Relevant bibliographies by topics / Pump energy

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Pump energy'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pump energy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pump energy"

1

Pei, Yingju, Qingyou Liu, and Kim Tiow Ooi. "Research on Energy-Efficient Disc Pumps: A Review on Physical Models and Energy Efficiency." Machines 11, no. 10 (2023): 954. http://dx.doi.org/10.3390/machines11100954.

Full text
Abstract:
Disc pumps have obvious advantages in dealing with difficult-to-pump media. Energy efficiency and sustainable energy management are important topics with regard to reducing costs and promoting carbon neutrality. Though the concept of the disc pump was proposed in the 1850s, development was slow and limited by its initial model. However, with the development of industries such as petrochemicals and food, the efficient pumping of difficult-to-pump media is much needed, but facing challenges. Therefore, research on energy-efficient disc pumps is particularly important moving forward. In this pape
APA, Harvard, Vancouver, ISO, and other styles
2

Sanada, Cassia, and Osmay Oharriz. "Coating Technology for Pump Energy Savings." Materials Performance 56, no. 12 (2017): 40–44. https://doi.org/10.5006/mp2017_56_12-40.

Full text
Abstract:
Pumps are essential to the daily operation of water and wastewater treatment plants. Premature failures of pump components can be caused by cavitation phenomena, erosion-corrosion, and other mechanisms. Rough and pitted surfaces increase friction, reduce pump efficiency, and lead to considerable operating costs. While conventional solutions cannot properly address the problems, modern coating technologies have proven to effectively protect pumps against erosion-corrosion while improving pumping efficiency.
APA, Harvard, Vancouver, ISO, and other styles
3

Rogovyi, Andrii, Mariia Kostiuk, and Andrii Azarov. "IMPROVING ENERGY PARAMETERS OF OIL JET PUMPS." Bulletin of the National Technical University "KhPI". Series: Hydraulic machines and hydraulic units, no. 1 (November 14, 2022): 25–32. http://dx.doi.org/10.20998/2411-3441.2022.1.04.

Full text
Abstract:
The difficulty of extracting oil from great depths due to the huge amounts of sand, water and other impurities has led to the fact that well jet oil pumps are becoming more common. Their use in oil production is facilitated by such factors as practical insensitivity to the content of gas and other impurities dissolved in oil compared to other types of pumps; simplicity of design and the absence of moving parts, which is inherent in all jet technology. The reliability and durability of jet pumps are an order of magnitude higher than those of any other pumps used in oil and gas production. Obtai
APA, Harvard, Vancouver, ISO, and other styles
4

Ali-Hikmat Ahmadov, Ali-Hikmat Ahmadov, and Musayev Anar Musayev Anar. "INVESTIGATION OF THE ENERGY CHARACTERISTICS OF CENTRIFUGAL PUMPS." ETM - Equipment, Technologies, Materials 14, no. 02 (2023): 77–83. http://dx.doi.org/10.36962/etm14022023-77.

Full text
Abstract:
A hydraulic device that is used to suck up liquid, move it under pressure or pump it, is called a pump. As a rule, any movement of a liquid by similar aggregates is carried out due to the transfer of potential or kinetic energy to it. Depending on the technical indicators, different types of pumps are used. At the same time, they differ in efficiency, power, volumes of fluid pumped per unit time, maximum head and resulting pressure. The most used group of pumps are vane pumps. Their distinctive feature is the impeller rotating in a fixed housing, equipped with blades. Depending on the warehous
APA, Harvard, Vancouver, ISO, and other styles
5

Indra, Rezhi Dika, Ade Syaiful Rachman, Wafiyuddin Wafiyuddin, and Eddy Setiadi Soedjono. "Strategy to Improve the Performance of The Ngagel I Water Treatment Plant (IPA) in Pdam Surya Sembada Surabaya City Through Increasing Pump Efficiency." Jurnal Indonesia Sosial Teknologi 5, no. 2 (2024): 527–39. http://dx.doi.org/10.59141/jist.v5i2.925.

Full text
Abstract:
PDAM Surya Sembada Surabaya’s energy cost in 2021 amounted to Rp 147.654.439.569, with an energy cost ratio of 24.37%, and the electricity cost of production unit accounted for 76% of the total energy consumption of PDAM. The relatively flat topography does not allow gravity-based systems for water supply. Aging equipment has decreased overall pump efficiency (ηpt) and increased energy consumption, particularly in Ngagel I WTP, built in 1922, necessitating an energy audit. Energy audit includes measuring pump flow rate and pressure, power, voltage, current, power factor, pump and motor pump ro
APA, Harvard, Vancouver, ISO, and other styles
6

Kafiatullin, Rashid. "Evaluation method for energy parameters and energy saving potential of oil reservoir pressure maintenance pumps operating beyond permissible limits." Energy Safety and Energy Economy 6 (December 2021): 35–38. http://dx.doi.org/10.18635/2071-2219-2021-6-35-38.

Full text
Abstract:
Oil reservoir pressure maintenance pumps are often pushed to operate significantly outside of their original design parameters. This can cause operating problems which impact their reliability and efficiency. The author offers the evaluation methodology for energy parameters and energy saving potential of oil reservoir pressure maintenance pumps in order to develop major pump parameters like efficiency, pressure, and specific electric power. The methodology was tested on 42 pump units. The values of variations of basic parameters indicate the energy saving potential of pump units.
APA, Harvard, Vancouver, ISO, and other styles
7

Wu, Wengang. "Phase change storage solar heat pump hydronics based on cloud computing." Thermal Science 28, no. 2 Part B (2024): 1423–29. http://dx.doi.org/10.2298/tsci2402423w.

Full text
Abstract:
In order to understand the solar heat pump heating system, a phase-change storage solar heat pump heating system based on cloud computing is proposed. This paper first introduces the solar heat pump as a phase change energy storage that can change four types of heat depending on the weather conditions and significantly reduce the energy consumption of the system. Second, through the special design of the energy storage capacitor, in addition adjusting the energy distribution of the solar heat pump system, it can also improve the reliability of supply and demand between the solar heat pump syst
APA, Harvard, Vancouver, ISO, and other styles
8

Monangin, Galvani Amideo, Novi Dwi Raharjo, Ahmad Ahmad, and Eddy Setiadi Soedjono. "North Banjarmasin’s distribution pump’s electric energy audit at PT Air Minum Bandarmasih." Indonesian Journal of Multidisciplinary Science 3, no. 2 (2023): 110–14. http://dx.doi.org/10.55324/ijoms.v3i2.715.

Full text
Abstract:
This study aims to audit the electrical energy of the North Banjarmasin zone distribution pump at the Bandarmasih Drinking Water Company in Banjarmasin City. The case study method was used to find out the description of the problem conditions of the pump installation system and the existing distribution network. The largest electricity consumption is in the operation of distribution pumps. One of the distribution pumps is the Banua Anyar booster pump which serves the North Banjarmasin zone. Electricity consumption during 2022 on the Banua Anyar booster is 1,223,432 kWh at a cost of Rp. 1,521,7
APA, Harvard, Vancouver, ISO, and other styles
9

Alhamidiy, Abdillah Nur, Ali Masduqi, Bustami Bustami, and Bagas Wahyu Adhi. "STUDI OPTIMASI POMPA DISTRIBUSI SPAM KOTA PALANGKA RAYA UNTUK EFISIENSI ENERGI." Jurnal Teknik Sipil Giratory UPGRIS 1, no. 1 (2024): 47–55. http://dx.doi.org/10.26877/giratory.v1i1.19460.

Full text
Abstract:
SPAM of Palangka Raya City has a distribution unit which is powered by six pumps but only two pumps are functioning due to frequent damage to the pumps. The pumps that function is Pump III and Pump V. This research aims to evaluate pump efficiency and specific energy consumption (SEC) so that technical recommendations for optimizing existing distribution pumps are known. Pump III is installed with a VSD with a SEC value of 0.14 KWh/m3 with a pump efficiency of 70.41% so it does not require minor or major repairs but requires a new backup pump because it works 24 hours while Pump V has a SEC of
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Qihua, Shun Kang, Zhiang Xie, Li Cao, Zhaoxu Yan, and Weidong Zhang. "Pulp pumping efficiency II – Designing of a pulp pump." Nordic Pulp & Paper Research Journal 36, no. 2 (2021): 265–75. http://dx.doi.org/10.1515/npprj-2021-2008.

Full text
Abstract:
Abstract Based on the loss model of pulp pump set up in the I part of this research, an efficient designing method is proposed by taking account of the influences of head reduction by small blade number, leakage loss via tip clearance, and erosion-corrosion wears in pumps separately. Further, a two-stage optimal designing approach was proposed to tackle the oversized design. The pump designing was performed by coupling with a CFD-based optimization procedure. An efficiency increase of near 10 % was achieved on the pump model validated in laboratory. It was proved that performance could be impr
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pump energy"

1

Nilsson, Hanna, and Sandra Johansson. "Renewable energy water pump." Thesis, University of Skövde, School of Technology and Society, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-4171.

Full text
Abstract:
<p>Målet med det här projektet är att bygga ett tillförlitligt pumpsystem som inte är beroende av elektricitet eller icke förnyelsebara bränslen. Pumpen ska klara att pumpa 50-100 liter per dygn till en höjd av 10 meter. Konstruktionen ska placeras i indianbyn El Vergel i Amazonas, Colombia. Pumpen ska pumpa orent vatten till vattenreningstunnor de månader som invånarna i byn inte har tillgång till regnvatten.</p><p>Olika koncept arbetades fram och utvärderades. Det som valdes var en cykeldriven vattenpump, vilken uppfyllde alla krav.</p><p>Pumpens axel är kopplad till bakhjulets fälg med en k
APA, Harvard, Vancouver, ISO, and other styles
2

Kuhn, Reinaldo. "On site measurements of kraft pulp pump system efficiency." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/656.

Full text
Abstract:
With increasing energy costs and competitive pressures, interest has increased in surveying installed pumps for potential energy savings. Field pump efficiency tests are required to assess pumping performance and help to identify improvement opportunities. This work concerns the on-site measurements of pulp-suspension pumping efficiency. This involves the measurement of pump head, flow rate and power consumption. Provided that consistent flow measurements are available, it is possible to reliably and non-invasively measure actual pump system efficiencies in pulp suspension flow, with a minimum
APA, Harvard, Vancouver, ISO, and other styles
3

Norrman, Marcus, and Felix Monthan. "Heat Pump Data Performance Analysis of Large Scale Ground Source Heat Pump Systems." Thesis, KTH, Energiteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-276072.

Full text
Abstract:
This study aimed at refining and improving current methodology concerning large-scale heat pump performance. This study was performed on two large-scale ground source heat pumps located in Solna (Stockholm). These were connected to an aquifer thermal energy storage system which provided heating and cooling for two office buildings. The heat pumps had been equipped with preliminary sensors from the BMS (Building management system) and been in operation since 2016. In 2019, additional detailed measurement equipment from ClimaCheck was installed to collect comprehensive data from the heat pumps t
APA, Harvard, Vancouver, ISO, and other styles
4

Riffat, S. B. "A heat pump incorporating thermochemical energy storage." Thesis, University of Oxford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371559.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

FLE, Guillaume. "Extending the pump energy range for a pump-probe system using High Harmonics Generation." Thesis, Uppsala universitet, Molekyl- och kondenserade materiens fysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-266350.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mancini, Ferdinando. "ENERGY EFFICIENCY IMPROVEMENTS OF HOUSEHOLD HEAT PUMP SYSTEMS." Doctoral thesis, Università degli studi di Padova, 2011. http://hdl.handle.net/11577/3423220.

Full text
Abstract:
Sustainable development is one of the major challenges that humanity faces today. The rational use of energy resources and the increase of systems efficiency seems to be an important task for all contexts of modern life, from industry to transport and household appliances. The interest on this subject is justified not only by the price of energy, which can potentially increase, but also by the need to reduce emissions of gases, which are thought to be responsible for global warming. This work wants to present innovative solutions for the energy efficiency improvement of household heat pump sy
APA, Harvard, Vancouver, ISO, and other styles
7

Vouzas, George. "Low cost solar powered water pump." Master's thesis, University of Cape Town, 1985. http://hdl.handle.net/11427/22328.

Full text
Abstract:
Bibliography: pages 112-118.<br>The study describes the development of a prototype solar energy powered water pump. The system was developed in an attempt to meet the following requirements and constraints: Cheap, convenient and easy manufacture, reliability and low maintanance of the system, no auxiliary power requirements, and minimum running costs. The literature survey indicated that a number of pumping systems have been studied in the past, with variable successes, based on numerous thermodynamic cycles. Our system operates on the combination of two constant volume and two constant pressu
APA, Harvard, Vancouver, ISO, and other styles
8

Piechowski, Miroslaw. "A ground coupled heat pump system with energy storage /." Connect to thesis, 1996. http://eprints.unimelb.edu.au/archive/00000724.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Low, Robert E. "A variable-capacity heat pump for renewable energy recovery." Thesis, University of Edinburgh, 1991. http://hdl.handle.net/1842/12477.

Full text
Abstract:
This thesis describes research carried out by the author between 1986 and 1990 at the Department of Chemical Engineering, University of Edinburgh, under the supervision of Dr Colin Pritchard. The aim of the research was to devise and evaluate a novel compression heat pump cycle as a potential technology for the utilisation of work and heat from environmental sources in industrial applications. The principal requirement of such a heat pump is that it can accept time-varying inputs of work and heat whilst supplying a controlled heat load at constant delivery temperature to an external load. This
APA, Harvard, Vancouver, ISO, and other styles
10

Sandström, Camilla. "Frosting and Defrosting on Air Source Heat Pump Evaporators." Thesis, KTH, Energiteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299880.

Full text
Abstract:
Air source heat pumps has become increasingly popular for residential households as they are considered an energy efficient alternative on the heating market. The air source heat pumps use the outdoor air as heat source and can operate in cold climates around -15 to -20°C, but as the temperatures drops below 6°C the heat pump experiences problems with frost accumulating on the heat exchanger. The frost collected on the heat exchanger lowers the heat pump performance and can in worst case cause a malfunction. Therefore, frost suppression and defrost strategies are important to increase efficien
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Pump energy"

1

Sentā, Hīto Ponpu Chikunetsu. ヒートポンプ・蓄熱白書. Ōmusha, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

LeClaire, Mitchell R. Geothermal energy training program: Training manual. M.R. LeClaire and M.J. Lafferty, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Canada. Office of Energy Efficiency., ed. Heating and cooling with a heat pump. The Office, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Canada. Office of Energy Efficiency., ed. Heating and cooling with a heat pump. 2nd ed. Office of Energy Efficiency, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Energy Efficiency and Renewable Energy Clearinghouse (U.S.), ed. Geothermal energy--: Power from the depths. Energy Efficiency and Renewable Energy Clearinghouse, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Elliot, R. Neal. Realizing energy efficiency opportunities in industrial fan and pump systems. ACEEE, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Loxley, Thomas E. Earth coupling energy research: Inverted cave portfolio : a collection of technical papers. 3rd ed. Inverted Cave Education, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

CANMET Energy Technology Centre (Canada), CANETA Research, TECHNOSIM Consulting Group, and Canada. Renewable and Electrical Energy Division., eds. Commercial earth energy systems: A buyer's guide. Renewable and Electrical Energy Division, Natural Resources Canada, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Institute, World Resources. Plants at the pump: Biofuels, climate change, and sustainability. World Resources Institute, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bureau, Montana Conservation Districts. Using solar power to pump water for livestock in Montana. Montana Dept. of Natural Resources and Conservation, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Pump energy"

1

Williams, Albert. "Pump Systems." In Industrial Energy Systems Handbook. River Publishers, 2023. http://dx.doi.org/10.1201/9781003356431-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cullen, N. "Energy Cost Management in Water Supply." In Pump Technology. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-662-38296-7_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

López-Acosta, Norma Patricia, David Francisco Barba-Galdámez, and Kitzia Judith Arizmendi-López. "Energy Geostructures." In Geothermal Heat Pump Systems. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-24524-4_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yedidiah, Sam. "Losses of Energy." In Centrifugal Pump User’s Guidebook. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-1217-8_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Seetharaman, S., and P. A. Lakshminarayanan. "Cooling, Coolants, and Water Pump and Oil Pump." In Energy, Environment, and Sustainability. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0970-4_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Doty, Steve. "Fan and Pump Drives." In Commercial Energy Auditing. River Publishers, 2020. http://dx.doi.org/10.1201/9781003151999-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lun, Y. H. Venus, and S. L. Dennis Tung. "Total Energy Heat Pump." In Heat Pumps for Sustainable Heating and Cooling. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31387-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lamarche, Louis. "Pumping Energy." In Fundamentals of Geothermal Heat Pump Systems. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32176-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lamarche, Louis. "Geothermal Energy." In Fundamentals of Geothermal Heat Pump Systems. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32176-4_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Garg, H. P. "Solar Powered Water Pump." In Advances in Solar Energy Technology. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3797-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pump energy"

1

Cao, Zheng, Weijia Yang, Qingbo Wang, and Zhecheng Wang. "Influence of Initial Rotational Speed of Variable-Speed Pump Storage Units on the Hydraulic Interference for Fixed-Speed Units During Pump Power-Off." In 2024 IEEE 8th Conference on Energy Internet and Energy System Integration (EI2). IEEE, 2024. https://doi.org/10.1109/ei264398.2024.10991814.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Harris, Dennis, Jack English, and Jackris Leemasawatdigul. "Leveraging ESP Energy Efficiency with Permanent Magnet Motors." In SPE Electric Submersible Pump Symposium. Society of Petroleum Engineers, 2017. http://dx.doi.org/10.2118/185129-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nowicki, P., M. Sallaberger, and P. Bachmann. "Modern design of pump-turbines." In Energy Conference (EPEC). IEEE, 2009. http://dx.doi.org/10.1109/epec.2009.5420368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kato, Hideya, Yoshiharu Inaguma, Kyosuke Haga, and Mikio Suzuki. "Energy-Saving Power Steering Pump." In International Congress & Exposition. SAE International, 1995. http://dx.doi.org/10.4271/950582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dehghan, S. M., M. Mohamadian, and E. Siefi. "Discontinuous energy pump source inverters." In Technologies Conference (PEDSTC). IEEE, 2011. http://dx.doi.org/10.1109/pedstc.2011.5742459.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gordon, J. L. "Parametric analysis of pump-turbine sites." In Energy Conference (EPEC). IEEE, 2009. http://dx.doi.org/10.1109/epec.2009.5420906.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kirol, Lance D., and Michael W. Dacus. "Magnetic Heat Pump Design." In 22nd Intersociety Energy Conversion Engineering Conference. American Institute of Aeronautics and Astronautics, 1987. http://dx.doi.org/10.2514/6.1987-9025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Malmberg, Malin, Willem Mazzotti, José Acuña, Henrik Lindståhl, and Alberto Lazzarotto. "High temperature borehole thermal energy storage - A case study." In International Ground Source Heat Pump Association. International Ground Source Heat Pump Association, 2018. http://dx.doi.org/10.22488/okstate.18.000036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Clark, II, William. "Offshore watersource heat pump applications." In Intersociety Energy Conversion Engineering Conference. American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-3936.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, M. "Optimal Pump Design and Control of Bypass Blending Station Systems." In ASME 2005 International Solar Energy Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/isec2005-76028.

Full text
Abstract:
Previous investigation found that the bypass blending station (BBS) system can potentially reduce in-building pump power by 48% to 97% of the design pump power. However, the BBS pump may work in an unstable zone when it has 100% of the building design flow. This paper investigates the impacts of pump flow capacity and pump control on the pump operation stability and power savings using analytical and numerical methods. The investigation found that the optimal pump design flow depends primarily on the building load and recirculation flow rate requirements. The optimal pump size should be determ
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Pump energy"

1

Norad. PR-015-09205-E01 Assessment of Variable Frequency and Variable Speed Drives for Pipeline Pump Applications. Pipeline Research Council International, Inc. (PRCI), 2010. http://dx.doi.org/10.55274/r0010718.

Full text
Abstract:
Adjustable speed drive systems for pipeline pump applications have enabled variable speed pumping as a means of reliable capacity control. Through a number of case studies, these systems have proven to be as reliable as operating multiple pumps with a discharge control valve or recycling flow to reach the desired capacity variations. Adjustable speed drive installations offer a potential savings in energy efficiency compared to operating pumps in recycle or throttling at a constant speed, especially for installations where a large turndown is required to meet demand variations. As energy costs
APA, Harvard, Vancouver, ISO, and other styles
2

Ziada, A. H. W-151 mixer pump energy absorption cylinder analysis. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/492108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Simmons, Jeremy, Dan Griffin, Larry Trentin, and Linda Rauch. Seawater Compatible Rotary Pump for Wave Energy Conversion. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/2320241.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Broders, M. A. (International Energy Agency Heat Pump Center Working Team meeting). Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6341871.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fyfe, Caroline, Arthur Grimes, Shannon Minehan, and Phoebe Taptiklis. Evaluation of the Warmer Kiwis Homes Programme: Full Report including Cost Benefit Analysis. Motu Economic and Public Policy Research, 2022. http://dx.doi.org/10.29310/wp.2022.14.

Full text
Abstract:
We evaluate the heat pump component of New Zealand’s Warmer Kiwi Homes (WKH) programme. The programme includes provision of heat pumps in living areas for eligible households (based on neighbourhood or income) that do not have suitable heating. It also includes installation of retrofitted insulation for houses with insufficient insulation. Staggered installation enables difference-in-difference estimates of impacts. Heat pump outcomes on which we focus include warmth and dryness of the living area, personal comfort and wellbeing, and electricity consumption. We combine the heat pump findings w
APA, Harvard, Vancouver, ISO, and other styles
6

Fyfe, Caroline, Arthur Grimes, Shannon Minehan, and Phoebe Taptiklis. Evaluation of the Warmer Kiwis Homes Programme: Summary Report including Cost Benefit Analysis. Motu Economic and Public Policy Research, 2022. http://dx.doi.org/10.29310/wp.2022.13.

Full text
Abstract:
We evaluate the heat pump component of New Zealand’s Warmer Kiwi Homes (WKH) programme. The programme includes provision of heat pumps in living areas for eligible households (based on neighbourhood or income) that do not have such heating. It also includes installation of retrofitted insulation for houses with insufficient insulation. Staggered installation enables difference-in-difference estimates of impacts. Heat pump outcomes on which we focus include warmth and dryness of the living area, personal comfort and wellbeing, and electricity consumption. We combine the heat pump findings with
APA, Harvard, Vancouver, ISO, and other styles
7

Johra, Hicham. Performance overview of caloric heat pumps: magnetocaloric, elastocaloric, electrocaloric and barocaloric systems. Department of the Built Environment, Aalborg University, 2022. http://dx.doi.org/10.54337/aau467469997.

Full text
Abstract:
Heat pumps are an excellent solution to supply heating and cooling for indoor space conditioning and domestic hot water production. Conventional heat pumps are typically electrically driven and operate with a vapour-compression thermodynamic cycle of refrigerant fluid to transfer heat from a cold source to a warmer sink. This mature technology is cost-effective and achieves appreciable coefficients of performance (COP). The heat pump market demand is driven up by the urge to improve the energy efficiency of building heating systems coupled with the increase of global cooling needs for air-cond
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Yan, Karthikeya Devaprasad, Zhihong Pang, and Cheryn E. Metzger. Energy Saving Quantification on Ductless Heat Pump (DHP) in Existing Homes. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1635114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Herk, Anastasia. Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1340569.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Herk, Anastasia. Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1358051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pump energy' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography