Log in

Relevant bibliographies by topics / Replacement of obsolete equipment

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Replacement of obsolete equipment'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Replacement of obsolete equipment.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Replacement of obsolete equipment"

1

Subodh, Kuwar* Swapnil Wadile Vikas Surve Yogesh Yeole Aditya Hyalij Vikram Patel. "AN EXPERIMENTAL EXPLORATION OF CONCRETE PAVEMENT USING ELECTRONIC WASTE AS A PARTIAL REPLACEMENT." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 5 (2016): 107–13. https://doi.org/10.5281/zenodo.51002.

Full text

Abstract:

Now-a-days the production of electrical and electronic devices is the fastest growing sector worldwide. The rapid change in equipment features and capabilities reduces the life-time of consumer-oriented electronic devices. This waste stream of obsolete electronic equipment is the base for electronic waste. E-waste, e-scrap or Waste Electrical and Electronic Equipment depict loosely discarded, obsolete or broken electrical or electronic devices. This research aims to investigate the use of recycled plastic components of E-waste in concrete used in Rigid Pavements. This is an alternative solutio

APA, Harvard, Vancouver, ISO, and other styles

2

Teodorescu, Laurenţiu, and Gabriel Dima. "High Performance Broadcast Receiver Based on Obsolete Technology." Sensors 22, no. 18 (2022): 6784. http://dx.doi.org/10.3390/s22186784.

Full text

Abstract:

Since its inception, the electronics industry has mass-produced equipment. The fast evolution of electronic technologies made obsolete the entire generation of products and even technologies. Until the government issued regulations and guidelines on how to address the issue of reuse of obsolete electronic equipment, with special regard to the ones still operating (e.g., give it to family/friends, donate to charity, or sell to individuals or recycling companies), most of it was thrown out with usual rubbish, with a destructive effect on the environment. This paper presents the design techniques

APA, Harvard, Vancouver, ISO, and other styles

3

Medici, Mario Fregonara, Stefania Bellelli, Luciano Villarboito, and Michela Pepe. "PP137 Regional Process For Planning Medical Equipment Procurement In Italy." International Journal of Technology Assessment in Health Care 33, S1 (2017): 135. http://dx.doi.org/10.1017/s0266462317002860.

Full text

Abstract:

INTRODUCTION:An appropriate governance of the installed equipment base, by defining replacements strategies and programming introductions of innovative Biomedical Technologies (BT), has direct effects on the efficiency and effectiveness of health systems. An effective health technology management is of paramount importance for providing safe, high quality and innovative care with the constraint of health-care budgets, safeguarding equity, access and choice principles. Data from the regional BT information flow show that, compared to the gold standard (1), the North Region of Italy has about 15

APA, Harvard, Vancouver, ISO, and other styles

4

Safarova, Lydmila, Andrey Malikov, Alexandr Yamnikov, and Olga Yamnikova. "Technological prerequisites for the energy efficiency increase of the engine cylinder bore processing." E3S Web of Conferences 279 (2021): 01001. http://dx.doi.org/10.1051/e3sconf/202127901001.

Full text

Abstract:

An example of the rationalization of the current technology for manufacturing a cylinder of a small-sized diesel engine at PA “TULAMASHZAVOD” from a cast iron is given. It is shown that lowpower obsolete equipment leads to an increase in the number of technological operations and equipment used. However, even if all the generally accepted technological recommendations are followed, only 80% of the parts meet the requirements for the required parameters of accuracy and quality of the cylinder bore surface. Studies have found that the main reasons for insufficient quality are the presence of res

APA, Harvard, Vancouver, ISO, and other styles

5

Omorodion, I. I., and N. N. Ehigiamusoe. "Equipment Design and Development: The Control System Feedback Approach to Reverse Engineering." Journal of Electrical, Control and Technological Research 3 (November 30, 2021): 20–25. http://dx.doi.org/10.37121/jectr.vol3.164.

Full text

Abstract:

In many manufacturing engineering organizations, equipment is several years old, and as a result of this, engineering design details and manufacturing documentation may possibly not be available or obsolete. Manufacturing and subsequent replacement of such equipment can turn out to be a major setback. The dearth of knowledge about the functioning of the equipment, inadequate technical information and unspecified operating conditions hampers the design, development and production of this equipment. The reverse engineering technique approach is key to solving the problems of equipment lacking de

APA, Harvard, Vancouver, ISO, and other styles

6

Saranya. V. "A Comparison Study on Replacing Machines in Uncertain Environments whose Maintenance Costs Increase with Different Scrap Values Over Time." Communications on Applied Nonlinear Analysis 31, no. 2s (2024): 57–71. http://dx.doi.org/10.52783/cana.v31.593.

Full text

Abstract:

Replacement is a type of maintenance performed on a system to ensure that it operates efficiently and effectively. Replacement theory is commonly used to describe the replacement of machines or equipment due to deterioration, decreased efficiency, failure, or breakdown. In applications dealing with uncertainty, an intuitionistic fuzzy set has been used. The purpose of this study is to investigate the replacement problem with uncertainty. This problem involves imprecise capital cost, imprecise scrap value or salvage value, and an imprecise maintenance cost. The imprecise values are assumed to b

APA, Harvard, Vancouver, ISO, and other styles

7

López, J., and C. Vila. "An approach to Reverse Engineering Methodology for Part Reconstruction with Additive Manufacturing." IOP Conference Series: Materials Science and Engineering 1193, no. 1 (2021): 012047. http://dx.doi.org/10.1088/1757-899x/1193/1/012047.

Full text

Abstract:

Abstract In diverse sectors such as aerospace, transport or energy, equipment is several decades old. Due to their extended lifespan, technical and manufacturing documentation might be inaccessible or inexistent. Manufacturing process problems, wear occurring during a part life cycle, or even the unavailability of digital data (redesign of obsolete parts produced in pre-digital era, legal restriction, or trade secrecy) are some examples to outline the lack of reliable 3D data for manufacturing purposes. The manufacturing and subsequent replacement of these components can turn into a significan

APA, Harvard, Vancouver, ISO, and other styles

8

Халупка, Ю. М., and В. В. Орищенко. "BUILDING AND CONSTRUCTION RECONSTRUCTION DESIGN." Building production, no. 76 (September 18, 2024): 32. http://dx.doi.org/10.36750/2524-2555.76.32-36.

Full text

Abstract:

In order to create the necessary conditions for life and development of society, the production of various products are organized. The nomenclature and consumer qualities of the produced products are determined by the level of scientific and technical development, economic and social living conditions. For the production of products, houses and buildings are erected, which are equipped with certain means of production. The term of functioning of means of production is due to physical and moral wear and tear of machines and mechanisms. Buildings and structures in, which means production are loc

APA, Harvard, Vancouver, ISO, and other styles

9

Bartle, J. A. "Incidental capture of seabirds in the New Zealand subantarctic squid trawl fishery, 1990." Bird Conservation International 1, no. 4 (1991): 351–59. http://dx.doi.org/10.1017/s0959270900000708.

Full text

Abstract:

SummaryFisheries observers recorded incidental capture of seabirds during 338 days on Soviet squid trawlers in New Zealand subantarctic shelf waters around the Snares and Auckland Islands in 1990. Seven species were recorded entangled in fishing gear, including very high numbers of breeding adult White-capped Albatrosses Diomedea cauta steadi. The actual level of White-capped Albatross mortality was estimated at 2,300 birds in 1990, and is not considered sustainable. Nearly all albatrosses were killed by collision with the netsonde monitor cable. In New Zealand waters this equipment is carried

APA, Harvard, Vancouver, ISO, and other styles

10

Kaplina, T. Yu, and А. O. Don. "REPLACEMENT OF OBSOLETE EQUIPMENT FOR RELAY PROTECTION AND AUTOMATION AT SUBSTATION “KARA-BALTA” 220/110/10 KV, KYRGYZ REPUBLIC." Vestnik of the Kyrgyz-Russian Slavic University 22, no. 8 (2022): 28–33. http://dx.doi.org/10.36979/1694-500x-2022-22-8-28-33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Replacement of obsolete equipment"

1

Вишнева, Л. А. "Модернизация системы управления технологическим процессом отделения белой фильтрации". Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/10434.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kim, Kyongsun Park Chan S. "Group versus staggered replacement policy strategic replacement decisons /." Auburn, Ala, 2008. http://repo.lib.auburn.edu/EtdRoot/2008/SUMMER/Industrial_and_Systems_Engineering/Thesis/Kim_Kyongsun_56.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wake, D. C. "The optimal replacement of mining equipment." Thesis, University of Nottingham, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376166.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Okereke, C. S. "Optimal replacement strategies for coal extraction equipment." Thesis, University of Bradford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373218.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Cohen, Gavin. "Equipment replacement decision making in the mining industry." Thesis, Stellenbosch : Stellenbosch University, 2001. http://hdl.handle.net/10019.1/52260.

Full text

Abstract:

Thesis (MBA)--Stellenbosch University, 2001.<br>Some digitised pages may appear illegible due to the condition of the original hard copy<br>ENGLISH ABSTRACT: The decision to make equipment replacements has a major influence on the competitiveness of any business. A company like Iscor recently spent approximately one billion Rand to modernise its fleet of equipment at various centres. This report presents a holistic approach to the issue of equipment replacement decision-making. It contends that equipment replacement decisions are not isolated incidents that occur by chance. In fact, the

APA, Harvard, Vancouver, ISO, and other styles

6

Revie, Ian Crawford. "The manufacture and evaluation of custom acetabular components for total hip replacement." Thesis, Queen's University Belfast, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.286851.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ameyugo, Gregorio. "Generalized optimization modeling for defense capital planning and equipment replacement." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1996. http://handle.dtic.mil/100.2/ADA322571.

Full text

Abstract:

Thesis (M.S. in Operations Research) Naval Postgraduate School, September 1996.<br>Thesis advisor(s): Gordon H. Bradley. "September 1996." Includes bibliographical references (p. 61). Also available online.

APA, Harvard, Vancouver, ISO, and other styles

8

Gunawardena, Niranjan D. "A methodology for optimising maintenance and replacement of construction equipment." Thesis, Loughborough University, 1990. https://dspace.lboro.ac.uk/2134/7425.

Full text

Abstract:

Mathematical optimisation models are seldom used in making maintenance decisions regarding construction equipment. The reason for this could be, simply, the lack of such models for maintenance of construction equipment compared to those in other areas such as industrial equipment- maintenance. Most of the general mathematical models proposed for industrial equipment maintenance could not be used for construction equipment due to the current state of poor record keeping and narrowly defined maintenance policies currently existing in construction equipment companies. However, some optimisation t

APA, Harvard, Vancouver, ISO, and other styles

9

Bouamra, Omar. "Advances in capital replacement modelling with applications." Thesis, University of Salford, 1996. http://usir.salford.ac.uk/14770/.

Full text

Abstract:

This thesis addresses the capital replacement modelling problems associated with a mixed, or inhomogeneous, fleet and also takes account of the fleet size problem. Applications considered relate to a fleet of buses and a fleet of medical equipment. The initial chapters introduce the notion of capital replacement modelling and review previous work in the field, as well as reviewing the fleet size problem. Replacement policies are also put in the context of the fleet rather than the context of a 'typical plant'. In the third chapter, we present our first attempt to model capital replacement with

APA, Harvard, Vancouver, ISO, and other styles

10

Bushendorf, Jeffrey. "Field study of the 5-Axis Forest-Line versus the 5-Axis Fidia-211 in the case of a midwestern engineering firm." Online version, 2009. http://www.uwstout.edu/lib/thesis/2009/2009bushendorfj.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Replacement of obsolete equipment"

1

A, Salvati Eduardo, ed. Long-term results of cemented joint replacement: Is cement obsolete? W.B. Saunders, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Center, IRT Environment Results, ed. Green Mountain Power: Equipment replacement & remodelling. Results Center, IRT Environment, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hamilton, Ronald. Optimal Replacement Cycles of Highway Operations Equipment. Transportation Research Board, 2018. http://dx.doi.org/10.17226/25036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

P, Krasovskiĭ V., Akberdin Rif Zii͡a︡evich, and Shtanskiĭ V. A, eds. Vozmeshchenie osnovnykh fondov v uslovii͡a︡kh intensifikat͡s︡ii. Ėkonomika, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

ADMINISTRATION, FEDERAL AVIATION. Transceiver Replacement Project (TRP) project implementation plan. Dept. of Transportation, Federal Aviation Administration, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ameyugo, Gregorio. Generalized optimization modeling for defense capital planning and equipment replacement. Naval Postgraduate School, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Krivorot'ko, Yu V. Tekhnicheskoe pereosnashchenie proizvodstva: Finansovye metody upravleniya. Nauka i tekhnika, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Krivorotʹko, I͡U V. Tekhnicheskoe pereosnashchenie proizvodstva: Finansovye metody upravlenii͡a. "Nauka i tekhnika", 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Glikman, Paweł. Systemowe determinanty i kierunki restrukturyzacji majątku trwałego w przemyśle. Poltext, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Natarov, M. V. Optimizat͡s︡ii͡a︡ prot͡s︡essa obnovlenii͡a︡ osnovnykh fondov v uslovii͡a︡kh intensifikat͡s︡ii. Izd-vo Leningradskogo universiteta, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Replacement of obsolete equipment"

1

Hastings, Nicholas Anthony John. "Equipment Replacement Decisions." In Physical Asset Management. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14777-2_26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hastings, Nicholas Anthony John. "Equipment Replacement Decisions." In Physical Asset Management. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-62836-9_26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Jardine, Andrew K. S., and Albert H. C. Tsang. "Capital Equipment Replacement Decisions." In Maintenance, Replacement, and Reliability, 3rd ed. CRC Press, 2021. http://dx.doi.org/10.1201/9780429021565-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pourrahimian, Elyar, Rana Ead, Mohamed El Menshawy, and Simaan AbouRizk. "A Decision Support System for Equipment Replacement." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-62170-3_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Yamashita, Yoshihisa, Isao Tsukamoto, Yoshihiko Kanno, and Hiromichi Suzuki. "Equipment and Monitoring in Continuous Renal Replacement Therapy." In Acute Blood Purification. KARGER, 2010. http://dx.doi.org/10.1159/000314862.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Zichun, Zhenying Deng, Yu Wang, and Linhan Guo. "Optimization modeling of autonomous support with battery replacement for swarm UAVs." In Equipment Intelligent Operation and Maintenance. CRC Press, 2025. https://doi.org/10.1201/9781003470076-71.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lekuona, Alberto, Beatriz Lacruz, and Pilar Lasala. "A Graphical Model for Equipment Maintenance and Replacement Problems." In Applied Decision Analysis. Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-0759-6_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Mora-García, Tlazohtzin, Fernanda Piña-Quintero, and Martha Ortiz-Posadas. "Medical Equipment Replacement Prioritization Indicator Using Multi-criteria Decision Analysis." In Progress in Artificial Intelligence and Pattern Recognition. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-01132-1_31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Vitanov, Valentin, Nikolai Mincoff, and Tanya Vladimirova. "An Application of Goal Geometric Programming to Equipment Replacement Under Fuzziness." In Multi-Objective Programming and Goal Programming. Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/978-3-642-87561-8_22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Zhao, Zhengqing, Lingling Zhang, Daqiang Cang, Yu Li, and Dejian Pei. "Study on the blending coal replacement and combustion rate for the BF PCI process." In Advances in Energy Science and Equipment Engineering II. CRC Press, 2017. http://dx.doi.org/10.1201/9781315116174-58.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Replacement of obsolete equipment"

1

Specht, Fred R. "Control Systems for Induction Heat Treating: Obsolete Methods and the Newest Designs." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0081.

Full text

Abstract:

Abstract This paper examines the evolution and current state of induction heat-treating system controls, ranging from the rudimentary timer and push-button configurations to sophisticated computer systems integrating color touch screens with programmable logic controllers (PLCs). It addresses the challenges of maintaining aging systems, particularly when obsolete components such as PLCs, monitors, or keypads fail and halt production. The discussion encompasses replacement options, upgrade pathways, and emerging control technology and software trends. The presentation provides a comprehensive o

APA, Harvard, Vancouver, ISO, and other styles

2

Johnson, J. G., S. Bigante, and W. H. Julius. "Modification or Repair of Fiberglass Reinforced Plastic (FRP) Structures." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98452.

Full text

Abstract:

Abstract As fiberglass reinforced plastic (FRP) continues to grow as a material of construction in applications such as tanks, packed bed scrubbers, piping, ductwork, and specialty equipment, the number of FRP structures which require repair or which have in some way lost their utility as they were initially designed will continue to grow. In some instances, damaged or obsolete FRP structures may be modified or repaired to a condition which can provide extended service lifetimes; this may result in lower life cycle costs than wholesale replacement. A number of factors must be assessed prior to

APA, Harvard, Vancouver, ISO, and other styles

3

Tavares, Joao A., and Faisal M. Alshammari. "Utilizing 3D Printing in Oil & Gas Applications." In MECC 2023. AMPP, 2023. https://doi.org/10.5006/mecc2023-19931.

Full text

Abstract:

Abstract Additive manufacturing is an advanced manufacturing method where parts get manufactured by joining materials to make objects from 3D model data. The 3D printer stacks layer upon layer of material to form the final object, as opposed to subtractive manufacturing methodologies. 3D printing brings value to businesses by addressing many operational challenges: enabling the production of obsolete parts that are no longer produced by the original manufacturer, reducing the lead time significantly and returning critical equipment back in operation in very short time frame. The process of 3D

APA, Harvard, Vancouver, ISO, and other styles

4

Lyublinski, Efim, Wade Rohland, Yefim Vaks, et al. "Corrosion Protection of Mothballed Equipment." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4335.

Full text

Abstract:

Abstract Existing corrosion protection methods for mothballed equipment during long term (6 months – 10 years+) storage and shipment in unpredictable environmental and application conditions are not always effective. In addition to their limited protection offered, these approaches tend to be cumbersome, complicated, labor intensive and therefore very expensive. This paper describes a system that allows replacement of the technology by using inhibitors in conjunction with nitrogen or a vacuum to achieve highly efficient corrosion protection of any metal part in different environments (vapor sp

APA, Harvard, Vancouver, ISO, and other styles

5

Xiong, Chen, Guillaume Massonnet, and Simon Thevenin. "Reinforcement Learning methods for preventive maintenance and machine replacement problem with second-hand equipment." In 2024 IEEE 20th International Conference on Automation Science and Engineering (CASE). IEEE, 2024. http://dx.doi.org/10.1109/case59546.2024.10711460.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Allen, L. F., and J. G. Svinos. "Rod Pumping Optimization Program Reduces Equipment Failures and Operating Costs." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85140.

Full text

Abstract:

Abstract In 1975, an intensive program was initiated by Gulf Oil E&P Central area to reduce rod and tubing failure rates in the fields of the northwest corner of Crane County, Texas. Chronologically the program steps were: 1) The replacement of rod strings experiencing three failures in three months. 2) The replacement of tubing strings experiencing two failures in three months. 3) The use of inspected, classified and plastic coated new or used grade "C" rods. 4) The use of inspected, classified and internally plastic coated used or new tubing. 5) The exclusive use of high working stress r

APA, Harvard, Vancouver, ISO, and other styles

7

Hoy, Edgar F. "The Removal of Arsenic-Based Inhibitors from Petrochemical Equipment." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88218.

Full text

Abstract:

Abstract Environmental concerns have forced the discontinuance of arsenic compounds as inhibitors in the petrochemical industry. This environmental concern has led to their replacement with either less toxic antimony or organic inhibitors. During the change of inhibitor systems, arsenic removal and toxic arsine gas production are major concerns. Arsenic dissolution rates, total scale removal, and arsine gas production were compared using several commercial solvents. Laboratory and field data confirm that a two-stage solvent involving tetraammonium ethylenediaminetetraacetic acid and hydrogen p

APA, Harvard, Vancouver, ISO, and other styles

8

Akuchie, Christian. "Novel External Corrosion Prevention Equipment Lifecycle Management Approach." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-19415.

Full text

Abstract:

Abstract This paper presents an external corrosion prevention equipment lifecycle management approach that aligns with and supports the transition of equipment from a reactive maintenance approach to a reliability-centered and conditioned-based maintenance approach. The lifecycle assessment is comprised of deterministic (remaining life estimate), probabilistic (probability of failure) and fitness for service approaches. The process output is a prioritized and optimized management plan for a set of equipment critical in the external corrosion threat prevention on mainline piping, facility pipin

APA, Harvard, Vancouver, ISO, and other styles

9

Greenwood-Sole, Graham. "Long Term Corrosion Protection and Refurbishment of Process Equipment, Using Glassflake Filled Composite Linings." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08518.

Full text

Abstract:

Abstract Glassflake filled polyester, vinyl-ester and epoxy systems have proven track record’s of long term corrosion protection in aggressive service applications, with design and actual life for many applications being measured in decades rather than years. Significant improvements have been achieved during the past decade both in resin and glassflake technology. The application properties and application techniques of these specialist polymer linings have also advanced considerably. Capital equipment can often be refurbished using heavy-duty glassflake linings without the need for replaceme

APA, Harvard, Vancouver, ISO, and other styles

10

Greenwood-Sole, Graham. "Effective Corrosion Protection for New and Old Nuclear Power Station Cooling Water Systems." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01408.

Full text

Abstract:

Abstract Glassflake filled polyester, vinyl-ester and epoxy systems have proven track records of long term corrosion protection, even in aggressive service applications, with design and actual life for many applications being measured in decades rather than years. Capital equipment can often be refurbished using glassflake linings without the need for replacement parts and at a fraction of the replacement cost. On new equipment, carbon steel is often being used with glassflake linings for corrosion protection, as a very cost-effective alternative to metallurgical solutions. With proven and des

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Replacement of obsolete equipment"

1

WOODS HOLE OCEANOGRAPHIC INSTITUTION MA. Replacement of Obsolete Science Winch on Research Vessel KNORR (AGOR 15). Defense Technical Information Center, 1989. http://dx.doi.org/10.21236/ada273366.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Teji, D. HVAC equipment replacement for best size and efficiency. Office of Scientific and Technical Information (OSTI), 1988. http://dx.doi.org/10.2172/5957503.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Teji, D. HVAC equipment replacement for best size and efficiency. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5817895.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Blazer, Douglas J. Analysis of the Air Force Equipment Replacement Forecasting Method. Defense Technical Information Center, 2005. http://dx.doi.org/10.21236/ada442123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Richman, Eric E. Standard Measurement & Verification Plan for Lighting Equipment Retrofit or Replacement Projects. Office of Scientific and Technical Information (OSTI), 2009. http://dx.doi.org/10.2172/967933.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Dohrmann, Donald R., and G. A. Wikler. Market Study of Commercial Appliances: Volume 2, Replacement Market for Heating, Ventilation and Air Conditioning and Water Heating Equipment: Final Report. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/6111786.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Beck, Griffin. Final Report - Development and Field Testing Novel Natural Gas Surface Process Equipment for Replacement of Water as Primary Hydraulic Fracturing Fluid. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1804085.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Avis, William. Responsible E-Waste Value Chains in Africa. Institute of Development Studies (IDS), 2022. http://dx.doi.org/10.19088/k4d.2022.015.

Full text

Abstract:

Population growth, increasing prosperity and changing consumer habits globally are increasing demand for consumer electronics. Further to this, rapid changes in technology, falling prices, increased affordability and consumer appetite for new products have exacerbated e-waste management challenges and seen millions of tons of electronic devices become obsolete. This rapid literature review collates evidence from academic, policy focussed and grey literature on e-waste value chains. The report should be read I conjunction with an earlier report on e-waste management. E-waste is any electrical o

APA, Harvard, Vancouver, ISO, and other styles

9

Avis, William. Technical Aspects of e-Waste Management. Institute of Development Studies, 2022. http://dx.doi.org/10.19088/k4d.2022.051.

Full text

Abstract:

Population growth, increasing prosperity and changing consumer habits globally are increasing demand for consumer electronics. Further to this, rapid changes in technology, falling prices, increased affordability and consumer appetite for new products have exacerbated e-waste management challenges and seen millions of tons of electronic devices become obsolete. This rapid literature review collates evidence from academic, policy focussed and grey literature on the technical aspects e-waste value chains. The report should be read in conjunction with two earlier reports on e-waste management1. E

APA, Harvard, Vancouver, ISO, and other styles

10

Iyer, Ananth V., Samuel Labi, Steven R. Dunlop, et al. Heavy Fleet and Facilities Optimization. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317365.

Full text

Abstract:

The Indiana Department of Transportation (INDOT) is responsible for timely clearance of snow on state-maintained highways in Indiana as part of its wintertime operations. For this and other maintenance purposes, the state’s subdistricts maintain 101 administrative units spread throughout the state. These units are staffed by personnel, including snow truck drivers and house snow removal trucks and other equipment. INDOT indicated a need to carry out value engineering analysis of the replacement timing of the truck fleet. To address these questions, this study carried out analysis to ascertain

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!