Academic literature on the topic 'Racionalizace technologie'

ResumoO prisma das mudanças impressas pelas eras digital e pós-digital é imenso e infindável, porém, a magnitude de envolvimento com as tecnologias depende do modo como se tem acesso às informações e dos arranjos sociais deflagrados pela necessidade de adaptação aos novos paradigmas. Entretanto, nem sempre, esses avanços foram pautados apenas nas necessidades humanas de resolver algum tipo de problema. Em algum momento e de alguma forma, percebe-se que a fonte de inspiração para a materialização desses recursos extrapola o âmbito da necessidade e se estabelece nas esferas do desejo e do prazer. Pensar como o Profissional da área de Motricidade Humana se insere neste contexto e se apropria dos recursos digitais para atualizar e dinamizar sua prática, representou o desafio deste ensaio, haja vista que esta relação ainda causa estranheza e necessita mais aprofundamento.Palavras-chave: Motricidade Humana. Ambiente Virtual. Lazer. Educação. Formação Profissional.(Post) human motricity and the body approach in the age of simulationAbstractThe prism of the changes printed by digital and post-digital ages is immense and endless, but the magnitude of involvement with technologies depends on the way information is accessed and the social arrangements triggered by the need to adapt to new paradigms. However, not always, these advances were based only on human needs to solve some kind of problem. At some point and in some way, it can be seen that the source of inspiration for the materialization of these resources goes beyond the realm of necessity and is established in the spheres of desire and pleasure. Thinking how Human Motricity Professional fits into this context and appropriates digital resources to update and streamline their practice, represented the challenge of this essay, given that this relationship still causes strangeness and needs further study.Keywords: Human Motricity. Virtual environment. Recreation. Education. Professional qualification.La motricidad (post)humana y el enfoque del cuerpo en la era de la simulaciónResumenEl prisma de los cambios impresos por la era digital y post-digital es inmenso e interminable, pero la magnitud de la participación con las tecnologías depende de la forma en que se accede a la información y los arreglos sociales provocados por la necesidad de adaptarse a nuevos paradigmas. Sin embargo, no siempre, estos avances se basaron solo en las necesidades humanas para resolver algún tipo de problema. En algún momento y de alguna manera, se puede ver que la fuente de inspiración para la materialización de estos recursos va más allá del ámbito de la necesidad y se establece en las esferas del deseo y el placer. Pensar cómo el Profesional de la Motricidad Humana encaja en este contexto y se apropia de los recursos digitales para actualizar y racionalizar su práctica, representó el desafío de este ensayo, dado que esta relación todavía causa extrañeza y necesita más estudio.Palabras clave: Motricidad humana. Entorno virtual Ocio Educación. Formación profesional.

RESUMENEl texto plantea una mirada crítica al papel actual de la partitura convencional occidental dentro de la educación musical formal y, propone, a partir de una reflexión sobre el carácter ontológico de la partitura como herramienta de uso descriptivo y prescriptivo (siguiendo la propuesta del musicólogo Charles Seeger), tres consecuencias pedagógicas que se desprenden de relativizar la importancia de la partitura en los tiempos actuales: ampliar la noción de notación musical, privilegiar una educación musical sonoro-corporal, y hacer un uso mayor de las nuevas tecnologías de grabación y reproducción en el aula. La conclusión es que una relativización de la partitura debe llevarnos a una educación musical necesariamente menos racionalizada y más sonoro-corporal, menos leída y más vivida.PALABRAS CLAVEMúsica, educación musical, partituras, pedagogía.RELATED TO SCORE SIGNIFICANCE IN MUSICAL EDUCATION: SOME PEDAGOGICAL CONSEQUENCESABSTRACTThis written piece of work proposes a critic look at the actual role the occidental conventional score has in the formal education level. Moreover, following Charles Seeger’s musicologist proposal, this text also intends to show a reflection on the ontological character of scores as a tool of descriptive and prescriptive use, resulting three pedagogical consequences appearing from making the score importance relative at present. In other words, widening the musical notation notion, giving privilege to a resonant-corporal musical education, and insisting on a better use of technologies in recording and reproduction techniques in the classroom. As a final point, it is important to highlight that making the score importance relative can lead us to a resonantcorporal education instead of to a rationalized one which consequently may not be widely read but lived. KEY WORDSMusic, musical education, scores, pedagogy. RELATIVIZACIÓN AJAI MINISTIDU IACHACHINGAPA TUNAPI TUKUIKUNATA KAWANCHINGAPAMAILLALLACHISKA Ninakumi imasami kawankuna mana allilla kai kilkaita,tukuikuna iachachispa allilla kaachispa parlaspa kusaikuna suti intilógia sug rurai ministdu sug runa suti Charles Seeger, rimariska pai iachachi kallarigapa tukui munaskakunata tunai rurangapa Maskaspa iachachingapa kunauramanda kunata, kachu mas kilkaska kausaskata parlachukuna Chasa allilla kawaringami.RIMANGAPA MINISTISKAKUNATunai tunangapa ichachii, ruraikuna pintai allilla kawaspa iachaikui.RELATIVITÉ DE L’IMPORTANCE DE LA PARTITION DANS L’ÉDUCATION MUSICALE. LES CONSÉQUENCES PÉDAGOGIQUESRÉSUMÉLe texte propose un regard critique au rôle actuel de la partition conventionnelle d’occident dans l’éducation musicale formelle. Formule á partir de la réflexion sur le caractère ontologique de la partition comme un outil d’usage descriptif et prescriptif (en suivant la proposition du musicologue Charles SEEGER) Trois conséquences pédagogiques qui se détachent de relativiser l’importance de la partition actuellement : 1) Élargir la connaissance de notation musicale, 2) Privilégier une éducation musicale sonore-corporelle et 3) Faire une utilisation plus vaste des technologies d’enregistrement dans la salle de classe. En conclusion, une relativisation de la partition doit nous verser à une éducation musicale moins rationalisée et plus sonore-corporelle, moins lue et plus vécue.MOTS CLÉSMusique, éducation en musique, partition, pédagogie.

This thesis deals with the rationalization of production technology of selected component. The first part contains a brief introduction of the company NTS Prometal Machining s.r.o. and brief description of the product. The following section is an analysis of existing manufacturing technology. The practical part is focusing on the proposal of rationalization versions of the production process. After evaluation of all possible options of rationalization there has been developed a new technological process with a respect to time and cost savings. Finally there was carried out economical evaluation and recommendation for further production of this component.

Master's thesis focus on the rationalisation of the holes drilling technology in the bearing rings which are defined for wind generators. This work contains review of drilling tools, analysis of the current state and proposal of rationalising precautions. Rationalising precautions are focused mainly on the adequate choice of the drilling technology and applied tools. The most suitable option was chosen for the drilling of holes according to the economical evaluation.

This diploma thesis is focused on a design of rationalization solutions for machining workplace in Siemens Company. The machined pieces are shafts, the basic components of the electric motors. The introductory part of this study describes the theoretical basics of machining technology, especially milling. The next part is focused on the company presentation, the analysis of the existing workplace and its technologies and components. In the following section are selected weaker production sites, and then is presented opportunities for improvement and rationalization of this workplace. Following the elaboration of the selected rationalization solution, along with techno – economic evaluation of the production change, which highlights the results of this study.

In the introductory part of the thesis, there is a description of machining technologies used in the production of body. This is followed by a detailed analyse of the current technology of production of this component with an emphasis on finding its problematic parts, including a proposal of the options of the rationalization. After the methods of rationalization assesment, a new technological process was developed and the alternative tools were proposed. Considerable time and money savings were achieved by this rationalization. In the discussion section, there were designed some options of solving problems arising during the installation of this rationalization into working.

The diploma thesis Rationalization technology of production tools is divided into two parts. The first part is focused on injection molding of plastic materials and analysis current status of production injection tools. The second part contains proposal of rationalization steps in the production process and evaluation of rationalization.

Analysis of the technological possibility ray methods of protoplasm, laser and water jet on the part of needs company Pars Nova a.s.. Propsal concrete of unconventional method. Process layout and exigencies of working designed method. Security and ecological diversification of designed method. Technical – economics evaluation contribution designed of unconventional technology.

The thesis discusses the possibility of a rationalizing of a production of handguns in the conditions of the Česká zbrojovka, a.s. company. In the beginning of the theoretical part, it deals with a familiarization with CZUB, its subsidiaries and a manufacturing portfolio. The following is a division of weapons, a describe of components of firearms and their method of a production. The practical part focuses on the possible rationalization of a production of components of a trigger, a hammer and a magazine catch. After analyzing the current situation in the company, the individual variants of the new technologies are described theoretically first of all. The technological processes for each component at each considered technology are created for these new variants. The following is the calculation of the required values for the final comparison. The final part is the technical-economic evaluation, which compares various technological options among themselves. In the final discussion, the possibility of the individual technologies and their implementation risks in the production process are mentioned.

The thesis focuses on the technology of production of the turbine-type component in Edwards company. It specifically focuses on the part of the turning production, in which in the first part an analysis of the component and the technologicity of its construction is created. Problematic aspects are analysed in terms of material structure and procedure technology. An evaluation of the former and the new supplier is made in terms of rationalization of material structure and their statistical evaluation of rationalization improvement towards keeping to geometrical tolerances. Grooving tools greatly influence the overall machining time during turning. An experiment is made to find out the measured values of the radial forces, the process of chip formation and surface roughness during grooving. The technology of procedure further deals with rationalization of the current machine OKUMA LU25-M and purchase of a new machine Mori Seiki NTX 2000, for which new tool equipment is made in cooperation with Walter company. The final technical-economical evaluation sums up all findings from the research of the given issue. In the discussion, further continuation is suggested for the research in the development and for the continuously controlled component productivity.