Relevant bibliographies by topics / (Re); Nusselt number

Contents

  1. Journal articles
  2. Book chapters
  3. Conference papers

Academic literature on the topic '(Re); Nusselt number'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '(Re); Nusselt number.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "(Re); Nusselt number"

1

Van den Bulck, E. "The Nonlinear Increase of Nusselt Number With Friction Factor in Fully Developed Laminar Duct Flow." Journal of Heat Transfer 126, no. 5 (2004): 840–42. http://dx.doi.org/10.1115/1.1800511.

Full text
Abstract:
This paper deals with heat transfer in fully developed laminar flow in cylindrical ducts. For this type of flow, the product of friction factor with Reynolds number f Re and the Nusselt number are both constants. It is known that the Nusselt number increases with the shift of boundary condition from constant wall temperature to constant heat flux. Also, the ratio of the Nusselt number to f Re increases when the convexity of the duct is reduced, e.g., a cylinder visavis parallel plates. This paper gives a simple physical explanation for these two phenomenona.
APA, Harvard, Vancouver, ISO, and other styles
2

Shaikh Sohel Mohd Khalil, Rai Sujit Nath Sahai, Nitin Parashram Gulhane, Khizar Ahmed Pathan, Ajaj Rashid Attar, and Sher Afghan Khan. "Experimental Investigation of Local Nusselt Profile Dissemination to Augment Heat Transfer under Air Jet Infringements for Industrial Applications." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 112, no. 2 (2024): 161–73. http://dx.doi.org/10.37934/arfmts.112.2.161173.

Full text
Abstract:
An experimental study is presented in this paper to evaluate the enhancement of heat transfer characteristics. This includes the study of a steady air jet impinging on a planar aluminum plate with constant heat flux. Extensive industrial applications of heat transfer include electronic heat sinks, the food industry, automobiles, and heat exchangers. The magnitude of the local Nusselt number along the streamwise direction is determined through detailed experimental computation using the infrared radiometry technique. The range of Reynolds number was selected between 6500 ≤ Re ≤ 15000 and the ai
APA, Harvard, Vancouver, ISO, and other styles
3

Su, Duan, He, Ma, and Xu. "Thermally Developing Flow and Heat Transfer in Elliptical Minichannels with Constant Wall Temperature." Micromachines 10, no. 10 (2019): 713. http://dx.doi.org/10.3390/mi10100713.

Full text
Abstract:
Laminar convective heat transfer of elliptical minichannels is investigated for hydrodynamically fully developed but thermal developing flow with no-slip condition. A three-dimensional numerical model is developed in different elliptical geometries with the aspect ratio varying from 0.2 to 1. The effect of Reynolds number (25 ≤ Re ≤ 2000) on the local Nusselt number is examined in detail. The results indicate that the local Nusselt number is a decreasing function of Reynolds number and it is sensitive to Reynolds number especially for Re less than 250. The effect of aspect ratio on local Nusse
APA, Harvard, Vancouver, ISO, and other styles
4

Tzeng, Sheng Chung. "Convective Heat Transfer in a Rectangular Channel Filled With Sintered Bronze Beads and Periodically Spaced Heated Blocks." Journal of Heat Transfer 128, no. 5 (2005): 453–64. http://dx.doi.org/10.1115/1.2175151.

Full text
Abstract:
This work numerically investigated the steady state fluid flow and heat transfer behaviors associated with a sintered porous channel that contains periodically spaced heated blocks. Some typical cases are experimentally examined in this study. The relevant varied parameters were the average bead diameter (d), the relative block height (h∕H), the relative block width (w∕H), the relative block spacing (s∕H), and the Reynolds number (Re). The numerical results revealed a lack of global recirculation in regions between the blocks, where the forced convective heat transfer was low, but the heat in
APA, Harvard, Vancouver, ISO, and other styles
5

Xiong, Ting, Chenchen Chen, Yong Chen, and Zhenlong Fang. "Numerical study of the momentum and heat transfer between an oblate ellipsoid and a gas in uniform flow." Journal of Physics: Conference Series 2569, no. 1 (2023): 012058. http://dx.doi.org/10.1088/1742-6596/2569/1/012058.

Full text
Abstract:
Abstract In this study, drag coefficient (cd ) and Nusselt number (Nu) for oblate ellipsoids with different incident angles (θ) and particle aspect ratios (Ar) in uniform flow have been computed over a wide range of Re ∈[10,500]. Finally, a new drag coefficient correlation is proposed, which covers a wider range of oblate ellipsoids. Surprisingly, we observe that the incident angle has a negligible effect on the Nusselt number for the oblate ellipsoids in the Reynolds number range studied. The Nusselt number for oblate ellipsoids with incident angle (θ) can be approximated accurately by the av
APA, Harvard, Vancouver, ISO, and other styles
6

Martin, Elena, Alejandro Valeije, Francisco Sastre, and Angel Velazquez. "Impact of Channels Aspect Ratio on the Heat Transfer in Finned Heat Sinks with Tip Clearance." Micromachines 13, no. 4 (2022): 599. http://dx.doi.org/10.3390/mi13040599.

Full text
Abstract:
A 3D numerical study is used to analyze the flow topology and performance, in terms of heat transfer efficiency and required pumping power, of heat sink devices with different channel aspect-ratio in the presence of tip-clearance. Seven different channel aspect ratios AR, from 0.25 to 1.75, were analyzed. The flow Reynolds numbers Re, based on the average velocity evaluated in the device channels region, were in the range of 200 to 1000. Two different behaviors of the global Nusselt were obtained depending on the flow Reynolds number: for Re<600, the heat transfer increased with the channel
APA, Harvard, Vancouver, ISO, and other styles
7

Taler, Dawid. "Semi-empirical heat transfer correlations for turbulent tube flow of liquid metals." International Journal of Numerical Methods for Heat & Fluid Flow 28, no. 1 (2018): 151–72. http://dx.doi.org/10.1108/hff-09-2017-0367.

Full text
Abstract:
Purpose The purpose of this paper is to develop new semi-empirical heat transfer correlations for turbulent flow of liquid metals in the tubes, and then to compare these correlations with the experimental data. The Prandtl and Reynolds numbers can vary in the ranges: 0.0001 ≤ Pr ≤ 0.1 and 3000 ≤ Re ≤ 106. Design/methodology/approach The energy conservation equation averaged by Reynolds was integrated using the universal velocity profile determined experimentally by Reichardt for the turbulent tube flow and four different models for the turbulent Prandtl number. Turbulent heat transfer in the c
APA, Harvard, Vancouver, ISO, and other styles
8

Alexandrova, Silvia, Maria Karsheva, Abdellah Saboni, and Christophe Gourdon. "Heat transfer from a moving fluid sphere with internal heat generation." Thermal Science 18, no. 4 (2014): 1213–22. http://dx.doi.org/10.2298/tsci120811054a.

Full text
Abstract:
In this work, we solve numerically the unsteady conduction-convection equation including heat generation inside a fluid sphere. The results of a numerical study in which the Nusselt numbers from a spherical fluid volume were computed for different ranges of Reynolds number (0<Re<100), Peclet number (0<Pe<10000) and viscosity ratio (0<k<10), are presented. For a circulating drop with Re?0, steady creeping flow is assumed around and inside the sphere. In this case, the average temperatures computed from our numerical analysis are compared with those from literature and a very g
APA, Harvard, Vancouver, ISO, and other styles
9

Al-Kouz, Wael, Rafat Al-Waked, Ma’en Sari, Wahib Owhaib, and Anas Atieh. "Numerical study of heat transfer enhancement in the entrance region for low-pressure gaseous laminar pipe flows using Al2O3–air nanofluid." Advances in Mechanical Engineering 10, no. 7 (2018): 168781401878441. http://dx.doi.org/10.1177/1687814018784410.

Full text
Abstract:
The gaseous low-pressure nanofluid flow of a steady-state two-dimensional laminar forced convection heat transfer in the entrance region of pipes is numerically investigated. Such flows are of interest for many engineering applications like the nuclear reactor and electronic equipment cooling, heat exchangers, and many others. Physical parameters considered in this study are Reynolds number ( Re), Prandtl number ( Pr), nanosolid particles volume fraction [Formula: see text], Knudsen number ( Kn), and the aspect ratio ( AR). These parameters ranges are as follows: [Formula: see text], [Formula:
APA, Harvard, Vancouver, ISO, and other styles
10

Thani, Mohammed, and Muneer Ismael. "Numerical Study of Jet Impingement on Heated Sink Covered by a Porous Layer." Basrah journal for engineering science 22, no. 2 (2022): 1–9. http://dx.doi.org/10.33971/bjes.22.2.1.

Full text
Abstract:
This numerical study aims to enhance the heat transfer efficiency by dissipating the heat Emitted from electronic processors. A jet impingement technique is utilized with porous layer covering a metal fin as a heat sink. Forced convection and normal convection (due to the buoyancy effect) are taken into consideration. The two equations model (Local Thermal Non-Equilibrium LTNE) employed to describe the energy equations of the two phases of the porous surface. Finite Element Method (FEM) used to discretize these equations to obtain the numerical solution. To make this study closest to the reali
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "(Re); Nusselt number"

1

Verma, Tanishq, Utkarsh Sharma, Vaibhav Kumar, Sumeet Padhi, and Akhilesh Arora. "Improvement in Heat Transfer in Microchannel Using Recharging." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220775.

Full text
Abstract:
The use of microchannel has increased in various fields such as microelectronic chips, which are cooled using a heat exchanger and other different purposes. The project is impacting on Nusselt’s estimated value by introducing a new charge through the second charging station and the flow of the main channel to increase the heat transfer rate in the integrated wall by performing mathematical simulations. First, the performance of the recharge concept is assessed by studying the representation of the 2-D model (i.e., the flow between the two plates) and then comparisons are made between the simpl
APA, Harvard, Vancouver, ISO, and other styles
2

Kepekçi, Haydar. "CFD Analysis of the Influence of Twisted Tape Width and Thickness on Flow Characteristics in Pipe Flow." In Doğanın Ritmi, Enerjinin Dönüşümü, Üretimin Gücü (I. Ulusal Enerji Dönüşümü ve Sürdürülebilirlik Konferansı). İstanbul Gedik Üniversitesi, 2025. https://doi.org/10.61150/gedikyay.250305.

Full text
Abstract:
This study investigates the impact of twisted tape geometry on heat transfer performance in pipe flow, focusing on width ratio, thickness, and flow velocity variations. A 25 mm diameter and 1-meter-long pipe were utilized, with water as the working fluid. The analyses considered flow velocities of 0.05 m/s and 0.2 m/s, twisted tape width ratios (20%, 40%, 80%), and thicknesses (0.5 mm, 1 mm, 2 mm). Key parameters such as Reynolds number (Re), Nusselt number (Nu), friction factor (f), and pressure drop (ΔP) were calculated. The results revealed that increasing the width ratio and thickness of t
APA, Harvard, Vancouver, ISO, and other styles
3

Masuda, Hayato, and Naoto Ohmura. "Thermal Effect on Taylor-Couette Flow Dynamics." In Vortex Dynamics - Theoretical, Experimental and Numerical Approaches [Working Title]. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.1006353.

Full text
Abstract:
In this chapter, we experimentally and numerically reviewed Taylor-Couette flow dynamics with an axial temperature distribution. In experiments, the glycerol aqueous solution with various concentrations was used. Flow pattern observation and temperature measurement were performed. Based on the results, we classified the flow pattern into six cases as a function of Reynolds and Grashof numbers. In the specified case (denoted as Case II in this chapter), the Taylor vortex flow and heat convection alternatively appeared. In this condition, when switching from the Taylor vortex flow to heat convec
APA, Harvard, Vancouver, ISO, and other styles
4

Admi, Youssef, Tariq Khair, Jaouad Benhamou, Mohammed Amine Moussaoui, and Ahmed Mezrhab. "Effect of Dual Partitions on Heat Transfer and Fluid Flow Characteristics Around a Square Cylinder Using MRT-Lattice Boltzmann Method." In Advances in Environmental Engineering and Green Technologies. IGI Global, 2025. https://doi.org/10.4018/979-8-3693-9924-8.ch019.

Full text
Abstract:
In this research, a numerical study of airflow control coupled to heat transfer around a heated square cylinder is carried out at a fixed Reynolds number Re= 150. The effect of the position and length of two partitions implemented downstream of the square obstacle is examined. The numerical simulations are performed using the lattice Boltzmann method with multiple relaxation times. The results obtained are presented in the form of graphs of the isotherms, the temporal and mean drag coefficients and as a function of the mean Nusselt number. These results show that the successive inclusion of co
APA, Harvard, Vancouver, ISO, and other styles
5

Boudraa, Bouziane, and Rachid Bessaïh. "Numerical Investigation of Turbulent Slot Jets with Various Nanoparticles Shapes." In Mechanical Engineering Technologies and Applications: Volume 2. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815124125123020003.

Full text
Abstract:
In this work, a numerical investigation related to the turbulent forced convection of a water-Al2O3 nanofluid in slot jets impinging on multiple hot components fixed on the lower wall, using different nanoparticle shapes (spherical, blades, bricks, cylindrical and platelets), was carried out. The standard k-ε turbulence model with wall enhanced treatment and two-phase mixture model were used to analyze the fluid flow and heat transfer. The outcomes revealed that the increase in the Reynolds number (Re) and volume fraction of nanoparticles (φ) with all nanoparticle shapes enhanced the heat tran
APA, Harvard, Vancouver, ISO, and other styles
6

Abdulrahman Alpha, Ndah, and Aondoyila Kuhe. "Heat Transfer Enhancement on Staggered Perforated Circular Pin-Fin Heat Sink: An Experimental Assessment." In Current Research in Thermal Conductivity [Working Title]. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.1007019.

Full text
Abstract:
This experimental study examines how forced convective flow affects heat transfer properties in a rectangular channel with staggered pin fins featuring different perforation patterns under constant heat flux conditions across Reynolds numbers (Re) ranging from 2.0 × 103 to 12 × 103. The study compares cylindrical pin fins with solid pin fins and those featuring circular longitudinal (L), longitudinal/transverse (LT), and longitudinal/transverse/vertical (LTV) perforations to determine optimal perforation configurations for enhanced heat transfer performance. The experiment uses a Peltier modul
APA, Harvard, Vancouver, ISO, and other styles
7

"Modelling of heat transfer in helically coiled tube." In Book of Abstracts - RAD 2025 Conference. RAD Centre, Niš, Serbia, 2025. https://doi.org/10.21175/rad.abstr.book.2025.45.1.

Full text
Abstract:
This study presents a numerical modelling analysis of heat transfer in a helically coiled tube at the conditions of the experiment. The investigations were performed for a turbulent flow regime in the hydrodynamically and thermally stabilized region at 50 < x/d < 100 (x – heated tube length, d - tube inside diameter). The air through the unheated hydrodynamic stabilization section (x/d ≈ 150) entered the heated thermal section (x/d = 100). The geometric parameters of the stainless-steel coil: coil diameter D = 0.39 m, tube diameter d = 0.017 m (D/d=23), tube wall thickness = 0.0005 m, an
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "(Re); Nusselt number"

1

Ghenai, Chaouki. "Average Nusselt Number for Pressure and Suction Sides of Squealer Turbine Blade Tip." In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44350.

Full text
Abstract:
Numerical simulations of the flow field and heat transfer of squealer blade tip are performed in this study. The effect of Reynolds number (Re = 10000–40000), the clearance gap to width ratios (C/W = 5%–15%) and the cavity depth to width ratios (D/W = 10%, 20% and 50%) on fluid flow and heat transfer characteristics are obtained. The temperature and velocity distributions inside the cavity, the local heat transfer coefficients, and the average Nusselt numbers for the pressure and suction sides of the turbine blade tip are determined. This paper presents the results of the effects of Reynolds n
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Peter, and Kamran Mohseni. "Scaling of Nusselt Number for Digitized Heat Transfer at All Axial Distances." In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ht2013-17572.

Full text
Abstract:
The heat generation rates of modern electronic systems have increased to a point where conventional forms of thermal management are no longer sufficient. In this paper, Digitized Heat Transfer (DHT) is examined as one of the proposed solutions for high heat flux thermal management. Nusselt number is used to quantify the heat transfer capabilities of the flow while Re, Pr, x/H, and droplet aspect ratio are identified as the relevant nondimensional parameters that influence the shape and magnitude of Nu throughout a heated channel. With the intention of providing a single curve to represent the
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Fan, Cunliang Liu, Tianliang Zhou, Haonan Yan, and Guodong Li. "Study on Segment Fitting Method of Nusselt Number on the Turbine Vane." In ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/gt2024-122859.

Full text
Abstract:
Abstract This study analyzes the distribution characteristics of the Nusselt number (NuC) on the turbine vane. Subsequently, the study proposes an original Nu segment fitting method applicable to the whole surface on the turbine vane. The flow near the leading edge can be approximated as flow around a semi-cylinder. The Nud in this region can be fitted using a power function of Red (the characteristic length is the diameter of the inner tangent circle of the leading edge) with phase correction. Due to transition is completed faster on the suction surface, Nu in the transition region is linearl
APA, Harvard, Vancouver, ISO, and other styles
4

Prasher, Ravi S., John Dirner, Je-Young Chang, et al. "Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micro-Pin-Fins Under Cross Flow for Water as Fluid." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13140.

Full text
Abstract:
Experimental results of the thermal and hydraulic performances of silicon-based, low aspect ratio micro-pin-fin cold plates under cross flow conditions are reported. The pins were both circular and square in shape with dimensions (diameter for circular and sides for square) ranging from 50 to 150 μm. The test chip contained 20 integral 75×75 μm temperature sensors which were used to determine the thermal resistance (K W-1) of the cold plates. The experiments were conducted using water, over a Reynolds number (Re) ranging from 40 to 1000. The data show that the average Nusselt number (Nu) based
APA, Harvard, Vancouver, ISO, and other styles
5

Mishra, D. P., and D. Mishra. "Enhancement of Heat Transfer to an Air Jet Impinging on a Flat Plate." In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56155.

Full text
Abstract:
An experimental investigation of the impinging jet cooling from a heated flat plate has been carried out for several Reynolds numbers (Re) and nozzle to plate distances. The present results indicate that the maximum heat transfer occurs from the heated plate at stagnation point and decreases with radial distances for all cases. The maximum value of the stagnation as well as average Nusselt number is found to occur at separation distance, H/D = 6.0 for Re = 55000. An attempt is also made to study effects of nozzle exit configuration on the heat transfer using a sharp edged orifice for same set
APA, Harvard, Vancouver, ISO, and other styles
6

Prajapati, Anjana N., and Andallib Tariq. "A Comparative Study of Heat Transfer Characteristics and Pressure Drop in Matrix Structures." In ASME 2019 Gas Turbine India Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gtindia2019-2550.

Full text
Abstract:
Abstract An experimental study on local heat transfer distributions and pressure loss in the closed matrix channels with an angle 45° has been conducted using liquid crystal thermography for a Reynolds number (Re) range 5800–14000. A total of five different configurations of matrixes have been considered for investigation. The thermo-hydraulic performance of the matrix structure with angle 45° is initially compared with that of the matrixes with angles 35° and 55° for a constant sub-channel aspect ratio (ARs) 0.8. Later, the sub-channel aspect ratio of matrix with angle 45° has been varied as
APA, Harvard, Vancouver, ISO, and other styles
7

Su, Bo, Wei-jiang Xu, Zhi-ping Li, Tian-liang Zhou, and Fei Lu. "Study of Heat Transfer Characteristics of a Single Jet Impinging on a Conical Surface." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-14705.

Full text
Abstract:
Abstract In this paper, the heat transfer performance of single jet impinging conical surface is investigated based on transient liquid crystal experiments. Because of different target surface structures, impingement heat transfer will have different heat transfer characteristics. In order to better understand the heat transfer mechanism of the impinging conical target surface, this paper studies the three jet Reynolds number (Re) ranged from 25000 to 70000, three the dimensionless nozzle-to-surface distance (H/D) from 0.75 to 6 on heat transfer characteristics. The liquid crystal thermal imag
APA, Harvard, Vancouver, ISO, and other styles
8

Abdul HadiHamzah, Zuhal, and Huda Abdullah Al-Mayahi. "Mixed Convection Numerical Study Within Lid-Driven Cavity Heat Transferring with Variable Prandtl Number." In X INTERNATIONAL CONGRESS OF PURE AND APPLIED TECHNOLOGICAL SCIENCES. Rimar Academy, 2023. http://dx.doi.org/10.47832/minarcongress10-8.

Full text
Abstract:
Heat transfer mixed convection for laminar fluid flow within a vented rectangular cavity is numerically studied. The enclosure's upper wall heated to a consistent temperature while the bottom wall is maintained at a steady speed while it remains cold. An opening in the upper left wall of the cavity allows an external flow to enter, and one in the lower left vertical wall of the cavity allows an external flow to exit. The finite element method is used in conjunction with the Flex PDE software package to solve the conservation governing equations for continuity, energy, and momentum. Results fro
APA, Harvard, Vancouver, ISO, and other styles
9

Gudi, Abhay, and Vijaykumar Hindasageri. "Numerical Simulation of Impinging Slot Air Jet in the Presence of a Cross Flow." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-69088.

Full text
Abstract:
Abstract A numerical investigation is carried out to study the effect of cross flow on local heat transfer distribution of a flat surface impinged normally by a slot air jet using ANSYS Fluent commercial software. Initially an experimental validation study is conducted to validate the centerline Nusselt number and to fix numerical settings such as Turbulence model, optimal mesh size and solution strategy. During this study, it is observed that the k-ϵ realizable model predicts fairly accurate results (less than 10%) when compared with the experiment data and therefore used for all further simu
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, L. K., M. C. Wu, C. J. Fang, and Y. H. Hung. "Convective Heat Transfer From Heated Extended Surfaces With a Confined Slot Jet Impingement." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-61442.

Full text
Abstract:
A series of experimental investigations with stringent measurement methods on the studies related to mixed convection from the horizontally confined extended surfaces with a slot jet impingement have been successfully conducted. The relevant parameters influencing mixed convection performance due to jet impingement and buoyancy include the Grashof number, ratio of jet separation distance to nozzle width, ratio of extended surfaces height to nozzle width and jet Reynolds number. The range of these parameters studied are Grs = 3.77 × 105 – 1.84 × 106, H/W = 1–10, Hs/W = 0.74–3.40 and Re = 63–138
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic '(Re); Nusselt number' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography