Relevant bibliographies by topics / Pump Press

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Pump Press'

Author: Grafiati
Published: 4 June 2021
Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pump Press.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pump Press"

1

Gao, Jun, Guo Yi Yan, Gen Yun Peng, and Guan Nan Xi. "Experiment Study on Performances of Servo Pump Used in Hydraulic Press Machine." Advanced Materials Research 516-517 (May 2012): 892–95. http://dx.doi.org/10.4028/www.scientific.net/amr.516-517.892.

Full text
Abstract:
As we known, the energy efficiency of pump-control system is higher than valve-control system. So, using pump-control system to replace valve-control system has a positive meaning to improve the energy efficiency in hydraulic press machine. In order to research the performance of servo pump used in hydraulic press machines, the present study is conducted. First, a test bench for comparison of pump-control and valve-control system is established. In this test bench, the pump of former valve-control system and the servo pump are settled. These two pumps are switched by solenoid to supply oil for
APA, Harvard, Vancouver, ISO, and other styles
2

Nugroho, Wahyu Isti, Muhammad Rienaldy Karuana, and Timotius Anggit Kristiawan. "Penambahan Alat Bantu Pemindah Produk Menggunakan Pneumatik dan Karakuri pada Mesin Cup Lower Pump Wire Press PT. Mitsuba Indonesia." Jurnal Rekayasa Mesin 16, no. 1 (2021): 56. http://dx.doi.org/10.32497/jrm.v16i1.2516.

Full text
Abstract:
Pemindahan produk dari mesin press memiliki resiko yang sangat tinggi terhadap keselamatan operator. Salah satu mesin yang terdapat di PT Mitsuba Indonesia adalah Press Fit Pump Assy yang berfungsi untuk menyatukan lower cup dan upper cup module fuel pump. Permasalahan yang terjadi yaitu kapasitas produksi belum tercapai. Penyebabnya adalah ruang di dalam mesin yang cukup sempit, sehingga gerakan operator kurang leluasa dan perlu waktu pada saat pengambilan produk. Solusi untuk mengatasi masalah tersebut yaitu melakukan modifikasi pada mesin Cup Lower Pump Wire Press dengan menambahkan alat ba
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Jiayin, Kaifeng Liu, Foon-yee Chan, et al. "Usability Testing for Smart IV Pumps Through Simulation-based Evaluation." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 63, no. 1 (2019): 2209–10. http://dx.doi.org/10.1177/1071181319631187.

Full text
Abstract:
Poorly designed user interfaces limit the effective use of medical devices, leading to user errors. Hence, before such devices are implemented, it is essential to identify potential usability issues. A common approach to testing usability is a simulation-based test, which allows practitioners to identify usability issues by observing how users interact with the product being tested. Infusion pumps are frequently used in medical settings, and much effort has been made to advance their design and features. To enhance patient safety, smart intravenous (IV) pumps with safety functions (e.g., drug
APA, Harvard, Vancouver, ISO, and other styles
4

Nowogoński, Ireneusz, Ewa Ogiołda, and Marlena Kubiszyn. "MODELING OF PUMP OPERATION CONDITIONS IN GRAVITY-PRESSURE COMBINED SYSTEMS." Zeszyty Naukowe Uniwersytetu Zielonogórskiego / Inżynieria Środowiska 168, no. 48 (2017): 35–44. http://dx.doi.org/10.5604/01.3001.0011.5886.

Full text
Abstract:
The paper presents the problem of working conditions in gravitationalpressure systems simulation. The practical example takes into account the dynamical analysis of a system equipped with 10 pump stations with different functions. Both local press stations, local stations for shallowing network and transit pumping stations between the towns were used. The model allowed to optimize the active volume of the pump station tanks, the selection of pumps, including the frequency of power on and the time of holding the sewage.
APA, Harvard, Vancouver, ISO, and other styles
5

Lu, Jinqi, and Dezhong Wang. "Integrated design and hydraulic model optimization of model horizontal main pump based on CFD fluid dynamics analysis." Journal of Physics: Conference Series 2707, no. 1 (2024): 012026. http://dx.doi.org/10.1088/1742-6596/2707/1/012026.

