.doi.org/10.5913/2019167.ch18.

Full text

Abstract:

My story begins in the early nineteenth century when Romantic Grand Tourists began to make Greece part of their itinerary, and began looting in the name of the nascent discipline of archaeology. There was a brief window—between 1803 when Napoleon closed the Italian peninsula to enemy tourists, and 1821 when the War for Independence against the Ottomans broke out—when Greece became an important travel destination. Byron’s epic, Childe Harold’s Pilgrimage (1812) set the Romantic taste for Greek travel and his caustic poem, “The Curse of Minerva” (1811), roundly condemned the activities of Lord E

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pulling speed"

1

Li, Jiarui, Jake R. Rosvold, Joseph B. Murray, Brandon Redding, and Giuliano Scarcelli. "High-speed stimulated Brillouin spectroscopy enabled by polarization pulling." In Optical Elastography and Tissue Biomechanics XII, edited by Kirill V. Larin and Giuliano Scarcelli. SPIE, 2025. https://doi.org/10.1117/12.3044025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yukhymchuk, Serhiі, Svitlana Yukhymchuk, Mykola Tolstushko, and Nataliya Tolstushko. "Checking performance of disc-belt flax pulling apparatus." In 23rd International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, Faculty of Engineering and Information Technologies, 2024. http://dx.doi.org/10.22616/erdev.2024.23.tf066.

Full text

Abstract:

Pulling devices are used to pull flax stalks from the soil during mechanized harvesting of fibre flax. Some of them are belt and belt-disc pulling devices, in which the pulling belts, which work as belt transmissions, stretch during operation and require periodic tightening, and replacement when worn. In addition, this design of pulling apparatuses is too material-intensive. This is due to the use of pulleys, tension and support rollers, complex drive. We offer a new design of the disc-belt pulling apparatus. In it, the drive is carried out directly on the pulling discs, and the pulling belts

APA, Harvard, Vancouver, ISO, and other styles

3

Boguslavskiy, I. Z., I. Yu Kruchinina, Yu Ph Khozikov, and A. S. Liubimtcev. "High-speed synchronous machines: Magnetic pulling tensioning forces calculation approach." In 2014 XXI International Conference on Electrical Machines (ICEM). IEEE, 2014. http://dx.doi.org/10.1109/icelmach.2014.6960177.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Anthes, J. P., P. Garcia, K. Y. Lau, and I. Ury. "High Speed Opto-Isolator for Radar Applications." In Picosecond Electronics and Optoelectronics. Optica Publishing Group, 1987. http://dx.doi.org/10.1364/peo.1987.we15.

Full text

Abstract:

We have designed, fabricated and tested a high speed opto-isolator utilizing state-of-the-art optoelectronic components operating at frequencies up to 6 GHz. This opto-isolator will be an indispensible component in modem radar systems and is used for preventing frequency-pulling of a low power oscillation due to reflected signals.

APA, Harvard, Vancouver, ISO, and other styles

5

Jiang, Lei, Ding Liu, Jing Zhang, and Weifeng Duan. "Nonlinear System Identification of CZ Silicon Crystal Growth between Pulling Speed and Diameter." In 2018 Chinese Automation Congress (CAC). IEEE, 2018. http://dx.doi.org/10.1109/cac.2018.8623375.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Michael Heaney, Francis, Matthew L. Lee, and Sudhir Gupta. "New Torque Balancing Algorithm Improves Pulling Force and Speed With Wireline Electro-Mechanical Tractor." In SPE/ICoTA Well Intervention Conference and Exhibition. SPE, 2022. http://dx.doi.org/10.2118/209010-ms.

Full text

Abstract:

Abstract The electro-mechanical eline tractor introduced in 2019 (Lee et al. 2019) has completed over 120 jobs. As discussed in the paper, one of the unique technology drivers was high tractoring speed to improve intervention efficiency. The tractor has several runs where the average rate exceeded 100 feet per minute and one job at 115 feet per minute over a 2900 ft lateral section. An additional attribute was the surface readout (SRO) telemetry and sensor data that proved invaluable in assessing tool performance, and specifically downhole tractor traction. Initial deployment of the electro-hy

APA, Harvard, Vancouver, ISO, and other styles

7

Kwanghun Kim and Sungsun Baik. "Optimization of pulling speed for decreasing thermal stress in different quartz crucible size with Czochralski method." In 2015 IEEE 42nd Photovoltaic Specialists Conference (PVSC). IEEE, 2015. http://dx.doi.org/10.1109/pvsc.2015.7355760.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Fatahillah, Cahyo Budiyantoro, and Aris Widyo Nugroho. "Effect of mold design, melting temperature and pulling speed on impregnation quality of carbon fiber reinforced polypropylene pellet." In INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2021. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0150454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Bulten, Norbert, and Petra Stoltenkamp. "Improved Sustainable Speed due to Thrusters With Ducted Propellers." In ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/omae2017-61085.

Full text

Abstract:

The selection of the propulsion system is made in the concept design phase, based on a trial design point. Evaluation of the vessel design and the propulsion units has been based on model scale measurements for decades. Recent developments of CFD simulations have brought these numerical simulations to a sufficient mature level, to be considered as a good alternative for the model scale measurements. Comparisons of CFD results for model scale and full scale have revealed new interesting insights in the Reynolds scaling effects. The actual operating conditions of offshore vessels are significant

APA, Harvard, Vancouver, ISO, and other styles

10

Hayyi, Abdul, Heru Suryanto, Aminudin, and Jibril Maulana. "Effect of pulling speed for the extrusion process on the tensile strength and fracture morphology of recycled polylactic acid filament." In PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON INFORMATICS ENGINEERING, SCIENCE & TECHNOLOGY (INCITEST) 2022. AIP Publishing, 2025. https://doi.org/10.1063/5.0253725.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!