Relevant bibliographies by topics / Pulse-plasma processing

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Pulse-plasma processing'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pulse-plasma processing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pulse-plasma processing"

1

Vincent, T. L., and L. L. Raja. "Optimal Pulse Shaping for Plasma Processing." IEEE Transactions on Control Systems Technology 12, no. 1 (2004): 75–86. http://dx.doi.org/10.1109/tcst.2003.821961.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ciupiński, Łukas, D. Siemiaszko, Marcin Rosiński, Andrzej Michalski, and Krzysztof Jan Kurzydlowski. "Heat Sink Materials Processing by Pulse Plasma Sintering." Advanced Materials Research 59 (December 2008): 120–24. http://dx.doi.org/10.4028/www.scientific.net/amr.59.120.

Full text
Abstract:
A Pulse Plasma Sintering (PPS) process was employed to manufacture Cu-diamond composites with a 50% volume fraction of each constituent. Pure and Cr (0.8wt.%) alloyed copper matrices were used and commercial diamond powders. The composites were sintered at temperature of 900°C for 20 min and under pressure of 60 MPa. In these sintering conditions diamond becomes thermodynamically unstable. Cu0.8Cr-diamond and Cu-diamond composites with relative densities of 99,7% and 96% respectively were obtained. The thermal conductivity of Cu0.8Cr-diamond composite is equal to 640 W(mK)-1 whereas that of Cu
APA, Harvard, Vancouver, ISO, and other styles
3

Cho, Chulhee, Kwangho You, Sijun Kim, Youngseok Lee, Jangjae Lee, and Shinjae You. "Characterization of SiO2 Etching Profiles in Pulse-Modulated Capacitively Coupled Plasmas." Materials 14, no. 17 (2021): 5036. http://dx.doi.org/10.3390/ma14175036.

Full text
Abstract:
Although pulse-modulated plasma has overcome various problems encountered during the development of the high aspect ratio contact hole etching process, there is still a lack of understanding in terms of precisely how the pulse-modulated plasma solves the issues. In this research, to gain insight into previously observed phenomena, SiO2 etching characteristics were investigated under various pulsed plasma conditions and analyzed through plasma diagnostics. Specifically, the disappearance of micro-trenching from the use of pulse-modulated plasma is analyzed via self-bias, and the phenomenon that
APA, Harvard, Vancouver, ISO, and other styles
4

Holland, Julian, Rudolf Weber, Marc Sailer, and Thomas Graf. "Influence of Pulse Duration on X-ray Emission during Industrial Ultrafast Laser Processing." Materials 15, no. 6 (2022): 2257. http://dx.doi.org/10.3390/ma15062257.

Full text
Abstract:
Soft X-ray emissions during the processing of industrial materials with ultrafast lasers are of major interest, especially against the background of legal regulations. Potentially hazardous soft X-rays, with photon energies of >5 keV, originate from the fraction of hot electrons in plasma, the temperature of which depends on laser irradiance. The interaction of a laser with the plasma intensifies with growing plasma expansion during the laser pulse, and the fraction of hot electrons is therefore enhanced with increasing pulse duration. Hence, pulse duration is one of the dominant laser para
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Xiaoxu, Xianlong Ni, Osamu Konda, Hiroko Furuhashi, Satoru Maegawa, and Fumihiro Itoigawa. "Clarification of the Mechanism of Pulse Laser Grinding of Nanosecond Lasers Using High-Speed Camera Imaging." Machines 10, no. 3 (2022): 196. http://dx.doi.org/10.3390/machines10030196.

Full text
Abstract:
Pulse laser grinding (PLG), as a cutting tool processing method, can not only achieve edge sharpening with high precision, but it can also produce surface modification. For example, polycrystalline cubic boron nitride (PCBN) tools processed by PLG can show increased hardness due to the reduction in defects. However, the mechanism of edge formation under PLG processing remains unclear. In this study, by observing the plasma generated during processing using a high-speed camera, the elementary process for each laser pulse of the PLG process was visualized. The plasma luminescence moved successiv
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Chengde, S. R. Vatsya, and S. K. Nikumb. "Effect of plasma on ultrashort pulse laser material processing." Journal of Laser Applications 19, no. 1 (2007): 26–31. http://dx.doi.org/10.2351/1.2402521.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ishigaki, Takamasa, and Tadahiro Sakuta. "Pulse-Modulated RF Thermal Plasma for Advanced Materials Processing." Journal of Intelligent Material Systems and Structures 10, no. 7 (1999): 565–68. http://dx.doi.org/10.1106/4jnk-f951-uq6f-vwer.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wen, Fuh Liang, Yu Lin Lo, C. H. Lin, and Shann Chyi Mou. "A Pulse DC Plasma Deposited Resistor Process." Materials Science Forum 505-507 (January 2006): 865–70. http://dx.doi.org/10.4028/www.scientific.net/msf.505-507.865.

Full text
Abstract:
The pulse DC plasma system offers so highly instant power to generate extremely intense plasma density that its applications are widely extended. In this work, the development of pulse DC plasma processing is studied for the sheet resistors, and the manufacturing mechanism relative to the properties of copper particles deposited on plastic materials is discussed by using atomic force microscopy and line-resistance measured technique.
APA, Harvard, Vancouver, ISO, and other styles
9

Fan, C. H., J. Sun, and J. P. Longtin. "Plasma Absorption of Femtosecond Laser Pulses in Dielectrics." Journal of Heat Transfer 124, no. 2 (2001): 275–83. http://dx.doi.org/10.1115/1.1445135.

Full text
Abstract:
Dielectric (high bandgap) materials represent an important and diverse class of materials in micro and nanotechnology, including MEMS devices, biomedical and bioengineering systems, multilayer thin film coatings, fiber optics, etc. Micromachining dielectrics using ultrafast lasers is an exciting and promising new research area with many significant advantages, including precision material removal, negligible heating of the workpiece, micron and sub-micron-size feature fabrication, and high aspect ratio features. During ultrafast laser processing of dielectrics, the intense laser pulse ionizes
APA, Harvard, Vancouver, ISO, and other styles
10

Chun, S. Y. "Metal Plasma Source Ion Implantation Using a Pulsed Cathodic Arc." Materials Science Forum 534-536 (January 2007): 1397–400. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.1397.

Full text
Abstract:
Combining nano-designed plasma source ion implantation and deposition (PSII&D) method has been developed with the pulsed cathodic arc plasma to make a processing system suitable for surface modification of materials such as metals, plastics and ceramics. By controlling the arc plasma pulse and the target pulse, the surface modification can be changed from plasma deposition to ion implantation. Various versions of applying high-voltage pulse bias are described and compared with other methods. Microstructural changes of the nanometered gold films with/without a high voltage bias, concentrati
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pulse-plasma processing"

1

Hugon, Robert. "Diagnostics d'un plasma pulse d'azote pour l'étude de sa réactivité : comparaison des résultats expérimentaux avec un modèle numérique." Nancy 1, 1994. http://www.theses.fr/1994NAN10427.

Full text
Abstract:
Ce travail est consacré à l'étude de la réactivité d'un plasma pulse d'azote utilisé pour la nitruration des aciers. L'interprétation des mécanismes se produisant dans le plasma lui-même, et plus spécialement pendant la phase de post-décharge, nécessite un diagnostic finement résolu dans le temps. Pour les sondes électrostatiques, un dispositif automatique performant a été réalisé et permet la détermination expérimentale de la fonction de distribution en énergie des électrons et le suivi de son évolution sur un pulse plasma. La spectroscopie optique d'émission consiste en l'observation des ban
APA, Harvard, Vancouver, ISO, and other styles
2

Куцомеля, Юлія Юріївна, Юлия Юрьевна Куцомеля, Yuliia Yuriivna Kutsomelia, О. П. Чейлях та А. С. Сіухін. "Елементний склад і морфологія поверхні покриття, отриманого методом імпульсно-плазмової обробки". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66598.

Full text
Abstract:
Можливість використання електродів з різних матеріалів та відносна простота отримання покриття метолом імпульсно-плазмової обробки (ІПО) є неабиякою перевагою розробленого способу. Установити залежність утворених розмірів шару і структури від режимів ІПО і матеріалу підкладки, що служить основою для створення нових покриттів в конструкційних сталях дозволяють дослідження структурно змінених шарів.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Pulse-plasma processing"

1

Pacific Rim Conference on Ceramic and Glass Technology (6th 2005 Kapalua, Hawaii). Pulse electric current synthesis and processing of materials. Edited by Zuhair A. Munir and International Symposium on Spark Plasma Synthesis and Processing (5th : 2005 : Kapalua, Hawaii). American Ceramic Society, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pacific Rim Conference on Ceramic and Glass Technology (6th 2005 Kapalua, Hawaii). Pulse electric current synthesis and processing materials: Proceedings of the 6th Pacific Rim Conference on Ceramics and Glass Technology (PacRim6), September 11-16, Maui, Hawaii. John Wiley & Sons, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Pulse-plasma processing"

1

Ciupiński, Łukas, D. Siemiaszko, M. Rosiński, A. Michalski, and Krzysztof J. Kurzydłowski. "Heat Sink Materials Processing by Pulse Plasma Sintering." In Advanced Materials Research. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908454-01-8.120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ramireddy, Lokeswari, and Mahendran Radhakrishnan. "Cold plasma applications on pulse processing." In Pulse Foods. Elsevier, 2021. http://dx.doi.org/10.1016/b978-0-12-818184-3.00012-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yu., A., and S. V. "Diagnostics of a Crater Growth and Plasma Jet Evolution on Laser Pulse Materials Processing." In Laser Pulses - Theory, Technology, and Applications. InTech, 2012. http://dx.doi.org/10.5772/48703.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pulse-plasma processing"

1

Rutberg, Philip G., V. A. Kolikov, and A. A. Bogomaz. "PULSE PLASMA GENERATORS, POSSIBLE APPLICATIONS." In Progress in Plasma Processing of Materials, 1997. Begellhouse, 2023. http://dx.doi.org/10.1615/itppc-1996.490.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vincent, T. L., and L. L. Raja. "Theory of optimal pulse shaping for plasma processing." In Proceedings of 2002 American Control Conference. IEEE, 2002. http://dx.doi.org/10.1109/acc.2002.1025479.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kolikov, V. A., A. A. Bogomaz, A. V. Budin, A. F. Savvateev, and Philip G. Rutberg. "SOME ASPECTS OF PULSE PLASMA GENERATORS INVESTIGATION AND THEIR APPLICATION." In Progress in Plasma Processing of Materials, 1999. Begellhouse, 2023. http://dx.doi.org/10.1615/itppc-1998.170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rutberg, Ph G., V. A. Kolikov, B. M. Laskin, A. A. Safronov, and I. S. Polovtsev. "Pulse and Power Three-Phase Plasma Generators, Possible Applications." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0172.

Full text
Abstract:
Abstract The existence of plasma generators with the ability to fit the requirements of different technological processes appears to be the basic point for the introduction of modern plasma systems. The use of plasma heat is one of the most promising areas for development in the chemical industry. Considerable intensification of chemical processes allows for reduction of the reaction area and processing time These factors allow creation of reactors with small overall dimensions, higher capacity and with more attractive economic characteristics.
APA, Harvard, Vancouver, ISO, and other styles
5

Gasmi, Taieb. "A compact plasma pre-ionized TEA–CO2 laser pulse clipper for material processing." In Pacific Rim Laser Damage 2017: Optical Materials for High Power Lasers, edited by Jianda Shao, Takahisa Jitsuno, and Wolfgang Rudolph. SPIE, 2017. http://dx.doi.org/10.1117/12.2269987.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Terashima, Prof Chiaki. "Synthesis of Functional Materials by In-Liquid Plasma Processing." In 7th World Conference on Advanced Materials, Nanoscience and Nanotechnology and 7th World Conference on Chemistry and Chemical Engineering. Eurasia Conferences, 2024. https://doi.org/10.62422/978-81-981590-9-0-003.

Full text
Abstract:
A non-equilibrium plasma, characterized by a significant disparity between electron temperature and ion temperature, offers an enticing environment for various reactions. This unique setting holds the potential to facilitate low-temperature processes in material synthesis and other applications. Particularly noteworthy is the generation of plasma in liquid, which enables reactions to occur at temperatures below the liquid's boiling point, creating a distinctive and promising reaction milieu. We set-up two different cold plasmas: one is a so-called solution plasma using a bipolar pulse power su
APA, Harvard, Vancouver, ISO, and other styles
7

Promislow, C., and J. Little. "A Boost Converter-Based Power Processing Unit For High Pulse Rate Inductive Pulsed Plasma Thrusters." In 2022 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2022. http://dx.doi.org/10.1109/icops45751.2022.9813109.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Choi, Taeyoul, David Jen Hwang, and Costas P. Grigoropoulos. "Investigation of Air Plasma in Ultra-Short Laser Processing of Crystalline Silicon." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/htd-24345.

Full text
Abstract:
Abstract Ultra-short pulsed laser radiation has been shown to be effective for precision material processing and surface micro-modification. One of the advantages is the substantial reduction of the heat penetration depth, which can lead to minimal lateral damage. On the other hand, the peak laser power applied in this experiment is sufficiently high to induce air breakdown forming air plasma. The femtosecond-resolved imaging pump-and-probe experiments provide a distinct evidence for the occurrence of air plasma. This highly nonlinear phenomenon is triggered before the commencement of the abla
APA, Harvard, Vancouver, ISO, and other styles
9

RADEK, N. "Laser Processing of WC-Co Coatings." In Terotechnology XII. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644902059-6.

Full text
Abstract:
Abstract. The main objective of the present work was to determine the influence of laser beam processing (LBP) on the microstructure, microhardness, roughness, and corrosion resistance of coatings produced on C45 carbon steel by the electro-spark deposition (ESD) process. The studies were conducted using WC-Co electrodes produced by the Pulse Plasma Sintering method (PPS) of nanostructural powders. The coatings were deposited by means of the EIL-8A and they were laser treated with the Nd:YAG, BLS 720 model.
APA, Harvard, Vancouver, ISO, and other styles
10

Deng, G., M. H. Gordon, L. A. Roe, A. P. Malshe, and W. F. Schmidt. "Comparison of Laser-Ceramic and Laser-Metal Material Processing." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1553.

Full text
Abstract:
Abstract In an effort to better understand and thereby utilize laser processing, an existing code describing laser-metal (aluminum) interaction is modified to describe laser-ceramic (diamond) interaction. Comparisons between our modified code (diamond target) and the original code (aluminum target) highlight similarities and differences between laser-ceramic and laser-metal processing. Gas breakdown effects, which are expected for the simulated short (time duration), high energy laser pulses, are observed in both codes. Due to the lower sublimation heat of aluminum (1.1×104J/g) compared to dia
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pulse-plasma processing' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography