To see the other types of publications on this topic, follow the link: Referenční.
Dissertations / Theses on the topic 'Referenční'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Referenční.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Chotaš, Kryštof. "Polohový a kursový referenční systém." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220851.
Full textAbstract:
This thesis deals with inertial navigation systems issues. It describes basics of reference frames, coordinate systems and matrix calculations for AHRS. There are also basic information about inertial sensors, inertial measurements units and its mistakes. One of the purposes of this paper could be explanation of inertial navigation systems terms. The main object of this thesis is to explore the influence of using multiple sensors of same type to enhance measurements of AHRS systems.
2
Knop, Jaroslav. "Nízkošumový referenční zdroj typu bandgap." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217239.
Full textAbstract:
This work deals with principles of design low noise bandgap reference using multiple in the process EPI92. The voltage reference is described and theoretic analysis noise performances is made. Results are compared with measured data realized breadboard BG reference and fabricated low drop-out regulators, which using different accurate bandgap references cells.
3
Skalický, Pavel. "Referenční zdroje napětí a proudu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219331.
Full textAbstract:
The topic of the master´s thesis are voltage and current reference sources. There is detailed description of current and voltage references, which are basic building blocks of many analog circuits, in the theoretical part. Next part of the master´s thesis is the design of a voltage reference source, the design of a voltage reference generating two voltages and a current reference source. The correct function of all circuits have been verified using simulations, especially dependence of the output voltage or current on supply voltage or dependence of the output voltage or current when the ambient temperature is changed.
4
Děcký, Miroslav. "Referenční návrh HID periferie Touch Pad." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377103.
Full textAbstract:
This master’s thesis deals with the draft and design of HID periphery Touchpad. The Kinetis microcontroller produced by NXP, TSI periphery and embedded library NXP Touch are used for the design. The resulting device is connected as USB HID type mouse or trackpad. Hardware part of the project is implemented by whole MCU Kinetis Family on PCBs designed by author, one part also uses evaluation kits NXP Freedom KL25z and KE15z.
5
Maryška, Miloš. "Referenční model řízení ekonomiky podnikové informatiky." Doctoral thesis, Vysoká škola ekonomická v Praze, 2006. http://www.nusl.cz/ntk/nusl-77067.
Full textAbstract:
Thesis is focused on management of business informatics. The aim of this thesis is to develop Reference management model for managing business informatics and to integrate this reference model into ITGPM Reference management model for managing business informatics. Within an analytical part is reviewed current situation in the field of managing economics of business informatics as well as managing economics out of business informatics. Attention is paid to costs in busi-ness informatics, their classification, categorisation and their management. Very important part is analysis of methods for cost management thought various types of calculations and especially thought ABC methods. The principles of these methods are applied in the design of the Reference model. Further are solved questions of business informatics effect, their categorisations, classification, definition of their attributes and also their management. Development of this field is an important part of this thesis. The main part of the thesis contains the Business informatics management Reference model design. This design contains identification of the most important metrics of measuring business informatics, dimen-sions used for analysis of proposed metrics and relationships between metrics and dimensions. An impor-tant part is also a presentation level design and definition of condition that should be fulfilled, if the pres-entation level should be beneficial to final users. The main part also contains designed method for imple-mentation of the Reference model into a company. Application parts are devoted to preparation of a pilot application based on the Reference model design developed in the main part of the thesis. Designed Reference model for managing business informatics is adapted according to the needs, requests and characteristics of the company in which this pilot application is implemented. In these parts are also verified designs, processes and methods designed in the first and second part of this thesis, so there are verified possibilities of adaption of the designed model to the requests of the target company, adaption of the pilot application to the target environment including data level, ELT procedures and presentation level. In application part of the thesis is verified correctness of the designed implantation methodology into the company.
6
Mišurec, David. "Referenční katalog produktů a služeb veřejné správy." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-165225.
Full textAbstract:
Aim of this diploma thesis is to develop a referential catalogue of public administration services, which should provide its users with summary of services provided by public administration. Theoretical part of thesis at first defines notions and presents problems connected with providing public administration services in context of development in period after Velvet revolution in Czech Republic. After that, work follows with global situation in European Union and concentrates on one country (Austria) and its services. During design of the catalogue was used actual knowledge and research about service providing, which reflects customer oriented approach and access through single point of contact. The necessity of splitting the whole process of service providing into two parts, service access and service execution part, is emphasized. Within design of catalogue are presented two main models – domain model describing the structure of catalogue itself and service model, describing services. Based on analysis of possible uses and its integration potential with existing systems are defined its main benefits and is devised integrating principles designed in catalogue into „Portal veřejné správy“.
7
Vodsloň, Ondřej. "Vliv referenčních skupin na spotřební chování studentů gymnázií." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-3391.
Full textAbstract:
Práce pojednává o vlivu referenčních skupin a aplikaci marketingových technik na ovlivňování spotřebního chování gymnaziálních studentů. Práce se snaží nalézt odpověď na otázku, zda existuje rozdíl v působení referenčních skupin na spotřební chování studentů státních a soukromých gymnázií v Praze. V rámci práce jsou nastíněny nejvhodnější marketingové techniky pro efektivní působení na cílovou skupinu gymnazistů. Součástí práce je analýza dvou dotazníkových výzkumů, a jedné provedené focus group.
8
Příhoda, Stanislav. "Vztah EA a vybraných referenčních modelů." Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-162569.
Full textAbstract:
This thesis is focused on the competence of Enterprise Architecture, which is discussed in the introductory theoretical part as a comprehensive practice and subsequently in the relation between Enterprise Architecture and a specific aspect that is used in the EA initiatives - the reference models is discussed. In relation to the set objective the basic definitions of Enterprise Architecture are discussed and analyzed in the Chapter 2, and brief look at the description of the architectures along with the key business drivers and benefits of EA is also provided. In the Chapter 3 the content evolution of architectural disciplines is presented, particularly in terms of the scope of EA and maturity in the enterprises. A general analysis of the Enterprise Architecture is completed in the Chapter 4 where is addressed a crucial aspect of Enterprise Architecture - the architectural frameworks. The second part focuses on the key objectives of the thesis related to the reference models. The criterial evaluation system of reference models and the classification scheme for reference models are introduced as the key proposed approaches. In chapter 5.3 is also provided the structural analysis of five selected reference models that are evaluated on the basis of the predefined criteria and classified in the proposed scheme at the end. Both proposed approaches, the criterial evaluation system and the classification scheme for reference models, are in the chapter 5.6 assessed and verified by the subject matter experts in the field of EA.
9
Brádlerová, Tereza. "Odpadní vody: fytoindikátory v okolí horských bud - případová studie Niklův vrch a Rennerovy boudy (Krkonošský národní park)." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-259808.
Full textAbstract:
This diploma thesis was solved in Niklův vrch and Rennerovy boudy, areas located in the eastern part of The Krkonoše Mountains National Park.
The main aims of this work were vegetation survey and description of environmental factors by Ellenberg indicator values of meadow areas contaminated by leaked sewage and meadows in their vicinity (referential areas). Another objective of this study was to determine soil pH, acceptable phosphorus and total nitrogen content and heavy metals amount in soil samples. Based on all collected data was proposed future management for each area.
The negative influence of leaking sewage on meadows in Niklův vrch wasn´t confirmed, because of their highly effective cleaning by three-compartment septic tank and biological filter before discharge into surface waters.
Leaked sewage loading was demonstrated in Rennerovy boudy, but only in the area just below the septic tank. The reason of the loading is unsatisfactory condition of the septic tank itself (change to cesspool by blinding discharge and sunken cover). This area was characterized by low species diversity, which is connected with the lowest number of plant species found there (12 species). Based on the habitat of dominant nitrophilous species Urtica dioica and species with nitrophilous tendencies (Alopecurus pratensis, Geranium sylvaticum and Chaerophyllum hirsutum) was determined association Rumicetum alpini Beger 1922 here.
Soil from the area affected by the leaked sewage was characterized by the highest pH/KCl and total nitrogen content and also increased contents of acceptable and total P and K compared to other soil samples.
To suppress this undesirable community Rumicetum alpini Beger 1922 is particularly necessary to improve the process of purifying leaking sewage by replacement the cesspool for household wastewater treatment plant. The distribution of this community also affects the absence of management. Therefore, it seems necessary to renew one-year mowing by scythe of this area.
10
Vrátil, Jiří Mgr. "Celebrity v reklamě na alkoholické nápoje." Master's thesis, Vysoká škola ekonomická v Praze, 2006. http://www.nusl.cz/ntk/nusl-380.
Full textAbstract:
Cílem práce bylo vytvořit doporučení pro výběr celebrity do reklamy na alkoholické nápoje, respektive tří tuzemských značek (Becherovka, Absinth a Královská medovina). Uvádím použitou metodiku, dále se věnuji vlastnímu výběru značek alkoholických nápojů (proč jsem se rozhodl pro dané brandy) a předkládám stručnou charakteristiku jak nápojů, tak výrobců, pro které mohou být výstupy mé práce zejména užitečné. Následuje výběr charakteristik a vlastností člověka, jež by měly odpovídat image jednotlivých značek alkoholických nápojů a výběr celebrit potenciálně vhodných k propagaci zvolených značek. Poté prezentuji výsledky vlastního marketingového šetření, jehož hlavním cílem byl výběr celebrit vhodných k propagaci výše jmenovaných nápojů (doplňkově jsem pak na základě zmíněného výzkumu určil optimální prostředí pro exekuci reklamy).
11
Kočišová, Jana. "Celebrity marketing." Master's thesis, Vysoká škola ekonomická v Praze, 2007. http://www.nusl.cz/ntk/nusl-1538.
Full textAbstract:
Diplomová práce začíná uvedením do problému nákupního chování a vliv referenčních skupin na spotřebitele, pokračuje historii celebrity marketingu, využitím celebrit v reklamě, jako komunikačního nástroje. Práce také popisuje vliv celebrit na vzhled, módu a jejich působení v sociální sféře a politice. Na konci teoretické části popisuje vodítka, jak si celebrity vybírat, jak jich kontaktovat a vyjednávat s nimi a v závěru jsou popsané výhody a nevýhody využití celebrit v reklamě. Praktická část se zaměřuje na porovnání České republiky a zahraničí ve vnímání a ovlivňování zákazníků celebritami.
12
Vrátil, Jiří. "Celebrity v reklamě na alkoholické nápoje." Master's thesis, Vysoká škola ekonomická v Praze, 2006. http://www.nusl.cz/ntk/nusl-14992.
Full textAbstract:
Cílem práce bylo vytvořit doporučení pro výběr celebrity do reklamy na alkoholické nápoje, respektive tří tuzemských značek (Becherovka, Absinth a Královská medovina). Uvádím použitou metodiku, dále se věnuji vlastnímu výběru značek alkoholických nápojů (proč jsem se rozhodl pro dané brandy) a předkládám stručnou charakteristiku jak nápojů, tak výrobců, pro které mohou být výstupy mé práce zejména užitečné. Následuje výběr charakteristik a vlastností člověka, jež by měly odpovídat image jednotlivých značek alkoholických nápojů a výběr celebrit potenciálně vhodných k propagaci zvolených značek. Poté prezentuji výsledky vlastního marketingového šetření, jehož hlavním cílem byl výběr celebrit vhodných k propagaci výše jmenovaných nápojů (doplňkově jsem pak na základě zmíněného výzkumu určil optimální prostředí pro exekuci reklamy).
13
Jelínek, Petr. "Využití referenčního klimatického roku pro hodnocení a návrh termického solárního systému." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-408022.
Full textAbstract:
This thesis describes utilisation of test reference year for design and evaluation of solar thermal system. The evaluation was performed on a solar thermal system of a single-family house in Rapotice, Czechia. Long-term monitoring of the system as well as indoor and outdoor climate were performed there. Measured data were compared with test reference year and data in Meteonorm database. Selected boundary conditions of the solar thermal system were compared with numerical simulations in Polysun. The results of the comparison were statistically analysed. Results of the simulations utilizing test reference year were closer to the on-site measurements than dates from Meteonorm. Therefore it could be concluded that test reference year is the best database of climate data for design of solar thermal system in Czechia.
14
Kolář, Petr. "Význam referenčních úrokových sazeb a manipulace s úrokovou sazbou LIBOR." Master's thesis, Vysoká škola ekonomická v Praze, 2015. http://www.nusl.cz/ntk/nusl-207126.
Full textAbstract:
This diploma thesis is focused on a role of reference interest rates in developed market economies. There are described interest rate transmission mechanism and discussed factors, which led to manipulation of the LIBOR. How the manipulation was done and what reactions of supervisory authorities it induced. There are also listed proposed recommendations to ensure transparent reference indicators. This work also includes analysis of reference interest rates used in the Czech Republic. At the end of the thesis can be found application of a reference rate fixing process in a game theory model as well as application of Benford´s law as an indicator of the manipulation.
15
Sládek, Miroslav. "Testování výškové přesnosti přijímačů GNSS RTK." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-390182.
Full textAbstract:
he main subject of this thesis is accuracy testing of three GNSS RTK receivers – Trimble R4, Leica 1200, Topcon GRS-1. It is an outdoor research using different correction types provided by CZEPOS and Trimble.
16
Vydra, Pavel. "Návrh referenčního modelu vybraných procesů marketingové podpory a jeho zhodnocení." Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-198264.
Full textAbstract:
Corporate expenses for IT support of marketing are surging every year, and therefore the processes of marketing support, which contain all the technical aspects of marketing campaign execution and measurement, are attracting more attention than before. The diploma thesis introduces a basic overview of direct marketing and marketing support operations in corporations and presents a reference model to help optimize the marketing support processes. The thesis contains a research of theoretical fundamentals of process modelling and reference model building, a basic overview of corporate direct marketing, an analysis of direct marketing processes and the most relevant processes of marketing support. The reference model, which is based on the outputs from both theoretical parts, includes a detailed description of marketing support processes and outlines the process boundaries in the form of SLA. The model is then tested on two case studies, which emphasize the practical opportunities as well as the major benefits of using the model.
17
Hurtová, Zuzana. "Benchmarking finanční výkonnosti (na příkladu konkrétního podniku)." Master's thesis, Vysoká škola ekonomická v Praze, 2012. http://www.nusl.cz/ntk/nusl-124761.
Full textAbstract:
Presented diploma thesis compares financial performance of a selected company with the financial performance reached in a given industrial sector. INFA criteria are used for the evaluation of the company and of its performance. INFA is a system of pyramidal decomposition of economic value added. The sector database of the Ministry of Industry and Trade of the Czech Republic was used for the referential analysis. The thesis consists of two parts. The first part defines financial analysis, economic value added and INFA criterion system from a theoretical point of view. The second part applies INFA on the specific company. The values of company indicators determined by this method are then compared with average values in the sector. Discrepancies are discussed and elucidated. The final chapter evaluates advantages and disadvantages of the used benchmarking model.
18
Bartoš, Jan. "Master Data Integration hub - řešení pro konsolidaci referenčních dat v podniku." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-73508.
Full textAbstract:
In current information systems the requirement to integrate disparate applications into cohesive package is greatly accented. While well-established technologies facilitating functional and comunicational integration (ESB, message brokes, web services) already exist, tools and methodologies for continuous integration of disparate data sources on enterprise-wide level are still in development. Master Data Management (MDM) is a major approach in the area of data integration and referrential data management in particular. It encompasses the referrential data integration, data quality management and referrential data consolidation, metadata management, master data ownership, principle of accountability for master data and processes related to referrential data management. Thesis is focused on technological aspects of MDM implementation realized via introduction of centrallized repository for master data -- Master Data Integration Hub (MDI Hub). MDI Hub is an application which enables the integration and consolidation of referrential data stored in disparate systems and applications based on predefined workflows. It also handles the master data propagation back to source systems and provides services like dictionaries management and data quality monitoring. Thesis objective is to cover design and implementation aspects of MDI Hub, which forms the application part of MDM. In introduction the motivation for referrential data consolidation is discussed and list of techniques used in MDI Hub solution development is presented. The main part of thesis proposes the design of MDI Hub referrential architecture and suggests the activities performed in process of MDI Hub implementation. Thesis is based on information gained from specialized publications, on knowledge gathererd by delivering projects with companies Adastra and Ataccama and on co-workers know-how and experience. Most important contribution of thesis is comprehensive view on MDI Hub design and MDI Hub referrential architecture proposal. MDI Hub referrential architecture can serve as basis for particular MDI Hub implementation.
19
Sládok, Marcel. "Kultúrno-referenčné centrum Trenčín." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392309.
Full textAbstract:
The title of this master´s thesis is the elaboration of a design for a newly builded building of civil importance - a cultural center. Object is 3 storey, situated on the flat plot in the wider center of Trencin. The center includes a concert hall and facilities for training and recording musical productions. The concert hall forms the left part of the building and consists of a stage, adjacent auditoriums with 352 seats, communication spaces and backgrounds for needs of performance. On the right side there are facilities for testing and recording of music with its own facilities, an entrance hall with a café and a seating area. The construction system consists of a monolithic vertical and horizontal RC structure, complemented in a concert hall with a beam ceiling. The roof is flat in 2 levels, the facade and the envelope of the building is a combination of glass facade and the ETICS insulation system, the highest part of the building is created by cetris tiles. Drawing part is drawn in AutoCAD, other programs used (eg to calculate physical properties of structures etc.) are DEKsoft, WDLS.
20
Čavoj, Ondřej. "Výpočet aerodynamických charakteristik vozidla s vybočením." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230267.
Full textAbstract:
This Diploma thesis deals with CFD simulations of flow around vehicles subjected to a crosswind with MIRA Reference Car in three body shapes with a diffuser serving as a vehicle. It contains tuning of computational grid and chosen solver settings in Fluent, mostly for v2f turbulence model. The main output of this thesis is a simulation of all body shapes in several crosswind angles in steady state and one chosen body shape with one chosen crosswind angle in unsteady state. All results are validated against measurements taken with full scale models in MIRA windtunnel.
21
Grigarová, Pavla. "Vliv internetu a sociálních sítí na spotřební chování." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-73294.
Full textAbstract:
Methods used in the thesis include online polling and personal interviews with experts. The goal was to theoretically cover the area of internet marketing and analyze own conducted research. Research has revealed that the internet had the biggest influence on the phases of assessing the options, buying and searching for information of the last purchases of the respondents. The categories which were mostly affected by the internet were electronics and tourism services. With the increasing price of goods the influence of the internet was also growing. The most important internet marketing tools were web sites, search engines and search tools to compare prices. Concerning the social networks, their influence on consumer decision-making was only marginal. The work includes a comparison of theoretical knowledge with research and expert opinions as well.
22
Madron, Tomáš. "Diferenciální GPS." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217753.
Full textAbstract:
This master’s thesis is the design of the system of the differential GPS, creation of the software for basic wireless communication between 2 GPS receivers, and practical tests of the designed system. Parameters and characteristics of system were determined and they should inform us better about the appropriateness of the designed system for navigation of a mobile robot in outside conditions.
23
Khorel, Tomáš. "Analýza vlivu rizik na ekonomickou efektivnost větrných elektráren v ČR." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-3829.
Full textAbstract:
The work focuses on wind-power energetics area in the Czech republic. On the basis of a set referential project, which is typical for current Czech conditions, it intends to answer two key questions. The first one deals with risk and inquires into how critical individual factors are. For this purpose financial analysis and especially sensitivity analysis are used. The other issue solved in this work is detection of economic efficiency of the referential project. The output is based on the prediction of the critical factors.
24
Račanský, Jan. "Rozhodování o poskytovatelicloudových služeb s ohledem na bezpečnost dat." Master's thesis, Vysoká škola ekonomická v Praze, 2014. http://www.nusl.cz/ntk/nusl-203893.
Full textAbstract:
Organizations that during the past years become accustomed to run its services on its on-premise solution, have increasingly to decide if they will in these days continue to operate their IT services in this way, or take advantage of new opportunities for cloud-based solution. However, the transition to this new technology, which entrusts their data into the hands of external companies, accompanied by a fear of security of their sensitive data. The main objective of this thesis is to propose a reference model that will assist organizations in their selection process of cloud service providers with respect to data security. In conclusion the quality and usefulness of this reference model is validated by knowledge and information, which are obtained during interviews with IT specialists.
25
Slavík, Jiří. "Modelování umělého života." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2007. http://www.nusl.cz/ntk/nusl-412757.
Full textAbstract:
Artificial life modelling is an extensive subject to exert effort in one piece of work such as this work. For that reason this work is limited to keep the base line of modelling of human behavior. Presented work deal with a creation of an artificial agent whose human-like behavior is implemented according to the PECS reference model. Specification of the PECS reference model is implemented in Java to build a simulation of artificial human being in some environment. Modeled human being has been assigned to imitate human activities, react adequately to sensed events from the environment and change the environment to achieve its goals. Modeled human being is a behavior controled entity acting according to its current role.
26
Jílek, Petr. "Possibilities for PPP in the Czech Republic." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-11924.
Full textAbstract:
Government of Czech republic approved in May this year concession project in two pilot PPP projects, which opens up new possibilities of implementation and the provision of costly public goods in the Czech Republic. In his thesis, I will refer to the use of methods of public-private partnerships in the implementation of individual projects in the Czech Republic. In the theoretical description for the situation it is appropriate to this method (including the exact type) to use as a stage where it is better to use the method of procurement. Furthermore, I will give a legislative framework of PPP projects in EU countries and selected non-member countries. The practical part is focus on specific PPP projects that are in the Czech Republic are beginning to realize and I assess their risks, advantages and disadvantages in comparison with the already carried out projects in abroad and it is not convenient to deal with such projects through public-private partnerships. The aim of this thesis is to clarify the existing conditions of the possible impact on use of the PPP
27
Jehličková, Anna. "Potenciál zapojení celebrit v marketingové komunikaci vybrané kategorie produktů." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-114346.
Full textAbstract:
The aim of this thesis is to determine whether the involvement of a celebrity in advertising is the right choice and also make recommendation for selecting the appropriate celebrity in advertising beer, more precisely, three specific brands (Pilsner Urquell, Krušovice and Staropramen). In the thesis I explain the basic characteristics of consumer behavior, reference groups, marketing communication, celebrities and marketing research. The application part focuses on the beer market in the Czech Republic and the brewing in 2010, further I pursue my own selection of brands of beers and I state a brief characteristic of both particular beers and businesses. I continue the content analysis and the analysis of my own research, whose main objective is to select particular celebrities for selected brands of beer, on the basis of characteristics and features of celebrities, which should correspond to the image of each brand.
28
Obšilová, Lucie. "Měření malých stejnosměrných napětí." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221185.
Full textAbstract:
This thesis deals with low level DC voltage measurement by three methods. First part of this thesis describes each method. It is about potentiometric method, reference step method and direct method. This thesis also describes Josephson voltage standard which was used for calibration nanovoltmeter and Zener reference. The theoretical part of this thesis also deals with the evaluation of key comparison data. The main goal of this thesis is the comparison of methods used to measure low level DC voltage. The practical part of the thesis deals with the implementation of measurement with all methods in cooperation with Czech metrology institute. The measured values are processed including uncertainty evaluations. The final part of this thesis focuses on comparison of measurement methods. The key comparison reference value and the degree of equivalence of the measurement of each method are determined. Next part of comparison consisted of graphic comparison of methods. The end of the thesis contains evaluation of the achieved results.
29
Uhrynová, Iva. "Využití celebrit v mediální marketingové komunikaci." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-75215.
Full textAbstract:
Main purpose of this thesis is to bring a reader into the problem of celebrity involvement in media marketing communication. In the thesis I explain the basic terms of celebrity marketing, consumer behavior, reference groups, marketing communication and celebrity endorsement. The application part focuses on my own research concerning the attitude of the Czech population sample to the advertisements with celebrities.
30
Bábek, Tomáš. "Automatizace měření Zenerových referencí." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219317.
Full textAbstract:
This thesis deals with metrology specialized to DC voltage. In the begining of thesis is explanation of technical terms from metrology, summarization of units from International System and explanation of the standards and its kinds in the context of metrology. Primary standards of DC voltage based on Zener diodes and Josephson effect are described as well. In cooperation with Czech metrology institute in Brno this work is focused on automatization of measuring Zener reference standards (ZRS). Goal of this project is to automatize the measuring of Zener reference standards and its relationship with Josephson voltage system using scanner. To do this, there is a need to find out offsets, that can develop on scanner's channels. There is a theoretical analysis of measuring made on the scanner and their uncertainties. Aim of the solution is computation of scanner channels offsets using everyday automatic measuring the system of Zener reference standards (ZRS). For measuring the LabView was used and for computing the data from measured values the Matlab was used. This thesis should short the time needed when measuring DC voltage references, measure values of DC voltage standards and set the scanner channels offsets. In the end there is a summarization of offsets measured on individual scanner channels.
31
Relovský, Josef. "Zjištění fyzické pozice počítače v Internetu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217301.
Full textAbstract:
This master‘s thesis is formed as a part of the research project for whose analyse is used the worldwide experimental network called PlanetLab. The whole dilemma is engaged by IPTV technology. IPTV is a protocol that makes possible transfer data of a television content over the Internet to the end user. In the IPTV technology the server is a source. These data are presented as a video and audio signal (streem) which are required to deliver to the end users. Some structure, which presents alternate these computers´connection, has been established, because the technology making use of the big pretention is used. The most patent way between the source and the destination is found. My objective is design this structure in the pursuit. The principle of the signal ramification from one node to several nodes (in group) is called multicast. Rather said from one node to the set of nodes. In the IPTV is presented each one single program for one multicast group. The concrete end users (recipients) are members of one or several obtainable multicast groups. The switch between programs demands a change from one multicast group to other group. For an analyse is used the worldwide experimental network called PlanetLab. This network was created after the floatation of three American´s universities in 2002. Nowadays it takes in more than 800 nodes which are distributed over the world. The PlanetLab is used by multinational company such as the Intel or the Hewlett-Packard. It is created for the testing and the scientific scope. I make the scripts in the Linux for the formation of the interconnecting structure. The main item by the course of the unreeling is response time. I investigate it with a command called “ping”. Everything is created in the Linux because all nodes use the operation system Linux in PlanetLab. By the help of the command “ping” I take the active nodes and response times. According to the response time I make a distance vectors which are used for the finding a location in the face of the references points which were determined before. According to the similarity of these vectors is designated to what end point is put to the point.
32
Jabůrek, Tomáš. "Trendy v retail bankovnictví a jejich dopad na IT architekturu banky." Master's thesis, Vysoká škola ekonomická v Praze, 2015. http://www.nusl.cz/ntk/nusl-201096.
Full textAbstract:
The theme of this thesis are trends in retail banking and their impact on bank's IT architecture. The history teaches us that the ability to catch trends quickly and to use them can bring significant competitive advantage. At the same time some trends may pose a threat to the company and their (trends) early detection may prevent later problems. It is therefore important to monitor trends and evaluate their impact on bank's business. Roughly half of the overall bank costs consists of IT costs which are determined by IT architecture of the bank. Bank's IT is defined by IT architecture so it is useful to consider examining the impact of trends to the IT architecture. The aim of this thesis is to identify impact of trends in retail banking on bank's IT architecture. In the first part I analyze trends in retail banking in order to find out which are the key. In the next section I compare different reference IT architectures. Subsequently at the most appropriate architecture I identify impact of trends in retail banking on bank's IT architecture. Banks that perceive trends mentioned in this thesis as important and at the same time have similar architecture which I describe in this thesis may use my findings to gain competitive advantage or to take measures necessary to mitigate risks which are connected with coming trends which can have a negative impact on banks.
33
Šenkýř, Miroslav. "Návrh referenčních modelů kluzáku L23 Blaník." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230749.
Full textAbstract:
The aim of this diploma thesis is to create useful reference models of the glider L-23 Super Blaník and their use for framework proposal technology of production, which will improve accuracy and reduce labor intensity of production. The introduction of the thesis describes history of glider and historical overview of geometry transmission in terms of structure. The next chapter of the thesis deals with the description of reference models and rules of their creation. Section describing coordinate systems is closely linked with the previous chapter. Another section of thesis is dedicated to the importance of reference models in the product lifecycle. The creation and tuning of reference models of glider is described in the next chapter of thesis. The penultimate chapter deals with experiment, which allowed verification of reference model and product. The conclusion of the thesis describes proposed technology of production where used verified reference models and modern tools of CAD systems refine and facilitate production. The main objective in designing of reference models was the definition of high quality and usable surfaces. Also proposal technology of production was processed in order to ensure the improvement and simplification of manufacturing process.
34
Ambrozková, Anna. "Geometrické struktury a objekty z hlediska aplikací v mechanice." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417093.
Full textAbstract:
This Master's thesis relates to continuum mechanics and its connection with selected directions of modern differential geometry, which deal with geometric structures and objects. These are mainly tensors, bundles, varieties and jets. The first part is devoted to the mechanics of the continuum itself and its description in several areas, others deal with mathematical concepts and their possible application in mechanics.
35
Maceček, Ivo. "Datová fúze satelitní navigace a kompasu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218308.
Full textAbstract:
Theoretical information about different satellite navigation systems used for determination of position. Special attention is attended to system GPS. There are consulted main principles of the GPS and some error sources. Application of differential GPS for minimization of these errors is discussed. Next part is about examples of basic principles for measuring earth magnetic field. Last chaps are about practical realization of mentioned DGPS, which is applied for outdoor mobile robot navigation. There is described hardware structure, software utilities and application of an aided tool for GPS - electronic compass. Some practical measurements and results are presented.
36
Szkandera, Jan. "TSQL2 interpret nad post-relačními databázemi v Oracle Database." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-236923.
Full textAbstract:
This thesis focuses on temporal databases and their multimedia and spatial extensions. The introduction of this work summarizes results in the area of research of temporal databases - key concepts of a TSQL2 language and post-relational extension of Oracle database are introduced. Main part of the thesis is design of an interpreter as a layer between user application and relational database. In the next part of the thesis control of integrity constraints in temporal databases are discussed. Result of this work is functional interpreter of TSQL2 language able to store post-relational data.
37
Al, Khaddour Samer. "Fracture Behaviour of Steels and Their Welds for Power Industry." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-263409.
Full textAbstract:
Práce byla zaměřena na ověření platnosti koncepce master křivky pro hodnocení heterogenních svarových spojů, resp. teplotně stárnutých svarů. Současně bylo cílem disertace vyvinout kvantitativní model pro predikci referenční teploty lokalizující tranzitní oblast na teplotní ose za použití dat získaných z tahové zkoušky, a to za použití metody umělých neuronových sítí. Studie je současně zaměřena na heterogenní svarový spoj připravený tavným svařováním. Je zacílena na hodnocení lomového chování v tranzitní oblasti nejméně odolné části svaru, tj. tepelně ovlivněné zóny ferritické oceli v blízkosti zóny natavení s vysokolegovaným materiálem. Pro predikci referenční teploty master křivky je použita zmíněná metoda neuronových sítí, a to za použití dat z tahových zkoušek a měření tvrdosti. Predikovaná referenční teplota byla ověřována na základě výsledku experimentálních měření. Vytvoření modelu za použití neuronových sítí vyžaduje dostatečné množství dat a není vždy snadno tuto podmínku splnit. V případě sledovaného problému to znamenalo použití dat z dostatečně věrohodných zdrojů (skupiny Křehký lom ÚFM AVČR) a se známou metalurgickou historií. Smysl práce je tak možno spatřovat ve vývoji modelu neuronové sítě, která bude dostatečně přesně predikovat referenční teplotu. Celkově byla pro tyto účely použita data z 29 nízkolegovaných ocelí. Pro účely vývoje byly použity kromě hladkých zkušebních tyčí, rovněž tahové zkoušky s obvodovým vrubem testované při kritické teplotě křehkosti (mez makroplastických deformací) a při teplotě pokojové. Při tvorbě modelu byla postupně v různých kombinacích využita všechna data z uvedených zkoušek. Studie ukázala, že referenční teplota charakterizující tranzitní chování lomové houževnatosti oceli s převažující feritickou strukturou je jedinečným parametrem predikovatelným na základě vybraných charakteristik tahových zkoušek.
38
Ambrožová, Zuzana. "Is Gamekeeping in the Czech Republic an Institutionalized Form of Poaching?" Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-75686.
Full textAbstract:
This paper aims at unveiling the true nature of the Czech hunting Act by modeling the competition for property rights characteristics among gamekeepers, the subsidized group, and other users of land based resources, the taxed group. We show that the subsidized gamekeepers' group seeking to decrease public opposition tries to obfuscate the true goal of its profit-oriented efforts by supporting relatively less revealing technically imperfect institutions. It does so by advertising artificially created qualities such as tradition and public interest. What hunters try to achieve technically is to shift the reference points of desire of the other users of land-based resources in order to disable them from perceiving total policy costs. As a result taxpayers' intrinsic advantage is undermined, and contrary to the efficient redistribution hypothesis a Pareto-inferior outcome is reached. Moreover taking full account of all costs of rent-seeking, including incomplete externality internalization, institutional rigidity and created moral hazard, total social costs, connected with the outcome of competition for property rights, are not minimized. Regarding empirical testing of the theoretical propositions, analyzing hunting statistics we prove that whereas the acknowledged public goals are not met, the technically imperfect Act 449/2001 Coll. creates moral hazard in favor of gamekeepers' private interests.
39
Malý, Jan. "Řízení ECM v rámci modelu řízení podnikové informatiky MBI." Master's thesis, Vysoká škola ekonomická v Praze, 2014. http://www.nusl.cz/ntk/nusl-192430.
Full textAbstract:
The thesis is focused on ECM and its representation in the reference model of IT management MBI. The main objective is to extend the aforementioned model with objects associated with the ECM - factors describing the structure of solutions, tasks defining the procedure for its implementation and the links between them and existing objects. The thesis analyzes in detail the benefits, but also the risks and problems associated with solution implementation. The methodology provides a set of best practices for the implementation of ECM.
40
Hübner, Michal. "Vytvoření referenčního modelu pro mapování metodik řízení projektů." Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-199255.
Full textAbstract:
The diploma thesis deals with IS/ICT project management. The aim of this diploma thesis is to create a reference model of project management that can be mapped on to another project management methodology. To verify the reference model map to other methodology in this work is defined tool for mapping methodologies. The reference model in this diploma thesis is mapped to the four selected methodology which was subsequently used in the mapping of three selected companies.
41
Kocina, Karel. "Studie návrhu vhodného tvaru membránových konstrukcí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225357.
Full textAbstract:
This diploma thesis deals with methods for design of membrane structure shape. Main purpose is to analyze topology designs by Formfinder and Rhinoceros in RFEM and compare results. Test a possibility of designing shape by software RFEM.
42
Sedlák, Luboš. "Senzorický systém robotu Minidarpa." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218314.
Full textAbstract:
This master’s thesis describes a sensorial subsystem of a mobile robot. The thesis mentions the structure and a basis of the satellite navigation. There are also described each systems and visualization techniques as e. g. WGS 84, including also other systems for specification of more accurate position on the Earth (EGNOS, WAAS and others). This thesis describes closely also a differential GPS and the corrections. For the purposes of the thesis there has been assembled GPS software for a fundamental and a remote station. There have been chosen and used modules for receiving a GPS signal and wireless modules for their communication. There are also used outcomes from the project of the Open Street Map in the thesis. Results of this project are described in details, decoded, adjusted and converted into RNDF file. At the end of this thesis there has been composed a function of the program for portable camera which works on principle time of flight. This portable camera is dedicated to look for immediate barrier and also for 3D space view in front of the robot. This thesis also including the process how the power source has been built up for this portable scanner.
43
Friedrich, Tomáš. "Komprese DNA sekvencí." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-237222.
Full textAbstract:
The increasing volume of biological data requires finding new ways to save these data in genetic banks. The target of this work is design and implementation of a novel algorithm for compression of DNA sequences. The algorithm is based on aligning DNA sequences agains a reference sequence and storing only diferencies between sequence and reference model. The work contains basic prerequisities from molecular biology which are needed for understanding of algorithm details. Next aligment algorithms and common compress schemes suitable for storing of diferencies agains reference sequence are described. The work continues with a description of implementation, which is follewed by derivation of time and space complexity and comparison with common compression algorithms. Further continuation of this thesis is discussed in conclusion.
44
Barilíková, Lujza. "Zpracování unikátních molekulárních indexů bez mapování k referenčnímu genomu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413015.
Full textAbstract:
Hlavným cieľom tejto práce je návrh nového algoritmu k spracovaniu unikátnych molekulárnych indexov bez mapovania na referenčný genóm. O tieto náhodné oligonukleotidové sekvencie neustále vzrastá záujem, pretože uľahčujú rozpoznávať PCR chyby a skresľovanie údajov. Keďže používanie technológií sekvenovania novej generácie neustále rastie, je vynaložené veľké úsilie vyvíjať nástroje pre analýzu produkovaných dát. V súčasnosti sú nástroje na riešenie týchto chýb relatívne časovo náročné a zložité z dôvodu výpočtovo náročného zarovnania. Najdôležitejšie obmedzenie týchto nástrojov spočíva v skutočnosti, že pri spracovávaní duplikátov sú povolené multi-mapované čítania. Tieto čítania sú zvyčajne ignorované, čo môže viesť k zníženiu kvantitatívnej presnosti a spôsobiť zavádzajúcu interpretáciu výsledkov daného sekvenovania. V snahe vyriešiť tento problém je v tejto práci uvedený nový prístup, ktorý umožňuje odhad absolútneho počtu jedinečných molekúl s relatívne rýchlym a spoľahlivým spôsobom.
45
Šimek, Milan. "Výběr referenčních uzlů pro bezkotevní lokalizační techniky v bezdrátových senzorových sítích." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-233511.
Full textAbstract:
Dizertační práce se zabývá návrhem nového bezkotevního lokalizačního algoritmu sloužícího pro výpočet pozice uzlů v bezdrátových senzorových sítích. Provedené studie ukázaly, že dosavadní bezkotevní lokalizační algoritmy, pracující v paralelním režimu, dosahují malých lokalizačních chyb. Jejich nevýhodou ovšem je, že při sestavení množiny referenčních uzlu spotřebovávají daleko větší množství energie než algoritmy pracující v inkrementálním režimu. Paralelní lokalizační algoritmy využívají pro určení pozice referenční uzly nacházející se na protilehlých hranách bezdrátové sítě. Nový lokalizační algoritmus označený jako BRL (Boundary Recognition aided Localization) je založen na myšlence decentralizovaně detekovat uzly ležící na hranici síti a pouze z této množiny vybrat potřebný počet referenčních uzlu. Pomocí navrženého přístupu lze znažně snížit množství energie spotřebované v průběhu procesu výběru referenčních uzlů v senzorovém poli. Dalším přínosem ke snížení energetických nároku a zároveň zachování nízké lokalizační chyby je využití procesu multilaterace se třemi, eventuálně čtyřmi referenčními body. V rámci práce byly provedeny simulace několika dílčích algoritmu a jejich funkčnost byla ověřena experimentálně v reálné senzorové síti. Navržený algoritmus BRL byl porovnán z hlediska lokalizační chyby a počtu zpracovaných paketů s několika známými lokalizačními algoritmy. Výsledky simulací dokázaly, že navržený algoritmus představuje efektivní řešení pro přesnou a zároveň nízkoenergetickou lokalizaci uzlů v bezdrátových senzorových sítích.
46
Klouček, Ondřej. "Finanční řízení podniku v modelu řízení podnikové informatiky MBI." Master's thesis, Vysoká škola ekonomická v Praze, 2014. http://www.nusl.cz/ntk/nusl-193222.
Full textAbstract:
This diploma thesis focuses on two individual tasks in the MBI model (Management Business of Informatics). Analyzed tasks come under the section of Business Information System, specifically under the Business Financial Management group of tasks. The tasks deal with financial analysis, financial planning and budgets. The aim of the thesis is to create these tasks sufficiently detailed for the MBI model including detailed elaboration of the key activities and linkages to the existing MBI environment. The theoretical part consists of analysis of information sources. The practical part is based on these theoretical findings, which are grouped into logical units and, based on the assessment of the current state, remodeled into the form compliant with the MBI rules. The author of the thesis contributed to this research subject with creating the above mentioned tasks, including detailed key activities and with analysis and the blueprint of the linkages of the newly created tasks to the existing content of MBI in order to ensure effective work with the model for the users. Model documents and templates for calculations have been created for some of the tasks. The first part of the thesis theoretically describes the research subject with a focus on the systems of source information for the analyzed tasks. Based on this theoretical part, the practical part contains the commented version of tasks for the MBI model including the linkages for other methodical objects and contingent model materials.
47
Mudroch, Michal. "Návrh nízkonapěťového napájecího a referenčního bloku založeného na teplotně stabilní napěťové referenci." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399479.
Full textAbstract:
In this diploma thesis there is elaborated design of low-voltage power supply block using I3T25 technology. The theoretical part describes the basic structures used in the design, using CMOS and bipolar devices. Furthermore, the properties and the analysis used in the evaluation are described. In the design part there is an elaborated design of individual parts, including voltage references, current references, DAC converter, operational amplifier. In the last part, the power supply block is subjected to simulations for verification of temperature compensated output variables and analyzed circuit functionality.
48
Grepl, Miroslav. "MAC řízení přístupu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217509.
Full textAbstract:
This master's thesis describes the problems of SELinux, and the methods of creation of a proper security policy with a focus on the SELinux reference policy and its mechanisms. It designs the methodics of formulation of specific security rules, supplemented with the practical example of its application. Furthermore, it describes the available security rules commonly used for http, ftp and ssh services securing, their modification and practical utilization. According to the proposed methodology, these services are protected with their own security rules and both security methods are mutually compared and evaluated.
49
Hrabě, Pavel. "Koncepce podnikové architektury pro reformu veřejné správy ČR." Doctoral thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-200022.
Full textAbstract:
The subject of the dissertation is exploring the use of enterprise architecture as a managerial method to support the transformation (reform) of Czech public administration. The dissertation shows that enterprise architecture is in the public sector of Czech Republic still not used, even though public sector organizations want to continue improving its services and management in a way where enterprise architecture could be beneficial. The thesis aims to understand the needs of public authorities towards the possibilities and benefits of enterprise architecture and propose such a customization that could increase the adoption and use of enterprise architecture by these organizations. The main objective of thesis is to summarize individual partial results of author's research into the design of overall Concept of the structure and procedure of implementation of National Public Administration Architecture of Czech Republic. Research within the dissertation combines two basic research methods. Both represent qualitative research methods, suitable for the development of new methods and artefacts (Design Science Research) and for proof the hypotheses and outputs (Case Studies). To create preconditions of the proposed concept was necessary to verify the status of the Czech public administration from the perspective of current rate, needs and interest for the use of enterprise architecture to support the reform of public administration. To verify the status of environment and the needs served basic research questions, further elaborated into detailed questions of multiple case study. In the analytical part of the thesis are summarized significant findings the analysis of information resources and literature in the areas of a) the definition of enterprise architecture, its position, role and development trends for design changes in the structure and metamodel of TOGAF framework, b) the existence of available models and key design principles of application architecture reference model and c) experience of the implementation and use of enterprise architecture for public administration reform. The main part of the thesis focuses on the proposals in three areas. In the first part are designed theoretical and practical changes in the definition, structure and metamodel of enterprise architecture to better support its application for real reform of public administration, not only to improve the management of IT. Presented proposals are in the same time providing solutions to some identified discrepancies in the trends of development of enterprise architecture. General proposals are in parallel applied as changes in the standard TOGAF, which is then recommended as the initial framework for the National Public Administration Architecture of the Czech Republic. In the second part of the proposals are presented principles and content of the reference model of application architecture. This is an example the accelerator necessary to solve the discrepancy between the scope of enterprise architecture and its feasibility with limited resources. The thesis emphasize the industry adjusted model for public administration and its application in a hierarchical, fractal environments typical of public administration. In the third part are presented key components of the overall concept, using as well as previous research results of this thesis. As the key elements are presented proposal for the structure of National Public Administration Architecture of the Czech Republic environment, proposal for the procedure of implementation of National Architecture and the proposal of products (outputs) for deploying National Architecture in Czech Republic. Additionally are formulated proposals of ways of using National Architecture in Czech public administration and conditions and prerequisites for introduction of National Architecture in the Czech public administration.
50
Pichová, Lenka. "Tepelné chování a energetická náročnost nízkoenergetické administrativní budovy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226849.
Full textAbstract:
The thesis deals with energy intensity of a low energy office building. In the thesis, em-phasis is put especially on the calculation of energy consumption for heating (cooling). The energy intensity of the building is determined and evaluated by four methods of calculation, which are compared with a valid certificate of energy performance of the building, which arose at the time of its construction. In the experimental part of the the-sis, the energy intensity of the building is compared to the actual energy consumption obtained by two experimental measurements in heating season 2012/2013. (The building is operating partly only). Different methods of solutions and valid legal regulations are elaborated in detail in the first part of the thesis.