To see the other types of publications on this topic, follow the link: Rectangular Microstrip Patch Antenna.

Dissertations / Theses on the topic 'Rectangular Microstrip Patch Antenna'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Rectangular Microstrip Patch Antenna.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Lanka, Subrahmanya Vivekananda. "Pattern Analysis of “The Rectangular Microstrip Patch Antenna”." Thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-19564.

Full text
Abstract:
In the recent years the development in communication systems requires the development of low cost, minimal weight, low profile antennas that are capable of maintaining high performance over a wide spectrum of frequencies. This technological trend has focused much effort into the design of a Microstrip patch antenna. In this work, the patter of two designs of a Microstrip patch antenna have been analyzed and studied.Design1 (LxWxH: 23mm x 30mm x 1.5mm) with a dielectric constant of 9.8(alumina) at 2.1GHz and Design2 (LxWxH: 47mm x 31mm x 1.59mm) with a dielectric constant 2.32 at 2.1GHz.These t
APA, Harvard, Vancouver, ISO, and other styles
2

Janečka, Martin. "Vícevrstvá Yagiho anténa pro pásmo 60 GHz." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220264.

Full text
Abstract:
This diploma thesis deals with the design and simulation of multi-layer stacked Yagi antenna at the frequency of 60 GHz. At work are proposed and compared two ways of antenna feeding methods. Based on the results obtained, antenna is fed by substrate integrated waveguide. The proposed antenna has been optimized in terms of gain and impedance matching at the specified frequency. The correct functionality of the antenna was verified by simulation program CST MWS 2011. Simulation results were verified experimentally.
APA, Harvard, Vancouver, ISO, and other styles
3

Okuducu, Yusuf. "Dual Band Microstrip Patch Antenna Structures." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/2/12606859/index.pdf.

Full text
Abstract:
Wideband and dual band stacked microstrip patch antennas are investigated for the new wideband and dual band applications in the area of telecommunications. In this thesis, aperture-coupled stacked patch antennas are used to increase the bandwidth of the microstrip patch antenna. By this technique, antennas with 51% bandwidth at 6.1 GHz and 43% bandwidth at 8 GHz satisfying S11&lt<br>-15 dB are designed, manufactured and measured. A dual-band aperture coupled stacked microstrip patch antenna operating at 1.8 GHz with 3.8% bandwidth and at 2.4 GHz with 1.6% bandwidth is designed, produced and m
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, Christopher Brian. "Wideband dual-linear polarized microstrip patch antenna." [College Station, Tex. : Texas A&M University, 2008. http://hdl.handle.net/1969.1/ETD-TAMU-3162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Belentepe, Bilge. "Electromagnetically coupled microstrip patch antenna array design." Thesis, University of Surrey, 1993. http://epubs.surrey.ac.uk/842825/.

Full text
Abstract:
This work is an effort to investigate and derive a simple equivalent circuit model to represent an electromagnetically coupled microstrip patch antenna. This provides a simple approach to the complicated electromagnetic coupling behaviour in the patch. A simplified theory based on the broadside coupled line and improved transmission line theories is developed to derive the equivalent circuit of EM coupled patch antenna. The design parameters are determined from the above mentioned theory. Computer programs are developed to provide a practical design of such antennas without involving complicat
APA, Harvard, Vancouver, ISO, and other styles
6

Krier, Peter. "Microstrip patch antennas on gallium arsenide substrates." Thesis, University of Leeds, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.256366.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Khan, Raja Sheharyar, and Muhammad Ishfaq. "A Compact Microstrip Patch Antenna for LTE Applications." Thesis, Linnéuniversitetet, Institutionen för fysik och elektroteknik (IFE), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-24505.

Full text
Abstract:
A compact multiband antennas for Long Term Evolution (LTE) applications is a challenge. Both the frequencies of new wireless technologies and new frequency bands must be covered. The lower end of the 0.7- 3.5 GHz band is especially difficult to handle for miniaturized terminal devices. A single layer, line-feed rectangular microstrip patch antenna is small enough for the LTE handsets. Our project proposes size reduction and bandwidth enhancement through adapted feeding techniques. By means of slits the return loss and gain can be optimized with the aid of HFSS (High Frequency Structure Simulat
APA, Harvard, Vancouver, ISO, and other styles
8

Fatthi, Alsager Ahmed. "Design and Analysis of Microstrip Patch Antenna Arrays." Thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20461.

Full text
Abstract:
The performance and advantages of microstrip patch antennas such as lowweight, low profile, and low cost made them the perfect choice forcommunication systems engineers. They have the capability to integrate withmicrowave circuits and therefore they are very well suited for applications suchas cell devices, WLAN applications, navigation systems and many othersIn this thesis; a compact rectangular patch antennas are designed and tested forGPS devices at 1.57542 GHz, and for a satellite TV signal at 11.843 GHz and11.919 GHz. The final part of this work has been concentrated on studying anarray a
APA, Harvard, Vancouver, ISO, and other styles
9

Erel, Mahmut. "Design of microstrip patch antenna for the NPSAT1." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2002. http://library.nps.navy.mil/uhtbin/hyperion-image/02Dec%5FErel.pdf.

Full text
Abstract:
Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, December 2002.<br>Thesis advisor(s): Jovan E. Lebaric, Richard W. Adler. Includes bibliographical references (p. 61). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
10

Lai, Hau Wah. "Wideband meandering probe-fed patch antenna /." access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b19887383a.pdf.

Full text
Abstract:
Thesis (Ph. D.)--City University of Hong Kong, 2005.<br>"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy." Includes bibliographical references (leaves 144-153).
APA, Harvard, Vancouver, ISO, and other styles
11

PARTHASARATHY, KRISHNAN V. "MUTUAL COUPLING IN PATCH ANTENNA ARRAYS." University of Cincinnati / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1148325728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Jacmenovic, Dennis, and dennis_jacman@yahoo com au. "Optimisation of Active Microstrip Patch Antennas." RMIT University. Electrical and Computer Engineering, 2004. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20060307.144507.

Full text
Abstract:
This thesis presents a study of impedance optimisation of active microstrip patch antennas to multiple frequency points. A single layered aperture coupled microstrip patch antenna has been optimised to match the source reflection coefficient of a transistor in designing an active antenna. The active aperture coupled microstrip patch antenna was optimised to satisfy Global Positioning System (GPS) frequency specifications. A rudimentary aperture coupled microstrip patch antenna consists of a rectangular antenna element etched on the top surface of two dielectric substrates. The substrates
APA, Harvard, Vancouver, ISO, and other styles
13

Tasoglu, Ali Ozgur. "Analysis And Design Of Cylindrically Conformal Microstrip Antennas." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613441/index.pdf.

Full text
Abstract:
Cylindrically conformal microstrip antennas are investigated. Two different structures, namely proximity coupled and E-shaped microstrip antennas are analyzed and information about the design parameters is obtained by means of parametric study. With these structures, cylindrical arrays, having omnidirectional radiation in the circumferential plane of the cylinder, are designed. Proximity coupled cylindrical arrays operate in the 2.3-2.4 GHz aeronautical telemetry band with approximately 4% bandwidth. On the other hand, more than 30% bandwidth is obtained by E-Shaped cylindrical array antenna s
APA, Harvard, Vancouver, ISO, and other styles
14

Maki, Pamela Ruth. "A dual circularly polarized single element microstrip patch antenna." Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/49818.

Full text
Abstract:
Thesis (MScEng)--University of Stellenbosch, 2004.<br>ENGLISH ABSTRACT: This thesis discusses the design of a dual circularly polarized single element antenna with special emphasis on achieving a wide bandwidth and high polarization isolation. The aim of the study is to produce an antenna for transmission of colour video signals between a ground station and a low earth orbit satellite. Microstrip patch antennas are suitable for satellite applications because they are light weight, conformal and have a thin profile. However, the antennas' inherent naITOW bandwidth is one of their major d
APA, Harvard, Vancouver, ISO, and other styles
15

Hategekimana, Bayezi. "A Wideband Stacked Microstrip Patch Antenna for Telemetry Applications." International Foundation for Telemetering, 2010. http://hdl.handle.net/10150/604303.

Full text
Abstract:
ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California<br>This research article reports a design of a wide band multilayer microstrip patch antenna (MSPA). Positions of a coaxial probe feed to main patch of the multilayer MSPA, widths and lengths of main and parasitic patches, and height of a Rohacell foam layer in the multilayer MSPA were optimized to achieve desired performance in L-band. The work also reports a design of a two-by-two
APA, Harvard, Vancouver, ISO, and other styles
16

Yildirim, Meltem. "Design Of Dual Polarized Wideband Microstrip Antennas." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612023/index.pdf.

Full text
Abstract:
In this thesis, a wideband dual polarized microstrip antenna is designed, manufactured and measured. Slot coupled patch antenna structure is considered in order to achieve the wideband characteristic. Although rectangular shaped slot coupled patch antennas are widely used in most of the applications, their utilization in dual polarized antenna structures is not feasible due to space limitations regarding the positioning of two separate coupling slots for each polarization. For a rectangular slot, the parameter that affects the amount of coupling is the slot length. On the other hand when a H-s
APA, Harvard, Vancouver, ISO, and other styles
17

Luther, Justin. "Microstrip Patch Electrically Steerable Parasitic Array Radiators." Doctoral diss., University of Central Florida, 2013. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5984.

Full text
Abstract:
This dissertation explores the expansion of the Electrically Steerable Parasitic Array Radiator (ESPAR) technology to arrays using microstrip patch elements. Scanning arrays of two and three closely-coupled rectangular patch elements are presented, which incorporate no phase shifters. These arrays achieve directive radiation patterns and scanning of up to 26&deg; with maintained impedance match. The scanning is effected by tunable reactive loads which are used to control the mutual coupling between the elements, as well as additional loads which compensate to maintain the appropriate resonant
APA, Harvard, Vancouver, ISO, and other styles
18

Khan, Jahanzeb. "Design of Microstrip Patch Antenna on Liquid Crystal Polymer (LCP) for Applications at 70GHz." Thesis, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-807.

Full text
Abstract:
<p>The demand of small size electronic systems has been increasing for several decades. The physical size of systems is reduced due to advancements in integrated circuits. With reduction in size of electronic systems, there is also an increasing demand of small and low cost antennas. Patch antennas are one of the most attractive antennas for integrated RF front end systems due to their compatibility with microwave integrated circuits. To fulfil the demand of integrated RF front end systems, a design of microstrip patch antenna with optimum performance at 70GHz is investigated. The procedure co
APA, Harvard, Vancouver, ISO, and other styles
19

Ali, Abdulbaset M. M. "Gain enhancement of microstrip patch antenna using dielectric DNG superstrate /." Online version of thesis, 2009. http://hdl.handle.net/1850/11170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Acimovic, Igor. "Improving port isolation in dual-polarized microstrip patch antenna arrays." Thesis, University of Ottawa (Canada), 2006. http://hdl.handle.net/10393/27323.

Full text
Abstract:
In this thesis we present the design techniques mitigating the port isolation degradation in dual-polarized microstrip arrays. The advantages of using dual-polarized antennas are the frequency band reuse and simultaneous receive/transmit capability. To fully exploit these advantages the isolation between orthogonally polarized ports must be maximized and radiation cross-polarization minimized. To prevent the port isolation degradation due to presence of the feed network lines surrounding the radiator the "folded" feed optimized to maximize the port isolation is introduced. The analysis of the
APA, Harvard, Vancouver, ISO, and other styles
21

Ng, Ming Wah. "TLM modelling of microstrip patch antenna on magnetized ferrite substrate." Thesis, University of London, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.405515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Chiu, Chi Yuk. "Impedance bandwidth broadening techniques for small patch antennas /." access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b19887796a.pdf.

Full text
Abstract:
Thesis (Ph.D.)--City University of Hong Kong, 2005.<br>"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy" Includes bibliographical references (leaves 152-162)
APA, Harvard, Vancouver, ISO, and other styles
23

Elmezughi, Abdurrezagh, and s3089087@student rmit edu au. "Investigation of Methods for Integrating Broadband Microstrip Patch Antennas." RMIT University. Electrical and Computer Engineering, 2009. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20090305.093332.

Full text
Abstract:
The use of the microstrip antenna has grown rapidly for the last two decades, because of the increasing demand for a low profile antenna with small size, low cost, and high performance over a large spectrum of frequencies. However, despite the advantages microstrip antennas provide, a number of technical challenges remain to be solved for microstrip antennas to reach their full potential, particularly if they are to be interfaced with monolithic circuits. The objective of this thesis is to examine novel methods for integrating and constructing broadband microstrip antennas, particularly
APA, Harvard, Vancouver, ISO, and other styles
24

Akgun, Erdem. "Millimeter Wave Microstrip Launchers And Antenna Arrays." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12607863/index.pdf.

Full text
Abstract:
Coaxial-to-microstrip launcher and microstrip patch array antenna are designed to work at center frequency of 36.85 GHz with a bandwidth higher than 300 MHz. The antenna array design also includes the feeding network distributing the power to each antenna element. The design parameters are defined on this report and optimized by using an Electromagnetic Simulation software program. In order to verify the theoretical results, microstrip patch array antenna is produced as a prototype. Measurements of antenna parameters, electromagnetic field and circuit properties are interpreted to show complia
APA, Harvard, Vancouver, ISO, and other styles
25

Almutawa, Ahmad Tariq. "Log-Periodic Microstrip Patch Antenna Miniaturization Using Artificial Magnetic Conductor Surfaces." Scholar Commons, 2011. http://scholarcommons.usf.edu/etd/2982.

Full text
Abstract:
Microstrip patch antennas are attractive for numerous military and commercial applications due to their advantages in terms of low-profile, broadside radiation, low-cost, low-weight and conformability. However, the inherent narrowband performance of patch antennas prohibits their use in systems that demand wideband radiation. To alleviate the issue, an existing approach is to combine multiple patch antennas within a log-periodic array configuration. These log-periodic patch antennas (LPMAs) are capable of providing large bandwidths (>50%) with stable broadside radiation patterns. However, they
APA, Harvard, Vancouver, ISO, and other styles
26

Gupta, Sanjeev. "Tracking antenna architectures based on an integrated mixer microstrip patch array." Thesis, Queen's University Belfast, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.247349.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Revankar, U. K. "Three-Layer Electromagnetically Coupled Circular Microstrip Antennas." Thesis, Indian Institute of Science, 1995. https://etd.iisc.ac.in/handle/2005/241.

Full text
Abstract:
Presented in this thesis are the following experimental and theoretical investigations carried out on the three-layer electromagnetically coupled (EMC) circular microstrip antennas and their arrays. 1.Three-Layer EMC Circular Microstrip Antenna A three-layer EMC circular microstrip antenna consists of a probe-fed circular microstrip patch having two parasitically excited circular microstrip patches (without ground planes) stacked above it, with air gaps in between successive substrates. In the "inverted" configuration, the parasitic patches are on the lower (nearer to the driven substrat
APA, Harvard, Vancouver, ISO, and other styles
28

Revankar, U. K. "Three-Layer Electromagnetically Coupled Circular Microstrip Antennas." Thesis, Indian Institute of Science, 1995. http://hdl.handle.net/2005/241.

Full text
Abstract:
Presented in this thesis are the following experimental and theoretical investigations carried out on the three-layer electromagnetically coupled (EMC) circular microstrip antennas and their arrays. 1.Three-Layer EMC Circular Microstrip Antenna A three-layer EMC circular microstrip antenna consists of a probe-fed circular microstrip patch having two parasitically excited circular microstrip patches (without ground planes) stacked above it, with air gaps in between successive substrates. In the "inverted" configuration, the parasitic patches are on the lower (nearer to the driven substrate) s
APA, Harvard, Vancouver, ISO, and other styles
29

Li, Pei. "Novel wideband dual-frequency L-probe fed patch antenna and array /." access abstract and table of contents access full-text, 2006. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b21471447a.pdf.

Full text
Abstract:
Thesis (Ph.D.)--City University of Hong Kong, 2006.<br>"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy" Includes bibliographical references (leaves 179-189)
APA, Harvard, Vancouver, ISO, and other styles
30

Jackson, Ronald Edward Ramadoss Ramesh. "MEMS based tunable microstrip patch antenna fabricated using printed circuit processing techniques." Auburn, Ala., 2006. http://repo.lib.auburn.edu/2006%20Summer/Theses/JACKSON_RONALD_51.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Yee, Steven C. (Steven Christopher) 1989. "A frequency reconfigurable circularly polarized microstrip patch antenna using liquid metal microswitches." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/82359.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2013.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 78-80).<br>Reconfigurable antennas with adaptable frequency, pattern, and polarization offer flexibility and size reduction for wireless systems that must increasingly execute multiple missions with less volume. These antennas will also complement anticipated cognitive radio systems, which promise more efficient use of the electromagnetic spectrum. Microscale liquid metal switches are proposed to ov
APA, Harvard, Vancouver, ISO, and other styles
32

Sener, Goker. "Analysis And Design Of Microstrip Patch Antennas With Arbitrary Slot Shapes." Phd thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613161/index.pdf.

Full text
Abstract:
A new method is proposed that provides simple and effcient design and analysis algorithm for microstrip antennas with arbitrary patch shapes. The proposed procedure uses the mutiport network model (MNM) where the antenna is considered as a cavity bounded by perfect electric conductors on the top and the bottom surfaces and perfect magnetic conductor on the side surfaces. Ports are defined along the periphery of the patch, and the impedance matrix representing the voltage induced at one port due to a current source at another port, is obtained through the use of the 2-D Green&rsquo<br>s functio
APA, Harvard, Vancouver, ISO, and other styles
33

Kawser, Mohammad Tawhid. "Investigation of a Novel Dual Band Microstrip/Waveguide Hybrid Antenna Element." Thesis, Virginia Tech, 2005. http://hdl.handle.net/10919/33660.

Full text
Abstract:
Microstrip antennas are low in profile, light in weight, conformable in structure and are now developed for many applications. The main difficulty of the microstrip antenna is its narrow bandwidth. Several modern applications like satellite communications, remote sensing and multi-function radar systems will find it useful if there is dual band antenna operating from a single aperture. Some applications require covering both transmitting and receiving frequency bands which are spaced apart. Providing multiple antennas to handle multiple frequencies and polarizations becomes especially difficul
APA, Harvard, Vancouver, ISO, and other styles
34

Wu, Doris I., and James Rieger. "COMPUTER-AIDED DESIGN OF CIRCULARLY-POLARIZED CONFORMAL MICROSTRIP PATCH ANTENNA FOR TELEMETRY APPLICATIONS." International Foundation for Telemetering, 1994. http://hdl.handle.net/10150/608569.

Full text
Abstract:
International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California<br>Planar microstrip antennas are desirable in many telemetry applications because they are small in size, light in weight, and conformal to most surfaces. The design and optimization of circularly-polarized omnidirectional microstrip arrays using a new software simulation tool are discussed in this paper. Critical design issues such as the optimization of each array element for circular polarization and the minimization of mutual couplings as well as
APA, Harvard, Vancouver, ISO, and other styles
35

Akhtar, Asim, Hassan Mateen Alahi, and Moeed Sehnan. "Simulation of Phased Arrays with Rectangular Microstrip Patches on Photonic Crystal Substrates." Thesis, Linnéuniversitetet, Institutionen för datavetenskap, fysik och matematik, DFM, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-22144.

Full text
Abstract:
This thesis describes the investigation of photonic crystals as a substrate in microstrip phased array antennas. Alumina with a relative dielectric constant of 9.6 is used as substrate to obtain miniaturization of the components in the high-frequency range. The proposed design consists of four rectangular patches in a linear array conguration operating at 12 GHz. The antenna elements are excited by a microstrip feed line using the inset feeding technique for perfect impedance matching. A beam steering of 20o is achieved using a switched line phase shifter. Antenna parameters, including impedan
APA, Harvard, Vancouver, ISO, and other styles
36

Staffan, Paul. "Design of an ultra-wideband microstrip antenna array with low size, weight and power." Wright State University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=wright1578437280799995.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Khattak, Muhammad Kamran, Osama Siddique, and Waqar Ahmed. "Design and Simulation of Microstrip Phase Array Antenna using ADS." Thesis, Linnéuniversitetet, Institutionen för datavetenskap, fysik och matematik, DFM, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-11715.

Full text
Abstract:
The aim of this project is to design a microstrip phase array antenna in ADS (Advance Design System) Momentum. The resonant frequency of which is 10 GHz. Two circular patches with a radius of 5.83 mm each are used in designing the array antenna. RT-DURROID 5880 is used as a substrate for this microstrip patch array design. These circular patches are excited using coaxial probe feed and transmission lines of particular lengths and widths. These transmission lines perfectly match the impedance of the circular patches. Various parameters, for example the S-parameters, two dimensional and three di
APA, Harvard, Vancouver, ISO, and other styles
38

Mayhew-Ridgers, Gordon. "Development and modelling of new wideband microstrip patch antennas with capacitive feed probes." Thesis, Pretoria : [s.n.], 2004. http://upetd.up.ac.za/thesis/available/etd-09162004-083016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Dundar, Burhan. "Investigations On Frequency Beam Scanning Microstrip (bsms) Antenna Structures." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12610876/index.pdf.

Full text
Abstract:
Beam scanning Microstrip (BSMS) antenna is designed to work at center frequency of 10 GHz for using in the scanning applications of 9 GHz to 11 GHz band. The design parameters are defined and by using an Electromagnetic Simulation software program, the parameters are optimized. A Beam Scanning Microstrip Antenna is produced as a prototype and the measurement&rsquo<br>s results are compared with theoretical results. In conclusion, the values of deviation between theoretical and experimental results are discussed.
APA, Harvard, Vancouver, ISO, and other styles
40

Khoshniat, Ali. "A Linearly and Circularly Polarized Active Integrated Antenna." DigitalCommons@USU, 2011. https://digitalcommons.usu.edu/etd/881.

Full text
Abstract:
This thesis work presents a new harmonic suppression technique for microstrip patch antennas. Harmonic suppression in active integrated antennas is known as an effective method to improve the efficiency of amplifiers in transmitter side. In the proposed design, the antenna works as the radiating element and, at the same time, as the tuning load for the amplifier circuit that is directly matched to the antenna. The proposed active antenna architecture is easy to fabricate and is symmetric, so it can be conveniently mass-produced and designed to have circular polarization, which is preferred in
APA, Harvard, Vancouver, ISO, and other styles
41

Ooi, Shirt Fun. "Design of a high efficiency class-F power amplifier integrated with a microstrip patch antenna." Thesis, Northumbria University, 2007. http://nrl.northumbria.ac.uk/2245/.

Full text
Abstract:
This thesis presents the research carried out into the effects of load and source harmonic terminations on the efficiency of a class-F power amplifier (PA). A demonstration on the direct integration of the class-F PA and an H-shaped patch antenna using an active integrated antenna (AIA) approach is also presented. To obtain a high efficiency PA, it is necessary to ensure that the power dissipated in the active device is minimised and this is achieved by ensuring that the overlapping area between the drain voltage and current waveforms in the time domain is minimised. To minimise this overlappi
APA, Harvard, Vancouver, ISO, and other styles
42

Tastan, Mehmet. "Analysis And Design Of A Circularly Polarized Microstrip Antenna." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12607868/index.pdf.

Full text
Abstract:
In this study we tried to design a microstrip antenna, to get a suitable radiation pattern for a LEO satellite. Our aim is to get a radiation pattern that has a maximum power which is not in the broadside direction to the antenna surface<br>instead broadside radiation has a relatively lower power density. Maximum power radiation is desired to be at about 30 &ndash<br>50 degrees angle beyond the normal to the antenna surface. We desire circularly polarized radiation. We used two concentric antennas<br>one is a circular patch at the center and the other is an annular ring which is used at the ou
APA, Harvard, Vancouver, ISO, and other styles
43

Kornbau, Nathan Thomas. "Design and analysis of a wideband patch antenna for use with a miniature radar system." Diss., Connect to online resource - MSU authorized users, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
44

Iseri, Kadir. "Analysis Of Dual-polarized Aperture-coupled Microstrip Antennas With H-shaped Slots And Equivalent Circuit Modeling Of H-shaped Slots." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614527/index.pdf.

Full text
Abstract:
This thesis includes the design, production and measurement of a wideband dualpolarized X-band aperture-coupled microstrip patch antenna. The wideband and dual-polarized operation is achieved through the use of H-shaped coupling slots. Therefore, the equivalent circuit modeling of a microstrip line fed H-shaped slot is also studied in this thesis. A step-by-step procedure is followed during the design process of the dual-polarized aperture-coupled microstrip antenna. First, an aperture-coupled microstrip antenna with a single rectangular slot, that exhibits a wideband characteristic for single
APA, Harvard, Vancouver, ISO, and other styles
45

Liu, Ying-Yi, and 呂英毅. "Design of a symmetric dual-patch rectangular microstrip antenna." Thesis, 1996. http://ndltd.ncl.edu.tw/handle/72974135057875748778.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Rana, Rahul, and C. V. V. Reddy. "Design of Linearly Polarized Rectangular Microstrip Patch Antenna Using IE3D/PSO." Thesis, 2009. http://ethesis.nitrkl.ac.in/1043/1/final_copy.pdf.

Full text
Abstract:
In this project, a novel particle swarm optimization method based on IE3D is used to design an Inset Feed Linearly Polarized Rectangular Microstrip Patch Antenna. The aim of the thesis is to Design and fabricate an inset fed rectangular Microstrip Antenna and study the effect of antenna dimensions Length (L) , Width (W) and substrate parameters relative Dielectric constant (εr) , substrate thickness on Radiation parameters of Band width. Low dielectric constant substrates are generally preferred for maximum radiation. The conducting patch can take any shape but rectangular and circular configu
APA, Harvard, Vancouver, ISO, and other styles
47

Vijayaraghavan, Mohan Kumar, and Sujith Narala. "Enhancement of bandwidth and gain of a rectangular microstrip patch antenna." Thesis, 2010. http://ethesis.nitrkl.ac.in/1748/1/project_thesis.pdf.

Full text
Abstract:
In this project, method of moments based IE3D software is used to design a Microstrip Patch Antenna with enhanced gain. The aim of the project is to design a rectangular Microstrip Patch Antenna with enhanced gain and bandwidth and study the effect of antenna dimensions Length (L), Width (W) and substrate parameters relative Dielectric constant (εr), substrate thickness on antenna gain and bandwidth. The conducting patch can take any shape but rectangular and circular configurations are the most commonly used configuration. Other configurations are complex to analyze and require heavy numeric
APA, Harvard, Vancouver, ISO, and other styles
48

Zebiri, Chemseddine, S. Daoudi, F. Benabdelaziz, et al. "Gyro-Chirality Effect of Bianisotropic Substrate On the operational of Rectangular Microstrip Patch Antenna." 2016. http://hdl.handle.net/10454/8681.

Full text
Abstract:
yes<br>In this paper, the gyrotropic bi-anisotropy of the chiral medium in substrate constitutive parameters (ξc and ηc) of a rectangular microstrip patch antenna is introduced in order to observe its effects on the complex resonant frequency, half-power bandwidth and input impedance. Numerical calculations and analysis based on the dominant mode are carried out to show that the latter is directly related to the former. This paper is based on the Moment Method as full-wave spectral domain approach using sinusoidal basis functions. Two new results, namely the appearance of the difference
APA, Harvard, Vancouver, ISO, and other styles
49

Wei-HungHsu and 徐偉泓. "Apply the High Dielectric Ceramic Materials in the Development of GPS Rectangular Microstrip Patch Antenna Research." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/93817807656347240874.

Full text
Abstract:
碩士<br>國立成功大學<br>工學院工程管理專班<br>99<br>The purpose of this research is to apply the high dielectric ceramic materials in the development of GPS rectangular microstrip patch antenna, the production process design and control; to study the dielectric ceramic materials affect on the size and electrical properties of the patch antenna; and to apply this type of high dielectric ceramic material in the development of patch antenna products, particularly as the control subject within the production process. Thus, utilize this study to achieve high dielectric ceramic material application and patch antenna
APA, Harvard, Vancouver, ISO, and other styles
50

LIN, HONG-ZHI, and 林鴻志. "Curve-fitting formulas for fast determination of accurate resonant frequency of a rectangular microstrip patch antenna." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/78853107139363925765.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!