Log in

Relevant bibliographies by topics / Recyclabilité / Journal articles

To see the other types of publications on this topic, follow the link: Recyclabilité.

Journal articles on the topic 'Recyclabilité'

Author: Grafiati

Published: 4 June 2021

Last updated: 15 June 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Recyclabilité.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Le Duigou, Antoine, Isabelle Pillin, Alain Bourmaud, and Christophe Baley. "Etude de la recyclabilité d'un biocomposite PLLA/lin." Revue des composites et des matériaux avancés 18, no. 2 (2008): 233–38. http://dx.doi.org/10.3166/rcma.18.233-238.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gardoni, Mickael, Amadou Coulibaly, and Khalifa Gaye. "Conception orientée recyclabilité des produits mécatroniques. Application aux téléphones portables." European Journal of Electrical Engineering 15, no. 5 (2012): 511–30. http://dx.doi.org/10.3166/ejee.15.511-530.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

COVEZ, A., A. DUBOURG, S. NAVARRO, and N. PONT. "Recyclabilité d’un emballage : Évaluation de la triabilité avec la technologie RFID." 9, no. 9 (September 20, 2022): 37–42. http://dx.doi.org/10.36904/tsm/202209037.

Full text

Abstract:

S’interroger sur la recyclabilité d’un emballage revient à s’interroger sur toutes les étapes qu’il va parcourir dès lors qu’il est jeté dans la poubelle de tri, jusqu’à sa réintroduction dans un nouveau cycle de production. De nombreuses marques investissent pour concevoir et mettre sur le marché des emballages recyclables. Pour être recyclés, il faut qu’ils soient au préalable correctement triés par les consommateurs puis dans les centres de tri. Le tri constitue une étape complexe à évaluer en termes de performances puisque l’emballage se retrouve mélangé à d’autres déchets, dans des config

APA, Harvard, Vancouver, ISO, and other styles

4

KIMURA, Fumihiko. ""Manufacturability" and "Recyclability"." Journal of the Society of Mechanical Engineers 101, no. 954 (1998): 349–50. http://dx.doi.org/10.1299/jsmemag.101.954_349.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Peijs, Ton. "Composites for recyclability." Materials Today 6, no. 4 (2003): 30–35. http://dx.doi.org/10.1016/s1369-7021(03)00428-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Vesilind, P. Aarne. "Design for recyclability." Resources, Conservation and Recycling 4, no. 3 (1990): 253–54. http://dx.doi.org/10.1016/0921-3449(90)90006-p.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Copley, Simon. "Sustainability Beyond Recyclability." Manufacturing Management 2023, no. 5 (2023): 29–30. http://dx.doi.org/10.12968/s2514-9768(23)90411-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Passaretti, June D., Trudy D. Young, Mick J. Herman, and D. Bruce Evans. "Filler Pigments Designed for Recyclability." MRS Bulletin 19, no. 2 (1994): 41–45. http://dx.doi.org/10.1557/s0883769400039294.

Full text

Abstract:

Printing and writing paper represents 30% by weight of all domestically made paper products. Today, however, less than 50% of that paper is recycled. The problem with waste paper from homes and offices is that it contains dyes, inks, and chemicals. If these additives are not removed properly—with no fiber degradation—the recycled paper will be of an inferior quality for writing and printing.Recycling, however, is the future. In 1990, 28.9 million tons of paper were collected for recycling, representing a collection rate of 33.5%. By the year 1995, the collection rate goal is 40%, with favorabl

APA, Harvard, Vancouver, ISO, and other styles

9

Kaci, Mustapha, Chérifa Remili, Aida Benhamida, Stéphane Bruzaud, and Yves Grohens. "Recyclability of Polystyrene/Clay Nanocomposites." Molecular Crystals and Liquid Crystals 556, no. 1 (2012): 94–106. http://dx.doi.org/10.1080/15421406.2012.635922.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

OZALTAY, Umut Ozgur, Alper GUNOZ, and Memduh KARA. "The Recyclability of Composite Materials." International Conference on Applied Engineering and Natural Sciences 1, no. 1 (2023): 432–35. http://dx.doi.org/10.59287/icaens.1035.

Full text

Abstract:

In this study, the recyclability of composite materials created using various methods today, the problems that may be encountered during recycling, advantages and disadvantages were discussed. Information about the general properties of recycled composite materials was obtained and summarized.

APA, Harvard, Vancouver, ISO, and other styles

11

Mohammed A. Abuqunaydah, Zayad M. Sheggaf, Muheieddin Meftah Elghanudi, and Salem A. Salem. "Recyclability of aluminium piston alloy." مجلة جامعة بني وليد للعلوم الإنسانية والتطبيقية 8, no. 3 (2023): 99–103. http://dx.doi.org/10.58916/jhas.v8i3.122.

Full text

Abstract:

One of the most recycled and recyclable materials now in use is aluminium. Frequently, aluminium cans, automobile components, and window frames are recycled back into itself. A vital component of the contemporary aluminium industry is recycling. Recycled aluminium production uses only around 5% of the energy required to produce new aluminium, resulting in lower carbon emissions and cost savings for both corporations and end users. As a result, today's use of roughly 75% of all aluminum created throughout history. Recycling rates for aluminium exceed 90% in the majority of industrial sectors, i

APA, Harvard, Vancouver, ISO, and other styles

12

Keller, Jonas, Carla Scagnetti, and Stefan Albrecht. "The Relevance of Recyclability for the Life Cycle Assessment of Packaging Based on Design for Life Cycle." Sustainability 14, no. 7 (2022): 4076. http://dx.doi.org/10.3390/su14074076.

Full text

Abstract:

The awareness for more environmentally sustainable packaging solutions is steadily growing. With both consumers and manufacturers looking to minimize their impacts on the environment, the need for easy-to-implement and standardized measures strengthening a circular economy rises. In the research, the goal was to determine whether the carbon footprint and circularity of non-food plastic packaging can be improved by simple design changes. The results should then lead to design recommendations, providing a Design for Life Cycle approach. The methodology of the study was to conceptually design a s

APA, Harvard, Vancouver, ISO, and other styles

13

Mancini, Sandro Donnini, and Maria Zanin. "Recyclability of PET from virgin resin." Materials Research 2, no. 1 (1999): 33–38. http://dx.doi.org/10.1590/s1516-14391999000100006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Houé, Raymond, and Bernard Grabot. "FORMALISATION OF NORMS FOR RECYCLABILITY ASSESSMENT." IFAC Proceedings Volumes 39, no. 3 (2006): 223–28. http://dx.doi.org/10.3182/20060517-3-fr-2903.00128.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Bennert, Thomas, and Jean-Valery Martin. "Recyclability of Polyphosphoric Acid–Modified Asphalt." Transportation Research Record: Journal of the Transportation Research Board 2207, no. 1 (2011): 79–88. http://dx.doi.org/10.3141/2207-11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Matsuoka, S. "Recyclability of stainless steel railway vehicles." Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 217, no. 4 (2003): 279–84. http://dx.doi.org/10.1243/095440903322712883.

Full text

Abstract:

Current trends in environmental issues mean that manufacturers are now required to take responsibility for the recycling of their products. In the railway industry, the recycling of mild steel vehicles has been carried out and recycling of aluminium vehicles has been tried and tested but not stainless steel vehicles. This paper describes a field test used to find out the recyclability of a stainless steel vehicle. The costs of disassembly and recycling for several types of vehicle are compared and it is demonstrated that the recycling of stainless steel vehicles is the cheapest.

APA, Harvard, Vancouver, ISO, and other styles

17

Amirkhanian, Serji N., and Bill Williams. "Recyclability of Moisture Damaged Flexible Pavements." Journal of Materials in Civil Engineering 5, no. 4 (1993): 510–30. http://dx.doi.org/10.1061/(asce)0899-1561(1993)5:4(510).

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Zakiyuddin, Ahmad, Decky Joesiana Indrani, Rifqi A. Khoirurrijal, and Sotya Astutiningsih. "Recyclability of Dental Gypsum via Calcination." Materials Science Forum 1000 (July 2020): 90–96. http://dx.doi.org/10.4028/www.scientific.net/msf.1000.90.

Full text

Abstract:

Nowadays, either keeping or throwing out the final product of dental cast is the most common thing to do. The waste from dentistry can be considered toxic if not handled specifically and separately to other waste. Hence, the recycling process can reduce its effect and the waste of dental casts. It can also reduce the cost of producing new high-grade dental gypsum. This paper studies the behavior of before-after recycle and heat treatment to several grades of dental gypsum that will be used as impression material or dies. As it is designed to be an impression material that will undergo heat tre

APA, Harvard, Vancouver, ISO, and other styles

19

Meira, Flora Alexandre, Maria da Paz Medeiros Fernandes, Aluísio Braz de Melo, and Elisângela Pereira da Silva. "Study of EVA Blocks Waste Recyclability." Key Engineering Materials 517 (June 2012): 646–52. http://dx.doi.org/10.4028/www.scientific.net/kem.517.646.

Full text

Abstract:

The use of EVA (Ethylene Vinyl Acetate) waste, from shoes industry, in the production of pre-molded block (EVA block) has been researched in the last 12 years. The results have shown great potential for these wastes to be used as lightweight aggregate, to replace natural aggregate in the manufacture of bricks made of cement based composites. This article examines the potentiality of waste EVA blocks recyclability, as aggregate in the production of new EVA blocks. In the experiment EVA blocks were molded in the mix proportion of 1:5 in volume (20% of sand and 80% of EVA) and determined the mass

APA, Harvard, Vancouver, ISO, and other styles

20

Bocci, Edoardo, and Emiliano Prosperi. "Recyclability of reclaimed asphalt rubber pavement." Construction and Building Materials 403 (November 2023): 133040. http://dx.doi.org/10.1016/j.conbuildmat.2023.133040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Huisman, J., C. B. Boks, and A. L. N. Stevels. "Quotes for environmentally weighted recyclability (QWERTY): Concept of describing product recyclability in terms of environmental value." International Journal of Production Research 41, no. 16 (2003): 3649–65. http://dx.doi.org/10.1080/0020754031000120069.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Diakun, J., E. Dostatni, I. Rojek, and P. Rybacki. "Recycling-oriented analysis of domestic vacuum cleaner." Journal of Physics: Conference Series 2198, no. 1 (2022): 012061. http://dx.doi.org/10.1088/1742-6596/2198/1/012061.

Full text

Abstract:

Abstract A study of recyclability of a selected product, based on analyses conducted using an original application for the assessment of recyclability of products. The term ‘recycling’ has been defined and the role of recyclability in the process of eco-design specified. Some general recycling-oriented assessment methods have been discussed. The method used in the study, based on a recycling-oriented product model (RmW) and an agent-based system, has been described. The analysis has been applied to a domestic vacuum cleaner, considering the specificity of the industry. A model of the vacuum cl

APA, Harvard, Vancouver, ISO, and other styles

23

Kravchenko, Igor N., Yri S. Migachev, Yury A. Kuznetsov, Alexandr М. Davydkin, and Mikhail N. Erofeev. "Studying the Influence of the Technical Performance Complexity and the Nomenclature and Quantitative Composition of Agricultural Machinery on Its Recyclability Rate." Engineering Technologies and Systems 30, no. 4 (2020): 683–98. http://dx.doi.org/10.15507/2658-4123.030.202004.683-698.

Full text

Abstract:

Introduction. Rational recycling of agricultural machinery, which has reached the end of its service life, is an urgent problem of the modern agro-industrial complex. In this regard, using the physical model for recycling agricultural machinery, reached its service life, is a solution to the problem of resource recycling. Materials and Methods. The paired linear regression analysis method was used to conduct statistical research of experimental data and develop a regression model. The authors calculated the recyclability rate values for the entire agricultural machinery nomenclature and its av

APA, Harvard, Vancouver, ISO, and other styles

24

Senba, Takeshi. "Recyclability of Cellulose Nano Fiber Reinforced Plastic." Seikei-Kakou 30, no. 2 (2018): 56–58. http://dx.doi.org/10.4325/seikeikakou.30.56.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

van Nielen, Sander S., René Kleijn, Benjamin Sprecher, Brenda Miranda Xicotencatl, and Arnold Tukker. "Early-stage assessment of minor metal recyclability." Resources, Conservation and Recycling 176 (January 2022): 105881. http://dx.doi.org/10.1016/j.resconrec.2021.105881.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

NISHITANI, Keigo, Shuichi KATO, Naoki SUGIYAMA, Manabu NOMURA, Hiroyuki HAMADA, and Shigeru IKEMOTO. "Recyclability and mechanical properties of painted bumpers." Proceedings of the Materials and processing conference 2019.27 (2019): 113. http://dx.doi.org/10.1299/jsmemp.2019.27.113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Sánchez, C., M. Hortal, C. Aliaga, A. Devis, and V. A. Cloquell-Ballester. "Recyclability assessment of nano-reinforced plastic packaging." Waste Management 34, no. 12 (2014): 2647–55. http://dx.doi.org/10.1016/j.wasman.2014.08.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Boccarusso, Luca, Massimo Durante, Fabio Iucolano, Antonio Langella, Fabrizio Memola Capece Minutolo, and Davide Mocerino. "Recyclability Process of Standard and Foamed Gypsum." Procedia Manufacturing 47 (2020): 743–48. http://dx.doi.org/10.1016/j.promfg.2020.04.227.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Fu, Jing, Matthew Krantz, Hui Zhang, et al. "Investigation of the recyclability of powder coatings." Powder Technology 211, no. 1 (2011): 38–45. http://dx.doi.org/10.1016/j.powtec.2011.03.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Şahan Arel, Hasan. "Recyclability of waste marble in concrete production." Journal of Cleaner Production 131 (September 2016): 179–88. http://dx.doi.org/10.1016/j.jclepro.2016.05.052.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Fukushige, Shinichi, Yoichiro Inoue, and Yasushi Umeda. "3202 Lifecycle Design Based on Product Recyclability." Proceedings of Design & Systems Conference 2009.19 (2009): 646–47. http://dx.doi.org/10.1299/jsmedsd.2009.19.646.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Mooney, Peter J. "Recyclability hinders plastic containers in the 1990s." JOM 42, no. 1 (1990): 9. http://dx.doi.org/10.1007/bf03220514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Shimizu, Toshiaki, Yasoi Yasuda, Hitoshi Ohya, and Atsushi Inaba. "Evaluation of Recyclability and Disassembility of Videotapes." Journal of the Japan Society of Waste Management Experts 11, no. 5 (2000): 241–50. http://dx.doi.org/10.3985/jswme.11.241.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Berry, David. "Recyclability and the selection of packaging materials." JOM 44, no. 12 (1992): 21–25. http://dx.doi.org/10.1007/bf03223190.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Lamontagne, Nancy D. "Good Design Improves Product Life and Recyclability." Plastics Engineering 73, no. 9 (2017): 36–39. http://dx.doi.org/10.1002/j.1941-9635.2017.tb01796.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Copenhaver, Katie, Tyler Smith, Kristina Armstrong, et al. "Recyclability of additively manufactured bio-based composites." Composites Part B: Engineering 255 (April 2023): 110617. http://dx.doi.org/10.1016/j.compositesb.2023.110617.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Chaitanya, Saurabh, Inderdeep Singh, and Jung Il Song. "Recyclability analysis of PLA/Sisal fiber biocomposites." Composites Part B: Engineering 173 (September 2019): 106895. http://dx.doi.org/10.1016/j.compositesb.2019.05.106.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Kohári, Andrea, and Tamás Bárány. "The growth and recyclability of thermoplastic polyurethanes." Express Polymer Letters 18, no. 5 (2024): 459–60. http://dx.doi.org/10.3144/expresspolymlett.2024.33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Rane, Kedarnath, and Prashant P. Date. "Recycling Potential for Finely Divided Ferrous Metallic Scrap Using Powder Technology." Recycling 3, no. 4 (2018): 59. http://dx.doi.org/10.3390/recycling3040059.

Full text

Abstract:

Enormous amount of scrap is generated on the shopfloor during manufacturing. Energy needed to melt increasing quantities of scrap will be ever increasing, and so will be the loss of metal during melting. Hence, conversion of scrap directly into marketable products by solid state processing methods is economical due to a lower energy requirement and a greater yield compared to the melting route. This makes the process more environmentally friendly. However, not all materials can be recycled in a solid state, with equal ease. One therefore needs to quantitatively assess the recyclability of a gi

APA, Harvard, Vancouver, ISO, and other styles

40

Shi, Changxia, Michael L. McGraw, Zi-Chen Li, Luigi Cavallo, Laura Falivene, and Eugene Y. X. Chen. "High-performance pan-tactic polythioesters with intrinsic crystallinity and chemical recyclability." Science Advances 6, no. 34 (2020): eabc0495. http://dx.doi.org/10.1126/sciadv.abc0495.

Full text

Abstract:

Three types of seemingly unyielding trade-offs have continued to challenge the rational design for circular polymers with both high chemical recyclability and high-performance properties: depolymerizability/performance, crystallinity/ductility, and stereo-disorder/crystallinity. Here, we introduce a monomer design strategy based on a bridged bicyclic thiolactone that produces stereo-disordered to perfectly stereo-ordered polythiolactones, all exhibiting high crystallinity and full chemical recyclability. These polythioesters defy aforementioned trade-offs by having an unusual set of desired pr

APA, Harvard, Vancouver, ISO, and other styles

41

Li, Tian, Jing Qiu, Pan Wang, and An Wang. "Analysis of recyclability of M1 automotive products in China based on different material classifications." Advances in Economics and Management Research 1, no. 3 (2023): 296. http://dx.doi.org/10.56028/aemr.3.1.296.

Full text

Abstract:

The paper systematically analyzes the recyclability of more than 10000 M1 automotive products in China. The application of automotive materials is studied from five aspects: the average level of vehicle recyclability, different lines, different categories, traditional and new energy vehicles, and the application of different materials. Through comparative analysis of the application of different materials to provide data support for the automotive industry.

APA, Harvard, Vancouver, ISO, and other styles

42

Nimmegeers, Philippe, Alexej Parchomenko, Paul De Meulenaere, et al. "Extending Multilevel Statistical Entropy Analysis towards Plastic Recyclability Prediction." Sustainability 13, no. 6 (2021): 3553. http://dx.doi.org/10.3390/su13063553.

Full text

Abstract:

Multilevel statistical entropy analysis (SEA) is a method that has been recently proposed to evaluate circular economy strategies on the material, component and product levels to identify critical stages of resource and functionality losses. However, the comparison of technological alternatives may be difficult, and equal entropies do not necessarily correspond with equal recyclability. A coupling with energy consumption aspects is strongly recommended but largely lacking. The aim of this paper is to improve the multilevel SEA method to reliably assess the recyclability of plastics. Therefore,

APA, Harvard, Vancouver, ISO, and other styles

43

Ibáñez-García, Ana, Asunción Martínez-García, and Santiago Ferrándiz-Bou. "Recyclability Analysis of Starch Thermoplastic/Almond Shell Biocomposite." Polymers 13, no. 7 (2021): 1159. http://dx.doi.org/10.3390/polym13071159.

Full text

Abstract:

This article is focused on studying the effect of the reprocessing cycles on the mechanical, thermal, and aesthetic properties of a biocomposite. This process is based on starch thermoplastic polymer (TPS) filled with 20 wt% almond shell powder (ASP) and epoxidized linseed oil (ELO) as a compatibilizing additive. To do so, the biocomposite was prepared in a twin-screw extruder, molded by injection, and characterized in terms of its mechanical, thermal, and visual properties (according to CieLab) and the melt flow index (MFI). The analyses carried out were tensile, flexural, Charpy impact tests

APA, Harvard, Vancouver, ISO, and other styles

44

Wang, Wencai, Xueyang Bai, Siao Sun, Yangyang Gao, Fanzhu Li, and Shikai Hu. "Polysiloxane-Based Polyurethanes with High Strength and Recyclability." International Journal of Molecular Sciences 23, no. 20 (2022): 12613. http://dx.doi.org/10.3390/ijms232012613.

Full text

Abstract:

Polysiloxanes have attracted considerable attention in biomedical engineering, owing to their inherent properties, including good flexibility and biocompatibility. However, their low mechanical strength limits their application scope. In this study, we synthesized a polysiloxane-based polyurethane by chemical copolymerization. A series of thermoplastic polysiloxane-polyurethanes (Si-TPUs) was synthesized using hydroxyl-terminated polydimethylsiloxane containing two carbamate groups at the tail of the polymer chains 4,4′-dicyclohexylmethane diisocyanate (HMDI) and 1,4-butanediol as raw material

APA, Harvard, Vancouver, ISO, and other styles

45

Lei, Xingfeng, Yinghua Jin, Hongliang Sun, and Wei Zhang. "Rehealable imide–imine hybrid polymers with full recyclability." J. Mater. Chem. A 5, no. 40 (2017): 21140–45. http://dx.doi.org/10.1039/c7ta07076d.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Wang, Shuwang. "DESIGN FOR RECYCLABILITY METHOD BASED ON RECYCLING ELEMENT." Chinese Journal of Mechanical Engineering 41, no. 10 (2005): 102. http://dx.doi.org/10.3901/jme.2005.10.102.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Lastra-González, Pedro, Irune Indacoechea-Vega, Miguel A. Calzada-Pérez, and Daniel Castro-Fresno. "Recyclability Potential of Induction-Healable Porous Asphalt Mixtures." Sustainability 12, no. 23 (2020): 9962. http://dx.doi.org/10.3390/su12239962.

Full text

Abstract:

The potential recyclability of healable asphalt mixtures has been analyzed in this paper. A healable porous asphalt mixture with steel wool fibers was artificially aged in order to assess its recyclability. This mixture was used as reclaimed asphalt in a new porous asphalt mixture, whose mechanical and healing capacities were studied and compared with the behavior of the original porous asphalt mixture. The quantity of reclaimed asphalt mixture added was 40%; besides, in order to recover the properties of the aged binder, and incorporate the last advances in the recyclability of bituminous mix

APA, Harvard, Vancouver, ISO, and other styles

48

OYASATO, Naohiko, and Hideki KOBAYASHI. "Recyclability Evaluation Method Considering Material Combination and Degradation." JSME International Journal Series C 49, no. 4 (2006): 1232–39. http://dx.doi.org/10.1299/jsmec.49.1232.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Zhu, Jian-Bo, Eli M. Watson, Jing Tang, and Eugene Y. X. Chen. "A synthetic polymer system with repeatable chemical recyclability." Science 360, no. 6387 (2018): 398–403. http://dx.doi.org/10.1126/science.aar5498.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

OYASATO, Naohiko, and Hideki KOBAYASHI. "Recyclability Evaluation Method Considering Material Combination and Degradation." Transactions of the Japan Society of Mechanical Engineers Series C 71, no. 701 (2005): 343–50. http://dx.doi.org/10.1299/kikaic.71.343.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!