Log in

Relevant bibliographies by topics / Quality of surface / Journal articles

To see the other types of publications on this topic, follow the link: Quality of surface.

Journal articles on the topic 'Quality of surface'

Author: Grafiati

Published: 4 June 2021

Last updated: 29 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Quality of surface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Semenova, Irina, and Ichiro HAGIWARA. "Optimization of surface mesh quality with feature preserving." Proceedings of the JSME annual meeting 2004.6 (2004): 87–88. http://dx.doi.org/10.1299/jsmemecjo.2004.6.0_87.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Savchenko, M., O. Egorova, I. Hagiwara, and V. Savchenko. "Development of the surface mesh quality improvement algorithm." Proceedings of The Computational Mechanics Conference 2004.17 (2004): 371–72. http://dx.doi.org/10.1299/jsmecmd.2004.17.371.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bayramoglu, M., and A. W. Duffill. "Improvements on Surface Quality of EDMed Surfaces." Surface Engineering 19, no. 1 (2003): 70–74. http://dx.doi.org/10.1179/026708403225002450.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Reddy, Yeddula Manohar, Mr K. Pavan Kumar Reddy, and Jayam Sree Hari. "Improving Surface Finishing Quality by Using Radius Carbide Tips." International Journal of Trend in Scientific Research and Development Volume-2, Issue-2 (2018): 1213–15. http://dx.doi.org/10.31142/ijtsrd9646.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Borysenko, M. V., Ya M. Chubenko, I. I. Voitko, and T. S. Chorna. "Thermal analysis as a method for evaluating the quality of regeneration of activated carbon used for purification of glycerin." Surface 12(27) (December 30, 2020): 137–45. http://dx.doi.org/10.15407/surface.2020.12.137.

Full text

Abstract:

In this work, we investigated granular and powder activated carbons (AC) – initial and waste with adsorbed impurities after purification of technical glycerin and subsequent washing with water. The aim of this work was to quantify the adsorbed impurities in the spent AC using thermal analysis (TA) and to work out the conditions for thermal regeneration of AC. TA of AC samples was carried out in an atmosphere of helium and air; the specific surface area of AC was measured by the method of low-temperature desorption of argon (SAr). It was established by the TA method that water is released in th

APA, Harvard, Vancouver, ISO, and other styles

6

Semenova, I., V. Savchenko, and I. Hagiwara. "Optimization of mesh quality with preserving surface characteristics and features." Proceedings of The Computational Mechanics Conference 2004.17 (2004): 367–68. http://dx.doi.org/10.1299/jsmecmd.2004.17.367.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Semenova, I., V. Savchenko, and I. Hagiwara. "Optimization of mesh quality with preserving surface characteristics and features." Proceedings of OPTIS 2004.6 (2004): 291–96. http://dx.doi.org/10.1299/jsmeoptis.2004.6.291.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

van der Eerden, J. P. "Surface roughening, surface melting and crystal quality." Faraday Discussions 95 (1993): 65. http://dx.doi.org/10.1039/fd9939500065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Frey, Pascal J., and Houman Borouchaki. "Surface mesh quality evaluation." International Journal for Numerical Methods in Engineering 45, no. 1 (1999): 101–18. http://dx.doi.org/10.1002/(sici)1097-0207(19990510)45:1<101::aid-nme582>3.0.co;2-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Labrosse, Q., C. P. Hoppins, and J. Summerscales. "Objective assessment of the surface quality of coated surfaces." Insight - Non-Destructive Testing and Condition Monitoring 53, no. 1 (2011): 16–20. http://dx.doi.org/10.1784/insi.2011.53.1.16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Otsuki, Toshiaki, Kenji Okita, and Hiroyuki Sasahara. "Evaluating surface quality by luminance and surface roughness." Precision Engineering 74 (March 2022): 147–62. http://dx.doi.org/10.1016/j.precisioneng.2021.10.013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Mikó, Balázs. "Surface Quality Prediction in Case of Steep Free Form Surface Milling." Key Engineering Materials 686 (February 2016): 119–24. http://dx.doi.org/10.4028/www.scientific.net/kem.686.119.

Full text

Abstract:

The machining of free form surfaces is a current and important issue in die and mould industry. Beside the complex geometry, an accurate and productive machining and good surface quality are needed. The finishing milling carried out by a ball-end or toroid milling cutter defines the surface quality, which is characterized by the surface roughness and the tool path trace. The surface quality is defined by the properties of the milling cutter, the type of surface and its position, as well as the cutting parameters. This article focuses on the z-level milling of steep surfaces by 2.5D milling str

APA, Harvard, Vancouver, ISO, and other styles

13

Stanek, Michal, Martin Reznicek, Lenka Hylova, and Roman Grund. "The influence of the mold quality and injection pressure on the product quality." MATEC Web of Conferences 210 (2018): 02043. http://dx.doi.org/10.1051/matecconf/201821002043.

Full text

Abstract:

This study deals with the study of the influence of injection pressure parameters and the quality of the surface of the mold cavity on the final quality of the product surface. This issue represents a significant problem, especially in the area of the mold production and the determination of its product price. The final price is closely linked just to the surface quality. This study is concentrated on three basic qualities of machining, namely Ra 0.1, Ra 0.8 and Ra 1.6. The possibilities of the replication of the surface of the mold cavity are then combined with various values of injection pre

APA, Harvard, Vancouver, ISO, and other styles

14

SLABEJOVÁ, GABRIELA, MÁRIA ŠMIDRIAKOVÁ, and JURAJ KADLEČÍK. "Quality of surface finishes for beech stairs." Annals of WULS, Forestry and Wood Technology 106 (January 15, 2019): 67–71. http://dx.doi.org/10.5604/01.3001.0013.7739.

Full text

Abstract:

Quality of surface finishes for beech stairs. The article deals with quality of oil varnish surface finish when compared with a standard polyurethane finish. The manufacturer recommends both surface finishes to be used for stairs. The tested surface finishes were created on beech wood according to producer recommendations. The quality comparison was based on three mechanical properties of the surface finishes: the surface hardness, impact resistance, and resistance to abrasion. The selected properties gave a good indication for suitability of the tested coating materials for stairs. Both surfa

APA, Harvard, Vancouver, ISO, and other styles

15

Kubišová, M., V. Pata, L. Sýkorová, L. Hýlová, and O. Šuba. "Multi-parameter surface-quality analysis." Materiali in tehnologije 52, no. 1 (2018): 23–26. http://dx.doi.org/10.17222/mit.2017.095.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Nicu, Mihai, and Marcel Perjoiu. "THE SURFACE WATER QUALITY ASSESSMENT." Environmental Engineering and Management Journal 3, no. 3 (2004): 477–88. http://dx.doi.org/10.30638/eemj.2004.044.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Ohara, Kunitoshi, Kiyoshi Okada, and Takayuki Akahoshi. "Surface quality of intraocular lenses." Journal of Cataract & Refractive Surgery 15, no. 1 (1989): 105–8. http://dx.doi.org/10.1016/s0886-3350(89)80151-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Chigirinskii, Yu L. "Surface quality after different treatments." Russian Engineering Research 31, no. 8 (2011): 816–19. http://dx.doi.org/10.3103/s1068798x11080065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Geng, Lei, and Hua Yan Zhong. "Evaluation of WEDM Surface Quality." Advanced Materials Research 97-101 (March 2010): 4080–83. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.4080.

Full text

Abstract:

The formation of WEDM surface is a complicated process. There are many factors which make machined surface topography have the characteristics of complex and irregular, and impact using performance of parts. The work investigated microscopic features of the WEDM surface topography based on power spectral density and fractal theory, and proposed power spectral density evaluation method of the WEDM surface. The fractal dimension of the WEDM surface was calculated by structure function method. The physical meaning of the fractal dimension of the WEDM surface was described. The result shows that t

APA, Harvard, Vancouver, ISO, and other styles

20

Hunter, H., A. Thomas, F. I. Pleavin, and S. Hodgson. "SURFACE ENGINEERING: PROVING THE QUALITY." Surface Engineering 9, no. 3 (1993): 226–30. http://dx.doi.org/10.1179/sur.1993.9.3.226.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Roşu, Cristina, Ioana Piştea, Carmen Roba, Mihaela Mihu, and Alexandru Ozunu. "Surface Water Quality Assessment. Case Study: Târnava Mare River, Mediaș Town-Romania." Indian Journal of Applied Research 4, no. 5 (2011): 70–72. http://dx.doi.org/10.15373/2249555x/may2014/22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Bleys, P., J. P. Kruth, B. Lauwers, et al. "Surface and Sub-Surface Quality of Steel after EDM." Advanced Engineering Materials 8, no. 1-2 (2006): 15–25. http://dx.doi.org/10.1002/adem.200500211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Rakhmyanov, Kharis, Julia Semyonova, and Anna Eryomina. "Technological Peculiarities Providing the Surface Quality Parameters at Ultrasonic Surface Hardening." Applied Mechanics and Materials 698 (December 2014): 482–86. http://dx.doi.org/10.4028/www.scientific.net/amm.698.482.

Full text

Abstract:

This paper presents technological limitations on processing modes that are caused by the need to provide the required quality parameters of machine part surfaces. We consider the peculiarities of the surface material behavior when processed by ultrasonic surface hardening, and show the causes of defects appearing in plastic deformation and the ways of their elimination.

APA, Harvard, Vancouver, ISO, and other styles

24

House, M. A., and D. H. Newsome. "Water Quality Indices for the Management of Surface Water Quality." Water Science and Technology 21, no. 10-11 (1989): 1137–48. http://dx.doi.org/10.2166/wst.1989.0314.

Full text

Abstract:

The need for a simple, objective and reproducible numeric scale to represent water quality in terms that all types of user will accept has been apparent for the last twenty years. Subjective classifications of water quality have been made, but they are seldom reproducible and lack sensitivity. Now, a new family of water quality indices has been developed that can be used either independently or in combination which promise to overcome previous criticisms. They are currently being used by a UK water authority to assess their utility to personnel responsible for both the planning and day-to-day

APA, Harvard, Vancouver, ISO, and other styles

25

Mazurkiewicz, Andrzej, Stanisław Bielak, and Paweł Mazurkiewicz. "Quality evaluation of the surface shaped by laser and EDM (electrical discharge machining)." Mechanik, no. 5-6 (May 2016): 556–57. http://dx.doi.org/10.17814/mechanik.2016.5-6.84.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

MOBAREK, I. "SURFACE QUALITY RELATED TO TURNING TOOLS." International Conference on Applied Mechanics and Mechanical Engineering 2, no. 2 (1986): 123–29. http://dx.doi.org/10.21608/amme.1986.57191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Guyot, Vincent, Jean-François Martin, Alain Ruelle, et al. "Control of Surface Quality of 0.08%." ISIJ International 36, Suppl (1996): S227—S230. http://dx.doi.org/10.2355/isijinternational.36.suppl_s227.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Kodres, C. A., D. R. Polly, and T. A. Hoffard. "Surface quality impact of cleaning systems." Metal Finishing 95, no. 9 (1997): 48–53. http://dx.doi.org/10.1016/s0026-0576(97)85859-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Riaz, S., V. Ludlow, B. Stewart, et al. "Surface quality of continuously cast semis." Ironmaking & Steelmaking 34, no. 5 (2007): 403–9. http://dx.doi.org/10.1179/174328107x225125.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Zezza, F., R. Comparelli, M. Striccoli, et al. "High quality CdS nanocrystals: surface effects." Synthetic Metals 139, no. 3 (2003): 597–600. http://dx.doi.org/10.1016/s0379-6779(03)00320-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Rechenko, D. S., B. P. Gritsenko, Yu V. Titov, V. A. Sergeev, and G. Zh Nogaibekova. "Surface Quality after High-Speed Grinding." Russian Engineering Research 38, no. 11 (2018): 889–91. http://dx.doi.org/10.3103/s1068798x18110114.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Tamarkin, M. A., E. E. Tishchenko, and V. G. Lebedenko. "Surface-layer quality in shot treatment." Russian Engineering Research 30, no. 2 (2010): 144–48. http://dx.doi.org/10.3103/s1068798x10020115.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Kokoreva, O. G. "Surface quality in static-pulsed treatment." Russian Engineering Research 32, no. 7-8 (2012): 608–9. http://dx.doi.org/10.3103/s1068798x12060123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

de Rooij, Matthijn, X. Ma, A. J. den Bakker, and Robert J. Werkhoven. "Surface Quality Prediction in Aluminum Extrusion." Key Engineering Materials 491 (September 2011): 27–34. http://dx.doi.org/10.4028/www.scientific.net/kem.491.27.

Full text

Abstract:

The surface quality of aluminium extrusion products can be hampered by undesired surface features like die lines and pickups. In particular the presence of pickups is considered as undesirable. Surface pickups appear as intermittent torn marks on the aluminium extrusion products, often terminated with a protruding lump rising above the surface up to hundreds of microns in height. Using a model calculating initiation, growth as well as detachment of the lumps on the die bearing surface, the surface quality of aluminium extrusion products can be predicted. The results of the model can be present

APA, Harvard, Vancouver, ISO, and other styles

35

Li, Yan, Miao Hu, and Taiyong Wang. "Visual inspection of weld surface quality." Journal of Intelligent & Fuzzy Systems 39, no. 4 (2020): 5075–84. http://dx.doi.org/10.3233/jifs-179993.

Full text

Abstract:

Welding is an important method for modern material processing. In actual processing, due to the influence of processing accuracy and welding thermal deformation, various defects often appear in the appearance of the weld. At present, visual inspection is mainly used for the appearance inspection of welds. The detection of weld defects mainly depends on the work experience of the staff. Based on the above background, the purpose of this article is to visually inspect the weld surface quality. This article uses visually obtained fringe images of weld contours as information sources to explore a

APA, Harvard, Vancouver, ISO, and other styles

36

Ainsworth, Steve. "Overview of Surface, Groundwater Source Quality." Opflow 21, no. 3 (1995): 4–5. http://dx.doi.org/10.1002/j.1551-8701.1995.tb00991.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Myers, Raymond H. "Response surface methodology in quality improvement." Communications in Statistics - Theory and Methods 20, no. 2 (1991): 457–76. http://dx.doi.org/10.1080/03610929108830509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Tripathi, Abhinav, Ian Ivar Suni, Yuzhuo Li, Francois Doniat, and James McAndrew. "Cu Electrochemical Mechanical Planarization Surface Quality." Journal of The Electrochemical Society 156, no. 7 (2009): H555. http://dx.doi.org/10.1149/1.3125703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Veraverbeke, E. A., P. Verboven, J. Lammertyn, P. Cronje, J. De Baerdemaeker, and B. M. Nicolaï. "Thermographic surface quality evaluation of apple." Journal of Food Engineering 77, no. 1 (2006): 162–68. http://dx.doi.org/10.1016/j.jfoodeng.2005.06.059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

ФЕДОРОВ, С. Е., А. А. ЖАЛНИН, Н. А. ЖАЛНИН, and А. А. ПОЛУНКИН. "IMPROVING THE QUALITY OF SURFACE TILLAGE." VESTNIK RIAZANSKOGO GOSUDARSTVENNOGO AGROTEHNOLOGICHESKOGO UNIVERSITETA IM P A KOSTYCHEVA, no. 4(48) (December 29, 2020): 121–27. http://dx.doi.org/10.36508/rsatu.2020.48.4.017.

Full text

Abstract:

Проблема и цель. Обработка почвы является одной из трудоемких и ответственных операций. Современные комбинированные культиваторы с упругими стойками не в полной мере отвечают агротехническим требованиям, предъявляемым к ней. Это отражается на качестве и количестве получаемой сельскохозяйственной продукции. Предпосевная обработка почвы является заключительным этапом перед посевом культур. Во время предпосевной обработки осуществляется несколько технологических процессов, включающих крошение почвы, формирование посевного ложа, подрезание сорных растений. Качественное выполнение формирования посе

APA, Harvard, Vancouver, ISO, and other styles

41

Popovyan, N. O., and A. B. Usov. "DYNAMIC SURFACE WATER QUALITY MANAGEMENT SYSTEM." Ecology. Economy. Informatics.System analysis and mathematical modeling of ecological and economic systems 1, no. 6 (2021): 144–49. http://dx.doi.org/10.23885/2500-395x-2021-1-6-144-149.

Full text

Abstract:

The article examines the interaction of subjects of a two-level hierarchical system. An industrial enterprise discharges wastewater into the river as a result of its work. To prevent the ingress of a large amount of pollutants, water treatment facilities have been installed, the operation of which is regulated by the level of technical support. The state allocates funds to support the activities of the enterprise and regulates the standards for the discharge of pollutants. The interests of both subjects are to maximize their target functional. The article is devoted to the problem of finding o

APA, Harvard, Vancouver, ISO, and other styles

42

Zeilmann, Rodrigo Panosso, Gerson Luiz Nicola, Fernando Moreira Bordin, Tiago Vacaro, and Mariana Czarnobay Zanotto. "Surface Quality of Cavities Obtained by EDM Process." Advanced Materials Research 223 (April 2011): 931–39. http://dx.doi.org/10.4028/www.scientific.net/amr.223.931.

Full text

Abstract:

The electrical discharge machining (EDM) is a process widely used in machining of complex geometries and hardened materials, conditions that often are not met by conventional machining processes. In EDM the electrode reproduces its image or geometry on the part and this image is obtained by chip removing process, which is given by high frequency electrical discharges, causing the melting and vaporization of electrically conductive materials. Due to this mechanism of material removal, the surface is subjected to high thermal loads, which heavily influences the surface quality of obtained parts.

APA, Harvard, Vancouver, ISO, and other styles

43

Pope, Addy, Tavi Murray, and Adrian Luckman. "DEM quality assessment for quantification of glacier surface change." Annals of Glaciology 46 (2007): 189–94. http://dx.doi.org/10.3189/172756407782871792.

Full text

Abstract:

AbstractPhotogrammetric digital elevation models (DEMs) are often used to derive and monitor surfaces in inaccessible areas. They have been used to monitor the spatial and temporal change of glacier surfaces in order to assess glacier response to climate change. However, deriving photogrammetric DEMs of steep mountainous topography where the surface is often obscured by regions of deep shadow and snow is particularly difficult. Assessing the quality of the derived surface can also be problematic, as high-accuracy ground-control points may be limited and poorly distributed throughout the modell

APA, Harvard, Vancouver, ISO, and other styles

44

SLABEJOVÁ, GABRIELA, MÁRIA ŠMIDRIAKOVÁ, and IVAN VOZAF. "Quality of surface finish on furniture doors of MDF board." Annals of WULS, Forestry and Wood Technology 105 (June 6, 2019): 102–6. http://dx.doi.org/10.5604/01.3001.0013.7725.

Full text

Abstract:

Quality of Surface Finish on Furniture Doors of MDF Board. The paper deals with the assessment of the quality of furniture door surface. The properties were tested on the following types of the surface finish on MDF doors: PVC foil (glossy and matt), acrylic foil, and PUR pigmented coating material. The following physical and mechanical properties of the surfaces were assessed: the film hardness, the impact resistance, and the resistance against scuffing. The polyurethane surface finish and the glossy PVC foil achieved the same film hardness. The impact resistance of the polyurethane finish wa

APA, Harvard, Vancouver, ISO, and other styles

45

Kong, L. B., C. F. Cheung, D. Gao, W. B. Lee, and S. To. "Theoretical and experimental evaluation of surface quality for optical freeform surfaces." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220, no. 9 (2006): 1439–48. http://dx.doi.org/10.1243/09544054jem362.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

SLABEJOVÁ, GABRIELA, and MÁRIA ŠMIDRIAKOVÁ. "The effect of mechanical treatment of beech wood surface on quality of surface finish." Annals of WULS, Forestry and Wood Technology 106 (January 15, 2019): 99–106. http://dx.doi.org/10.5604/01.3001.0013.7744.

Full text

Abstract:

The effect of mechanical treatment of beech wood surface on quality of surface finish. The paper deals with the quality of three surface finishes intended into interior. Three types of coating materials were tested (polyurethane, waterborne, wax). Each type of the surface finish was created on beech wood surface in three various coating thicknesses. The coating thicknesses differed in number of coatings of the coating material. The surface finishes were evaluated according to the impact resistance and the resistance to abrasion. The polyurethane surface finish showed the lowest resistance to a

APA, Harvard, Vancouver, ISO, and other styles

47

Ma, F. J., D. M. Guo, R. K. Kang, and Y. J. Ren. "Surface quality of carbon/carbon composite after ultrasonic assisted turning." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225, no. 11 (2011): 2144–48. http://dx.doi.org/10.1177/0954405410396131.

Full text

Abstract:

It is usually hard to obtain a good surface quality of carbon/carbon (C/C) composite by turning due to its non-homogeneity and anisotropy. Contrasting experiments of ultrasonic assisted turning (UAT) and common turning (CT) of the C/C composite were carried out using a polycrystalline diamond tool. The cylindrical surface of the turning was classified into four typical types based on different fibre orientations. The influence of fibre distribution characteristics on surface roughness was analysed by measuring and comparing the roughness of these surfaces, and an evaluation method of surface q

APA, Harvard, Vancouver, ISO, and other styles

48

Říhová Ambrožová, J., J. Hubáčková, and I. Čiháková. "Drinking water quality in the Czech Republic." Czech Journal of Food Sciences 27, No. 2 (2009): 80–87. http://dx.doi.org/10.17221/155/2008-cjfs.

Full text

Abstract:

The quality of water has to be controlled and monitored by drinking water suppliers during all stages of the treatment process from the water sources to the end of distribution systems. The research, performed in Czech Republic from 2006 to 2008, deals with the assessment of the affect of water tanks on the quality of water supplied to consumers, specifically from various points of view: microbiological, biological and physic-chemical changes in water accumulation. Also studied was the influence of the air on the quality of accumulated water (secondary contamination), the influence of the stru

APA, Harvard, Vancouver, ISO, and other styles

49

BAGCI, UFUK, and AYHAN TEMIZ. "Microbiological Quality of Fresh-Squeezed Orange Juice and Efficacy of Fruit Surface Decontamination Methods in Microbiological Quality." Journal of Food Protection 74, no. 8 (2011): 1238–44. http://dx.doi.org/10.4315/0362-028x.jfp-11-021.

Full text

Abstract:

The aims of this study were to evaluate the microbiological quality of fresh-squeezed orange juice and to reduce the microbial population by using various chemical and physical fruit surface decontamination methods. In the first step of the study, polyethylene-bottled fresh-squeezed orange juice samples purchased in Ankara, Turkey, were examined. The average aerobic plate count (APC) and coliform count (CC) varied within the ranges of 3 to 5 log CFU/ml and 1 to 4 log MPN/ml, respectively. Ten of 60 samples contained various levels of Escherichia coli, while Salmonella spp. and E. coli O157:H7

APA, Harvard, Vancouver, ISO, and other styles

50

VOSS, DENNIS, HANS-JOACHIM PUTZ, and SAMUEL SCHABEL. "DIP quality influenced by process water quality." September 2014 13, no. 9 (2014): 51–60. http://dx.doi.org/10.32964/tj13.9.51.

Full text

Abstract:

The need for deinking mills to reduce their fresh water consumption has resulted in higher loads of various contaminants in the process water. Lower recovered paper quality also leads to higher contamination levels in the mills. This higher load has an influence on achievable target brightness. The objective of the work was to determine and explain the main reasons for relatively poor deinked pulp quality or poor deinking potential based on the influence of recovered paper composition and process water quality. The process water parameters significantly affect the deinking potential of recover

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!