Full text
Abstract:
Abstract There are few studies and reports related to horizontal main pumps for nuclear power plants. The installation of vertical main pumps for small reactors requires the design of special elbows on the pressure vessel. Horizontal main pump, as a new main pump structure, can reduce the diameter of the main pressure vessel and simplify the structure of the pressure vessel. Compared with the vertical main pump, the horizontal main pump needs to control its axial dimension to improve its stiffness, which makes it impossible to set a long straight pipe section at the inlet, which has an impact
APA, Harvard, Vancouver, ISO, and other styles
6

Antsifirov, A. A., and V. A. Krivoshein. "Selection of the optimal hydraulic drive for the press." Glavnyj mekhanik (Chief Mechanic), no. 7 (June 11, 2021): 50–60. http://dx.doi.org/10.33920/pro-2-2107-05.

Full text
Abstract:
The research presented in the article is devoted to the selection of the electric motor of the hydraulic press drive with a nominal force of 5MN. The article presents the main characteristics and the description of the press operation using the means of mechanization of the technological process of pressure treatment. Using the Deform-3D software package, the process of stamping the crosspiece of the ZIL-130 cardan shaft was simulated. Based on the presented hydraulic scheme of the press, its topological model was formed in the PA-9 software package. The deformation force obtained in the cours
APA, Harvard, Vancouver, ISO, and other styles
7

Ibrahim, Maulana Malik, Dezya Aditya Pratama, and Yudi Nata. "MENENTUKAN VARIABEL YANG PALING BERPENGARUH TERHADAP KINERJA POMPA HIDRAM MENGGUNAKAN METODE ESTIMASI EFEK ALGORITMA YATES." Jurnal Permadi: Perancangan, Manufaktur, Material dan Energi 2, no. 2 (2020): 53–58. http://dx.doi.org/10.52005/permadi.v2i2.63.

Full text
Abstract:
In each study, often many variables are used and interrelated with each other. The increasing number of variables often confuses which variables are the most dominant for changes or desired results.Many methods are used to find the most dominant variable in influencing the research output.Factorial 2 3design with estimated effects of Yates algorithm is a method that can be used to find the most dominant variable in influencing output. This study aims to find the most dominant variable on the output pressure generated by the hydram pump. The results calculated using this method are the result o
APA, Harvard, Vancouver, ISO, and other styles
8

Ansori, Faisal, and Edi Widodo. "Analysis on Centrifugal Pump Performance in Single, Serial, and Parallel." Journal of Energy, Mechanical, Material and Manufacturing Engineering 3, no. 2 (2018): 79. http://dx.doi.org/10.22219/jemmme.v3i2.6958.

Full text
Abstract:
The pump is a tool to provide the mechanical energy to the liquid in the pump constant fluid density and large. In terms of mechanism, the pump is divided into three types, namely, rotary pumps, pump the shaft/piston and centrifugal pumps. The use of the pump are the most widely used either in the household or in the environment industry. In the centrifugal pumps, there are losses – losses among other head losses. To find the head losses among other data needs head on the pump, the pump and the discharge flow rate of the pump. Head is defined as energy per unit weight of the fluid. The head of
APA, Harvard, Vancouver, ISO, and other styles
9

Uesugi, Kaoru, Keizo Nishiyama, Koki Hirai, et al. "Survival Rate of Cells Sent by a Low Mechanical Load Tube Pump: The “Ring Pump”." Micromachines 11, no. 4 (2020): 447. http://dx.doi.org/10.3390/mi11040447.

Full text
Abstract:
A ring pump (RP) is a useful tool for microchannels and automated cell culturing. We have been developing RPs (a full-press ring pump, FRP; and a mid-press ring pump, MRP). However, damage to cells which were sent by the RP and the MRP was not investigated, and no other studies have compared the damage to cells between RPs and peristaltic pumps (PPs). Therefore, first, we evaluated the damage to cells that were sent by a small size FRP (s-FRP) and small size MRPs (s-MRPs; gap = 25 or 50 μm, respectively). “Small size” means that the s-FRP and the s-MRPs are suitable for microchannel-scale appl
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Meng, Ji Bin Zou, and Jing Shang. "The Out-Rotator of Spin Traveling Wave Pump on Magnetic Fluid." Key Engineering Materials 503 (February 2012): 3–7. http://dx.doi.org/10.4028/www.scientific.net/kem.503.3.

Full text
Abstract:
According to researching the spin traveling wave pump, the relationship of the characteristics of magnetic fluid and the press is investigated under the spin magnetic field by the theory method. The relationship of moving, magnetic field and press is investigated by the decoupled computation between the magnetic field and force. The method is scientificity and rationality by the testing. The distributing shape of magnetic fluid in the pump is affected by the adding magnetic field under the spin magnetic field when the magnetic fluid is filled in the pump. At the same time, the adding magnetic
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pump Press"

1

Effrece, Jr Frank. "The dynamic controls of a hydraulic press by controlling the pump motor." Ohio University / OhioLINK, 1987. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1183044178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Effrece, Frank. "The dynamic controls of a hydraulic press by controlling the pump motor." Ohio : Ohio University, 1987. http://www.ohiolink.edu/etd/view.cgi?ohiou1183044178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Лебедєв, Антон Юрійович. "Підвищення вихідних характеристик лабіринтно-гвинтових насосів шляхом визначення їх раціональних параметрів". Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/21759.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.05.17 – гідравлічні машини та гідропневмоагрегати. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2016. У дисертаційній роботі визначено, науково обґрунтовано і вирішено задачу підвищення вихідних характеристик лабіринтно-гвинтових насосів за рахунок розробки теорії його робочого процесу. Уточнено фізичну модель його робочого процесу і на цій основі розроблено методику їх розрахунку та проектування, що включає багатокритеріальну оптимізацію параметрів і не містить емпірични
APA, Harvard, Vancouver, ISO, and other styles
4

Лебедєв, Антон Юрійович. "Підвищення вихідних характеристик лабіринтно-гвинтових насосів шляхом визначення їх раціональних параметрів". Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/21757.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.05.17 – гідравлічні машини та гідропневмоагрегати. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2016. У дисертаційній роботі визначено, науково обґрунтовано і вирішено задачу підвищення вихідних характеристик лабіринтно-гвинтових насосів за рахунок розробки теорії його робочого процесу. Уточнено фізичну модель його робочого процесу і на цій основі розроблено методику їх розрахунку та проектування, що включає багатокритеріальну оптимізацію параметрів і не містить емпірични
APA, Harvard, Vancouver, ISO, and other styles
5

Мормило, Яков Михайлович. "Підвищення рухливості військових колісних машин шляхом застосування міжколісних диференціалів з гідростатичним блокуванням без фрикційних дисків". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2020. http://repository.kpi.kharkov.ua/handle/KhPI-Press/46109.

Full text
Abstract:
Дисертація на здобуття наукового ступеня доктора філософії за спеціальністю 255 "Озброєння та військова техніка" (25 – Воєнні науки, національна безпека, безпека державного кордону). – Національний технічний університет "Харківський політехнічний інститут", Харків, 2020. Актуальність теми. Потреба в міжколісних диференціалах (МКД) виникла відразу ж після появи перших автомобілів із приводом на два колеса однієї осі. Найбільш відчутно ця потреба проявлялася при проходженні автомобілем поворотів і їзді по дорогах з нерівностями. Відсутність МКД у таких трансмісіях приводило до появи циркуляції п
APA, Harvard, Vancouver, ISO, and other styles
6

Коротаев, Павел Алексеевич. "Энергоэффективный электропривод насосного агрегата с улучшенными пусковыми характеристиками". Thesis, НТУ "ХПИ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/22707.

Full text
Abstract:
Диссертация на соискание ученой степени кандидата технических наук по специальности 05.09.03 – электротехнические комплексы и системы. – Национальный технический университет "Харьковский политехнический институт", Харьков, 2016. Диссертация посвящена повышению энергоэффективности электроприводов насосов за счет снижения потерь воды и устранения порывов водопроводных сетей, что возникают при пусках насосных агрегатов. Для Украины, обеспеченной собственными энергоресурсами лишь на 40%, решение проблемы их сбережения является крайне актуальной задачей. Автоматизированный ЭП, являясь средством оп
APA, Harvard, Vancouver, ISO, and other styles
7

Бурлига, Михайло Борисович. "Розвиток методів розрахунку та вибір раціональних схем двопотокових безступінчастих гідрооб'ємно-механічних трансмісій колісних тракторів". Thesis, НТУ "ХПІ", 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/35538.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.22.02 – автомобілі та трактори. Національний технічний університет "Харківський політехнічний інститут", Харків, 2017. Дисертація присвячена розвитку методів розрахунку для аналізу робочих параметрів безступінчастих ГОМТ і їх основних елементів ГОП, прогнозуванню техніко-економічних показників машинно-тракторного агрегату для визначення раціональних схемних рішень ГОМТ. Актуальність роботи полягає у необхідності забезпечення конкурентоспроможності вітчизняних тракторів. Здійснено аналіз роботи двопотокових
APA, Harvard, Vancouver, ISO, and other styles
8

Коротаєв, Павло Олексійович. "Енергоефективний електропривод насосного агрегату з покращеними пусковими характеристиками". Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/22706.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.09.03 – електротехнічні комплекси та системи. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2016. Дисертація присвячена підвищенню енергоефективності електроприводів насосів за рахунок зниження втрат води та усунення поривів водопровідних мереж, що виникають при пусках насосних агрегатів. Побудовані математична та комп'ютерна моделі електропривода насосного агрегату як електромеханогідравлічної системи з розподіленими параметрами водопровідної магістралі. Встановлено, що
APA, Harvard, Vancouver, ISO, and other styles
9

Бурлига, Михайло Борисович. "Розвиток методів розрахунку та вибір раціональних схем двопотокових безступінчастих гідрооб'ємно-механічних трансмісій колісних тракторів". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/35536.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.22.02 – автомобілі та трактори. Національний технічний університет "Харківський політехнічний інститут", Харків, 2017. Дисертація присвячена розвитку методів розрахунку для аналізу робочих параметрів безступінчастих ГОМТ і їх основних елементів ГОП, прогнозуванню техніко-економічних показників машинно-тракторного агрегату для визначення раціональних схемних рішень ГОМТ. Актуальність роботи полягає у необхідності забезпечення конкурентоспроможності вітчизняних тракторів. Здійснено аналіз роботи двопотокових Г
APA, Harvard, Vancouver, ISO, and other styles
10

Шудрик, Олександр Леонідович. "Підвищення ефективності використання відцентрових насосів за рахунок вдосконалення математичних моделей робочого процесу". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/35499.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.05.17 – гідравлічні машини та гідропневмоагрегати. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2018 р. Дисертацію присвячено вирішенню важливої науково-технічної задачі підвищення ефективності роботи заглибного електровідцентрового насоса при його роботі на реальній рідині, що представляє собою суміш в'язкої неньютонівської рідини, води та газу, за рахунок вдосконалення математичних моделей. Виконано аналіз концепцій розвитку насособудування в Україні. Описано методи м
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Pump Press"

1

Farmer, Geoffrey. For personal pleasure: Gerald Lyn Fischer and the Pump Press : with a bibliography. Book Collectors' Society of Australia, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

C, Goyal Gopal, and Technical Association of the Pulp and Paper Industry., eds. Anthraquinone pulping: A Tappi press anthology of published papers, 1977-1996. Tappi press, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Arcand, G. Dewatering pulp and paper mill sludge using the Kamyr ring press. Environment Canada, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

W, Joyce T., ed. Environmental issues: A TAPPI Press anthology of published papers, 1990 (other than the Environmental Conference). TAPPI, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ōbi, Yūko. Kasutori zasshi kō: Bekkan. Kanazawa Bunpokaku, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Matthew, Coleman, ed. Energy engineering and management in the pulp and paper industry: A TAPPI Press anthology of published papers, 1986-1990. TAPPI Press, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Friedman, Jerome. Miracles and the pulp press during the English Revolution =: The battle of the frogs and Fairford's flies. UCL Press, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Friedman, Jerome. The battle of the frogs and Fairford's flies: Miracles and the pulp press during the English Revolution. St. Martin's Press, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Friedman, Jerome. The battle of the frogs and Fairford's flies: Miracles and the pulp press during the English Revolution. St. Martin's Press, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gregory, Ian, Peter Atkins, Michael Haynes, Mike Resnick, and Milo James Fowler. The Alchemy Press Book of Pulp Heroes. Alchemy Press, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Pump Press"

1

Deal, Raoul. "Pulp, Pull, Press, and Print." In The Art and Art Therapy of Papermaking. Routledge, 2023. http://dx.doi.org/10.4324/9781003216261-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Friedman, Jerome. "Censorship, Popular Publication, and the Pulp Press." In The Battle of the Frog’s and Fairford’s Flies. Palgrave Macmillan US, 1993. http://dx.doi.org/10.1007/978-1-137-10052-8_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tuong, Nguyen Nhat, Tran Van Truong, Pham Quoc Khanh, Pham Thi Hong Nga, Duong The Phong, and Nguyen Thanh Tan. "Structure and Hydraulic Analysis of a 5-Ton Hydraulic Press by Simulation." In Advances in Transdisciplinary Engineering. IOS Press, 2024. http://dx.doi.org/10.3233/atde240597.

Full text
Abstract:
This study outlines a comprehensive approach to designing, simulating, and manufacturing a 5-ton hydraulic press. It begins with the calculation and design of the hydraulic system and machine frame based on the machine’s specifications. The hydraulic circuit is then simulated using Matlab Simulink software with the Simscape Hydraulic tool to validate the hydraulic drive system calculations. Furthermore, different machine frame structure options are analyzed using the finite element method (FEM) with Altair Simlab software, and the most optimal option is selected based on structural criteria an
APA, Harvard, Vancouver, ISO, and other styles
4

Santos, Márcio, Jorge André, Ricardo Mendes, and José B. Ribeiro. "TECHNICAL COMPARISON AND EVALUATION OF A PUMPED THERMAL ENERGY STORAGE WITH TWO DIFFERENT DESIGNS." In Proceedings of the 7th International Seminar on ORC Power System (ORC 2023), 2024th ed. Editorial Universidad de Sevilla, 2024. http://dx.doi.org/10.12795/9788447227457_64.

Full text
Abstract:
Increased worldwide demand for energy (especially electricity), rising energy costs, and heightened environmental concerns are factors that continually press for the adoption of technologies to exploit renewable energy sources (RES). In order to adopt these systems, large-scale energy storage systems are needed to ensure the security of supply in energy systems due to the increasing share of renewable energy sources in the energy mix. The paper proposes a new form of energy storage technology that utilizes a combination of a heat pump and an organic Rankine cycle, referred to as Carnot Batteri
APA, Harvard, Vancouver, ISO, and other styles
5

Henderson, John. "Pump up the Volume: Juvenal, Satire 1. 1-21." In Writing down Rome. Oxford University PressOxford, 1998. http://dx.doi.org/10.1093/oso/9780198150770.003.0010.

Full text
Abstract:
Abstract Under the Flavians, the second dynasty of Caesars, poetry wrote its powers down, either virtually erasing all scope to signify and not bothering to count for more than a few seconds at a time (Martial’s myriad epigrams of nonchalance, filth, panegyric on a pin-head) or slickly celebrating momentary ingenuity in the rough in denial of both finish and authority (Statius’ instant lyrics gilding the social calendar, putting faces on power, gawping at the grandeur of Rome). Writers of the early second century, in the third dynasty of Nerva, Trajan, and Hadrian, bind the Flavians to their J
APA, Harvard, Vancouver, ISO, and other styles
6

III, Herbert. "Heat Pumps." In The CRC Press Series in Mechanical and Aerospace Engineering. CRC Press, 2015. http://dx.doi.org/10.1201/b18947-31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Koubaa, Ahmed, and Zoltan Koran. "Effect of Press-Drying Parameters on Paper Properties." In Pulp and Paper Processing. InTech, 2018. http://dx.doi.org/10.5772/intechopen.76508.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Earle, David M. "Pulp Magazines and the Popular Press." In The Oxford Critical and Cultural History of Modernist Magazines. Oxford University Press, 2012. http://dx.doi.org/10.1093/acprof:osobl/9780199545810.003.0011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hoogervorst, Tom G. "Printing, Pulp, and Popularity." In Language Ungoverned. Cornell University Press, 2021. http://dx.doi.org/10.7591/cornell/9781501758225.003.0003.

Full text
Abstract:
This chapter explores how Chinese entrepreneurs managed to secure a prime spot in the Malay printing industry. It elaborates on the interdependence of mass media and vernacular language. The chapter first situates the emergence of the SinoMalay press in the broader constellation of popular printing in Asia, which took shape in the mid-nineteenth century. The popularity of SinoMalay depended in part on the serialized stories they published, some of which were translated Chinese tales. The chapter then shifts to discuss how Malay printing industry diversified during the 1910s when it came to ser
APA, Harvard, Vancouver, ISO, and other styles
10

Herbert, Rosemary. "Lester Dent (1905–1959)." In Murder on Deck! Oxford University PressNew York, NY, 1998. http://dx.doi.org/10.1093/oso/9780195086034.003.0005.

Full text
Abstract:
Abstract It seems fitting that Lester Dent made a living as a night-shift telegrapher in Tulsa, Oklahoma, sending out words at high speeds for the Associated Press, when he decided to try his hand at writing. A coworker had sold a story to a magazine for handsome pay, and Dent, who at age twenty had given up his notion of becoming a banker when he learned that telegraphers earned more, was attracted to writing when he saw money in it. Telegraphing by night and writing rapidly by day for pay-by-the-word pulp magazines, Dent wrote up to 140,000 words a month during his next, most energetic decad
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pump Press"

1

Li, Bryan, Isaac Severinsen, Wei Yu, Timothy Walmsley, and Brent Young. "Twin Roll Press Washer Blockage Prediction: A Pulp and Paper Plant Case Study." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.185260.

Full text
Abstract:
The pulp and paper industry has significant potential to reduce its carbon footprint by optimizing energy and water usage, contributing to global efforts toward net-zero emissions. A critical unit operation in this industry is pulp washing using twin roll press washers, which enhance pulp quality. The filtrate from this unit operation can be concentrated and combusted to generate a significant amount of energy for the plant and nearby industries. However, these washers are prone to blockages that disrupt production and decrease energy efficiency. Despite their importance, models for managing b
APA, Harvard, Vancouver, ISO, and other styles
2

Apostolellis, Panagiotis, Marjee Chmiel, and Doug A. Bowman. ""Pump that press!"." In IDC '18: Interaction Design and Children. ACM, 2018. http://dx.doi.org/10.1145/3202185.3202736.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Teixeira, Paulo Leonel, Waldir Vianna, Ricardo D. Penteado, Petter Krus, and Victor Juliano De Negri. "Pressure Modeling and Analysis of a Synchronized Hydraulic Press Brake With Variable-Speed Pump." In ASME/BATH 2015 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/fpmc2015-9634.

Full text
Abstract:
This paper presents a theoretical–experimental pressure analysis of a hydraulic press brake with synchronized cylinders. In this machine, the motion of each cylinder is controlled by independent variable-speed electrical motors. This design has many benefits over traditional solutions using hydraulic proportional valves, such as higher energetic efficiency, nonrequirement of a heat exchanger, lower oil-cleanliness requirement, and reduced audible noise. However, a critical characteristic of the press brake is the use of double acting cylinders with large rods controlled by a pump in a closed c
APA, Harvard, Vancouver, ISO, and other styles
4

Wehrli, Alex. "Energy Efficiency Of Press Drives - A Closer Look." In World Powder Metallurgy 2022 Congress & Exhibition. EPMA, 2022. http://dx.doi.org/10.59499/wp225367791.

Full text
Abstract:
Energy cost and overall equipment efficiency have triggered the development of large electric powder compacting presses.Additionally, several OEMs have announced the implementation of stronger regulations in their supply chain with the aim to reduce the grey energy.With the increased complexity and precision of PM parts, hydraulic CNC presses have replaced the mechanical presses. By implementing high|low-pressure systems, fast movement actuators and intelligent pump technology, the energy efficiency was increased, but there remains a very high energy demand compared to the actual net energy re
APA, Harvard, Vancouver, ISO, and other styles
5

Jing, Yao, Li Bin, Cao Xiaoming, and Zhang Yang. "A+D combined pump-controlled system for the regular forging process of the forging press." In 2015 International Conference on Fluid Power and Mechatronics (FPM). IEEE, 2015. http://dx.doi.org/10.1109/fpm.2015.7337332.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Namazov, Subhan, Taleh Taghiyev та Shahin Mashayev. "Development of Production Technology for the Valve of Steel Drilling Pump Brand of PK08Х4Н5". У 2nd International Scientific-Practical Conference "Machine Building and Energy: New Concepts and Technologies". Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-phqqk6.

Full text
Abstract:
One of the most important issues in the procurement of parts and products by the process of metallurgy is the design of the details of the press-mold. The design should be carried out in such a way that the additional mechanical processing of the purchased parts and products is minimal. The tooling and technological scheme of the press-mold should be selected as might it be economically viable and the mechanical processing stakes are small. For these purposes, in this present study, the valve part of the high-pressure drilling pump НП-720х105, which is widely used in the oil and gas complex, w
APA, Harvard, Vancouver, ISO, and other styles
7

Lethagen, S., A. S. Harris, and I. M. Nilsson. "A NEW DELIVERY SYSTEM FOR DDAVP: CLINICAL EXPERIENCE OF DDAVP SPRAY PUMP IN MILD HAEMOPHILIA A AND vWD TYPE I." In XIth International Congress on Thrombosis and Haemostasis. Schattauer GmbH, 1987. http://dx.doi.org/10.1055/s-0038-1644704.

Full text
Abstract:
Until recently, the reliability and predectibility of the intranasal route of administration of DDAVP has been too poor to recommend it in routine practice.With the development of a new delivery system in the form of a spray puip we have previously shown that absorption and biological effect of DDAVP in volunteers is enhanced(1).In this patient study we conpared intranasal administration of 300 pg DDAVP using a newly developed pre-corrpression spray pinp with intravenous administration of 0.3 - 0.4 pg/kg. We studied 24 patients with mild haemophilia A, 23 with mild vWD Type IA and 8 with Type
APA, Harvard, Vancouver, ISO, and other styles
8

Dharmatilleke, Saman, C. A. Wijayawardhana, N. Okulan, et al. "A Hybrid Microfluidic Mini System Towards a “Lab-on-a-Chip” for Biochemical Immunoassay." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1123.

Full text
Abstract:
Abstract Hand-held, fully automated microfluidic systems have been developed and characterized to perform a magnetic bead-based biochemical immunoassay. The magnetic beads were coated with a polymer on which a dendritic antibody had been prepared to form the basis of a “sandwich” immunoassay for sensing biomolecules. With the press of a button, a complete immunoassay is performed to detect biohazards, and the result of the assay is displayed on a LCD. One system was made by using biocompatible silicone tubing for interconnections between the devices while another system was fabricated on a mic
APA, Harvard, Vancouver, ISO, and other styles
9

Rigoulet, Hana, Silvie Brozova, Jaromir Drapala, and Ales Sliva. "HYDROMETALLURGICAL METHODS OF GALVANIC SLUDGE RECYCLING." In 22nd SGEM International Multidisciplinary Scientific GeoConference 2022. STEF92 Technology, 2022. http://dx.doi.org/10.5593/sgem2022/4.1/s18.25.

Full text
Abstract:
The paper deals with the possibility of obtaining zinc and iron from waste galvanic sludge, which arises during galvanic plating. Galvanic sludges, which contain more significant amounts of heavy metals, form wastes that are suitable for recycling. These arise during the treatment of wastewater from the operation of the electroplating plant. It is a mixture of metal hydroxides, mainly iron, zinc, chromium, and others. The sludge is sedimented in the reaction wells and, after sedimentation, is pumped into the sludge sump. From there, they are drained in a sludge press by a sludge pump. Subseque
APA, Harvard, Vancouver, ISO, and other styles
10

K, Karthikeyan, Aravamuthan S, Akhilsen Nair, Bharani Dharan R, and Vivek Yadav. "High-Fidelity CAE Simulation of 4-Cylinder 4-Stroke Hollow Assembled Camshaft under Multi Axial Load." In WCX SAE World Congress Experience. SAE International, 2023. http://dx.doi.org/10.4271/2023-01-0163.

Full text
Abstract:
<div class="section abstract"><div class="htmlview paragraph">The major area in which the automotive manufacturers are working is to produce high-performance vehicles with lighter weight, higher fuel economy and lower emissions. In this regard, hollow camshafts are widely used in modern diesel and gasoline engines due to their inherent advantages of less rotational inertia, less friction, less weight and better design flexibility. However, the dynamic loads of chain system, valve train and fuel injection pump (if applicable) makes it challenging to design over-head hollow camshafts
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pump Press' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography