Log in

Relevant bibliographies by topics / Radial slide bearing

Contents

Journal articles

Academic literature on the topic 'Radial slide bearing'

Author: Grafiati

Published: 4 June 2021

Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Radial slide bearing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Radial slide bearing"

1

Bielawski, Piotr. "Marine Propulsion System Vibration Sensor Heads." New Trends in Production Engineering 1, no. 1 (2018): 729–37. http://dx.doi.org/10.2478/ntpe-2018-0092.

Full text

Abstract:

Abstract Vibration symptoms are the main symptoms used for diagnosing machines. This applies mainly to vibrations of non-rotating machines. Symptoms of rotating element vibrations are used in a limited scope, while mostly used are the symptoms of radial vibrations of rotating shafts. Across industries, the use of technical vibration diagnosis varies. Marine propulsion systems are poorly equipped with diagnostic equipment of that type. One of the main reasons is lack of appropriate sensors. The study presents two solutions of sensor heads. One solution applies to a sensor head built into the fr

APA, Harvard, Vancouver, ISO, and other styles

2

Akhverdiev, K. S., A. Yu Vovk, M. A. Mukutadze, and M. A. Savenkova. "Analytical technique for predicting the value of micropolar lubrication criteria providing stable operation of a radial slide bearing." Journal of Friction and Wear 29, no. 2 (2008): 140–45. http://dx.doi.org/10.3103/s1068366608020116.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Chen, Ke, Guojun Zhang, Haishuo Wang, Rui Wu, Hongmei Zheng, and Shunhua Chen. "Numerical and Experimental Investigations on Dynamic Response of Hydraulic Cylinder with 3D Spatial Joints considering Radial and Axial Clearances." Shock and Vibration 2019 (December 17, 2019): 1–24. http://dx.doi.org/10.1155/2019/1204328.

Full text

Abstract:

Radial clearance, particularly the axial clearance in the 3D joint of a mechanism owing to the assemblage, manufacturing tolerances, wear, and other conditions, has become a research focus in the field of multibody dynamics in recent years. In this study, a hydraulic cylinder model with 3D clearance joints was constructed by combining various potential contact scenarios. The novelty of this study is that potential contact points between the bearing wall and journal were calculated when the bearing wall circle was projected to an ellipse owing to misalignment of axes. Moreover, the simulation m

APA, Harvard, Vancouver, ISO, and other styles

4

Novotny, P. "Mixed Lubrication Solution of Dynamically Loaded Radial Slide Bearings." Tribology in Industry 39, no. 1 (2017): 82–89. http://dx.doi.org/10.24874/ti.2017.39.01.09.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tagawa, Norio, Takefumi Hayashi, and Atsunobu Mori. "Effects of Moving Three-Dimensional Nano-Textured Disk Surfaces on Thin Film Gas Lubrication Characteristics for Flying Head Slider Bearings in Magnetic Disk Storage." Journal of Tribology 123, no. 1 (2000): 151–58. http://dx.doi.org/10.1115/1.1326442.

Full text

Abstract:

This paper describes the effects of moving three-dimensional nano-textured or patterned disk surfaces on thin film gas lubrication characteristics for flying head slider bearings in magnetic disk storage. In order to perform the most realistic simulation of slider flying characteristics over the textured disk surfaces, the direct numerical simulation method is used, instead of using various averaging techniques. Therefore, a deterministic description of the texture is adopted in this study. A dynamic analysis of the slider responses can be carried out, by solving the air bearing equation based

APA, Harvard, Vancouver, ISO, and other styles

6

Lagunova, E. O., and M. A. Mukutadze. "Calculation of a Radial Slider Bearing with a Fusible Coating." Journal of Friction and Wear 40, no. 1 (2019): 88–94. http://dx.doi.org/10.3103/s1068366619010112.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

SHI, B. J., D. W. SHU, B. GU, et al. "STATIC AND DYNAMIC ANALYIS OF AIR BEARING SLIDER FOR SMALL FORM FACTOR DRIVES." International Journal of Modern Physics B 22, no. 09n11 (2008): 1391–96. http://dx.doi.org/10.1142/s0217979208046827.

Full text

Abstract:

As the areal recording density increases in hard disk drives (HDDs), the flying physical spacing between the head and the disk decreases and the likelihood of head-disk contact during full speed rotation increases. Therefore, the simulation and modeling of the air bearing slider with ultra-low flying heights becomes an important issue for the operational shock simulation. The static/dynamic properties, including the influence of the radial position and the skew angle of the slider, the rotating speed of the disk, and the shock simulation, of the air bearing slider were analyzed. Generally spea

APA, Harvard, Vancouver, ISO, and other styles

8

Reichelt, Michael, Markus Windisch, Günter Offner, and Sarah Santner. "A multigrid method for elasto-hydrodynamic contact simulations of radial slider bearing." ETNA - Electronic Transactions on Numerical Analysis 54 (2021): 355–69. http://dx.doi.org/10.1553/etna_vol54s355.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Jurdana, Vedran, Neven Bulic, and Wolfgang Gruber. "Topology Choice and Optimization of a Bearingless Flux-Switching Motor with a Combined Winding Set." Machines 6, no. 4 (2018): 57. http://dx.doi.org/10.3390/machines6040057.

Full text

Abstract:

The purpose of this paper is to choose a new topology for bearingless flux-switching slice motors, regarding the number of stator and rotor poles, with a combined winding set. Additionally, the selected motor topology is optimized with finite element method (FEM) simulations to improve the performance. Bearingless slice drives feature a magnetically-suspended rotor disk passively stabilized by reluctance forces due to a permanent magnet (PM) bias flux in the air gap and actively controlled by the generation of radial bearing forces and motor torque. Usage of the combined winding set, where eac

APA, Harvard, Vancouver, ISO, and other styles

10

Offner, Günter, and Oliver Knaus. "A Generic Friction Model for Radial Slider Bearing Simulation Considering Elastic and Plastic Deformation." Lubricants 3, no. 3 (2015): 522–38. http://dx.doi.org/10.3390/lubricants3030522.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!