Relevant bibliographies by topics / RENE-77

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers

Academic literature on the topic 'RENE-77'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'RENE-77.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "RENE-77"

1

Saravanan, R., and G. Vinod Reddy. "Structural Investigation on Cooling Design Influences in Rene-77 made Gas Turbine Guide Vanes." International Journal of Advanced Scientific Technologies in Engineering and Management Sciences 3, no. 5 (2017): 7. http://dx.doi.org/10.22413/ijastems/2017/v3/i5/49020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dr., R. Saravanan* M. Karuppasamy. "INVESTIGATION ON STRUCTURAL STABILITY OF CMSX-4 AND RENE 77 MADE SHOWERHEAD COOLING DESIGNED GAS TURBINE GUIDE VANES." Global Journal of Engineering Science and Research Management 4, no. 5 (2017): 145–50. https://doi.org/10.5281/zenodo.801263.

Full text
Abstract:
The efficiency and power output of a thermal device is directly proportional to its inlet temperature. Operating at elevated temperature affects the structural stability of its components under load. The gas turbine is a thermal device in which components like fixed and moving blades experience dynamic loading. Apart from elevated temperature, the design of cooling passages, materials which made up of also influential in their structural stability of the blades. In this research the guide vane (Fixed blade) with the showerhead type cooling of gas turbine is considered. The objective of the res
APA, Harvard, Vancouver, ISO, and other styles
3

Atabay, Sıla Ece, Oscar Sanchez-Mata, Jose Alberto Muñiz-Lerma, and Mathieu Brochu. "Microstructure and mechanical properties of difficult to weld Rene 77 superalloy produced by laser powder bed fusion." Materials Science and Engineering: A 827 (October 2021): 142053. http://dx.doi.org/10.1016/j.msea.2021.142053.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Durejko, Łazińska, Dworecka-Wójcik, Lipiński, Varin, and Czujko. "The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping (LENSTM)." Materials 12, no. 9 (2019): 1366. http://dx.doi.org/10.3390/ma12091366.

Full text
Abstract:
A Tribaloy family of alloys (CoMoCrSi) are characterized by a substantial resistance to wear and corrosion within a wide range of temperatures. These properties are a direct result of their microstructure including the presence of Laves phase in varying proportions. Tribaloy T-800 exhibits the highest content of Laves phase of all other commercial Tribaloy alloys, which provides high hardness and wear resistance. On the other hand, a large content of the Laves phase brings about a high sensitivity to brittle fracture of this alloy. The main objective of this work was a development of the Triba
APA, Harvard, Vancouver, ISO, and other styles
5

Yellowhair, Monica, Desiree Jones, Gabriela Ruiz, et al. "Abstract 434: Development of virtual outreach strategies to supply cancer education and prevention information during the COVID-19 pandemic." Cancer Research 82, no. 12_Supplement (2022): 434. http://dx.doi.org/10.1158/1538-7445.am2022-434.

Full text
Abstract:
Abstract Background: The COVID-19 pandemic has forced many individuals to continue virtually via Zoom. To accommodate this change and remain accessible, the University of Arizona Cancer Center’s Office of Community Outreach and Engagement (COE) transitioned cancer education efforts to virtual webinars and social media. These multilingual and multicultural efforts were targeted toward residents of Arizona, as well as a broader network of participants. Objective: To develop accessible, virtual programming to engage communities across Arizona during the COVID-19 pandemic to continue cancer educat
APA, Harvard, Vancouver, ISO, and other styles
6

Zuljan, Erika, Shuba Varshini Alampalli, Eric Blanc, et al. "Abstract 2399: Genomic and transcriptomic profiling of advanced early-onset colorectal cancer." Cancer Research 85, no. 8_Supplement_1 (2025): 2399. https://doi.org/10.1158/1538-7445.am2025-2399.

Full text
Abstract:
Abstract Background: Incidence rates of early-onset colorectal cancer (EO-CRC) are increasing in high-income countries, yet the underlying causes and optimal clinical management strategies remain unclear. Methods: Comprehensive molecular profiling was conducted on colorectal cancer patients enrolled in the DKTK MASTER program, which includes patients with fresh tumor material, age <50 years, and/or rare cancer types. Profiling utilized RNA sequencing (RNA-seq) and whole-exome (WES) or whole-genome sequencing (WGS). WES data was analyzed for genomic variants, tumor mutational burden (TMB
APA, Harvard, Vancouver, ISO, and other styles
7

Alten, R., W. Rigby, A. Pechonkina, et al. "FRI0115 FILGOTINIB PROVIDED RAPID AND SUSTAINED IMPROVEMENTS IN FUNCTIONAL STATUS, PAIN, AND HEALTH-RELATED QUALITY OF LIFE, AND REDUCED FATIGUE OVER TIME IN PATIENTS WITH RHEUMATOID ARTHRITIS WHO ARE METHOTREXATE-NAÏVE: RESULTS FROM THE FINCH 3 STUDY." Annals of the Rheumatic Diseases 79, Suppl 1 (2020): 638–39. http://dx.doi.org/10.1136/annrheumdis-2020-eular.2927.

Full text
Abstract:
Background:In the FINCH 3 study, filgotinib (FIL)—a potent, selective, oral small molecule Janus kinase 1 inhibitor1—in combination with methotrexate (MTX), demonstrated significant improvements in the signs and symptoms of rheumatoid arthritis (RA) vs MTX alone in patients (pts) who were MTX-naïve.2For pts with RA, rapid control of pain and fatigue along with maintenance of physical function and health-related quality of life (HRQoL) are important outcomes of their care.3Thus, patient-reported outcomes (PROs) can provide physicians with evidence to guide treatment decisions beyond the guideli
APA, Harvard, Vancouver, ISO, and other styles
8

Stouten, V., R. Westhovens, D. De Cock, et al. "THU0214 LONG-TERM EFFECTIVENESS OF METHOTREXATE WITH STEP DOWN GLUCOCORTICOID BRIDGING (COBRA SLIM) VERSUS OTHER CONVENTIONAL DMARD REGIMENS AS INITIAL RA THERAPY: 5-YEAR OUTCOMES OF THE CARERA TRIAL." Annals of the Rheumatic Diseases 79, Suppl 1 (2020): 332–33. http://dx.doi.org/10.1136/annrheumdis-2020-eular.2013.

Full text
Abstract:
Background:The treat-to-target Care in Early Rheumatoid Arthritis (CareRA) trial demonstrated that remission induction with csDMARD combinations and step-down glucocorticoids (GCs) was not superior over methotrexate (MTX) monotherapy with step-down GCs (Cobra Slim) in RA patients with a high-risk profile (1). Moreover, Cobra Slim showed benefit over a tight step-up with MTX in monotherapy (TSU) in RA patients with a low-risk profile.Objectives:To compare the long term outcomes up to 5 years of different initial intensive treatment strategies in participants of the CareRA-plus study.Methods:In
APA, Harvard, Vancouver, ISO, and other styles
9

Pazmino, S., R. Westhovens, V. Stouten, et al. "POS0327 SPEED OF RESPONSE MATTERS: POST-HOC ANALYSIS OF PATIENTS WITH EARLY SERONEGATIVE RHEUMATOID ARTHRITIS INCLUDED IN THE CARERA TRIAL." Annals of the Rheumatic Diseases 82, Suppl 1 (2023): 409–10. http://dx.doi.org/10.1136/annrheumdis-2023-eular.2284.

Full text
Abstract:
BackgroundSeronegative rheumatoid arthritis (RA) patients have been historically considered to have a milder disease course.ObjectivesWe aimed to compare the disease course in seronegative and seropositive patients from the Care in early RA (CareRA) trial.MethodsWe used data from the 2-year RCT CareRA and its 3-year observational follow-up, CareRA plus. Patients completing the year 2 visit of CareRA were eligible for participation in CareRA plus, in which patients were evaluated every 6 months till year 5. The CareRA trial included patients early RA (≤1 year) and naïve to disease-modifying ant
APA, Harvard, Vancouver, ISO, and other styles
10

Van Leeuwen, N., J. Bakker, A. Grummels, et al. "SAT0310 ANTI-CENTROMERE ANTIBODY ISOTYPE LEVELS AS BIOMARKER FOR DISEASE PROGRESSION IN SUBJECTS AT RISK TO DEVELOP SYSTEMIC SCLEROSIS." Annals of the Rheumatic Diseases 79, Suppl 1 (2020): 1100.1–1100. http://dx.doi.org/10.1136/annrheumdis-2020-eular.1511.

Full text
Abstract:
Background:Presence of anti-centromere antibodies (ACA) generally associates with a better prognosis than many other systemic sclerosis (SSc) associated autoantibodies. However, presentation of the disease can be very heterogeneous and prediction of the disease course is challenging. Some older studies suggest a possible association between clinical characteristics and isotypes of ACA in patients with SSc. It is unknown whether ACA can serve as biomarker for future SSc development.Objectives:To evaluate the clinical course of very early SSc and to assess whether ACA isotype levels can identify
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "RENE-77"

1

Wang, Chao-yang, and 王朝揚. "Numerical Simulation of Directionally Solidified Rene 77 Superalloy." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/46664764927458810082.

Full text
Abstract:
碩士<br>義守大學<br>機械與自動化工程學系碩士班<br>95<br>In this study, the vertical cylindrical Bridgman furnace was used to melt Rene 77 nickel-based superalloys at 1600°C and to fabricate the DS test bars by high rate solidification (HRS) process. During the withdraw process, temperature changes of the test bar were measured and recorded for further temperature gradient analysis. As the numerical simulation of the directional solidification process, geometry shapes were firstly established by SolidWoks, and then automatically meshed by GEOMESH, finally analyzed by the CAE software ProCAST. During the numerical
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Yi-Hsuan, and 吳奕璇. "Melt-in Fusion Welding of Rene 77 Nickel-Base Superalloy." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/75806307974317543880.

Full text
Abstract:
碩士<br>中興大學<br>材料工程學系所<br>95<br>Generally speaking, Nickel-base superalloys contained activity elements.As a result, they are found defects easily as slag entrapment in it. In this situation, we can use melt-in fusion weld to repair these defects and increase the service life of weld piece. However, the elements of nickel-base superalloys are complex, and those elements are harmful during welding. For this reason, it might cause the occurrence of post-weld cracking in welding bead and heat-affected zone. And because of the residual stress in weldment, it would induce reheat cracking during post
APA, Harvard, Vancouver, ISO, and other styles
3

Chiang, Pei-Ching, and 江沛青. "The Influence of Process Parameters on Castability and Microstructure of Rene’77." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/22470546599520207180.

Full text
Abstract:
碩士<br>義守大學<br>材料科學與工程學系<br>92<br>Purpose of this research is the identification and modification of certain lost-wax vacuum-pouring investment casting process parameters which will result in improved mechanical hardness and microstructural properties when working with the material Rene’77. Observations and comparisons are made on both castings and coupons concerning different end results of macro-grain sizes, dendrite arm spacings and microporosity when different processing parameters are utilized. Castings are then subject to solution heat treat, aging, HIP and VPA coating after which final a
APA, Harvard, Vancouver, ISO, and other styles
4

Huang, Jhih-ying, and 黃致穎. "Microstructure Development and Crack Behaviors of the Pulsed Nd:YAG Laser Repair Welded RENE 77 Nickel-base Superalloy." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/51092308431336821931.

Full text
Abstract:
碩士<br>義守大學<br>材料科學與工程學系碩士班<br>97<br>To eliminate cracks of René 77 nickel base superalloy welds caused by high energy input of the traditional TIG (Tungsten Inert Gas) process, a low power and pulsed welding technique, Nd:YAG laser welding (LW) with René 41 welding wires, was used in this study. A series of laser welding parameters (including various energy inputs and grove designs) were applied to investigate their microstructure development and find out their possible crack mechanism. Moreover, a weld without crack produced by TIG welding process was studied to compare its microstructure and
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "RENE-77"

1

Janicki, Damian M. "Fiber laser welding of nickel based superalloy Rene 77." In Tenth Symposium on Laser Technology, edited by Wiesław L. Woliński, Zdzisław Jankiewicz, and Ryszard S. Romaniuk. SPIE, 2013. http://dx.doi.org/10.1117/12.2013428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography