Relevant bibliographies by topics / Qualification characterization

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Qualification characterization'

Author: Grafiati
Published: 7 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Qualification characterization.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Qualification characterization"

1

Klewer, Christian, Frank Kuechenmeister, Jens Paul, et al. "Package Qualification Envelope for 22FDX® Technology." International Symposium on Microelectronics 2019, no. 1 (2019): 000169–75. http://dx.doi.org/10.4071/2380-4505-2019.1.000169.

Full text
Abstract:
Abstract This article describes the methodology used to derive the 22FDX® Fully-Depleted Silicon-On-Insulator (FDSOI) Chip Package Interaction (CPI) qualification envelope. In the first part it is discussed how the individual market segments influence the technology features and offerings, including BEOL stacks and package types. In the following, the criteria used for the selection of BEOL stacks, die and package sizes and the interconnect type for the qualification envelope are summarized and explained. The three CPI qualification stages and related characterization methods are presented. CP
APA, Harvard, Vancouver, ISO, and other styles
2

Perestiuk, Natalia. "Problems of legal qualification in private international law: doctrine, case law and Ukrainian law." Ukrainian Journal of International Law 3 (September 30, 2020): 129–39. http://dx.doi.org/10.36952/uail.2020.3.129-139.

Full text
Abstract:
In this paper, the author observes the historical origins and development of doctrines of qualification (characterization) in private international law. Analyzing different approaches as to the place of qualification in the process of operation with a choice-of-law rule, as to its scope and subject, as well as to the distinction between qualification and interpretation processes, the author concludes on the controversial nature of this issue, as well as of the alternative views on the qualification subject and approaches to qualification that may be followed by a judge. Considering current Ukr
APA, Harvard, Vancouver, ISO, and other styles
3

Mitrevska, Ivana, Ema Kikovska-Stojanovska, Gjorgji Petrusevski, Marina Chachorovska, Suzan Memed-Sejfulah, and Sonja Ugarkovic. "Identification and Structural Characterization of Unidentified Impurity in Bisoprolol Film-Coated Tablets." Advances in Chemistry 2017 (March 23, 2017): 1–16. http://dx.doi.org/10.1155/2017/3047517.

Full text
Abstract:
The aim of this study is the identification, structural characterization, and qualification of a degradation impurity of bisoprolol labeled as Impurity RRT 0.95. This degradation product is considered as a principal thermal degradation impurity identified in bisoprolol film-coated tablets. The impurity has been observed in the stress thermal degradation study of the drug product. Using HPLC/DAD/ESI-MS method, a tentative structure was assigned and afterwards confirmed by detailed structural characterization using NMR spectroscopy. The structure of the target Impurity RRT 0.95 was elucidated as
APA, Harvard, Vancouver, ISO, and other styles
4

Knechtel, Roy. "Characterization and Qualification of Wafer-Bonded MEMS Devices." ECS Transactions 16, no. 8 (2019): 417–24. http://dx.doi.org/10.1149/1.2982895.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Larabi-Harfouche, K., F. Dari, A. Herrati, G. Medkour-Boushaki, and Z. Lounis-Mokrani. "Characterization and qualification of a CRNA eye dosimeter." Perspectives in Science 12 (September 2019): 100402. http://dx.doi.org/10.1016/j.pisc.2019.100402.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shaneyfelt, Marty R., James R. Schwank, Paul E. Dodd, et al. "Implications of Characterization Temperature on Hardness Assurance Qualification." IEEE Transactions on Nuclear Science 53, no. 6 (2006): 3132–38. http://dx.doi.org/10.1109/tns.2006.886009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mohebi, H. "Lagrange multiplier characterizations of constrained best approximation with nonsmooth nonconvex constraints." Filomat 34, no. 14 (2020): 4669–84. http://dx.doi.org/10.2298/fil2014669m.

Full text
Abstract:
In this paper, we consider the constraint set K := {x ? Rn : gj(x)? 0,? j = 1,2,...,m} of inequalities with nonsmooth nonconvex constraint functions gj : Rn ? R (j = 1,2,...,m).We show that under Abadie?s constraint qualification the ?perturbation property? of the best approximation to any x in Rn from a convex set ?K := C ? K is characterized by the strong conical hull intersection property (strong CHIP) of C and K, where C is an arbitrary non-empty closed convex subset of Rn: By using the idea of tangential subdifferential and a non-smooth version of Abadie?s constraint qualification, we do
APA, Harvard, Vancouver, ISO, and other styles
8

Calò, C., A. Lay-Ekuakille, P. Vergallo, et al. "Measurements and Characterization of Photovoltaic Modules for Tolerance Verification." International Journal of Measurement Technologies and Instrumentation Engineering 1, no. 2 (2011): 73–83. http://dx.doi.org/10.4018/ijmtie.2011040106.

Full text
Abstract:
One of the most important aspects of photovoltaic modules is reliability for future uses, that is, a certain module will last certain number of years in use (generally 30 or 35 years). Reliability yields from excellent qualification tests on photovoltaic (PV) modules. Testing for reliability identifies unknown failure mechanisms and whether modules are susceptible to known failure mechanisms. This paper illustrates techniques of outdoor measurements and qualification characterization to know PV module conditions for commercial uses. Matrix methods are used for energy prediction. Failure materi
APA, Harvard, Vancouver, ISO, and other styles
9

Humer, K., R. Prokopec, H. W. Weber, H. Fillunger, and R. K. Maix. "Characterization and qualification of advanced insulators for fusion magnets." Fusion Engineering and Design 88, no. 5 (2013): 350–60. http://dx.doi.org/10.1016/j.fusengdes.2013.03.074.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Colina-Delacqua, L., M. Redolfi, K. Ouaras, et al. "Qualification of uniform large area multidipolar ECR hydrogen plasma." Physics of Plasmas 29, no. 4 (2022): 043508. http://dx.doi.org/10.1063/5.0083341.

Full text
Abstract:
The design and characterization of a multi-dipolar microwave electron cyclotron resonance (ECR) hydrogen plasma reactor are presented. In this configuration, 16 ECR sources are disposed uniformly along the azimuthal direction at a constant distance from the center of a cylindrical reactor. Several plasma diagnostics have been used to determine key parameters such as neutral species temperature; electron density and temperature; and H+, H2+, and H3+ ion energy distributions. The experimental characterization is supported by electromagnetic and magnetostatic field simulations as well as Particle
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Qualification characterization"

1

Byron, Andrew James. "Qualification and characterization of metal additive manufacturing." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/104315.

Full text
Abstract:
Thesis: M.B.A., Massachusetts Institute of Technology, Sloan School of Management, 2016. In conjunction with the Leaders for Global Operations Program at MIT.<br>Thesis: S.M. in Engineering Systems, Massachusetts Institute of Technology, Department of Aeronautics and Astronautics, 2016. In conjunction with the Leaders for Global Operations Program at MIT.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 119-123).<br>Additive manufacturing (AM) has emerged as an effective and efficient way to digitally manufacture complicated structures. Raytheon Missile Sy
APA, Harvard, Vancouver, ISO, and other styles
2

Rosenblatt, Nicolas. "Characterization of cylinder liner by image analysis." Thesis, Halmstad University, School of Business and Engineering (SET), 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-929.

Full text
Abstract:
<p>The cylinder liners surface is of major importance in an engine since it interacts with the piston rings and creates a tribologic system. This tribologic system has to be qualified and controlled in order to understand and control wear, oil consumption and shelf life. In this purpose, a program has been created in order to analyze SEM pictures and from them qualify the surface.</p><p>The aim of the project presented here has been to improve the preliminary steps leading to the image computation by standardizing the picture acquisition and improve the image filtering.</p>
APA, Harvard, Vancouver, ISO, and other styles
3

Lagadec, Alain. "De l'interprétation des clauses contractuelles à la qualification du contrat." Thesis, Toulon, 2017. http://www.theses.fr/2017TOUL0112/document.

Full text
Abstract:
De la volonté des parties de s’accorder sur les éléments essentiels d’un contrat, naît tout un processus contractuel qui se traduit par la création d’obligations, éléments susceptibles d’être à l’origine d’un désaccord. Dès lors qu’un juge est saisi d’un litige, les opérations d’interprétation et de qualification du contrat litigieux auxquelles il se consacre se définissent par une double fonction. Dans un premier temps, l’interprétation du contenu du contrat permet au juge de repérer les éléments de fait qui ont été déterminants de la volonté des parties de contracter. Dans un second temps, u
APA, Harvard, Vancouver, ISO, and other styles
4

Lagadec, Alain. "De l'interprétation des clauses contractuelles à la qualification du contrat." Electronic Thesis or Diss., Toulon, 2017. http://www.theses.fr/2017TOUL0112.

Full text
Abstract:
De la volonté des parties de s’accorder sur les éléments essentiels d’un contrat, naît tout un processus contractuel qui se traduit par la création d’obligations, éléments susceptibles d’être à l’origine d’un désaccord. Dès lors qu’un juge est saisi d’un litige, les opérations d’interprétation et de qualification du contrat litigieux auxquelles il se consacre se définissent par une double fonction. Dans un premier temps, l’interprétation du contenu du contrat permet au juge de repérer les éléments de fait qui ont été déterminants de la volonté des parties de contracter. Dans un second temps, u
APA, Harvard, Vancouver, ISO, and other styles
5

El, Fgaier Faycal. "Conception, production et qualification des briques en terre cuite et en terre crue." Thesis, Ecole centrale de Lille, 2013. http://www.theses.fr/2013ECLI0023/document.

Full text
Abstract:
La réduction de la consommation énergétique dans le secteur de bâtiments présente aujourd’hui une priorité primordiale dans les politiques des pays industrialisés. En France, le secteur du bâtiment consomme environ 43 % de l’énergie finale et contribue pour près d’un quart aux émissions nationales de gaz à effet de serre [ADEME]. Il se positionne comme un acteur clé pour parvenir à résoudre les inquiétants défis environnementaux auxquels nous devons faire face. Face à ces véritables défis, l’augmentation des niveaux d’exigence des réglementations thermiques s’est poursuivie et intensifiée pend
APA, Harvard, Vancouver, ISO, and other styles
6

Cristalli, Carlo <1983&gt. "Development, mechanical characterization and qualification in liquid lead of stainless steels for structural applications in the future fission and fusion nuclear reactors." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2022. http://amsdottorato.unibo.it/10058/1/Cristalli_Carlo_tesi.pdf.

Full text
Abstract:
The research activity carried out in the Brasimone Research Center of ENEA concerns the development and mechanical characterization of steels conceived as structural materials for future fission reactors (Heavy Liquid Metal IV Generation reactors: MYRRHA and ALFRED) and for the future fusion reactor DEMO. Within this framework, two parallel lines of research have been carried out: (i) characterization in liquid lead of steels and weldings for the components of the IV Generation fission reactors (GIV) by means of creep and SSRT (Slow Strain Rate Tensile) tests; (ii) development and screening on
APA, Harvard, Vancouver, ISO, and other styles
7

Markel, Ingo Jürgen [Verfasser], and H. J. [Akademischer Betreuer] Seifert. "Characterization and qualification of damage-tolerant ceramic matrix composites for structural applications in hot gas turbines / Ingo Jürgen Markel ; Betreuer: H. J. Seifert." Karlsruhe : KIT-Bibliothek, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021090105000551964861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Licheri, Susanna. "Offline study of next generation EUV pellicle materials and performances : From experimental design to material characterization." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254554.

Full text
Abstract:
Lithography is the most crucial step in the semiconductor microfabrication workflow. Continuous features size shrinking co-occurs with the reduction of the exposure wavelength: a move from 193 nm light to extreme ultra-violet (EUV) at 13.5 nm is performed. The change poses a vast number of challenges that have been overcome in the past years. Among the others, the protection of the reticle front side from defects is crucial. Shielding can be achieved by means of EUV pellicles: large area (~150 cm2), freestanding, ultra-thin (~50 nm) membranes that prevent particles from landing on the reticle
APA, Harvard, Vancouver, ISO, and other styles
9

Stem, Nair. "Células solares de silício de alto rendimento: otimizações teóricas e implementações experimentais utilizando processos de baixo custo." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/3/3140/tde-02042008-113959/.

Full text
Abstract:
O trabalho realizado nesta tese esteve apoiado em dois objetivos principais. O primeiro centrado na otimização das etapas e processos de fabricação de células solares de silício de alto rendimento envolvendo redução de custos. O segundo objetivo foi direcionado na implementação de células solares eficientes e não dependentes do armadilhamento de impurezas através da difusão de alumínio. Para levar a cabo estes objetivos de forma planejada, o trabalho dividiu-se em otimizações teóricas e implementações experimentais. As otimizações teóricas foram realizadas utilizando dois programas: um program
APA, Harvard, Vancouver, ISO, and other styles
10

Kalaani, Adrian. "La fusion de sociétés en droit interne et international : contribution à la notion de "contrat-organisation"." Thesis, Paris 2, 2015. http://www.theses.fr/2015PA020054.

Full text
Abstract:
La fusion est l’opération par laquelle une ou plusieurs sociétés transfèrent, par la suite de leur dissolution sans liquidation, leur patrimoine à une société préexistante ou nouvellement créée; ce transfert s’opère moyennant la distribution de parts sociales aux associés de la société dissoute. En adoptant cette définition, le législateur européen et son homologue français ont souligné les effets principaux de la fusion en demeurant toutefois silencieux sur sa nature juridique. La doctrine et la jurisprudence se sont relayées afin de lever le doute qui régnait en la matière. Finalement, il se
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Qualification characterization"

1

IPC-9202A Material and Process Characterization/Qualification Test Protocol for Assessing Electrochemical Performance Using the IPC-B-52 Test Assembly. IPC International, 2022.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

IPC-9202A-JP Material and Process Characterization/Qualification Test Protocol for Assessing Electrochemical Performance Using the IPC-B-52 Test Assembly (Japanese). IPC International, 2023.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lampman, Steve, ed. Weld Integrity and Performance. ASM International, 1997. http://dx.doi.org/10.31399/asm.tb.wip.9781627083591.

Full text
Abstract:
Weld Integrity and Performance is a convenient reference and sourcebook for anyone involved in the application, fabrication, or assessment of welded structures. It provides detailed information on relevant topics including weld solidification, weldability testing, weld characterization, discontinuities and imperfections, cracking phenomena, inspection and evaluation techniques, fatigue and fracture control, fracture mechanics, fitness-for-service testing, repair welding, and weld corrosion. An entire section, the largest by far in the book, covers the basic metallurgy and engineering propertie
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Qualification characterization"

1

Fabry, A., L. Leenders, R. Menil, et al. "VENUS PWR Engineering Mock-Up: Core Qualification, Neutron and Gamma Field Characterization." In Reactor Dosimetry. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-010-9726-0_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fabry, A., L. Leenders, R. Menil, et al. "Venus PWR Engineering Mock-Up: Core Qualification, Neutron and Gamma Field Characterization." In Reactor Dosimetry. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5378-9_77.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Calò, C., A. Lay-Ekuakille, P. Vergallo, et al. "Measurements and Characterization of Photovoltaic Modules for Tolerance Verification." In Advanced Instrument Engineering. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4165-5.ch011.

Full text
Abstract:
One of the most important aspects of photovoltaic modules is reliability for future uses, that is, a certain module will last certain number of years in use (generally 30 or 35 years). Reliability yields from excellent qualification tests on photovoltaic (PV) modules. Testing for reliability identifies unknown failure mechanisms and whether modules are susceptible to known failure mechanisms. This paper illustrates techniques of outdoor measurements and qualification characterization to know PV module conditions for commercial uses. Matrix methods are used for energy prediction. Failure materi
APA, Harvard, Vancouver, ISO, and other styles
4

Bizioli, Gianluigi. "Qualification Conflicts and Tax Treaties." In The Oxford Handbook of International Tax Law. Oxford University Press, 2023. http://dx.doi.org/10.1093/oxfordhb/9780192897688.013.18.

Full text
Abstract:
Abstract This chapter examines qualification conflicts and tax treaties. Qualification conflicts in tax treaty law raise two different issues. The first involves defining the boundaries of the topic and, in particular, the differences and the overlapping of the contiguous terms and activities of interpretation, classification, and characterization. This issue is common to every legal order and the conflicts are always due to a varying interpretation by two jurisdictions. The second, differently, involves the consequences of these conflicts on international taxation, in particular double taxati
APA, Harvard, Vancouver, ISO, and other styles
5

Georgin, J., A. Limam, J. Reynoard, and D. Nguyen. "Characterization and qualification of reinforcement by composite of the reinforced concrete labs." In Improvement of Buildings' Structural Quality by New Technologies. Taylor & Francis, 2005. http://dx.doi.org/10.1201/9780203970843.ch81.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Characterization and qualification of reinforcement by composite of the reinforced concrete labs." In Improvement of Buildings' Structural Quality by New Technologies. CRC Press, 2005. http://dx.doi.org/10.1201/9780203970843-83.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mabrouk, Mohamed. "RF and Microwave Test of MMICs from Qualification to Mass Production." In Advances in Monolithic Microwave Integrated Circuits for Wireless Systems. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-60566-886-4.ch011.

Full text
Abstract:
This chapter describes some basic characteristic responses that must be known for each Monolithic Microwave Integrated Circuits. The main parameters such Return Loss, Insertion Losses or Gain, Power at 1dB compression, InterModulation Products or Noise Figure are very important and have to be measured before using the device in final applications. Basic rules of Test and Measurement in RF and Microwaves, as well for characterization on benches as for high volume production using Automatic Test Equipments installed in test platforms, are summarized for helping today’s test engineers to develop
APA, Harvard, Vancouver, ISO, and other styles
8

Ibáñez Jiménez, Javier, and Eva María Ibáñez Jiménez. "NFT Legal and Market Challenges in Permissioned Blockchain Networks." In Blockchain [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.106460.

Full text
Abstract:
This work analyses the distributed-ledger technology as a digital framework for the representation and exercise of tokenized rights, as well as the private-law characterization and EU regimen applicable to non-fungible tokens (NFTs). After a brief introduction to permissioning in blockchain and to permissioned distributed ledgers (PDLs), we reflect on its relevance to NFT contracting and markets, focusing on the legal and economic consequences of NFT trading in PDLs, with particular emphasis on public permissioned networks (PPDLs). We then discuss key challenges about law-compliant trading for
APA, Harvard, Vancouver, ISO, and other styles
9

Ramos, Carlos Alberto Santos, Nair Stem, and Manuel Cid Sánchez. "Use of low-doped emitters in the characterization of sil-icon slides." In UNITING KNOWLEDGE INTEGRATED SCIENTIFIC RESEARCH FOR GLOBAL DEVELOPMENT. Seven Editora, 2023. http://dx.doi.org/10.56238/uniknowindevolp-134.

Full text
Abstract:
This work has as main objective the qualification of the silicon used as a substrate in the manufac-ture of solar cells, through the technique of photoconductive decay (technique widely used in the sectors of research and industrial production of this type of devices). The use of this technique together with the passivation of surfaces, through the formation of emit-ters gently doped with phosphorus (n+pn+ structure), allows the extraction of parameters that will assist the process engineer in the tasks of simulation and theoretical-experimental optimiza-tion of the steps that make up the comp
APA, Harvard, Vancouver, ISO, and other styles
10

Hang Bob Yung, Ching, Lung Fung Tse, Wing Fung Edmond Yau, and Sze Yi Mak. "Additive Manufacturing in Customized Medical Device." In Advanced Additive Manufacturing [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.101139.

Full text
Abstract:
The long-established application of rapid prototyping in additive manufacturing (AM) has inspired a revolution in the medical industry into a new era, in which the clinical-driven development of the customized medical device is enabled. This transformation could only be sustainable if clinical concerns could be well addressed. In this work, we propose a workflow that addresses critical clinical concerns such as translation from medical needs to product innovation, anatomical conformation and execution, and validation. This method has demonstrated outstanding advantages over the traditional man
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Qualification characterization"

1

Keasler, Victor, Brian Bennett, Ben Bromage, et al. "Bacterial Characterization and Biocide Qualification for Full Wellstream Crude Oil Pipelines." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10250.

Full text
Abstract:
Abstract An 18-year-old offshore pipeline system in Nigeria was found to have severe internal corrosion, which was attributed to microbiologically influenced corrosion (MIC). MIC became the predominant factor after the field matured and water cut increased. The inability to pig the majority of the system, the difficulties associated with treating sump tanks that likely harbor large quantities of bacteria, and results from pipeline intelligent tool inspections triggered an evaluation of potential treatment alternatives that could provide enhanced solids and biofilm penetration. The operator and
APA, Harvard, Vancouver, ISO, and other styles
2

Levinsky, A., Z. Miller, M. Fratoni, et al. "First Results of Uranium Nitride Fuel Characterization Using Accelerated Fuel Qualification Process." In International Conference on Physics of Reactors (PHYSOR 2024). American Nuclear Society, 2024. http://dx.doi.org/10.13182/physor24-43744.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tator, Kenneth B. "Qualification Testing of Fusion Bonded Epoxy Coatings for Pipeline Exteriors." In SSPC 2006. SSPC, 2006. https://doi.org/10.5006/s2006-00072.

Full text
Abstract:
Abstract The selection of a coating for suitable use on the exterior of a pipeline is an important consideration due to the safety and cost consequences of potential corrosion. Because there are numerous fusion bonded epoxy (FBE) mainline and field joint coating systems available, the selection of the optimum coating system is as much an art as a science. This paper discusses some of the variables and constraints to be considered in the selection of FBE mainline and field joint coating systems; FBE coating systems in common use; the failure mechanism of pipeline coatings with cathodic protecti
APA, Harvard, Vancouver, ISO, and other styles
4

Kiser, Samuel, Martin Caruso, Rengang Zhang, and Brian Baker. "Development and Characterization of UNS N06055 Nickel Alloy Welding Product (New Applications and Additional Technical Data)." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4223.

Full text
Abstract:
Abstract UNS(1) N06055 alloy has been evaluated for resistance to primary water stress corrosion cracking (PWSCC), ductility dip cracking (DDC), and solidification cracking (hot-cracking). Metallurgical stability after exposure to temperatures above nuclear operating temperatures has been evaluated by x-ray diffraction by the Ohio State University (OSU)(2) and KAPL (Knolls Atomic Power Laboratory)(3). Additional mechanical properties have been predicted and compared to values measured from a weldment, and are reported after post weld heat treatment at 621°C (1150°F) for 48 hours. New applicati
APA, Harvard, Vancouver, ISO, and other styles
5

Bäßler, Ralph, Oleksandra Yevtushenko, and Heike Hattendorf. "Electrochemical Characterization of High Alloyed Materials in Molten Salts for Solar Energy Applications." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05659.

Full text
Abstract:
Abstract Within the last years the use of feasible alternative energy sources has risen and is going to replace fossil resources more and more. Nevertheless, service conditions in solar facilities are due to the chemical composition of heat transmission media and temperatures, in many cases, extreme in terms of corrosion. Since the construction of power plants shall be economical with maximum life service, materials selection based on preliminary material qualification is essential to guarantee a secure and reliable operation of those facilities. The materials selection depends on the operatio
APA, Harvard, Vancouver, ISO, and other styles
6

Ellicks, David, Fritz Friedersdorf, Matt Merrill, and Patrick Kramer. "Continuous Monitoring of Atmospheric Corrosion and Coating Degradation." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-08834.

Full text
Abstract:
Abstract Organic coating systems with corrosion inhibitors are the primary means of protecting structures from atmospheric corrosion in harsh environments. Environmental compliance and a desire for increased performance continue to drive coating development and new product introductions. Current corrosion tests and measurement methods for qualification and selection of aerospace coatings often provide poor correlation to service environment performance and do not assess the highest risk failure modes of localized corrosion, galvanic attack, and environment assisted cracking. Furthermore, tradi
APA, Harvard, Vancouver, ISO, and other styles
7

Ferrier, Bernard, Robert Ernst, Ajay Sehgal, and Saiah Kim. "Deck Motion Interface for MQ-8C Fire Scout Embarked Aviation." In Vertical Flight Society 72nd Annual Forum & Technology Display. The Vertical Flight Society, 2016. http://dx.doi.org/10.4050/f-0072-2016-11574.

Full text
Abstract:
This paper provides a discussion of the challenges associated with embarking the MQ-8C Fire Scout (converted Bell 407) system onboard ships, focusing on the launch and recovery (L&amp;R) process and equipment. The baseline version of Fire Scout, MQ-8C, along with all its improved derivatives is required to undergo ship suitability assessments in the form of dynamic interface (DI) testing, also known as helicopter-ship qualification analysis, aboard ship. DI testing evaluates all aspects of shipboard helicopter compatibility such as adequacy, effectiveness and safety of shipboard aviation suppo
APA, Harvard, Vancouver, ISO, and other styles
8

Cappuccini, Filippo, Domenico Di Pietro, Angelo Donato, and Antonella Dimatteo. "Exploring the Corrosion Behavior of Alloy UNS N07718 Manufactured by Additive Manufacturing under Different Building Directions." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11171.

Full text
Abstract:
Abstract Additive Manufacturing is progressively increasing its footprint in several applications from aerospace to medical and from automotive to power generation. First components, fully manufactured by 3D printing technologies are already installed in real equipment (i.e. gas turbines) and are accumulating service experience. Yet the characterization in corrosion environments has not been fully investigated and the limited available literature and testing experience, in addition to lack of process standardization, is delaying the oil companies in exploring the potentials of this innovative
APA, Harvard, Vancouver, ISO, and other styles
9

Tan, Samantha H. "Contamination-Free Manufacturing: Tool Component Qualification, Verification and Correlation with Wafers." In CHARACTERIZATION AND METROLOGY FOR ULSI TECHNOLOGY: 2003 International Conference on Characterization and Metrology for ULSI Technology. AIP, 2003. http://dx.doi.org/10.1063/1.1622484.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Schmid, Manfred, Marc Vetterli, and Konrad Wegener. "Polymer powders for laser-sintering: Powder production and performance qualification." In MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES. Author(s), 2019. http://dx.doi.org/10.1063/1.5088258.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Qualification characterization"

1

Kercher, A. K. Statistical Methods for Material Characterization and Qualification. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/886013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hunn, John D., and Andrew K. Kercher. Statistical methods for material characterization and qualification. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/974582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Morgenstern, H. A. Characterization and Qualification of a Precision Diamond Saw. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/3980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pareizs, J. M. Characterization of the SRNL-Washed tank 51 sludge batch 9 qualification sample. Office of Scientific and Technical Information (OSTI), 2016. http://dx.doi.org/10.2172/1237313.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

PAREIZS, JOHN. CHARACTERIZATION OF THE SRNL-WASHED TANK 51 SLUDGE BATCH 10 QUALIFICATION SAMPLE. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1855349.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hoffman, D., and S. DePiero. Characterization and Qualification of New TATB and Kel-F 800 for LX-17. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/902257.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pareizs, J. Characterization Of The As-Received Sludge Batch 9 Qualification Sample (Htf-51-15-81). Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1224035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Batisse, Remi, and Mures Zarea. PR-306-083509-R01 Realistic Mechanical Defects for Evaluation of Inspection Tools and Repair Techniques. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011526.

Full text
Abstract:
This report provides basic information about modern pipe samples containing dent and gouge defects for performance evaluation of inspection technologies and qualification of repair techniques. Ten mechanical damage dent and gouge defects were created in a realistic manner in modern pipes. Three types of defects were created: shallow gouge in shallow dent, severe gouge in shallow dent and shallow gouge in severe dent. Each defect of a given type is repeated twice, one for performance evaluation of inspection technologies, one for qualification of repair techniques. These defects are similar to
APA, Harvard, Vancouver, ISO, and other styles
9

D. Blanchard and R. Youngblood. Risk Informed Safety Margin Characterization Case Study: Selection of Electrical Equipment To Be Subjected to Environmental Qualification. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1047195.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

R. Youngblood and D. Blanchard. Risk Informed Safety Margin Characterization Case Study: Selection of Electrical Equipment To Be Subjected to Environmental Qualification. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1033912.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Qualification characterization' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography