Relevant bibliographies by topics / Radio receiver system – Design

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Radio receiver system – Design'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Radio receiver system – Design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Radio receiver system – Design"

1

Haidar, Muhammad Alif. "Design of Hajj Monitoring System Based on Radio Communication." Jurnal Jartel: Jurnal Jaringan Telekomunikasi 4, no. 1 (2017): 69–75. http://dx.doi.org/10.33795/jartel.v4i1.196.

Full text
Abstract:
During the haj pilgrimage, pilgrims getting lost is a problem that often arises. This research created a system that can assist the team leader in monitoring the congregation haji from his entourage. In this system, the team leader and the congregation both have the same equipment using the HC-12 module for radio communication to detect pilgrims leaving the group andArduino Uno and ATmega8 microcontrollers for identification of the congregation. From the results of changing the transmission power and baud rate, the closest measured distance is 1.7 meters and the farthest is 51.1 meters. Each a
APA, Harvard, Vancouver, ISO, and other styles
2

Huang, You Jun, Ze Lun Li, and Zhi Cheng Huang. "Design of Remote Control Robot System." Advanced Materials Research 619 (December 2012): 321–24. http://dx.doi.org/10.4028/www.scientific.net/amr.619.321.

Full text
Abstract:
A remote control robot system is designed, and the operator uses the remote control radio transmitter module for remote operation, and after the radio receiver module receiving the signal, it can control the movements of the robot by the PLC instructions. The software system used STEP 7 Micro WIN SP6 as development platform to prepare the software program, and designed the robot hardware with the use of electronic circuit knowledge. The results show that the remote robot system is successful, and it can complete a variety of actions according to requires.
APA, Harvard, Vancouver, ISO, and other styles
3

Ding, You Hua, Peng Zhang, and Han Ao Xia. "The Design of Radar Intermediate Frequency Echo Simulator." Applied Mechanics and Materials 687-691 (November 2014): 4084–88. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.4084.

Full text
Abstract:
This paper has introduced a kind of method which can simulate the echo signal of radar receiver by the use of the Digital Radio Frequency Memory (DRFM) and Programable Logic Device (PLD).With the realization of actual circuit,the echo simulator can produce intermediate frequency and video signals.Therefore,with the help of the echo simulator, we can raise the detection ability of radar receiver system considerably. The structure of the simulator is simple but its function is great.The echo simulator can simulate intermediate frequency signals of radar receiver system for the first time.So the
APA, Harvard, Vancouver, ISO, and other styles
4

Jun, Luo, Lu Wen Jun, Ye Fei, Sun Shuang Xi, and Pe Dong Hui. "Design and Implementation of Wireless Channel Test System of UAV." Applied Mechanics and Materials 380-384 (August 2013): 757–60. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.757.

Full text
Abstract:
UAV wireless channel is the core of their communications systems, this paper designed a stepper adjustable independently programmable power attenuation device and contains three functional subsystems to achieve a radio channel test equipment for testing wireless channel launch power attenuation, receiver sensitivity and receiver bit error rate and other key technical indicators.
APA, Harvard, Vancouver, ISO, and other styles
5

Shi, Hong Mei. "The Design and Implementation of Spread Spectrum Communication System." Advanced Materials Research 933 (May 2014): 693–97. http://dx.doi.org/10.4028/www.scientific.net/amr.933.693.

Full text
Abstract:
The main research content of this article is to design a direct sequence spread spectrum communication system based on software radio technology. In this paper, design of spread spectrum receiver system directly to intermediate frequency sampling signal processing, after internal processing directly output transmission baseband signal information.
APA, Harvard, Vancouver, ISO, and other styles
6

Patmasari, Raditiana, Inung Wijayanto, R. S. Deanto, Y. P. Gautama, and Hurianti Vidyaningtyas. "Design and Realization of Automatic Packet Reporting System (APRS) for Sending Telemetry Data in Nano Satellite Communication System." Journal of Measurements, Electronics, Communications, and Systems 4, no. 1 (2018): 1. http://dx.doi.org/10.25124/jmecs.v4i1.1692.

Full text
Abstract:
To communicate with the ground station, nano satellite requires a communication system that serves in real time to regulate the procedure with ground station. One of the missions of nano satellites is the retrieval of telemetry data from sensors that transmitted using APRS technology (Automatic Packet Reporting System). We designed a prototype to monitor sensor by utilizing the APRS. Real-time sensor data was transmitted to monitor through radio using AX.25 protocol. On the transmitter side, an APRS Tracker integrated with a microprocessor ATMEGA 1284P to modulate the AFSK signal. The existenc
APA, Harvard, Vancouver, ISO, and other styles
7

Satya Narayana, P., M. N.V.S. Syam Kumar, A. Keerthi Kishan, and K. V.R.K. Suraj. "Design approach for wideband FM receiver using RTL-SDR and raspberry PI." International Journal of Engineering & Technology 7, no. 2.31 (2018): 9. http://dx.doi.org/10.14419/ijet.v7i2.31.13386.

Full text
Abstract:
Software defined radio replaced majority of hardware modules like mixers, filters, modulators and demodulators etc., with Software blocks in the field of radio electronics and communication. In this some or all the functionalities are Configurable using this software implemented on technologies like FPGAs, DSPs etc. Owing to lack of ease in implementing and reconfiguring huge hardware modules, we move on to implement an adaptable communication system with the help of SDR, as it can be easily configured to work with wide range of frequencies. We find various SDR transceiver modules which can be
APA, Harvard, Vancouver, ISO, and other styles
8

Duan, Mao Qiang, Xiao Li Huang, and Jian Jun Wang. "The Design and Implement for Transceiver of WIA-PA." Applied Mechanics and Materials 701-702 (December 2014): 1045–48. http://dx.doi.org/10.4028/www.scientific.net/amm.701-702.1045.

Full text
Abstract:
In this paper, the system scheme and system architecture for transceiver of WIA-PA are presented. The low-IF topology and direct up conversion method are employed, corresponding to receiver part and transmitter part. And in the baseband part, differential and correlation demodulate received signals, as well as time sync, frequency offset calibrate and frame sync operations are designed for solvation the problem of real radio environmental effects. The chip implements using 0.18μm CMOS process has small chip area and low power consumption. The minimum sensitivity of receiver is less than-85dBm
APA, Harvard, Vancouver, ISO, and other styles
9

ABBAS, Yasir M. O., and Kenichi Asami. "Design of Software-Defined Radio-Based Adaptable Packet Communication System for Small Satellites." Aerospace 8, no. 6 (2021): 159. http://dx.doi.org/10.3390/aerospace8060159.

Full text
Abstract:
Software-defined radio (SDR) devices have made a massive contribution to communication systems by reducing the cost and development time for radio frequency (RF) designs. SDRs opened the gate to programmers and enabled them to increase the capabilities of these easily manipulated systems. The next step is to upgrade the reconfigurability into adaptability, which is the focus of this paper. This research contributes to improving SDR-based systems by designing an adaptable packet communication transmitter and receiver that can utilize the communication window of CubeSats and small satellites. Ac
APA, Harvard, Vancouver, ISO, and other styles
10

Kong, Xiangming, Deying Zhang, and Mohin Ahmed. "A Software-Defined Radio System for Intravehicular Wireless Sensor Networks." International Journal of Digital Multimedia Broadcasting 2010 (2010): 1–8. http://dx.doi.org/10.1155/2010/934896.

Full text
Abstract:
An intra-vehicular wireless sensor network is designed and implemented on a software-defined radio system. IUWB signal is chosen to carry the data packets. The MAC layer of the system follows the specification of the IEEE802.15.4 standard. The transceiver design, especially the receiver design, is detailed in the paper. The system design is validated through lab test setup.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Radio receiver system – Design"

1

Van, Vuuren Lukas Martin. "Design of a receiver system for use in radio astronomy." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/96800.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hamied, Khalid Abdul-Ariz. "Advanced radio link design and radio receiver design for mobile communications." Diss., Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/15940.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mattos, Philip G. "A novel GPS receiver architecture : concept, design and implementation of a novel GPS receiver." Thesis, University of Bristol, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336231.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Akos, Dennis M. "A software radio approach to Global Navigation Satellite System receiver design." Ohio University / OhioLINK, 1997. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1174615606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mikkelsen, Eivind Brauer. "The Design of a Low Cost Beacon Receiver System using Software Defined Radio." Thesis, Norwegian University of Science and Technology, Department of Electronics and Telecommunications, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9984.

Full text
Abstract:
<p>Due to increase in ship traffic and activities related to oil and gas there is currently grate interest in the northern regions of Norway. Satellite communications to these areas i.e. north of the polar circle is however challenging due to low elevation angles and restricted visibility of geostationary satellites. Limited work has been done to study the propagation effects at theses latitudes and low elevation angles, especially at millimeter frequencies and for maritime communications. Some measurements have been conducted at Svalbard [5] and in Canada [5.1]. The studies from Svalbard wer
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Xiaopeng. "System and circuit design techniques for CMOS soft-ware radio receiver front-end /." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu148639852855606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ollars, Emil. "Design and characterization of a radio receiver for satellite communication." Thesis, Luleå tekniska universitet, Institutionen för system- och rymdteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-87007.

Full text
Abstract:
Due to the increase in volume and speed of data transmissions in recent years, the demand for high-speed satellite communication solutions has increased. This thesis investigates the possibility of making a receiver for satellite radio based on an Analog Devices ADC evaluation board. To do this, evaluation boards for each component were acquired and tested individually before connecting them. The system components include an I/Q demodulator, a local oscillator, and an ADC. Using these components a system design for the radio receiver has been proposed, and its performance analyzed. The SNR of
APA, Harvard, Vancouver, ISO, and other styles
8

Viswanatha, Raghunath. "Design and Simulation of Multi-Frequency Global Navigation Satellite System Receiver Radio Frequency Front-End." Ohio University / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1227298677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wu, Jingxian. "Optimum receiver design and performance analysis for wireless communication." Diss., Columbia, Mo. : University of Missouri-Columbia, 2005. http://hdl.handle.net/10355/4177.

Full text
Abstract:
Thesis (Ph. D.)--University of Missouri-Columbia, 2005.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (July 19, 2006) Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
10

Stieber, Marcel Colman Eric. "Radio Direction Finding Network Receiver Design for Low-cost Public Service Applications." DigitalCommons@CalPoly, 2012. https://digitalcommons.calpoly.edu/theses/889.

Full text
Abstract:
A low-cost radio direction finding (RDF) VHF receiver has been investigated for development into a radio direction finding network (RDFN) with a particular focus towards public service and commercial asset tracking applications. The primary design criteria were reproducibility, low-cost, and simplicity such that public service and volunteer organizations can benefit from the technology. Two receiver designs were built and tested to allow for comparison of practicality, cost, and accuracy. A pseudo-Doppler RDF and a time difference of arrival (TDOA) receiver were built as proof-of-concept for a
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Radio receiver system – Design"

1

Kalivas, Grigorios. Digital radio system design. J. Wiley, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

author, Plett Calvin, and Marsland Ian 1965 author, eds. Radio frequency system architecture and design. Artech House, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Johnson, C. Richard. Software receiver design: Build your own digital communication system in five easy steps. Cambridge University Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chiueh, Tzi-Dar. Baseband receiver design for wireless MIMO-OFDM communications. 2nd ed. Wiley, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Transceiver system design for digital communications. Noble Pub., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

1950-, Bullock Scott R., ed. Transceiver and system design for digital communications. 2nd ed. Noble Pub. Corp., 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Transceiver and system design for digital communications. 3rd ed. SciTech Pub., 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Transceiver and system design for digital communications. 4th ed. Scitech Publishing, an imprint of the IET, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Roc, Berenguer, and Meléndez Juan 1974-, eds. GPS & Galileo: Dual RF front-end receiver and design, fabrication, and test. McGraw-Hill, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

C, Dixon Robert. Radio receiver design. Marcel Dekker, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Radio receiver system – Design"

1

Fahim, Amr. "Wideband Receiver Design." In Radio Frequency Integrated Circuit Design for Cognitive Radio Systems. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11011-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Weigel, Robert, Andreas Springer, and Linus Maurer. "Radio Frequency Integrated Circuit System Design for UMTS Terminal Receivers." In Modeling, Simulation, and Optimization of Integrated Circuits. Birkhäuser Basel, 2003. http://dx.doi.org/10.1007/978-3-0348-8065-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rembovsky, Anatoly, Alexander Ashikhmin, Vladimir Kozmin, and Sergey Smolskiy. "Radio Receiver Applications for Radio Monitoring System." In Lecture Notes in Electrical Engineering. Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-98100-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lont, Maarten, Dusan Milosevic, and Arthur van Roermund. "Wake-up Receiver System Level Design." In Analog Circuits and Signal Processing. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06450-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Spiridon, Silvian. "A System-Level Perspective of Modern Receiver Building Blocks." In Toward 5G Software Defined Radio Receiver Front-Ends. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32759-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Louvros, Spiros, Vassilios Triantafyllou, and George Asimakopoulos. "Indoor Radio Design: LTE Perspective." In System-Level Design Methodologies for Telecommunication. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00663-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chuang, Gene C. H., Pan-An Ting, Ying-Chuan Hsiao, et al. "Mobile MIMO WiMAX System-on-Chip Design." In Baseband Receiver Design for Wireless MIMO-OFDM Communications. John Wiley & Sons Singapore Pte. Ltd., 2012. http://dx.doi.org/10.1002/9781118188194.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tretter, Steven A. "QAM Receiver I — General Description of Complete Receiver Block Diagram and Details of the Symbol Clock Recovery and Other Front-End Subsystems." In Communication System Design Using DSP Algorithms. Springer US, 2003. http://dx.doi.org/10.1007/978-1-4613-0229-2_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tretter, Steven A. "QAM Receiver I. General Description of Complete Receiver Block Diagram and Details of the Symbol Clock Recovery and Other Front-End Subsytems." In Communication System Design Using DSP Algorithms. Springer US, 1995. http://dx.doi.org/10.1007/978-1-4757-9763-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tretter, Steven A. "QAM Receiver II — The Passband Adaptive Equalizer and Carrier Recovery System." In Communication System Design Using DSP Algorithms. Springer US, 2003. http://dx.doi.org/10.1007/978-1-4613-0229-2_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Radio receiver system – Design"

1

Chen, Guangjin, Jincheng Dai, Kai Niu, and Chao Dong. "Optimal receiver design for SCMA system." In 2017 IEEE 28th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC). IEEE, 2017. http://dx.doi.org/10.1109/pimrc.2017.8292420.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Du, Haoming, Lintao Liu, Yuhan Gao, and Qiao Gong. "Radio Frequency System-On-Chip Design for Digital Receiver." In 2018 IEEE 3rd International Conference on Integrated Circuits and Microsystems (ICICM). IEEE, 2018. http://dx.doi.org/10.1109/icam.2018.8596652.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Razavi-Ghods, N. "Receiver System Design for Low Frequency Radio Astronomy Applications." In 2018 2nd URSI Atlantic Radio Science Meeting (AT-RASC). IEEE, 2018. http://dx.doi.org/10.23919/ursi-at-rasc.2018.8471449.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nazin, S. A., D. Morche, and A. Reinhardt. "Yield optimization for radio frequency receiver at system level." In 2012 Design, Automation & Test in Europe Conference & Exhibition (DATE 2012). IEEE, 2012. http://dx.doi.org/10.1109/date.2012.6176614.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schmidt-Knorreck, Carina, Daniel Knorreck, and Raymond Knopp. "IEEE 802.11p Receiver Design for Software Defined Radio Platforms." In 2012 15th Euromicro Conference on Digital System Design (DSD). IEEE, 2012. http://dx.doi.org/10.1109/dsd.2012.76.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Unawong, Miyamoto, and Morinaga. "Receiver design of CDMA system for impulsive radio noise environment." In Proceedings of International Symposium on Electromagnetic Compatibility. IEEE, 1997. http://dx.doi.org/10.1109/elmagc.1997.617150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Harun, H., S. M. Idrus, and A. B. Mohammad. "Optical Front-end Receiver Design for Radio over Fiber System." In 2007 5th Student Conference on Research and Development. IEEE, 2007. http://dx.doi.org/10.1109/scored.2007.4451438.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Boswell, J. "An advanced HF receiver design." In Sixth International Conference on `HF Radio Systems and Techniques'. IEE, 1994. http://dx.doi.org/10.1049/cp:19940462.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Barrak, Rim, Adel Ghazel, and Fadhel Ghannouchi. "Optimized multistandard RF subsampling radio receiver design." In 2005 12th IEEE International Conference on Electronics, Circuits and Systems (ICECS 2005). IEEE, 2005. http://dx.doi.org/10.1109/icecs.2005.4633521.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ayadi, Dorra, Saul Rodriguez, Mourad Loulou, and Mohammed Ismail. "System level design of radio frequency receiver for IEEE 802.16 standard." In 2008 3rd International Design and Test Workshop (IDT). IEEE, 2008. http://dx.doi.org/10.1109/idt.2008.4802471.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Radio receiver system – Design"

1

Hageman, Michael. Modular Digital Radio Frequency (RF) Receiver System (MODRFS) Program. System Architecture Definition Report. Defense Technical Information Center, 1999. http://dx.doi.org/10.21236/ada403917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Acosta, Jan P. Interference Cancellation System Design Using GNU Radio. Defense Technical Information Center, 2015. http://dx.doi.org/10.21236/ad1000133.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Roblyer, S. P. Functional design criteria 241-AP-102 Flexible Receiver System. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/28263.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rappaport, Theodore. Sponsored Research in Radio Propagation and System Design. Defense Technical Information Center, 1999. http://dx.doi.org/10.21236/ada394839.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gower, Neil. Packet Radio Integrated System Module (PRISM) - Design Document. Defense Technical Information Center, 1989. http://dx.doi.org/10.21236/ada214723.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cestaro, Ronald, and Jack Howard. Genetic Algorithm-Based System Design and Photonics-Based Receiver Technologies Program SETA Support. Defense Technical Information Center, 2005. http://dx.doi.org/10.21236/ada432273.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kistler, B. A user's manual for DELSOL3: A computer code for calculating the optical performance and optimal system design for solar thermal central receiver plants. Office of Scientific and Technical Information (OSTI), 1986. http://dx.doi.org/10.2172/7228886.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wilson, D., Daniel Breton, Lauren Waldrop, et al. Signal propagation modeling in complex, three-dimensional environments. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/40321.

Full text
Abstract:
The Signal Physics Representation in Uncertain and Complex Environments (SPRUCE) work unit, part of the U.S. Army Engineer Research and Development Center (ERDC) Army Terrestrial-Environmental Modeling and Intelligence System (ARTEMIS) work package, focused on the creation of a suite of three-dimensional (3D) signal and sensor performance modeling capabilities that realistically capture propagation physics in urban, mountainous, forested, and other complex terrain environments. This report describes many of the developed technical capabilities. Particular highlights are (1) creation of a Java
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Radio receiver system – Design' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography