Relevant bibliographies by topics / Pump components

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Pump components'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pump components.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pump components"

1

Liu, De Hui, Li Wen Liu, Gang Tang, Hong Min Wen, and Quan Guo Lu. "A Design and Research on GMM Precision Flow Pump." Applied Mechanics and Materials 602-605 (August 2014): 117–21. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.117.

Full text
Abstract:
A new type of the precision flow pump is developed with the giant magnetostrictive materials as the driving source. Experiment has been conducted to test the performance of the pump with designed key components. The pump as the preloading mechanism, adopting an elastomer instead of a spring, not only simplifies the structure, but also improves the performance of the pump. A design is also made to some key components such as the giant magnetostrictive rod and driving coil. The result of experiment shows that the pump flow resolution records 1 ml/min~400ml/min and the maximum output pressure 0.6
APA, Harvard, Vancouver, ISO, and other styles
2

Rifai, Moh Sahal, Nanang Ruhyat, and Arief Surachman. "Performance Analysis of Centrifugal Pumps Before and After Wear Ring Restoration." International Journal of Innovation in Mechanical Engineering and Advanced Materials 7, no. 1 (2025): 43. https://doi.org/10.22441/ijimeam.v7i1.30324.

Full text
Abstract:
A pump is a mechanical device used to move fluids from a lower elevation to a higher one. In general, pumps are classified into two types: positive displacement pumps and non-positive displacement pumps. Centrifugal pumps fall into the latter category and operate by converting mechanical energy into kinetic energy to transport fluids. A centrifugal pump consists of several key components, including the casing, shaft, bearing, coupling, and impeller. In the case of closed impeller-type centrifugal pumps, wear rings (wearing components) are installed to provide a clearance between the impeller a
APA, Harvard, Vancouver, ISO, and other styles
3

Rylski, Adam, and Krzysztof Siczek. "Study on the Operating Conditions of Micropump Components." Advanced Materials Research 1051 (October 2014): 813–18. http://dx.doi.org/10.4028/www.scientific.net/amr.1051.813.

Full text
Abstract:
The micropumps driven by AC, DC brush, DC brushless or stepper motors can be used in pharmaceutical industry. The particular property of such pumps is magnet coupling between motor and pump. The aim of the analysis has been to investigate the operating conditions for bearing in such pump during flow of water, oil and glycerin – water solution and to investigate the dependency of the glycerin – water solution flow upon the outlet – inlet pressure difference and upon the speed of motor driving pump. It has been also investigated the possibility of application for NdFeB – NdFeB magnet assembly in
APA, Harvard, Vancouver, ISO, and other styles
4

Hong, Shunjun, and Xiaozhou Hu. "Study on the Non-Steady-State Wear Characteristics and Test of the Flow Passage Components of Deep-Sea Mining Pumps." Applied Sciences 12, no. 2 (2022): 782. http://dx.doi.org/10.3390/app12020782.

Full text
Abstract:
In the process of conveying coarse-grained minerals, the internal flow-through passage components of mining pumps are subject to wear. The flow of coarse particles in such pumps is complex and changes constantly, making it necessary to study the non-steady-state wear characteristics and test the flow passage components. The evolution of the surface wear rate for the flow passage components during one third of a rotation cycle (120°) of a mining pump impeller with small, design, and large flow rates was analyzed in this study based on a discrete phase model (DPM). The flow that occurs during an
APA, Harvard, Vancouver, ISO, and other styles
5

Hong, Shunjun, and Xiaozhou Hu. "Experimental Study and Analysis on Wear Characteristics of Mining Pumps Transporting Solid-Liquid Two-Phase Flows." Applied Sciences 14, no. 13 (2024): 5634. http://dx.doi.org/10.3390/app14135634.

Full text
Abstract:
The use of mining pumps to transport solid-liquid two-phase flows results in solid particles causing varying degrees of wear in the flow-passing components of the pump. In this study, a computational fluid dynamics analysis was performed employing SST k-ω turbulence and discrete phase models to predict the wear characteristics of small two-stage mining pumps. The wear rates of the flow-passing components (first- and second-stage impellers and guide vanes) of the pump were simulated considering three solid-particle sizes under three flow conditions (low flow, rated flow, and high flow), with th
APA, Harvard, Vancouver, ISO, and other styles
6

Majdan, Radoslav, Zdenko Tkáč, Rudolf Abrahám, Bohuslav Stančík, Milena Kureková, and Radoslav Paulenka. "Effect of Ecological Oils on the Quality of Materials of Hydraulic Pump Components." Advanced Materials Research 801 (September 2013): 1–6. http://dx.doi.org/10.4028/www.scientific.net/amr.801.1.

Full text
Abstract:
This paper presents the effect of three oil types on the quality of hydraulic pumps after testing on a special test bench. The quality of material of hydraulic pump components was evaluated on the basis of its wear. In the special test bench, hydraulic pumps were loaded by cyclic pressure with different oil types. There were tested a mineral oil-based liquid HV and two biodegradable types, i.e. a vegetable oil-based liquid HETG and polyalphaolefin oil-based liquid HEPR. The wear level of hydraulic pumps was evaluated on the basis of flow efficiency and the weight and roughness of internal comp
APA, Harvard, Vancouver, ISO, and other styles
7

Alhamidiy, Abdillah Nur, Ali Masduqi, Bustami Bustami, and Bagas Wahyu Adhi. "STUDI OPTIMASI POMPA DISTRIBUSI SPAM KOTA PALANGKA RAYA UNTUK EFISIENSI ENERGI." Jurnal Teknik Sipil Giratory UPGRIS 1, no. 1 (2024): 47–55. http://dx.doi.org/10.26877/giratory.v1i1.19460.

Full text
Abstract:
SPAM of Palangka Raya City has a distribution unit which is powered by six pumps but only two pumps are functioning due to frequent damage to the pumps. The pumps that function is Pump III and Pump V. This research aims to evaluate pump efficiency and specific energy consumption (SEC) so that technical recommendations for optimizing existing distribution pumps are known. Pump III is installed with a VSD with a SEC value of 0.14 KWh/m3 with a pump efficiency of 70.41% so it does not require minor or major repairs but requires a new backup pump because it works 24 hours while Pump V has a SEC of
APA, Harvard, Vancouver, ISO, and other styles
8

Zindani, Divya, Apurba Kumar Roy, and Kaushik Kumar. "Vibration Analysis of Mixed Flow Pump Impeller Blade Designed Using Mean Stream Line Method." Applied Mechanics and Materials 852 (September 2016): 476–82. http://dx.doi.org/10.4028/www.scientific.net/amm.852.476.

Full text
Abstract:
Mixed flow pumps applications have been exploited in a large number of diversified fields of engineering. They find applications as an important component in waste water treatment systems, power stations, irrigation systems etc. User requirements make these pumps to work very close to the functioning requirements and therefore under these conditions the vibrations are bound to occur in different moving components of the pump. It would be difficult to analyse the pump vibrations, considering the pump as a single system. Analysing vibrations in different moving components of the pump will not on
APA, Harvard, Vancouver, ISO, and other styles
9

Cunningham, Peter. "Lining pump components with fluoroplastics." World Pumps 2004, no. 458 (2004): 44–47. http://dx.doi.org/10.1016/s0262-1762(04)00397-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

O'Hara, Peter. "Material improvements in pump components." World Pumps 1996, no. 361 (1996): 44–48. http://dx.doi.org/10.1016/s0262-1762(99)81246-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pump components"

1

Cox, Astrid. "Development of Components for a Heat Recycling Shower System." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-13381.

Full text
Abstract:
Given the unstable state of the environment, there is an undeniable need for the development of sustainable technologies. This need affects all areas of everyday life, even the shower. Modern shower systems result in energy waste in the form of heat, which can be minimized through the implementation of a heat exchanger. In cooperation with Consat SES this project developed a system to implement a heat exchanger using an in-shower water transportation pipe. A fitting non-electrical pump and motor were also chosen. To develop these elements a general design methodology of defining the problem, i
APA, Harvard, Vancouver, ISO, and other styles
2

Khosravi, Bakhtiari Hossein. "Developing a dynamic model of ground-source heat pump system to evaluate different components sizes." Thesis, KTH, Tillämpad termodynamik och kylteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-159020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tibbo, Jamie J. "Physical interactions between MexA and MexB, two components of a multidrug efflux pump in Pseudomonas aeruginosa." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape2/PQDD_0021/MQ52955.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Blackman, Corey. "Investigation of the performance of individual sorption components of a novel thermally driven heat pump for solar applications." Thesis, KTH, Tillämpad termodynamik och kylteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-149877.

Full text
Abstract:
An enhanced-modularity thermally driven chemical heat pump was conceptualised as a second generation product for various heating and cooling applications with special emphasis on solar applications. The typical characteristics of the absorption heat pump were studied and the key performance parameters were selected for further investigation. An experimental test rig was constructed to allow for the testing of each component’s performance characteristics with special attention being paid to the ability to interchange components to test various configurations as well as to the facilitation of st
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Menggeng. "Modelling and analysis of pressure pulsations in hydraulic components and systems with particular reference to pump fault diagnosis." Thesis, University of Bath, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.503386.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pecourt, Jean-Marc L. "Femtosecond pump-probe investigation of excited state dynamics in liquids : intramolecular charge transfer in dimethylaminobenzonitrile and ultrafast internal conversion in nucleic acid components /." The Ohio State University, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=osu1488203857248598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Кушніров, Павло Васильович, Павел Васильевич Кушниров, Pavlo Vasylovych Kushnirov та Д. Н. Самардак. "Усовершенствование изготовления и сборки деталей насоса ПЭ75-115". Thesis, Издательство СумГУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/5852.

Full text
Abstract:
Предложена методика контроля остаточного усилия в шпильке при затяжке разъемов секционных насосов. Предложенный метод затяжки обеспечивает точность на порядок выше существующего метода моментной затяжки, который применяется в большинстве насосов. При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/5852
APA, Harvard, Vancouver, ISO, and other styles
8

Robbie, M. J. "Regenerative pumps for aircraft fuel systems." Thesis, Cranfield University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.359572.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ramirez, Carlos. "Meso-machining of miniature space system components." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2007. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

MacLeod, Bradley Keith. "Evaluation of components in solar water heaters with photovoltaic-powered pumps." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/mq39682.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Pump components"

1

United States. National Aeronautics and Space Administration., ed. Hydrodynamic design of generic pump components: Final technical report. Rocketdyne Division of Rockwell International Corp., 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

United States. National Aeronautics and Space Administration., ed. Incompressible viscous flow computations for the pump components and the artificial heart. MCAT Institute, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. National Aeronautics and Space Administration., ed. Incomprehensive viscous flow computations for the pump components and the artificial heart. MCAT Institute, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sherstnev, Nikolay. Maintenance and repair of marine pumps. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1085864.

Full text
Abstract:
The tutorial shows the design features of marine pumps that affect their working conditions and methods of maintenance and repair. Recommendations for external inspection and control of their components and parts are given. The features of disassembly and assembly of various types of pumps are shown. With examples from ship practice, typical defects of pump assemblies and parts, methods of their determination and elimination are considered. It is intended for students of higher educational institutions (specialty in the specialty "Operation of marine power plants") and university teachers. It
APA, Harvard, Vancouver, ISO, and other styles
5

European Committee of Pump Manufacturers., ed. Europump terminology: Pump component names = dénominations des elements constitutifs de pompes = denominanzione degli elementi componenti le pompe = denominación de los componentes de las bombas = Denennungen von Pumpeneinzelteilen. Elsevier Advanced Technology, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Leon, Chang, and Ames Research Center, eds. Computation of incompressible viscous flows through turbopump components. National Aeronautics and Space Administration, Ames Research Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dochan, Kwak, Rogers Stuart E, and Ames Research Center, eds. Computation of incompressible viscous flows through turbopump components. National Aeronautics and Space Administration, Ames Research Center, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bobacka, Veronica. Interactions between cationic starch and components of a peroxide-bleached thermomechanical pulp. Åbo Academy Press, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

G, Hamzehee H., and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research., eds. Component pe[r]formance study: Commercial power reactors. U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Houghton, James R. Component peformance study: Motor-driven pumps, 1987-1998 : commercial power reactors. U.S. Nuclear Regulatory Commission, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Pump components"

1

Fung, Daniel A., Matthew R. Robinson, Hardik P. Parikh, and Timothy Davis. "The Components of Intrathecal Drug Delivery." In Intrathecal Pump Drug Delivery. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86244-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Haller, Michel Y., Erik Bertram, Ralf Dott, et al. "Components and thermodynamic aspects." In Solar and Heat Pump Systems for Residential Buildings. Wilhelm Ernst & Sohn, 2015. http://dx.doi.org/10.1002/9783433604830.ch03.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Qi, Jianjun, Shaojia Chen, Dongfeng Wang, Liqin Wang, and Rui Guo. "Research on Accelerated Degradation Test and Reliability Evaluation Method for Hydraulic Pumps Based on Parallel Energy Saving." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1876-4_42.

Full text
Abstract:
AbstractHydraulic pump is a product with high reliability and long-life, there exist many urgent problems like long test period, high cost and a larger power consumption in the reliability evaluation method of pump. A new kind of reliability test bench is built combined with parallel power-saving design concept, which based on principles of energy saving and power recycle. Multi-pumps reliability accelerated degradation test is achieved by applying step stress on the pump under test. Volumetric efficiency is selected as performance degradation evaluating index, the degradation of whose is much
APA, Harvard, Vancouver, ISO, and other styles
4

Ivanov, Evgeniy, Aleksandr Zharkovskii, Igor Borshchev, and Arsentiy Klyuyev. "Comparison of the Shape of Digital Models of Pump Components." In Proceedings of International Scientific Conference on Telecommunications, Computing and Control. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6632-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Minchao, Yuqiang Cheng, Jia Dai, and Jian Li. "Simulation Analysis of the Starting Process of the Pump-Fed Liquid Rocket Engine." In Performance Analysis of a Liquid/Gel Rocket Engine During Operation. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-6485-3_8.

Full text
Abstract:
AbstractFor the operation of a large pump-fed liquid rocket engine, the most important and critical working process is the starting process of the liquid rocket engine system. The success of starting is directly related to the success or failure of the launch of a space vehicle. During the starting process of a liquid rocket engine, very complex chemical and physical changes occur in the propellant components, and the engine system parameters change rapidly within a large range. Therefore, it is obviously important to conduct an in-depth simulation study on the starting process of a liquid roc
APA, Harvard, Vancouver, ISO, and other styles
6

Tse, Peter W., and Dong Wang. "Extraction of Principal Components from Multiple Statistical Features for Slurry Pump Performance Degradation Assessment." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15536-4_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Young Kim, Geon, Hyoung Jin Lee, and Hwanil Huh. "Components Design of an Experimental System for a Lab-Scaled Electric Pump-Fed Cycle." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2635-8_97.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pelletier-De Koninck, Jean-Christophe, Andreas Athienitis, and Hervé Frank Nouanegue. "Design of Photovoltaic/Thermal Collectors with Thermal Storage and Batteries to Enhance Building Performance and Resilience in Cold Climate." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-57800-7_18.

Full text
Abstract:
AbstractThis study consists of a sensitivity analysis of photovoltaic/thermal (PV/T) collectors, liquid thermal storage, and battery systems applied for the offices of a school building near Montreal, Canada to enhance building performance and resiliency to power outages during winter operation. The analysis was applied for 3 days in January with mixed solar conditions by varying the sizing of each of the components to achieve at least 8 h of self-sufficiency, the average length of power outages. It was found the optimal sizing for the studied system, while minimizing component costs, is to di
APA, Harvard, Vancouver, ISO, and other styles
9

Xiao, Yunfeng, Dehao Zhang, Xingxing Huang, et al. "Stress Characteristics Analysis of Key Stationary Structural Components of Pump-Turbine Units Under Extreme Conditions." In Computational and Experimental Simulations in Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-44947-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Baoqing, Yunyi Guo, Xingzhou Fan, and Shuang Chen. "Performance of a Mechanical Pump-Driven Two-Phase Cooling System for Aircraft Systems." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-8401-1_19.

Full text
Abstract:
AbstractIn order to solve the heat dissipation problem of high heat flux components of military electronic equipment, a mechanical pump-driven two-phase flow cooling system was designed in this paper. The thermal performance of the system was tested experimentally at room temperature, high and low temperature and vibration environment. By means of the experimental data and phenomenon analysis, the system had good heat transfer performance under room temperature, high and low temperature, vibration conditions. Under the condition of acceleration environment, the system liquid storage separator
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pump components"

1

Saithala, Janardhan Rao, Amjad Kharusi, Mohammed Ghafri, et al. "Failure Cases of Super Duplex Stainless Steel Pump Components." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17689.

Full text
Abstract:
Abstract 25 Cr super duplex stainless steel (SDSS) centrifugal pumps have found vast applications in the Oil & Gas industry for produced water injection systems. An important factor in water injection pump material selection is the need to provide adequate corrosion resistance throughout the operating life cycle. Presence of solids and/or other contaminants in the pumped fluid (e.g. traces of solids, water cut percentage, hydrogen sulphide, chlorides, oxygen, and carbon dioxide content) can impact the corrosion resistance of water injection pumps. SDSS material is used in critical pump com
APA, Harvard, Vancouver, ISO, and other styles
2

Bansal, Lalitkumar, Robert Sienkowski, Christopher Neale, Joel Mann, and Jeffrey W. Nicholson. "Large mode area 8+1 to 1 backward pump-signal combiner." In Components and Packaging for Laser Systems XI, edited by Alexei L. Glebov, Ruth Houbertz, and Stefan W. Heinemann. SPIE, 2025. https://doi.org/10.1117/12.3042177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Klein, Oliver, Hans Hoffmeister, and Alexander Glafey. "Corrosion and Erosion Corrosion Wear Resistance of Rotating Components Made from USN S43100 (1.4057) Steel under Controlled Potentials." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10381.

Full text
Abstract:
Abstract Rotating components in pumps are subjected to a high degree of wear when multiphase fluids containing corrosive elements as well as erosive particles are transported. The wear of these components leads to an increasing loss of efficiency and eventually to the failure of the pump. If the pump is to be used as a stand-alone system such as in ultradeep subsea applications in the oil and gas production industry, the wear has to be minimized. In this paper the wear resistance of USN S43100 steel as a rotating test sample with and without erosive particles in standardised formation water wi
APA, Harvard, Vancouver, ISO, and other styles
4

Adams, D. L. "Biocorrosion of Electrical Submersible Pump Components by Sulfate Reducing Bacteria and Other Bacteria." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02445.

Full text
Abstract:
Abstract There is a corrosion phenomenon, Microbiologically Influenced Corrosion (MIC), that has been misunderstood and misdiagnosed in the electrical submersible artificial lift industry for years. MIC can be caused by sulfate reducing bacteria (SRB), as well as, other anaerobic and aerobic bacteria. This phenomenon has been known by some in the industry, but it has been my experience as a Corrosion Chemist/Forensic Engineer that this corrosion phenomenon is not well understood in the “Oil Patch”. Therefore, this phenomenon may be overlooked as a corrosion mechanism. A better understanding of
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Sharon, Vic Chang, and Benson Shen. "System for fabricating all-fiber side-pump combiners with plurality of pumps." In Components and Packaging for Laser Systems X, edited by Alexei L. Glebov and Paul O. Leisher. SPIE, 2024. http://dx.doi.org/10.1117/12.3001978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Williams, Logan T. "Review of Gear Pump Development at NRL." In BATH/ASME 2020 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/fpmc2020-2764.

Full text
Abstract:
Abstract Research into hydraulic quadrupeds at the US Naval Research Laboratory (NRL) has created the demand for in-house development of miniaturized hydraulic components, including pumps. As part of this effort to develop a miniaturized hydraulic powertrain, external gear pumps were examined, designed, and iterated upon to create an efficient pump package with a small form factor (1.5 × 1.6 × 1.8 inches). The evolution of the pump design has touched every component of the pump and has resulted in many practical design guidelines, novel pump components, and improved pump analysis tools. The or
APA, Harvard, Vancouver, ISO, and other styles
7

Makarachi, Peymaan, and Mohammad Pourgol-Mohammad. "Optimization of Failure Rate of Centrifugal Pumps Using Genetic Algorithm." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87633.

Full text
Abstract:
Centrifugal pumps are the most common type of kinetic pumps, and are used most often in applications with moderate to high flow and low head. In order to increase the reliability of the pumps, researches have been conducted on pump design and maintenance approaches in recent years in order to reduce their failure rates. In this article, Genetic Algorithm (GA) is used to find the optimum value for the total failure rate of a centrifugal pump. The total failure rate of the pump is modeled here as a combination of the failure rates of its individual components such as pump seals, shaft, bearings,
APA, Harvard, Vancouver, ISO, and other styles
8

Campbell, Jenna, Paul O. Leisher, Kevin McClune, et al. "High temperature diode pump modules for directed energy." In Components and Packaging for Laser Systems VIII, edited by Alexei L. Glebov and Paul O. Leisher. SPIE, 2022. http://dx.doi.org/10.1117/12.2611186.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Usami, Masashi, Noboru Edagawa, Yuichi Matsushima, et al. "Undersea-Qualified 980 nm Pump Laser Diode Module Evaluated by Massive Life Test." In Wavelength Division Multiplexing Components. OSA, 1999. http://dx.doi.org/10.1364/wdm.1999.168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jin, Yan, Chao Liu, Fangping Tang, Jiren Zhou, and Li Cheng. "Analysis of the Influence of Passage Components on the Efficiency of Bulb Tubular Pumps." In ASME 2008 Fluids Engineering Division Summer Meeting collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/fedsm2008-55234.

Full text
Abstract:
For large discharge and low lift head, it is especially suitable to use tubular pumps for their economic characteristics. Tubular pumps have high efficiency, small hydraulic loss, compact unit structure, simple construction arrangement and low cost both for construction and running. Recently, in the east route of South to North Water Diversion Project in China, there are many low head and large discharge pump stations using tubular pumps. It is important to analyze the flow characteristics and performance of tubular pump. In this paper CFD method is used to simulate the whole flow passage in a
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Pump components"

1

Fyfe, Caroline, Arthur Grimes, Shannon Minehan, and Phoebe Taptiklis. Evaluation of the Warmer Kiwis Homes Programme: Full Report including Cost Benefit Analysis. Motu Economic and Public Policy Research, 2022. http://dx.doi.org/10.29310/wp.2022.14.

Full text
Abstract:
We evaluate the heat pump component of New Zealand’s Warmer Kiwi Homes (WKH) programme. The programme includes provision of heat pumps in living areas for eligible households (based on neighbourhood or income) that do not have suitable heating. It also includes installation of retrofitted insulation for houses with insufficient insulation. Staggered installation enables difference-in-difference estimates of impacts. Heat pump outcomes on which we focus include warmth and dryness of the living area, personal comfort and wellbeing, and electricity consumption. We combine the heat pump findings w
APA, Harvard, Vancouver, ISO, and other styles
2

Beavers, John, and Gregory Quickel. PR-186-09204-R01 Determining the Effects of Ethanol on Pump Station Facilities. Pipeline Research Council International, Inc. (PRCI), 2010. http://dx.doi.org/10.55274/r0010706.

Full text
Abstract:
The first task in Phase 1 of this project involved sending out an industry survey regarding materials in pump stations. This task was performed to determine what components are important from a facilities point of view and what materials are used in these components. The information from the survey was organized into a table that is attached as an appendix to this report. Additionally, manufacturers of the components were contacted in order to determine the materials present in the components in the pump stations. The requests for bill of materials or materials for specific part numbers were p
APA, Harvard, Vancouver, ISO, and other styles
3

Fyfe, Caroline, Arthur Grimes, Shannon Minehan, and Phoebe Taptiklis. Evaluation of the Warmer Kiwis Homes Programme: Summary Report including Cost Benefit Analysis. Motu Economic and Public Policy Research, 2022. http://dx.doi.org/10.29310/wp.2022.13.

Full text
Abstract:
We evaluate the heat pump component of New Zealand’s Warmer Kiwi Homes (WKH) programme. The programme includes provision of heat pumps in living areas for eligible households (based on neighbourhood or income) that do not have such heating. It also includes installation of retrofitted insulation for houses with insufficient insulation. Staggered installation enables difference-in-difference estimates of impacts. Heat pump outcomes on which we focus include warmth and dryness of the living area, personal comfort and wellbeing, and electricity consumption. We combine the heat pump findings with
APA, Harvard, Vancouver, ISO, and other styles
4

McInerney, Michael K., and Robert Jr B. Mason. Corrosion Control of Central Vehicle Wash Facility Pump Components Using Alternative Alloy Coatings. Defense Technical Information Center, 2016. http://dx.doi.org/10.21236/ad1012948.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Poerner. PR-015-11211-R02 Mechanical Seal Auxiliary Systems Best Practices Summary. Pipeline Research Council International, Inc. (PRCI), 2014. http://dx.doi.org/10.55274/r0010817.

Full text
Abstract:
The primary research objective of this project was to summarize the best practices for design, operation, and maintenance of pump mechanical seal auxiliary systems in a reference document for pipeline pump operators. This was achieved by meeting several secondary objectives outlined below. Define the types of mechanical seals and seal auxiliary systems which are used in pipeline stations Determine the reliability of the auxiliary system components as reported by end-users Outline typical and recommended design, operation, and maintenance practices for seal auxiliary systems Based on reliabilit
APA, Harvard, Vancouver, ISO, and other styles
6

Norfleet, Quickel, and Beavers. PR-186-12204-R02 Guidelines on the Effects of Ethanol on Pump Stations and Terminal Facilities. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010673.

Full text
Abstract:
Ethanol has been used for the last several years as an environmentally friendly alternative to methyl tertbutyl ether (MTBE), which is an oxygenate additive to gasoline, to increase octane levels, and to facilitate the combustion process. However, the need to find alternatives to imported oil and gas has spurred the increased use of ethanol as an alternative fuel source. Further, ethanol is being promoted as a potential trade-off for CO2 emissions from the burning of fossil fuels since CO2 is consumed by the plants used as the ethanol source. Legislation mandates a significant increase in etha
APA, Harvard, Vancouver, ISO, and other styles
7

Poerner. PR-015-11211-R01 Mechanical Seal Auxiliary Systems Guideline. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010789.

Full text
Abstract:
The reliance on centrifugal pumps the world over implies a heavy reliance on mechanical seals. In order to get the highest level of performance from the seals, auxiliary systems are used either to condition the seal operating environment or monitor the systems and detect failures. Current standards already exist that recommend seal auxiliary systems based on certain pump operating conditions, and are widely accepted in the industry both among seal end-users and vendors. And because of their knowledge on the actual seals, the vendors are the primary source for end-users to receive designs and e
APA, Harvard, Vancouver, ISO, and other styles
8

Wilcox. PR-015-09200-R01A Compressor and Pump Station Incidents and Technology Gaps. Pipeline Research Council International, Inc. (PRCI), 2009. http://dx.doi.org/10.55274/r0010956.

Full text
Abstract:
In 2008, Pipeline Research Council International (PRCI) took the initiative to identify the main causes of reportable incidents in compressor and pump stations. Data was gathered from several sources including the United States� Department of Transportation Pipeline and Hazardous Materials Safety Administration, Canada�s National Energy Board, and PRCI member companies. More than 1600 incidents were reviewed over an 18 year period (1990 to 2008). The incidents were evaluated based on their frequency of occurrence and the consequences of the incidents (injury, ignition, environmental impact, et
APA, Harvard, Vancouver, ISO, and other styles
9

Leoni, Paolo, and Gunnar Lennermo. Integration concepts of decentral ST systems in DHC. IEA SHC Task 55, 2020. http://dx.doi.org/10.18777/ieashc-task55-2020-0016.

Full text
Abstract:
This factsheet focuses on the integration hydraulics and control of central ST systems in DHC. The first part gives an overview of decentral feed-in: international state of the art (including comparison and selection criteria of the different integration schemes), hydraulics and components, details of the return-to-supply scheme (challenges, pump operation, control). The second part describes concepts for the secondary-side integration of ST without feed-in. The third part illustrates selected best-practice examples in Austria (Wasserwerke Andritz and Berlinerring in Graz) and Sweden (Ystad).
APA, Harvard, Vancouver, ISO, and other styles
10

Huang, F. H. Miscellaneous component design for Tank 241SY101 pump removal. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/34303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pump components' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography