Relevant bibliographies by topics / Repair tool

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Repair tool'

Author: Grafiati
Published: 7 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Repair tool.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Repair tool"

1

Almyda, Steve. "Coupling Tool Eases Pipe Repair." Opflow 43, no. 10 (2017): 26. http://dx.doi.org/10.5991/opf.2017.43.0068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

McDonald, Jerry. "Handwheel Gate Valve Repair Tool." Opflow 11, no. 1 (1985): 5. http://dx.doi.org/10.1002/j.1551-8701.1985.tb00375.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Megahed, Sandra, Raphael Koch, and Johannes Henrich Schleifenbaum. "Laser Powder Bed Fusion Tool Repair: Statistical Analysis of 1.2343/H11 Tool Steel Process Parameters and Microstructural Analysis of the Repair Interface." Journal of Manufacturing and Materials Processing 6, no. 6 (2022): 139. http://dx.doi.org/10.3390/jmmp6060139.

Full text
Abstract:
High pressure die casting (HPDC) tools undergo several repairs during their life cycle. Traditional repair methods (e.g., welding) cannot always be applied on damaged tools, necessitating complete replacement. Usually, direct energy deposition (DED) is considered and applied to repair tools. In this study, the potential of laser powder bed fusion (LPBF) for HPDC tool repair is investigated. LPBF of the hot work tool steel 1.2343/H11 normally requires preheating temperatures above 200 °C to overcome cracking. Therefore, a process window for the crack-susceptible hot work tool steel 1.2343/H11 w
APA, Harvard, Vancouver, ISO, and other styles
4

Zhao, Jingwen, Yanxia Wu, Yan Fu, and Shuyong Liu. "ESfix: An Embedded Program Repair Tool for Effective Removal of Concurrency Defects." Entropy 27, no. 3 (2025): 294. https://doi.org/10.3390/e27030294.

Full text
Abstract:
Embedded programs are not only inseparable from our daily lives but are also widely used in aerospace, medical devices, and other fields that require very high security and stability. The uncertainty and randomness of the large amount of data generated by these systems during operation can be quantified by entropy. Traditional repair methods for concurrency defects may introduce new issues such as deadlocks, original semantic destruction, and high performance overhead. To overcome the limitations of the existing methods and help developers reduce the time and effort spent on fixing software de
APA, Harvard, Vancouver, ISO, and other styles
5

Gillinov, Marc, Daniel J. P. Burns, and Per Wierup. "Commentary: The mitral repair tool kit." Journal of Thoracic and Cardiovascular Surgery 160, no. 2 (2020): 395. http://dx.doi.org/10.1016/j.jtcvs.2019.07.079.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Brink, Carl B. "Tool Simplifies Repair of Service Boxes." Opflow 13, no. 10 (1987): 4. http://dx.doi.org/10.1002/j.1551-8701.1987.tb00464.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rojas, Victor A., Ismael Y. Hidalgo, Khaled Matalgah, et al. "Elucidating the Effects of Material Flow from Deposition Offset on AFSD Repair of AA7050." Metals 15, no. 2 (2025): 164. https://doi.org/10.3390/met15020164.

Full text
Abstract:
In this work, the effects of tool bias as a processing parameter on an additive friction stir deposition repair of AA7050-T7451 plates were investigated. In this study, the asymmetrical material flow effect was assessed by subjecting a machined groove plate to different tool biases during the AFSD process. The tool bias effectiveness on repairs was quantified through mechanical testing and destructive and non-destructive evaluation. Monotonic tensile tests conducted in parallel with a digital image correlation method captured the mechanical performance of the repairs and the local strain effec
APA, Harvard, Vancouver, ISO, and other styles
8

Kettle, S. J. A., N. E. Starritt, M. A. Glasby, and T. E. J. Hems. "End-to-side nerve repair in a large animal model: how does it compare with conventional methods of nerve repair?" Journal of Hand Surgery (European Volume) 38, no. 2 (2012): 192–202. http://dx.doi.org/10.1177/1753193412445119.

Full text
Abstract:
A large animal (sheep) model was used to compare nerve axon regeneration and return of muscle function after a median-to-ulnar nerve end-to-side neurorrhaphy technique with conventional, clinically established, methods of nerve repair and untreated controls. Three groups of sheep were allocated to end-to-side repair (12 animals), a conventional method of nerve repair (18 animals), or a control group (eight animals). After a year nerve repairs were assessed electrophysiologically and histologically, and the muscles supplied by the repaired nerves were assessed physiologically. There were no sig
APA, Harvard, Vancouver, ISO, and other styles
9

Sledkov, Yu G., L. L. Khoroshko, and P. M. Kuznetsov. "Reorganization of Machine-Tool Repair in Manufacturing." Russian Engineering Research 41, no. 12 (2021): 1233–35. http://dx.doi.org/10.3103/s1068798x2112039x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Subramaniam *, V., A. S. Raheja, and K. Rama Bhupal Reddy. "Reactive repair tool for job shop schedules." International Journal of Production Research 43, no. 1 (2005): 1–23. http://dx.doi.org/10.1080/0020754042000270412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Repair tool"

1

Fairbank, Sandra Trubow. "Urban agriculture as a tool for neighborhood fabric repair in post-industrial Detroit." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/69462.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Urban Studies and Planning, 2011.<br>"September 2011." Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 118-121).<br>This thesis focuses on Detroit as a post-industrial city that suffers from abandonment, vacancy, and food security issues. I address this problem through the lens of agriculture, asking how urban farming can be used to repair the urban fabric and increase access to food in two Detroit neighborhoods. To this end, I suggest a variety of urban agriculture uses that can be integrated into
APA, Harvard, Vancouver, ISO, and other styles
2

Van, den Berg Gideon. "Hidden Markov models for tool wear monitoring in turning operations." Diss., Pretoria : [s.n.], 2004. http://upetd.up.ac.za/thesis/available/etd-05302005-114238/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chilaka, Neelesh. "Applications of water network tool for resilience (WNTR) for metrics and repair strategies of water distribution systems." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/24196/.

Full text
Abstract:
Drinking water systems will always face multiple challenges with respective to aging infrastructure, concerns related to water quality, uncertainty in supply and demand, disruptive events like environmental urgencies, natural disasters, and cyber and terrorist attacks. All of the above-mentioned incidents have the potential to disrupt a large part of a water system or the whole water distribution system either causing the damage to vital parts of infrastructure, affecting the human health, and interrupting service to consumers.Urban or metropolitan communities have experienced loss of infrastr
APA, Harvard, Vancouver, ISO, and other styles
4

Quanz, Maria. "DNA double-strand break mimicking molecules (Dbait) : a tool to disorganize damage signaling and inhibit DNA repair." Paris 11, 2010. http://www.theses.fr/2010PA11T089.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bianco, John I. "Stem Cells and Ensheathing Cells from the Nasal Olfactory Mucosa: a Tool for the Repair of the Damaged Spinal Cord." Thesis, Griffith University, 2008. http://hdl.handle.net/10072/368098.

Full text
Abstract:
The olfactory mucosa has been shown to be a site where continual regeneration takes place throughout adulthood, making this system relatively unique with great potential in respect to autologous cell graft therapies. The olfactory mucosa is readily accessible with no deleterious effects on olfaction if biopsied. The presence of olfactory ensheathing cells (OECs), as well as a stem cell to facilitate the regeneration of this tissue, has been previously described. The first aim of this study was to further characterise olfactory ensheathing cells in rat and human and to gain some insights into t
APA, Harvard, Vancouver, ISO, and other styles
6

BALBI, CAROLINA. "The Human Amniotic Fluid Stem Cell Secretome as a powerful tool to unlock endogenous mechanism of cardiac repair and regeneration." Doctoral thesis, Università degli studi di Genova, 2018. http://hdl.handle.net/11567/929667.

Full text
Abstract:
Human amniotic fluid stem cells (hAFS) are immature fetal mesenchymal progenitors with promising paracrine potential, as previously shown by a study in a preclinical rat model of ischemia/reperfusion injury. Nevertheless, little is known about the comprehensive analysis of their secretome, which is represented by the whole of soluble secreted factors and extracellular vesicles (EV) released in the cell conditioned medium (hAFS-CM). The aim of this PhD project is to characterise in details the hAFS secretome paracrine modulatory capacity, including the role of their extracellular vesicles, for
APA, Harvard, Vancouver, ISO, and other styles
7

Boutobza, Slimane. "Outils de génération de structures BIST/BISR pour mémoires." Grenoble INPG, 2002. http://www.theses.fr/2002INPG0166.

Full text
Abstract:
Les Systems on Chip (SoC) actuels intègrent en général une grande proportion de mémoires enterrées. Ces mémoires sont de plus en plus denses et occupent des surfaces très importantes dans le circuit (jusqu'à 80%). Ces mémoires peuvent présenter un grand taux de défauts affectant ainsi d'une façon conséquente le rendement total du circuit. La qualité de la mémoire et donc cruciale pour la qualité de l'ensemble du circuit. D'autre part, la réduction du coût du développement passe par la réduction du coût du test. Enfin, le management de la complexité de test des structures de plus en plus comple
APA, Harvard, Vancouver, ISO, and other styles
8

Wimmer, Felix. "Application Cases and Integration of Additive Manufacturing Processes into Conventional Process Chains by the Example of Tool Repair Using the Con-trolled Metal Build-Up Process." Thesis, KTH, Industriell produktion, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-183095.

Full text
Abstract:
In the first part of this thesis an overview of the most common Additive Manufacturing (AM) processes and a valid classification scheme outside of the classification of conventional ma-chining processes is presented. Advantages and shortcomings of these processes are briefly explained and application cases from the industry are given. Transitioning from the shortcom-ings of current Additive Manufacturing processes the so called “hybrid additive subtractive” processes are introduced.The concept, setup, and machinery of these systems are explained by the example of the Controlled Metal Build-Up
APA, Harvard, Vancouver, ISO, and other styles
9

Bertoldi, Evandro. "Desenvolvimento de método e ferramenta para aplicação submarina de clamps de reparo de dutos ou proteção de sistemas de monitoramento." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2018. http://hdl.handle.net/10183/178216.

Full text
Abstract:
O escoamento entre o poço marítimo e a unidade flutuante é realizado através de dutos definidos como risers. Os risers flexíveis são compostos por camadas intercaladas de diferentes materiais, como aço e polietileno, o qual cada camada possui uma função. Os mecanismos de falha mais reportados são referentes a danos na camada externa polimérica, o que leva à exposição de suas armaduras metálicas ao meio externo. Os risers rígidos são dutos fabricados normalmente em aço, formados por segmentos de dutos unidos por soldas, onde a causa de dano mais frequente é a corrosão. Tem-se como objetivo nest
APA, Harvard, Vancouver, ISO, and other styles
10

Kraevoy, Vladislav. "Model repair and editing tools." Thesis, University of British Columbia, 2007. http://hdl.handle.net/2429/31370.

Full text
Abstract:
With the declining production cost and improvement of scanning technology, three-dimensional model acquisition systems are rapidly becoming more affordable. At the same time, personal computers with graphics hardware capable of displaying complex 3D models have become inexpensive enough to be available to a large population. As a result, there is, potentially, an opportunity to consider new virtual reality uses from areas as diverse as cultural heritage exploration and retail sales applications that will allow people to view associated large classes of realistic 3D objects on home computers an
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Repair tool"

1

Thompson, Steve. Handbook of mould, tool and die repair welding. Abington, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Graves, Sarah. Tool & Die. Random House Publishing Group, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Graves, Sarah. Tool & die. Center Point, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bailey, David M. ROOFER, a management tool for maintaining built-up roofs. US Army Corps of Engineers, Construction Engineering Research Laboratory, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mechanical Contractors Association of America., ed. Tool and equipment rental guide. Mechanical Contractors Association of America, Inc., 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Loredo, Elvira N. Programmed depot maintenance capacity assessment tool: Workloads, capacity, and availability. RAND, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Thiel, David. David Thiel's power tool maintenance. Popular Woodworking Books, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Thiel, David. David Thiel's Power Tool Maintenance. F+W Media, Inc., 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

David, Hawkins. When your marriage needs repair: A no-nonsense tool for restoring your marriage. Cook Communications, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hanna, James B., Senior Program Engineer., Flowcare Engineering Inc, and Pacific Gas and Electric Company., eds. Electric motor performance analysis tool (PAT): Market transformation plan. Pacific Gas and Electric Company, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Repair tool"

1

Kölbl, Martin, Stefan Leue, and Thomas Wies. "TarTar: A Timed Automata Repair Tool." In Computer Aided Verification. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53288-8_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tres, Paul A. "Appendix D: Tool Repair & Inspection Record." In Designing Plastic Parts for Assembly, 9th ed. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.3139/9781569908211.015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lomanto, Davide, and Eva Lourdes Sta Clara. "Totally Extraperitoneal Approach in Inguinal Hernia Repair." In Mastering Endo-Laparoscopic and Thoracoscopic Surgery. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3755-2_56.

Full text
Abstract:
AbstractInguinal hernia can be repaired endoscopically via three methods namely total extraperitoneal (TEP), transabdominal pre-peritoneal (TAPP), and the less common intraperitoneal onlay mesh (IPOM) repair. The first two are widely utilized for the obvious advantages of lower recurrence and complication rates, and better outcome (less pain, less analgesic reqirement, less surgical site infection, reduced length of hospital stay, early return to daily activity, etc.) when compared to the open repair while covering all the potential hernia site in the myopectineal orifice with a large prosthes
APA, Harvard, Vancouver, ISO, and other styles
4

Zaïr, Zoulikha M., and George E. Johnson. "The Applicable Use of the HPRT Gene Mutation Assay as a Practical Tool in Mutagenesis and DNA Repair Studies." In Genotoxicity and DNA Repair. Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-1068-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Assiri, Fatmah Y., and James M. Bieman. "MUT-APR: MUTation-Based Automated Program Repair Research Tool." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03405-4_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Agasse, Fabienne, Liliana Bernardino, and João O. Malva. "Subventricular Zone Cells as a Tool for Brain Repair." In Interaction Between Neurons and Glia in Aging and Disease. Springer US, 2007. http://dx.doi.org/10.1007/978-0-387-70830-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jäger, M., M. Herten, E. M. Jelinek, U. Fochtmann, and R. Krauspe. "Bone Marrow Concentrate: a novel tool for bone repair!" In IFMBE Proceedings. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03900-3_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

dos Santos, Miriam Oliveira, Carlos Eduardo Ribeiro de Mello, and Tadeu Moreira de Classe. "A Useful Tool to Support the Ontology Alignment Repair." In Intelligent Systems. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-61380-8_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shi, Lei, Yuepeng Wang, Rajeev Alur, and Boon Thau Loo. "Automatic Repair for Network Programs." In Tools and Algorithms for the Construction and Analysis of Systems. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99527-0_19.

Full text
Abstract:
AbstractDebugging imperative network programs is a difficult task for operators as it requires understanding various network modules and complicated data structures. For this purpose, this paper presents an automated technique for repairing network programs with respect to unit tests. Given as input a faulty network program and a set of unit tests, our approach localizes the fault through symbolic reasoning, and synthesizes a patch ensuring that the repaired program passes all unit tests. It applies domain-specific abstraction to simplify network data structures and exploits function summary r
APA, Harvard, Vancouver, ISO, and other styles
10

Shen, Zhenjiang, Mitsuhiko Kawakami, Masayasu Tsunekawa, and Eiichi Nishimoto. "Online Learning Tool for Repair of Traditional Merchant Houses: Machiya." In Geospatial Techniques in Urban Planning. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-13559-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Repair tool"

1

Chi, Sangki, Mohammed Alrudayni, and Mana Al-Mansour. "Optimized Surface Preparation Method for Maintenance and Repair Coating." In MECC 2023. AMPP, 2023. https://doi.org/10.5006/mecc2023-19877.

Full text
Abstract:
Abstract There are many methods for surface preparation in the coating industry, including abrasive blasting, power tools and hand tools. Experience proved that abrasive blasting is the best method for surface preparation, however it has some limitations for coating repair such as accessibility, time constrain and damaging to surrounding area, etc. New power tool technology was recently introduced to improve the performance of conventional power tool and hand tool methods. In this study, we have evaluated workability and coating performance with different surface preparation methods in accorda
APA, Harvard, Vancouver, ISO, and other styles
2

Shoyer, Eric. "Power Tool Surface Preparation in Shipyards." In Coatings+ 2021. SSPC, 2021. https://doi.org/10.5006/s2021-00029.

Full text
Abstract:
Abstract Power tool cleaning has been a common method of surface preparation prior to coating application since the dawn of steel shipbuilding. Power tools are usually handheld pneumatic, or sometimes electric, devices that through impacting or abrasive action can remove coating and corrosion. Most commonly power tool cleaning has been used for re-work or coating repair associated with outfitting. Typically, power tools are limited to the touch up or repair of small areas or areas that cannot be accessed by bulkier equipment such as abrasive blasters. Despite having lower production rates and
APA, Harvard, Vancouver, ISO, and other styles
3

Fryett, Sam, and Chris Isaacson. "Electric Transmission Tower Corrosion Analysis Tool." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11563.

Full text
Abstract:
Abstract High voltage transmission towers have shown susceptibility to below grade and at grade corrosion due to varying soil and environmental conditions. This paper will present the risk ranking approach for tower assessments by using the Tower Corrosion Analysis Tool. This analysis is based on integrated corrosion science, field electrochemical and assessment technologies with field deployable computing hardware in a tool that can provide real-time risk ranking. This approach allows field technicians and engineers to enter, store and analyze electrochemical and physical measurements with a
APA, Harvard, Vancouver, ISO, and other styles
4

Pellizzari, Massimo, Zhao Zhao, Edoardo Tronconi, Matteo Perini, Sasan Amirabdollahian, and Faraz Deirmina. "Post-Process Heat Treatment of Tool Steel Dies Repaired by Laser Direct Energy Deposition." In IFHTSE 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.ifhtse2024p0173.

Full text
Abstract:
Abstract Mold repair is a viable strategy for saving energy and reducing CO2 emissions. Papers in the literature show that repairing a limited damaged area of the mold instead of producing a new one is becoming increasingly attractive, especially considering the latest European and international regulations introduced with the green deal. In this paper, the authors are pleased to present some preliminary results related to the repair of AISI H13 tool steel molds by Laser-Directed Energy Deposition. Steel blocks (20 x 55 x 100 mm3), previously tempered at 435±10 HV, were machined to reproduce t
APA, Harvard, Vancouver, ISO, and other styles
5

Broomfield, John P. "A Web Based Tool for Selecting Repair Options and Life Cycle Costing of Corrosion Damaged Reinforced Concrete Structures." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05254.

Full text
Abstract:
Abstract The UK concrete repair industry is believed to turn over $2 billion per annum, more than 3% of the entire UK construction industry turnover. While many structures are well maintained within a suitable management program, a number of owners do not have the resources to cope effectively when presented with a one off problem, their first or their only case of reinforcement corrosion. This paper described a new web based tool to guide the user through the process of: prediction of time to chloride or carbonation induced reinforcement corrosion,the selection of effective repair options,the
APA, Harvard, Vancouver, ISO, and other styles
6

Engen, Donald, and Mohammed Jaarah. "Identification and Repair of Narrow Axial External Corrosion Using Ultrasonic Internal Inspection." In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99533.

Full text
Abstract:
Abstract This paper discusses the use of internal inspection tools and in particular the more recent use of ultrasonic internal inspection technology to assist in the identification and repair of Narrow Axial External Corrosion (NAEC) on a large diameter crude oil pipeline. Intensive internal inspection and repair programs undertaken by the pipeline operator in the last two years have significantly improved the integrity of an aging pipeline exhibiting some unique corrosion problems. The use of ultrasonic technology has proven to be a reliable, effective and valuable tool for identifying NAEC,
APA, Harvard, Vancouver, ISO, and other styles
7

Kurth, Jonah C., and John S. Lawler. "Service Life Modeling: an Assessment Tool for Existing Concrete Structures." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02726.

Full text
Abstract:
Abstract Service life modeling can be a valuable tool to guide corrosion assessment and control strategies in reinforced concrete structures. After 25 years of service, many of the concrete tanks and other structures at a wastewater treatment plant are experiencing corrosion of embedded reinforcing steel. An in-depth assessment of a tower trickling filter was performed to determine the cause and extent of corrosion-related deterioration and develop appropriate repair and corrosion control strategies. Evaluation techniques used for the assessment included half-cell potential, corrosion rate, an
APA, Harvard, Vancouver, ISO, and other styles
8

Crump, H. M., and Stefan Papenfuss. "Utilization of Magnetic Flux Leakage Inspection Pigs for Hard Spot Detection and Repair." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91366.

Full text
Abstract:
Abstract The conscientious pipeline operator must monitor many aspects of operational pipeline deterioration. Additionally, some operators must deal with pipelines containing manufacturing defects known as hard spots. Under certain conditions hard spots may crack and fail. A magnetic flux leakage tool readily detects regions of elevated hardness (hard spots) in line pipe. Hard spots may be evaluated with a hardness tester and gauss meter. Repair of hard spots can be accomplished by pipe replacement or the installation of full encirclement split sleeves. By reliable detection of hard spots with
APA, Harvard, Vancouver, ISO, and other styles
9

Rao, Shan (Sherry), Da Kuang, and Connor McManus. "Study of Minimal Surface Preparation for Various Patch Repair Coating Products Applied under the Minimum Allowable Temperatures." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-21005.

Full text
Abstract:
Abstract Patch repair coating products provide cost-effective solutions for restoring small to medium-sized damages in mainline coatings to extend the lifespan of pipelines. Some coating products are specially designed to tolerate reduced surface conditions while providing the adequate corrosion protection performance. Due to easy mobilization and relatively inexpensive, power tool cleaning is commonly used in the field to prepare surfaces for small area repairs. During field coating work, adverse weather conditions are often encountered. However, little data were publicly available to support
APA, Harvard, Vancouver, ISO, and other styles
10

Laughlin, Shawn. "Conformable Array Corrosion Mapping Tool." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10171.

Full text
Abstract:
Abstract Corrosion detected by in-line inspection tools or bell-hole examination must undergo subsequent evaluation to determine the proper action, if any, to be taken. A corrosion assessment must be made before deciding to repair the corroded area or to remove it from service. Traditional practice uses manual measurements along a mapped grid over the locations on the pipe. Newer, more accurate corrosion assessment methods use detailed measurements of the corrosion profile rather than simply the length and maximum depth of the defect area. The industry needs a simple, more accurate method for
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Repair tool"

1

Bell, Haley, and Jeb Tingle. Inclement weather crater repair tool kit. Geotechnical and Structures Laboratory (U.S.), 2017. http://dx.doi.org/10.21079/11681/25667.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Beavers. L51700 Damage Assessment Tool. Pipeline Research Council International, Inc. (PRCI), 1993. http://dx.doi.org/10.55274/r0010604.

Full text
Abstract:
This report documents the requirements and possible configurations of a tool or system to inspect and assess the repairability of a damaged submerged pipeline. This work was done in conjunction with research to develop a diverless repair clamp for repairing small leaks in deep water pipelines.
APA, Harvard, Vancouver, ISO, and other styles
3

Kenneth H. Green, Willie E. Rochefort, Nick Wannenmacher, John A. Clark, and Kevin Harris. Development of a Remote External Repair Tool for Damaged or Defective Polyethylene Pipe. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/908747.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ross, Kenneth, Xiujuan Jiang, Morotolaoluwa Alabi, and Carl Enderlin. Investigation of Cold Spray as a Dry Storage Canister Repair and Mitigation Tool. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1765140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Koster, C. Design, build, develop and test a fieldworthy spiral tool and packer for casing repair. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/7024666.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Koster, C. Design, build, develop, and test a fieldworthy spiral tool and packer for casing repair. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/7068010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Koster, C. Design, build, develop and test a fieldworthy spiral tool and packer for casing repair. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/6947680.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Koster, C. Design, build, develop and test a fieldworthy spiral tool and packer for casing repair. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/6604616.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hart and Jaske. L51957 Permanent Field Repair of SCC - Review. Pipeline Research Council International, Inc. (PRCI), 2004. http://dx.doi.org/10.55274/r0011271.

Full text
Abstract:
Implementing an engineering critical assessment (ECA) to guide the SCC flaw disposition is a valuable tool operators have in making a repair decision. When SCC is found by inspection, the effect of this cracking on failure stress and remaining life must be evaluated to decide what action should be taken � continued operation, type of repair, or replacement. This is not widely practiced in industry because of either the unfamiliarity of the analysis or the costs involved. One option considered during this research project was to have operators conduct a generic ECA on their entire line ahead of
APA, Harvard, Vancouver, ISO, and other styles
10

Ersoy, Daniel, and Ernest Lever. DTPH56-15-T-00006 Characterization and Fitness for Service of Corroded Cast Iron Pipe. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0012163.

Full text
Abstract:
The Cast Iron Fitness-For-Service model described in the main body of this report forms an ideal basis for a simulation tool that can display aggregate system performance in a geospatial database. This simulation tool can provide the operator risk-informed geospatial input into their mitigation programs. The tool can also be extended to temporal consideration of future repair/replace programs.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Repair tool' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography