Relevant bibliographies by topics / Pumping machinery

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Pumping machinery'

Author: Grafiati
Published: 4 June 2021
Last updated: 31 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pumping machinery.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pumping machinery"

1

Liu, Huiyong, and Qing Zhao. "Review on Energy Conservation of Construction Machinery for Pumping Concrete." Processes 11, no. 3 (2023): 842. http://dx.doi.org/10.3390/pr11030842.

Full text
Abstract:
The excessive consumption of fossil fuel, energy shortage and global warming along with environmental deterioration have increasingly become a global issue. In order to deal with the energy crisis, energy conservation has been developed and applied in vehicles and construction machineries, i.e., excavators, loaders and forklifts. Due to the shortcoming of low efficiency, high-energy consumption and bad exhaust, the energy conservation of construction machinery for pumping concrete is necessary and urgent. This paper aims to carry out a review on energy conservation of construction machinery for pumping concrete. The research methodology comprises a quantitative analysis method and literature investigation method. First, the structure and working principle of construction machinery for pumping concrete are expounded, and energy consumption ways of construction machinery for pumping concrete are analyzed. Then, research developments in the energy conservation of construction machinery for pumping concrete are summarized. Finally, challenges with the energy conservation of construction machinery for pumping concrete are presented.
APA, Harvard, Vancouver, ISO, and other styles
2

TOWLER, ALFRED. "On Pumping Machinery (1897)." Water and Environment Journal 9, S1 (1995): 69–79. http://dx.doi.org/10.1111/j.1747-6593.1995.tb01176.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

SHIMIZU, Yoshiharu. "Sanitary of Food Machinery : Sanitary of Pumping Food Machinery." Journal of the Society of Mechanical Engineers 92, no. 846 (1989): 446–50. http://dx.doi.org/10.1299/jsmemag.92.846_446.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

GIBSON, D. C. "Pumping Machinery in the Mid-1990s." Water and Environment Journal 9, S1 (1995): 81–86. http://dx.doi.org/10.1111/j.1747-6593.1995.tb01177.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Deryaev, Annaguly. "Dual completion operation technology for two gas condensate reservoirs with production lifting by one column of pumping and compressor pipes." Naukovij žurnal «Tehnìka ta energetika» 14, no. 4 (2023): 33–41. http://dx.doi.org/10.31548/machinery/4.2023.33.

Full text
Abstract:
In the context of the active development of gas condensate fields with several reservoirs in the Gogrendag-Ekerem Upland (Korpedje, South Gamyshlja), the study of its technologies is an important area of work. The study aims to optimise the technology of simultaneously separating two gas condensate reservoirs by lifting products with one tubing string to increase hydrocarbon production efficiency. The methods used include the analytical method, functional method, statistical method, synthesis method, and others. In the course of the study, an innovative methodology was developed for the dual completion operation (DCO) of two gas condensate reservoirs, which involves lifting products with a single tubing string. The key element is the refinement of the calculations made. A detailed analysis of the equipment used in the Gogrendag-Ekerem area showed that it can also be effectively used in other regional fields, ensuring the proper functioning of each element above the packer level. At the same time, it is necessary to pay attention to the various individual characteristics of the field to achieve a truly effective configuration of this technology. The new technology incorporates optimised pressure, flow, and control parameters for each reservoir, resulting in increased production efficiency and reduced energy costs. A significant reduction in the negative impact on the environment and an increase in the overall sustainability of the production process have been identified. These features make the proposed technology an important contribution to the development of the oil and gas industry, contributing to more efficient and environmentally sustainable hydrocarbon production and highlighting its potential for application in modern field development. The practical significance of the research lies in the creation of a more efficient and sustainable hydrocarbon production technology, which not only helps to optimise production processes and reduce environmental impact but also provides the industry with a valuable tool to improve overall energy efficiency and sustainability in the face of ever-changing energy requirements and challenges
APA, Harvard, Vancouver, ISO, and other styles
6

Garate-Quispe, Jorge, Marx Herrera-Machaca, Victor Pareja Auquipata, Gabriel Alarcón Aguirre, Sufer Baez Quispe, and Edgar Eloy Carpio-Vargas. "Resilience of Aboveground Biomass of Secondary Forests Following the Abandonment of Gold Mining Activity in the Southeastern Peruvian Amazon." Diversity 16, no. 4 (2024): 233. http://dx.doi.org/10.3390/d16040233.

Full text
Abstract:
Amazon rainforests are critical for providing a wide range of ecosystem services. In the Southeastern Peruvian Amazon; however, goldmining activities are causing severe soil degradation and forest loss. We analyzed aboveground biomass (AGB), forest structure, and species diversity recovery during secondary succession in 179 forest plots. Our study provides the first field-based quantification of AGB recovery following the abandonment by two types of goldmining (heavy machinery and suction pumping) in Madre de Dios (Peru). We found that successional secondary forests in areas subjected to suction pumping were more resilient than those in areas subjected to heavy machinery. After 20 years, mean AGB in suction pumping mining areas had reached 56% of reference forest AGB, while in areas of heavy machinery mining it was only 18%. Mining type, stand age, and distance from the forest edge had a significant effect on AGB. The influence of the distance from the forest edge on AGB varies according to mining type because the effects of species diversity on AGB are mediated by the distance from the forest edge. Our results clearly showed the dynamics of AGB recovery across a secondary succession after goldmining, and the contrasting responses of AGB between the two mining types. Our study disentangles the importance of key factors in forest recovery after mining and improves understanding of the resilience of biomass accumulation in these highly degraded ecosystems.
APA, Harvard, Vancouver, ISO, and other styles
7

Ilott, P. W., and A. J. Griffiths. "Fault diagnosis of pumping machinery using artificial neural networks." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 211, no. 3 (1997): 185–94. http://dx.doi.org/10.1243/0954408971529665.

Full text
Abstract:
Pumping costs within British industry are enormous, with the potential for considerable financial savings through fault diagnosis and condition-based maintenance. Accurate condition monitoring data interpretation is a key requirement in pump fault diagnosis. However, the human skills required to transform monitored data into maintenance information are often unavailable. Artificial neural networks (ANNs) are proposed for automation of this skill in the development of a pumping system decision support tool, the key requirement of which is accurate pump fault diagnosis. The cumulative sum charting procedure was used to establish a knowledge base of fault data for ANN implementation based on historical parameter measurements. Various preprocessing techniques were investigated in relation to generalization ability and convergence rates during the learning phase. Preprocessing predominantly aVected ANN convergence rate, with the quality of training data crucial to generalization ability. ANNs could provide accurate, incipient fault diagnosis of pumping machinery based on real industrial data corresponding to historical pump faults.
APA, Harvard, Vancouver, ISO, and other styles
8

Muntyan, Maria S., Dmitry A. Cherepanov, Anssi M. Malinen, et al. "Cytochrome cbb3 of Thioalkalivibrio is a Na+-pumping cytochrome oxidase." Proceedings of the National Academy of Sciences 112, no. 25 (2015): 7695–700. http://dx.doi.org/10.1073/pnas.1417071112.

Full text
Abstract:
Cytochrome c oxidases (Coxs) are the basic energy transducers in the respiratory chain of the majority of aerobic organisms. Coxs studied to date are redox-driven proton-pumping enzymes belonging to one of three subfamilies: A-, B-, and C-type oxidases. The C-type oxidases (cbb3 cytochromes), which are widespread among pathogenic bacteria, are the least understood. In particular, the proton-pumping machinery of these Coxs has not yet been elucidated despite the availability of X-ray structure information. Here, we report the discovery of the first (to our knowledge) sodium-pumping Cox (Scox), a cbb3 cytochrome from the extremely alkaliphilic bacterium Thioalkalivibrio versutus. This finding offers clues to the previously unknown structure of the ion-pumping channel in the C-type Coxs and provides insight into the functional properties of this enzyme.
APA, Harvard, Vancouver, ISO, and other styles
9

Hristea, Alexandru, Bogdan Tudor, Stefan Sefu, and Gabriela Milian. "Mechano-hydraulic pumping solutions for reduction off energy losses in agricultural mobile machinery." E3S Web of Conferences 180 (2020): 04020. http://dx.doi.org/10.1051/e3sconf/202018004020.

Full text
Abstract:
Hydraulic digital power consists in a hydraulic plant having one or more discreet valued components actively with which we are controlling the system output flow. In this paper authors study a solution of 4 fixed pumps parallel connected. This complex pumping system can achieve 15 flows. The pumping system consists in an electrical single speed motor, 4 fixed pumps, the repartition will achieve with the help of 4 electrohydraulic distributors and an electronic micro-controller. The hydraulic plant was made in our Research Institute in the digital hydraulic laboratory for conducting tests and experiments.
APA, Harvard, Vancouver, ISO, and other styles
10

Aagaard, Anna, Gwen Gilderson, Denise A. Mills, Shelagh Ferguson-Miller, and Peter Brzezinski. "Redesign of the Proton-Pumping Machinery of CytochromecOxidase: Proton Pumping Does Not Require Glu(I-286)." Biochemistry 39, no. 51 (2000): 15847–50. http://dx.doi.org/10.1021/bi0012641.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pumping machinery"

1

Opperman, Adriaan Jacobus. "Analysis of factors influencing the performance of a hydrokinetic coil pump." Thesis, Nelson Mandela Metropolitan University, 2013. http://hdl.handle.net/10948/d1021041.

Full text
Abstract:
A hydrokinetic coil pump (HCP) is described by its name. It is a coil pump driven by the kinetic energy in flowing water. The hydrokinetic energy is converted into mechanical energy by means of a paddle-wheel. The coil pump makes up part of the paddle-wheel and together is called a HCP. The HCP floats in a stream of flowing water while tethered to the bank. The focus of the study was to identify and analyse the factors influencing the HCP. The HCP was then optimized for rural application. Data acquisition took place through experimentation on a full scale experimental platform according to a central composite experimental design. Variables used for the experimentation included; Stream Velocity, Delivery Head, Number of Coils, Discharge, Number of Paddles, Paddle-Wheel rotational speed Overall HCP efficiencies of up to 22 percent were obtained. The efficiency would drop as the stream velocity increased. Stream velocity has been identified as the most influential factor with regards to the variables analysed by this study. The HCP is ideal for rural application. The simplicity of the design ensures reliability as well as an effective water supply solution. The HCP is ideal for slow flowing rivers and can deliver up to 1190ℓ/h to a delivery head of 5m with a stream velocity of 1.2m/s. This is sufficient to supply a small rural community with running water.
APA, Harvard, Vancouver, ISO, and other styles
2

Mainland, Marlene Elise. "Analytical and experimental investigation of an efficient viscous pump." Thesis, Georgia Institute of Technology, 1990. http://hdl.handle.net/1853/15832.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kalim, Azfar. "Utilization of the geared five-bar slider-crank mechanism for positive displacement machines." Thesis, University of Ballarat, 2010. http://researchonline.federation.edu.au/vital/access/HandleResolver/1959.17/41995.

Full text
Abstract:
The conventional slider-crank mechanism which is often employed to drive reciprocating positive displacement machines is not adequate when it is necessary to produce non-uniform reciprocations in order to improve machine performance. Instead, this thesis dicusses the utilisation of the geared five-bar slider-crank mechanism to drive these machines." -- Introduction.<br>Doctor of Philosphy
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, Guang. "A photovoltaic-powered pumping system." Thesis, University of British Columbia, 1989. http://hdl.handle.net/2429/30592.

Full text
Abstract:
This thesis studies the optimal design for a photovoltaic-powered medium-head (30 meters) water pumping system, with the emphasis on improving the efficiency and reducing the maintenance requirements of the electrical subsystem. The reduction of maintenance requirements is realized by replacing the conventional brush-type permanent magnet dc motor with a brushless dc (BLDC) motor. Different BLDC motor control techniques such as position-sensorless operation, sinusoidal and trapezoidal excitations are investigated. The improvement in efficiency is achieved by maximizing the output power from the photovoltaic array and by minimizing the losses in various parts of the electrical sub-system. A microprocessor-based double-loop maximum power tracking scheme is developed for maximization of the photovoltaic array output power. Over 99% utilization factor is achieved for a typical clear day regardless of the season of the year. The system losses are minimized mainly by performing loss analysis and selecting most suitable switching topologies and switching components. Experimental results show that the combined converter-motor efficiency is comparable to those of high-efficiency brush-type dc motor systems.<br>Applied Science, Faculty of<br>Electrical and Computer Engineering, Department of<br>Graduate
APA, Harvard, Vancouver, ISO, and other styles
5

Brown, Daniel F. Jr. "Single crystal piezoelectric pumping using displacement amplification." Thesis, Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/19124.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wilkes, Kevin Wood. "Rotordynamic analysis of circumferentially grooved annular pump seals with turbulent flow and inlet swirl /." This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-12302008-063353/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dean, Patrick T. "Modern control design for a variable displacement hydraulic pump." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/4647.

Full text
Abstract:
Thesis (M.S.)--University of Missouri-Columbia, 2006.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on April 21, 2009) Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
8

Shellenberger, Michael J. C. "Design considerations for variable power split hydraulic drives for industrial applications." Morgantown, W. Va. : [West Virginia University Libraries], 1999. http://etd.wvu.edu/templates/showETD.cfm?recnum=655.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 1999.<br>Title from document title page. Document formatted into pages; contains x, 91 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 68-69).
APA, Harvard, Vancouver, ISO, and other styles
9

Wong, Yuen-wah, and 黃婉華. "Performance prediction model for a solar water pump." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2000. http://hub.hku.hk/bib/B31223722.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Iamonaco, Mark A. "Determination of impeller pumping capacity from laser doppler anemometer (LDA) measurements in an agitated vessel /." Online version of thesis, 1991. http://hdl.handle.net/1850/11005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Pumping machinery"

1

Arasmith, Skeet. Pumps & pumping. ACR Publications,Inc., 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Christopher, Dickenson T., ed. Pumping manual. 9th ed. Elsevier Advanced Technology, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Badr, Hassan M., and Wael H. Ahmed. Pumping Machinery Theory and Practice. John Wiley & Sons Ltd, 2014. http://dx.doi.org/10.1002/9781118932094.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Welch, Kimo M. Capture pumping technology: An introduction. Pergamon Press, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kasenow, Michael. Variable pumping rate solutions. Water Resources Publications, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

International, Warman. Warman slurry pumping handbook. 4th ed. Warman International, Inc., 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Committee, International Pipe Trades Joint Training. Pumps / International Pipe Trades Joint Training Committee. International Pipe Trades Joint Training Committee (United Association Building, 901 Mass. Ave., NW, Washington DC 20001), 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Timoshenko, G. M. Nauchnye osnovy proektirovanii͡a︡ i ėkspluatat͡s︡ii nasosnykh ustanovok v perekhodnykh rezhimakh. Gol. izd-vo izdatelʹskogo obʺedinenii͡a︡ "Vyshcha shkola", 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sanks, Robert L. Improvements in pump intake basin design: Project summary. U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Technology Information Forecasting and Assessment Council (India), ed. Techno market survey on industrial pumps & motor systems. Technology Information Forecasting and Assessment Council, Dept. of Science and Technology, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Pumping machinery"

1

Adams, Maurice L. "Pumping Fluid-Solid-Particle Mixtures." In Rotating Machinery Research and Development Test Rigs. CRC Press, 2017. http://dx.doi.org/10.1201/9781315116723-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lu, Linguang, Jiren Zhou, and Rentian Zhang. "Optimum Hydraulic Design of Two-Way Inlet Conduit of Wangyuhe Pumping Station." In Hydraulic Machinery and Cavitation. Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-010-9385-9_51.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Khélifi, Kamel, Mohamed-Lamjed Bouazizi, Emeline Sadoulet, Rachid Nasri, and Noureddine Bouhaddi. "Parametric Study on Energy Pumping of Mdof System Using Multiple Dynamic Absorbers." In Condition Monitoring of Machinery in Non-Stationary Operations. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28768-8_62.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tochev, Emil, Harald Pfifer, and Svetan Ratchev. "Indirect System Condition Monitoring Using Online Bayesian Changepoint Detection." In IFIP Advances in Information and Communication Technology. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72632-4_6.

Full text
Abstract:
AbstractThis paper presents a method for online vibration analysis and a simple test bench analogue for the solder pumping system in an industrial wave-soldering machine at a Siemens factory. A common machine fault is caused by solder build-up within the pipes of the machine. This leads to a pressure drop in the system, which is replicated in the test bench by restricting the flow of water using a gate valve. The pump’s vibrational response is recorded using an accelerometer. The captured data is passed through an online Bayesian Changepoint Detection algorithm, adapted from existing literature, to detect the point at which the change in flow rate affects the pump, and thus the PCB assembly capability of the machine. This information can be used to trigger machine maintenance operations, or to isolate the vibrational response indicative of the machine fault.
APA, Harvard, Vancouver, ISO, and other styles
5

Dumitru, N., N. Craciunoiu, R. Malciu, and N. Ploscaru. "Elastodynamic Analysis of the Sucker Rod Pumping System Mechanism." In New Trends in Mechanism and Machine Science. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09411-3_38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bekgulyan, Sumbat, Simon Feldmeth, and Frank Bauer. "Influence of Low Temperature on the Pumping Rate of Radial Lip Seals." In Machine and Industrial Design in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-88465-9_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bouyer, Patricia, Nicolas Markey, and Ocan Sankur. "Robust Model-Checking of Timed Automata via Pumping in Channel Machines." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-24310-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Feng, Jilin, Maofa Wang, Yiheng Yang, et al. "Fault Diagnosis of Sucker-Rod Pumping System Using Support Vector Machine." In Communications in Computer and Information Science. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-31968-6_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Herrera, Gerardo, and Paulina Morillo. "Benchmarking of Supervised Machine Learning Algorithms in the Early Failure Prediction of a Water Pumping System." In Communication, Smart Technologies and Innovation for Society. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-4126-8_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Remache-Vinueza, Byron, Jefferson Castro-Ramírez, and Mireya Zapata. "Design of a Human Machine Interface for Programming and Testing Adjustable Frequency Drives for Constant Pressure Pumping Applications." In Human Systems Engineering and Design III. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-58282-1_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pumping machinery"

1

Zhu, Honggeng, Rentian Zhang, Dongsheng Deng, et al. "Numerical Simulation of Tubular Pumping Systems with Different Regulation Methods." In THE 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY. AIP, 2010. http://dx.doi.org/10.1063/1.3464854.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhou, Bao. "Methods Discussing to Improve The Efficiency of Pumping Unit Well System." In 2016 4th International Conference on Machinery, Materials and Computing Technology. Atlantis Press, 2016. http://dx.doi.org/10.2991/icmmct-16.2016.174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hao Yan, Wensheng Zhao, Peng Lin, Yuanwei Wu, and Meiqing Liu. "Study on the hydraulic performance of large axial-flow pumping stations." In 2014 ISFMFE - 6th International Symposium on Fluid Machinery and Fluid Engineering. Institution of Engineering and Technology, 2014. http://dx.doi.org/10.1049/cp.2014.1194.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jinxian, Qiu, Cheng Jilin, Luo Jinyao, et al. "Analysis of Variable Speed Optimization Operation Effect of Different-type Pumps in Jiangdu Pumping Station." In THE 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY. AIP, 2010. http://dx.doi.org/10.1063/1.3464891.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huilong Chen, Qiangbo Wu, Binjuan Zhao, Cheng Xu, and Muzi Zuo. "The fluid-structure interaction study of spiral groove upstream pumping mechanical seal." In 2014 ISFMFE - 6th International Symposium on Fluid Machinery and Fluid Engineering. Institution of Engineering and Technology, 2014. http://dx.doi.org/10.1049/cp.2014.1184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lihua, Zhang, Chang Jilin, Zhang Rentian, et al. "Research on Optimal Operation by Adjusting Blade Angle in Jiangdu No. 4 Pumping Station of China." In THE 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY. AIP, 2010. http://dx.doi.org/10.1063/1.3464869.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rentian, Zhang, Zhu Honggeng, Jaap Arnold, et al. "Development and Optimized Design of Propeller Pump System & Structure with VFD in Low-head Pumping Station." In THE 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY. AIP, 2010. http://dx.doi.org/10.1063/1.3464853.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yi, Gong, Cheng Jilin, Zhang Lihua, et al. "Study on Operation Optimization of Pumping Station’s 24 Hours Operation under Influences of Tides and Peak-Valley Electricity Prices." In THE 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY. AIP, 2010. http://dx.doi.org/10.1063/1.3464852.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cheng, Jilin, Lihua Zhang, Rentian Zhang, et al. "Optimal Operation of Variable Speed Pumping System in China’s Eastern Route Project of S-to-N Water Diversion Project." In THE 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY. AIP, 2010. http://dx.doi.org/10.1063/1.3464855.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shude Bi, Meiqing Liu, Xinping Long, and Maosen Xu. "Analysis on the flow field of inlet structure of Xingshipo pumping station by CFD method." In 2014 ISFMFE - 6th International Symposium on Fluid Machinery and Fluid Engineering. Institution of Engineering and Technology, 2014. http://dx.doi.org/10.1049/cp.2014.1253.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Pumping machinery"

1

Singh, Anjali. Autoclave Sterilizers 101: How They Work Plus Safety Tips. ConductScience, 2022. http://dx.doi.org/10.55157/cs20220717.

Full text
Abstract:
An autoclave is a machine used in labs to sterilize items by applying heat and pressure to kill pathogens like bacteria and viruses. It uses saturated steam to destroy contaminants, making it useful in various fields including dentistry and microbiology. Autoclaves have evolved from basic steam sterilizers to advanced versions. They work by removing air, pumping in steam under pressure, and maintaining a high temperature to sterilize items. Safety precautions include proper training, not overcrowding, and using autoclavable materials. Not everything can be autoclaved; materials like glass, metals, and certain plastics are suitable, while flammable or toxic substances are not. Proper usage and maintenance are vital to prevent accidents.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pumping machinery' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography