Relevant bibliographies by topics / Rámy

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books

Academic literature on the topic 'Rámy'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 April 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Rámy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Rámy"

1

Procházková, Romana, and Andrea Pokorná. "The care of the periwound area." Dermatologie pro praxi 11, no. 4 (November 1, 2017): 204–8. http://dx.doi.org/10.36290/der.2017.037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mezera, Vojtěch, and Ivo Bureš. "Chronic non-healing wounds in geriatrics." Vnitřní lékařství 64, no. 11 (November 1, 2018): 1098–104. http://dx.doi.org/10.36290/vnl.2018.157.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tvrdá, Katarína. "Frame on Elastic Foundation / Rám Na Pružnom Podloží." Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series 12, no. 2 (December 1, 2012): 216–24. http://dx.doi.org/10.2478/v10160-012-0036-0.

Full text
Abstract:
Abstract This article deals with calculation of the beam and frame rested on elastic foundation using matrix displacement method. An exact stiffness matrix of a beam element on elastic foundation is formulated. The beam is rested on elastic Winkler foundation. At the end off paper, same results of frame on elastic foundation are presented.
APA, Harvard, Vancouver, ISO, and other styles
4

Bredács, Alice. "A pozitív pszichológia pedagógiai és művészetpedagógiai aspektusai és a pozitív irányzat mozgalommá válása az oktatásban." Iskolakultúra 27, no. 1-2 (September 18, 2018): 3–22. http://dx.doi.org/10.17543/iskkult.2018.1-2.3.

Full text
Abstract:
És érzed, milyen ragadós a szó?Rám is ragad. – Az Isten is megáld:Terjeszd el ezt a bűbájos ragályt,Ezt a gyermeki, drága, szent dacot:„Boldog vagyok”.Reményik Sándor: Boldog vagyok című versének részlete1933. október 12.
APA, Harvard, Vancouver, ISO, and other styles
5

Bradáč, Albert, Miroslav Ďatko, and Marek Semela. "Vliv neschváleného ochranného rámu na vozidle na zranění motocyklisty při dopravní nehodě." Soudní inženýrství 31, no. 2 (June 17, 2020): 14. http://dx.doi.org/10.13164/si.2020.2.14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Šimonová, Daniela. "Vacuum assisted therapy of complicated surgical wounds." Onkologie 10, no. 5 (November 1, 2016): 238–42. http://dx.doi.org/10.36290/xon.2016.051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bartošová, Michaela, and Lenka Slepičková. "Složené rodiny a perspektiva dětských aktérů: Nové tematické a metodologické přístupy ve výzkumu rodin po rozvodu." Sociální studia / Social Studies 6, no. 4 (August 5, 2009): 73–90. http://dx.doi.org/10.5817/soc2009-4-73.

Full text
Abstract:
Tento článek nabízí shrnutí toho, jak se náhled sociálních věd na rozvod a porozvodová uspořádání v posledních několika desetiletích proměňoval. Zároveň bychom rády upozornily na význam dítěte, nejen v procesu re-konstrukce rodin, ale i v obecnějším diskurzu nové sociologie dětství. Text lze rozdělit na dvě části: První část čtenáře seznamuje s demografickými daty indikujícími rozvodovost a existenci složených rodin v České republice. Věnuje se také způsobům, jakými tuto situaci reflektují čeští sociologové a jejich zahraniční kolegové. S cílem upozornit na roli dítěte v procesu utváření nových rodin se druhá část věnuje širším konceptuálním a metodologickým aspektům nového pojetí dětství v sociálních vědách. Aplikaci nového metodologického a tematického přístupu pak představujeme na několika výzkumech týkajících se tématu rozvodu.
APA, Harvard, Vancouver, ISO, and other styles
8

Košnarová, Veronika. "Voices outside the Frames: Růže, a Regional Publishing House in an Age of Tangible Irrationality." Soudobé dějiny 21, no. 3 (September 1, 2014): 315–39. http://dx.doi.org/10.51134/sod.2014.020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bandúrová, Veronika, Karel Smetana, Jan Plzák, and Barbora Dvořánková. "Microenvironment of squamous cell carcinoma of the head and neck as an analogy of a healing wound Czech version." Otorinolaryngologie a foniatrie 71, no. 1 (March 22, 2022): 18–23. http://dx.doi.org/10.48095/ccorl202218.

Full text
Abstract:
Numerous interactions occur among fibroblasts, keratinocytes and immune cells during wound healing. The release of cytokines supports formation of granular tissue which then fills the wound. A chronic wound appears when this complex process is disrupted. We can see this problem in patients with diabetes. Granular tissue is very similar to the stroma of solid tumors. This work is focused on parallels between a healing wound and tumor. It aims to clearly describe the regulation of both processes. New knowledge in this field can contribute to revealing new therapeutic possibilities in chronic wounds and solid tumors. Keywords: squamous cell carcinoma – Head and neck tumors – healing – tumor microenvironment
APA, Harvard, Vancouver, ISO, and other styles
10

Vân, Phạm Thị Hà Vân, Nguyễn Thị Hiếu Trang, and Phạm Quang Thắng. "Khảo sát ảnh hưởng của các họ củ nưa và nhiệt độ bảo quản đến hàm lượng glucomannan trồng tại một số tỉnh miền Nam và Tây Nguyên." Tạp chí Khoa học 14, no. 12 (September 20, 2019): 161. http://dx.doi.org/10.54607/hcmue.js.14.12.315(2017).

Full text
Abstract:
Đánh giá ảnh hưởng của các họ củ nưa đến hàm lượng glucomannan trồng tại một số tỉnh miền Nam và Tây Nguyên. Glucomannan trong mẫu củ nưa thuộc chi Amorphophallus, họ Ráy Araceae ở Vũng Tàu là 7,58 ± 0,56%; 9,94 ± 0,61%; Đắk Lắk là 7,17 ± 0,89%. Ở Trà Vinh, Bến Tre củ nưa thuộc chi Tacca, họ Râu hùm Taccaceae không chứa glucomannan. Củ nưa được lưu trữ ở các chế độ nhiệt độ khác nhau. Trong quá trình bảo quản hàm lượng glucomannan giảm dần, độ hao hụt khối lượng tăng dần theo thời gian.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Rámy"

1

Hajer, Václav. "Konstrukční uspořádání zadní části rámu vozidla Formule Student." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229851.

Full text
Abstract:
This diploma thesis deals with description of the design of the rear of the vehicle structure of Formula Student processed by using a 3D CAD system. Formula have to fulfill all requirements Formula Student rules. The requirements and rules are given by building of engine and other considered engine components. The final version of the design of the rear part is assembled with the supplied front and the computational model is created to simulate the torsional stiffness of the FEM system. Another analysis model is created for a foreign supplied frame construction. Both of these frames are in terms of torsional stiffness evaluated and mutually compared. There are also mentioned selected Formula Student rules and overview of the formula frames and their overview.
APA, Harvard, Vancouver, ISO, and other styles
2

Borýsek, Lukáš. "Manipulátor pro skládání slévárenských forem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402505.

Full text
Abstract:
The diploma thesis deals with the design of manipulator construction for folding two-part molds. In the thesis, an analysis of the current state of knowledge in the field of handling equipment and industrial robots is generally performed. Subsequently, the work introduces the current issue of handling equipment that is used in foundry. Furthermore, the work deals with the analysis of the manipulator construction, choosing the appropriate solution for the construction of its own handling equipment. Design solution is supported by computational message, 3D model and drawing documentation of selected nodes. The conclusion is devoted to the evaluation of work and practical recommendations.
APA, Harvard, Vancouver, ISO, and other styles
3

Knebl, Vladimír. "Vyhodnocení doplňkové výbavy karoserií vozidel z pohledu legislativy." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-232664.

Full text
Abstract:
This thesis discusses the possibilities of additional equipment on vehicle body. The content of the theoretical and practical part. The theoretical part is focused on clarifying the fundamental concepts, including the issue of legislative regulations and laws. The practical part deals with specific examples of changes in the body, which are then examined in terms of legislation and clarify their possible assembly and conditions of use.
APA, Harvard, Vancouver, ISO, and other styles
4

Šmak, Petr. "Návrh rámu HPV." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228229.

Full text
Abstract:
Design of frame of a human powered vehicle (HPV) is the aim of this diploma thesis. Wide analysis precedes design process. The thesis describes historical developement of land transportation, especially history of cycling, bicycles and other human povered vehicles, which are not so extended. Preferences and deficiencies of transportation by these ecological vehicles are shown. The thesis includes summary of most widespread and best-known conceptions, including their advantages and disadvanteges. Conception of three-wheeled vehicle was selected. It has two steered front wheels and one powered rear wheel. The accent is putted on wide efficiency, ergonomics, simplicity of vehicle`s frame and possibility of using common cycling components. 3D model of frame and assembly of vehicle was created. This model was checked by FEM computation.
APA, Harvard, Vancouver, ISO, and other styles
5

Gál, Petr. "Řešení rámu stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228836.

Full text
Abstract:
This thesis deals with the creation of optimalization data of rollway frame for transport handling units. Optimalization is performed on the basis of the size of load handling unit and the subsequent deflection of the profile. The solution is carried out analytically and the results are compared with FEM program outputs.
APA, Harvard, Vancouver, ISO, and other styles
6

Gayer, Tomáš. "Konstrukce rámu lehokola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228873.

Full text
Abstract:
The aim of this diploma thesis is evolution of the new model of tricycle. This thesis describes process of engineering from design of several parts and whole frame in CAD system Autodesk Inventor, to creating complete drawing documentation. Next part of this thesis is focused on basic static-structural analysis using finite element method in software ANSYS Workbench and determining boundary conditions for this analysis. The final part is about visualization of the new tricycle.
APA, Harvard, Vancouver, ISO, and other styles
7

Měřičková, Petra. "Svařování rámu výtahové kabiny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231112.

Full text
Abstract:
Stress relieving in the welded joints occurs when loaded of the platform lift. Critical welds of profile from steel S235JRH and of stiffener from steel S355J0 are examined in terms of flexibility, strength and safety using strength analysis method. Under different welding conditions and parameters are performed the testing welds by method MAG. Macroscopic and microscopic inspection are conducted as well as tension test. Weld created in active gas 82 %Ar + 18 %CO2, by dip transfer with low values of welding current 96 A and voltage 20,2 V became as the top evaluated sample. This weld is recommended to use in practice.
APA, Harvard, Vancouver, ISO, and other styles
8

Haman, Martin. "Design rámu horského kola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229015.

Full text
Abstract:
The aim of master thesis is the design of full suspension mountain bike frame for racing and competition use. The base of the design solution is selection optimal conception of suspension which influence external design of the frame. General benefit of this concept is utilizing specific properties of carbon composite for design of funkcional frame parts and their technical and visual integration. Important part of this work is design of frame details: rear ends, rear shox's link and duct of the bowdens, wires and brake hydraulic housing.
APA, Harvard, Vancouver, ISO, and other styles
9

Šurýn, Michal. "Svařování rámů dveří pekařských pecí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228633.

Full text
Abstract:
This thesis made in the frame of my engineer studies is focused on technologic process of welding the door-case of bakery ovens. The project will suggest and rate used based material and then the choice of filler material, methods, welding characteristics and welding procedure. At the conclusion of the thesis is brief economical analysis.
APA, Harvard, Vancouver, ISO, and other styles
10

Rašek, Ondřej. "Svařování rámu z hliníkových slitin." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231110.

Full text
Abstract:
For TIG welding of transformer fame is important enough weld root fusion, however exposed surfaces must remain unaffected. Three types of test were made to determine properties of welds under different conditions. Tests were macroscopic inspection, tensile test and fracture test. Next was economic evaluation of different methods. Best results were for single layer weld with pre-heated material.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Rámy"

1

Mikeš, Petr. Paměť rány. Havířov: Revue MUKL, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hořec, Jaromír. Rány z milosti. Praha: Mladá fronta, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Turčány, Viliam. Obrazy--čiže Mária i rám. Bratislava: Slovenský spisovatel̕, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wilson, Horace Hayman. Select Specimens of the Theatre of the Hindus: Translated from the original Sanscrit. Volume 2: Vikrama and Urvasí; Málatí and Mádhava; Uttara Ráma Cheritra. Adamant Media Corporation, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Rámy' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography