Relevant bibliographies by topics / R. Bliss Manufacturing Co

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'R. Bliss Manufacturing Co'

Author: Grafiati
Published: 4 June 2021
Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'R. Bliss Manufacturing Co.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "R. Bliss Manufacturing Co"

1

Chrine, C. Hapompwe, Banda Nzovwa, and Nachilima Chalwe Abigail. "Examining Critical Success Factors for Africa's Sustainable Industrial Development with Special Reference to Zambian Manufacturing Sector – Challenges, Prospects & Opportunities." Journal of Economics, Finance and Management Studies 07, no. 01 (2024): 571–84. https://doi.org/10.5281/zenodo.10575245.

Full text
Abstract:
This study was intended to examine critical success factors for Africa’s industrial development with special reference to the Zambian manufacturing sector - challenges, prospects & opportunities. The study had three (3) research questions; what are critical success factors for Zambia’s industrial development? How efficacious are the existing policy frameworks and /or governmental undertakings to guarantee Zambia’s achievement of SDG # 9 by the year 2030? What are socio-economically viable and actionable policy imperatives to industrialize the country by the targeted year?
APA, Harvard, Vancouver, ISO, and other styles
2

Mota, Carlos, Shen-Yu Wang, Dario Puppi, et al. "Additive manufacturing of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] scaffolds for engineered bone development." Journal of Tissue Engineering and Regenerative Medicine 11, no. 1 (2014): 175–86. http://dx.doi.org/10.1002/term.1897.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ju, Xiangwen, Jun Xiao, Dongli Wang, Cong Zhao, and Xianfeng Wang. "Research on the Manufacturing Quality of Co-Cured Hat-Stiffened Composite Structure." Materials 14, no. 11 (2021): 2747. http://dx.doi.org/10.3390/ma14112747.

Full text
Abstract:
The stringer-stiffened structure is widely used due to its excellent mechanical properties. Improving the manufacturing quality of stringer-stiffened structure which have complex geometry is important to ensure the bearing capacity of aviation components. Herein, composite hat-stiffened composite structures were manufactured by different filling forms and bladders with various properties, the deformation of silicone rubber bladder in co-curing process was studied by using the finite element method. The thickness measurement at different positions of the hat-stiffened structure was performed to
APA, Harvard, Vancouver, ISO, and other styles
4

Van den Bulte, Christophe, and Rudy K. Moenaert. "The Effects of R&D Team Co-location on Communication Patterns among R&D, Marketing, and Manufacturing." Management Science 44, no. 11-part-2 (1998): S1—S18. http://dx.doi.org/10.1287/mnsc.44.11.s1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hsiao, Chun Ching, and Li Siang Luo. "Gas Sensors Fabricated by Aerosol Deposition." Applied Mechanics and Materials 541-542 (March 2014): 151–54. http://dx.doi.org/10.4028/www.scientific.net/amm.541-542.151.

Full text
Abstract:
Zinc oxide (ZnO) is a low toxicity and environmentally friendly material, and it is applied on devices, sensors or actuators for trending towards green-life. A porous ZnO film deposited by a rapid process of aerosol deposition (AD) was employed as the gas-sensitive material in a CO gas sensor for reducing the manufacturing cost and time, further extending the AD application. A relative resistance change (??R / R) of the ZnO gas sensor was used for CO gas measurement. The sensitivity of the fabricated ZnO gas sensors had a more outstanding performance about 49%, compared to the literature data
APA, Harvard, Vancouver, ISO, and other styles
6

Dormidontov, Andrey G., Natalia B. Kolchugina, Nikolay A. Dormidontov, and Yury V. Milov. "Structure of Alloys for (Sm,Zr)(Co,Cu,Fe)Z Permanent Magnets: First Level of Heterogeneity." Materials 13, no. 17 (2020): 3893. http://dx.doi.org/10.3390/ma13173893.

Full text
Abstract:
An original vision for the structural formation of (Sm,Zr)(Co,Cu,Fe)Z alloys, the compositions of which show promise for manufacturing high-coercivity permanent magnets, is reported. Foundations arising from the quantitative analysis of alloy microstructures as the first, coarse, level of heterogeneity are considered. The structure of the alloys, in optical resolutions, is shown to be characterized by three structural phase components, which are denoted as A, B, and C and based on the 1:5, 2:17, and 2:7 phases, respectively. As the chemical composition of alloys changes monotonically, the quan
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Yuhao, Jianmin Wang, and Zhongbing Dong. "Interactions and Co-Governance Policies of Stakeholders in the Carbon Emission Reduction." Sustainability 14, no. 10 (2022): 5891. http://dx.doi.org/10.3390/su14105891.

Full text
Abstract:
Stakeholders need to participate in the carbon abatement activities to achieve carbon peak and carbon neutralization. This paper developed a system of evaluation indices on carbon emission reduction of stakeholders to elucidate the interplaying relationships among stakeholders in carbon emission reduction by using the structural equation model. The analysis showed that (1) the five stakeholders affecting carbon-reduction intensity are ranked in the following descending order: manufacturing enterprises, government, energy supply industry, R&D organizations, and financial institutions, while
APA, Harvard, Vancouver, ISO, and other styles
8

Puppi, Dario, Alessandro Pirosa, Andrea Morelli, and Federica Chiellini. "Design, fabrication and characterization of tailored poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyexanoate] scaffolds by computer-aided wet-spinning." Rapid Prototyping Journal 24, no. 1 (2018): 1–8. http://dx.doi.org/10.1108/rpj-03-2016-0037.

Full text
Abstract:
Purpose The purpose of this paper is to describe the fabrication and characterization of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyexanoate] (PHBHHx) tissue engineering scaffolds with anatomical shape and customized porous structure. Design/methodology/approach Scaffolds with external shape and size modeled on a critical size segment of a rabbit’s radius model and an internal macrochanneled porous structure were designed and fabricated by means of a computer-aided wet-spinning (CAWS) technique. Morphological, thermal and mechanical characterization were carried out to assess the effect of the
APA, Harvard, Vancouver, ISO, and other styles
9

Raymond, Louis, and Josée St-Pierre. "Strategic Capabilities for Product Innovation in SMEs." International Journal of Entrepreneurship and Innovation 11, no. 3 (2010): 209–20. http://dx.doi.org/10.5367/000000010792217236.

Full text
Abstract:
With the advent of globalization and the knowledge economy, an important issue has arisen concerning the relationship between the strategic capabilities of SMEs and their capacity to innovate. From a contingency perspective, one would argue that the firm's strategic capabilities can be leveraged for the purposes of innovation to the extent that these capabilities are in strategic co-alignment. This gives rise to the following empirical research questions: (a) are the networking, R&D and technological capabilities of SMEs co-aligned such that one can observe different organizational gestalt
APA, Harvard, Vancouver, ISO, and other styles
10

Roes, Kit C. B., Ronald J. M. M. Does, and Bas S. Jonkers. "Effective application ofQ(R) charts in low-volume manufacturing." Quality and Reliability Engineering International 15, no. 3 (1999): 175–90. http://dx.doi.org/10.1002/(sici)1099-1638(199905/06)15:3<175::aid-qre231>3.0.co;2-s.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "R. Bliss Manufacturing Co"

1

Li, Zhe 1974. "The environmental Kuznets curve reexamined for CO₂ emissions in Canadian manufacturing industries /." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=80319.

Full text
Abstract:
Recent studies of the environmental Kuznets curve raise questions regarding the relationship between environmental indicators and GDP and the fundamental reasons that explain this relationship. In response, this thesis presents one-sector and two-sector models to analyze the alternative causal relationships between an environmental indicator and GDP at different stages of economic development. These models analyze how economic scale, technology, preferences, and economic structure influence the causality and shape of the relationship. These theoretical studies are followed by two empiri
APA, Harvard, Vancouver, ISO, and other styles
2

Lica, Denada. "Manufacturing location choice: empirical evidence from Italy." Doctoral thesis, Università degli studi di Padova, 2018. http://hdl.handle.net/11577/3426353.

Full text
Abstract:
The aim of this study is to investigate the relationship between manufacturing location choices and firms competitiveness in high-cost countries by analyzing different strategies of location choices. This research question will be covered in two chapters. Chapter 1 analysis the impact of COO on companies offshoring and reshoring decisions in order to achieve competitive advantage. In particular it offers some insights on main motivations of offshoring and reshoring strategies, the main attractive indicators of these locations where manufacturing activities are established and finally the COO s
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "R. Bliss Manufacturing Co"

1

R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, 2017.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cooper, Patty. R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, Incorporated, 2022.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, 2017.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

R. Bliss Mfg. Co. Dollhouses, Furniture, and Buildings. Blurb, 2024.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

R D Wood and Company. Taylor Gas Producer and Bildt Automatic Feed Device, Patented : Sole Makers R. D. Wood & Co... . Philadelphia, Pa.: Gas Fuel and the Application of Producer Gas to Manufacturing Purposes. Creative Media Partners, LLC, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Taylor Gas Producer and Bildt Automatic Feed Device, Patented : Sole Makers R. D. Wood & Co... . Philadelphia, Pa.: Gas Fuel and the Application of Producer Gas to Manufacturing Purposes. Creative Media Partners, LLC, 2023.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "R. Bliss Manufacturing Co"

1

Vragova, Elena Vladimirovna, Nurkul Abdilazizovich Murzakulov, and Mukhammadsadyk Makhamatrazhapovich Yslamov. "Solutions to a Complex of Environmental and Economic Problems by Small Biogas Plants in Households of the Republic of Kyrgyzstan." In Principles of the New Ecosystem Formation: Multicultural Space. Publishing house Sreda, 2022. http://dx.doi.org/10.31483/r-102660.

Full text
Abstract:
Today, in the energy sector, a promising direction for the use of renewable energy sources. A variety of enterprises often have production waste that can be used as renewable secondary energy resources. The concept of lean manufacturing goes hand in hand with increased environmental sustainability. Reducing production waste to a minimum by recycling it increases the energy-saving potential of production, on the one hand, and the indicator of environmental safety, on the other. Currently, the problem of utilization and further use of animal manure is relevant. One of the options for efficient p
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Jie Jack. "Beginning of an Era: The First Blockbuster Drug, Tagamet." In Blockbuster Drugs. Oxford University Press, 2014. http://dx.doi.org/10.1093/oso/9780199737680.003.0005.

Full text
Abstract:
Tagamet emerged as the first blockbuster drug when its sales exceeded $1 billion in 1986, three years after its introduction to the market. An anti–peptic ulcer drug, Tagamet was discovered by James W. Black and his colleagues at Smith Kline &amp; French’s (SK&amp;F) British subsidiary in Welwyn Garden City. Before Tagamet, SK&amp;F was a little-known U.S. drug firm in Philadelphia. After Tagamet, SK&amp;F became one of the largest pharmaceutical companies in the world. The history of Tagamet is one of the most extraordinary in the annals of medicine. It is a saga of a drug that almost escaped
APA, Harvard, Vancouver, ISO, and other styles
3

Roy, Mrinmoy. "Good Pharmacy Practice in India: Its past, Present and Future with Need and Status in COVID 19." In Bioethical Issues in Healthcare [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.100635.

Full text
Abstract:
The pandemic of COVID-19 has highlighted the importance of emergency preparedness and response (EP and R) in India’s education, training, capacity building, and infrastructure growth. Healthcare professionals, especially pharmacy professionals (PPs) in India, continued to provide drugs, supplies, and services during the pandemic. The public-private healthcare system in India is complicated and of varying quality. Patients face problems as a result of gaps in pharmacy practice education and training, as well as a lack of clarity about pharmacists’ positions. Job requirements and effective place
APA, Harvard, Vancouver, ISO, and other styles
4

"gluten quality involves the addition of low levels of gluten, ied typically are compared to results obtained by some about 2%, to a standard test flour, which often is of a type of baking test. McDermott [85] compared baking "weak" type, and observing the effects on bread quality. (Chorleywood bake test) and other properties of 30 com-Water absorption is adjusted as appropriate for the gluten mercial glutens, mostly of European origin (Table 8), and levels added [23]. A stressed gluten-enriched baking test found that under his test conditions six samples were of was identified [31], which assumes that gluten is added to relatively poor quality; correlation between baking perfor-enable production of specialty breads using substantial mance and other measured properties was not high. levels of non-gluten-containing ingredients such as rye Weegels and Hamer [130] studied a group of 32 European flour, dietary fiber, bran and germ, or raisins [49]. Czucha-commercial glutens. These workers devised a test involv-j owska and Pomeranz [31] described a simple, repro-ing protein content, denaturation index (based on a series ducible method for baking undiluted gluten, highly corre-of sodium dodecyl sulfate sedimentation measurements), lated with the gluten-enrichment baking test. and extensigraph resistance; a model utilizing these tests A prime reason for performing end-use tests of func-was able to predict 59% of the baking quality variation of tionality, of course, is to monitor variations in the quality the glutens. Bushuk and Wadhawan [20] examined 27 of commercial wheat glutens that can occur. Differences commercial gluten samples, although only 8 were subject-among commercial gluten are usually attributable to varia-ed to extensive end-use testing; the highest correlation co-tions in the starting material, wheat or flour, and/or efficients were between loaf volume and acetic acid-solu-changes caused by production processing conditions. Dur-ble protein (r = 0.88) and between loaf volume and ing processing, the drying of gluten is critical, as noted fluorescence of acetic acid extract (r = 0.98). above, and investigators have shown that less than opti-mum heat treatment can lower the baking quality of gluten (b) Nonbaking Tests. Considerable efforts have been [14,49,98,111,130]. However, McDermott [85] reported expended in developing nonbaking tests to evaluate the no definite relationship between manufacturing variables quality or vitality of wheat gluten for baking purposes. The and gluten quality in a group of 30 commercial glutens. baking test is often cited as being labor intensive, relative-Dreese et al. [38] studied commercial and hand-washed ly expensive, requiring skilled workers, and not effectively lyophilized gluten and found that differences were more differentiating gluten quality [86]. The farinograph has attributable to washing procedures than to drying proce-been used to evaluate gluten for many years. The usual ap-dures. proach has been to test the gluten as a gluten-flour mixture Results obtained by other methods that have been stud-(e.g., Refs. 5, 18, 36, and 49), while an alternative method TABLE 8 Properties of 30 Commercial Glutens Baking performance Property Average Range Poor Average Good Increase in loaf volume, %a 10 7.7-12.2 8.3 10.2 11.8 Protein, %b 77.4 66.4-84.3 76.2 77.4 81.1 Moisture, % 7.55.3-10.2 8.877.7 Particle size, % <160 p.m 88.8 55.8-98 80.5 91 90.3 Color 68.3 56.5-75 65.2 68.9 69.5 Lipid, % 5.84.2-7.65.86.15.1 Ash, % 0.69 0.44-0.94 0.71 0.74 0.6 Chloride, %` 0.08 0.01-0.28 0.10.08 0.08 Water absorption, mug protein 2.37 1.84-2.93 2.26 2.45 2.29 SDS sedimentation volume, ml/g protein 99 55-159 70 107 127 Lactic acid sedimentation, % reduction in turbidity 18 2-68 49 11 7 Hydration time, min 0.90.2-10 2.72.40.6 Extensibility, units/min 3.80.7-9.33.23.93.9 Viscosity, cP 117 73-222 159 109 101 '2% gluten protein. Dry matter basis. `As NaCl. Source: Ref. 85." In Handbook of Cereal Science and Technology, Revised and Expanded. CRC Press, 2000. http://dx.doi.org/10.1201/9781420027228-83.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "R. Bliss Manufacturing Co"

1

Nagamatsu, Soichi, Kazuyuki Mizuhara, Yukio Matsuda, Akio Iwanaga, and Shoji Ishiwata. "Current Status of Industrial and Automotive Ceramic Gas Turbine R&D in Japan." In ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/91-gt-101.

Full text
Abstract:
The current status of Japan’s national Ceramic Gas Turbines (CGTs) projects is overviewed. The Japanese Ministry of International Trade and Industry (MITI) is conducting two national R&amp;D projects on CGT. These include a project on 300kW industrial CGTs for co-generation and mobile power generation use and a project on 100kW CGT for automotive use. The 300kW project was started in 1988, and is scheduled to develop three kinds of CGTs over nine years. The New Energy and Industrial Technology Development Organization (NEDO) is the main contractor, and three groups of private industries are su
APA, Harvard, Vancouver, ISO, and other styles
2

Rußkamp, Nina, Claas Digmayer, and Eva-Maria Jakobs. "Co-Creation-Based Framework for the Agile Development of AI-Supported CAM Systems." In 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023). AHFE International, 2023. http://dx.doi.org/10.54941/ahfe1003507.

Full text
Abstract:
Digital transformation processes in the course of industry 4.0 affect computer-aided manufacturing (CAM) in two ways: The acceleration of production and innovation cycles shortens the time to carry out CAM-planning tasks; simultaneously, an increasing product individualization raises the complexity of CAM-planning tasks and quality requirements for the planning results. Thus, CAM users need to solve complex CAM-planning tasks in increasingly shorter time frames. Efforts to meet the quality requirements nonetheless lead to overload and frustration of the user [1], [2]. To overcome this challeng
APA, Harvard, Vancouver, ISO, and other styles
3

Rußkamp, Nina, Claas Digmayer, Eva-Maria Jakobs, Florens Burgert, Marisa Schirmer, and Susanne Mütze Niewöhner. "New ways to design next-generation CAM systems. An integrated approach of co-creation and process modeling." In 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1002682.

Full text
Abstract:
Computer-Aided Manufacturing systems are common means to increase the flexibility and efficiency of production planning in manufacturing companies. Digital transformation processes increase innovation cycles and product individualization [1] and, by doing so, the complexity of production planning and CAM systems use [2]. In the R&amp;D project CAM2030 a new generation of CAM systems is developed by integrating innovative technologies (AI, cloud computing, evolutionary algorithms). The highly innovative process requires new methods. This paper presents an integrated methodological approach that
APA, Harvard, Vancouver, ISO, and other styles
4

Mercure, Robert A. "Propulsion System Considerations for Future Supersonic Transports: A Global Perspective." In ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-gt-245.

Full text
Abstract:
With research and technology (R&amp;T) development activities for the next generation SuperSonic Transport (SST) being pursued globally over the past few years, the options to proposed airframe and engine concepts appears to be converging. The United States, the Europeans, and the Japanese are all engaged in developing the technologies needed for a future SST that is environmentally compatible and economically practical. Boeing and McDonnell Douglas are part of the team under an R&amp;T contract with the National Aeronautics and Space Administration to develop critical components and enabling
APA, Harvard, Vancouver, ISO, and other styles
5

KovářÍk, Ondřej, Jaroslav Čech, Jan Cizek, Jakub Klečka, and Michal Hajíček. "Mechanical and Fatigue Properties of Tungsten Heavy Alloy Prepared by RF-Plasma." In ITSC2021, edited by F. Azarmi, X. Chen, J. Cizek, et al. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.itsc2021p0115.

Full text
Abstract:
Abstract Tungsten heavy alloy (WHA) of W-Ni composition was deposited from a blend of standard thermal spray powders using radio frequency inductively coupled plasma torch (RF-ICP) in a protective atmosphere. The deposit (RF WHA) contained a fully developed WHA structure; i.e.; spherical W particles embedded in a Ni-rich matrix. The bending tensile strength Rm; bending yield strength Rp;0.2; and elastic modulus of the deposit were compared with two W-Ni-Co references fabricated by powder metallurgy (PM WHA) via sintered and quenched (PMSQ); and forged and annealed (PM-FA). While the RF deposit
APA, Harvard, Vancouver, ISO, and other styles
6

Chai, Liang, Aziz Shaikh, and Vern Stygar. "Characterization of A6 LTCC Systems for Microwave and Millimeter-Wave Applications." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35134.

Full text
Abstract:
Low Temperature Co-fired Ceramic (LTCC) materials are widely used in ceramic packaging and interconnect applications, such as RF receiving modules for next generation handsets and T/R modules for satellite communications. The application frequency spans from low GHz to 100+ GHz. A variety of techniques must be used to characterize dielectric properties (loss tangent and dielectric constant) of LTCC in the wide frequency range. These techniques include the parallel plate capacitor method from DC to several MHz, cavity methods in x-band, and open resonator techniques for frequencies up to 100+ G
APA, Harvard, Vancouver, ISO, and other styles
7

Dignani, Francesca, and Gabriella Compagnone. "Conser Duetto Technology: An Innovative Approach to the Production of Biodegradable Plastics." In SPE Conference at Oman Petroleum & Energy Show. SPE, 2025. https://doi.org/10.2118/224949-ms.

Full text
Abstract:
Abstract Conser Duetto technology is a revolutionary process that facilitates the production of biodegradable plastic intermediates from maleic anhydride. This Technology represents a really promising process to produce intermediates which are becoming key chemicals for the development of biodegradable plastics. In detail, the innovative and interesting aspect of the Duetto technology is the co-production of butanediol (BDO) and dimethyl succinate (DMS), which are the mean feedstocks for downstream biodegradable polymers plant such as PBS. The origin of this technology starts from the consolid
APA, Harvard, Vancouver, ISO, and other styles
8

Jayawardhana, S., S. Bandara, V. Adikariwattage, and T. Sugathapala. "A Data-driven framework for predicting national vehicular emissions using regulatory emissionstest databases of Sri Lanka." In Transport Research Forum 2025. Transportation Engineering Group, Department of Civil Engineering, University of Moratuwa, 2025. https://doi.org/10.31705/trf.2025.19.

Full text
Abstract:
This study presents a data-driven framework for forecasting national vehicular emissions in Sri Lanka using emissions testing records maintained by the Department of Motor Traffic (DMT). These databases, originally collected for compliance verification, remain largely underutilized despite their potential for informing long-term environmental policy. Focusing on passenger cars with internal combustion engines as a case study, a Tier 2 bottom-up emissions estimation methodology is implemented, integrating annual mileage of tested vehicles on a monthly basis and vehicle vintage-size composition.
APA, Harvard, Vancouver, ISO, and other styles
9

Hack, Horst, Robert Purgert, and Robert Schrecengost. "Update on United States Advanced Ultra-Supercritical Component Test Project for 760 °C Steam Conditions." In AM-EPRI 2019, edited by J. Shingledecker and M. Takeyama. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.am-epri-2019p1476.

Full text
Abstract:
Abstract Following the successful completion of a 15-year effort to develop and test materials that would allow advanced ultra-supercritical (A-USC) coal-fired power plants to be operated at steam temperatures up to 760°C, a United States-based consortium has been working on a project (AUSC ComTest) to help achieve technical readiness to allow the construction of a commercial scale A-USC demonstration power plant. Among the goals of the ComTest project are to validate that components made from the advanced alloys can be designed and fabricated to perform under A-USC conditions, to accelerate t
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "R. Bliss Manufacturing Co"

1

Kearns, Nick, and William Beale. Show me the Money: Perspectives on Applying for Government Research and Development Co-funding. Unitec ePress, 2015. http://dx.doi.org/10.34074/ocds.022.

Full text
Abstract:
In 2012-14 Unitec Institute of Technology (in partnership with The Innovation Workshop) carried out research into the application process for New Zealand Government Research &amp; Development [R&amp;D] co-funding administered by the Ministry of Science &amp; Innovation (now Callaghan Innovation Ltd). This research revealed widespread applicant frustration with the application criteria and process. A significant problem perceived by High Value Manufacturing and Service Small Medium Enterprises (HVMS SME) businesses is the focus of R&amp;D funding on product innovation followed by a lack of fund
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'R. Bliss Manufacturing Co' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography