Relevant bibliographies by topics / Pulp and paper industry

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Pulp and paper industry'

Author: Grafiati
Published: 4 June 2021
Last updated: 28 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pulp and paper industry.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pulp and paper industry"

1

Kameyama, Hideo. "Chemical heat pump in the pulp and paper industry." JAPAN TAPPI JOURNAL 41, no. 7 (1987): 583–91. http://dx.doi.org/10.2524/jtappij.41.583.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zarkovic, Darja, Milorad Krgovic, and Ljubinka Rajakovic. "Rationalization of water consumption in paper industry." Chemical Industry 58, no. 7-8 (2004): 327–37. http://dx.doi.org/10.2298/hemind0408327z.

Full text
Abstract:
The subject of this paper was to consider the possibilities of economical paper production with rationalization of water consumption. In accordance with the principles of viable development. The pulp & paper industry has had to face global market needs and strict regulation concerning the environment. The basic motive was to provide consistent and high product quality, which is competitive on the market. The pulp & paper industry is one of the largest consumers and pollutants of natural resources. In that light, the rationalization of raw material, water, energy and chemicals consumption with minimization of environmental impact is essential. The European directive on environmental protection obliges producers of pulp & paper to decrease the volume of wastewater and to increase the efficiency treatment. Pulp and paper industry in Serbia and Montenegro will also be faced with the demands for environmental protection. Numerous examples of water consumption rationalization and improvement of water quality in the pulp & paper industry could be found in different literature sources. It is necessary to increase water system closure and implement up-to-date treatment methods. The possibilities for water consumption rationalization, in a real system the paperboard mill UMKA, were examined.
APA, Harvard, Vancouver, ISO, and other styles
3

FUKUNAGA, NOBUYUKI. "Enzymes in Pulp and Paper Industry." Sen'i Gakkaishi 55, no. 6 (1999): P188—P192. http://dx.doi.org/10.2115/fiber.55.6_p188.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Iwatsu, Tokue, Makoto Usuda, Yasuo Matsushita, Masahira Takahashi, Takuro Mitsunaga, Kakuichi Tsue, Masaru Shibata, and Sergio Torza. "Future of Pulp and Paper Industry." JAPAN TAPPI JOURNAL 41, no. 11 (1987): 1081–102. http://dx.doi.org/10.2524/jtappij.41.1081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhu, Xiu Lian, Jie Wang, Ya Li Jiang, Yan Jun Cheng, Feng Chen, and Shao Bo Ding. "Feasibility Study on Satisfing Standard of Water Pollutants for Pulp and Paper Industry." Applied Mechanics and Materials 178-181 (May 2012): 637–40. http://dx.doi.org/10.4028/www.scientific.net/amm.178-181.637.

Full text
Abstract:
Contrasting《Discharge standard of water pollutants for pulp and paper industry》(GB3544-2008) to《Discharge standard of water pollutants for pulp and paper industry》(GB3544-2001), this article educes impact for pulp and paper industry by 《Discharge standard of water pollutants for pulp and paper industry》(GB3544-2008). This article discuss producing technics and dealing with waste water technics of pulp and paper industry, that satisfy GB3544-2008.
APA, Harvard, Vancouver, ISO, and other styles
6

Jiang, Shiyue, Binjie Li, and Yufei Shen. "The Influence of Pulp and Paper Industry on Environment." E3S Web of Conferences 308 (2021): 02007. http://dx.doi.org/10.1051/e3sconf/202130802007.

Full text
Abstract:
Currently, paper consumption is globally increasing and at an unsustainable level. However, traditional paper production could release excessive greenhouse gas emissions or wastewater, resulting in environmental contamination. To make the result more visual and persuasive, this study takes Time magazine as an example to analyze the impacts of the papermaking process on the environment. This study analyzes energy consumption from several sectors in the paper industry, carbon dioxide emissions, and discharge of condensed wastewater to show current consumption during traditional pulp and paper production. Results show that the papermaking process would consume a lot of electricity during the pulp preparing, pulp condition, pulp preparation, manufacture paper with pulp, and pulp processing stages. Meanwhile, various degree of carbon emissions is generated based on the physical and chemical changes in materials during the papermaking process. Two kinds of wastewater, including black and white liquor, are produced in the papermaking process. Several countermeasures are suggested to achieve a low consumption and sustainable development of the pulp and paper industry to solve these environmental problems. The suggestion includes the surrogate of electronic paper, carbon capture and storage, and wastewater recycling.
APA, Harvard, Vancouver, ISO, and other styles
7

Phung, Thanh Khoa, Quynh-Thy Song Nguyen, Khanh B. Vu, Giang Duy-Le Vo, and Vinh Ngoc Nguyen. "Potential applications of waste lignin from the paper and pulp industry in Viet Nam." Science and Technology Development Journal 23, no. 4 (October 9, 2020): 716–26. http://dx.doi.org/10.32508/stdj.v23i4.2442.

Full text
Abstract:
The conversion of waste lignin from the paper and pulp industry is a potential process to produce chemicals and materials in the industry. With the development and the demand for the pulp and paper industry, the amount of waste lignin will increase remarkably. In Vietnam, the forest tree for the pulp industry is abundant, and the pulp industry has increased in recent years. In parallel, the government planned to develop the material resource and high-tech factories for this industry. In this work, we summarized the pulp and paper industry in Vietnam, then suggest the potential applications of waste lignin in several valuable products.
APA, Harvard, Vancouver, ISO, and other styles
8

Kondo, Tadahiro. "The Pulp & Paper Industry in China." JAPAN TAPPI JOURNAL 48, no. 9 (1994): 1192–202. http://dx.doi.org/10.2524/jtappij.48.1192.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tomiie, Kazuo, and Kazuo Hanabusa. "Ozone application to the Paper-Pulp Industry." JAPAN TAPPI JOURNAL 49, no. 2 (1995): 294–98. http://dx.doi.org/10.2524/jtappij.49.294.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ando, Setuo. "The Antifoams for Pulp and Paper Industry." JAPAN TAPPI JOURNAL 53, no. 9 (1999): 1126–32. http://dx.doi.org/10.2524/jtappij.53.1126.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pulp and paper industry"

1

Hailu, Atakelty Gebremedihen. "Environmentally sensitive analysis of economic performance, productivity and efficiency in the Canadian pulp and paper industry, 1959-1994." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ34772.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lundmark, Robert. "Paper recovery and investment behaviour in the European pulp and paper industry." Licentiate thesis, Luleå tekniska universitet, Samhällsvetenskap, 2000. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-17295.

Full text
Abstract:
This thesis consists of an introductory part followed by two self-contained papers both analysing the effect recovered paper has on the locational choice for investments in the European pulp and paper industry. In the first paper we develop a continuous Cobb-Douglas investment model with the purpose of finding and estimating the investment determinants for the European pulp and paper industry, with special focus on the impact of recovered paper. The analysis is carried out within a neo-classical locational framework in which firms minimise the production and transportation costs for both input factors and for output products. We use a panel of data consisting of ten European countries over the period 1978 to 1995. The results suggests that both short and long run aspects of wastepaper recovery tend not to be important determinants of investment activities in the pulp and paper industry, whereas the price of wood pulp and electricity together with existing capacity seem to be more important. In the second paper we employ a different approach to the same problem. In this paper we develop a conditional logit model and compile the number of investment projects that were scheduled to be finished in 16 European countries between 1985 and 1995. In contrast to the first paper, which used continuous data, this model employs discrete data for the dependent variable. A discrete variable counts the actual number of times a certain event has taken place, i.e., the number of investment projects. The same set of determinants as in the first paper is used to ease comparing the two papers. We further break down the investment projects into four paper grades, which allow us to analyse the effects of wastepaper in greater detail. The results suggest that factor input prices in general and the price for wastepaper in particular are neither statistically nor economically significant location determinants for a paper manufacturer. Furthermore, the results suggest that market size and agglomeration effects are more important than the price of raw materials for location. On the basis of the results from the two papers, we can conclude that the price of wastepaper is not an important determinant for the European pulp and paper industry when choosing investment sites. Price driven policies aimed at stimulating paper recovery may therefore fail to achieve increased investments in the industry. At the same time, both papers suggests that agglomeration effects, i.e., existing productive capacity, is an important determinant. The economic significance of the agglomeration coefficients suggests that the power of sunk costs is important. Investments are largely diverted to existing capacity and the ability to attract new establishments is limited.
Godkänd; 2000; 20070315 (keni)
APA, Harvard, Vancouver, ISO, and other styles
3

Klein, Stephen Richard. "A regional analysis of supply in the Canadian pulp and paper sector." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/24826.

Full text
Abstract:
The purpose of this thesis was to analyse the supply of pulp and paper products in the three major producing provinces of Canada, namely British Columbia, Ontario and Quebec. A translog restricted profit function and its first partial derivatives were estimated using the iterative seemingly unrelated regressions procedure. Derived demand equations for energy, fibre, labour and supply equations for net market pulp, newsprint and 'other paper and paperboard", (net market pulp and 'all paper and paperboard' for British Columbia) were obtained with net supplies as a function of each input and output price. The success of the model in representing the industry was mixed. Derived demand own price elasticities were, in almost all cases, negative as expected a priori. Negative own price elasticities were also found in many end product supply functions suggesting a misspecification of the supply relationship. The unexpected supply function results bring up questions about the degree of competitiveness in pulp and paper markets, and thus the validity of using the perfectly competitive market assumption in empirical studies. Finally the model was evaluated in the context of using the results in a spatial equilibrium model of the North American pulp and paper sector.
Forestry, Faculty of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
4

Toivanen, Hannes. "Learning and Corporate Strategy: The Dynamic Evolution of the North American Pulp and Paper Industry, 1860-1960." Diss., Available online, Georgia Institute of Technology, 2004:, 2004. http://etd.gatech.edu/theses/available/etd-04262004-153343/unrestricted/toivanen%5Fhannes%5Fs%5F200408%5Fphd.pdf.

Full text
Abstract:
Thesis (Ph. D.)--School of History, Technology and Society, Georgia Institute of Technology, 2005. Directed by Steve Usselman.
Usselman, Steve, Committee Chair ; Giebelhaus, August, Committee Member ; Krige, John, Committee Member ; Winders, William, Committee Member ; Graham, Stuart, Committee Member. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
5

Bjarnhagen, Rikard. "Service Enhancer Tool : Design of a new Service Enhance Tool for Metso refiners." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-79533.

Full text
Abstract:
Metso develops (among many other things) refiners. The refiner grinds the wood chips intopulp. The grinding is done by segments that are placed on a rotor inside the refiner hosing.In time this segments wear and needs to be replaced.When changing refiner segments or performing service to the refiner the rotor needs to berotated. To perform the rotating motion today the overhead crane is used. This procedure isboth impractical, dangerous and takes precious time from the overhead crane. Because ofthis Metso wanted to create a new way to rotate the rotor.The aim of this thesis is to create a tool or equipment which can be used to rotate therefiner rotor and can be installed as an upgrade on all Metso refiner models.The proposed design is driven with a 1.1 kW electrical motor and a gearbox with a gear ratioof approximately 1:217. The torque is transferred from the outgoing gearbox shaft to therefiner shaft with the help of gearwheels. To connect the gearbox gearwheel with the refinershaft gearwheel, the gear motor has to be moveable in a radial direction. This is done by themeans of two shafts that glides in four bushings. On the gearbox shaft a gearwheel with 120mm of face width is mounted. The large face width is used to take up the axial movement ofthe refiner shaft.The proposed concept fulfills all of the demands set in the pilot study. The design is goodbecause of the low cost and straight forward design that is easy to build and simple to use.The disadvantage is that the equipment is a bit large and heavy, but as stationary equipmentthis should not be a problem.
APA, Harvard, Vancouver, ISO, and other styles
6

Damani, Pallavi. "Vertical Integration in American Pulp and Paper Industry, 1970-2000." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/4989.

Full text
Abstract:
The paper and pulp industry saw an increase in the number of mergers in 1980s and 1990s. There had been consolidation of a number of smaller companies into larger corporations, which have greater management, financial, and marketing power. This merging trend has resulted in a fewer number of firms and an increasing concentration in the industry. Although the number of firms has decreased, the total industry capacity has been increasing. The combination of these interesting factors has motivated the topic of this masters thesis. The primary purpose of this research is to explore the factors that positively influence a firms decision to vertically integrate into producing its own pulp.
APA, Harvard, Vancouver, ISO, and other styles
7

Gong, Yanyan. "Pulp and paper industry emissions and non-Hodgkin's lymphoma risk." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0009/MQ52904.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cruz-Novoa, Alfonso. "Industrial dynamics and technological structure of the paper and pulp industry." Thesis, University of Sussex, 2011. http://sro.sussex.ac.uk/id/eprint/7604/.

Full text
Abstract:
This thesis investigates the existence and form of association between the technological structure of one of the most highly capital-intensive industries in the world, the paper and pulp (p&p) industry, and its dynamic behaviour in terms of market growth and development. Industrial structure issues are particularly relevant in highly capital-intensive sectors because they reflect the influence of economies of scale and changing patterns of entry and exit. The thesis draws upon two related bodies of literature: the dynamics of industrial structure, and heterogeneity within industry. It uses a quantitative hypothesis-deductive method and two panel databases. The first of these databases identifies key characteristics of the world's 150 largest p&p firms during the period 1978-2000, accounting for two-thirds of world output. The second dataset contains annual production capacity for the entire population of US p&p companies during the period 1970-2000. The US is the largest producer and consumer of p&p, accounting for one-third of world output. The main findings are as follows. Firstly, we demonstrate that p&p firms' growth is not a 'random walk' process, a generalization referred to in the literature as Gibrat's law. Nor is there a linear relation between growth and size distribution or between time and growth rates. We find that size, technology and time matter. Secondly, we demonstrate that this departure from Gibrat's law is due to the existence of three distinctive technological configurations or strategic groups of firms: 'Large & Diversified', 'Medium & Specialized', and 'Small & Very Specialized', which show persistently heterogeneous growth performance. In contrast with the findings in most of the recent empirical literature that shows smaller firms growing faster within the industry size distribution, the medium & specialized p&p companies show systematically the highest rates of growth. Thirdly, patterns of p&p firm survival and technological adoption behaviour over the last three decades are identified and related to the principal technological advances during the period, i.e. the very rapid increase in paper machine operating speed. The research contributes to the literature by providing robust new empirical evidence of the persistence over time of an intra-industry technological structure that systematically influences the heterogeneous performance of firms with different technological configurations and whose origins are linked to firms' growth processes (industrial dynamics) in the p&p industry.
APA, Harvard, Vancouver, ISO, and other styles
9

Bhinge, Deepak. "Color removal from pulp and paper wastes by coagulation." Thesis, Virginia Tech, 1986. http://hdl.handle.net/10919/41569.

Full text
Abstract:

Coagulation studies were conducted to determine an appropriate treatment approach to remove color and organic carbon from the pulp and paper wastes from the Union Camp Corporation, Franklin, Va.

Based on a preliminary analysis of the data collected during this research, either alum or ferric chloride may be used to remove color from pulp and paper wastes. An effluent with final residual color less than 5 color units can be generated using PAC treatment after flocculating certain waste streams with alum or ferric chloride. Higher molecular weight organics (above 5K mass units) showed a near complete removal by coagulation.

It is expected that alum coagulation would involve a lesser cost in pH adjustment as compared to ferric chloride coagulation. Alum sludge dewatered and thickened more rapidly than the iron sludge; however, after mechanical dewatering, the alum cake had a slightly greater moisture content than the sludge produced after ferric chloride coagulation.


Master of Science
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Gewei. "Does market concentration motivate pulp and paper mills to vertically integrate?" Thesis, Available online, Georgia Institute of Technology, 2005, 2005. http://etd.gatech.edu/theses/available/etd-08242005-143103/.

Full text
Abstract:
Thesis (M. S.)--Economics, Georgia Institute of Technology, 2006.
Haizheng Li, Committee Chair ; Patrick McCarthy, Committee Member ; Vivek Ghosal, Committee Member. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Pulp and paper industry"

1

Bowne, Thomas R., Sarah R. Sphar, and Robert D. Gilchrist. Pulp & paper. Cleveland: Freedonia Group, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kennedy, Jae, and Paul Bailin. Pulp & paper. Cleveland, Ohio: Freedonia Group, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lavigne, John R. Pulp & paper dictionary. San Francisco, Calif., USA: Miller Freeman Publications, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pulp & paper dictionary. San Francisco: Miller Freeman Books, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Innes, George L. Pulp and paper chemicals. Norwalk, CT: Business Communications Co., 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Commission, Australia Industries Assistance. Pulp, paper, paper products and printing industries. Canberra: Government Printer, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ita, Paul A., Mia Zaper, and Aaron Hackle. World pulp & paper chemicals. Cleveland: Freedonia Group, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

CII-Sohrabji, Godrej Green Business Centre (Hyderabad India). National best practices manual, pulp & paper industry: "making Indian pulp & paper industry world class.". Hyderabad: Confederation of Indian Industry, CII-Sohrabji Godrej Green Business Centre, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Joint Textbook Committee of the Paper Industry. Pulp and paper manufacture. Edited by Kocurek M. J, Hamilton Frank, and Leopold Bengt. 3rd ed. Atlanta: TAPPI, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Industry, Joint Textbook Committee of the Paper. Pulp and paper manufacture. 3rd ed. Atlanta: TAPPI, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Pulp and paper industry"

1

Bajpai, Pratima. "Paper and Paperboard Industry." In Pulp and Paper Industry, 13–24. Elsevier, 2015. http://dx.doi.org/10.1016/b978-0-12-803408-8.00002-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bajpai, Pratima. "The Pulp and Paper Industry." In Pulp and Paper Industry, 9–29. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-12-811099-7.00002-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bajpai, Pratima. "Paper Machine Loops and Papermaking." In Pulp and Paper Industry, 13–20. Elsevier, 2015. http://dx.doi.org/10.1016/b978-0-12-803409-5.00002-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bajpai, Pratima. "Chemistry of Deposits on Paper Machines." In Pulp and Paper Industry, 77–85. Elsevier, 2015. http://dx.doi.org/10.1016/b978-0-12-803409-5.00006-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bajpai, Pratima. "Major Pulp and Paper Chemical/Enzyme Suppliers." In Pulp and Paper Industry, 295–314. Elsevier, 2015. http://dx.doi.org/10.1016/b978-0-12-803408-8.00005-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bajpai, Pratima. "Global Pulp and Paper Production and Consumption." In Pulp and Paper Industry, 9–14. Elsevier, 2016. http://dx.doi.org/10.1016/b978-0-12-803411-8.00002-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Front-matter." In Pulp and Paper Industry, i—iii. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-12-811103-1.00013-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bajpai, Pratima. "Introduction." In Pulp and Paper Industry, 1–8. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-12-811099-7.00001-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bajpai, Pratima. "Best Available Techniques." In Pulp and Paper Industry, 31–35. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-12-811099-7.00003-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bajpai, Pratima. "Water Usage in the Pulp and Paper Processes." In Pulp and Paper Industry, 37–53. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-12-811099-7.00004-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pulp and paper industry"

1

"Industry applications society - Pulp & Paper industry committee." In Conference Record of 2004 Annual Pulp and Paper Industry Technical Conference. IEEE, 2004. http://dx.doi.org/10.1109/papcon.2004.1338346.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"2021 IAS Pulp and Paper Industry Conference Paper Status." In 2021 IEEE IAS Pulp and Paper Industry Conference (PPIC). IEEE, 2021. http://dx.doi.org/10.1109/ppic47846.2021.9620505.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"IEEE Pulp and Paper Industry Technical Conference." In Conference Record of 2004 Annual Pulp and Paper Industry Technical Conference. IEEE, 2004. http://dx.doi.org/10.1109/papcon.2004.1338352.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Proceedings of IEEE Pulp and Paper Industry Conference." In Proceedings of IEEE Pulp and Paper Industry Conference. IEEE, 1994. http://dx.doi.org/10.1109/papcon.1994.324485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rutherford, N. R. "Electrical engineering-pulp and paper bibliography 1977-89." In Annual Technical Conference on Pulp and Paper Industry. IEEE, 1990. http://dx.doi.org/10.1109/papcon.1990.109879.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Honaker, Darren, and Walter V. Jones. "Paper Machine Dryer section tuning." In 2013 59th IEEE Pulp and Paper Industry Conference - PPIC. IEEE, 2013. http://dx.doi.org/10.1109/ppic.2013.6656060.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bergmann, Michael. "Industry 4.0 Solutions for Pulp and Paper Industries." In 2019 15th International Conference on Telecommunications (ConTEL). IEEE, 2019. http://dx.doi.org/10.1109/contel.2019.8848502.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Piirainen, Raili A. "Fiber Length Measurement In Pulp And Paper Industry." In 1986 Quebec Symposium, edited by Paolo G. Cielo. SPIE, 1986. http://dx.doi.org/10.1117/12.938813.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hartmann, Wayne. "Improving pulp and paper plant MV transformer protection." In 2015 61st IEEE Pulp and Paper Industry Conference - PPIC. IEEE, 2015. http://dx.doi.org/10.1109/ppic.2015.7165856.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Foreword - 2004 Annual Pulp & Paper Conference." In Conference Record of 2004 Annual Pulp and Paper Industry Technical Conference. IEEE, 2004. http://dx.doi.org/10.1109/papcon.2004.1338344.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Pulp and paper industry"

1

none,. Pulp and Paper Industry Energy Bandwidth Study. Office of Scientific and Technical Information (OSTI), August 2006. http://dx.doi.org/10.2172/1218635.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schumacher, Katja. India's pulp and paper industry: Productivity and energy efficiency. Office of Scientific and Technical Information (OSTI), July 1999. http://dx.doi.org/10.2172/753015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Angelini, P. Materials needs and opportunities in the pulp and paper industry. Office of Scientific and Technical Information (OSTI), August 1995. http://dx.doi.org/10.2172/130598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Allen, J. D., S. R. Charagundla, A. Macek, H. G. Semerjian, and J. R. Whetstone. Advanced sensor development program for the pulp and paper industry. Office of Scientific and Technical Information (OSTI), October 1990. http://dx.doi.org/10.2172/6112248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Miller, Melanie, Mauricio Justiniano, and Shawna McQueen. Energy and Environmental Profile of the U.S. Pulp and Paper Industry. Office of Scientific and Technical Information (OSTI), December 2005. http://dx.doi.org/10.2172/1218634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kong, Lingbo, Ali Hasanbeigi, Lynn Price, and Huanbin Liu. Analysis of Energy-Efficiency Opportunities for the Pulp and Paper Industry in China. Office of Scientific and Technical Information (OSTI), January 2013. http://dx.doi.org/10.2172/1172119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Francis, D. W., M. T. Towers, and T. C. Browne. Energy cost reduction in the pulp and paper industry - an energy benchmarking perspective. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2004. http://dx.doi.org/10.4095/321065.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kong, Lingbo, Ali Hasanbeigi, and Lynn Price. Emerging Energy-Efficiency and Greenhouse Gas Mitigation Technologies for the Pulp and Paper Industry. Office of Scientific and Technical Information (OSTI), November 2012. http://dx.doi.org/10.2172/1172694.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eric D. Larson, Stefano Consonni, Ryan E. Katofsky, Kristiina Iisa, and W. James Frederick. A Cost-Benefit Assessment of Gasification-Based Biorefining in the Kraft Pulp and Paper Industry. Office of Scientific and Technical Information (OSTI), March 2007. http://dx.doi.org/10.2172/912520.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Keiser, J. R., S. J. Pawel, R. W. Swindeman, and H. F. Longmire. Section 2: Corrosion and failure analysis studies in support of the pulp and paper industry. Office of Scientific and Technical Information (OSTI), April 1997. http://dx.doi.org/10.2172/494109.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pulp and paper industry' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography