Log in

Relevant bibliographies by topics / R1233zd(E)

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers
Reports

Academic literature on the topic 'R1233zd(E)'

Author: Grafiati

Published: 10 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'R1233zd(E).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "R1233zd(E)"

1

Li, Shengyu, and Jun Lu. "A Theoretical Comparative Study of Vapor-Compression Refrigeration Cycle using Al2O3 Nanoparticle with Low-GWP Refrigerants." Entropy 24, no. 12 (2022): 1820. http://dx.doi.org/10.3390/e24121820.

Full text

Abstract:

Nanorefrigerant is a mixture of nanoparticles and pure refrigerant, which can increase heat transfer characteristics in refrigeration and air conditioning equipment. The performance of four different Al2O3 nanorefrigerants and their pure fluids (R600a, R134a, R1234yf, and R1233zd(E)) is analyzed in a vapor-compression refrigeration cycle. The enthalpy of a nanorefrigerant in the refrigeration cycle is calculated by using the prediction method based on the density of nanorefrigerant. A numerical model is established for the thermodynamic analysis, and the results show that adding nanoparticles

APA, Harvard, Vancouver, ISO, and other styles

2

Liu, Yu, and Xiaoming Zhao. "Measurement of the heat capacity of R1233zd(E)." International Journal of Refrigeration 86 (February 2018): 127–32. http://dx.doi.org/10.1016/j.ijrefrig.2017.11.015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lee, Keon Hu, Seok Ho Yoon, Chan Ho Song, Ook Joong Kim, and Dong Ho Kim. "An Experimental Study on Material Compatibility of R1233zd(E) with Lubricant/Polymers." Korean Journal of Air-Conditioning and Refrigeration Engineering 31, no. 11 (2019): 497–505. http://dx.doi.org/10.6110/kjacr.2019.31.11.497.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Racovitza, Alexandru, Horatiu Pop, Valentin Apostol, Tudor Prisecaru, and Daniel Taban. "Comparison between Organic Working Fluids in order to Improve Waste Heat Recovery from Internal Combustion Engines by means of Rankine Cycle Systems." Revista de Chimie 71, no. 1 (2020): 113–21. http://dx.doi.org/10.37358/rc.20.1.7821.

Full text

Abstract:

The present works deals with waste heat recovery from internal combustion engines using Rankine cycle systems where working fluid are organic liquids (ORC). The first part of the paper presents the ORC technology as one of the most suitable procedure for waste heat recovery from exhaust gas of internal combustion engine (ICE). The particular engine considered in the present work is a turbocharged compression ignition engine mounted on an experimental setup. The working fluids for ORC system are: isobutene, propane, RE245fa2, RE245cb2, R245fa, R236fa, R365mfc, R1233zd(E), R1234yf and R1234ze(Z)

APA, Harvard, Vancouver, ISO, and other styles

5

Elbarghthi, Anas F. A., Mohammad Yousef Hdaib, and Václav Dvořák. "Heat Transfer Analysis between R744 and HFOs inside Plate Heat Exchangers." Entropy 24, no. 8 (2022): 1150. http://dx.doi.org/10.3390/e24081150.

Full text

Abstract:

Plate heat exchangers (PHE) are used for a wide range of applications, thus utilizing new and unique heat sources is of crucial importance. R744 has a low critical temperature, which makes its thermophysical properties variation smoother than other supercritical fluids. As a result, it can be used as a reliable hot stream for PHE, particularly at high temperatures. The local design approach was constructed via MATLAB integrated with the NIST database for real gases. Recently produced HFOs (R1234yf, R1234ze(E), R1234ze(Z), and R1233zd(E)) were utilized as cold fluids flowing through three phase

APA, Harvard, Vancouver, ISO, and other styles

6

Tsvetkov, O. B., V. V. Mitropov, A. O. Prostorova, and Yu A. laptev. "Thermal conductivity prediction of Trans-1-Chloro-3,3,3-Trifluoropropene (R1233zd (E))." Journal of Physics: Conference Series 1683 (December 2020): 032021. http://dx.doi.org/10.1088/1742-6596/1683/3/032021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Righetti, Giulia, Giovanni A. Longo, Claudio Zilio, Ryo Akasaka, and Simone Mancin. "R1233zd(E) flow boiling inside a 4.3 mm ID microfin tube." International Journal of Refrigeration 91 (July 2018): 69–79. http://dx.doi.org/10.1016/j.ijrefrig.2018.04.020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

He, Jiacheng, Chaobin Dang, and Eiji Hihara. "Supercritical heat transfer characteristics of R1233zd(E) in vertically upward flow." International Journal of Heat and Mass Transfer 127 (December 2018): 497–505. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.07.078.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kedzierski, M. A., and L. Lin. "Pool boiling of R515A, R1234ze(E), and R1233zd(E) on a reentrant cavity surface." International Journal of Heat and Mass Transfer 161 (November 2020): 120252. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.120252.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kondou, Chieko, Ryuichi Nagata, Noriko Nii, Shigeru Koyama, and Yukihiro Higashi. "Surface tension of low GWP refrigerants R1243zf, R1234ze(Z), and R1233zd(E)." International Journal of Refrigeration 53 (May 2015): 80–89. http://dx.doi.org/10.1016/j.ijrefrig.2015.01.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "R1233zd(E)"

1

Mahmoudian, Jafar. "Analytical and Experimental Evaluation of Ejector Refrigeration System using Environmentally Friendly Fluid." Doctoral thesis, 2020. http://hdl.handle.net/2158/1201684.

Full text

Abstract:

During the recent years the interest of industry and scientific community in refrigeration systems working with natural fluids has considerably grown because of the more and more strict regulations regarding environmentally safe refrigerants. This thesis mainly describes a theoretical and experimental investi-gation of the jet pump refrigerator, and the application of Com-putational Fluid Dynamic (CFD) to validate the performance of the system. The present work is divided into two main parts plus introduction chapter which is devoted to literature reviews and theoretical concept of refrigerat

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "R1233zd(E)"

1

Jain, Pradeep Kumar, Akhilesh Arora, and B. B. Arora. "Performance Analysis of ORC with Environment-Friendly Working Fluids Novec 649 and R1233zd[E] as Alternative to R245fa." In Lecture Notes in Civil Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7557-6_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "R1233zd(E)"

1

Amalfi, Raffaele L., Cong H. Hoang, Ryan Enright, et al. "Experimental Characterization of a Compact Thermosyphon Cooling System Operating with R1234ze(E) and R1233zd(E) Low-GWP Refrigerants." In 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm). IEEE, 2022. http://dx.doi.org/10.1109/itherm54085.2022.9899592.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Alvarez-Regueiro, Eva, Bijie Yang, Esperanza Barrera-Medrano, Ricardo Martinez-Botas, and Srithar Rajoo. "Optimisation of an ORC Radial Turbine Using a Reduced-Order Model Coupled With CFD." In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-80944.

Full text

Abstract:

Abstract This paper presents the geometry optimisation of a single stage radial turbine for an Organic Ranking Cycle system operating over a pressure ratio of 9. The specific fluid used in this investigation is R1233zd (E), but the methodology applies to other organic fluids as well. The ORC system is used to recover excess waste heat from the operation of an offshore oil and gas platform in the gulf of Thailand and its conditions will be replicated at pilot plant level. The geometry is optimised for the highest total-to-static efficiency using non gradient based algorithms to allow for wide d

APA, Harvard, Vancouver, ISO, and other styles

3

Mwesigye, Aggrey, and Seth B. Dworkin. "Energetic and Exergetic Performance Comparison of an Ejector Refrigeration System Using Modern Low GWP Refrigerants." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10542.

Full text

Abstract:

Abstract In this study, a novel model is used to precisely predict the performance of an ejector refrigeration system utilizing modern environmentally benign working fluids in both the critical and subcritical modes of operation. Energetic and exergetic performance of low global warming potential and non-ozone depleting HCFO and HFO refrigerants: R1233zd(E), R1224yd(Z), R1225ye(Z), hydrocarbon refrigerants: Isobutane and Isopentane and RE245cb2 is compared with that of conventional refrigerants: R141b and R245fa. The model takes the ejector area ratios, generator pressure, and evaporator press

APA, Harvard, Vancouver, ISO, and other styles

4

Minazzo, Enzo M., Gautier Rouaze, Jackson B. Marcinichen, John R. Thome, and L. Winston Zhang. "Compact and Highly Thermal-Hydraulic Efficient Air-Cooled Closed Loop Thermosyphon Cooling System for High Intense Heat Load Dissipation of Future Microprocessors." In ASME 2022 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/ipack2022-97364.

Full text

Abstract:

Abstract A very compact air-cooled loop thermosyphon cooling system (LTS) was designed, prototyped and tested for microprocessor cooling application. It was designed specifically for 2U servers and heat loads up to 400 W in a footprint area of 40 mm per 40 mm. The low pressure and low GWP working fluid R1233zd(E) was used. Tests were done for two ambient temperatures (22 °C and 40 °C) and included optimal charge determination as well as extensive tests at optimal charge. Values of performance ratio, simply defined as heat load divided by fan power consumption, higher than 30 were observed for

APA, Harvard, Vancouver, ISO, and other styles

5

Tang, Weiyu, Wei Li, and Jianxin Zhou. "Evaluation of Frictional Pressure Drop Correlations During Flow Boiling of Refrigerants in Micro-Fin Tubes." In ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/fedsm2020-20130.

Full text

Abstract:

Abstract Due to the widely commercial application of micro-fin tube and eco-friendly refrigerants, more general frictional pressure drop correlations is demanded for better prediction, and this study is aimed at compared existing correlations and provide guides for the furthermore improvement. Experimental data points for frictional pressure drop during flow boiling of refrigerants in horizontal micro-fin tubes were extracted from literature and our previous experimental work to evaluate numerous existing frictional pressure drop correlations and specify their applicability to meet the urgent

APA, Harvard, Vancouver, ISO, and other styles

6

Ferreira, Julio, Massoud Kaviany, Vincent Dupont, Olivier de Laet, Thomas Nicolle, and Erik Yen. "A Loop Heat Pipe for Vehicle CPU Cooling: Peak Performance and Partial Flooding and Dryout Regimes." In ASME 2022 Heat Transfer Summer Conference collocated with the ASME 2022 16th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/ht2022-83836.

Full text

Abstract:

Abstract A Loop Heat Pipe (LHP) is assembled and tested for removing up to 400 W from two vehicle CPUs, while keeping their temperature under 95°C and using a 2 m-distanced, 45°C-air cooled condenser, and working fluid R1233zd(E). The capillary evaporator wick uses a liquid artery wick supplying liquid to a sawtooth copper wall evaporator. This novel sawtooth structure extends the evaporation area, spreads the liquid, and allows for the vapor escape space, while minimizing the evaporator resistance. For the application flexibility, it is preferred to place the condenser away from the CPUs. The

APA, Harvard, Vancouver, ISO, and other styles

7

Robertson, Miles C., Peter J. Newton, Tao Chen, and Ricardo F. Martinez-Botas. "Development and Commissioning of a Blowdown Facility for Dense Gas Vapours." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-91609.

Full text

Abstract:

Abstract The Organic Rankine Cycle is a candidate technology for low grade heat recovery, from sources as diverse as geothermal, solar and industrial/vehicle waste heat. The organic working fluids used within these systems often display significant real-gas effects, especially in proximity of the thermodynamic critical point. Significant research has therefore been performed on the design of real-gas expansion devices, including both positive displacement and rotordynamic machinery. 3D Computational Fluid Dynamics (CFD) is commonly used for performance prediction and flow field analysis within

APA, Harvard, Vancouver, ISO, and other styles

8

Bianchi, M., L. Branchini, A. De Pascale, et al. "Energy Recovery in Natural Gas Compressor Stations Taking Advantage of Organic Rankine Cycle: Preliminary Design Analysis." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-64245.

Full text

Abstract:

Gas compressor stations represent a huge potential for exhaust heat recovery. Typical installations consist of open cycle configurations with multiple gas turbine units, usually operated under part-load conditions during the year with limited conversion efficiency. At least, one of the installed unit serves as back-up to ensure the necessary reserve power and the safe operation of the station. Organic Rankine Cycle (ORC) has been proven as an economical and environmentally friendly solution to recover waste heat from gas turbines, improving the overall energy system performance and reducing th

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "R1233zd(E)"

1

Kedzierski, Mark A., and Lingnan Lin. Pool Boiling of R515A, R1234ze(E) and R1233zd(E) on a Reentrant Cavity Surface; Extensive Measurement and Analysis. National Institute of Standards and Technology, 2019. http://dx.doi.org/10.6028/nist.tn.2063.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!