Relevant bibliographies by topics / Radio front-end

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Radio front-end'

Author: Grafiati
Published: 4 June 2021
Last updated: 18 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Radio front-end.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Radio front-end"

1

Xu, Wei, and Chun Feng Jiang. "Design of Broadband RF Front-End." Applied Mechanics and Materials 602-605 (August 2014): 2816–19. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.2816.

Full text
Abstract:
With the rapid development of communication technology, software radio technology had become more and more widespread. This paper firstly studied the software radio technology, described its key ideas and main technologies, and then analyzed the broadband RF front-end as an important component of the software radio technology, designed the architecture of RF front-end. The experiment result proved it could improve the quality of signal effectively.
APA, Harvard, Vancouver, ISO, and other styles
2

Diet, Antoine M., Nicolas Ribière-Tharaud, Martine Villegas, and Geneviève Baudoin. "Front-end HPA/antenna for multi-radio." International Journal of Microwave and Wireless Technologies 4, no. 5 (May 1, 2012): 483–93. http://dx.doi.org/10.1017/s1759078712000372.

Full text
Abstract:
This paper focuses on multi-radio front-end transmitter, a function implied by cognitive radio (0.5–6 GHz). S and C bands standards (wireless local and metropolitan area networks) present a challenge, due to the signal modulation schemes (orthogonal frequency division multiplex (OFDM)/WCDMA, wideband code division multiple access) dynamic (tens of dBs), driving us to a mandatory transmitter linearization. The idea is to provide frequency, flexibility, and average power control of a multi-radio high-efficiency front end for such signals (polar/envelope elimination and restoration (EER) structure). The study implies antennas design and average power control demonstration. Based on a switched mode power amplifier (PA), a discrete detuning is possible to adapt the PA at both “WiMAX” and “Wifi5” frequencies. This architecture amplifies signals with amplitude information. This is coded here by the ΣΔ/PWM (pulse width modulation) technique, to present a constant envelope signal. The amplitude information is restored by a pass-band radio frequency (RF) filter. The antenna can be designed with a notch, to reduce the filtering constraints (selectivity and standards coexistences) and to help in the restoration of amplitude information. Average power control is illustrated by voltage supply variation and results are a possible dynamic of 9.5 dB. To complete the analysis, the simulation of the propagation channel, including antennas, with CST (free space, line of sight) is imported under AGILENT-ADS.
APA, Harvard, Vancouver, ISO, and other styles
3

Streifinger, M., T. Müller, J. F. Luy, and E. M. Biebl. "A software-radio front-end for microwave applications." Advances in Radio Science 1 (May 5, 2003): 201–5. http://dx.doi.org/10.5194/ars-1-201-2003.

Full text
Abstract:
Abstract. In modern communication, sensor and signal processing systems digitisation methods are gaining importance. They allow for building software configurable systems and provide better stability and reproducibility. Moreover digital front-ends cover a wider range of applications and have better performance compared with analog ones. The quest for new architectures in radio frequency front-ends is a clear consequence of the ever increasing number of different standards and the resulting task to provide a platform which covers as many standards as possible. At microwave frequencies, in particular at frequencies beyond 10 GHz, no direct sampling receivers are available yet. A look at the roadmap of the development of commercial analog-to-digital-converters (ADC) shows clearly, that they can neither be expected in near future. We present a novel architecture, which is capable of direct sampling of band-limited signals at frequencies beyond 10 GHz by means of an over-sampling technique. The wellknown Nyquist criterion states that wide-band digitisation of an RF-signal with a maximum frequency ƒ requires a minimum sampling rate of 2 · ƒ . But for a band-limited signal of bandwidth B the demands for the minimum sampling rate of the ADC relax to the value 2 · B. Employing a noise-forming sigma-delta ADC architecture even with a 1-bit-ADC a signal-to-noise ratio sufficient for many applications can be achieved. The key component of this architecture is the sample-and-hold switch. The required bandwidth of this switch must be well above 2 · ƒ . We designed, fabricated and characterized a preliminary demonstrator for the ISM-band at 2.4 GHz employing silicon Schottky diodes as a switch and SiGe-based MMICs as impedance transformers and comparators. Simulated and measured results will be presented.
APA, Harvard, Vancouver, ISO, and other styles
4

Hentschel, T., M. Henker, and G. Fettweis. "The digital front-end of software radio terminals." IEEE Personal Communications 6, no. 4 (1999): 40–46. http://dx.doi.org/10.1109/98.788214.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wikborg, E. B., V. K. Semenov, and K. K. Likharev. "RSFQ front-end for a software radio receiver." IEEE Transactions on Appiled Superconductivity 9, no. 2 (June 1999): 3615–18. http://dx.doi.org/10.1109/77.783811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hsu, Rick C. J., Ali Ayazi, Bijan Houshmand, and Bahram Jalali. "All-dielectric photonic-assisted radio front-end technology." Nature Photonics 1, no. 9 (August 19, 2007): 535–38. http://dx.doi.org/10.1038/nphoton.2007.145.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tawk, Y., M. Bkassiny, G. El-Howayek, S. K. Jayaweera, K. Avery, and C. G. Christodoulou. "Reconfigurable front-end antennas for cognitive radio applications." IET Microwaves, Antennas & Propagation 5, no. 8 (2011): 985. http://dx.doi.org/10.1049/iet-map.2010.0358.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ting-Ping Liu and E. Westerwick. "5-GHz CMOS radio transceiver front-end chipset." IEEE Journal of Solid-State Circuits 35, no. 12 (December 2000): 1927–33. http://dx.doi.org/10.1109/4.890306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Iancu, Daniel, John Glossner, Gary Nacer, Stuart Stanley, Vitaly Kolashnikov, and Joe Hoane. "Software defined radio platform with wideband tunable front end." International Journal of Engineering & Technology 4, no. 1 (January 11, 2015): 97. http://dx.doi.org/10.14419/ijet.v4i1.4160.

Full text
Abstract:
The paper presents a Software Defined Radio (SDR) development platform with wideband tunable RF (Radio Frequency) front end. The platform is based on the SB3500 Multicore Multithreaded Vector Processor and it is intended to be used for a wide variety of communication protocols as: Time Division Duplexing/Frequency Division Duplexing Long Term Evolution (TDD/FDD LTE), Global Positioning System (GPS), Global System for Mobile/General Packet Radio Service (GSM/GPRS), Wireless Local Area Network (WLAN), Legacy Worldwide Interoperability for Microwave Access (WiMAX). As an example, we describe briefly the implementation of the LTE TDD/FDD communication protocol. As far as we know, this is the only LTE category 1 communication protocol entirely developed and executed in software (SW), without any hardware (HW) accelerators.
APA, Harvard, Vancouver, ISO, and other styles
10

Tan, G. H. "The multi frequency front end: a new type of front end for the Westerbork Synthesis Radio Telescope." International Astronomical Union Colloquium 131 (1991): 42–46. http://dx.doi.org/10.1017/s0252921100013038.

Full text
Abstract:
AbstractThe Westerbork Synthesis Radio Telescope will be equipped with new front ends. These front ends will cover 8 frequency bands in the range from 250 MHz to 8.6 GHz. For the frequency bands above 1.2 GHz the sensitivity of the instrument will be drastically improved. Two independent local oscillator systems make it possible to observe in two frequency bands simultaneously.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Radio front-end"

1

Imana, Eyosias Yoseph. "Cognitive RF Front-end Control." Diss., Virginia Tech, 2014. http://hdl.handle.net/10919/51121.

Full text
Abstract:
This research addresses the performance degradation in receivers due to poor selectivity. Poor selectivity is expected to be a primary limitation on the performance of Dynamic-Spectrum-Access (DSA) and millimeter wave (mmWave) technologies. Both DSA and mmWave are highly desired technologies because they can address the spectrum-deficit problem that is currently challenging the wireless industry. Accordingly, addressing poor receiver selectivity is necessary to expedite the adoption of these technologies into the main street of wireless. This research develops two receiver design concepts to enhance the performance of poorly-selective receivers. The first concept is called cognitive RF front-end control (CogRF). CogRF operates by cognitively controlling the local-oscillator and sampling frequencies in receivers. This research shows that CogRF can fulfil the objective of pre-selectors by minimizing the effects of weak and moderately-powered neighboring-channel signals on the desired signal. This research shows that CogRF can be an alternative to high-performance pre-selectors, and hence, CogRF is a viable architecture to implement reliable DSA and mmWave receivers. The theoretical design and hardware implementation of a cognitive engine and a spectrum sensor of CogRF are reported in this dissertation. Measurement results show that CogRF significantly reduces the rate of communication outage due to interference from neighboring-channel signals in poorly-selective receivers. The results also indicate that CogRF can enable a poorly-selective receiver to behave like a highly-selective receiver. The second receiver design concept addresses very strong neighboring-channel signals. The performance of poorly selective receivers can easily suffer due to a strong, unfiltered neighboring-channel signal. A strong neighboring-channel signal is likely for a DSA radio that is operating in military radar bands. Traditionally, strong neighboring signals are addressed using an Automatic-Gain-Control (AGC) that attempt to accommodate the strong received signal into the dynamic range of the receiver. However, this technique potentially desensitizes the receiver because it sacrifices the Signal-to-Noise-Ratio (SNR) of the desired signal. This research proposes the use of auxiliary-receive path to address strong neighboring-channel signals with minimal penalty on the SNR of the desired signal. Through simulation based analysis, and hardware-based measurement, this research shows that the proposed technique can provide significant improvement in the neighboring-channel-interference handling capability of the receiver.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
2

Karlsson, Magnus. "Ultra-wideband Antenna and Radio Front-end Systems." Doctoral thesis, Linköpings universitet, Institutionen för teknik och naturvetenskap, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10338.

Full text
Abstract:
The number of wireless communication applications increase steadily, leading to the competition for currently allocated frequency bands. Pressure on authorities around the world to permit communications in higher and wider frequency ranges to achieve higher wireless capacity than those existed in the past has resulted in several new specifications. The federal communication commission (FCC) in USA has unleashed the band 3.1-10.6 GHz for ultra-wideband radio (UWB) communications. The release has triggered a worldwide interest for UWB. Other regulatory instances throughout the world have issued use of UWB techniques as well. Capacity issues in form of data rate and latency have always been a bottleneck for broadened wireless-communication usages. New communication systems like UWB require larger bandwidth than what is normally utilized with traditional antenna techniques. The interest for compact consumer electronics is growing in the meantime, creating a demand on efficient and low profile antennas which can be integrated on a printed circuit board. In this thesis, some methods to extend the bandwidth and other antenna parameters associated with wideband usages are studied. Furthermore, methods on how to enhance the performance when one antenna-element is not enough are studied as well. The principle of antenna parallelism is demonstrated using both microstrip patch antennas and inverted-F antennas. Several techniques to combine the antennas in parallel have been evaluated. Firstly, a solution using power-splitters to form sub-arrays that covers one 500-MHz multi-band orthogonal frequency division multiplexing (OFDM) UWB is shown in Paper I. It is then proposed that the sub-bands are selected with a switching network. A more convenient method is to use the later developed frequency multiplexing technique as described in Paper V and VIII. Using the frequency multiplexing technique, selective connection of any number of antennas to a common junction is possible. The characteristic impedance is chosen freely, typically using a 50-Ω feed-line. Secondly, in Paper VIII a frequency-triplexed inverted-F antenna system is investigated to cover the Mode 1 multi-band UWB bandwidth 3.1-4.8 GHz. The antenna system is composed of three inverted-F antennas and a frequency triplexer including three 5th order bandpass filters. In Paper VI a printed circuit board integrated-triplexer for multi-band UWB radio is presented. The triplexer utilizes a microstrip network and three combined broadside- and edge-coupled filters. The triplexer is fully integrated in a four metal-layer printed circuit board with the minimum requirement on process tolerances. Furthermore, the system is built completely with distributed microstrips, i.e., no discrete components. Using the proposed solution an equal performance between the sub-bands is obtained. Finally suitable monopoles and dipoles are discussed and evaluated for UWB. In Paper X circular monopole and dipole antennas for UWB utilizing the flex-rigid concept are proposed. The flex-rigid concept combines flexible polyimide materials with the regular printed circuit board material. The antennas are placed entirely on the flexible part while the antenna ground plane and the dipole antenna balun are placed in the rigid part.
APA, Harvard, Vancouver, ISO, and other styles
3

Karlsson, Magnus. "Ultra-wideband antenna and radio front-end systems /." Norrköping : Department of Science and technology, Linköpings universitet, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10338.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Magalhães, José Pedro da Rocha. "Desenvolvimento de um front-end para cognitive radio." Master's thesis, Universidade de Aveiro, 2011. http://hdl.handle.net/10773/8817.

Full text
Abstract:
Mestrado em Engenharia Electrónica e Telecomunicações
Nesta tese de mestrado é apresentada uma proposta para novos Front-Ends em Software De ned Radio (SDR) baseado na teoria dos Bancos de Filtros Híbridos (HFB) e que permite aumentar a largura de banda de operação do rádio sem perdas em resolução e gama dinâmica. Para prova de conceito, são apresentados dois Front-Ends que dividem o sinal de entrada (da antena) em 8 ou 64 bandas contíguas em frequência. Ambos os casos permitem a operação para uma largura de banda de 400MHz e com resolução de 16 bits. A divisão do sinal de entrada em múltiplas bandas contíguas em frequência é o ponto fundamental no desenvolvimento deste receptor. Nos artigos de investigação de HFBs nunca foi abordada a forma como na prática o sinal de entrada é dividido. Nesta tese, é sugerido o multiplexer como o elemento que realiza essa divisão. Infelizmente, também o estado da arte dos multiplexers é muito limitado, estando o estudo dessa tecnologia restringido a realizações com Guias de Onda ou Filtros de Cavidades, con gurações que pecam pelas excessivas dimensões e peso. Assim, o objectivo fundamental desta tese passa pela criação de novos multiplexers de reduzidas dimensões, grande número de canais, simplicidade de sintonização e facilidade de replicação. São propostas versões em tecnologia planar e discreta que permitem a divisão do sinal de entrada em 4, 8 ou 16 bandas contíguas em frequência. Para cada multiplexer criado é depois analisado o seu enquadramento num Banco de Filtros Híbridos, isto é, são analisados os custos de distorção e aliasing associados à divisão e posterior reconstrução do sinal no domínio digital. Para esse efeito é usado um método que permite o cálculo dos ltros digitais de síntese a partir dos multiplexers analógicos desenhados, minimizando assim os erros na reconstrução do sinal. Para os casos dos multiplexers de 8 canais criados, os resultados em distorção e aliasing obtidos rondam valores médios entre 􀀀80dB e 􀀀100dB o que valida a proposta de Front-End de SDR com 8 canais. Para terminar, é sugerido uma nova estratégia para a gestão de espectro em Cognitive Radio que melhor se coaduna com a arquitectura do Front-End proposto e que permitirá uma melhor gestão do consumo de potência em dispositivos móveis que funcionem a bateria - caso crítico no Software Radio e Cognitive Radio. Em suma, os objectivos desta tese são a criação de novos multiplexers que facilitem o projecto de Front-Ends baseados na teoria dos Bancos de Filtros Híbridos, e que permitam um aumento da resolução e gama dinâmica do Software Radio relativamente aos padrões actuais da tecnologia.
In this master dissertation, a new Front-End for Sofware-De ned Radio (SDR) based on the Hybrid Filter Bank theory is proposed. This new Front-End has the ability to increase the radio operational bandwith without losing in resolution or dynamic range. For proof of concept, two Radio Front-Ends are proposed, splitting the incoming signal in 8 or 64 channels that are frequency contiguous. In both cases, a total bandwidth of 400 MHz and a resolution of 16 bits is achieved. The input signal splitting is the fundamental point of the radio's development. In scienti c publications on Hybrid Filter Banks it has never been revealed how in practice the signal is splited in contiguous bands. In this master dissertation it is sugested the use of frequency multiplexers to achieve that goal. Unfortunately, there is not much scienti c research on frequency multiplexers, as those studies are mostly based on Cavity Filters and Wave Guides whose dimentions are not proper for mobility purposes. Therefore, the main goal of this dissertation is to develop Frequency Multiplexers with reduced dimentions, a large number of channels, easy to tune and easy to replicate. It is proposed new multiplexers in planar and discrete technology with 4, 8 or 16 channels that are contiguous in frequency. For each developed multiplexer, the behaviour on a Hybrid Filter Bank system is tested. By analysing the distortion and aliasing results attached to the analogic deconstruction and digital reconstruction of the signal, one can conclude if the system is suitable for a radio aplication or not. To obtain better results, it is used a Hybrid Filter Bank method that automatically designs the synthesis (digital) lters by knowing only the analogic lters response. Using this method we can reduce the aliasing and distortion costs of the Hybrid Filter Bank. For the 8 channel Multiplexers, the aliasing and distortion measured was placed between -80dB and -100dB which validates the usage of those systems in a actual Software De ned Radio designs. Finally, a new strategy for spectrum management in Cognitive Radio that allows to reduce the power consup- tion of mobile devices is proposed. In short words, the main goal of this dissertation is to develop new multiplexers that will ease the design of new Software Radio Front-End based on the Hybrid Filter Bank theory.
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, Hyung Joon. "Multi-standard radio transceiver architectures and radio frequency front-end design." Connect to this title online, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1110399471.

Full text
Abstract:
Thesis (Ph. D.)--Ohio State University, 2005.
Title from first page of PDF file. Document formatted into pages; contains xv, 128 p.; also includes graphics (some col.). Includes bibliographical references (p. 125-128). Available online via OhioLINK's ETD Center
APA, Harvard, Vancouver, ISO, and other styles
6

Brisebois, Terrence. "Wideband RF Front End Daughterboard Based on the Motorola RFIC." Thesis, Virginia Tech, 2009. http://hdl.handle.net/10919/33943.

Full text
Abstract:
The goal of software-defined radio (SDR) is to move the processing of radio signals from the analog domain to the digital domain â to use digital microchips instead of analog circuit components. Until faster, higher-precision analog-to-digital (ADCs) and digital-to-analog converters (DACs) become affordable, however, some analog signal processing will be necessary. We still need to convert high-radio frequency (RF) signals that we receive to low intermediate-frequency (IF) or baseband (centered on zero Hz) signals in order for ADCs to sample them and feed them into microchips for processing. The reverse is true when we transmit. Amplification is also needed on the receive side to fully utilize the dynamic range of the ADC and power amplification is needed on the transmit side to increase the power output from the DAC for transmission. Analog filtering is also needed to avoid saturating the ADC or to filter out interference when receiving and to avoid transmitting spurs. The analog frequency conversion, amplification and filtering section of a radio is called the RF front end. This thesis describes work on a new RF front end daughterboard for the Universal Software Radio Peripheral, or USRP. The USRP is a software-radio hardware platform designed to be used with the GNU Radio software radio software package. Using the Motorola RFIC4 chip, the new daughterboard receives RF signals, converts them to baseband and does analog filtering and amplification before feeding the signal into the USRP for processing. The chip also takes transmit signals from the USRP, converts them from baseband to RF and amplifies and filters them. The board was designed and laid out by Randall Nealy. I wrote the software driver for GNU Radio. The driver defines the interface between the USRP and the RFIC chip, controls the physical settings, and calculates and sets the hundreds of variables necessary to operate this extremely complex chip correctly. It allows plug-and-play compatibility with the current USRP daughterboards and supplies additional functions not available in any other daughterboard.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
7

Abu-Al-Saud, Wajih Abdul-Elah. "Efficient Wideband Digital Front-End Transceivers for Software Radio Systems." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5257.

Full text
Abstract:
Software radios (SWR) have been proposed for wireless communication systems to enable them to operate according to incompatible wireless communication standards by implementing most analog functions in the digital section on software-reprogrammable hardware. However, this significantly increases the required computations for SWR functionality, mainly because of the digital front-end computationally intensive filtering functions, such as sample rate conversion (SRC), channelization, and equalization. For increasing the computational efficiency of SWR systems, two new SRC methods with better performance than conventional SRC methods are presented. In the first SRC method, we modify the conventional CIC filters to enable them to perform SRC on slightly oversampled signals efficiently. We also describe a SRC method with high efficiency for SRC by factors greater than unity at which SRC in SWR systems may be computationally demanding. This SRC method efficiently increases the sample rate of wideband signals, especially in SWR base station transmitters, by applying Lagrange interpolation for evaluating output samples hierarchically using a low-rate signal that is computed with low cost from the input signal. A new channelizer/synthesizer is also developed for extracting/combining frequency multiplexed channels in SWR transceivers. The efficiency of this channelizer/synthesizer, which uses modulated perfect reconstruction (PR) filter banks, is higher than polyphase filter banks (when applicable) for processing few channels, and significantly higher than discrete filter banks for processing any number of variable-bandwidth channels where polyphase filter banks are inapplicable. Because the available methods for designing modulated PR filter banks are inapplicable due to the required number of subchannels and stopband attenuation of the prototype filters, a new design method for these filter banks is introduced. This method is reliable and significantly faster than the existing methods. Modulated PR filter banks are also considered for implementing a frequency-domain block blind equalizer capable of equalizing SWR signals transmitted though channels with long impulse responses and severe intersymbol interference (ISI). This blind equalizer adapts by using separate sets of weights to correct for the magnitude and phase distortion of the channel. The adaptation of this blind equalizer is significantly more reliable and its computational requirements increase at a lower rate compared to conventional time-domain equalizers making it efficient for equalizing long channels that exhibit severe ISI.
APA, Harvard, Vancouver, ISO, and other styles
8

Backström, Anders, and Mats Ågesjö. "Design and implementation of a 5GHz radio front-end module." Thesis, Linköping University, Department of Science and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2635.

Full text
Abstract:

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate.

The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled. All measurements on the radio front-end and the test components are made using a network analyser, in order to measure the S-parameters.

This diploma work has resulted in a functional design and prototype, which has proved that designing systems for 5 GHz on a laminate substrate is possible but by no means trivial.

APA, Harvard, Vancouver, ISO, and other styles
9

Long, John R. (John Robert) Carleton University Dissertation Engineering Electronics. "A Narrowband radio receiver front-end for portable communications applications." Ottawa, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gopalan, Anand. "Built-in-self-test of RF front-end circuitry /." Link to online version, 2005. https://ritdml.rit.edu/dspace/handle/1850/942.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Radio front-end"

1

Digital front-end in wireless communication and broadcasting: Circuits and signal processing. Cambridge, UK: Cambridge University Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Roc, Berenguer, and Meléndez Juan 1974-, eds. GPS & Galileo: Dual RF front-end receiver and design, fabrication, and test. New York: McGraw-Hill, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sullivan, Love Janine, and Ajluni Cheryl J, eds. RF front-end: World class designs. Amsterdam: Newnes/Elsevier, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yao, Terry. Transmitter front-end ICs for 60-GHz radio. 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Switched-beam radiometer front-end network analysis. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

L, Bilbro G., and Langley Research Center, eds. Switched-beam radiometer front-end network analysis. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Amin, Mohammed Younis. The design of a front end for a cellular mobile radio transceiver. Bradford, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Integration Of Passive Rf Front End Components In Socs. Cambridge University Press, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Radio front-end"

1

Grayver, Eugene. "Radio Frequency Front End Architectures." In Implementing Software Defined Radio, 151–58. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4419-9332-8_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

König, Wolfgang, Gerd Wölfle, Christian Fischer, and Tim Hentschel. "Front End Architecture for a Software Defined Radio Base Station." In Software Radio, 315–27. London: Springer London, 2001. http://dx.doi.org/10.1007/978-1-4471-0343-1_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Badá, Anna Marina, and Marcello Donati. "The Software Radio Technique Applied to the RF Front-end for Cellular Mobile Systems." In Software Radio, 375–86. London: Springer London, 2001. http://dx.doi.org/10.1007/978-1-4471-0343-1_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schühler, Mario, Alexander Jaschke, and Alexander E. Popugaev. "Reconfigurable RF Receiver Front-end for Cognitive Radio." In Microelectronic Systems, 77–86. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23071-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Arriola, Aitor, Pedro Manuel Rodríguez, Raúl Torrego, Félix Casado, Zaloa Fernández, Mikel Mendicute, Eñaut Muxika, Juan Ignacio Sancho, and Iñaki Val. "FPGA-Based Cognitive Radio Platform with Reconfigurable Front-End and Antenna." In Computing Platforms for Software-Defined Radio, 165–87. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-49679-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Choi, Chang-Soon, Maxim Piz, and Eckhard Grass. "Non-Ideal Radio Frequency Front-End Models in 60GHz Systems." In 60 GHz Technology for Gbps WLAN and WPAN, 63–87. Chichester, UK: John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9780470972946.ch3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bagheri, Rahim, Ahmad Mirzaei, Saeed Chehrazi, and Asad A. Abidi. "Software-Defined Radio Receiver Architecture and RF-Analog Front-End Circuits." In Digitally-Assisted Analog and RF CMOS Circuit Design for Software-Defined Radio, 85–112. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-8514-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ferreira, Pietro Maris, Jack Ou, Christophe Gaquière, and Philippe Benabes. "Automated System-Level Design for Reliability: RF Front-End Application." In Computational Intelligence in Analog and Mixed-Signal (AMS) and Radio-Frequency (RF) Circuit Design, 363–89. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19872-9_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Raghunadh Machavaram, V., and Bheema Rao Nistala. "A Compact Low-Loss Onchip Bandpass Filter for 5GnR N79 Radio Front End Using IPD Technology." In Lecture Notes in Electrical Engineering, 469–77. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4775-1_50.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Transmitter/Receiver Analog Front End." In Radio Engineering, 161–205. Hoboken, NJ, USA: John Wiley & Sons, Inc, 2013. http://dx.doi.org/10.1002/9781118602218.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Radio front-end"

1

Meisal, K., C. Limbodal, T. Sverre Lande, and D. Wisland. "CMOS impulse radio receiver front-end." In 2005 NORCHIP. IEEE, 2005. http://dx.doi.org/10.1109/norchp.2005.1597007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kulkarni, Atharva, Sunil Pingale, Damayanti Gharpure, and Subramaniam Ananthakrishnan. "RF Front-End for SEAMS." In 2019 URSI Asia-Pacific Radio Science Conference (AP-RASC). IEEE, 2019. http://dx.doi.org/10.23919/ursiap-rasc.2019.8738262.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Opteynde, Frank. "A maximally-digital radio receiver front-end." In 2010 IEEE International Solid- State Circuits Conference - (ISSCC). IEEE, 2010. http://dx.doi.org/10.1109/isscc.2010.5433952.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhou, Shengyuan, Qiuming Zhao, Chengjian Mo, and Xing Wei. "A Wideband Front-End for Software Defined Radio." In 2010 6th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM). IEEE, 2010. http://dx.doi.org/10.1109/wicom.2010.5600852.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Anis, M., and R. Tielert. "Low power UWB pulse radio transceiver front-end." In ESSCIRC 2007 - 33rd European Solid-State Circuits Conference. IEEE, 2007. http://dx.doi.org/10.1109/esscirc.2007.4430263.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lohmiller, Peter, Ahmed Elsokary, Sebastien Chartier, and Hermann Schumacher. "Highly flexible cognitive radio spectrum sensing front-end." In 2014 IEEE Radio and Wireless Symposium (RWS). IEEE, 2014. http://dx.doi.org/10.1109/rws.2014.6830121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Marchand, Philippe, and Philippe Gouessant. "Single Chip 58 GHz Radio Relay Front End." In 30th European Microwave Conference, 2000. IEEE, 2000. http://dx.doi.org/10.1109/euma.2000.338751.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Manstretta, Danilo, and Li Lin. "Session: RMO2B: K-band front-end ICs." In 2014 IEEE Radio Frequency Integrated Circuits Symposium (RFIC). IEEE, 2014. http://dx.doi.org/10.1109/rfic.2014.6851660.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Zhaolong, and Ke Wu. "24GHz FMCW Radar Front-End System on Substrate." In 2007 IEEE Radio and Wireless Symposium. IEEE, 2007. http://dx.doi.org/10.1109/rws.2007.351810.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rabinkin, Daniel, and William Song. "Front-end non-linear distortion and array beamforming." In 2015 IEEE Radio and Wireless Symposium (RWS). IEEE, 2015. http://dx.doi.org/10.1109/rws.2015.7129730.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Radio front-end' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography