Academic literature on the topic 'Relay-Based Control'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Relay-Based Control.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Relay-Based Control"

1

Lúcia Nogueira dos Reis, Laurinda, Antonio Augusto Rodrigues Coelho, Otacílio da Mota Almeida, and Rômulo Nunes Almeida. "Modeling And Control Of Switched Reluctance Motor Drives Based On Setpoint Relay." Eletrônica de Potência 13, no. 3 (2008): 163–70. http://dx.doi.org/10.18618/rep.2008.3.163170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tjandi, Yunus, Zulhajji Zulhajji, and Syarifuddin Kasim. "Laboratory Control and Monitor Device Based on Relay With Raspberry." Indonesian Journal of Fundamental Sciences 8, no. 1 (2022): 66. http://dx.doi.org/10.26858/ijfs.v8i1.33170.

Full text
Abstract:
Abstract. Observe in the Laboratory for student requires comfortable and safe conditions. Realize this, we need a control and monitor device to secure electrical device inside of laboratory. This research aims to : (1) Build software laboratory control and monitor based on relay with raspberry to bridle electrical devices in the laboratory or office using smartphone, (2) Build laboratory control and monitor device based on relay with created software, (3) Build an interface and application of laboratory control and monitor based on relay with smartphone to bridle electrical devices in the labo
APA, Harvard, Vancouver, ISO, and other styles
3

Tjandi, Yunus, and Syarifuddin Kasim. "Electric Control Equipment Based on Arduino Relay." Journal of Physics: Conference Series 1244 (June 2019): 012028. http://dx.doi.org/10.1088/1742-6596/1244/1/012028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Hao, Xiu Zhong Li, Wei Yang, Xiao Chu Liu, and Quan Peng He. "Design and Experimental Research of Automatic Control System of Material Transport Car Based on Siemens S7-300 PLC." Applied Mechanics and Materials 703 (December 2014): 277–80. http://dx.doi.org/10.4028/www.scientific.net/amm.703.277.

Full text
Abstract:
Aiming to the problem of the traditional relay control system, such as high failure rate, low precision control, complex installation, slow system response, etc ,which caused by the extensive uses of intermediate relay, time relay, counter and other devices in the system, this paper provides a design of an automatic control system which integrates automatic positioning, automatic feeding, automatic cleaning equipment based on siemens S7-300 PLC instead of the traditional relay control system and carry out simulation analysis by PLCSIM software, compared with the material transport car model mo
APA, Harvard, Vancouver, ISO, and other styles
5

Mazukha, N. A. "Use of new generation relay in the control scheme of grain thrower." Traktory i sel hozmashiny 83, no. 1 (2016): 20–22. http://dx.doi.org/10.17816/0321-4443-66126.

Full text
Abstract:
The paper presents a protection scheme for electric motors of grain thrower, based on multifunctional relay for control of open-phase modes of supply network and on isolation of circuits to which the relay is connected. The paper also proposes the use of single-phase relay of current control with regulated time-lag for energy saving.
APA, Harvard, Vancouver, ISO, and other styles
6

Choi, Dae H., Byoung H. Jung, and Dan K. Sung. "Energy-aware path planning of an unmanned aerial vehicle acting as a communication relay for mobile ground nodes." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 233, no. 3 (2018): 1124–32. http://dx.doi.org/10.1177/0954410017748685.

Full text
Abstract:
We focus on energy-aware path planning of a small unmanned aerial vehicle-based relay which forwards the data received from a stationary remote station to a mobile access point. In order to reduce the communication power required for reliable communication between the unmanned aerial vehicle-based relay and access point, the unmanned aerial vehicle-based relay keeps track of the access point within a maximum allowable horizontal distance at a constant altitude, and thus the communication power of the unmanned aerial vehicle-based relay decreases as the horizontal distance decreases. In order t
APA, Harvard, Vancouver, ISO, and other styles
7

Suchendra, Devie Ryana, Dewi Putri Suryani, and Muhammad Ikhsan Sani. "Home Lighting Control Based on Time Scheduling using Crontab." IJAIT (International Journal of Applied Information Technology) 2, no. 01 (2018): 1. http://dx.doi.org/10.25124/ijait.v2i01.924.

Full text
Abstract:
Access control system in smart home concept is a support system that affects especially on controlling the electronic devices. Along with advances in technology, the conventional access control system was developed into an electronic-based access control system. A conventional access control system such as manual electric switches is now beginning to be developed with an electric switch that can be controlled wirelessly from the web. Raspberry pi 2 model B is one of the minicomputers which can be used in an automatic access control system. By using GPIO (General Purpose Input Output) on Raspbe
APA, Harvard, Vancouver, ISO, and other styles
8

Hu, Yidan. "Optimal Power Quality Control Model of Magnetic Latching Relay for Charging Station Based on Adaline." Journal of Nanoelectronics and Optoelectronics 18, no. 5 (2023): 639–45. http://dx.doi.org/10.1166/jno.2023.3420.

Full text
Abstract:
In order to eliminate the internal harmonics of the magnetic latching relay caused by the load input, an ADALINE-based magnetic latching relay power quality optimal control model for charging stations was constructed. Calculate the sampling point of the input signal through the ADALINE neural network, obtain the error signal between the input signal and the measured signal, use the VSLMS algorithm to continuously adjust the weight value to update the spectrum in real time, detect the harmonics existing in the magnetic latching relay, and use the harmonics. The droop control strategy calculates
APA, Harvard, Vancouver, ISO, and other styles
9

Tapase, Pratham, Saif Khan, Kaif Khan, Prashant Landge, Yash Sonawane, and Siddhesh Desai. "Arduino-Based Precise Heating System." International Journal for Research in Applied Science and Engineering Technology 13, no. 4 (2025): 437–41. https://doi.org/10.22214/ijraset.2025.68256.

Full text
Abstract:
Abstract: The present work is aimed at the design and implementation of an Arduino-based heating system that utilizes a temperature sensor and relay for precise temperature regulation. The Arduino processes real-time data from the temperature sensor and controls the relay to manage the heating element, ensuring stable temperature maintenance. Pulse Width Modulation (PWM) is employed to optimize energy efficiency by minimizing temperature fluctuations and improving system stability, offering a more refined control compared to simple on/off mechanisms. The relay provides electrical isolation bet
APA, Harvard, Vancouver, ISO, and other styles
10

Kubkina, O. V., and V. G. Lysenko. "Automation of ac electric-traction NetWare digital protective relay operational control." Journal of Physics: Conference Series 2131, no. 4 (2021): 042066. http://dx.doi.org/10.1088/1742-6596/2131/4/042066.

Full text
Abstract:
Abstract The widespread use of microprocessor-based digital protective relay from various manufacturers, the expansion of the programmable protective relay terminals’ functional composition, the lack of hardware, software and algorithmic support unification, problems of electromagnetic protection necessitate consideration of the issues of digital protective relay operational control automation [1-3]. The authors believe that the attention paid by operating services to the means and methods of the AC electric-traction netware protective relay Functional check is insufficient. Monitoring the cor
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Relay-Based Control"

1

Jiang, Peng. "Cooperative control of relay based cellular networks." Thesis, Queen Mary, University of London, 2009. http://qmro.qmul.ac.uk/xmlui/handle/123456789/577.

Full text
Abstract:
The increasing popularity of wireless communications and the higher data requirements of new types of service lead to higher demands on wireless networks. Relay based cellular networks have been seen as an effective way to meet users’ increased data rate requirements while still retaining the benefits of a cellular structure. However, maximizing the probability of providing service and spectrum efficiency are still major challenges for network operators and engineers because of the heterogeneous traffic demands, hard-to-predict user movements and complex traffic models. In a mobile network, lo
APA, Harvard, Vancouver, ISO, and other styles
2

Kaya, Ibrahim. "Relay feedback identification and model based controller design." Thesis, University of Sussex, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299955.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wu, Victor Kai Yuen. "OFDM-based cooperative communications in a single path relay network and a multiple path relay network." Thesis, Available online, Georgia Institute of Technology, 2006, 2006. http://etd.gatech.edu/theses/available/etd-11092006-152421/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

謝政霖. "Max-Min SINR Based Power Control in Cognitive Radio and Relay Systems." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/86258766780092676260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Zejian. "Advanced microprocessor based intelligent relay for multifunction protection system." Thesis, 1995. https://vuir.vu.edu.au/15317/.

Full text
Abstract:
Protective relay constantly monitors the power to assure maximum continuity of electrical service with minimum damage to life and property. Thus, they are on guard throughout - from the generation, through transmission, into distribution and utilisation. They are found in large and small systems, in the power companies and in most industrial installations. This wide usage, with high demands for reliable operation, has created a continuing desire for additional tasking. In power protection field, there have been many cases where protection theories and techniques have played an important role
APA, Harvard, Vancouver, ISO, and other styles
6

Wu, Chi-Yuan, and 吳其遠. "Fairness and QoS Guarantees of Mobile Multi-hop Relay Networks Based on Cross-layer Fuzzy Control." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/09909578519306791363.

Full text
Abstract:
碩士<br>國立成功大學<br>資訊工程學系碩博士班<br>96<br>Fairness and quality of service (QoS) are the most important issues for broadband wireless access networks since for various users in different environment guaranteeing diverse QoS and fairness at the same time is necessary. IEEE 802.16 (WiMAX) is the most popular standard for broadband wireless access networks, among which IEEE 802.16j multi-hop relay is an amendment to enhance coverage and throughput of IEEE 802.16e mobile WiMAX by introducing multi-hop relay capacities. Multi-hop relay can improve the performance for subscriber stations near the edge of t
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Ta-Po, and 陳柏達. "A Multiple Relay-Based Medium Access Control Protocol in Multirate Wireless Ad Hoc Networks with Multiple Beam Antennas." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/88468115281447542519.

Full text
Abstract:
碩士<br>國立中正大學<br>資訊工程所<br>95<br>Multiple beam antennas can be used to enhance the throughput of wireless networks by increasing spatial reuse, avoiding co-channel interference, and reducing collisions. The application of multiple beam antennas is similar to the concept of Space Division Multiple Access (SDMA), hence each beam can treat as a data channel. Moreover, wireless networks can increase the total throughput and decrease transmission latency if the physical layer supports multirate capability. However, multirate wireless networks may bring the anomaly problem. The anomaly problem is incu
APA, Harvard, Vancouver, ISO, and other styles
8

Senapati, Sambit Kumar, A. V. Jay Krishna, and Kumar Rohit. "Development of microcontroller based over-current relay controls." Thesis, 2014. http://ethesis.nitrkl.ac.in/6129/1/110EE0228-6.pdf.

Full text
Abstract:
This Project is about designing the controls of an Overcurrent relay using microcontroller. Relay is an electrical switch. Generally it operates on electromagnetic principle for switching action. Over current (OC) relay is a type of relay which performs its switching action based on an input current to it. When the input current exceeds a particular pick up value the relay operates. Microcontroller based relays are gaining popularity as these have no mechanical contacts. These can operate at very high speeds. Any kind of characteristics can be obtained by using these. In a typical microcontrol
APA, Harvard, Vancouver, ISO, and other styles
9

Kumar, Mukesh, and Sambit Dash. "Relay based traffic contol system using infrared pair detectors." Thesis, 2012. http://ethesis.nitrkl.ac.in/3836/2/FINAL_DOC.pdf.

Full text
Abstract:
A relay is an electromechanical device that is actuated by an electrical current. The small current flowing in relay circuit causes the opening or closing of high power requiring circuit. The proposed traffic control system in this project will be a simple relay based controller system which can adapt according to the amount of traffic in one direction. The relay will require only small amount of current for its operation but will be used to operate high power requiring traffic lights. Also relay switching will be used to operate more number of components with the same port. The system will r
APA, Harvard, Vancouver, ISO, and other styles
10

Gunasekera, Srilal. "Design and Development of Protection, Control and SCADA of Model Zone Substation Laboratory Based on The IEC61850 Communication Standard." Thesis, 2017. https://vuir.vu.edu.au/40051/.

Full text
Abstract:
Introduction of IEC61850 standard for substation automation has envisaged higher efficiencies and reliability in operation of energy management systems (EMS). However, despite its benefits, utility companies are hesitant to adopt and integrate IEC61850 standard because of lack of knowledge and skills among engineers in power supply industry. Under this circumstance Victoria University has been a pioneer to model Victoria University Zone Substation Automation System based on IEC61850 standard which can be a test bench and training facility for people from industry and students in academic. Basi
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Relay-Based Control"

1

Liu, Tao, and Furong Gao. Industrial Process Identification and Control Design: Step-Test and Relay-experiment-based Methods. Springer London, Limited, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Tao, and Furong Gao. Industrial Process Identification and Control Design: Step-Test and Relay-Experiment-Based Methods. Springer London, Limited, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Relay-Based Control"

1

Gustafson, Robert J., and and Mark T. Morgan. "RELAY-BASED CONTROL SYSTEMS." In Fundamentals of Electricity for Agriculture, 3rd Edition. American Society of Agricultural and Biological Engineers, 2004. http://dx.doi.org/10.13031/2013.17769.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Scali, Claudio, and Maurizio Rossi. "A Relay-based Technique for Detection of Stiction." In Detection and Diagnosis of Stiction in Control Loops. Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-775-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Simhachalam, D., S. Talukder, and R. K. Mudi. "Relay Feedback Based Improved Critical Point Estimation for Process Control Systems." In Communications in Computer and Information Science. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25734-6_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kapileswar, N., and P. Phani Kumar. "Energy-Efficient Reliable Communication Routing Using Forward Relay Selection Algorithm for IoT-Based Underwater Networks." In IoT Based Control Networks and Intelligent Systems. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-6586-1_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pu, Donglin, Jianhua Wu, Zhenhua Xiong, Xinjun Sheng, and Han Ding. "Nonlinear Analysis and Application of Servo Control System Based on Relay Feedback." In Intelligent Robotics and Applications. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-10817-4_75.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Umadevi, K. S., and Arunkumar Thangavelu. "Link Quality-Based Multi-hop Relay Protocol for WiMedia Medium Access Control." In Advances in Intelligent Systems and Computing. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0419-3_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhou, Yang, Xin Jun Xu, Tai Ping Feng, Wei Tu, and Xiang Qiong Liu. "Development of Relay Protection Device Production on Line Control System Based on CPS." In Lecture Notes in Electrical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9437-0_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cai, Jian, Kefeng Tian, Hong Guan, et al. "A High-Precision Composite Control Method for Relay Antennas Based on RF Signals." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-4967-9_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Prieto, Pablo J., Nohe R. Cazarez-Castro, Luis T. Aguilar, and Selene L. Cardenas-Maciel. "Self-tuning for a SISO-type Fuzzy Control Based on the Relay Feedback Approach." In Numerical and Evolutionary Optimization – NEO 2017. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96104-0_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ma, Gaoxiang, Zhongjiang Yan, Mao Yang, and Bo Li. "Bidirectional Scanning Based Medium Access Control Algorithm in Directional Aviation Relay Network with Multiple Air Nodes." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-31275-5_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Relay-Based Control"

1

Gu, Zhiqun, Jiajun Jiang, Tao Dong, Zhihui Liu, and Yuefeng Ji. "Cross-Layer Topology Control Mechanism for FSO-Based UAV Relay Networks." In 2024 IEEE International Conference on Communications Workshops (ICC Workshops). IEEE, 2024. http://dx.doi.org/10.1109/iccworkshops59551.2024.10615902.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Crites, Christine, Robert Muziol, and Ken Apfelbeck. "Lessons Learned Commissioning a Relay-Based Synchronous Motor Excitation Control System." In 2024 IEEE IAS Petroleum and Chemical Industry Technical Conference (PCIC). IEEE, 2024. https://doi.org/10.1109/pcic47799.2024.10830792.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Xiaohan, and Chunyan Han. "Consensus-based Distributed State Estimation over Amplify-and-Forward Relay Networks with Fading Channels." In 2024 43rd Chinese Control Conference (CCC). IEEE, 2024. http://dx.doi.org/10.23919/ccc63176.2024.10662216.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Qiang, Jun Ji, Yan Zhuang, and Yong Li. "Design of Electrical Control Circuit System for Smart Wheelchair Bed Based on Relay." In 2025 8th International Conference on Advanced Electronic Materials, Computers and Software Engineering (AEMCSE). IEEE, 2025. https://doi.org/10.1109/aemcse65292.2025.11042601.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Razaghi, Peyman, and Giuseppe Caire. "Relay strategies based on cross-determinism for the broadcast relay channel." In 2010 48th Annual Allerton Conference on Communication, Control, and Computing (Allerton). IEEE, 2010. http://dx.doi.org/10.1109/allerton.2010.5707009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Prokop, Roman, Jiri Korbel, and Zdenka Propokova. "Relay-Based Autotuning With Algebraic Control Design." In 23rd European Conference on Modelling and Simulation. ECMS, 2009. http://dx.doi.org/10.7148/2009-0531-0536.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Song, Xin, MingLei Zhang, WenMin Liu, and Feng Liu. "Threshold-based hybrid relay selection scheme." In 2016 12th World Congress on Intelligent Control and Automation (WCICA). IEEE, 2016. http://dx.doi.org/10.1109/wcica.2016.7578619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

de Arruda, G. H. M., and P. R. Barros. "Relay based closed loop transfer function estimation." In Proceedings of 2000 American Control Conference (ACC 2000). IEEE, 2000. http://dx.doi.org/10.1109/acc.2000.879514.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhao, Qi, and Shuguang Liu. "Relay protection based on Multi-Agent System." In 2011 International Conference on Electrical and Control Engineering (ICECE). IEEE, 2011. http://dx.doi.org/10.1109/iceceng.2011.6057028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Leva, Alberto. "Employing relay-based identification for improving model-based PI-PID autotuning." In 1997 European Control Conference (ECC). IEEE, 1997. http://dx.doi.org/10.23919/ecc.1997.7082271.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Relay-Based Control"

1

Soramäki, Kimmo. Financial Cartography. FNA, 2019. http://dx.doi.org/10.69701/ertx8007.

Full text
Abstract:
Geographic maps have been of military and economic importance throughout the ages. Rulers have commissioned maps to control the financial, economic, political, and military aspects of their sovereign entities. Large scale projects like the Ordnance Survey in the UK in the late 18th century, and the Lewis and Clark Expedition a few decades later to map the American West, are early examples of trailblazing efforts to create accurate modern maps of high strategic importance. Digitalization, globalization, and a larger urban and educated workforce necessitate a new understanding of the world, beyo
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!